CasaLambretta - Spare Parts Catalogue 2013

How to place an order for spare partsThe purchase of CasaLambretta spare parts can be made in various ways:1. Visiting the shop at our Rodano headquarters.2. Visiting one of the many CasaLambretta concessionaires or authorised dealers. 3. Ordering parts on-line (or by fax) from one of the many CasaLambretta concessionaires or

authorised dealers who offer mail order services and / or on-line shopping facilities on theirdedicated web-stores.

Whichever method you choose, to enable all orders to be processed easily and within the quickestpossible timescale, we advise all customers to utilise the CasaLambretta part codes contained withinthis catalogue. The CasaLambretta range of spare parts contained within this catalogue is vast andshould cover all the parts you may require for any restoration or repair work. If on the contrary yourequire a part / parts that are NOT to be found within the pages of this catalogue, you may order themutilising the codes found within the original Innocenti part catalogues. When ordering using Innocenticodes, please be sure to clearly state the name of the catalogue used, along with the section (Table),part description(s) and part number(s). Copies of the original Innocenti workshop manuals, handbooksand parts books can all be purchased within the dedicated section contained within the rear of thiscatalogue. As is CasaLambretta tradition, spare part kits (example: floor runner set kits) all contain completededicated packets of fasteners & fixings, which will definitely prove to be a massive help when fittingthe spares in question to your scooters. If you are unsure as to quantities of certain parts needed fora specific job, when ordering please inform your CasaLambretta concessionaire or authorised dealer,who in turn will be able to supply you with the correct quantities needed. The CasaLambrettadistributors are all there to help you achieve a perfect restoration for your scooter.Certain very rare items are only available in second hand/used/serviceable condition. We ask that inthe case where parts such as these are possibly needed, it is better to initially ascertain if it is better –and possibly more economically viable – to repair the damaged part you have rather than place anorder for the same. All CasaLambretta parts are covered by a complete guarantee. In the case that a part turns out to bedefective or flawed, it will immediately be changed without the customer incurring any additionalpostage costs. To see a full, up-to-date list of all the current CasaLambretta concessionaires, authorised dealers andto see all the latest news & products, please visit: www.casalambretta.it

Important!

All prices contained within this

catalogue are in Euro and are

solely for the Italian home market.

To find the prices for Casa

products in your country, please

contact your local distributor!

A view of the CasaLambretta WorkshopVittorio with his friend Walter Scheffrahn, the Worldwide ownerof the Lambretta brand name.

THE FIRST PROFESSIONALLAMBRETTA CENTREIN ITALY!This is CasaLambretta’s ‘Italian Product’ philosophy: for the last 30 years we havecommitted ourselves to producing Lambretta spare parts in Italy. The reason for this isthat we firmly believe in Italy and the professional ability of Italian Artisans to producehigh-grade products. A spare part that has been expertly hand-made here in Italy is aguarantee both for quality and safety. Now, more than ever, Italy needs to believe in itsbusinesses and even our small contribution is a step in the right direction to increasenational industrial activity, something that we are all positively waiting for and sure willhappen. Unfortunately, for certain types of spare parts, it was simply impossible to manufacturethem here in Italy and we were obliged to out-source the production to other Europeanor Asian counties. In order to make it crystal clear where each and every part containedwithin this catalogue has originated from, we have introduced a system wherebysymbols are used to indicate the origin of spare parts. Therefore it’s now possible to seeif a part is of Italian construction, or produced elsewhere. Italian made parts have nosymbol. If a part is of European construction it will be denominated with a star “✩”symbol whereas a sun symbol “�” indicates a part is of Asian construction. The CasaLambretta team welcomes you to the headquarters situated in Via Kennedyno. 38, in Rodano on the outskirts of Milan. These are the staff of CasaLambretta andtheir respective roles which ensure the smooth day-to-day running of the business:

In the Workshop:Mario, the head mechanic. He is in charge of and co-ordinates the running of theworkshop area.Maurizio, an expert craftsman specialising in the ‘conserved restoration’ of Lambrettaand Rumi scooters.Fabio, an expert in vintage and historical scooters.

In the Stores:Vittorio, the owner of CasaLambretta. He is responsible for organising the productionand quality control of all CasaLambretta products.

In the Shop:Orietta, the shop manager. She is in charge of the retail shop and business liaisons withcustomers.

In the Museum:Vittorio, the historical curator and guide for the museum.Andrea, who is Vittorio and Orietta’s son. He is the official guide for all the youngerLambretta fans.

Maurizio Mario

Andrea Fabio

Spare parts store house

Orietta

The Scooter and Lambretta MuseumThe initial idea to create a museum dedicated to Lambretta scooters came about 20years ago thanks to Vittorio Tessera. With help from his friends, Vittorio wanted tocreate a museum to celebrate the production of the World famous Lombard madescooter: the Lambretta. Over the following years, the museum continued to expandthanks to the constant addition of vehicles from all over the World. Vittorio’s passionfor all makes of vintage scooters, not only Lambrettas, was the reason that themuseum subsequently evolved into the ‘Scooter & Lambretta Museum’ and quicklybecame the landmark in Europe for vintage scooter production. Today, with the entirecollection on display within a dedicated 800sq.m exhibition area, the ‘Scooter &Lambretta Museum’ is without doubt the most important museum for Lambrettas andvintage scooters in the World. The main central area of the museum, called ‘theArena’, is the section dedicated exclusively to display Lambrettas. Here you can findeverything from the standard production machines from all over the World, toprecious, unique Innocenti prototypes, through to an incredible collection ofmemorabilia and trophies actually won by Innocenti. There are another seven areaswithin the museum and these are dedicated to the Worldwide evolution of the scooterfrom the early 1900’s through to the 1970’s and there is also a section dedicated solelyto Vespa production where the most historically significant models are on display. Themuseum is unique in that a lot of time and thought has been put into its layout toensure that you can clearly see all the scooters, from all angles and from close up.This unprecedented access gives you the chance to marvel at the machines ondisplay, which include historically important rarities such as; the American-madeSalisbury Aeromotor Glide which was the first automatic scooter dating back to 1938,the Juno K which was the first scooter made by Honda in 1954, the Fuji Rabbit whichwas the first scooter made in Japan back in 1947 and the first French-made Scootaviaever produced, having a No.‘1’ frame number. as far as Lambretta in concerned, themuseum hosts both all the classic production models, and rarities such as; the V twin250cc Lambretta GP motorbike, a prototype TV175 Series 1, the earliest knownModel A which has a No.‘2’ frame number, original factory Racers through to anexample of an original Special 150 used by the New York Police Dept. Over 60 modelsare on display in a unique and accessible environment. The museum has freeadmittance and the opening hours are: 9am – Noon & 2.30pm – 530pm, Monday –Friday. It’s also possible to pre-book a guided tour in other hours for large groups bycalling: ++39 02 95320438. A preview of the museum can be seen on the dedicatedwebsite: www.museoscooter.it On the website there is also a link to access the mainCasaLambretta website, where it’s possible to post up private adverts to buy or sellvintage scooters and Lambrettas.

CONCESSIONARIES & AUTHORISCASA LAMBRETTA AROUND THE WORLD

CASALAMBRETTA FRANCESamuel Moulet

Tel. 0033 626511182

MARCO’S SCOOTER SHOPTel. e Fax 0043 5522 76280

CASALAMBRETTA UKTel. e Fax 0044 1934 641614

A.S.M. SCOOTERTrigueros Fernandez Rafael

Tel. 0034 952 332622

SCOOTER CLASICORafael

Tel. 0034 667845747

SWISS FRANCEMOCELLINI Pascal

Tel. 004179 941 45 98

SWISS GERMANYKARL BURTSCHER

Tel. e Fax 0041 071 3931356

DAMI MOTORPECASIMPORTADORA LTDA

Luigi De FilippisTel. 5031 8046

BRAZIL

FRANCE

AUSTRIA

PORTUGAL

SPAINSWITZERLAND

GERMANY

SCOOTER CENTER GmbHTel. 0049 2238 307430

USA

JET200 Performance LtdTel. 1-866-lambretta - 1-206-9485495

SCOOTER SURGERYTel. 0044 020 87480882

U.K.

ORIGINAL VESPATel. e Fax 00351 21 9800665

PIAGGIO SPORTFernando Botero

Tel. 445 8956

COLOMBIA

MILVERTON’STel. 0044 121 772 4517

SED DEALERS

SCOOTER ITALIANOTel. 348 3033266

LAMBRETTA POINTChiozzi Guido e PaoloTel. e Fax 0532 62814

LAMBRETTA SERVICETel. 0831 692487

SAIGON PARTS and ACCESSORIESVietnam: Tel. 0084 (0)937075630-0084 (0)908517002

Thailandia: Tel. 66 2216 4441 3

SCOOTER SHOPKostas Kirou

Tel. 0030 2310 869097

TORINO LAMBRETTATel. 011 4378128

RIMINI LAMBRETTA CENTREDean Orton

Tel. 0541 947492

PESCARA LAMBRETTACell. 347 7608917

ASIA

AUSTRALIA

CASALAMBRETTA AUSTRALIADe’ Pannone EnterpriseTel. 0061 8 93873031

LAMBRETTABILITYTel. e Fax 044 7887311

GREECE

CASALAMBRETTA POLAND“Greg” Grzegorz Sojka

Tel. e Fax 0048 32 2222341

SWEDEN

CASALAMBRETTA SCANDINAVIAMarcello Colombo

Tel. e Fax 0046 174 40022

© DiskArt™ 1988

© DiskAr t™ 1988

SCAFUTO SRLTel. 081 287521

JAPAN

POLAND

LAMBRET...TIAMOTel. e Fax 0923 534591

ITALY

BELGIUM

SCOOTER PASSIONTel. 0495 346657

CASA LAMBRETTA

CONCESSIONAIRESCasaLambretta spare parts are not only available fromthe Rodano headquarters but they can also bepurchased at the most important Lambretta shops.

RIMINI LAMBRETTA CENTRE - DEAN ORTONVia Gessi, 14 - 47040 Tribola di Borghi (FO) - Tel. & Fax. ++39 (0541) 947492 (2 lines)

www.riminilambrettacentre.com & www.lambretta5speed.com Email: [email protected] & [email protected]

Rimini Lambretta Centre (‘RLC’) is a shop specialising in all aspects of Lambretta. RLC pridesitself on being an original Casa Lambretta dealer, working closely with Vittorio Tessera on thecontinual evolution of new Casa products. The shop is known throughout the World for theattention-to-detail applied during their restorations and projects, many of which have beenfeatured in magazines and used in the media on a worldwide scale. Apart from the fully equippedworkshops, RLC is also geared up to send out dozens of parcels each day as rapid national &international mail order is our speciality, thanks to the level of Casa Lambretta spare parts wekeep in stock. Within our stores we also hold masses of tuning and special parts, such as thefamous ‘Cyclone 5 Speed’ Lambretta gearboxes designed and manufactured by us at RLC. Allthe staff at RLC are daily Lambretta riders and we pride ourselves on providing a service wherewe can honestly say we only use, fit and sell parts we ourselves utilise on our own scooters.

LAMBRETTA POINTCHIOZZI GUIDO e PAOLO

Via Degli Olivetani, 36 - 44100 FERRARA - Tel. & Fax 0532 62814www.lambrettapoint.com - E-mail: [email protected]

For over 20 years the Chiozzi family dedicated itself with great passion to recovery ofLambrettas and spare parts. Nowadays this hobby has grown into a professional business.Lambretta Estense was born to the purpose to serve the lambretta’s friend in every demand:restoration, repairs, spare parts and historicaladvice. In the large shop rooms are alwaysLambretta’s models of every age available for sale, from 1948 to 1970, restored or to restore.Moreover it is possible to buy exclusively Lambretta’s manuals, accessoires, gadgets.

SCOOTER ITALIANOVia Pordenone 17 - San Quirino (PN)

Tel. & Fax 0434-918716

Scooter Italiano has become a landmark for Lambretta riders of Veneto and Italy by now. Theirmore than 10-year experience in this business allow them to satisfy their customers, followingthem in every step of their Lambretta. At their shop people can find a professional and carefulservice followed up directly by the shop owner. There is also a wide range of accessories,gadgets and unique items of clothing.

TORINO LAMBRETTAPiazza Peyron 5/E - 10143 Torino

Tel. & Fax 011 4378128 - Mob. 331 5266288 - E-mail: [email protected]

A completely new shop entirely dedicated to Lambretta. The shop is located in the city centreof Turin and it deals with the supply of spare parts and technical services for all Lambrettamodels. The shop owners, Roberto and Armando, are always on hand for an advice orassistance.

SCAFUTO SRLCoso Lucci, 27 - 80142 Napoli

Tel. 081 287521 - www.lambretta.me

This is one of the most famous Neapolitan spare parts storehouse. The strong point of ScafutoSRL are professionalism and the attendance upon customers. Nowadays, together with CasaLambretta, Scafuto SRL distributes spare parts for all Innocenti scooters, being always seriousand efficient in its work. At Scafuto’s people can find a workshop for cylinder grinding and awide range of pistons and piston rods for every national brand.

ITALY

ITALY

ITALY

ITALY

ITALY

CASALAMBRETTA UKUnit 3 & 4, Oakwood business park - Oldmixon crescent

BS24 9AY Weston Super MareTel. & Fax 0044-1934-641614 - www.scootopia.com - E-mail: [email protected]

Scootopia is a spare parts supply centre for all England, besides it is also a workshop for themanufacture of accessories for all vintage scooters. The quality and perfection of its productsare well- known and appreciated by Lambretta riders all over Europe.

U.K.

LAMBRETTA SERVICEVia Salvo d’Acquisto - 72020 Torchiarolo (BR)

Tel. 0831 692487 - www.lambrettaservice.it

Enzo del Giudice is a very passionate Lambretta rider and he is one of the most importantpersons at Lambretta Club Puglia. He has realized the brand new Casa Lambretta centre inPuglia. In the wide and bright spaces of his shop people can find everything they need for theirLambrettas. The staff is always kind and on hand and people can always count on an adviceof a very experienced Lambretta rider like Enzo.

ITALY

PESCARA LAMBRETTAVia Fonte Borea, 1 - 65100 Pescara

Tel. 085 2908467 - Mob. 347 7608917

A centre entirely dedicated to Lambretta. Spare parts are immediately available, a carefulrestoration and reparation service, free technical councelling for every Innocenti scooter.

ITALY

LAMBRET...TIAMOVASCO ROSALIA

Via Del Melograno, 11 - 91100 TrapaniTel. & Fax 0923 534591 - Mob. 328 5483464 - www.lambrettiamo.com

This is a new company but of old and reliable experience. Here people can find everything theyneed for the restoration of their Lambrettas. The staff is professional and expert, people canask for technical advice and there is a fast shipping service for spare parts.

ITALY

SCOOTER SURGERYArch 219 - Trussley Road - Hammersmith - London W6 7PP

Tel. 0044-020-87480882 - Fax 0044-020-87496550www.scootersurgery.co.uk - www.lambrettahouse.co.uk - E-mail: [email protected]

Very close to the London city centre, Scooter Surgery is one of the new Casa Lambrettaauthorized dealers. Patch, the shop owner, is an old hand at every Lambretta mode, from LImodels to the oldest D-LD models. A shop and a professional assistance service forrestoration and tuning are available at Scooter Surgery’s.

U.K.

ScooterSurgery

MILVERTON’S21-23 Kyotts Lake Rd. - B11 1JX Birmingham

Tel. 0044 121 772 4517 - Fax 0044 121 771 1904

First established in 1948, it’s one of the most important spare parts dealer for motorcycles inEngland. John Milverton is specialized in tyres, oils, chains and accessories for all the modelsof motorcycles produced nowadays. The Lambretta section is always well supplied and spareparts are immediately available. John Milverton LTD is a trade only wholesales and suppliesdealers throughout the UK.

U.K.

SCOOTER CENTER GmbHLudwig Erhard Str. 1 - 50129 Bergheim-Glessen - Tel. 0049-2238-307430

Fax 0049-2238-307474 - E-Mail: [email protected]

This is the most famous shop in Germany for the sale of Italian scooters. The shop owners areyoung and enthusiastic and are able to help you with every kind of requests: spare parts,assistance, restorations, technical advice and sale.

MOCELLINI PASCALImpasse des Chataigniers 1 - CH -1898 SAINT-GINGOLPH

Tel. 004179 941 45 98 - E-mail: [email protected]

Pascal is very keen on Lambrettas he offers his competence to many Lambretta riders livingin the French Switzerland.

KARL BURTSCHERWilerstrasse 198 / Postfach 65 - CH-9230 Flawil Botsberg Svizzera

Tel. & Fax 0041-071-3931356 - Mob. 0041-079-6963409E-mail: lambretta_flawil&bluewin.ch

Karl’s garage is definitely a landmark for all the Swiss Lambretta riders. He has been workinghard and passionately at restoring and fixing Lambrettas for more than 30 years.

CASALAMBRETTA SCANDINAVIAMarcello Colombo

Ronnvagen 18 - 740 12 Knutby - Tel. & Fax 0046-174-40022Mob. 0046-70-6348264 - E-mail: [email protected]

Motorcycle and then scooter rider, Marcello has dedicated all his spare time to his passion forLambretta since 1979. In 2002 he opened a shop in Sweden in order to help all the Lambrettariders in Scandinavia (Sweden, Denmark, Finland, Iceland and Norway). A customer ofMarcello’s shop once said: “There are far more spare parts nowadays in Sweden than in thewhole 1970s”.

GERMANY

SWITZERLAND

SWITZERLAND

SWEDEN

JET200 Performance Ltd4237 Josephine St. #101 - 80216 Denver CO USA

Tel. 1-866-lambretta - 1-206-9485495www.jet200.com

There is a Casa Lambretta also in Colorado and more precisely in Denver, the capital city.Jon is the shop owner and he coordinates his skilled mechanics who can transform a wreckin a brand new Lambretta. At this shop people can find a fast overhaul service for every kindof engine.

USA

Scooter Passion Rue du Tahay - 4357 Limont

Tel. 0495-346657 - www.casalambretta.beE-mail: [email protected]

A new centre totally dedicated to Lambretta and Vespa specialized in tuning andelaborations. Fabio is very passionate and works with competence at every vintage scooter.

BELGIUM

A.S.M. SCOOTERTrigueros Fernandez Rafael

C/Antipla 2 - 29003 MalagaTel. 0034 952 332622 - Fax 0034 952 346924 - Mob. 0034 628 839985

www.asmscooters.com

It’s definitely the most important Lambretta Centre in Spain. A.S.M. Scooters is in Malaga,it as a large spare parts storehouse and a wide range of second-hand Lambrettas of variousmodels and years. In this shop people can find a well-equiped garage for restorations andassistence.

SCOOTER CLASICORafael

c/Sara Martin 33 - Tudela de Duero - Valladolid - SpagnaTel. 0034 667845747 - E-mail: [email protected]

Rafael is passionately interested in all Vespa and Lambretta scooters. He is very skilled in theServeta, a Spanish model, but also in Vespas manufactured by Moto Vespa in Spain. Rafaelis skilled and kind and in his shop people can always find a professional help.

ORIGINAL VESPARua Cor. Joao Bras de Oliveira 15 R/c - 1685-581 Canecas

Tel. & Fax 00351-21-9800665 - www.originalvespa.com

Original Vespa is not only Vespas, it’s Lambrettas too! All the range of Casa Lambretta itemsis available for purchase in this wellstocked storehouse. People can also find a wide rangeof spare parts for vintage Vespas.

SPAIN

SPAIN

PORTUGAL

CASALAMBRETTA POLAND“Greg” Grzegorz Sojka

Ul. Partyzantow 1 - 41-400 Myslowice - Tel. & Fax 0048-32-22-22-341Mob. 0048-503-80-34-43 - E-mail: [email protected]

Greg offers all the customers a high-quality service for every kind of Lambretta. This shopoffers restorations, spare parts and advice all around Poland.

POLAND

LAMBRETTABILITY958 Shiboguchi - Takatsu, Kawasaki

Kanagawa 213-0023 Japan - Tel. & Fax 044-788-7311E-mail: [email protected] - www.lambrettability.com

We offers all the customers a high-quality service for every kind of Lambretta. This shopoffers restorations, spare parts and advice all around Japan.

JAPAN

CASALAMBRETTA FRANCESamuel Moulet

265 Rue Louis Rigaud - 73100 Aix Les BainsTel. 0033-626511182 - www.casa-lambretta.fr

This new shop in the south part of France is managed by Samuel, who is a great Lambrettafan, and is overviewed by Jean Claude Mazzella, president of the Lambretta Club France.Kindness and professionalism are always on your disposal and, together with the wide rangeof spare parts, are the landmark of this recently open shop.

FRANCE

SAIGON PARTS and ACCESSORIES Vietnam: N° 22 street 65, Lot X, Tan Qui Dong residential Area, Tan Phong Ward,

District 7, Hochiminh-City - Tel. 0084 (0)937075630-0084 (0)908517002www.casalambretta.vn www.saigon-parts-accessories.com

Thailand: Thai Charoen Alai Yon - 1:3-4 Rongmuang 5 - Pathumwan 10330 BangkokTel. 66-2216-4441-3 - Fax 66-2215-1654 - E-mail: [email protected]

SAIGON PARTS and ACCESSORIES (S.P.A.) is a new company located inHochiminh-City, very close to town center. Managed by Alain, a French man,which has more than 10 years experience in the scooter business, S.P.A. is thesole importer and distributor of Casa Lambretta parts for Vietnam and Thailand.A complete range of Casa Lambretta parts and a selection of tuning parts andaccessories from Italy are available. S.P.A. is also well supplied with spare partsfor vintage Vespa. Alain and his staff are always at disposal to satisfy customerswith quality service and reliable experience.

SCOOTER SHOPKostas Kirou

Solonos - Psaron 1 - 54642 ThessalonikiTel. 0030-2310-869097 - Fax 0030-2310-811589 - E-mail: [email protected]

It’s a shop specialized in the purchase of Italian Vespa and Lambretta scooters.Professionalism and great experience, which are its trademarks, make it the most appreciatedscooter centre all over Greece.

CASALAMBRETTA AUSTRALIADe’ Pannone Enterprise

112 Nansonn st. - 6014 Wembley - Perth - Western AustraliaTel. 0061-8-93873031 - Fax 0061-8-93871140 - Mob. 0401-619-982

E-mail: [email protected] - www.casalambretta.com.au - www.lambrettahouse.com

De Pannone Enterprise is a well- known spare parts stockhouse and in the last years it hasalso become “Casa Lambretta Australia”. which deals with the purchase and distribution ofCasa Lambretta spare parts. The landmarks of this shop are the great experience of theshop owner and the well-stocked storehouse.

VIETNAM

THAILAND

AUSTRALIA

© DiskArt™ 1988

© DiskArt™ 1988

GREECE

DAMI MOTORPECAS IMPORTADORA LTDALuigi De Filippis

Rua Eduardo De Magalhaes 25 - Pq. Jabaquara San PauloTel. 5031 8046 - Fax 5031 2279

Luigi has been dedicated himself for more than 40 years to the restoration of old Lambrettasmanufactured in Brazil under Italian licence. He is specialized in LD and LD second seriemodels.

BRAZIL

PIAGGIO SPORTFernando Botero

Calle 33/A # 11H - 46 Cali Valle ColombiaTel. 445-8956 - Fax 445-3347 - E-mail: [email protected]

www.piaggiosport.com

Piaggio Sport is definitely a landmark for Colombian scooter riders. This shop doesn’t sellonly Vespa spare parts: a wide range of parts for LI and SX Lambretta are always availablethere and always with Casa Lambretta quality guaranteed.

COLOMBIA

MARCO’S SCOOTER SHOPReichsstrasse 98 - 6800 Feldkirch

Tel. & Fax 0043 5522-76280 - E-mail: [email protected]

Marco’s scooter shop has already become a very reliable name in Austria even if this shopwas opened just few years ago. At Marco’s there is a wide choice of scooters and a wellstocked spare parts storehouse. There is also a garage for every kind of reparations.

AUSTRIA

www.lambretta.me • www.riminilambrettacentre.comwww.casa-lambretta.fr • www.casalambrettauk.com

www.scootercenter.com • www.casalambretta.bewww.lambrettaservice.it • www.jet200.com

CENTRO RESTAURONicolò Di PaolaVia Germania 1/393012 Gela (CL)

Tel./Fax 0933 824537Cell. 347 5050892

ITALY

CASA DELLA MOTO

Schirinzi Pasquale

Via Torre S. Susanna 1272024 Oria (BR)

Tel. 0831 845021

ITALY

CENTRAL RICAMBI srlVia Vincenzoni 15

62010 Montecassiano (MC)Tel. 0733 290660Fax 0733 290666

www.centralricambi.com

ITALY

CLASSIC MOTORPedretti Angelo

Via Traversa di Gavardina I°Trav. int. n. 12/D

25081 Bedizzole (BS)Tel./Fax 030 6872074

ITALY

CHRISTIAN VAN HEULE

17 Rue De Houtain B-4682 Heure Le Romain

Tel./Fax 0032-04-2864894

BELGIUM

SCOOTERPRODUCTS

30-32 the BoulevardWeston-Super-Mare United Kingdom

Tel./Fax 01934-417834www.scooterproducts.com

U.K.

CASA LAMBRETTA AUTHORIZED DEALERS

Exclusive dealer for books and calendars

NEW ONLINE SHOPS

SPARE PARTS CATALOGUE & PRICE LISTS 2013

14

Lambretta 125 m (A)125 A produced from October 1947 to October1948 in 9.669 exemplars.First frame number: 5.001

Identification particulars 125 A:First version up to frame number 6.900Front square seat, straight gear foot controllever, tool box closure with key, mechanical foothorn, chrom-plated rims.

Second version up to frame number 11.000Front triangular seat, normal tool box closure,electric horn, painted rims, inclined gear footcontrol lever (straight up to nearly 8.000), rearfoot-brake on the opposite side of the gearlever (only for the last 1.000 of the secondseries).

Third version up to frame number 14.700Front triangular large seat with one horizzontal-spring, cast iron center stand.

Lechler coulors code systemOlive-dark-Green 8022 • Dark Red 8020 •Bluette 8017 • Ivory not available

Painting schemes:First versionAll in the same Green or Red or Blue or Ivorycolour, except the seat in the matt Black colourand the chrom-plated rims.

Second versionAll in the same Green, Red, Blue or Beigecolour, except the frame of the anterior seatand the rims coulored with Aluminium FIAT 690.

Third versionAll in the same Green, Red, Blue or Beige colour,except the frame and the holdinsof the frontseat, the rims, the wheel hubs, the central standpainted with aluminium colour FIAT 690.In this last one serie the polished horn, notpainted as in the previous series.

Motor carters, the carburettor, the air-filter andthe fly-wheel cover are always painted withaluminium colour FIAT 690.

Code Code Description Model PriceInnocenti


ENGINEM 1 2M1026 Piston size 52 and more A 48,00M 24 2M1041 Rod complete kit A 72,00M 243 2M301 Conrod bush 14 mm A 6,00M 42 2M1051 Crankshaft complete A 200,00M 108 Engine oil seal kit A 18,00M 125 2F1016 Clutch plates (3 pieces) Surflex A 38,00M 125/B 2F1016 Kit Clutch plates Surfelx with springs A 40,00M 154 2M411 Kick start return spring A 8,00M 160 2M435 Kick start gear pinion 13 teeth A II-III series 24,00M 163 Engine gasket kit A 26,00M 185 2T1311 Nickelizet silencer A 150,00M 186 2T1026 Chrome manifold A 60,00M 21 2T1046 Gear box alloy pedal A II-III series 60,00

M 20 2T1316 Gear box under right foot board A 300,00M 202 ✩ 2M122 Gear bearing (6201) A 8,00M 204 ✩ 2M316 Crankshaft bearing (6203) A 10,00M 210 ✩ 2F165 Clutch bearing (98205) A 75,00M 205 ✩ 2TR316 Rear axe bearing (98204) A 54,00M 220 2M303 Needle bearing kit for rod A 5,00M 221 2C109 Needle bearing kit for gear A 5,00M 223 2F116 Bearing kit for clutch/steering A 1,50

SUSPENSIONST 209 2ST152 Rebound buffer A 1,50T 2 2ST133 Pin internal upper A 20,00T 3 2ST129 Pin external upper A 20,00T 4 2ST124 Pin internal lower A 20,00

Lambretta 125 m first series.

Maintenance datas

Mixture 5% Spark plug 225 Bosch short screwMotor oil sae 15/50 180 gr. Oil transmission sae 15/50 200 gr.Carburettor MA 16 mainjet 65 pilotjet 45 valve 55Ignition advance 26° 33 mm on the flywheel circumference

And ’out the new book “Lambretta accessories” with hundreds of original illustrations.

Lambretta 125 m second series.

Lambretta 125 m third series.

LAMBRETTA 125 m (A)

15



T 5 2ST124 Pin external lower (size + 0,5 mm) A 20,00T 6 2ST116 Pin external lower (size normal) A 20,00T 11 Cone kit for fork A 60,00

WHEELST 169 � 2R503 Tyre original pattern 3.50 X 7 A 85,00T 170 � 2R1036 Tube 3.50 X 7 A 15,00T 115 2R1016 Front brake lever A 10,00T 116 2R136 Spring for front brake lever A 5,00M 202 ✩ 2M122 Front hub bearing (6201) A 8,00T 120/B 2R137 Front hub oil seal A 3,00T 121 2R138 Front hub brake lining A 10,00T 122 3R806 Rear hub brake lining A 12,00

STANDST 200 2T510 Stand spring A I II series 10,00T 201 2T510 Stand spring A II 1/2 III series 6,00T 202 2M127 Stand pin with special nut A 10,00

BODY PLASTIC/RUBBERC 80 2T142 Floor rubber kit grey (6 pieces) A 10,00C 6 2T142 Floor rubber kit green (6 pieces) A 10,00C 7 2S106 Petrol rubber kit (2 pieces) green A 8,00C 8 2S106 Petrol rubber kit (2 pieces) grey A 8,00C 9 2S121 Filler cap round gasket A 1,00C 9/B 2S1136 Filler cap black A 10,00C 10 2S5O4 Tank round buffer A 2,00C 11 2S503 Luggage box round buffer A 1,00C 13 2S503 Luggage box gasket A 3,00C 14 3S531 Luggage box/engine spacer leather A 10,00C 15 3M436 K/starter pedal protection A 6,00C 16 3T714 Brake pedal protection A 3,00C 19/B 2S502 Luggage box cover grommet A 1,00C 17 Horn ring rubber A 3,00C 20 2T145 Brake pedal round buffer A 1,00C 21 2T124 Pair passenger pedal rubber A 20,00

LOCKSC 129 2S1116 Luggage box lock A 50,00

BADGEC 143 2TR110 Round rear transmission emblem chrome A 40,00C 144 2S1101 “Lambretta” luggage box badge A 15,00C 145 2ST1061 Front fork “Innocenti” badge A 30,00

BODY METALC 230 � 2S514 Luggage box cover A 60,00C 232 2T196 Floor channel chrome kit (6 pieces) A 72,00C 233 2T193 Floor channel end cap A 4,00C 234 2T147 Foot board pin support A 10,00C 235 2T161 Gear indicator A 55,00C 236 2S573 Luggage box cover pin A 4,00C 237 2S573 Luggage box cover pin + 0,5 mm A 4,00C 239 2T703 Brake pedal bush A 3,00C 319 2A136 Headlight support between the handlebar A 50,00

SEATSC 321 Complete leather square seat A I series 240,00C 322 Front cover seat ivory A II series 48,00C 323 Rear cover seat ivory (square type) A 48,00C 324 Front cover seat brown A III series 40,00

ELECTRICITY-SWITCHE 3 2A109 Headlamp chrome ring A 22,00E 4 2A112 Headlamp fixing spring kit A 4,00

E 5 2A149 Headlamp glass gasket A 4,00E 7 2A110 Headlamp glass A 18,00E 8 2A111 Headlamp reflector with lampholder A 18,00E 13 2S1126 Rear light with lampholder A 50,00E 12 3A359 Horn A II-III series 45,00E 12/B 2A1181 Mechanic horn A I series 200,00E 9 2A1146 Light switch A I series 60,00E 9/B 2A1146 Light switch ivory A II-III series 60,00E 10 2A1131 Stop switch A II-III series 10,00E 300 � 2A117 Bulb 25/25W 6V A 2,00E 301 � 2S553 Torpedo bulb 5W 6V A 1,00

ELECTRICITY-LOOMSE 100 2A510 Protection cap L.T. socket A 3,00E 101 2A509 Protection cap H.T. cable A 3,00E 102 2A501 Protection cap spark plug A 3,00E 320 � 2M803 Spark plug A 3,00

ELECTRICITY-FLYWHEELE 126 2M1136 H.T. coil A 90,00E 127 2M1141 Condenser A 8,00E 131 2M1156 Contact points A 12,00E 135 2M1116 H.T. socket A 15,00E 136 2M1106 L.T. socket A 12,00E 128 2M801 Flywheel round cover A 25,00

HANDLEBARL 1 2ST401/301 Pair handlebar levers supports A 100,00L 2 2ST409 Screw handlebar lever A 2,00L 3 2ST410 Brake/clutch lever A 20,00L 4 Handlebar complete A 380,00

GRIPSL 42 2ST413 Pair grips grey A 20,00L 43 2ST413 Pair grips green A 20,00L 44 2ST413 Pair grips ivory A 20,00

CABLE-VARIOUSL 63 Inner and outer cable kit A 35,00L 64 2T707 Outer stop (ferrule) A 2,00L 65 2ST814 Front brake adjuster A 6,00L 66 2ST815 Front brake cable clamp A 4,00L 67 2T708 Rear brake adjuster A 3,00L 68 2T712 Attachment rear brake lever A 5,00

CARBURETTORB 3/B Carburettor gasket kit A 3,00B 5 2M1211 Air filter A 25,00B 8 2S1056 Fuel tap A 70,00B 9 2S1041 Fuel pipe A 30,00

Want to know all the Lambretta variations and changes? buy the new Book: Lambretta illustrated guide of the identification.

3.50 x 7 tyre with original 3 notch pattern tyre homologated foruse on roads (T 169).

CasaLambretta NEW EXCLUSIVE

T 169


16

Lambretta 125 B125 B produced from December 1948 toJanuary 1950 in 35.014 exemplars.Starting from frame number: 00.001

Identification particulars 125 BFirst version up to frame number 20.000Heel brake pedal, throttle control clutch internalto case, light switch on the headlight (the last2.000 of the first version have switch on thehandlebar), cylindrical rubber plugs arebetween fuel tank and luggage box.

Second version up to frame number 40.000Point brake pedal, throttle control clutch externto case, light switch on the handlebar (the first5.000, on the second version, have the weightpush button on the frame), fuel tank andluggage box buffers are eliminated.

Third version up to end production:Internal lever of rear suspension is oversizedand fixed with screw, support buffers lidluggage box are eliminated.

Lechler coulors code system:Metallic-Blue 8024 • Metallic-Red 8023 •Metallic-Green 8025 • Metallic-Bronze 8053

Painting schemes:Valid for all version: all in the same Blue orRed or Green or Bronze coulors, except theseat frame and the seat supports, the wheelrims, the hubs, the centre stand, of the interiorside of the front suspension painted withaluminium coulor FIAT 690.

The crankcase, the carburettor body, the airfilter, the bronze cast connecting to luggagebox and flywheelhood are painted always inaluminium coulor FIAT 690.



ENGINEM 1 2M1026 Piston size 52 mm and more B 48,00M 24 2M1041 Rod complete kit B 72,00M 243 2 M 301 Conrod bush 14 mm B 6,00M 42 2M1051 Crankshaft complete B 200,00M 108 Engine oil seal kit B 18,00M 125 2F1016 Clutch plates (3 pieces) Surflex B 38,00M 125/B 2F1016 Kit Clutch plates Surfelx with springs B 48,00M 275 2F1001 Rod, cup and internal lever for clutch B II series 28,00M 154 2M411 Kick start return spring B 8,00M 160 2M435 Z 13 starter gear B 24,00M 164 Engine gasket kit B 26,00M 185 2T1311 Nickelizet silencer B 150,00M 186 ✩ 2T1026 Chrome manifold B 60,00M 202 ✩ 2M122 Gear bearing (6201) B 8,00M 203 ✩ 3TR340 Rear axe bearing (6202) B 9,00M 204 ✩ 2M316 Crankshaft bearing (6203) B 10,00M 210 ✩ 2F165 Clutch bearing (98205) B 75,00M 220 2M303 Needle bearing kit for rod B 5,00

M 221 2C109 Needle bearing kit for gear B 5,00M 223 2F116 Bearing kit for clutch-steering B 1,50M 135 3F132 External spring clutch lever B II series 5,00

FRONT SUSPENSIONT 2 2ST133 Pin internal upper B 20,00T 3 2ST129 Pin external upper B 20,00T 4 3ST124 Pin internal lower (normal size) B 20,00T 5 3ST124 Pin internal lower (size + 0,5 mm) B 20,00T 7 3ST116 Pin external lower B 20,00T 8 3ST166 Special bush for T 7 B 40,00T 9 3ST183 Spring B 12,00T 10 3ST152 Buffer B 6,00T 11 Cone kit for fork B 60,00T 12 3ST170 Right fork cover B 30,00T 13 3ST169 Left fork cover B 30,00

REAR SUSPENSIONT 70 3TR503 Little spring for internal lever B 4,00T 71 3TR502 Main spring B 12,00

Lambretta 125 B 1948 first version.

Maintenance datas:Mixture 5% spark plug 225 Bosch short screwMotor oil sae 15/50 180 gr. Final fett transmissionCarburettor MA 16 mainjet 65 pilotjet 45 valve 55Ignition advance 26° 33 mm on the flywheel circumference

It’s better to send orders with “Casa Lambretta” codes via fax.

Lambretta 125 B 1949 second version.

LAMBRETTA 125 B

17

T 72 Bush kit external suspension B I series 14,00T 73 Bush kit external suspension B II-III series 14,00T 74 Bush kit external suspension B I-II series 20,00T 76 Bronze bush rear brake cam B III series 20,00T 76/B Rear brake cam bushing bronze B 25,00

WHEELST 115 2R1016 Front brake lever B 10,00T 116 2R136 Spring for front brake lever B 5,00M 202 ✩ 2M122 Front hub bearing (6201) B 8,00T 120/B 2R137 Front hub oil seal B 3,00T 121 2R138 Front hub brake lining B 10,00T 122 3R806 Rear hub brake lining B 12,00T 124 3R1056 Wheel B 40,00T 171 3R503 Tyre 3.50 x 8 Sava white wall B 45,00T 172 ✩ 3R503 Tyre 3.50 x 8 Michelin S 83 B 38,00T 173 3R504 Tube 3.50 x 8 Michelin B 15,00

STANDST 203 3T514 Stand B 90,00T 202 2M127 Stand pin with special nut B 10,00T 201 2T510 Stand spring B 6,00

BODY PLASTIC/RUBBERC 80 2T142 Floor rubber kit grey (6 pieces) B 10,00C 8 3S121 Petrol rubber kit (4 pieces) grey B 8,00C 9 2S102 Filler cap round gasket B 1,00C 9/B 2S1136 Filler cap black B 10,00C 11 2S535 Luggage box round buffer B I-II series 1,00C 12 3S584 Tank round buffer B I series 4,00C 13 2S503 Luggage box gasket B 3,00C 14 3S531 Luggage box/engine spacer leather B 10,00C 15 3M436 Kick starter protection B 6,00C 16 3T714 Brake pedal protection B 3,00C 17 Horn ring rubber B 3,00C 18 3T109 Grommet front brake cable B 1,00C 19 3T106 Grommet clutch-gear cable B 1,00C 19/B 2S502 Luggage box cover grommet B 1,00C 20 2T145 Brake pedal round buffer B 1,00C 21 2T124 Pair passenger pedal rubber B 20,00

LOCKC 129 2S1116 Luggage box lock B 50,00

BADGEC 144 2S1101 “Lambretta” luggage box badge B 15,00C 145 2ST1061 “Innocenti” front fork badge B 30,00

BODY METALC 232 2T196 Floor channel chrome kit (6 pieces) B 72,00C 233 2T193 Floor channel end cap B 4,00C 234 2T147 Foot board pin support B 10,00C 236 2S573 Luggage box cover pin B 4,00C 237 2S573 Luggage box cover pin + 0,5 mm B 4,00C 239 2T703 Brake pedal bush B 3,00C 230 � 2S514 Luggage box cover B 60,00C 319 2A136 Headlight support between the handlebar B 50,00B 303 2T826 Chrome ring for fix the front seat support AIIIs.-B 10,00

SEATSC 324 Front seat cover B 40,00



Cannot find some items in the catalogue? To order them use the number of the figure and the table drawings on the original Innocenti catalogue.

C 325 Rear seat cover B 40,00C 326 Front seat cover (leather) B 60,00

ELECTRICITY-SWITCHE 3 2A19 Headlamp chrome ring B 22,00E 4 2A112 Headlamp fixing spring kit B 4,00E 5 2A149 Headlamp glass gasket B 4,00E 7 2A110 Headlamp glass B 18,00E 8 2A111 Headlamp reflector with lampholder B 18,00E 9/B 2A1146 Light switch ivory B I series 60,00E 10 2A1131 Stop switch B I series 10,00E 11 3A1176 Light switch B II - III series 50,00E 12 3A359 Horn B 38,00E 13 2S1126 Rear light with lampholder B 50,00E 300 � 2A117 Bulb 25/25W 6V B 2,00E 301 � 2S553 Torpedo bulb 5W 3V B 1,00

ELECTRICITY-LOOMSE 100 2A510 Protection cap L.T. socket B 3,00E 101 2A509 Protection cap H.T. cable B 3,00E 102 2A501 Protection cap spark plug B 3,00E 320 � 2M803 Spark plug B 3,00

ELECTRICITY-FLYWHEELE 126 2M1136 H.T. coil B 90,00E 127 2M1141 Condenser B 8,00E 131 2M1156 Contact points B 12,00E 128 2M801 Flywheel round cover B 25,00E 135 2M1111 H.T. socket B 15,00E 136 2M1106 L.T. socket B 12,00

HANDLEBARL 5 3ST307 Clutch lever B 20,00L 6 3ST410 Front brake lever B 20,00L 7 3ST306 Complete gear control B 320,00L 8 3ST145 Handlebar (2 pieces) B 140,00L 9 3ST1011 Complete gas control B on requestL 10 3ST409 Lever pin B 5,00

GRIPSL 45 3ST413 Pair grips B 20,00

CABLE-VARIOUSL 64 3ST705 Outer stop (ferrule) B 2,00L 65 2ST814 Front brake adjuster B 6,00L 66 2ST815 Front brake cable clamp B 4,00L 62 Inner and outer cable kit B I series 20,00L 62/B Inner and outer cable kit B II-III series 20,00L 67 2T708 Rear brake adjuster B 3,00L 68 3T712 Attachment rear brake cable B 5,00L 69 3C1011 Gear cable (Teleflex) B 68,00L 161 3C302 Gear box cover B 15,00

CARBURETTORB 3/B Carburettor gasket kit B 2,50B 5 2M1211 Air filter B 25,00B 8 2S1056 Fuel tap B I series 70,00B 9 3S1041 Fuel pipe B 30,00B 10 6S1056 Fuel tap B II-III series 25,00B 10/B Fuel tap gasket B II-III series 1,00


18

Lambretta 125 C-LC125 C produced from February 1950 toNovember 1951 in 87.500 exemplars.125 LC produced from April 1950 to November1951 in 42.500 exemplars.From frame number: 125C 50.001

125LC 400.001

Identification particulars 125 C-LC:First version year 1950:Receiving casing of gearbox cables in irregularquadrangular shape with the writing teleflex,lever on the handlebar Lambretta B types withinsertion hole.59 mm X 10 mm

Second version year 1951:Receiving casing of gearbox cables with shieldform and no writing on, lever on the handlebarwith insertion hole 44 mm X 10 mm.

Lechler colours code system:Kaki light Olive 8027 / Camoscio 8011 / Blue:not available (only for the very first version withone hook only at the rear luggage box).

Painting schemes:125 C: all in the same Green or Camoscio orBlue coulor, except the seat frames, the toolstube, the centre stand, the wheel rims, the hubsand the two bars under the foot-board arepainted aluminium coulor FIAT 690:

125 LC: all in the same Green, Camoscio orBlue, except the seat frames, the tools tube,the wheel rims, the hubs painted in aluminiumcoulor FIAT 690. The fuel tank and the rear mudguard are alwayspainted in Grau anti-rust matt coulor.The sheet-aluminium case that convoys air-blast cooling is only cleaned (neither polished,nor painted).Valid for both models: the crankcase and the airfilters are always painted in Aluminium colourFIAT 690.



ENGINEM 1 2M1026 Piston size 52 mm and more C-LC 48,00M 24 2M1041 Rod complete kit C-LC 72,00M 243 2 M 301 Conrod bush 14 mm C-LC 6,00M 42 2M1051 Crankshaft complete C-LC 200,00M 108 Engine oil seal kit C-LC 18,00M 125 2F1016 Clutch plates (3 pieces) Surflex C-LC 38,00

M 125/B 2F1016 Kit Clutch plates Surfelx with springs C-LC 48,00M 275 2F1001 Rod, cup and internal lever for clutch B II series 28,00M 154 2M411 Kick start return spring C-LC 8,00M 156 6M412 Kick starter shaft C-LC 28,00M 160 2M435 Z 13 starter gear C-LC 24,00M 281 � 5M1161 Kick start lever chrome LC 52,00M 164 Engine gasket kit C-LC 26,00M 187 6T1056 Silencer (black) C II series 100,00

Lambretta 125 C prior to version 1950.

Lambretta 125 LC 1950 first version.

Maintenance datas:

Mixture 5% spark plug 225 Bosch short screwMotor oil sae 15/50 180 gr. final transmission greaseCarburettor MA 16 mainjet 65 pilotjet 45 valve 55Carburettor Zenith mainjet 80/84 pilotjet 40Ignition advance 26° / 28° 33/35 mm on the flywheel circumference

All goods are made in Italy, when are not look the symbol: star made in Europe, sun made in Asia

Gearbox first series. Gearbox second series.

LAMBRETTA 125 C-LC

19



M 187/B 6T1056 Silencer (nickelizet) C I series 120,00M 188 5T1091 Silencer LC 100,00M 202 ✩ 2M122 Gear bearing (6201) C-LC 8,00M 203 ✩ 3TR340 Rear axe bearing (6202) C-LC 9,00M 204 ✩ 2M316 Crankshaft bearing (6203) C-LC 10,00M 210 ✩ 2F165 Clutch bearing (98205) C-LC 75,00M 220 2M303 Needle bearing kit for rod C-LC 5,00M 221 2C109 Needle bearing kit for gear C-LC 5,00M 223 2F116 Ball bearing kit for clutch C-LC 1,50M 135 3F132 External spring clutch lever C-LC 5,00M 246 6TR1006/316 Kit conical gear transmission C-LC 200,00

FRONT SUSPENSIONT 15 6ST1061 Main spring bush C-LC 8,00T 16 6ST121 Pair protection cap C-LC 6,00T 17 6ST112 Main spring (internal) C-LC 10,00T 18 6ST113 Little spring (external) C-LC 8,00T 19 6ST119 Pin for link lever C-LC 8,00T 20 6ST120 Pin for rod spring C-LC 6,00T 21 6ST120 Pin for rod spring (+0,2 mm) C-LC 6,00T 22 6ST1051 Rod for spring C-LC 22,00T 23 Cone kit for fork C-LC 40,00T 24 6ST118 Link lever bush C-LC 6,00M 222 6ST217 Bearing kit upper C-LC 2,00M 224 6ST108 Bearing kit lower C-LC 3,00

REAR SUSPENSIONT 77 6TR515 Round buffer C-LC 8,00T 78 6TR512 Main spring C-LC 14,00T 79 6TR513 Little spring C-LC 8,00T 80 6TR503 Front pin shock adsorber C-LC 8,00T 82 6TR503 Front pin shock adsorber (+0,5 mm) C-LC 8,00T 83 6TR346 Rear pin shock adsorber C-LC 16,00T 84 6TR502 Front pin bush C-LC 6,00T 85 6TR510 Rear pin bush C-LC 6,00

WHEELST 115 2R1016 Front brake lever C-LC 10,00T 116 2R136 Spring for front brake lever C-LC 5,00M 202 2M122 Front hub bearing (6201) C-LC 8,00T 120/B 2R137 Front hub oil seal C-LC 3,00T 124 3R1056 Wheel C-LC 40,00T 129 6R1021 Front brake shoes C-LC 25,00T 130 6R1031 Rear brake shoes C-LC 25,00T 250 6R103 Front brake return spring All 5,00T 252 6R1031 Rear brake return spring All 5,00T 173 3R502 Tube 4.00 x 8 Michelin C-LC 15,00T 174 6R501 Tyre Sava 4.00 x 8 C-LC 35,00T 176 ✩ 6R501 Tyre Sava white wall 4.00 x 8 C-LC 55,00

STANDST 201 3T510 Spring C-LC 6,00T 202 2M127 Stand pin with special nut C-LC 10,00T 204 6T501 Stand C 80,00T 205 5T501 Stand LC 90,00

BODY PLASTIC/RUBBERC 9 2S102 Filler cap round gasket C-LC 1,00C 9/B 2S1136 Filler cap black C-LC 10,00C 25 05170116 Gasket tank pipe in cork LC 3,00C 35 2S115 Filler cap collar grey LC 6,00C 15 3M436 Kick starter protection C-LC 6,00C 16 3T714 Brake pedal protection C-LC 3,00

C 18 3T109 Grommet front brake cable LC 1,00C 22 6S106 Antivibration rubber for fuel tank C-LC 4,00C 23 6T146 Floor channel grommet C-LC 0,50C 24 6T148 Antivibration rubber for legshield C 2,00C 26 6A905 Antivibration rubber for toolbox (4 pc.) C 4,00C 27 6A406 Pair rubber passenger footrest C 8,00C 28 6A805 Gasket for spare wheel support C 2,00C 29 5T170 Pair horncasting beading LC 4,00C 30 5T222 Pair panel beading LC 6,00C 31 5T220 Pair passenger footboard mats LC 25,00C 32 5T235 Protection for panel lock spring LC 2,00C 33 5T240 Pair little buffer for carburettor door LC 4,00C 4 6T113 Red gasket engine-frame C-LC 4,00

BADGEC 146 6S120 Pair “Lambretta” transfer C 6,00C 147 6T149 Round emblem “Innocenti” transfer C 4,00C 147/B 6T149 Round emblem “Innocenti” alloy C 8,00C 148 2ST1061 Front badge “Innocenti” LC 12,00C 149 5T169 Front alloy badge “Lambretta” LC 8,00

BODY METALC 243 6T140 Front emblem support C 10,00C 245 6T133 Floor channel kit (4 pieces) C 46,00C 246 6T117 Legshield pin support C 10,00C 248 6T1052 Toolbox under front seat (complete) C-LC 56,00C 249 6T135 Toolbox round cover C-LC 15,00C 439 6A903/2 Toolbox lid C 40,00C 466 � Rear toolbox (without lid) C 90,00C 250 6A904 Rear toolbox clamp C 8,00C 253 5T165 Floor channel kit (6 pieces) LC 72,00C 254 5T237 Panel chrome ring kit (4 pieces) LC 35,00C 255/B 5T202 Panel handle left LC 8,00C 256/B 5T201 Panel handle right LC 8,00C 257 5T228 Spring for right panel door LC 8,00C 258 5T207 Spring for panel lock LC 4,00C 247 6T703 Brake pedal return spring C-LC 5,00C 239 2T703 Brake pedal bush C-LC 2,00C 267 5I300/301 Pair panel lock mechanism LC 40,00C 252 05180242 Spring for fix the panel lock rubber LC 3,00C 457 � 5T1041 Righthand rear footboard LC 60,00C 456 � 5T1046 Lefthand rear footboard LC 60,00

SEATSC 327 Front-rear seat cover (1 piece) C-LC 40,00C 328 Rear seat cover rectangular C-LC 40,00C 281 Front seat spring chrome C-LC 38,00C 295/A Rear seat spring chrome C-LC 15,00

ELECTRICITY-SWITCHE 3 2A109 Headlamp chrome ring C 22,00E 4 2A112 Headlamp fixing spring kit C 4,00E 5 2A149 Headlamp glass gasket C-LC 4,00E 7 2A110 Headlamp glass C-LC 18,00E 8 2A111 Headlamp reflector with lampholder C-LC 18,00E 14 6A1176 Light switch C-LC 40,00E 15 6A301 Horn C-LC 36,00E 16 6A305 Horn support C 4,00E 17 6A1166 Horn support clamp C 12,00E 18 5A1016 Headlamp chrome ring LC 30,00E 19 5A104 Headlamp fixing spring kit LC 4,00E 20 6A1067 Rear light with lampholder C-LC 40,00E 300 � 2A117 Bulb 25/25W 6V C-LC 2,00

Since 1979 the “Casa Lambretta” is the first professional center Lambretta in Italy.

20





E 301 � 6A601 Torpedo bulb 5W 6V C-LC 1,00

ELECTRICITY-LOOMSE 100 2A510 Protection cap L.T. socket C-LC 3,00E 101 2A509 Protection cap H.T. cable C-LC 3,00E 102 2A501 Protection cap spark plug C-LC 3,00E 104 Wiring loom C-LC 20,00E 108 6A307 Protection cap for horn C-LC 3,00E 99/B Stop switch C-LC 10,00E 320 � 2M803 Spark plug C-LC 3,00

ELECTRICITY-FLYWHEELE 126 2M1136 Coil H.T. (model with 3 coil) C-LC early model 90,00E 129 � C10740 H.T. coil Filso C-LC 60,00E 131 C10420 Contact points FIlso C-LC 15,00E 251 � 573/I-16 Condenser Filso C-LC 8,00E 132 � MVA21/25 H.T. coil Marelli C-LC 60,00E 133 MVA11/15A Condenser Marelli C-LC 8,00E 134 � MVA11/40A Contact points Marelli C-LC 15,00E 135 MVA21/60A H.T. socket C-LC 15,00E 136 MVA21/70A L.T. socket C-LC 12,00E 130 6M801 Flywheel round cover C 25,00E 451 5110506 Flywhell cover alloy LC 40,00

HANDLEBARL 5 6ST307 Brake/clutch lever (1 piece) C-LC I series 20,00L 10 3ST409 Lever pin C-LC 5,00L 11 3ST312 Brake/clutch lever (1 piece) C-LC II series 20,00L 16 6ST306 Alloy round cap for hadlebar grip C-LC 8,00L 18 6ST319 Pin for handgrip alloy bung C-LC 2,00L 17 6ST320 Grub for sleeve C-LC II series 1,00L 13/B 7ST301-302 Axe and needle gas/gear control kit C-LC II series 6,00

Problems with the tail worn?

A new service from Casa Lambretta:

complete overhaul of the tail with the

replacement of the bushes, the bushing

and bevel.For information on this service please

contact our distributor in Naples:

Mr. Scafuto Tel. 081 287521

M 246

LC Left and Right passenger platform. C- LC second version completeaccelerator handle.

LC Fly-wheel aluminium cover.


C 457 L 166 E 451

L 13/C 7ST301-302 Axe and needle gas/gear + 0,2 mm C-LC II series 6,00L 14 6ST303 Bronze slide for gear (to the handlebar) C-LC I series 16,00L 14/B 7ST303 Bronze slide for gear (to the handlebar) C-LC II series 18,00L 12 6ST305 Little slide external for gear (to the handlebar) C-LC II series 8,00L 166 6ST406-317 Kit complete trottle mechanism C-LC II series 60,00B 305 6180712 Special spring to fix the brake rod C-LC 1,50

GRIPSL 46 6ST410 Pair grips C-LC 8,00

CABLE-VARIOUSL 64 3ST705 Outer stop (ferrule) C-LC 2,00L 65 2ST814 Front brake adjuster C-LC 6,00L 66 2ST815 Front brake cable clamp C-LC 4,00L 70 Outer stop (ferrule) for gas cable C-LC 2,00L 72 Inner and outer cable kit C-LC 18,00L 73 6ST214 Handlebar grommet for Teleflex C-LC 2,00L 74 6C322 Gear cable Teleflex C-LC I series 60,00L 79 6C331 Gear cable Teleflex C-LC II series 45,00L 161 6C302 Gear box cover C-LC I s. 15,00L 162 6C326 Gear box cover C-LC II s. 12,00L 102 6T142 Steering cable clamp C 10,00L 105 6T147 Band, retaining cables C-LC 1,00B 305 6180712 Special spring to fix the brake rod C-LC 1,50

CARBURETTORB 3/B Rebuilt carburettor C-LC 2,50B 5 1682 Air filter C 25,00B 7 1687 Air filter LC 25,00B 10 6S1056 Fuel tap C-LC 25,00B 10/B Fuel tap gasket C-LC 1,00B 11 6S1006 Fuel pipe C-LC 25,00

21

Lambretta 125 D-LD125 D produced from December 1951 toNovember 1956 in 123.141 exemplars.125 LD produced from December 1951 toOctober 1955 in 110.334 exemplars.Begin frame number: 00.001

Identification particulars 125 D-LD:First version year 1951-52Chrome-plated iron handlebar with aluminiumplugs on the extremity, rear stick break drives(since middle ’52 modified to cable and biggerpedal cover), conical tools tube under the seatwith close joint plugs (since middle ’52modified to cylindric form to close with spring),brown colours for seat covers.Only for LD: lateral engine cover with two holesfor air exit.

Second version 1953Orientable aluminium handlebar with plasticlevers, bigger rear brake pedal, rear cable breakdrive, cylindrical tools tube with spring lock,brown seats.Only for LD: plastic legshield emblem on the leftside of the legshield, side engine covers withonly one oval hole for exit air (the firstest ’53have the engine covers with two holes).

Third version 1954-1955Brake-adjuster on the handlebar for the frontbrake drive and clutch, dark-green seats,keylock on the rear luggage box (only D).Only for LD: larger seat frames with green coverclosed on the front (the tools tube is movedinside the engine covers), grey rubber tubes toprotection to handlebar cables. The last production ’55 sees the handlebar inchrome-plated metal (always orientable).

Lechler coulors code system:Olive Green 8021 • light Camoscio 8055 • SandBeige 8029

Painting schemes:125 D: all in the same Green or Camoscio orBeige colour, except the seats frames, thewheel rims, the hubs, the torsion lever shaft,foot-board iron rods, the number plate holder,the bracket number plate holder, the centrestand painted in aluminium coulor FIAT 690.The crankcase and air filter are always paintedin aluminium coulor FIAT 690.

125 LD: all in the same Green, Camoscio orBeige coulor, except the seat frames, the wheelrims, the hubs, the torsion lever shaft, thenumber plate holder, the centre stand paintedwith aluminium coulor FIAT 690.Up to 1953 the LD is available only Sand Beige8029.The fuel tank and rear mudguard are anti-rustmatt grey coulor.The crankcase and the air filter are alwayspainted with aluminium coulor FIAT 690.The sheet aluminium crankcases convoying theair-blast cooling are only cleaned (neitherpolished, nor painted).

Lambretta 125 LD 1953 second version.

Lambretta 125 D 1952.

Maintenance elements:

Fuel mixture 5% short thread plug 225 Bosch scaleEngine oil sae 15/50 400 gr. gear/transmission oil 140 100 gr.Carburettor MA18B2 jet max 75 jet min. 40 valve 50Carburettor MA18B3 jet max 70 jet min. 45 valve 75Carburettor Zenith 18 jet max 102AIgnition timing-Marelli 34-36,5 mm on flywheel circumferenceIgnition timing Filso 32-34 mm on flywheel circumference

“Casa Lambretta” is quality:

Complete kit odometer € 200

Everything you need to mount the

speedometer on your Lambretta:

instrument, reference, cable clamps

For accessories, hardware, gadgets and extractors see the last pages.

A 175

LAMBRETTA 125 D-LD

22



ENGINEM 1 99091207 Piston size 52 mm and more D-LD 48,00M 24/B 2111041 Rod complete kit D-LD 72,00M 243 99091205 Conrod bush 14 mm D-LD 6,00M 43 7111051 Crankshaft complete D-LD 200,00M 89 99091102 Cylinder head D-LD 50,00M 109 Engine oil seal kit D-LD 20,00M 125 3F1046 Clutch plates (3 pieces) Surflex D-LD 38,00M 125/B 3F1046 Kit Clutch plates Surfelx with springs D-LD 48,00M 270 7060114 Kit rod and cup for clutch control All 28,00M 132 7110404 Kick start stop buffer D-LD 4,00M 153 7M404 Kick start gear range D-LD 60,00M 154 2M411 Kick start return spring D-LD 8,00M 247 7110415 K/start spring support All 20,00M 156/B 7110412 Kick starter shaft D-LD 28,00M 160 2110435 Z 13 starter gear D-LD 24,00M 281 � 8111046 Kick start lever chrome LD 52,00M 284 � 07111046 Kick start lever chrome D 50,00M 165 Engine gasket kit D-LD 25,00M 189 7181136 Silencer D-LD 120,00M 189/L 8180400 Silencer LD 120,00M 202 ✩ 99094029 Gear bearing (6201) D-LD 8,00M 204 ✩ 99091212 Crankshaft bearing (6203) D-LD 10,00M 206 ✩ 7330207 Rear bevel couple bearing (16004) D-LD 16,00M 211 ✩ 7060165 Clutch bearing (6205) D-LD 16,00M 220 99002905 Needle bearing kit for rod D-LD 5,00M 221 99002906 Needle bearing kit for gear D-LD 5,00M 223 99002904 Ball bearing kit for clutch D-LD 1,50M 135 3F132 External spring clutch lever D-LD 5,00M 272 7330103 “Round cover for transmission “Innocenti” All 12,00

FRONT SUSPENSIONT 25 99106052 Pair end buffer D-LD 4,00T 26 99106066 Pair round gasket for link D-LD 2,00T 27 99106051 Spring D-LD 10,00T 255 99106063 Spring rod for fork All from mid ’52 8,00T 28 99106062 Link lever right D-LD II-III series 80,00T 30 99106065 Pair fork bush D-LD 10,00T 31 99106064 Pair cover fork bush D-LD II-III series 8,00T 32 99106053 Pair cover fork gasket D-LD 4,00T 33 99106056 Trailing link right D-LD 25,00T 34 99106057 Trailing link left D-LD 25,00T 35 Cone kit for fork D-LD 40,00T 44 99096108 Lower steering ball race cover D 12,00M 224 99002901 Ball bearing lower kit D-LD 3,00M 222 99002903 Ball bearing upper kit D-LD 2,00

REAR SUSPENSIONT 86 7180616 Frame stop buffer D-LD 3,00T 87 7111016 Engine stop buffer D-LD 4,00T 88 7180608 Torsion bar ring protection D-LD 3,00T 89 7180609 Pair protection cap torsion bar D-LD 6,00T 90 7180604 Torsion bar D-LD 50,00T 90/B 7180160 Torsion bar support lever bush D-LD 30,00T 91 7181086 Torsion bar lever link bush D-LD 5,00T 92 7180613 Lever link pin longer D-LD 10,00T 93 7180612 Lever link pin short D-LD 8,00T 94 7180615 Lever link pin washer D-LD 3,00T 104 7180619 Special thick washer for torsion bar lever (on the engine) All 4,00T 91/B 7180611 Torsion bar short rod All 20,00T 94/B 15010020 Engine silent block D-LD II-III series 20,00

WHEELST 115 99094460 Front brake lever D-LD 10,00M 202 ✩ 99094029 Front hub bearing (6201) D-LD 8,00T 120/B 2160137 Front hub oil seal D-LD 3,00T 124 3160808 Wheel D-LD 40,00T 129 6161026 Front brake shoes D-LD I series 25,00T 130 99094530 Rear brake shoes D-LD 25,00T 131 99094450 Front brake shoes D-LD II-III series 25,00T 250 6R103 Front brake return spring D-LD I series 5,00T 251 7160103 Front brake return spring D-LD II-III series 5,00T 252 99094507 Rear brake return spring All 5,00T 173 99094426 Tube 4.00 x 8 Michelin D-LD 15,00T 174 99094425 Tyre 4.00 x 8 Sava D-LD 35,00T 176 ✩ 99094425 Tyre 4.00 x 8 Sava white wall D-LD 55,00

STANDST 201 3180510 Spring D-LD 6,00T 206 7180501 Stand D 70,00T 207 8180501 Stand LD 80,00T 208 7180502 Stand pin kit D-LD 10,00T 208/B 7180502 Stand pin kit + 1 mm D-LD 10,00T 209 7180504 Stand buffer D-LD 1,50

BODY PLASTIC/RUBBERC 9 99097007 Filler cap round gasket D-LD 1,00C 25 05170116 Gasket tank pipe in cork LD 3,00C 9/B 99097040 Filler cap black D-LD I series 10,00C 9/C 99097040 Filler cap white D-LD II-III series 10,00C 35 5170115 Filler cap collar grey LD 6,00C 16 3T714 Brake pedal protection D-LD I series 3,00C 40 99095906 Brake pedal protection D-LD II-III series 3,00C 18 3180109 Grommet front brake cable LD 1,00C 22 99097008 Antivibration rubber for fuel tank D-LD 4,00C 23 5180147 Floor channel grommet D 0,50C 24 6180148 Antivibration rubber for legshield D 2,00C 26 99098626 Antivibration rubber for toolbox (4 pc.) D 4,00C 27 6A406 Pair rubber passenger footrest D 8,00C 28 6A805 Gasket for spare wheel support D 2,00C 29 5180170 Pair horncasting beadingh white LD 4,00C 29/B 5180170 Pair horncasting beading grey LD III series 4,00C 30 8180222 Pair panel beading black LD I-II series 6,00C 65 8180222 Pair panel beading grey LD III series 6,00C 31 8181241 Pair passenger footboards mats LD 25,00C 32 5180235 Protection for panel lock spring LD 2,00C 33 5180240 Pair little buffer for carburettor door LD 4,00C 36 7180302 Mudguard antivibration buffer D 2,00C 39 7110437 Kick starter protection D-LD 5,00C 42 7180152 Legdhield grommet for Teleflex D 1,00C 47 8180140 Floor channel rubber beading (6 pc.) LD 12,00C 269 8180246 Pair plastic panel grill LD II-III series 20,00

LOCKC 130 99108810 Steering lock D-LD 40,00C 131 99098670 Rear tool box complete lock D II-III series 40,00

BADGEC 146 99097012 Pair “Lambretta” transfer D 6,00C 148 2771061 Front badge “Innocenti” LD I series- D 12,00C 149 2771061 Front alloy badge “Lambretta” LD I series 8,00C 150 8181121 Shield plastic emblem “LD” LD II-III series 40,00

Want to know about the history of the Lambretta? Buy the book “Innocenti Lambretta” of 296 pages written by Vittorio Tessera.


LAMBRETTA 125 D-LD

23



BODY METALC 239 99095903 Brake pedal bush D-LD 3,00C 248 6T1052 Toolbox under front seat (complete) D-LD I series 56,00C 249 6180135 Toolbox round cover D-LD I series 15,00C 267 0809333/4 Pair panel lock mechanism LD 50,00C 274 7181057 Toolbox under front seat (complete) D-LD II-III series 56,00C 275 6180135 Toolbox round cover D-LD II-III series 12,00C 276 7180156 Spring retaining toolbox cover D-LD II-III series 4,00C 250 99098625 Rear toolbox clamp D 8,00C 254/B 5180236 Panel chrome ring kit (4 pieces) LD I series 35,00C 255/B 5180202 Panel handle left LD 8,00C 256/B 5180201 Panel handle right LD 8,00C 257 5180228 Spring for panel right door LD 8,00C 258 5180207 Spring for panel lock LD 4,00C 247 99095904 Brake pedal return spring D-LD 5,00C 252 05180242 Spring for fix the panel lock rubber LD 3,00C 259 7181121 Front emblem support D 18,00C 260 7180150 Floor channel kit (4 pieces) D 48,00C 262 7180117 Legshield pin support D 10,00C 263 7011221 Support for number plate D 12,00C 264 7010603 Spacer for support number plate D 5,00C 265 7011071 Number plate D-LD 20,00C 261 08010603 External spacer for number plate LD 5,00C 261/B 08010604 Internal spacer for number plate LD 5,00C 273 8T183-179 Kit floor channel chrome with screws LD until mid ’54 65,00C 266 ✩ 8180144 Floor channel kit (6 pieces) LD 28,00C 233 8180142 Floor channel end cap LD 4,00C 457 � 8181041 Righthand rear footboard LD 60,00C 456 � 8181046 Lefthand rear footboard LD 60,00C 460 � 8771046 Front mudguard LD 90,00C 465 � 7180130 Legshield D 220,00C 468 � 6171001 Tank D- adapt LD 110,00C 463 � 99106050 Front mudguard D 90,00C 464 � 7181021 Rear mudguard D 120,00C 277 6110903 Rear toolbox cover D I series 35,00C 467 � 99098630 Rear toolbox (without lid) D 90,00C 278 99098690 Fastener for locking rear toolbox D 20,00C 233/K 8180144 Kit 12 pcs. floor channel end caps + screws LD 52,00C 277/B 99098640 Rear toolbox cover (for lock) D II-III series 40,00

SEATSC 327 Front-rear seat cover brown (1 piece) D-LD I-II series 40,00C 328 Rear cover seat rectangular brown D-LD I series 40,00C 329 Front-rear cover green (1 piece) D-LD III series 40,00C 335 Front seat cover green (front closed) LD last III Series 45,00C 336 Rear seat cover green (front closed) LD last III Series 45,00C 281 Front seat chrome spring conical D-LD 38,00C 282 Front seat chrome spring biconical LD III series 38,00C 295 Rear seat chrome spring D-LD 15,00C 37 81811226 Rubber brown for passenger handle D-LD II series 5,00C 38 8181226 Rubber green for passenger handle D-LD III series 5,00C 271 8181226 Metal passenger handle D-LD 16,00C 391 7181031 Rear frame seat (without cover) D 125,00

ELECTRICITY-SWITCHE 3 99098002 Headlamp chrome ring D 22,00E 4 99098009 Headlamp fixing spring kit D 4,00E 18 8011406 Headlamp chrome ring LD 30,00E 19 5010131 Headlamp fixing spring kit LD 4,00E 5 99098006 Headlamp glass gasket D-LD 4,00E 7 99098007 Headlamp glass D-LD 18,00E 8 6010121 Headlamp reflector with lampholder D-LD 18,00

E 14 7011161 Light switch black and chrome D-LD I series 40,00E 21 70141161 Light switch all white D-LD II series 40,00E 24 11011186 Light switch white with chrome cover D-LD III series 40,00E 15 6011165 Horn D-LD ’52-1a half ’53 36,00E 22 6011165 Horn D-LD 2a half ’53-’54 36,00E 16 6A305 Horn support D 4,00E 17 6011166 Horn support clamp D 12,00E 20 7010607 Rear light with bulbholder D-LD 40,00E 300 � 2010117 Bulb 25/25W 6V D-LD 2,00E 301 � 6110601 Torpedo bulb 5W 6V D-LD 1,00E 312 � 7010146 Torpedo bulb 10W x 12V (stop) D-LD 1,00E 400 8111236 Battery 6 volt LD electric starter 100,00

ELECTRICITY-LOOMSE 100 2A510 Protection cap L.T. socket D-LD I series 3,00E 106 99098221 Protection cap L.T. socket D-LD II-III series 3,00E 101 2010509 Protection cap H.T. socket D-LD 3,00E 102 99098204 Protection cap spark plug D-LD 3,00E 104 Electrical loom D-LD 20,00E 108 99098102 Protection cap for horn D 3,00E 99/B Stop switch D-LD 10,00E 320 � 7110807 Spark plug D-LD 3,00

ELETRICITY-FLYWHEELE 251 � 811282 Condenser Filso D-LD 8,00E 129 � 811207 H.T. coil Filso D-LD 60,00E 131 811251 Contact points Filso D-LD 15,00E 130 6110801 Flywheel round cover D 25,00E 451 5110506 Flywhell cover alloy LD 40,00E 132 � 831411 H.T. coil Marelli D-LD 60,00E 133 � 831401 Condenser Marelli D-LD 8,00E 134 � 831404 Contact points Marelli D-LD 15,00E 135 831414 H.T. socket D-LD 15,00E 136 99091750 L.T. socket D-LD 12,00

HANDLEBARL 10 99096209 Lever pin D-LD I series 5,00L 20 7770418 Lever pin D-LD II-III series 5,00L 15 7770312 Clutch/brake alloy lever (1 piece) D-LD I series 20,00L 19 99096220 Pair plastic lever (2 pieces) D-LD II-III series 20,00L 16 6770318 Alloy round grip terminal D-LD I series 6,00L 18 6770319 Pin for handgrip alloy bung D-LD ’51-’52 2,00L 17 6770320 Grub for sleeve D-LD 1,00L 200 7770222 Alloy handlebar D-LD II-III series 65,00L 13/B 7770301/2 Axe and needle gas/gear control kit D-LD I series 6,00L 13/C 7770301/2 Axe and needle gas/gear + 0,2 mm D-LD I series 6,00L 16/B 7770326/4 Axe and needle gas/gear control kit D-LD II series 6,00L 16/C 7770326/4 Axe and needle gas/gear + 0,2 mm D-LD II series 6,00L 16/D 7770330/2 Axe and needle gas/gear control kit D-LD III series 6,00L 16/E 7770330/2 Axe and needle gas/gear + 0,2 mm D-LD III series 6,00L 14/B 7ST303 Bronze slide for gear (to the handlebar) D-L ’52-’53 18,00L 166 6ST406-317 Kit complete throttle mechanism (steel handlebar) D-LD ’51-’52 60,00L 167 7ST414-322 Kit complete throttle mechanism (alloy handlebar) D-LD ’53-’55 50,00

GRIPSL 46 6770410 Pair grips D-LD I series 8,00L 47 Pair grips D-LD II series 8,00L 49 7770403 Pair grips D-LD III series 8,00

CABLE-VARIOUSL 64 8770805 Outer stop (ferrule) D-LD 2,00L 65 2771117 Front brake adjuster D-LD 6,00L 66 2771111 Fron brake cable clamp D-LD 4,00




L 90 99095908 Pair plate to fix the rear brake cable D-LD II-III series 4,00L 34 7770322 Metal tube under the grips D-LD II-III series 10,00B 305 6180712 Special spring to fix the brake rod D-LD ‘51-’52 1,50

CARBURETTORB 5 412108 Air filter D 25,00B 6 412107 Rebuilt carburettor D-LD on requestB 6/B Carburettor gasket kit D-LD 4,00B 7 412034 Air filter LD 25,00B 10/B Fuel tap gasket D-LD 1,00B 12 99097110 Fuel tap D-LD 20,00B 21 412053 Cable carburettor protection D-LD 2,00

ODOMETER and various accessoriesA 22 Speedo drive to the rear wheel D-LD 80,00A 1 610021 Speedo cable to the toolbox speedometer D 12,00A 2 611007 Speedo cable to the handlebar speedometer D-LD 12,00A 24 11011146 Speedo round support for 125 D D 30,00

24 Want to know about the history of the Lambretta? Buy the book “Innocenti Lambretta” of 296 pages written by Vittorio Tessera.


Problems with the 125/ 150 D bodywork? Not from now with the new exclusive CasaLambretta products. Front and rear mudguard, tank,pannier and shield, all the parts you need for thecomplete restoration of your Lambretta.


D-LD complete accelerator handle. Chrome-plated floor channel kit.

C 463 C 464

C 465C 468C 467+C 277

L 167 C 273

L 73 6770214 Handlebar grommet for Teleflex D-LD I series 2,00L 78 Inner and outer cable kit D-LD I series 22,00L 79 7031066 Gear cabler Teleflex D-LD I series 45,00L 81 7031012 Gear cable Teleflex D-LD II-III series 45,00L 163 7030302 Gear box cover All 12,00L 83 Inner and outer cable kit D-LD 22,00L 82 99096124 Handlebar clutch/brake adjuster D-LD III series 5,00L 84 99095908 Rear brake cable clamp D-LD 4,00L 85 99095907 Pin for cable clamp D-LD 2,00L 86 7180151 Support for teleflex under legshield D 6,00L 86/B 8180151 Support for teleflex under legishield LD 8,00L 87 99095912 Rear brake adjuster D-LD 4,00L 88 7180727 Support for rear brake adjuster D-LD 4,00L 95 99096507 Front brake fixing cable D-LD III series 4,00L 102 6180142 Clip retaining cables D 10,00L 105 99098218 Band, retaining cables D-LD 1,00L 70 Outer stop (ferrule) for gas cable D-LD I series 2,00L 71 Outer stop (ferrule) for rear brake cable D-LD II-III series 2,50L 61 Outer cable stop top hat (for clutch cable) D-LD III s. 3,00

LAMBRETTA 150 D-LD ’54-’56 125 LD ’56 125-150 LD ’57

25It’s better to send orders with “Casa Lambretta” codes via fax.

Lambretta 150 D-LD ’54-’56 125 LD’56 125-150LD’57150 D produced from October 1954 untilDecember 1956 in 54.593 examples.150 LD produced from November 1954 untilJanuary 1957 in 109.344 examples.125 LD produced from January 1956 untilNovember 1956 in 21.281 examples.125 LD ’57 produced from December 1956 untilJuly 1958 in 44.665 examples.150 LD ’57 produced from January 1957 until July1958 in 113.853 examples.Frame number starting from:150 D n. 5001150 LD n. 105.001125 LD ’57 n. 300.001150 LD ’57 n. 200.001

Identification particulars 150 D-LD:First version from 1954 until mid 1956Adjustable aluminium handlebar, dis-mountableexhaust with extra chrome-plated silencer, gearinserts with three lugs, electrical system withoutbattery (from August ’55 with battery), rear airgrilles on sidepanels made from white plastic (LD).Second version from mid 1956 until mid 1956Chrome plated adjustable iron handlebar, exhaustwith two inspection holes and no extra silencer,gear inserts with five lugs, electrical system withbattery, rubber buffers for sidepanels (LD), chromeplated metal rear air grilles on sidepanels (LD),left-hand threaded rear hub nut locking system.

Lechler colour codes:Sand Beige 8029 • Light Grey 8012 (very fewmade of the 1956 version).

Colour schemes:150 D: all in Sand Beige or Light Grey colour,except for the tool tube painted in the AluminiumFIAT 690. Only on the first 8.000 scooters thenumber plate holder and bracket are painted inthe Aluminium colour. The crankcase and theair filter covers are always painted in the Aluminiumcolour.150 LD: all in Sand Beige or Light Grey colour.Only on the first 8.000 scooters the number plateholder is painted in the Aluminium colour. Thecrankcase is painted the Aluminium colour only onthe first examples. Afterwards the only paintedparts on the engine are the air filter cover, thegear cable box and the inlet manifold. Available forboth models: the rear shock absorber is paintedon the upper part in the same colour as thebodywork, whereas the lower part is nickel-plated.

Identification particulars: 125 LD ’56:Cable on the handlebars without rubber tubeprotection covers, seat frames are the 150 Dtype with Green open fronted covers, no rearshock absorber, foot-board strips in pressedaluminium (some examples were produced withaluminium floor runners with rubber inserts asper 150 LD models). From mid ’56 productionmodels were fitted with chrome-plated handlebarsinstead of the polished aluminium type and a

Lambretta 150 D 1957 latest version.

Lambretta 150 LD 1957 first version ’57.

“CasaScooter” is quality:LD Special Luxury Bag € 79

Packed in Italy, bora leather shoulderstrap with fabric and available in variouscolors. It ’best to send orders via fax withthe code “Casa Lambretta”

simplified exhaust without the supplementarychromed silencer.

Lechler colour codes:Sand Beige 8029

Colour schemes:All in the Sand Beige colour. The air filter coverand the box receiving the gear cable box arepainted the Aluminium colour FIAT 690.

HOME New Scooters

Identification particulars 125-150 LD’57:First version up to mid ’57Exhaust with two inspection plugs and shorttailpipe, front hub rim without dustguard lip,front seat frame with outside spring fittings, kickstarter with curved rubber cover.Only for the first 125 productions: seats framesas per 150 D with open fronted Green covers.

Second version from mid ’57 until end ofproduction:silencer without inspection plugs and with longtailpipe up to rear clutch lever, front hub withdustguard lip, front seat frame with inside springfixing (to avoid scratching of the side panelsduring removal), kick start lever with flat rubbercover.Only for the 125 models: unified seat frames asthe 150 with black covers.End production models:Domed nylok nuts fitted to both front and rearhubs as per LI models.

Lechler colour codes:Landa Grey 8041 • Light Blue - not availableAmaranto Red 8020 • Emerald Green 8051English Blue 8031

Colour schemes:125: All in Landa Grey.150: All in Landa Grey, except for the side panels,the horn casting and the handlebar cowl in either:Light Blue, Amaranto Red, Emerald Green,English Blue.The engine mounted gear cable box is paintedin Aluminium FIAT 690.

The shock absorber (only on the 150 model) ispainted on the upper part in the same colouras the bodywork and the lower part is nichel-plated.



ENGINEM 2 11111026 Piston 57 mm+oversizes (14 mm pin) 150 D-LD I series 54,00M 3 11111021 Piston 57 mm+oversizes (16 mm pin) 150 D-LD-LD'57 54,00M 4 11111306 Piston 52 mm+oversizes (16 mm pin) 125 LD der.-LD'57 48,00M 25/B Conrod complete kit (14 mm) 150 D-LD I series 72,00M 26 Conrod complete kit (16 mm) All less I series 72,00M 244 11110345 Conrod bush 16 mm All less I series 6,00M 45 11111191 Crankshaft complete (14 mm) 150 D-LD I series 200,00M 46 11111191 Crankshaft complete (16 mm) All less I series 200,00M 90 11110202 Cylinder head 150 D-LD-LD'57 50,00M 91 11110221 Cylinder head 125 DL der.-LD'57 50,00M 111 Engine oilseal kit 125 LD der.-150 D-LD 26,00M 111/B Engine oilseal kit 125-150 LD'57 28,00M 125 11061046 Clutch plates (3 pcs.) Surflex All 38,00M 125/B 11061046 Kit Clutch plates Surfelx with springs All 48,00

M 135 3060132 External spring clutch lever All 5,00M 270 7060114 Kit rod and cup for clutch control D-LD ’54-’56 28,00M 271 11060169 Kit rod and cup for clutch control LD '57 28,00M 132 7110404 Kick start stop buffer D-LD ’55 4,00M 153 7110404 Kick start gear range 150 D-LD ’55 60,00M 247 7110415 K/start spring support 150 D-LD I s. 20,00M 154 2110411 Kick start return spring D-LD ’54-’56 8,00M 154/B 12110431 Kick start return spring (inside) LD ’57 8,00M 154/C 12110445 Kick start return spring (outside) LD ’57 8,00M 156/B 7110412 Kick start shaft 125 LD (LD ’57 spec.) 125 LD der.-150 D-LD 28,00M 233 11110423 Kick start bronze bush 125-150 D-LD ’56 8,00M 160 2110435 Z 13 start gear 150 D-LD I series 24,00M 161 11110473 Z 13 start gear with collar 150 D-LD-125 LD der. 28,00M 162 11110492 Z 9 start gear 150 D-LD-125 LD der. 15,00M 281 � 12111091 Kick start lever chrome LD ’54-’56 52,00M 167 Engine gasket kit All 28,00

Lambretta 150 LD ’55. Lambretta 125 LD 1956 derived.

“Casa Lambretta” is quality:

LD rear sidepanel grilles.

Reflecting exactly the same aesthetic and

functional characteristics of the originals,

they are produced in both ivory coloured

plastic and chrome-plated versions.

Maintenance data:

Petroil Mixture 6% spark plug 225 Bosch short reachEngine oil SAE 15/50; 500 cc (540cc for the LD ’57 models) transmission oil SAE 140; 100cc.Carburettor MA 19B4 main jet 72 (150 LD ’57 mainjet 75) Pilot jet 40 Slide 75Carburettor MA 18B4 main jet 70 Pilotjet 40 Slide 75Ignition advance 24°/26° Deg. BTDC (4-4,6 mm BTDC)


26 All goods are made in Italy, when are not look the symbol: star made in Europe, sun made in Asia

C 269

C 270


27It’s better to send orders with “Casa Lambretta” codes via fax.



M 184 11184001 Silencer with 2 bronze caps D-LD ’56 140,00M 189 11180400 Silencer 150 D-LD I series 120,00M 189/L 12180400 Silencer (for round pipe chrome) 125-150 LD I series 120,00M 191 11181161 Exhaust round pipe, chrome 150 D-LD I series 90,00M 189/B 12184003 Silencer 125-150 LD'57 110,00M 204 ✩ 14010213 Rear axle bearing (6203) All 10,00M 206 ✩ 7330207 Rear bevel couple bearing (16004) All 16,00M 207 ✩ 11110326 Crankshaft bearing (3204) All 50,00M 211 ✩ 15012015 Clutch bearing (6205) All 16,00M 221 85003158 Needle bearings kit for gear All 5,00M 223 78920532 Ball bearings kit for clutch All 1,50M 272 7330103 “Round cover for transmission “Innocenti” All 12,00

FRONT SUSPENSIONT 25 99106052 Pair of end buffers All 4,00T 26 99106066 Pair of round gasket for links All 2,00T 27 99106051 Spring All 10,00T 255 99106063 Spring rod for fork All 8,00T 28 99106062 Link lever right All 80,00T 30 99106065 Pair of fork bushes All 10,00T 31 99106064 Pair of fork bush covers All 8,00T 32 99106053 Pair of fork cover gaskets All 4,00T 33 99106056 Fork link right All 25,00T 34 99106057 Fork link left All 25,00T 35 Cone kit for forks All 40,00T 35/B 15061060 Upper steering bearing All 3,00T 35/C 15060020 Lower steering bearing All 4,00T 44 99096108 Lower steering bearing cover All 12,00

REAR SUSPENSIONT 86 71800616 Frame buffer All 3,00T 87 7111016 Engine buffer All 4,00T 88 7180608 Torsion bar protection ring All 3,00T 89 7180609 Pair of torsion bar protection caps All 6,00T 90 7180604 Torsion bar All 50,00T 90/B 7180160 Torsion bar support lever bush All 30,00T 91 7181086 Torsion bar level link bush All 5,00T 92 7180613 Lever link pin longer type All 10,00T 93 7180612 Lever link pin short type All 8,00T 94 7180615 Lever link pin washer All 3,00T 104 7180619 Special thick washer for torsion bar lever (on the engine) All 4,00T 91/B 7180611 Torsion bar short rod All 20,00T 94/B 15010020 Engine silent block All 20,00T 100 11181151 Shock absorber 150 D-LD-LD’57 60,00

WHEELST 115 99094460 Front brake lever 150 D-LD-125 LD der. 10,00T 117 11161016 Front brake lever 125-150 LD'57 12,00M 202 ✩ 99094029 Front hub bearing (6201) All 8,00T 120/B 2160137 Front hub oil seal All 3,00T 124 3160808 Wheelrims All 40,00T 130 99094530 Rear brake shoes All 25,00T 131 99094450 Front brake shoes All 25,00T 251 7160103 Front brake return spring All 5,00T 252 99094507 Rear brake return spring All 5,00T 173 99094426 Tube 4.00 x 8 Michelin All 15,00T 174 99094425 Tyre 4.00 x 8 Sava All 35,00T 176 ✩ 99094425 Tyre 4.00 x 8 Sava whitewall All 55,00

STANDT 201 8108510 Spring All 6,00T 206 � 11180501 Stand 150 D 70,00T 207 � 12180506 Stand LD all 80,00

T 208 7180502 Stand pin kit All 10,00T 208/B 7180502 Stand pin kit + 1 mm oversize All 10,00T 209 7180504 Stand buffer All 1,50

BODYWORK PLASTICS & RUBBERSC 9 99097007 Filler cap round gasket All 1,00C 9/C 99097040 Filler cap white All 10,00C 18 3180109 Front brake cable grommet LD all 1,00C 22 99097008 Antivibration rubber for fuel tank 150 D 4,00C 23 5180147 Floor channel grommet 150 D 125 LD der-'57 0,50C 24 99095062 Antivibration rubber for legshield 150 D 2,00C 26 99098626 Antivibration rubber for toolbox (4 pcs.) 150 D 4,00C 27 6A406 Pair of passenger footrest rubbers 150 D 8,00C 28 6A805 Gasket for soare wheel support 150 D 2,00C 29/B 5180170 Pair of grey horncasting beadings LD all 4,00C 65 8180222 Pair of grey panel beadings LD all 6,00C 31 8181241 Pair of rear passenger footboard mats LD all 25,00C 32 15055046 Rubber protection for panel lock spring LD all 2,00C 36 15060039 Mudguard antivibration buffer 150 D 2,00C 40 99095906 Brake pedal rubber All 3,00C 39/B 11110437 Kick start rubber 150 D 5,00C 41 12110438 Kick start rubber 150 LD-125 LD der. 5,00C 61 12110436 Kick start rubber curved 125-150 LD'57 5,00C 62 12110426 Kick start rubber flat 125-150 LD'57 5,00C 42 7180152 Legshield grommet for 2 gear cables 150 D 1,00C 43 11010611 Upper gasket for number plate support 150 D 1,00C 44 11010610 Upper gasket for number plate support 150 D 1,00C 45 11010609 Lower gasket for number plate support 150 D 1,00C 46 12010606 Gasket for number plate LD all 1,00C 47 8180140 Floor channel rubber beading (6 pcs.) 150 LD-LD'57 12,00C 49 12180195 Rubber plug for legshield hole 125 LD der. 4,00C 49/B 8010913 Plastic plug for speedo hole 150 LD 12,00C 52 8010924 Rubber beading for front toolbox 150 LD 3,00C 53 Buffer for front toolbox door 150 LD 1,50C 54 12181061 Panel buffer with screw LD all 5,00C 55 2170105 Rubber washer for tank support LD all 1,50C 57 12180228 Rubber beading for rear toolbox door 125-150 LD'57 4,00C 60 12180154 Protection for seat spring bolt LD 1956 4,00C 269 8180246 Pair of plastic panel grilles 125-150 LD until mid ’56 20,00

LOCKSC 132 8011106 Lock for front toolbox (distance 40 mm) 150 LD ’54-’56 20,00C 130 99108810 Steering lock All 40,00C 131 99098670 Rear tool box complete lock 150 D 40,00C 133 12181371 Lock for rear toolbox 125-150 LD '57 20,00C 133 8011106 Lock for front toolbox (distance 28 mm) 150 LD ’54-’56 20,00

BADGESC 146 99097012 Pair of “Lambretta” transfers 150 D 6,00C 148 7181121 Front badge “Innocenti” 150 D 12,00C 150 8181121 Plastic shield emblem “LD” 125 LD der. 40,00C 151 12181121 Plastic shield emblem 150 LD 150 LD 40,00C 152 11181046 “150 D” badge 150 D 8,00C 153 12180164 “Lambretta 150 LD” badge 150 LD'57 12,00C 154 12180186 “Lambretta 125 LD” badge 125 LD'57 12,00C 156 12180111 Front plastic badge “Innocenti” 125-150 LD'57 12,00C 217 “Running In” sticker All 3,00C 225 “RIV” rear shock sticker 150 D-LD-LD'57 1,50

BODYWORK METALLIC PARTSC 239 99095903 Brake pedal bush All 3,00C 267 12090368/9 Pair panel lock mechanism LD 50,00C 274 11181057 Toolbox under front seat (complete) 150 D 56,00

28 And ’out the new book “Lambretta accessories” with hundreds of original illustrations.



C 275 7180155 Round toolbox cover 150 D 12,00C 276 7180156 Spring clip for toolbox cover 150 D 4,00C 250 99098625 Rear toolbox clamp 150 D 8,00C 277/B 99098640 Rear toolbox cover 150 D 40,00C 278 99098690 Fastener for locking rear toolbox 150 D 20,00C 255 5180202 Panel handle left LD all 8,00C 256 5180201 Panel handle right LD all 8,00C 258/B 15055042 Spring for panel lock LD all 4,00C 252 05180242 Spring for fix the panel lock rubber LD 3,00C 247 99095904 Brake pedal return spring LD all 5,00C 259 7181121 Front badge support 150 D 18,00C 260 7180150 Floor channel kit (4 pcs.) 150 D 48,00C 262 7180117 Legshield support pin 150 D 10,00C 263 7011221 Support for number plate 150 D 12,00C 264 7010603 Upper No. plate spacer for support 150 D 5,00C 285 11010608 Lower No. plate spacer for support 150 D 5,00C 284 40011811 Number plate 125-150 LD-150 D 20,00C 284/B 51011060 Number plate LD'57 20,00C 261 08010603 External spacer for number plate LD 5,00C 261/B 51011060 Internal spacer for number plate LD 5,00C 266 ✩ 8180144 Floor channel kit (6 pieces) 150 LD-LD'57 28,00C 268 8180142 Floor channel end cap. 150 LD-LD'57 2,00C 268/K Kit 12 pcs. floor channel end caps + screws 150 LD 30,00C 272 12180190 Floor channel kit (6 pcs.) 125 LD der.-LD'57 72,00C 270 12180269 Pair of chrome grilles for panels Breaking LD'56-LD'57 30,00C 447 � 12181181 Righthand side panel LD 120,00C 446 � 12181186 Lefthand side panel LD 120,00C 457 � 8181041 Righthand rear footboard 125-150 LD 60,00C 456 � 8181046 Lefthand rear footboard 125-150 LD 60,00C 460 � 8771046 Front mudguard LD 90,00C 463 � 99106050 Front mudguard D 90,00C 464 � 7181021 Rear mudguard D 120,00C 465 � 11180130 Legshield 150 D 220,00C 467 � 99098630 Rear toolbox (without lid) 150 D 90,00C 470 � 8011376 Tool box inside the legshield (with lock) 150 LD 60,00

SEATSC 329 Front-rear seat cover green (each) 125 LD der.-150 D 40,00C 335 Front seat cover green 150 LD 45,00C 336 Rear seat cover green 150 LD 45,00C 337 Front seat cover black 125-150 LD'57 45,00C 337/B Front seat cover black (spring distance 22 cm)150 LD '57 I series 45,00C 338 Rear seat cover black 125-150 LD'57 45,00C 281 Front seat chrome spring-conical 125 LD der.-150 D 38,00C 282 Front seat chrome spring-biconical 150 LD-LD'57-125'57 38,00C 295/A Rear central spring seat chrome All 15,00C 38 8181226 Green rubber for passenger handle 150 D-LD-125 LD der. 5,00C 63 99095570 Black rubber for passenger handle 125-150 LD'57 5,00C 271 8181226 Metal passenger handle All 16,00C 391 7181031 Rear frame seat (without cover) D 125,00

ELECTRICAL-SWITCHESE 3 99098002 Headlamp chrome rim 150 D 22,00E 4 99098009 Headlamp fixing spring kit 150 D 4,00E 18 8011406 Headlamp chrome rim 125 LD der.-150 LD 30,00E 19 5010131 Headlamp fixing spring kit LD ’54-’56 4,00E 5 99098006 Headlamp glass gasket All 4,00E 7 99098007 Headlamp glass All 18,00E 8 7011337 Headlamp reflector with bulb holder All 18,00E 22 99098120 Horn 125-150 LD-150 D 36,00E 23 08010302 Horn white gasket LD all 3,00E 35 12011731 Horn 125-150 LD'57 36,00E 16 6A305 Horn support D 4,00

E 17 06011068 Horn support clamp D 12,00E 25 11011451 Battery support tray 150 D II series 52,00E 401 19081170 Battery 6 volt 150 D-LD II v.-LD’57 56,00E 24 11011186 Light switch white with chrome cover D-LD first version 40,00E 26 11011186 Light switch oval D-LD half ’55-’56 40,00E 27 12011621 Light switch LD electric starter 56,00E 28 � 12011716 Light switch 125-150 LD'57 40,00E 29 12011836 Headlamp chrome rim 125-150 LD'57 30,00E 30 8010142 Green headlight “spy” gem All 2,00E 20 7010607 Rear light with bulb holder 125-150 LD-D’54/’56 40,00E 31 12010610 Rear light lense 125-150 LD'57 10,00E 32 12011821 Rear light complete 125-150 LD'57 86,00E 32/B 12010609 Fixing bar for rear light LD’57 6,00E 33 12010611 Rear light gasket 125-150 LD'57 3,00E 34 12010160 Peak for headlamp 125-150 LD'57 15,00E 300 � 15080003 Headlamp bulb 25/25W x 6V All 2,00E 301 � 15080004 Torpedo festoon bulb 5W x 6V Battery Models 1,00E 312 � 7010146 Torpedo festoon bulb 10W x 6V Non Battery Models 1,00E 301 � 15080004 Torpedo festoon bulb 5W x 6V rear light All 1,00

ELECTRICAL-LOOMSE 106 99098221 Protection cap L.T. socket All 3,00E 107 11010511 Protection cap L.T. coil All 2,00E 108 14080102 Protection cap for horn 125-150 D-LD 3,00E 109 Wiring loom (battery models) 150 D 22,00E 109/B Wiring loom (non battery models) 150 D-LD Iv.-125 LD 20,00E 109/C Wiring loom (battery models) 150 LD-LD’57 22,00E 410 11011366 Earth wire All 7,00E 112 15017070 Spark plug cap All 4,00E 99/B Stop switch All 10,00E 320 � 14010701 Spark plug All 3,00

ELECTRICAL-FLYWHEELE 136 MVA21/70 L.T. socket 150 D-LD I series 12,00E 144 11011231 L.T. socket D-LD IIv.-LD'57 15,00E 141 811384 H.T. coil original type All 92,00E 330 811370 Spring fly automatic advance Fils All flywheel Filso 5,00E 131 811342 Fils pins (hammer rocker) 150 D-LD '55 15,00E 254 811432 Contact points Filso 125-150 D-LD '56-'57 15,00E 251 � 811282 Condenser Filso All 8,00E 252 � 831524 Contact points Marelli All 15,00E 133 831521 Condenser Marelli All 8,00E 450 11110506 Round grille for main cowl All 30,00E 132 831411 Coil H.T. 125 LD ’56 I vers. 60,00E 140 821323 H.T. socket 125 LD ’56 I vers. 20,00

HANDLEBARSL 20 7770422 Lever pin All 5,00L 19 11771136 Pair of plastic levers All 20,00L 17 6770320 Grub for inner sleeve All 1,00L 201 11770222 Alloy handlebars All until end of ’56 50,00L 202 11770230 Steel handlebars chromed All after mid. ’56 50,00

GRIPSL 49 7770403 Grips (pr.) All 8,00

CABLES-VARIOUSL 34 7770322 Metal tube under the grips All 10,00L 64 85700025 Outer cable stop top hat (ferrule) All 2,00L 71 15059009 Outer stop (ferrule) for rear brake cable All 2,50L 61 Outer cable stop top hat (for clutch cable) D-LD III s. 3,00L 82 99096124 Handlebar clutch/brake adjuster All 5,00L 84 99095908 Rear brake cable clamp All 4,00



29




CARBURETTORB 12/B 8171061 Fuel tap 150 D 30,00B 6/B Carburettor gasket kit All 4,00B 18 12171056 Fuel tap LD all 40,00B 19 12171026 Fuel tap lever LD all 15,00B 10/B Fuel tap gasket All 1,00B 20 12110716 Air hose 125-150 LD'57 14,00B 21 412053 Carburettor throttle cable protection All 2,00B 17 12110708 Choke knob control complete LD 25,00

SPEEDOMETERA 1 610021 Complete cable 150 LD 12,00A 2 611007 Complete cable 150 D-LD'57 12,00A 2/A Speedometer square chrome ring LD'57 14,00A 2/B 611003 Speedometer square glass 150 LD'57 4,00A 2/C Speedo face transfer 150 LD'57 10,00C 58 611010 Speedometer square grey/gasket 150 LD'57 3,00A 22 Speedo drive to the rear wheel (short axe) D-LD short pin 80,00A 23 610335 Speedo drive to the rear wheel (long axe) D-LD long pin 80,00A 24 11011146 Speedo round support for 125 D D 30,00A 25 � 611000 Speedo square type new production (km/h) LD ’57 50,00A 2/S 611007 Speedo cable for A 25 LD '57 15,00A 313 12010940 Speedometer cover 125 LD’57 15,00

L 85 99095907 Pin for cable clamp All 2,00L 86 7180151 Support for cable under legshield 150 D 6,00L 86/B 12180177 Support for cable under legshield LD-LD'57 8,00L 87 99095912 Rear brake adjuster All 4,00L 88 7180727 Support for rear brake adjuster All 4,00L 90 15059012 Pair plate to fix the rear brake cable All 5,00L 95 96507 Front brake fixing cable 125-150 D-LD 4,00L 95/B 11770802 Front brake adjuster and fixing cable 125-150 LD'57 8,00L 96 Inner and outer cable kit 150 D 28,00L 97 Inner and outer cable kit 125-150 LD 30,00L 97/B Cable tube protection kit (10 pcs.) 150 LD ‘55-’56 50,00L 98 Inner and outer cable kit 125-150 LD'57 30,00L 99 11770303 Gear cable triangular protection 125LD-150D-LD'57 4,00L 100 12770237 Gas cable round protection 125LD-125-150LD'57 3,00L 102 11180142 Cable clip retaining 150 D 10,00L 104 11030305 Clip for gear cable under K/start 125-150 D-LD 4,00L 103 11180728 Clip for brake cable under K/start 125-150 D-LD 4,00L 105 86500260 Outer cable aluminium tie All 1,00L 106 11030308 Gear cable adjuster All 6,00L 164 11030302 Gear box cover All 12,00L 121 12770231/2 Pair grey grommet for horncast cables 125 LD deriv. ’56 16,00L 154 12111126 Starter cable LD all 5,00L 159 “L” tube for gas cable on the handlebar 150D 8,00

LD left and right hood.

LD front mudguard. 125-150 D back seat.

LD left and right passenger platform. Plates rim shaped for lamp(see accessories page).

150 LD pannier in the shield.


C 446-C 447 C 456-C 457

A 127

C 460

C 391C 470


30

Second version: all in the same Sand-Beigeor Light-Grey colour.

And the very first version Lambretta 125 1953 (prototype).

Lambretta 125 F 1954 first version.

Lambretta second series 125 F 1955.

Maintenance data:

Mixture 5% spark plug 225 Bosch short reachEngine oil SAE 15/50 300 gr. transmission oil SAE 140 100 gr.Carburettor MU 14B1 (E)main jet 68 auxiliary jet 268B1 slide 50Carburettor MU 14C1 (F)main jet 72 auxiliary jet 270 slide 40 Ignition advance 25° deg. BTDC 24,5 mm around the flywheel circumference

“Casa Lambretta”

stands for quality:Made by OSC (ex. GPM) exclusively

for us. They are absolutely as per the

originals: chrome-plated horn cover

with central bachelite emblem,

aluminium-bottom and plastic clamp

with brass-insert.

For the reconstruction of its parts “Casa Lambretta” uses only the original drawings.

E 15

E 22

Lambretta 125 E-F-F 2nd. ser.125 E produced from April 1953 until February1954 in 42.352 examples.125 F produced from March 1954 until April1955 in 32.701 examples.From frame number:125 E n. 00.001125 F n. 34.000 approx.

Identification particulars 125 E:First version up to mid. ’53Luggage box lid without hooks, manual ignitionadvance & retard lever, bodywork welded to theframe.Second version from mid. ’53 onwardsFixed ignition timing, body-work fixed to theframe with screws, luggage box lid with hooks,front mudguard with supplementary fixingbrackets (these last couple of modificationsbelong to the very last production models).Until the end of production the silencer had a shortleft sided tailpipe.

Lechler colour codes:Olive Green 8021

Colour schemes:All in the same Olive-Green colour, except thewheel rims, the seat frames, the hubs, the stand,the lever torsion shafts under the silencer paintedwith Aluminium colour FIAT 690.The crankcase is always painted with Aluminiumcolour FIAT 690.

Identification particulars 125 F-F 2nd. ser.:The very first version 1954 following theModel EThis model is transformed from E to F by thefactory itself: you can see the writing E on theframe, while the writing ‘F’ on the tail is obtainedfrom milling the E letter; seat covers are againin brown.First version from 1954Seat frames as per Model E, but with Greencovers (front seat with one only one horizontalcylindrical spring):Second version late 1954 until 1955Seat frames as per 150 D (front seat with twocylindrical vertical springs).Second series 1955Fork as per Model D, uplifted handlebar, coiland external condenser.

Lechler colour codes:Sand Beige 8029 • Light Grey 8012

Colour schemes:The very first version (following the E Model):the same scheme and colour as per E model.FIRST and SECOND VERSION: all in the sameSand-Beige colour.

LAMBRETTA 125 E-F

31



ENGINEM 1 91207 Piston size 52 mm + oversizes E-F 48,00M 25 91230 Conrod complee kit E-F 60,00M 243 91205 Rod bush E-F 6,00M 44 91210 Crankshaft complete E-F 200,00M 66 91101 Cylinder E-F 140,00M 89 91102 Cylinder head E-F 50,00M 110 Engine oilseal kit E 20,00M 110/B Engine oilseal kit F 20,00M 126 92010 Clutch plates (2 pcs.) Surflex E-F 28,00M 148 91347 Kick start return spring F 8,00M 149 91314 Disc with holes for kick start mechanism E-F 30,00M 157 91349 Kick start shaft F 10,00M 166 Engine gasket kit E-F 22,00M 190 95660 Silencer E last prod./F 140,00M 190/E 95660 Silencer E 150,00M 273 9.5.650 Silencer bracket E-F 10,00M 274 9.5.601 Chrome clamp for silencer E-F 12,00M 204 ✩ 91212 Crankshaft bearing (6203) E-F 10,00M 201 ✩ 92007 Gear bearing E-F 14,00M 202 ✩ 94029 Rear axle bearing F 8,00M 221 2906 Needle bearing kit for gear E-F 5,00M 105 Hand start complete E 350,00

FRONT SUSPENSIONT 25 99106052 Pair of end buffers F II series 4,00T 26 99106066 Pair of round gasket for links F II series 2,00T 27 99106051 Spring F II series 10,00T 28 99106062 Link lever right F II series 80,00T 30 99106065 Pair of fork bushes F II series 10,00T 31 99106064 Pair of covers for fork bushes F II series 8,00T 32 99106053 Pair of covers for fork gaskets F II series 4,00T 33 99106056 Trailing link right F II series 25,00T 34 99106057 Trailing link left F II series 25,00T 36 96022 Pair of “C” rubbers E-F 20,00T 37 96080 “Special “C” spring E-F I s. 50,00T 38 96018 Link pin E-F 10,00T 39 96013 Bush link pin E-F 5,00T 40 96020 Link lever left E-F 25,00T 41 96030 Link lever right E-F 25,00T 43 Cone kit for forks E-F 40,00M 222 2903 Steering bearing upper kit E-F 2,00M 224 2901 Steering bearing lower kit E-F 3,00T 44 96108 Lower steering bearing cover E-F 12,00

REAR SUSPENSIONT 95 95820 Frame buffer stop E-F 4,00T 96 95032 Engine buffer stop E-F 4,00T 97 95031 Frame bush E-F 10,00T 98 95803 Lock washer right E-F 3,00T 99 95808 Lock washer left E-F 3,00T 100/B 95801 Engine support tube E-F 80,00T 101 95812 Torsion bar E-F 50,00

WHEELST 115 94460 Front brake lever E-F 10,00T 130 94530 Rear brake shoes E-F 25,00T 131 94450 Front brake shoes E-F 25,00T 251 094419 Front brake return spring All 5,00T 252 094507 Rear brake return spring All 5,00T 137 94420 Wheelrims E-F 40,00T 173 94426 Tube 4.00 x 8 Michelin E-F 15,00

T 174 94425 Tyre 4.00 x 8 Sava E-F 35,00T 176 ✩ 94425 Tyre 4.00 x 8 Sava whitewall E-F 55,00

STANDT 221/B 95710 Side stand E-F 32,00T 201/B 95704 Spring E-F 6,00

BODYWORK PLASTICS & RUBBERSC 9 97007 Round filler cap gasket E-F 1,00C 9/C 97040 White filler cap E-F 10,00C 22 97008 Antivibration rubber for fuel tank E-F 4,00C 26 98626 Antivibration tubbers for toolbox (4 pcs.) E-F 4,00C 27 6A406 Pair of rubber passenger footrests E-F 8,00C 28 6A805 Gasket for spare wheel support E-F 2,00C 34 91355 Kick start rubber F 8,00C 40 95906 Brake pedal rubber E-F 3,00C 40/B 91309 Rubber handle for starter E 18,00C 40/C 91370 Grommet for starter cable E 5,00C 36 7180302 Mudguard antivibration buffer F II series 2,00C 42/B 98601 Round plastic toolbox cover E-F 12,00C 47/E 95110 Rubber floor channel kit (4 pcs.) E 75,00C 47/F 95110 Rubber floor channel kit (4 pcs.) F 75,00C 24/B 095062 Antivibration rubber for legshield F 2,00

LOCKSC 131 98670 Rear tool box complete lock E-F 40,00

BADGESC 146 97012 Pair of “Lambretta” stickers E-F 6,00C 148 95180 Front badge “Innocenti” (metallic) E-F 12,00C 155 95130 Front badge with support (plastic) E-F 40,00

BODYWORK METALLIC PARTSC 239 95903 Brake pedal bush E-F 3,00C 247 95904 Brake pedal return spring E-F 5,00C 250 98625 Rear toolbox clamp E-F 8,00C 277/B 98640 Rear toolbox cover E-F 40,00C 438 09.8.640 Toolbox lid without hook E 40,00C 467 � 9.8.640 Rear toolbox (without lid) E-F 90,00C 278 98690 Fastener for locking rear toolbox E-F 20,00C 279 95180 Front emblem support (metal) E-F 20,00C 276 98602 Retaining spring clip for toolbox cover E-F 4,00C 410/E Floor legshield extension for handstart E model E 70,00C 463 � 10.6.050 Front mudguard F II s. 90,00

SEATSC 332 Front/rear cover seat brown (each) E 40,00C 333 Front/rear cover seat green (each) F I series 40,00C 329 Front/rear seat cover green (each) F II series - II series 40,00C 281 Front seat chrome spring conical F II series 38,00C 283 95540 Spring seat with hook E-F very first series 25,00C 295/A Rear central spring seat chrome F II series - II serie 15,00C 280 95504 Chrome handle passenger E-Fvery first series 40,00C 271 8181226 Metal passenger handle F II series - II series 16,00C 38 8181226 Green rubber for passenger handle F II series - II series 5,00

ELECTRICAL-SWITCHESE 3 98010 Headlamp chrome rim E-F 22,00E 4 98009 Headlamp fixing spring fix E-F 4,00E 5 98006 Headlamp glass gasket E-F 4,00E 7 98007 Headlamp glass E-F 18,00E 8 98003 Headlamp reflector with bulb holder E-F 18,00E 21 98040 Light switch plastic cover E 40,00


32



E 26 98040 Light switch chrome cover F 40,00E 22 98120 Horn E-F 36,00E 16 6A305 Horn support E-F 4,00E 20 98310 Rear light with bulb holder E-F 40,00E 305 � 98008 Headlamp bulb 15/15 W x 6 V E-F 2,00E 301 � 98301 Torpedo festoon bulb 5W x 6V E-F 1,00

ELECTRICAL-WIRING LOOMSE 100 98217 Protection cap L.T. socket E 3,00E 106 99098221 Protection cap L.T. socket F 3,00E 102 98204 Protection cap for spark plug E-F 3,00E 104 Wiring loom E-F 20,00E 108 98102 Protection cap for horn E-F 3,00E 112 15017070 Spark plug cap E-F 4,00E 320 � 7110803 Spark plug E-F 3,00E 99/B Stop switch E-F 10,00

ELECTRICAL-FLYWHEELE 200 811300 Contact points Filso E-F 12,00E 153 811299 Condenser Filso E-F 6,00E 202 811295 Coil H.T. manual retard Filso E on requestE 203 811320 Coil H.T. automatic retard Filso E-F on requestE 204 � 831459 Contact points Marelli E-F 18,00E 205 831469 Condenser Marelli E-F 8,00E 211 831540 Condenser Marelli external F II series 8,00E 206 831454 Coil H.T. manual retard Marelli E on requestE 207 831470 Coil H.T. automatic retard Marelli E-F on requestE 214 831513 Coil H.T. automatic retard Marelli E-F on requestE 208 821306 Contact points Nassetti E-F 12,00E 153 821305 Condenser Nassetti E-F 8,00E 210 821302 Coil H.T. automatic retard Nasselli E on requestE 213 821334 Coil H.T. automatic retard Nasselli E-F on requestE 140 821323 H.T. socket E-F 20,00E 136 821324 L.T. socket E-F 12,00

E 160 831534 External coil H.T. F II series on request

HANDLEBARSL 19 96220 Pair of plastic levers E-F 20,00L 10 96209 Lever pin E-F 5,00L 168 9.6.128/115 Pair handlebar throttle/gear cover chrome E-F 30,00L 169 Clamp to fix the throttle cable on the handlebar E-F 6,00

GRIPSL 48 96206 Pair of grips E-F 8,00

CABLES-VARIOUSL 64 85700025 Handlebar clutch/brake adjuster E-F 2,00L 71 Outer stop (ferrule) for rear brake cable E-F 2,50L 82 96124 Handlebar clutch/brake adjuster E-F 5,00L 84 95940 Rear brake cable clamp E-F 4,00L 85 95907 Pin for cable clamp E-F 2,00L 87 95912 Rear brale adjuster E-F 4,00L 89 93290 Gear cable Teleflex complete E-F 50,00L 90 95908 Pair plate to fix the rear brake cable E-F 4,00L 91 93202 Fork for fixing Teleflex E-F 5,00L 92 2101 Pin for fork fixing Teleflex E-F 3,00L 93 Inner and outer cable kit E-F 22,00L 94 93209 Conical protection rubber for Teleflex E-F 3,00L 95 96507 Front brake fixing cable E-F 4,00L 105 98218 Aluminium cable tie E-F 1,00L 105/B 98219 Front brake cable retaining clip E-F I series 1,00

CARBURETTORB 12 97110 Fuel tap E-F 20,00B 10/B Fuel tap gasket E-F 1,00B 1 09.1.110 Silent block for carburettor E-F 24,00



Complete hand start mechanism 125E. Silent block for carburettor E-F,Pairs chrome plates for handlebar E-F.

Rubber floor strips with metal insert 125E.


M 105

C 47-E

L 168 B 1

33

Lambretta 125-150 LI175 TV 1st. Series125 LI produced from June 1958 until October1959 in 47.747 examples.150 LI produced from April 1958 until October1959 in 108.984 examples.175 TV produced from September 1957 untilDecember 1958 in 10.089 examples.From frame number:125 LI n. 508.000 approx.150 LI n. 500.001175 TV n. 01.000

Identification particulars 125-150 LI:

First version up to September 1958Air filter with steel-wool, passenger handlebaron the rear seat, non adjustable one pieceengine chain guide.Only for the very early 150 production: side panelswith oval air induction hole as per 175 TV.

Second version up to December 1958Additional cylindrical air filter with papercartridge, passenger handle on the front seat,adjustable chain guides.

The last version until end of production:Air filter box between the luggage box and thefuel tank with paper filter cartridge, brake pedalwith small splashguard, fuel cap with air hole.

Lechler colour codes:Alba Grey 8019 • Dark-steel Grey 8040Flaminia light-Blue 8032 • English-Blue 8031 Nile-Green 8015 • Ruby-Red 8047 • Coral-Red 8046 • River-Grey 8014

Colour schemes 125 LI:All in the same Alba-Grey colour (including thelever supports on the handlebar, and in somecases the rear grille), except the sidepanels,that could be painted in Dark steel-Grey.On the second version the box including thesupplementary air filter is also painted.

Colour schemes 150 LI:All in the same River-Grey colour (especiallythe first production).All in the same Alba-Grey colour, except thesidepanels, the horncasting and the handlebar,that are painted in either: Flaminia-light Blue,English-Blue, Nile-Green, Ruby-Red, Coral-Red.On the second version, the box including thesupplementary air filter, is painted.

Identification particulars 175 TV:First version up to April 1958The horncasting with fixed horn grille,ballbearing on crankshaft at flywheel side.

Second version up to June 1958The horn casting with screw fixed horn grille,flywheel side roller bearing on crankshaft,splashplate fitted to the centre stand. The last version up to end of production:

Simplified front brake and clutch levers withoutregistration knuckles.

Lechler colour codes:Ivory 8028

Colour schemes:All in the same Ivory colour including front andrear shock absorbers.The rear mudguard, the cylinder cowl, theunderside of the passenger foot-boards, the

underside of the front legshield and the insideof the side panels are painted in anti-noisetextured paint and then covered with the actualbodywork colour.

Lambretta 175 TV first version 1957.

Lambretta 150 LI Is the second version 1959.

Maintenance data:

Mixture 175 TV 6%-- 125-150 LI 4% spark plug 225/240 Bosch long reach.Motor oil: 175TV SAE 30 1.000 cc 125-150 LI SAE 90 600 ccCarburettor (175TV) MA23BS5 main jet 105 pilot jet 40 slide 70Carburettor (125LI) MA18BS5 main jet 93 pilot jet 35 slide 50Carburettor (150LI) MA19BS5 main jet 96 pilot jet 40 slide 65Ignition advance 175TV 26°-28° deg. BTDC 32-33 mm around the flywheel circumferenceIgnition advance 125-150 LI 22°-24° deg. BTDC 32-33 mm around the flywheel circumference

“Casa Lambretta” is perfection:

REAR TAIL LIGHT 175 TV

It is remade as per the original design: central red

body with external orange parts divided with two

chrome-plated aluminium strips.


E 39/B

LAMBRETTA 125-150 LI 175 TV

34



ENGINEM 6 15012025 Piston 60 mm + oversizes TV 60,00M 7 19112050 Piston 52 mm + oversizes 125 LI 54,00M 8 19012050 Piston 57 mm + oversizes 150 LI 54,00M 28 Conrod complete kit TV 72,00M 31 Conrod complete kit 125-150 LI 72,00M 245 15012005 Conrod bush 16 mm All 6,00M 47 15012040 Crankshaft complete TV on requestM 48 19012010 Crankshaft complete 125-150 LI 180,00M 70 19011010 Cylinder 150 LI on requestM 71 19011020 Cylinder 125 LI on requestM 93/A 19111015 Cylinder head 125 LI on requestM 94/A 19911015 Cylinder head 150 LI on requestM 112 Engine oilseal kit TV 20,00M 113 Engine oilseal kit 125-150 LI 17,00M 127 15020010 Clutch plates (2 pcs.) Surflex TV 40,00M 128 19020050 Clutch plates (4 pcs.) Surflex 125-150 LI 30,00M 128/B 19020050 Clutch plates (4 pcs.) Surflex + springs 125-150 LI 38,00M 136 19020050/21 Complete clutch kit: cork disc, steel disc, spring (Surflex) 125-150 LI 60,00M 134 19021007 External clutch spring lever 125-150 LI 5,00M 235 19021002 Inside control lever clutch 125-150 LI 6,00M 236 19021001 Clutch push rod 125-150 LI 5,00M 283 � 19020080 Clutch housing 125-150 LI 25,00M 138 ✩ 15041010 Transmission chain TV 25,00M 139 ✩ 19041090 Transmission chain 125-150 LI 25,00M 142 19041060 Upper chain guide 125-150 LI 15,00M 143 19041021 Lower chain guide 125-150 LI 20,00M 150 19031007 Sliding dog 125-150 LI 80,00M 248 19031008 Sliding dog spring 125-150 LI 2,00M 276 19031014 Pin for sliding dog M150 125-150 LI 5,00M 158 19030031 Kick start shaft 125-150 LI 68,00M 234 19030025/26 Pair bronze bush for kick start shaft 125-150 LI 12,00M 155 19030015 Kick start piston shaft and pin LI 12,00M 249 19030017 Start piston spring 125-150 LI 2,00M 168 � 19030041 Kick start lever chrome LI 56,00M 182 19030027 Spring return kick start lever LI 8,00M 171 Engine gasket kit TV 30,00M 172 Engine gasket kit 125 LI 18,00M 173 Engine gasket kit 150 LI 18,00M 241 19010056 Gasket engine cover transmission 125-150 LI 4,00M 192 19018060 Silencer complete (incl. tail pipe) 125-150 LI 110,00M 192/C 19018060 Silencer complete (incl. tail pipe) TV 240,00M 199 19018019 Silencer/U bend clamp 125-150 LI 8,00M 212/B ✩ 19012033 Crankshaft bearing needle (N205) 125-150 LI 65,00M 214 ✩ 19012031 Crankshaft bearing (6305) 125-150 LI 18,00M 208 ✩ 1403008 Gear cluster bearing (6004) 125-150 LI 10,00M 215 19030019 Special rear axle bearing 125-150 LI 35,00M 230 19030020/35 Kit 4 needle cage for gear and clutch All 30,00M 232 19010044 Bronze bush for shaft gear control 125-150 LI 5,00

FRONT SUSPENSIONT 45 15060070 Lower buffer All 5,00T 46 15060100 Upper buffer All 5,00T 46/K 15060070/00 Kit 4 fork buffer + screws and washers All 23,00T 47 15060021 Spring All 10,00T 47/B 19060090 Push rod spring All 12,00T 62 15060016 Complete fork link pin & bush kit (grease type) All 25,00T 49 15060017 Cup washer for fork link bush All 0,50T 49/B 15060030 Upper bush for fork spring (Nylon) All 3,00T 50 � 15060080 Front shock absorber Ø 25 mm TV 32,00T 237 15060080 Front shock adsorber / 20 mm TV 48,00T 53 Cone kit for fork All 40,00

T 35/B 15061060 Upper steering bearing All 3,00T 35/C 15060020 Lower steering bearing All 4,00T 44 15061024 Lower steering bearing cover All 12,00

REAR SUSPENSIONT 102/B 19058010 Shock absorber complete 125-150 LI 72,00T 106 19010036 Engine bumpstop buffer 125-150 LI 3,00T 110 19010030 Engine silentblock 125-150 LI 18,00

WHEELSM 202 15044005 Front hub bearing (6201) All 8,00T 120 15044011 Front hub oil seal All 3,00T 123 15044028 Speedometer drive oil seal All 3,00T 252 15044023 Brake return spring All 5,00T 254 15044044 Kit elastic washer,whaser and circ clip for brake shoes All 5,00T 253 15044006 Front axe spacer between two bearings All 5,00T 139 15044017 Front brake lever All 12,00T 140 19059019 Rear brake lever 125-150 LI 10,00T 142 19045030 Rear drum hub 125-150 LI 90,00T 143 15044040 Pair of brake shoes 175ant-125-150LI 25,00T 147 19044034 Wheelrims 125-150 LI 34,00A 192 19044034 Wheelrims all chrome TV 40,00T 178 ✩ 15044036 Tyre 3.50 x 10 Michelin S 83 All 45,00T 180 15044036 Tyre 3.50 x 10 Sava whitewall All 54,00T 183 15044037 Tyre 3.50 x 10 Sava whitewall All 15,00

STANDT 210 15057010 Stand All 30,00T 212 15057008 Pair of stand fixing plates All 4,00T 213 15057020 Pair of stand feet and pins black All 10,00T 214 ✩ 15057012 Splashplate All 22,00T 218 15057005 Spring All 6,00T 230 15057007 Rubber buffer All 2,00

BODYWORK PLASTICS & RUBBERSC 62/B 15041033 Kick start rubber TV 8,00C 84 19030037 Kick start rubber 125-150 LI 4,00C 82 15059003 Brake pedal rubber grey All 3,00C 72 15070019 Square tank buffer with split All 2,00C 65 15055059 Pair of sidepanel rubber beadings All 6,00C 66 15050021 Tank support buffer All 2,00C 67 15050065 Side panel buffer All 2,00C 18 15071002 Grommet for fuel tap control lever All 1,00C 70 15055046 Rubber shroud for panel handle inner spring All 2,00C 71 15050059 Pair of bridge piece rubbers All 4,00C 75 15050062 Pair of legshield rubber beadings All 6,00C 76 15050046 Horncast rubber beading kit (3 pcs.) All 6,00C 80 19050093 Floor channel rubber strip kit (6 pcs.) 150 LI 12,00C 81 19050300 Rear footboard plastic runners kit (4 pcs.) 125-150 LI 20,00C 73/K 15050052 Kit 22 pcs. antivibration rubber washer All 8,00C 73 15050052 Legshield antivibration rubber washer All 0,40C 74 15086009 Toolbox round buffer All 2,00C 74/B 15086011 Toolbox rubber beading All 4,00C 78 15060039 Buffer for inner front mudguard All 2,00C 83 15055057 Rectangular buffer for rear mudguard All 4,00C 83/B 15083002 Numberplate round rubber spacers kit All 5,00C 69 15041024 Kick start engine sidecasing buffer All 2,00C 50 15055071 Grommet for rear frame hole All 1,00C 23 19150103 Floor alloy channel spacer 125 LI 0,50C 79 15050080 Floor mats rubber kit (front & rear 4 pcs.) TV 180,00C 94 15070021 Petrol tank cap rubber All 1,00



LAMBRETTA 125-150 LI 175 TV

35



LOCKSC 133 15055056 Toolbox lock All 20,00C 136/A 15088010 Steering lock with cover All 22,00B 120 19988001 Kit screw, spring, pin, cover for steering lock All 8,00

BADGEC 157 15050160 Legshield badge “Lambretta” All 10,00C 158 19150200 Legshield badge “125 LI” 125 LI 8,00C 159 19050200 Legshield badge “150 LI” 150 LI 8,00C 160/B 15050200 Legshield badge “175 TV” TV 8,00C 161 15050071 Front plastic shield badge “Innocenti” All 10,00C 163 15055054 Side panel badge “TV 175” TV 28,00C 164 19055049 Pair of sidepanel badges “Lambretta” All 40,00C 164/B 15055051/49 Pair sidepanel badges “Lambretta” chrome TV 60,00C 218 19090001 “Running In” sticker 125-150 LI 2,00C 218/B 15090001 “Running In” sticker TV 4,00C 220 Air filter sticker LI round black filter 3,00C 221 19090012 Air filter sticker LI '59 oval filter 1,50C 225 “RIV” sticker for shock absorber All 1,50C 222 Green sticker for petrol flap All 2,00

BODYWORK METALLIC PARTSC 410 � 15050060 Front mudguard in steel All 95,00C 286 15055063 Panel handle left All 8,00C 287 15055064 Panel handle right All 8,00C 258/B 15055042 Spring for panel handle All 4,00C 252 15055047 Spring for fix the panel lock rubber All 3,00C 289 ✩ 19050091 All. floor channel kit (6 pcs.) 150 LI 28,00C 289/B 19150101 All. floor runners kit (6 pcs.) 125 LI 72,00C 268 8180142 Floor channel end cap (pressed ali.) 150 LI '58 2,00C 268/K Kit 12 pcs. floor channel end caps + screws 150 LI ’58 30,00C 290 19050108 Floor channel end cap (cast ali.) 150 LI '59 1,00C 290/K Kit 12 pcs. floor channel end caps + screws 150 LI ’59 20,00C 291 15050064 Legshield beading endcap All 3,00C 292/B 19050083 Horncasting horn grille All 26,00C 293/B 15055190/80 Pair panel lock mechanism LI-TV 50,00C 294 19055014 Rear frame alloy grille 125-150 LI 48,00C 295/C 15059004 Brake pedal return spring All 5,00C 239 15059005 Brake pedal bush All 3,00C 296 � 15070040 Filler cap All 6,00C 297 15070020 Tank strap complete All 12,00C 288/B 15083001 Numberplate support All 20,00C 383 � 19970010 Tank 125-150 LI 85,00C 436 � 15050057 Bottom legshield bridge All 20,00C 449 � 19055100 Righthand side panel 125-150 LI 120,00C 448 � 19055090 Lefthand side panel 125-150 LI 120,00C 459 � 19050101 Righthand rear footboard 125-150 LI 60,00C 458 � 19050054 Lefthand rear footboard 125-150 LI 60,00

SEATSC 341 Dual seat cover TV 90,00C 342 Front-rear seat cover (each) black 125-150 LI 45,00C 343 Front seat complete (frame + cover) 125-150 LI 130,00C 344 Rear seat complete (frame + cover) 125-150 LI 130,00C 295 Single seat main spring 125-150 LI 12,00C 63 Black rubber for passenger handle 125-150 LI '58 5,00C 360 19055280 Metal passenger handle flat type 125-150 LI '58 18,00C 361 19055290 Passenger seat strap round type 125-150 LI '59 24,00C 362 15055170 Passenger seat strap flat + hooks TV 35,00C 370 15055140 Complete long seat with strap TV 280,00C 371 Rear cushion rectangular LI 52,00

ELECTRICAL-SWITCHESE 36 15080020 Headlamp chrome rim All 30,00E 37 15080007 Headlamp reflector with bulbholder All 20,00E 40/B 15080006 Headlamp glass gasket All 4,00E 42 15080005 Headlamp glass All 18,00E 38 19083020 Rear light lense (high screw holes) All 12,00E 39 19083090 Rear light lense (low screw holes) All 12,00E 39/B 15083020 Rear light lense yellow-red TV 40,00E 40 15083006 Rear light gasket All 4,00E 41 � 19083040 Rear light complete (Indian) All 45,00E 41/B 15083003 Fixing bar for rear light All 5,00E 1 19283050 Rear light bulb support in rubber LI-TV 20,00E 43 � 19081270 Engine cut out button 125-150 LI 8,00E 44 � 19081350 Light switch 125-150 LI 20,00E 49 19281230 Headlamp/horn switch TV 30,00E 64 15081220 Switch with keys TV 40,00E 50/B 15050068 Green headlight “spy” gem All 2,00E 96 19081240 Horn 6V A.C. 125 LI 36,00E 66/D 19081240 Horn D.C. 150 LI-TV 35,00E 46 � 19081390 Stoplight switch 3 holes 150 LI-TV 8,00E 47 19281260 Stoplight switch 2 holes 125 LI 8,00E 300 � 15080003 Headlamp bulb 25/25W x 6V All 2,00E 306 � 40010146 Torpedo festoon bulb 3W x 6V front light All 1,00E 307 � 15083004 Torpedo festoon bulb 3W x 6V rear light All 1,00E 303 � 15087002 Speedometer bulb 3W x 12V 150 LI-TV 1,00

ELECTRICAL-WIRING LOOMSE 115/B Wiring loom (for battery) 125 LI 20,00E 115 Wiring loom (for battery) 150 LI 24,00E 111 15017003 Protection cap L.T. socket All 4,00E 112 15017070 Spark plug cap All 4,00E 112/B 19017016 Spark plug cable protection All 2,00E 114 19081045 Stop switch rubber All 3,00E 113 19081033 Rectangular regulator protection cap 150 LI late prod. 4,00E 401 19081170 Battery thin type 6 volt 150 LI 56,00E 402 19081290 Battery thick type 6 volt 175 TV 70,00E 321 � 15017070 Spark plug All 3,00E 410 19082130 Earth wire All 7,00E 125 19017018 Grommet for flywheel wiring LI II series 1,00E 424 15081180 Battery tray complete with strap TV 45,00

ELECTRICAL-FLYWHEELE 245 � 811419 Contact points Filso TV 12,00E 145 811411 Contact points Filso 125-150 LI 12,00E 251 � 811356 Condenser Filso All 8,00E 180 831599 Contact points Marelli 125-150 LI 12,00E 253 � 831521 Condenser Marelli 125-150 LI 8,00E 182 840022 Contact points Ducati 125-150 LI 12,00E 183 � 840024 Condenser Ducati 125-150 LI 8,00E 184 860006 Condenser Dansi 125-150 LI 12,00E 251 � 860007 Condenser Dansi 125-150 LI 8,00E 141 00811384 H.T. coil original type All 92,00E 144/B 15017030 L.T. socket All 15,00E 260 840082 H.T. coil adaptable (standard type) All 35,00E 452 � 19014030 Flywheel cowl 125-150 LI 40,00

HANDLEBARSL 22 19062018 Clutch-brake lever (each) 125-150 LI 10,00L 23 19062002 Lever pin with star washer 125-150 LI 4,00L 25 19062002 Lever pin (L 23) extra size 1 mm 125-150 LI 4,00L 26 19062019 Lever anti vibration cap 125-150 LI 0,80L 27 19062021 Lever anti vibration spring 125-150 LI 1,20

Want to know everything about scooters in the world? Buy the book “Museum & Scooters Lambretta” of 258 pages written by Vittorio Tessera.

36



Want to know all the Lambretta variations and changes? buy the new Book: Lambretta illustrated guide of the identification.

CARBURETTORB 26 15015020 Choke lever complete LI-TV 30,00B 27 � 412258 Carburettor MA19BS7 (Indian) 150 LI 60,00B 27/B Carburettor gasket kit All 3,50B 22 15016013 Air hose TV-LI '58 14,00B 30 19016021 Air hose 125-150 LI '59 10,00B 22/B 412288 Air filter round 125-150 LI '58 14,00B 31 19016120 Air filter oval 125-150 LI '59 8,00B 23 412213 Air filter membrane TV 36,00B 24 19071020 Fuel tap 125-150 LI 14,00B 25 19071010 Fuel tap lever 125-150 LI 14,00B 30/B 19016036 Air hose bottom cup 125-150 LI '59 2,50B 41 19016037 Spring ring for fixing bottom cup LI II series 3,00B 42 41016070 Valve bottom cup LI II series 6,00B 37/H Round gasket for air box (up) 125-150 LI '59 1,00B 37/A 19016035 Air box/inlet manifold oval gasket 125-150 LI '59 2,00B 21 412053 Protection cap for throttle cable All 2,00B 55 15050033 Rear air intake (cone rubber) TV LI I series 50,00B 262 19016150 Clamp for air hose (lower) 125-150 LI ’59 5,00B 264 19016160 Clamp for air hose (upper) 125-150 LI ’59 5,00B 271 19016028 Butterfly nut for air filter 125-150 LI ’59 4,00

SPEEDOMETERA 3 � Speedometer 80 km/h 125 LI 50,00A 4 � Speedometer 120 km/h TV 50,00A 5 � Speedometer 100 km/h 150 LI 50,00A 6 611011 Speedometer glass All 4,00A 7 611038 Cable complete All 10,00A 8 � 611042 Speedometer drive (2 pcs.) All 10,00A 300 Speedo face 80 km/h 125 LI 10,00A 301 Speedo face 100 km/h 150 LI 10,00A 302 Speedo face 120 km/h TV 10,00A 320 00611015 Speedo light support All 6,00A 321 611066 Speedo gasket All 4,00A 323 611027 Speedo alloy ring 125-150 LI 26,00A 324 611044 Speedo pinion support on the wheel (steel) All 12,00

L 24 19062022 Handlebar end round plastic bush All 20,00L 170 � 19062040 Gear handle 125-150 LI 40,00L 173 � 19063001 Alloy support for switch and front brake lever 125-150 LI 35,00

GRIPSL 51 19062016 Pair of grips All 8,00

CABLES-VARIOUSL 105 86500300 Outer cable aluminium tie All 1,00L 107 Inner and outer cables kit TV 30,00L 108 Inner and outer cables kit “with nylon” 125-150 LI 30,00L 109 15065004 Front brake adjuster All 10,00L 110 19059002 Rear brake adjuster 125-150 LI 10,00L 111 19022015 Cable clutch-gear rubber shroud (each) 125-150 LI 8,00L 71 15059009 Outer stop (ferrule) for rear brake cable All 2,50L 84 15059013 Rear brake cable clamp All 4,00L 90 15059012 Pair plate to fix the rear brake cable All 5,00L 85 15059014 Pin for cabel clamp All 2,00L 113 19090018 Clutch/gear outer cable protect. tube125-150 LI 0,50L 114 15017006 Triangular rubber support for throttle & H.T. cables 125-150 LI 2,00L 115 15022008 Gear cable clamp short 125-150 LI 3,00L 116 19032003 Gear cable clamp long 125-150 LI 3,00L 117 19031003 Gear lever (balancer) on the engine 125-150 LI 22,00L 117/B 19021006 Clutch lever on engine 125-150 LI 8,00L 118 19032005 Tie rod for gear control 125-150 LI 4,00L 118/B 19031016 Gear lever in the engine 125-150 LI 20,00L 165 Complete Kit gear change in the engine 125-150 LI 48,00L 119 19032001 Gear-clutch adjuster 7 mm (each) 125-150 LI 2,50L 120 19032007 Tie rod rubber protection cap 125-150 LI 2,50L 140 19222012 Spring clip for cable on the handlebar All 3,00L 141 19032024 Spring support for cables under choke All 5,00L 142 19090011 Cable clamp chrome on the front frame All 10,00L 144 19059006 Rear brake cable support All 4,00L 64 85701035 Outer stop (ferrule) All 2,00L 71 15059009 Outer stop (ferrule) for rear brake cable 125-150 LI 2,50L 147 19015019 “L” tube for choke cable All 8,00L 151 19015050 Choke cable All 5,00


BODY PARTS

NEWS BODY PARTS: panel, front mudguard, rear footboard, tank, legshield bridge.

Handlebar lever support.

C 410

C 458-C 459

C 448 C 436

L 170 L 173

Tank.

C 383

37

Lambretta 125-150 LI175 TV 2nd. Series125LI 2nd. ser. Produced from October 1959until November 1961 in 111.087 examples.150LI 2nd. ser. Produced from October 1959until November 1961 in 162.040 examples.175TV 2nd. ser. Produced from January 1959until November 1961 in 43.700 examples.From frame number:125LI 2nd. ser n. 700.001125LI 2nd. later production n. 300.001150LI 2nd. ser. n. 900.001175TV 2nd. ser. n. 100.001 first production175TV 2nd. ser. n. 200.001 second production

Identification particulars LI 2nd. ser. - TV.First version up to mid. 1960 Small rear tail light (142X43 mm), round horngrille, air filter elbow fixed by wingnut screw.Second version from mid. 1960 to January1961Larger tail light (130X58 mm), oval horn grille,air filter elbow fixed by wingnut screw.Third version from February 1961 to end ofproduction.Air filter elbow fixed with double hook spring,larger air filter (as per series 3).Centre stand splashplate fixed with two 8 mmscrews (from October ’60).

Lechler colour codes:Alba-Grey 8019 • Dark steel-Grey 8040Flaminia light-Blue 8032 • Ruby Red 8047 Coral-Red 8046 • Nile-Green 8015English-Blue 8031 • Tirreno light-Blue 8042 Orient-Yellow 8049 • River-Grey 8014 Biancospino Off White 8082

Colour schemes 125 LI 2nd. ser.All in the same Alba-Grey colour (including thelever supports on the handlebars andsometimes, the rear grille), except the sidepanelsthat could be painted in dark steel-Grey.

Colour schemes 150 LI 2nd. ser.All in the same River-Grey colour.All in the same Alba-Grey colour, except thesidepanels and the horn casting are painted in:Coral-Red, Ruby-Red, Flaminia light-Blue,Nile-Green, English-Blue.In some production batches River grey wasused as the base colour (particularly earlyproduction) and the Biancospino Off White(particularly end of production).

It is possible to paint only the sidepanels witha different colour and the horncasting remainsas per the bodywork colour.

Colour schemes 175TV 2nd. ser. Frame-number 100.000All in the same Tirreno light-Blue or Orient-Yellow colour, except the seat frame and itscatch which are painted in gloss black.The rear mudguard, half of the cylinder cowl(spark plug side), the underside of thepassenger footboards, the underside of thelegshields are painted in anti-noise texturedpaint. The inside of the sidepanels are paintedin anti-noise textured paint and, then, in thebodywork colour.

Lambretta 175 TV 2nd. ser. First production 1959.

Lambretta 150 LI 2nd. ser. First Series 1959.

“CasaLambretta” is safety:TV Front damperCompletely produced in Italy, a CasaLambrettaexclusive, this model accurately copies theoriginal RIV with a 20mm stem Euros 48,00.


LAMBRETTA 125-150 LI 175 TV IIs.

T 237

38



ENGINEM 11 19212090 Piston 62 mm + oversize TV 50,00M 9 19112090 Piston 52 mm + oversizes 125 LI 42,00M 10 19012090 Piston 57 mm + oversizes 150 LI 45,00M 10/A 19912200 Piston 57 mm + oversize “ASSO” 150 LI 88,00M 30 Conrod complete kit TV 72,00M 31 Conrod complete kit 125-150 LI 72,00M 50 19212140 Crankshaft complete TV 150,00M 49 19012140 Crankshaft complete 125-150 LI 150,00M 74 � 19211020 Cylinder TV 100,00M 72 19111020 Cylinder 125 LI 100,00M 73 � 19011020 Cylinder 150 LI 100,00M 95 19211015 Cylinder head TV 40,00M 93 � 19111015 Cylinder head 125 LI 38,00M 94 � 19011015 Cylinder head 150 LI 38,00C 440 � 19214020 Cylinder cowl All 20,00M 113 Engine oilseal kit TV I early prod. 17,00M 114 Engine oilseal kit 125-150 LI TV II late prod. 20,00M 128 19020050 Clutch plates (4 pcs.) Surflex All 30,00M 128/B 19020050 Clutch plates (4 pcs.) Surflex + springs All 38,00M 136 19020050/21 Complete clutch kit: cork disc, steel disc, spring (Surflex) All 60,00M 134 19021007 External clutch spring lever All 5,00M 235 19021002 Inside control lever clutch All 6,00M 236 19021001 Clutch push rod All 5,00M 283 � 19020080 Clutch housing All 25,00M 139 ✩ 19041130 Transmission chain All 25,00M 142 19041100 Upper chain guide All 15,00M 143 19041110 Lower chain guide All 20,00M 150 41031007 Sliding dog All 80,00M 248 19031008 Sliding dog spring All 2,00M 276 19031014 Pin for sliding dog M150 All 5,00M 158 19030031 Kick start shaft All 68,00M 234 19030025/26 Pair bronze bush for kick start shaft All 12,00M 155 19030015 Kick start shaft piston and pin All 12,00M 249 19030017 Start piston spring All 2,00M 168 � 19030041 Kick start lever chrome All 56,00M 182 19030027 Spring return kick start lever All until half ’61 8,00M 183 19030046 Spring return kick start lever All after half ’61 8,00M 174 Engine gasket kit TV 18,00M 172 Engine gastket kit 125 LI 18,00M 241 19010056 Gasket engine cover transmission All 4,00M 173 Engine gasket kit 125/150 LI 18,00M 192/B 19018130 Silencer + tailpipe All 85,00M 193 19218090 Exhaust tube All 30,00M 199 19018180 Exhaust tube clamp All 8,00M 212 ✩ 19012034 Crankshaft needle bearing (NU205) All 50,00M 214 ✩ 19012031 Crankshaft bearing (6305) All 18,00M 208 ✩ 19030033 Gear cluster main bearing (6004) All 10,00M 215 19030050 Special rear axle bearing All 35,00M 230 19030020/35 Kit 4 needle cage for gear and clutchAll 30,00M 239 19012130 Piston needle cage 16 mm All 8,00M 232 19010044 Bronze bush for shaft gear control All 5,00

Maintenance data:

Mixture 2% 125-150 LI / 4% 175TV spark plug 225/240 Bosch long reachMotor oil SAE 90 600 ccCarburettor (125LI) MA18BS5/BS7 main jet 73 pilot jet 35 slide 50Carburettor (150LI) MA19BS5/BS7 main jet 78 pilot jet 40 slide 50Carburettor (175TV) MB23BS5 main jet 110 pilot jet 40 slide 70Carburettor (175TV) MB21BS5 main jet 88 pilot jet 40 slide 70Ignition advance 22°-24° deg. BTDC 32-33 mm around the flywheel circumference

List of screws, nuts and accessories in the back of the catalog


FRONT SUSPENSIONT 45 15060070 Lower buffer All 5,00T 46 15060100 Upper buffer All 5,00T 46/K 15060070/00 Kit 4 fork buffer + screws and washers All 23,00T 47 19060021 Spring All 10,00T 47/B 19060090 Push rod spring All 12,00T 62 15060016 Bush and pin fork kit with grease nipple All until half ’60 25,00T 48 19060014 Bush and pin fork link kit All from mid ’60 18,00T 49 19060017 Cup washer for fork link bush All 0,50T 49/B 19060030 Upper bush for spring (Nylon) All 3,00T 50 � 15060080 Front shock absorber Ø 25 mm TV 32,00T 237 15060080 Front shock adsorber / 20 mm TV 48,00T 53 Cone kit for fork All 40,00T 35/B 15061060 Upper steering bearing All 3,00T 35/C 15060020 Lower steering bearing All 4,00T 231 � 19261022 Chrome ring under the handlebar LI-TV 40,00T 44 15061024 Lower steering bearing cover All 12,00

REAR SUSPENSIONT 102/B 19058100 Shock adsorber complete All 72,00T 106 19010036 Engine bumstop buffer All 3,00T 110 19010030 Engine silentblock All 18,00

WHEELSM 202 ✩ 15044005 Front hub bearing (6201) All 8,00T 120 15044011 Front hub oil seal All 3,00T 123 15044028 Speedometer drive oil seal All 3,00T 252 15044023 Brake return spring All 5,00T 254 15044044 Kit elastic washer,whaser and circ clip for brake shoes All 5,00T 253 15044006 Front axe spacer between two bearings All 5,00T 139 15044017 Front brake lever All 12,00T 140 19059019 Rear brake lever All 10,00T 142 19045090 Rear brake drum All 90,00T 143 15044040 Pair of brake shoes All 25,00T 147 19044034 Wheelrims All 34,00T 178 ✩ 15044036 Tyre 3.50 x 10 Michelin S 83 All 45,00T 180 15044036 Tyre 3.50 x 10 Sava whitewall All 54,00T 183 19044037 Tube 3.50 x 10 Michelin All 15,00

STANDT 210 15057010 Stand All 30,00T 212 15057008 Pair of stand fixing plates ll until '60 4,00T 213 Pair of rubber stand feet and pins black All 10,00T 214 ✩ 15057012 Stand splashplate (4 holes) ll until '60 22,00T 218 15057005 Spring All 6,00T 230 15057007 Stand buffer All 2,00T 215 ✩ 15057010 Stand splashplate (2 holes) All III series 30,00

BODYWORK PLASTICS & RUBBERSC 86 19030042 Kick start rubber black All 4,00C 82 15059003 Brake pedal rubber grey All 3,00C 72 15070019 Square tank buffer with split All 2,00

LAMBRETTA 125-150 LI 175 TV IIs.

39



C 65 15055059 Pair of side panel rubber beadings All 6,00C 66 15050021 Tank support buffer All 2,00C 67 15050065 Side panel buffer All 2,00C 18 87350060 Grommet for fuel tap control lever All 1,00C 70 15055046 Rubber boot for panel mechanism All 2,00C 71 15050059 Pair of bridge piece rubbers All 4,00C 75 15050062 Pair of legshield rubber beadings All 6,00C 76 15050046 Horncast rubber beading kit (3 pc.) All 6,00C 80 19050093 Floor channel rubber strips kit (6 pcs.) 150 LI-175 TV 12,00C 81 19050300 Rear footboard plastic runner kit (4 pcs.) All 20,00C 73/K 15050052 Kit 22 pcs. antivibration rubber washer All 8,00C 73 15050052 Legshield antivibration rubber washer All 0,40C 74 15086009 Toolbox round buffer All 2,00C 74/B 19086018 Toolbox rubber beading All 4,00C 78 15060039 Buffer for inner front mudguard All 2,00C 83 15055057 Rectangular buffer for rear mudguard All 4,00C 83/B 19083019 Numberplate round rubber spacers kit All 5,00C 69 15041024 Kick start round engine sidecasing buffer All 2,00C 50 15055071 Grommet for rear frame hole All 1,00C 89 19150105 Rubber gasket set for ali. runners (6 pcs.) 125 LI 20,00C 94 15070021 Petrol tank cap rubber gasket All 1,00

LOCKSC 135/A 19055060 Toolbox lock All 24,00C 136/A 15088010 Steering lock with flap All 22,00B 120 19988001 Kit screw, spring, pin, cover for steering lock All 8,00

BADGESC 157 15050160 Leshield badge “Lambretta” All 10,00C 158 19150200 Leshield badge “125 LI” 125 LI 8,00C 159 19050200 Leshield badge “150 LI” 150 LI 8,00C 160/B 15050200 Leshield badge “175 TV” TV (n. tel. 100.000) 8,00C 160 15050200 Leshield badge “175 TV” TV (n. tel. 200.000) 8,00C 162 19250071 Front plastic shield badge “Innocenti” All 12,00C 162/A 19250069 Spring clip for front badge “Innocenti” All 6,00C 163 15055054 Sidepanel badge “TV 175” TV 28,00C 164 19055049 Pair of sidepanel badges “Lambretta” All 40,00C 164/B 15055051/49 Pair sidepanel badges “Lambretta” chrome TV 60,00C 218 19090001 Running in sticker 125-150 LI 2,00C 219 19290001 Running in sticker TV 2,00C 221 19090012 Air filter sticker All 1,50C 225 “RIV” sticker for shock absorber All 1,50C 222 Green sticker for petrol flap All 2,00

BODYWORK METALLIC PARTS C 410 � 15050060 Front mudguard in steel All 95,00C 286 15055063 Panel handle left All 8,00C 287 15055064 Panel handle right All 8,00C 258/B 15055042 Spring for panel handle All 4,00C 252 15055047 Spring for fix the panel lock rubber All 3,00C 289 ✩ 19050091 Floor ali. channel kit (6 pcs.) 150 LI-175 TV 28,00C 289/B 19150101 Floor ali. runner kit (6 pcs.) 125 LI 72,00C 290 19050108 Floor channel endcap 150 LI-175 TV 1,00C 290/K Kit 12 pcs. floor channel end caps + screws LI-TV 20,00C 291 15050064 Legshield beading endcap All 3,00C 443 � 19250086 Alloy horncast (oval model) all from mid. ‘60 120,00C 292 19250083 Horncasting horn grille round All up to mid. '60 26,00C 293 19050114 Horncasting horn grille oval All after mid. '60 26,00C 293/B 15055190/80 Pair panel lock mechanism LI-TV 50,00C 294 19055014 Rear frame alloy grille All 48,00C 295/B 19059017 Brake pedal return spring All 6,00C 239 15059005 Brake pedal bush All 3,00C 296 � 19070040 Filler cap All 6,00C 297 15070020 Tank strap complete All 12,00C 288/B 15083001 Numberplate support for thin light LI-TV until mid. '60 20,00

C 288 15083001 Numberplate support for thick light LI-TV after mid. '60 20,00C 383 � 19970010 Tank All 60,00C 436 � 15050057 Bottom legshield bridge All 20,00C 449 � 19055100 Righthand side panel All 120,00C 448 � 19055090 Lefthand side panel All 120,00C 459 � 19050101 Righthand rear footboard All 60,00C 458 � 19050054 Lefthand rear footboard All 60,00

SEATSC 345 Dual seat cover blue TV 80,00C 342 Front-rear seat cover (each) black 125-150 LI 45,00C 343 Front seat complete (frame + cover) 125-150 LI 130,00C 344 Rear seat complete (frame + cover) 125-150 LI 130,00C 295 Single seat main spring 125-150 LI 12,00C 361 19055290 Passenger seat strap round type 125-150 LI 24,00C 362 15055170 Passenger seat strap flat + hooks TV 35,00C 371 Rear cushion rectangular LI 52,00

ELECTRICAL-SWITCHESE 45 19280020 Headlamp chrome ring All 30,00E 37 15080007 Headlamp reflector with bulbholder All 20,00E 40/B 19280006 Headlamp glass gasket All 4,00E 42 19280005 Headlamp glass All 18,00E 38 19083020 Rear light lense (high screw holes) All until mid. '60 12,00E 39 19083090 Rear light lense (low screw holes) All until mid. '60 12,00E 40 15083006 Rear light gasket All until mid. '60 4,00E 1 19280350 Rear light bulb support in rubber All until mid. ’60 20,00E 41 � 19083040 Rear light complete (indian) All until mid. '60 45,00E 50 19083180 Rear light lense CEV thick type All after mid. '60 8,00E 51 19083016 Gasket for lense E 50 All after mid. '60 3,00E 52 19083130 Rear reflector and bulb holder CEV All after mid.'60 20,00E 53 19083018 Rear light gasket All after mid. '60 4,00E 54 � 19083110 Rear light housing All after mid. '60 45,00E 41/B 15083003 Bar fixing rear light All 5,00E 43 � 19081270 Engine cut out button 125-150 LI 8,00E 44 � 19081360 Light switch 125-150 LI 20,00E 51/C 19261009 Green headlight spy gem All 2,00E 49 19281230 Headlamp/horn switch TV 30,00E 64 19281220 Switch with keys TV 40,00E 66 19581500 Horn 6V A.C. with bar 125 LI 1961 30,00E 66/B 19681500 Horn 6V D.C. with bar 150 LI-TV 1961 35,00E 96 19081240 Horn 6V A.C. 125 LI until ’60 36,00E 66/D 19081240 Horn D.C. 150 LI-TV until ’60 35,00E 69 19981020 Horn support bracket “Y” LI-TV 1961 12,00E 46 � 19081390 Stoplight switch 3 holes 150 LI-TV 8,00E 47 19281260 Stoplight switch 2 holes 125 LI 8,00E 48 19181390 Stoplight switch 1 hole 125 LI 8,00E 300 � 15080003 Headlamp bulb 25/25W x 6V All 2,00E 306 � 40010146 Torpedo festoon bulb 3W x 6V front light All 1,00E 307 � 15083004 Torpedo festoon bulb 3W x 6V rear light All until mid. '60 1,00E 303 � 15087002 Speedometer bulb 3W x 12V All 1,00E 308 � 19083014 Bulb 5/20W x 6V rear light 150 LI-TV '60/'61 1,50E 304 � 87570315 Bulb 3/15W x 6V rear light 125 LI '60/'61 1,50

ELECTRICAL-WIRING LOOMSE 110/D Wiring loom (stop 3 holes) 150 LI-TV 24,00E 115/B Wiring loom (stop 2 hole) 125 LI I prod. 20,00E 115/C Wiring loom (stop 1 hole) 125 LI II prod. 20,00E 112 15017070 Spark plug cap All 4,00E 112/B 15017070 Spark plug cap cable protection All 2,00E 114 19081045 Stop switch rubber All 3,00E 113 19081033 Rectangular regulator protection cap All 4,00E 321 � 15017040 Spark plug All 3,00E 402 19081400 Battery 6 volt 150 LI-TV 70,00E 410 19082130 Earth wire All 7,00


40


E 125 19017018 Grommet for flywheel cable All 1,00E 423 19081420 Battery tray complete with strap 150 LI-TV 45,00

ELECTRICAL-FLYWHEELE 146 811419 Contact points Filso All 12,00E 251 � 811356 Condenser Filso All 8,00E 182 840022 Contact points Ducati All 12,00E 183 � 840024 Condenser Ducati All 8,00E 184 860006 Contact points Dansi All 12,00E 251 � 860007 Condenser Dansi All 8,00E 141 00811384 H.T. coil original type All 92,00E 260 840082 H.T. coil adaptable (standard type) All 35,00E 452 � 19014030 Cylinder cowl All 40,00

HANDLEBARSL 22 19062024 Clutch-brake lever (each) All 10,00L 23 19062002 Lever pin with star washer All 4,00L 25 19062002 Lever pin (L 23) + 1 mm dia All 4,00L 26 19062019 Small plastic push rod All 0,80L 27 19062021 Spring for plastic push rod All 1,20L 24 19062022 Handlebar end round plastic bush All 20,00L 170 � 19062040 Gear handle All 40,00L 173 � 19063001 Alloy support for switch and front brake lever 125-150 LI 35,00


CABLES-VARIOUSL 105 86500300 Outer cable aluminium tie All 1,00L 108 Inner and outer cables kit “with nylon” All 30,00L 109 15065020 Front brake adjuster All 10,00L 110 19059050 Rear brake adjuster All 10,00L 111 19022015 Cable clutch-gear rubber shroud (each) All 8,00L 71 15059009 Outer stop (ferrule) for rear brake cable All 2,50L 84 15059013 Rear brake cable clamp All 4,00L 90 15059012 Pair plate to fix the rear brake cable All 5,00L 85 15059014 Pin for cabel clamp All 2,00L 113 19090018 Clutch/gear outer cables protect. tube All 0,50L 114 15017006 Triangular rubber for throttle cable & H.T. cable All 2,00L 115 15022008 Gear cable clamp short All 3,00L 116 19032003 Gear cable clamp long All 3,00L 117 19031003 Gear lever (balancer) on the engine All 22,00L 117/B 19021006 Clutch lever on engine All 8,00L 118 19032005 Tie rod for gear control All 4,00L 165 Complete Kit gear change in the engine All 48,00L 119 19032001 Gear-clutch adjuster 7 mm (each) All 2,50L 120 19032007 Tie rod protection rubber cap All 2,50




Alloy horncast for LI-TV lastseries.

Cylinder cowl.

Complete mechanism for gear control on the engine, all made inItaly.


C 443 C 440

L 165

L 64 85701035 Outer cable stop top hat (ferrule) All 2,00L 140 19222012 Spring clip for cable on the handlebar All 3,00L 141 19032024 Spring support for cables under choke All 5,00L 142 19090011 Cable clamp chrome on the front frame All 10,00L 144 19059006 Rear brake cable support All 4,00L 147 19015019 “L” tube for choke cable All 8,00L 151 19015050 Choke cable All 5,00

CARBURETTORB 26 15015020 Choke lever complete LI-TV 30,00B 27 � 412294 Carburettor new MA19BS5 (indian) 150 LI 60,00B 27/B Carburettor gasket kit All 3,50B 30 19016021 Air hose All 10,00B 31 19016120 Air filter short (wingnut screw fixing) All until Jan. '61 8,00B 32 19016270 Air filter long (spring fixing) All after Jan. '61 8,00B 24 19071020 Fuel tap All 14,00B 25 19071010 Fuel tap lever All 14,00B 30/B 19016036 Air hose bottom drip spout All 2,50B 41 19016037 Spring ring for fixing bottom drip spout All 3,00B 42 41016070 Valve bottom cup All 6,00B 37/B 19016042 Air intake/frame gasket All 2,50B 37/G 19016033 Air box/frame round gasket All 1,00B 37 19916057 Air box/inlet manifold oval gasket All after Jan. '61 2,50B 37/A 19016035 Air box/inlet manifold oval gasket All until Jan. '61 2,00B 21 412053 Protection cap for throttle cable All 2,00B 262 19016150 Clamp for air hose (lower) LI-TV 5,00B 264 19016160 Clamp for air hose (upper) LI-TV 5,00B 270 19016059/24 Tie rod + plate to fix the air filter All after Jan. ’61 8,00B 269 19016058 Double spring to fix the air filter All after Jan.'61 5,00B 271 19016028 Butterfly nut for air filter From ’61 4,00

SPEEDOMETERA 3/B � Speedometer 80 km/h 125 LI 50,00A 4/B � Speedometer 120 km/h TV 50,00A 5/B � Speedometer 100 km/h 150 LI 50,00A 6/B 611011 Speedometer glass All 4,00A 7 611038 Cable complete All 10,00A 8 � 611042 Speedometer drive (2 pcs.) All 10,00A 300 Speedo face 80 km/h 125 LI 10,00A 301 Speedo face 100 km/h 150 LI 10,00A 302 Speedo face 120 km/h TV 10,00A 320 00611015 Speedo light support All 6,00A 321 611066 Speedo gasket All 4,00A 324 611044 Speedo pinion support on the wheel (steel) All 12,00A 325 611033 Frame support speedometer All 6,00

Lambretta 150 LI IIIs first vers. 1962.

41

Lambretta 125-150 LI175 TV 3rd. Ser. / Special /150-200 SX125 LI 3rd. ser. produced from December 1961until November 1967 in 146.734 examples.150 LI 3rd. ser. produced from January 1962until May 1967 in 142.982 examples.175 TV 3rd. ser. produced from March 1962 untilOctober1965 in 37.749 examples.150 Special produced from September 1963until October 1966 in 69.529 examples.125 Special produced from October 1965 untilJanuary 1969 in 29.841 examples.150 SX produced from October 1966 untilJanuary 1969 in 31.238 examples.200 SX produced from January 1966 untilJanuary 1969 in 20.783 examples.

Frame numbers starting from:125 LI 3rd.ser n. 1.001from July ’63 n. 95.001from June ’67 n. 148.000150 LI 3rd.ser n. 600.001175TV 3rd.ser. n. 500.001150 Special n. 200.001125 Special n. 850.001150 SX n. 750.001200 SX n. 830.001

Identification particulars 125-150 LI 3rd.ser.First version 1962Narrow central bridge piece (120mm widthbetween the two sides), all rubber sidepanelbuffers.

Second version end 1962-mid. 1965Wider type central bridge piece (132mm widthbetween the two sides), rubber sidepanelbuffers held with metal spring clips (thesevariants available from mid.1964).

Third version from mid. 1965 until end ofproductionChrome-plated ring is eliminated betweenhandlebar and the legshield.

Last version production end (also appliesfor the 125LI)Rectangular horncasting badge, clip onsidepanels without aluminium handles,‘Lambretta Innocenti’ rear frame badge.

Lechler colour codes:Grey 8068 • New-White 8059 • New-light Blue8038 • Iseo-light Green 8035 • Nile-Green 8015Ruby-Red 8047 • Coral-Red 8065 • Beige notavailable.

Colour schemes 125LI 3rd.ser:All in the same Iseo-light Green colour or Greyor Beige (included clutch & front brake leverhandlebar supports).

Colour schemes 150LI 3rd.ser:All in the same New-White colour, except the sidepanels and the horn casting which are painted in:New-light Blue, Nile-Green, Coral-Red. On the first production machines, Grey wasalso used as the base colour.

Lambretta 125 LI 3rd.ser. first vers. 1962.

“Casa Lambretta”is quality: Chain adjuster:Made in Italy in steel with polizene autolube € 15.


LAMBRETTA 125-150 LI - 175 TV IIIs. / Special / 150-200 SX

M 142

42

Identification particulars 175TV 3rd.ser.:First version until end of 1963Sidepanels without flashes (as per LI models),all rubber sidepanel buffers. (this variant isvalid from mid. 1964).

Second version from end of 1963 until mid.1965Sidepanels with aluminium flashes (Specialtype), rubber sidepanel buffers held with metalspring clips (these variants available frommid.1964).

Third version from mid. 1965 until end ofproduction.Chrome plated ring is eliminated from betweenthe handlebar bottom and the legshields.

Lechler colour codes:New-White 8059 • Dark-Grey 8071 • Coral-Red 8065 • Light-Yellow 8064 • Metallic-Blue8062

Colour schemes 175TV 3rd.ser. first version:All in the same New-White colour.All in the same New-White colour, except thefront mudguard, the horncasting andsidepanels, that are painted in: light-Yellow,Coral-Red or Dark-Grey.The inside of the side panels and the rearmudguard (this last variant only on the earliestproduction machines) are painted in Blackanti-noise textured paint.

Colour schemes 175TV 3rd ser. second andthird version:All in the same Metallic-Blue, except thetoolbox, the airfilter box & elbow, the fuel tank,rear mudguard, the flywheel cover, the cylindercowl which are painted in New-White.

Valid for all versions:The seat frame and catch are painted glossBlack.The front shock absorbers are paintedaluminium FIAT 690.

Identification particulars 150 SPECIAL:First version up to mid. 1964All rubber sidepanel buffers.

Second version from mid. 1964 to mid. 1965Rubber sidepanel buffers held with metalspring clips, rear frame badge in relativeGolden or Silver colour (from April 1965).

Third version from mid. 1965 to end ofproductionChrome-plated ring is eliminated betweenhandlebar bottom and legshields.

Lechler colour codes:Metallic-Grey 8060Light-metallic Golden 8063

Colour schemes for both versions:All in the same Metallic-Grey or Metallic-Golden (only for the Golden) colour, except thetoolbox, the airfilter box & elbow, the fuel tank,

Lambretta 175 TV 3rd.ser. second vers. 1964.

Lambretta 175 TV 3rd.ser. first vers. 1962.

Lambretta 175 TV 3rd.ser. first vers. 1962.




43

rear mudguard, the flywheel cover, the cylindercowl which are painted in New-White. The seatframe and catch are painted gloss Black.

Identification particulars 125 SPECIAL:First version up to begin 1968Shield type horncasting badge, the metaltoolbox is painted.

Second version from begin 1968 to endproductionRectangular horncasting badge, plastic greytoolbox, clip on sidepanels without aluminiumhandles as per DL/GP type (only the very lastproduction machines).

Lechler colour codes:Metallic-Blue 8061

Color Scheme:All varnished with the same metallic light-blue,except for the pannier, the air filter box, the fueltank, the rear mudguard, the flywheel cover,the cylinder cap which are varnished with“New White” colour. The body of the seat andthe lock off hook are varnished with shinyblack. The pannier is plastic made and shouldbe left of its original colour in case you set itup. Just for the latest version the body-workcolour is Biancospino 8082 / hawthorn 8082.In the colour version green apple the wheelhubs and the rims are silver-grey 8081.

Identification particulars 150 SX:First version up to early 1968:Shield type horncasting badge, metal toolbox.

Second version from early 1968 untilAutumn 1968:Rectangular horncasting badge, plastic greytoolbox.

Final version:Clip on sidepanels without aluminium handles(as per DL/GP type).

Lechler colour codes:Primavera-Grey 8070 • Apple-Green 8039

Colour schemes:All in the same Primavera-Grey or Apple-Greencolour, except the toolbox, the airfilter box &elbow, the fuel tank, the rear mudguard, theflywheel cowl and the cylinder cowl which arepainted New-White. The seat frame and catchare painted gloss Black. Where fitted, theplastic toolbox must remain unpainted in itsnatural grey colour.Apple green color in the wheel hubs and rimsare gray metallic 8081.

Color Scheme latest version:All the same color Hawthorn 8082 dichlorinatedwheel rims and hubs Grey 8081. The seatframe and its locking hook is black.

Identification particulars 200 SX:First version until early 1968:Shield type horncasting badge, metal toolbox.

Lambretta 150 SX first vers. 1966.

Lambretta 200 SX first vers. 1966.

“Casa Lambretta” is honesty:

Fair prices for work with peace of mind:

E 64 switch with key € 40, E 65 light switch € 40,

M 215 rear wheel bearing € 35.

Manufactured in Italy exclusively for

Casa Lambretta!


L 24/BC 301 K T 45 K

44



ENGINEM 11 19712090 Piston 62 mm + oversizes TV 50,00M 9 19412150 Piston 52 mm + oversizes 125 LI-S 42,00M 10 19912200 Piston 57 mm + oversizes 150 LI-S-SX 45,00M 10/A 19912200 Piston 57 mm + oversize “ASSO” 150 LI-S-SX 80,00M 12 19612270 Piston 66 mm + oversizes 200 SX 54,00M 12/A 19612270 Piston 66 mm + oversize “ASSO” 200 SX 90,00M 30 Conrod complete kit TV 72,00M 31 Conrod complete kit 125-150LI-S-SX 72,00M 50 19212140 Crankshaft complete TV 150,00M 49 19912190 Crankshaft complete 125-150 LI-S-SX 150,00M 51 19612150 Crankshaft complete 200 SX 150,00M 74 � 19711020 Cylinder TV 100,00M 72 19411020 Cylinder 125 LI-S 100,00M 73 � 19511020 Cylinder 150 LI-S-SX 100,00M 75 � 19611020 Cylinder 200 SX 110,00M 95 19711015 Cylinder head TV 40,00M 93 19111015 Cylinder head 125 LI-S 38,00M 94 � 19911015 Cylinder head 150 LI 38,00M 96 � 42911002 Cylinder head 200 SX 40,00C 440 � 19214020 Cylinder cowl All 20,00M 114 Engine oilseal kit All 20,00M 128 19020050 Clutch plates (4 pcs.) Surflex All 30,00M 128/B 19020050 Clutch plates (4 pcs.) Surflex + springs All 38,00M 128/C 19020050 Clutch plates Surflex + updated springs 200 SX 38,00M 136 19020050/21 Complete clutch kit: cork disc, steel disc, spring (Surflex) All 60,00M 134 19021007 External clutch spring lever All 5,00M 235 19021002 Inside control lever clutch All 6,00M 236 19021001 Clutch push rod All 5,00M 283 � 19020080 Clutch housing All 25,00M 139 ✩ 19041130 Transmission chain All 25,00M 142 19041100 Upper chain guide All 15,00M 143 19041110 Lower chain guide All 20,00M 150 41031007 Sliding dog All 80,00M 248 19031008 Sliding dog spring All 2,00M 276 19031014 Pin for sliding dog M150 All 5,00M 155 19030015 Kick starter shaft All 12,00M 249 19030017 Start piston spring All 2,00M 158 19030031 Kick starter shaft inner piston and pin All until ’65 68,00M 158/B 19530502 Starting pin All from ’66 68,00M 234 19030025/26 Pair bronze bush for kick start shaft All 12,00M 169 19930029 Kick start lever chrome LI-TV-S-SX (no 200) 56,00M 170 � 19630029 Kick start lever chrome SX 200 60,00M 183 19030046 Kick start return spring All 8,00M 174 Engine gasket kit TV 18,00M 172 Engine gasket kit 125 LI-S 18,00M 173 Engine gasket kit 150 LI-S-SX 18,00M 175 Engine gasket kit 200 SX 20,00M 241 19010056 Gasket engine cover transmission All 4,00M 194 19918060 Silencer “Innocenti” All (no 150 SX) 85,00

M 194/B 19518510 Silencer “Innocenti” 150 SX 85,00M 195 19518010 Exhaust tube U bend All 30,00M 199 41018080 Exhaust tube U bend clamp All 8,00M 212 ✩ 19012034 Crankshaft needle bearing (NU205) All 50,00M 214 ✩ 19012031 Crankshaft bearing (6305) All 18,00M 208 ✩ 19030033 Gear cluster main bearing (6004) All 10,00M 215 19030050 Special rear axle bearing All 35,00M 230 19030020/35 Kit 4 needle cage for gear and clutch All 30,00M 239 19012130 Piston needle cage 16 mm All 8,00M 232 19010044 Bronze bush for shaft gear control All 5,00M 280 � 19010052 Flywheel flange alloy All 75,00

FRONT SUSPENSIONT 45 15060070 Lower buffer (bolt in type) All 5,00T 45/K 15060070 Kit 4 fork buffer + screws and washers LI-S-150 SX 23,00T 46/B 19760100 Upper buffer (bolt in type) TV-200 SX 5,00T 46/BK 19760100 Kit 4 fork buffer + screws and washers 175 TV-200 SX 23,00T 47/B 19060090 Push rod spring All 12,00T 51 20020048 Upper buffer (push in type) Late ’68 3,50T 52 20320048 Lower buffer (push in type) Late ’68 3,50T 47 19060021 Spring All 10,00T 48 19060014 Bush and pin fork link kit All 18,00T 49 19060017 Cup washer for fork link bush All 0,50T 49/B 19060030 Upper bush for spring (Nylon) All 3,00T 237 19060290 Front shock adsorber / 20 mm TV-SX200 48,00T 50 � 19060290 Front shock absorber Ø 25 mm TV-200 SX 32,00T 53 Cone kit for forks All until mid ’65 40,00T 53/B Cone kit for forks All after mid ’65 40,00T 35/B 15061060 Upper steering bearing All 3,00T 35/C 15060020 Lower steering bearing All 4,00T 232 19961022 Chrome ring under the handlebar All until mid ’65 46,00T 233 19960029 Lower steering disc protection All 4,00T 44 15061024 Lower steering bearing cover All 12,00

REAR SUSPENSIONT 102 19958100 Shock absorber complete “Casa Lambretta” All 72,00T 106 19010036 Engine bumpstop buffer All 3,00T 110 19010030 Engine silentblock 125-150 LI 18,00T 111 19710030 Engine silentblock TV S-SX All 22,00

WHEELSM 202 15044005 Front hub bearing (6201) All 8,00T 120 15044011 Front hub oilseal All 3,00T 123 15044028 Front speedometer drive oilseal All 3,00T 252 15044023 Brake return spring All 5,00T 254 15044044 Kit elastic washer,whaser and circ clip for brake shoes All 5,00T 253 15044006 Front axe spacer between two bearings All 5,00T 139 15044017 Front brake lever 125-150 LI-S-SX 12,00T 140 19059019 Rear brake lever All 10,00T 142 19945110 Rear brake drum All 90,00T 143 15044040 Pair of brake shoes All 25,00

Maintenance datas:Mixture 2% 125-150/4% 175TV-200SX spark plug 225-240 Bosch long reachMotor oil SAE 90 600 ccCarburettor (125LI) SH1/18 main jet 98 pilot jet 42 slide 1Carburettor (150LI) SH1/18 main jet 105 pilot jet 45 slide 1Carburettor (150 S) SH1/18 main jet 101 pilot jet 45 slide 1Carburettor (175TV) SH1/20 main jet 106 pilot jet 50 slide 1Carburettor (200SX) SH1/20 main jet 103 pilot jet 48 slide 1Carburettor (125 S) SH1/20 main jet 107 pilot jet 45 slide 2Carburettor (150SX) SH1/20 main jet 102 pilot jet 45 slide 1Ignition advance 22°/24° deg. BTDC 32-33 mm on the flywheel circumference

Second version from early 1968 untilAutumn 1968:Rectangular horncasting badge, plastic greytoolbox.

Third (final) version from Autumn 1968 untilend of production:Polished horngrille, chrome-plated flash on thefront mudguard. (as per 150SX).Clip on sidepanels without aluminium handles(this last variant applies only for the very lastproduction machines).

Lechler colour codes:New-White 8059

Colour schemes:All in the same colour, except for the frontshock-absorbers which are painted aluminiumFIAT 690.

The seat frame and catch are painted glossBlack.Where fitted, the plastic toolbox must remainunpainted in its natural grey colour.




45



T 145 19744200 Pair of disc pads TV-200 SX 20,00T 141 19744064 Round cover “J” for disc hub brake arm TV-200 SX 10,00T 141/B Disc hub window (white) TV-200 SX 2,50T 147 19044034 Wheelrims All 34,00T 178 ✩ 15044036 Tyre 3.50 x 10 Michelin S 83 All 45,00T 180 15044036 Tyre 3.50 x 10 Sava whitewall All 54,00T 183 19044037 Tube 3.50 x 10 Michelin All 15,00

STANDT 216 19957030 Stand All 30,00T 213 Pair rubber stand feet & pins black All 10,00T 218 19957005 Spring All 6,00T 215/B ✩ 19957040 Splashplate with clamps All 30,00

BODYWORK PLASTICS & RUBBERSC 86 Kick start rubber black All 4,00C 82 Brake pedal rubber grey All 3,00C 64 15070019 Square tank buffer with split All 2,00C 92 19950021 Tank support buffer All 2,00C 96 19950073 Tank support buffer (long type) From ’67 2,00C 65 15055059 Pair of side panel rubber beading All 6,00C 90/B 19950065 Side panel buffer (square type) 125-150-LI-TV '62-'63 2,50C 90 19950065 Side panel buffer (round type for spring) All from mid. '64 2,00C 18 15071002 Grommet for fuel tap control lever All 1,00C 71 15050059 Pair of bridge piece rubbers All early prod. ‘62 4,00C 95 19950073 Pair of bridge piece rubbers All from '63 onwards 4,00C 75 19950062 Pair of legshield beadings All 6,00C 97 19950300 Footboard plastic runner kit (6 pcs.) All 24,00C 98 19950093 Floor channel rubber strips (4 pcs.) All 8,00C 99 19950046 Pair of horncasting beadings All 4,00C 100 19950049 Horncasting/mudguard rubber All 5,00C 101 19950044 Pair of mudguard/legshield rubbers (grey) 125-150 LI 8,00C 102 19750044 Pair of mudguard/legshield rubbers TV-S-SX 8,00C 103 19990002 Rear rubber mudflap All 5,00C 89/B 19955380 Plastic catch for sidepanel handle (inside) All from '65 4,00C 73/K 15050052 Kit 22 pcs. antivibration rubber washer All 8,00C 73 15050052 Legshield antivibration rubber washer All 0,40C 69 15041024 Kick start round engine sidecasting buffer All 2,00C 50/B 19955094 Grommet for rear frame hole All 1,00C 94 15070021 Petrol tank cap rubber gasket All 1,00C 91 19955038 Toolbox door buffer (upper) All 1,00C 91/B 19955037 Toolbox door buffer (lower) All 1,00C 93 19970018 Petrol tank cap drip tray and felt All 8,00C 74/B 19086018 Toolbox rubber beading All 4,00C 411 19750043 Fiberglass front mudguard TV & early S-SX 90,00C 91/C 65000100 Small rubber bung for flywheel cover All 0,80

LOCKSC 135 19055060 Toolbox lock All 24,00C 136 19988010 Steering lock All 18,00B 120 19988001 Kit screw, spring, pin, cover for steering lock All 8,00

BADGESC 157 15050160 Legshield badge “Lambretta” 125 LI/ 150 LI-S/ TV 10,00C 178 19650170 Legshield badge “Lambretta” 125 S/ 150-200 SX 12,00C 165 19955051 Panel badge “Lambretta” All 10,00C 158 19150200 Legshield badge “125 LI” 125 LI 8,00C 159 19050200 Legshield badge “150 LI” 150 LI 8,00C 160 15050200 Legshield badge “175 TV” TV 8,00C 160/C 19650200 Legshield badge “200 TV” TV 8,00C 177 19650190 Legshield badge “X 200” 200 SX 8,00C 176 19550520 Legshield badge “X 150” 150 SX 8,00C 175 19450190 Legshield badge “125” 125 S 8,00C 174 19550150 Legshield badge “Special” S-SX 12,00C 173 19550160 Legshield badge “Golden” 150 S Golden 8,00C 172 19550170 Legshield badge “Silver” 150 S Silver 8,00C 162 19250071 Front plastic shield badge “Innocenti” All until ’67 12,00C 162/B 19950069 Spring clip for fixing front badge “Innocenti” For C162 6,00

C 182 19550509 Front square shield badge “innocenti” 125-150-200 SX ’68 10,00C 182/A Spring clip for fixing front badge “Innocenti” For C182 5,00C 166 19955072 Rear frame badge “150 LI” 150 LI 10,00C 167 19855072 Rear frame badge “125 LI” 125 LI 10,00C 168 19755072 Rear frame badge “175 TV” 175 TV 10,00C 168/B 19755078 Rear frame badge “175 TV” 175 TV as for Special 10,00C 169 19555072 Rear frame badge “Special” 150 S Silver 10,00C 170 19555072 Rear frame badge “Special” 150 S Golden 10,00C 171 19955093 Rear frame badge “Innocenti” 125 S 150-200 SX 9,00C 171/B 19955072 Rear frame badge “200 TV” 200 TV 10,00C 179 19755076 Set of sidepanel flashes (4 pcs.) TVS - S - SX 40,00C 180 19655076 Pair of sidepanel “arrow” flashes 200 SX 50,00C 181 19550540 Chrome front mudguard flash 150 SX late 200SX 24,00C 218 19190005 “Running In” sticker 125-150 LI 2,00C 219 19790001 “Running In” sticker TV-200 SX 2,00C 224 19090023 Air filter sticker All 1,50C 225 “RIV” sticker for shock absorber All 1,50C 222 Green petrol sticker for petrol flap All until '67 2,00C 226 Red petrol sticker for petrol flap All from '68 1,50C 227 “Ducati” sticker for H.T. coil All 1,50C 223 “Battery” instruction sticker 175 TV-200 SX 2,00

BODYWORK METALLIC PARTSC 412 � 19550060 Front mudguard in steel S-SX 90,00

C 461 � 19950060 Front mudguard 125-150 LI 95,00C 302 19955064 Panel handle lefthand (screw type) All until ’65 8,00C 303 19955063 Panel handle righthand (screw type) All until ’65 8,00C 302/B 19955310 Inner panel mechanism lefthand (roller type) All until ’65 14,00C 303/B 19955320 Inner panel mechanism righthand (roller type) All until ’65 14,00C 298 ✩ 19950091 Alloy floor channel kit (4 pcs.) All 20,00C 299 19950087 Legshield beading lower endcap All 3,00C 300 19950064 Legshield beading upper endcap All 3,00C 301 19950094 Floor channel endcap All 1,00C 301/K 19950094 Kit 8 floor channel end caps + screws All 12,00C 304 19950083 Horncasting horngrille 125-150 LI 20,00C 305 19750083 Horncasting horngrille TV-S-SX 20,00C 306 19955010 Rear frame badge holder All 20,00C 316 19955081/83 Kit spring and plates to fix the panels All until ’68 18,00C 317 20130104/3 Kit 2 springs and plate to fix the panel Last prod. without hooks 18,00C 318 19955350/60 Kit 2 alloy panel lever + plastic hooks All from ’66 35,00

L 174/B � 19959010 Brake pedal (chrome) All 35,00C 295/B 19059017 Brake pedal return spring All 6,00C 239 20074002 Brake pedal bush All 3,00C 296 � 19070040 Petrol cap All 6,00C 296/B 19950115 Flat spring for panel buffer All from mid. '64 2,00C 297 19070011 Complete petrol tank strap All 12,00C 433 � 19950053 Passenger footrest right side All 50,00C 434 � 19950054 Passenger footrest left side All 50,00

C 444 � 19950086 Alloy horncast with grill 125-150 LI 100,00C 435 19750086 Pressed alloy horncast TV-S-SX 100,00C 383 � 19970010 Tank All 60,00C 436 � 15050057 Bottom legshield bridge All until ‘62 20,00C 437 � 19950072 Bottom legshield bridge All from ’63 20,00C 451 � 19955100 Righthand side panel 125-150 LI-TV I° vers. 120,00C 450 � 19955090 Lefthand side panel 125-150 LI-TV I° vers. 120,00109 C 453 � 19755190 Righthand side panel TV 2° vers. -S-SX 120,00110 C 452 � 19755180 Lefthand side panel TV 2° vers.- S-SX 120,00111 C 455 � 19655190 Righthand side panel SX 200 120,00112 C 454 � 19655180 Lefthand side panel SX 200 120,00C 462 � 19761020 Handlebar cover alloy 125-150 S-SX-175TV 80,00

SEATSC 345 19555150 Dual seat cover blue TV-125 S 80,00C 346 19555140 Dual seat cover green 150 S Golden 80,00C 347 Dual seat cover black 150 S - SX 80,00C 348 19655150 Dual seat cover red 200 SX 80,00C 349 Dual seat frame (without cover) S - SX 160,00C 342 Front/rear seat cover (each) black 125-150 LI 45,00



C 343 Front seat complete (frame + cover) 125-150 LI 130,00C 344 Front seat complete (frame + cover) 125-150 LI 130,00C 295 Single seat main spring 125-150 LI 12,00C 361 19055290 Passenger seat strap round type 125-150 LI 24,00C 359 15055170 Passenger seat strap for dual seat blue TV 18,00C 357 15055170 Passenger seat strap for dual seat black S - SX 18,00C 358 15055170 Passenger seat strap for dual seat red 200 SX 18,00C 358/B 15055170 Passenger seat strap for dual seat green Golden 18,00C 372 Rectangular long seat buffer TV-S-SX 4,00C 373 Hook with plate to fix the seat lock TV-S-SX 15,00C 374 Plastic buttom for seat lock TV-S-SX 3,00

ELECTRICAL-SWITCHESE 55 19980090 Chrome headlamp rim 125-150 LI 30,00E 56 19980100 Headlamp reflector with bulbholder 125-150 LI 28,00E 58 19780009 Kit spring+screw+nut to fix E 59 TV-S-SX 6,00E 40/B 19980008 Headlamp glass gasket 125-150 LI 4,00E 42 19980009 Headlamp glass 125-150 LI 18,00E 57 19780020 Chrome headlamp rim TV-S-SX 25,00E 59 19780030 Headlamp reflector/glass unit TV-S-SX 42,00E 50 19083180 Rear light lense CEV All 8,00E 51 19983009 Rear light white gasket (Cev-Aprilia) All 3,00E 52 19983060 Rear reflector/bulb holder (Cev-Aprilia) All (CEV-Aprilia) 20,00E 62 19983021 Rear light housing/frame gasket grey All 4,00E 60 19983010 Rear light complete All 60,00E 61/B 19983100 Rear light lense Aprilia All 12,00E 61 19983001 Rear light lense Carello All 12,00E 51/B 19983004 Rear light red gasket for Carello All 4,00E 63 � 19981050 Engine cut out button 125-150 LI 8,00E 65 19081360 Light switch 125-150 LI 40,00E 49 19281230 Headlamp/horn switch white TV-S-SX 30,00E 72 19281230 Headlamp/horn switch black S-SX last prod. 30,00E 64 19781070 Ignition switch with keys TV-S-SX 40,00E 66 19581500 Horn A.C. 125 LI-S-SX 30,00E 66/B 19681500 Horn D.C. TV-200 SX 35,00E 69 19981020 Horn support bracket “Y” All 12,00E 46 � 19081390 Stoplight switch 3 holes 150 LI-TV ’62 8,00E 47 19981400 Stoplight switch 2 holes All from ’63 8,00E 48 19181390 Stoplight switch 1 hole 125 LI ’62 8,00E 300 � 87652525 Headlamp bulb 25/25W x 6V All 2,00E 301 � 87550500 Torpedo festoon bulb 6V x 5V All 1,00E 303 � 87520300 Speedometer bulb 3W x 12V All 1,00E 304 � 87570315 Rear light bulb 3/15W x 6V All 1,50

ELECTRICAL-WIRING LOOMSE 110/D Wiring loom (3 wire stoplight) D.C. TV-150 LI ‘62 24,00E 115 Electrical loom (2 wire stoplight) D.C. 175TV-200SX 20,00E 115/B Electrical loom (2 wire stoplight) A.C. Non battery models 20,00E 115/C Electrical loom (1 wire stoplight) A.C. 125 LI ’62 20,00E 112 15017070 Spark plug cap All 4,00E 112/B 19017016 Spark plug cap cable protection All 2,00E 112/C 19917023 Frame strut grommet for spark plug cable All 2,00E 114 19981046 Stoplight switch rubber cover All 3,00E 113 19081033 Rectangular regulator protection rubber Battery models 4,00E 116 20062002 Round injection box protection rubber Non battery 3,00E 116/B � 20062030 Round junction box Non battery models 6,00E 120 Rectangular junction box protection Non battery models 5,00E 2 19781001 Round cable protection for E 64 TV-S-SX 3,00E 321 � 15017040 Spark plug All 3,00E 402 19981030 Black battery 6 Volt TV-SX 200 70,00E 404 19981010 Complete battery strap 150 LI ‘62-TV-200 20,00E 410 19082130 Earth wire All 7,00E 125 19017018 Grommet for stator wiring All 1,00

ELECTRICAL-FLYWHEELE 145 811440 Contact points Filso 4 pole All '62 12,00E 251 811356 Condenser Filso 4 pole All ’62 8,00E 182 840072 Contact points Ducati 4 pole All '62 12,00


E 183 840049 Condenser Ducati 4 pole All '62 8,00E 184 860016 Contact points Dansi 4 pole All '62 12,00E 251 860007 Condenser Dansi 4 pole All fom '62 8,00E 150 840059 Contact points 6 pole Ducati-Filso-Dansi All from '63 12,00E 151 840060 Condenser 6 pole Ducati-Filso-Dansi All from '63 8,00E 260 840082 H.T. adaptable type coil All 35,00B 185 19917092 Kit screws and spacer for round coil All from 1965 5,00E 315 00840069 Alloy flywheel dustcover all All after '62 12,00E 316 00840070 Spring for dustcover All after '62 5,00E 452 � 19014030 Cylinder cowl All 40,00

HANDLEBARSL 28/B 19962023 Clutch/brake lever (each) All 10,00L 23 19062002 Lever pin with star washer All 4,00L 25 19062002 Lever pin (L 23) extra size 1 mm All 4,00L 26 19062019 Lever anti vibration cap All 0,80L 27 19062021 Lever anti vibration spring All 1,20L 24/B 19962022 Handlebar end round plastic bush All until ’65 20,00L 24/C 19962022 Kit 10 pcs. handlebar plastic bush All from ’66 24,00L 171 � 19962020 Gear handle (for brass wheel) Until mid ’66 40,00L 172 � 19962040 Gear handle (for nylon wheel) From mid ’66 40,00L 174 � 19963001 Alloy support for switch and front brake lever 125-150 LI 35,00L 175 � 19763001 Alloy support for switch and front brake lever TV-S-SX 35,00

GRIPSL 52 19962016 Pair of grips grey All 8,00

CABLES-VARIOUSL 105 86500300 Aluminium cable tie All 1,00L 108 Inner & outer cables complete kit “with nylon” All 30,00L 109 15065020 Front brake adjuster All 10,00L 110 19059050 Rear brake adjuster All 10,00L 111 19022015 Cable clutch-gear rubber shroud (each) All 8,00L 84 15059013 Rear brake cable clamp All 4,00L 85 15059014 Pin for cable clamp All 2,00L 90 15059012 Pair plate to fix the rear brake cable All 5,00L 165 Complete mechanism for gear control All 55,00L 113 19090018 Protection tube for clutch/gear Outer cables All 0,50L 114 15017006 Triangular rubber for throttle cable & H.T. Cable All 2,00L 115 15022008 Gear/clutch cable short trunnion All 3,00L 116 19032003 Gear cable long trunnion All 3,00L 117 19031003 Gear lever (balancer) on the engine All 22,00L 117/B 19021006 Clutch lever on engine All 8,00L 118 19032005 Tie rod for gear control All 4,00L 118/B 19031016 Gear lever in the engine All 20,00L 119 19032001 Gear-clutch adjuster 7 mm (each) All 2,50L 120 19032007 Tie rod protection rubber cap All 2,50L 140 19222012 Spring clip for cable on the handlebar All 3,00L 141 19032024 Spring support for cables under choke All first prod. ’62 5,00L 142 19990011 Cable clamp chrome on the front frame All 10,00L 144 19059006 Rear brake cable support All 4,00L 145 19982005 Alloy plate to fix the electrical cable on the handlebar All 1,50L 64 85701035 Outer stop (ferrule) All 2,00L 71 15059009 Outer stop (ferrule) for rear brake cable All 2,50L 101 � 19960031 Front brake outer cable fork guide All 4,00L 147 19015019 “L” tube for choke cable All 8,00L 151 19015050 Choke cable All 5,00L 160 19932025 Choke plate for cable All 4,00

CARBURETTORB 35/B Carburettor gasket set (with needle valve) All 6,00B 33 19916022 Air hose All 10,00B 32 19016270 Air filter All 8,00B 24 19971030 Fuel tap All 14,00B 40/B 19971050 Fuel tap lever All 14,00B 30/C 19916036 Air hose bottom cup All 2,50B 41 19016037 Spring ring for fixing bottom cup All 3,00B 42 41016070 Valve bottom cup All 6,00

46 Want to know about the history of the Lambretta? Buy the book “Innocenti Lambretta” of 296 pages written by Vittorio Tessera.



47



B 37/C 19916042 Air intake/frame gasket All 2,50B 37/E 19916051 Air box/frame round gasket All 1,00B 37 19916057 Air box/inlet manifold oval gasket All 2,50B 21 412053 Protection cap throttle cable All 2,00B 253 19711004 Intake manifold All (no 200 SX) 20,00B 264 19916150 Clamp for air hose (upper) All 5,00B 263 19916160 Clamp for air hose (lower) All 5,00B 265 19915020 Choke lever complete All 30,00B 270 19016059/24 Tie rod + plate to fix the air filter All 8,00B 269 19016058 Double spring to fix the air filter All 5,00

SPEEDOMETERA 9 � Speedometer 80 km/h 125 LI 50,00A 10 � Speedometer 120 km/h TV-SX 50,00


All panels now in stock: LI, Special, SX200.

Front horncast alloy with grill 125-150 LI.

Handlebar lever support. Handlebar cover special.

Legshield bridge, 2 model.

BODY PARTS

Front mudguard LI-Special. Passenger footrest all model.

C 451 C 453 C 454

C 444 C 437 C 436

L 171

L 172

L 175 C 462L 174

C 461 C 412

C 433-C 434

A 11 � Speedometer 100 km/h 150 LI-S-125 S 50,00A 12 � 00611074 Speedometer 140 km/h 200 SX 50,00A 14 611065 Speedometer glass All 4,00A 7 611038 Cable complete square 2 mm LI-TV ’62 10,00A 15 611068 Cable complete square 2,5 mm All from ’63 10,00A 8 � 611058 Speedometer drives (2 pcs.) All 10,00A 303 Speedo face 80 km/h 125 LI 10,00A 304 Speedo face 100 km/h 150 LI-125 S 10,00A 305 Speedo faces 120 Km/h TV-S-SX 10,00A 306 Speedo faces 140 Km/h 200 SX 10,00A 320 00611015 Speedo light support All 6,00A 321 611066 Speedo gasket All 4,00A 324 611044 Speedo pinion support on the wheel (steel) All 12,00

Lambretta 125-150-200 DL125DL produced from January 1969 until April1971 in 15.300 examples.150DL produced from January 1969 until April1971 in 20.048 examples.200DL produced from January 1969 until April1971 in 9.350 examples.

Identification particulars 125-150-200 DL:First version up to mid. 1970Horngrille and rear frame grille made of castaluminium, metal petrol flap.Second version from mid. 1970 to end ofproduction:Horngrille, rear frame grille and petrol flap inplastic.

Lechler colour codes:Turquoise 8016 • Biancospino Off White 8082 Yellow Ochre 8080 • Red 8073.

Colour schemes 125DL:All in the same Biancospino Off White colour.All in the same Turquoise colour, except theairfilter box & elbow, the fuel tank, the rearmudguard, the flywheel cowl, the cylinder cowlwhich are painted in Biancospino Off White.

Colour schemes 150DL:All in the same Biancospino Off White colour.All in the same Red colour, except the airfilterbox & elbow, the fuel tank, the rear mudguard,the flywheel cowl, the cylinder cowl which arepainted in Biancospino Off White.

Colour schemes 200DL:All in the same Yellow Ochre colour, except theairfilter box & elbow, the fuel tank, the rearmudguard, the flywheel cowl, the cylinder cowlwhich are painted in Biancospino Off White.

VALID FOR ALL CYLINDER CAPACITIES:The wheel hubs, the wheelrims, the centrestand & splashplate, the front forks are paintedin Aluminium FIAT 690. Only on the very last200DL’s these parts are painted in non metallic

Lambretta 125 DL first version 1968. Lambretta 200 DL first version 1968

Lambretta 200 DL electronic ignition 1970.


FRONT and REAR DL Series BADGES

They are made in chrome-plated ABS, and are

identical to the originals in dimension, material

and finish.

48 It’s better to send orders with “Casa Lambretta” codes via fax.


LAMBRETTA 125-150-200 DL



ENGINEM 9 19412150 Piston 52 mm + oversizes 125 42,00M 10 19912200 Piston 57 mm + oversizes 150 45,00M 10/A 19912200 Piston 57 mm + oversizes “ASSO” 150 80,00M 12 19612270 Piston 66 mm + oversizes 200 54,00M 12/A 19612270 Piston 66 mm + oversizes “ASSO” 200 90,00M 31 Conrod complete kit 125-150 72,00M 34 Conrod complete kit 200 72,00M 52 22012190 Crankshaft complete 125-150 150,00M 53 22212150 Crankshaft complete 200 150,00M 72 19411020 Cylinder 125 100,00M 73 � 19511510 Cylinder 150 100,00M 75 � 19611020 Cylinder 200 110,00M 93 19411015 Cylinder head 125 38,00M 94 � 19911015 Cylinder head 150 38,00M 96 � 42911002 Cylinder head 200 40,00C 440 � 19214020 Cylinder cowl All 20,00M 114 Engine oilseal kit All 20,00M 128 19020050 Clutch plates (4 pcs.) Surflex All 30,00M 128/B 19020050 Clutch plates (4 pcs.) Surflex + springs 125-150 38,00M 128/C 19020050 Clutch plates Surflex + uprated springs 200 38,00M 136 19020050/21 Complete clutch kit: cork disc, steel disc, spring (Surflex) All 60,00M 134 19021007 External clutch spring lever All 5,00M 238 22021001 Clutch brass push rod All 8,00M 283 � 19020080 Clutch housing All 25,00M 282 � 22020120 Clutch flange All 15,00M 140 ✩ 22241130 Transmission chain 200 25,00M 139 ✩ 19041130 Transmission chain 125-150 25,00M 142 19041100 Upper chain guide All 15,00M 143 19041110 Lower chain guide All 20,00M 150 41031007 Sliding dog All 80,00M 248 19031008 Sliding dog spring All 2,00M 276 19031014 Pin for sliding dog M150 All 5,00M 158/B 19530502 Kick starter shaft All 68,00M 234 19030025/26 Pair bronze bush for kick start shaft All 12,00M 155 19030015 Kick start shaft piston and pin All 12,00M 249 19030017 Start piston spring All 2,00M 169 19930029 Kick starter lever chrome All 56,00M 183 19030046 Kick start return spring All 8,00M 172 Engine gasket kit 125 18,00M 173 Engine gasket kit 150 18,00M 175 Engine gasket kit 200 20,00M 241 19010056 Gasket engine cover transmission All 4,00M 194/B 19518510 Silencer “Innocenti” All 85,00M 195 19518010 Exhaust tube U bend All 30,00M 199 41018080 Exhaust tube U bend clamp All 8,00M 212 ✩ 19012034 Crankshaft needle bearing (NU205) 125-150 50,00M 214 ✩ 19012031 Crankshaft bearing (6305) All 18,00M 208 ✩ 19030033 Gear cluster main bearing (6004) All 10,00M 215 19030050 Special rear axle bearing All 35,00M 213 ✩ 19012034 Crankshaft needle bearing (NU2205) 200 55,00M 237 19030020/35 Kit 2 needle cage + bush for gear/clutch All 25,00M 239 19012130 Piston needle cage 16 mm All 8,00M 232 19010044 Bronze bush for shaft gear control All 5,00M 280 � 19010052 Flywheel flange alloy All 75,00

FRONT SUSPENSIONT 47/C 19560100 Push rod spring All 8,00T 61 20020046 Big ball for push rod All 2,00T 51 20020048 Upper fork link buffer All 3,50T 52 20320048 Lower fork link buffer All 3,50T 47 19060021 Spring All 10,00T 48 19060014 Complete fork link pin & bush kit All 18,00T 49 19060017 Cup washer for fork link bush All 0,50

T 49/C 19560026 Nylon washer upper for spring All 3,00T 237 19959010 Front shock adsorber / 20 mm 200 48,00T 50 � 19060290 Front shock absorber Ø 25 mm 200 32,00T 53/B Cone kit for forks All 40,00T 35/B 15061060 Upper steering bearing All 3,00T 35/C 15060020 Lower steering bearing All 4,00T 233 19960029 Lower steering disc protection All 4,00T 44 15061024 Lower steering bearing cover All 12,00

REAR SUSPENSIONT 102 19958100 Shock absorber complete “Casa Lambretta” All 72,00T 106 19010036 Engine bumpstop buffer All 3,00T 111 19710030 Engine silent block All 22,00

WHEELSM 202 ✩ 15044005 Front hub bearing (6201) All 8,00T 120 15044011 Front hub oilseal (bearing) All 3,00T 123 15044028 Speedometer drive oilseal All 3,00T 252 15044023 Brake return spring All 5,00T 253 15044006 Front axe spacer between two bearings All 5,00T 139 15044017 Front brake lever 125-150 12,00T 140 19059019 Rear brake lever All 10,00T 142 19545140 Rear brake drum All 90,00T 144 22044040 Pair of brake shoes All 25,00T 145 19744200 Pair of disc pad 200 20,00T 141 19744064 Round cover “J” cap for disc hub lever 200 10,00T 141/B Disc hub window (white) 200 2,50T 147 19044034 Wheelrims All 34,00T 178 ✩ 15044036 Tyre 3.50 x 10 Michelin S 83 All 45,00T 180 15044036 Tyre 3.50 x 10 Sava whitewall All 54,00T 183 19044037 Tube 3.50 x 10 Michelin All 15,00

STANDT 216 19957030 Stand All 30,00T 213 Pair of rubber stand feet and pins black All 10,00T 218 19957005 Spring All 6,00T 215/B ✩ 19957040 Splashplate with clamps All 30,00

BODYWORK PLASTICS & RUBBERSC 86 Kick start rubber black All 4,00C 114 Brake pedal rubber black All 3,00C 64 15070019 Square tank buffer with split All 2,00C 92/C 19550024 Tank support buffer All 2,00C 30 22055059 Pair of sidepanel rubber beadings All 6,00C 90 19950065 Side panel buffer (round type for spring) All 2,00C 18 15071002 Grommet for fuel tap control lever All 1,00C 108 22050073 Pair of bridge piece rubbers All 5,00C 109 22050062 Pair of legshield rubber beadings All 8,00C 106 22050290 Rear footboard plastic runners kit (6 pcs.) All 24,00C 107 22050111 Floor channel rubber inserts kit (4 pcs.) All 10,00C 110 22050047 Pair of horncasting beadings All 4,00C 111 22050049 Horncasting - mudguard rubber All 5,00C 112 22050045 Pair of mudguard-legshield rubbers All 8,00C 113 19990002 Rubber rear mudflap All 5,00C 73/K 15050052 Kit 22 pcs. antivibration rubber washer All 8,00C 73 15050052 Rubber legshield antivibration washer All 0,40C 69 15041024 Kick start round buffer for engine side All 2,00C 105 19955094 Grommet for rear frame hole All 1,00C 94 15070021 Petrol cap rubber gasket All 1,00C 91 19955038 Toolbox door buffer (upper) All 1,00C 91/B 19955037 Toolbox door buffer (lower) All 1,00C 91/C 65000100 Round grommet for flywheel cowl All 0,80C 93 19970018 Petrol cap driptray & felt ring All 8,00C 74/B 19586504 Toolbox rubber beading All 4,00C 311 22055098 Rear plastic grill All 20,00

grey. The seat frame & catch and the horngrilleare gloss Black. Where fitted, plastic front &rear grilles and the petrol flap must remainunpainted in their natural colour. The sameapplies for the plastic toolbox fitted to all DL/GP models throughout production.

Maintenance data:

Mixture 2% 125-150 / 4% 200 spark plug 225-240 Bosch long reachMotor oil SAE 90 600 ccCarburettor (125) SH2/20 main jet 98 pilot jet 45 slide 2Carburettor (150) SH2/22 main jet 118 pilot jet 45 slide 2Carburettor (200) SH2/22 main jet 118 pilot jet 45 slide 1Ignition advance 20°-22° deg. BTDC 2,20-2,66 mm BTDC

49Cannot find some items in the catalogue? To order them use the number of the figure and the table drawings on the original Innocenti catalogue.

50 List of screws, nuts and accessories in the back of the catalog



C 320 Petrol cap door in plastic Last prod. operation 15,00

LOCKSC 135 22055060 Toolbox lock All 24,00C 136 19988010 Steering lock All 18,00B 120 19988001 Kit screw, spring, pin, cover for steering lock All 8,00

BADGESC 183 22050502 Legshield badge “Lambretta” All 12,00C 185 22150503 Legshield badge “125 DL” 125 8,00C 185/B 22150504 Legshield badge “125 Grand Prix” 125 GP 12,00C 184 22050503 Legshield badge “150 DL” 150 8,00C 184/B 22050504 Legshield badge “150 Grand Prix” 150 GP 12,00C 186 22250503 Legshield badge “200 DL” 200 8,00C 186/B 22250504 Legshield badge “200 Grand Prix” 200 GP 12,00C 187 20934021 Horncover oval emblem “i” All 6,00C 188 22055093 Rear frame badge “Innocenti” All 7,00C 189 22050501 Sticker black spot 125-150-200 DL 4,00C 214 22250507 Legshield “Electronic” sticker 200 DL Electronic 5,00C 190 22055075 Pair of sidepanel stripe stickers All 20,00C 191 22055077 Pair of sidepanel plastic grilles All 14,00C 224 19090023 Air filter sticker All 1,50C 226 Red petrol flap sticker All 1,50C 227 “Ducati” sticker for H.T. coil All 1,50

BODYWORK METALLIC PARTSC 298 ✩ 19950091 Alloy floor channel kit (4 pcs.) All 20,00C 425 � 22050060 Steel front mudguard All 70,00C 430 � 22055084 Righthand side panel All 110,00C 431 � 22055085 Lefhand side panel All 110,00C 432 � 22050110 Legshield All 120,00C 433 � 22050053 Righthand rear footboard All 50,00C 434 � 22050054 Lefthand rear footboard All 50,00C 309 22050089 Pair of legshield “sharks teeth” endcaps All 8,00C 300 19950064 Legshield beading upper endcap All 3,00C 308 22050094 Floor channel endcap All 1,00C 308/K 22050094 Kit 8 floor channel end caps + screws All 12,00C 317 201030104/3 Kit 2 springs and plate to fix the panel All 18,00C 295/B 19059017 Brake pedal return spring All 6,00C 239 20074002 Brake pedal bush All 3,00C 296 � 19070040 Petrol cap All 6,00C 296/B 19950115 Petrol cap All 2,00C 297 19070011 Complete tank strap All 12,00C 310 � 22050083 Horncasting horn grill All 14,00C 383 � 19970010 Tank All 60,00C 437 � 19950072 Bottom legshield bridge All 20,00C 445 � 22050086 Alloy hornast without grill All 60,00

SEATSC 315 Dual seat cover black All 90,00C 350 22055140 Dual seat frame (without cover) All 180,00C 357 15055170 Passenger seat strap black All 18,00C 372 Rectangular long seat buffer All 4,00C 373 Hook with plate to fix the seat lock All 15,00C 374 Plastic buttom for seat lock All 3,00

ELECTRICAL-SWITCHESE 58 19780009 Kit spring+screw+nut to fix E 68 All 6,00E 67 22080001 Chrome headlamp rim All 30,00E 68 � 22080030 Headlamp reflector with glass All 35,00E 71 22083040 Rear light lense CEV All 12,00E 70 22083020 Rear light complete All 40,00E 72 19281230 Headlamp/horn switch black All 30,00E 64 19781070 Ignition switch with keys All 40,00E 66 19581500 Horn A.C. All 30,00E 66/B 19681500 Horn D.C. 200 with battery 35,00E 69 19981020 Horn support bracket “Y” All 12,00E 47 19981400 Stoplight switch 2 holes All 8,00E 300 � 87652525 Headlight bulb 25/25W x 6V All 2,00E 301 � 87550500 Torpedo festoon bulb 6V x 5W All 1,00E 303 � 87520300 Speedometer bulb 3W x 1 V All 1,00E 304 � 87570315 Rear light 3/15W x 6V All 1,50

ELECTRICAL-WIRING LOOMSE 117/B Wiring loom electronic type 200 electronic 20,00

E 117/C Wiring loom (2 wire stoplight) D.C. 200 DL with batt. 20,00E 117 Wiring loom (2 wire stoplight) A.C. All 20,00E 112 15017070 Spark plug cap All 4,00E 112/B 19017016 Spark plug cap cable protection All 2,00E 112/C 19017023 Frame strut grommet forspark plug cable All 2,00E 114 19981046 Stoplight switch rubber All 3,00E 118 20062002 Round junction box rubber cover All 3,00E 2 19781001 Round cable protection for E 64 All 3,00E 116/B 20062030 Round junction box All 6,00E 410 19082130 Earth wire All 7,00E 321 � 15017040 Spark plug All 3,00E 113 19081033 Regulator protection cap 200 with battery 3,00E 402 19981030 6 volt battery 200 with battery 70,00E 125 19017018 Grommet for stator wiring All 1,00E 422 Electronic coil rubber protection DL electronic 20,00

ELECTRICAL-FLYWHEELE 150 840183 Contact points 6 pole All 12,00E 151 840060 Condenser 6 pole All 8,00E 260 840082 H.T. coil adaptable All 35,00B 185 19917092 Kit screws and spacer to fix the external coil All 5,00E 315 00840069 Flywheel dustcover All 12,00E 316 008440070 Spring for dustcover All 5,00

HANDLEBARSL 28/B 19962023 Clutch-brake lever (each) All 10,00L 28 19962023 Ball end lever (each) All late prod. 10,00L 23 19062002 Lever pin with star washer All 4,00L 25 19062002 Lever pin (L 23) + 1 mm dia All 4,00L 26 19062019 Lever anti vibration cap All 0,80L 27 19062021 Lever anti vibration spring All 1,20L 24/C 19962022 Kit 10 pcs. handlebar plastic bush All 24,00L 172 � 19962040 Gear handle All 40,00L 175 � 19763001 Alloy support for switch and front brake lever All 35,00

GRIPSL 53 22062016 Pair of grips black All 8,00

CABLES-VARIOUSL 105 86500300 Aluminium cable tie All 1,00L 123 Inner & outer cables kit with nylon All 30,00L 109/B 15065020 Front brake adjuster All 10,00L 110/B 19059050 Rear brake adjuster All 10,00L 111 19022015 Clutch/gear cable rubber shroud (each) All 8,00L 84 15059013 Rear brake cable clamp All 4,00L 90 15059012 Pair plate to fix the rear brake cable All 5,00L 85 15059014 Pin for cabel clamp All 2,00L 113/B 19090018 Protection tube for clutch/gear outer cables All 0,50L 114 15017006 Triangular rubber for throttle cable & H.T. cable All 2,00L 115 15022008 Triangular rubber for throttle cable & H.T. cable All 3,00L 116 19032003 Gear cable long trunnion All 3,00L 117 19031003 Gear lever (balancer) on the engine All 22,00L 117/B 19021006 Clutch lever on engine All 8,00L 165 Complete mechanism for gear control All 55,00L 118 19032005 Tie rod for gear control All 4,00L 119 19032001 Gear-clutch adjuster 7 mm (each) All 2,50L 120 19032007 Tie rod protection rubber cap All 2,50L 64 85701035 Outer cable stop top hat (ferrule) 125-150 2,00L 71 15059009 Outer stop (ferrule) for rear brake cable All 2,50L 101 � 19960031 Front brake outer cable fork guide All 4,00L 140 19222012 Spring clip for cable on the handlebar All 3,00L 143 19990011 Cable clamp chrome on the front frame All 10,00L 144 19059006 Rear brake cable support All 4,00L 145 19982005 Alloy plate to fix the electrical cable on the handlebar All 1,50L 152 19015050 Choke cable All 5,00L 160 19932025 Choke plate for cable All 4,00

CARBURETTORB 36/B � 412485 Carburettor SH 2/22 Jetex 150-200 60,00B 35/B Carburettor gasket kit (with needle valve) All 6,00B 38 22116021 Air hose 125 10,00B 39 22016021 Air hose 150-200 10,00B 32 19016270 Air filter All 8,00B 24 22071040 Fuel tap All 14,00B 40 22071050 Fuel tap lever All 8,00


LAMBRETTA 125-150-200 DL

51



B 37/D 19916042 Air scoop/frame gasket All 2,50B 37/E 19916051 Airbox/frame round gasket All 1,00B 37 19916057 Airbox/inlet manifold oval gasket All 2,50B 21 412053 Protection cap throttle cable All 2,00B 253 19411004 Intake manifold 125 20,00B 254 22011004 Intake manifold 150 20,00B 255 22211004 Intake manifold 200 20,00B 263 19916160 Clamp for air hose (lower) 125 5,00B 264 19916150 Clamp for air hose (upper/lower) All 5,00B 266 � 19915020 Cold start to the frame All 15,00B 270 19016059/24 Tie rod + plate to fix the air filter All 8,00B 269 19016058 Double spring to fix the air filter All 5,00


SPEEDOMETERA 9/B � Speedometer 100 km/h 125 50,00A 10/B � Speedometer 120 km/h 150 50,00A 11/B � Speedometer 140 km/h 200 50,00A 14 611065 Speedometer glass All 4,00A 16 611125 Speedo cable complete All 10,00A 8 � 611058 Speedometer drive (2 pcs.) All 10,00A 310 Speedo face 100 km/h 125 10,00A 311 Speedo face 120 km/h 150 10,00A 312 Speedo face 140 Km/h 200 10,00A 320 00611015 Speedo light support All 6,00A 322 611066 Speedo gasket All 4,00A 324 611044 Speedo pinion support on the wheel (steel) All 12,00A 326 19987001 Frame support speedometer All 5,00

Tank.Legshield bridge.

C 433 - C 434

C 431 C 425

C 440

C 437C 383

Front mudguard.Left side panel.

Cylinder cowl.Passenger footrest all model.

BODY PARTS


52

Lambretta 50-100-125Junior (‘J’ Range)50 De Luxe - 50 Special 50 JUNIOR (‘J50’) produced from October1964 until January 1968 in 69.988 examples.100 JUNIOR (‘Cento’) produced from March1964 until November 1965 in 17.642 examples.125 JUNIOR 3m. (‘J125’) produced fromSeptember 1964 until September 1966 in21.651 examples.125 JUNIOR 4m. (‘Starstream’) produced fromMay 1966 until April 1969 in 16.052 examples.50 DE LUXE produced from January 1968 untilOctober 1970 in 28.852 examples.50 SPECIAL produced from April 1970 untilApril 1971 in 13.599 examples.

From frame number:50 JUNIOR n. 400.001100 JUNIOR n. 000.001

Identification particulars 50 JUNIOR (J50):First version up to August 1966Frame with wide legshields, supplementarysupport plate for the rear seat, 9 inch. wheels,bolt in front fork buffers (only valid for firstproduction models - thereafter fitted with pushin fork buffers).On the last of the first version models, there isa cast rear ‘number plate’ support withhorizontal ribbing (as per the new ’66 model).

Second version (mod. ’66) from August 1966until January 1968Frame with narrower legshields, nosupplementary cast support plate for the rearseat (one piece frame), 9 inch. wheels.On the last production models of the secondversions the sidepanels no longer havehandles (as per the DeLuxe-Special series).

Lechler colour codes:New-White 8059 • Acquamarina light-Blue8030 • Olive light-Green not available • Olivedark-Green 8078 • Apple-Green 8039

Colour schemes:First version all in the same New-White colour.All in the same Olive dark-Green colour, exceptthe sidepanels painted in Olive light-Green.The seat frame & catch are painted GlossBlack.

Lambretta 50 Junior 1964.

Lambretta 50 Junior 1966.

Lambretta 50 De Luxe 1968.


The new kit for 75cc Junior 50 € 190.

LAMBRETTA 50-100-125 Junior - 50 De Luxe - 50 Special

53

Colour schemes:Second version (mod. ’66)All in the same New-White or Acquamarinalight-Blue colour.The seat frame & catch are painted GlossBlack.

Colour schemes:Second version (mod. ’66) last production:All in the same New-White, Acquamarina light-Blue or Apple-Green colour, except the hubs, thewheelrims, the flywheel cowl and the cylindercowl which are painted Aluminium FIAT 690.The seat frame & catch are painted Gloss Black.

DETAILS IDENTIFICATION 100 JUNIOR:There are no major changes during production.

LECHLER color System:Light ivory 8054.

Color Scheme:Ivory all the same except for the seat frameand the locking plate painted black.

Identification particulars 125 JUNIOR 3m.(J125).First version (first month production):Round steering lock as per J100 models, boltin fork buffers.Second version (following production)Rectangular steering lock, push in fork buffers.

Lechler colour codes:Metallic Grey 8060 • Metallic light-Blue 8062

Colour schemes:All in the same metallic Grey or metallic light-Blue colour, except the seat frame & catchwhich are painted Gloss Black.

Identification particulars 125 JUNIOR 4m.(‘Starstream’):No modifications in the production.

Lechler colour codes:Light-Blue not available • New-White 8059

Colour schemes:All in the same light-Blue or New-White colour,

Lambretta 100 Junior 1964. Lambretta 50 Special 1970.

Lambretta 125 Junior 3m first version 1964.

Lambretta 125 Junior 4m 1966.


54



ENGINEM 13 20151140 Piston 38 mm + oversizes 50 34,00M 14 20051020 Piston 51 mm + oversizes 100 45,00M 15 20251008 Piston 57 mm + oversizes 125 45,00M 35 Conrod complete kit 50 50,00M 36 Conrod complete kit 100-125 3m. 45,00M 37 Conrod complete kit 125 4m. 45,00M 55 20151010 Complete crankshaft 50 180,00M 77 20151220 Cylinder rebuilt 50 90,00M 78 20051060 Cylinder 100 100,00M 97 20151013 Cylinder head 50 30,00M 98 20051013 Cylinder head 100 on requestM 99 20251013 Cylinder head 125 on requestM 116 Engine oilseal kit 50 12,00M 117 Engine oilseal kit 100-125 3m. 14,00M 118 Engine oilseal kit 125 4 m. 16,00M 130 20052050 Clutch plates (2 pcs.) Surflex 50 from ’66 20,00M 131 20052024 Clutch plates (3 pcs.) Surflex J 50 Is.-100-125 30,00M 141 ✩ 20052039 Transmission chain All 20,00M 144 20052010 Kit chain guide upper and lower All 24,00M 151 � 20053011 Sliding dog 50-100-125 3m. 50,00M 152 20353011 Sliding dog 125 4m. 80,00M 159 20054001 Kick start shaft All 65,00C 51 20054005 Kick start buffer All 4,00M 183/B 20054006 Kick start lever return spring All 8,00M 176 Engine gasket kit 50 24,00M 178 Engine gasket kit 100 24,00M 179 Engine gasket kit 125 24,00M 242 20050004 Engine cover gasket All 4,00M 196/A 20155100 Silencer “Innocenti” 50 80,00M 197 20055280 Silencer “Innocenti” 100-125 110,00M 217 ✩ 20050015 Caged bearing for crankshaft (left) 125-50 late prod. 50,00M 218 ✩ 20050015 Crankshaft bearing left 50-100-125 first pr 14,00M 209 ✩ 20350013 Crankshaft bearing right 125 4m. 36,00M 219 ✩ 42044003 Crankshaft bearing right 50-100-125 3m. 14,00M 203 ✩ 15020017 Gear cluster bearing All 9,00

M 216 20050038 Special bearing for rear axle All 35,00M 231 Kit 3 needle cage gear and clutch All 25,00M 240 20151070 Piston needle cage 50 8,00M 239 19012130 Piston needle cage 100-125 8,00

FRONT SUSPENSIONT 59 20020070 Upper bolt in fork buffer “with screw” All 1st prod. 5,00T 60 20020060 Lower bolt in fork buffer “with screw” All 1st prod. 5,00T 52 20320048 Upper push in fork buffer All 2nd prod. 3,50T 51 20020048 Lower push in fork buffer All 2nd prod. 3,50T 63 20020014 Spring All 8,00T 64 20020017 Fork link bush and pin kit All 18,00T 65 Cone kit for forks All 40,00T 234 20020005 Rubber protection for lower steering bearing All 4,00

REAR SUSPENSIONT 103 20031050 Shock absorber All 60,00T 112 20335050 Engine silentblock All late prod. 40,00

WHEELSM 202 15044005 Front hub bearing (6201) All 8,00T 120 15044011 Front hub oil seal All 3,00T 150 20157020 Rear brake drum 50 85,00T 151 20057020 Rear brake drum 100-125-50DL/S 85,00T 152 20121040 Pair of brake shoes 50 25,00T 153 20021040 Pair of brake shoes 100-125 25,00T 154 20121060 Wheelrims 9 inch. 50 until '67 40,00T 155 20021060 Wheelrims 10 inch. 50 DL-S 100-125 40,00T 184 20121024 Tyre 2.75 x 9 Michelin ACS 50 until '67 40,00T 185 20121023 Tube 2.75 x 9 Michelin 50 until '67 15,00T 186 ✩ 20021024 Tyre 3.00 x 10 Michelin S 83 50 DL-S 100-125 40,00T 183 19044037 Tyre 3.00 x 10 Michelin 50 DL-S 100-125 15,00

STANDST 219 20132110 Stand All 38,00T 224 20032020 Pair of rubber stand feet and pins 50-50 DL-100-125 10,00T 225 20932020 Pair of rubber stand feet and pins 50 S 8,00

except the seat frame & catch which arepainted Gloss Black.

Identification particulars 50 DE LUXENo modifications in the production.10 inchwheels fitted throughout production.

Lechler colour codes:Acquamarina light-Blue 8030 • Apple-Green8039 • New-White 8059

Colour schemes:All in the same Acquamarina light-Blue orApple-Green or New-White colour, except thehubs, the wheelrims, the flywheel cowl and thecylinder cowl which are painted Aluminium FIAT690.The seat frame & catch are painted GlossBlack.

Identification particulars 50 SPECIAL:No modifications in the production. 10 inchwheels fitted throughout production.

Lechler colour codes:Turquoise 8016 • Red 8073 • Yellow Ochre8080

Colour schemes:All in the same Turquoise or Red or Ochrecolour, except the hubs, the wheelrims, theforks, the centre stand, the flywheel cowl andthe cylinder cowl which are painted AluminiumFIAT 690.The seat frame & catch are painted GlossBlack.

Maintenance datas:Mixture 2% spark plug 225-240 Bosch long reachMotor oil SAE 90 360 gr.Carburettor (50) SHB18/12 main jet 62 pilot jet 40 slide 1Carburettor (100-125) SHB18/16 main jet 70 pilot jet 40 slide 1Carburettor (125 4m) SHB18/16 main jet 72 pilot jet 40 slide 1Ignition advance (50) 20°-22° Deg. BTDC 1,6-2mm BTDCIgnition advance (100-125) 23°-25° Deg. BTDC 2,4-2,8 mm BTDC



LAMBRETTA 50-100-125 Junior - 50 De Luxe - 50 Special

55



T 221 20332015 Pair of stand brackets All 12,00T 222 20032005 Spring All 5,00T 223 20032014 Antivibration spring All 8,00

BODYWORK PLASTICS & RUBBERSC 121 20054011 Kick start rubber All 5,00C 82 15059003 Brake pedal rubbre grey 50-50 DL-100-125 3,00C 114 22059003 Brake pedal rubber black 50 S 3,00C 116 20030041 Pair of sidepanel rubber beadings 50-50 DL- 100-125 6,00C 116/N 20430041 Pair of sidepanel rubber beadings 50 S 6,00C 18 15071002 Grommet for fuel tap control lever All 1,00C 115 20034024 Legshield rubber beading grey 50-50 DL-100-125 6,00C 115/N Legshield rubber beading black Only 50 special 6,00C 122 20434035 Floor channel rubber inserts kit (4 pcs.) 50 DL 10,00C 117 20030058 Mudguard rubber beading grey 50-50 DL-100-125 6,00C 117/N 20030058 Mudguard rubber beading black 50 S 6,00C 68 20181002 Rear seat support rubber beading J 50 '64 - mid '66 8,00C 119 20430085 Grommet for rear frame hole black 50 S 1,00C 118 20030085 Grommet for rear frame hole grey 50-50 DL-100-125 1,00C 94 15070021 Petrol filler cap round rubber gasket All 1,00C 120 20034003 Floor channel plastic runners (4 pcs.) All (except 50 DL-S) 30,00C 120/B 20034017 Floor channel plastic runner (7 pcs.) 100-125 60,00A 52 Floor rubber mat back 50 Special 50,00C 312 20030039 Nylon bush frame for panel pin 50 De Luxe - Special 3,00

LOCKSC 137 � 20094050 Seering lock (square type) 50-125 20,00

BADGESC 192 20134009 Legshield badge “Lambretta J 50” 50 until '67 12,00C 193 20034009 Legshield badge “Lambretta 100” 100 12,00C 178 19650170 Legshield badge “Lambretta” 50 DL 12,00C 183 22050502 Legshield badge “Lambretta” 50 Special 12,00C 193/B 20034022 Legshield badge “Cento” 100 18,00C 194 20234009 Legshield badge “Lambretta J 125” 125 3m. 12,00C 195 20334009 Legshield badge “Lambretta 125” 125 4m. 12,00C 196 20134012 Rear frame badge “J 50” 50 to '67 12,00C 197 20034011 Legshield badge “Innocenti” 50-100-125 3m. 8,00C 215 20434011 Legshield badge “Innocenti” 50 DL-125 4m. 8,00C 187 20934021 Legshield oval emblem “i” 50 Special 6,00C 198 20434038 Legshield badge “50” 50 DL 8,00C 199 20434013 Legshield badge “50” 50 S 8,00C 200 20434012 Side panel badge “De Luxe” 50 DL 12,00C 201 20434013 Side panel badge “Special” 50 S 12,00C 202 20430114 Pair of alloy sidepanel flashes 50 DL 38,00C 203 20430116 Pair of alloy sidepanel flashes 50 S 38,00C 224 19090023 Air filter sticker All 1,50C 226 Red sticker for filler cap. All late prod. 1,50C 227 “Ducati” sticker for H.T. coil All 1,50C 228 “Running in” sticker 50 J-DL-Special 2,00

BODYWORK METALLIC PARTSC 313 ✩ 20434032 Alloy floor channel kit (4 pcs.) 50 DL 20,00C 300 20034013 Legshield rubber beading endcap 50-50 DL-100-125 3,00C 301 19950103 Floor channel endcap 50 DL 1,00C 314 20074013 Floor channel endcap All 5,00C 296 � 19070040 Filler cap All 6,00C 239 20074002 Brake pedal bush All 3,00C 302 19955064 Left panel handle (with screw) All until’ 67 8,00C 303 19955063 Right panel handel (with screw) All until ’67 8,00C 442 20030150 Internal panel hook with white wheel (left) All until ’67 14,00C 441 20030160 Internal panel hook with white wheel (right) All until ’67 14,00C 316 19955081/83 Kit spring and plates to fix the panels All until ’67 18,00

C 317 20130104/3 Kit 2 springs and plate to fix the panels 50J last prod.-DL-S 18,00C 369 19950094 Kit 8 floor channel end caps - screws 50 DL 14,00C 366 � 20495003 Rear rack steel pressed 50 DL 70,00

SEATSC 352 20182010 Long seat cover black 50 until '65 80,00C 352/B 20082010 Long seat cover black 100-125 3m 80,00C 353 20182030 Long seat cover blue 50 '66-'67 80,00C 353/B 20480010 Long seat cover blue 50 DL 80,00C 353/C 20480030 Long seat cover black and brown 50 S 80,00C 353/D 20382010 Long seat cover blue 125 4m. 80,00C 357 20082020 Long passenger seat strap black 50 until '65 100-125 18,00C 359 20382020 Long passenger seat strap blue 124 4m. 18,00C 365 20480010 Seat frame (without cover) 50 DL 120,00C 375 ✩ 20182030 Seat frame (without cover) J 50 '66-'67 120,00C 376 20280030 Seat frame with cover (black and brown) 50 Special 200,00

ELECTRICAL-SWITCHESE 79 20160001 Headlamp chrome rim 50-100-125 3m 30,00E 80 21160004 Headlamp reflector with bulbholder 50 15,00E 7 20160002 Headlamp glass 50-100-125 3m 18,00E 5 20160003 Headlamp glass gasket All 3,00E 81 � 20162010 Light switch 50 30,00E 82 20163070 Rear light lense with bulbholder 50 14,00E 82/B 20163004 Rear light lense gasket 50 3,00E 98/B Rear lighthousing/frame gasket 50 mod ’66 8,00E 98 20163011 Rear lighthousing/frame gasket 100-125-50 ’65 5,00E 99 20463021 Rear lighthousing/frame gasket 50 S 5,00E 99/A 20463021 Rear lighthouse/frame gasket 50 DL 5,00E 96 20161010 Horn All 36,00E 96/B 20061001 Horn gasket grey 50-50 DL-100-125 3,00E 96/C 20061001 Horn gasket black 50 S 3,00E 83 20060001 Headlamp chrome rim 125 4m 40,00E 84 20060003 Headlamp reflector with bulbholder 125 4m 28,00E 84/B 20060003 Headlamp reflector with bulbholder 100-125 3m 25,00E 85 20060002 Headlamp glass 125 4m 20,00E 86 20063002 Rear light glass 100-125 15,00E 86/B 20063020 Rear light complete 100-125 52,00E 87 � 20062010 Light switch 100-125 40,00E 88 20062020 Stoplight switch 100-125 10,00E 300 � 87652525 Headlamp bulb 25/25W x 6V 100-125 2,00E 301 � 87550500 Torpedo festoon bulb 6V x 5W 100-125 1,00E 304 � 87570315 Bulb 3/15W x 6V rear light 100-125 1,50E 309 � 87551500 Torpedo festoon bulb 6V x 15W 50 1,00E 310 � 87691500 Headlamp bulb 6V x 15W 50 2,00E 307 � 87550300 Torpedo festoon bulb 6V x 3W 50 1,00

ELECTRICAL-WIRING LOOMSE 121 Wiring loom 100-125 24,00E 122 Wiring loom 50 20,00E 112 15017070 Spark plug cap All 4,00E 114 19981046 Stoplight switch rubber 100-125 3,00E 116 20062002 Round junction box rubber 100-125 3,00E 116/B � 20062030 Round junction box 100-125 6,00E 119 20065002 Spark plug cap protection All 3,00E 112/B 19017016 Spark plug cap cable protection All 2,00E 321 � 15017040 Spark plug All 3,00E 125 19017018 Grommet for stator wiring All 1,00

ELECTRICAL-FLYWHEELE 150 840059 Contact points All 12,00E 151 840091 Condenser 100-125 8,00E 153 860027 Condenser 50 6,00


56



E 260 860032 H.T. coil adaptable All 35,00

HANDLEBARSL 29 20011006 Clutch-brake lever (each) All 10,00L 31 71480012 Lever pin All 3,00L 26 19062019 Lever anti vibration capA All 0,80L 27 19062021 Lever anti vibration spring All 1,20

GRIPSL 54 20011001 Pair of grips grey 50-50 DL-100-125 8,00L 54/B 20011001 Pair of grips black 50 S 12,00

CABLES-VARIOUSL 124 Inner and outer cables complete kit Grey 50-50 DL-100-125 28,00L 125 Inner and outer cables complete kit Black 50 S 28,00L 128 20070004 Clutch/gear cable shroud (each) All 2,00L 133 20052035 Gear/clutch cable trunnion short All 4,00L 132 20053021 Gear cable trunnion long All 4,00L 137 20052038 Gear/clutch adjuster 6 mm (each) All 2,50L 134 20053018 Tie rod for gear control 50-100-125 3m. 3,00L 138 20353018 Gear tie rod 125 4m 3,00L 130 20090006 Front brake cable seal All 4,00L 131 Rear frame grommet for outer cables All 4,00

Want to know about the history of the Lambretta? Buy the book “Innocenti Lambretta” of 296 pages written by Vittorio Tessera.

L 112 20074007 Rear brake cable shroud All 3,00

CARBURETTORB 43 20058030 Fuel tap All 12,00B 44 � 20055004 Air hose All 8,00B 45 20055019 Air filter All 8,00B 43/C 20058040 Fuel tap lever alloy All (no 50 Special) 12,00B 43/B 20058040 Fuel tap lever plastic black 50 special 10,00L 153 20058090 Choke cable All 5,00B 266 � 19915020 Choke lever complete plastic black 50 Special 15,00B 265 19915020 Choke lever complete alloy All (no 50 Special) 30,00B 267 20055060 Air hose clamp (round little) All 5,00B 268 20055020 Air hose clamp (oval big) All 5,00

SPEEDOMETERA 17 � 611088 Speedometer 100 km/h 125/50 40,00A 17/C 611080 Speedometer glass All 4,00A 18 611083 Speedo cable complete All 10,00A 31/B � 611084 Speedometer drive (2 pcs.) 100-125 10,00A 31/C � 611085 Speedometer drive (2 pcs.) 50 10,00A 26 20090003 Speedometer plastic cover with “J” J 50-DL-Special 10,00A 324 611044 Speedo pinion support on the wheel (steel) All 12,00A 327 20090001 Frame support speedometer All 4,00



Sliding dog for J 124 4 speedand Vega, made in Italy!

Rear shock adsorber. Complete seat for 50 Special.

Floormat grey for Junior series, made in Italyin genuine rubber.

Complete kit for your 50 DL: seat and rear rack.

M 152 T 103 C 376

A 46/B

C 353/B - C 365 - C 366

57

Lambretta Lui 50 C-CL / 75 S-SL50 LUI C-CL produced from March 1968 until June 1969 in 27.812examples.75 LUI S-SL produced from August 1968 until December 1970 in 9.402examples (2067 SL).

From Frame number:50 LUI C-CL n. 575.00175 LUI S-SL n. 650.001

Identification particulars 50 LUI C-CL:First version up to begin 1969:Lambretta badge on the left side of the legshields with 50c or 50clbadge, non ball ended handlebar levers.

Second version from beginning of 1969 until end of production:The Lambretta badge is no longer on the left side of the legshields, LUIbadge in the centre of the legshields and, for all examples, a smallLambretta badge under the oval J emblem. Ball ended handlebar levers.

Lechler colour codes:Orange 8037 • Apple-Green 8039 • Turquoise8016 • Biancospino Off White 8082 • Aluminium(engine side casing) 8081

Colour schemes 50 C:All in the same Biancospino colour, except thewheelrims, the centre stand, the hubs, the rearbrake pedal, the crankcase engine side casingthat are painted in Aluminium colour 8081.The seat frame is painted Gloss Black. Thecylinder cowl is painted matt-Black.

Colour schemes 50 CL:All in the same Orange or Apple-Green orTurquoise colour, except the wheelrims, thehubs, the centre stand, the rear brake pedal andthe crankcase engine side casing and the

handlebars which are painted in Aluminiumcolour 8081. The seat frame is painted GlossBlack. The cylinder cowl is painted matt-Black.

Identification particulars 75 LUI S-SL:First version until beginning of 1969:Non ball ended handlebar levers. Secondversion from beginning of 1969 until end of

Lambretta Lui 50 CL first series 1968. Lambretta Lui 50 C 1968.

Lambretta Lui 75s first series 1968.

Lambretta Lui 75 SL first series 1968.


LUI 50 CL REAR TAIL LIGHT

It is made in exactly the same material, in

dimension and shape as the original.

It is sold complete with it’s fixing bracket and

rubber gasket for the bodywork.


LAMBRETTA Lui 50 C-CL / 75 S-SL

58



ENGINEM 13 20151140 Piston 38 mm + oversizes 50 34,00M 16 20851140 Piston 46,4 mm + oversizes 75 40,00M 35 Conrod complete kit 50 50,00M 35/B Conrod complete kit 75 58,00M 55 20151010 Complete crankshaft 50 180,00M 58 20851010 Crankshaft complete Vega-Cometa 180,00M 77 20951220 Recon. cylinder 50 90,00M 97 20151013 Cylinder head 50 30,00M 116 Engine oilseal kit 50 12,00M 119 Engine oilseal kit 75 15,00M 130 20052050 Clutch plates (2 pcs.) Surflex 50 20,00M 131 20052024 Clutch plates (3 pcs.) Surflex 75 30,00M 141 ✩ 20052039 Transmission chain 50 20,00M 141/B ✩ 20152039 Transmission chain 75 20,00M 144 20052010 Kit chain guide upper and lower 50 24,00M 151 � 20053011 Sliding dog 50 50,00M 152 20353011 Sliding dog 75 80,00M 159 20354014 Kick start shaft All 65,00M 183/B 20054006 Kick start return spring All 8,00C 51 20054005 Kick start buffer All 4,00M 176 Engine gasket kit 50 24,00M 180 Engine gasket kit 75 24,00M 242 20050004 Engine cover gasket All 4,00M 196/B 20955100 Silencer “Innocenti” 50 80,00M 217 20050015 Caged bearing for crankshaft (left) All 50,00M 209 ✩ 20350013 Crankshaft bearing right 75 36,00M 219 ✩ 42044003 Crankshaft bearing right 50 14,00M 203 ✩ 15020017 Gear cluster bearing All 9,00M 216 20050038 Special bearing for rear axe All 35,00M 240 20151070 Piston needle cage All 8,00

FRONT SUSPENSIONT 69 20920026 Upper buffer All 3,00T 68 21060017 Lower buffer All 3,00T 66 20920009 Spring All 8,00T 67 20920024 Fork link bush and pin kit All 12,00T 236 Steering cone Kit with ball race All 40,00T 235 21061014 Upper/lower steering bearing (each.) All 4,00

REAR SUSPENSIONT 105 20931020 Shock absorber All 78,00

WHEELSM 202 ✩ 15044005 Front hub bearing (6201) All 8,00T 120 20921005 Front hub oilseal All 3,00T 158 20957040 Pair of brake shoes front All 25,00T 159 20921040 Pair of brake shoes rear All 25,00T 160 20921060 Wheelrims All 50,00

T 186 ✩ 20021024 Tyre 3.00 x 10 Michelin S83 All 40,00T 183/B 19044037 Tube 3.00 x 10 Michelin All 15,00

STANDT 226 20932010 Stand All 40,00T 225 20932020 Pair of rubber stand feet All 8,00T 228 20932005 Pair of stand brackets All 8,00T 227 20932006 Spring All 5,00

BODYWORK PLASTICS & RUBBERSC 124 20954011 Kick start rubber All 5,00C 125 20974002 Brake pedal rubber All 5,00C 123 20934002 Rear plastic mudflap 50 6,00C 105/B 20934003 Grommet for rear frame hole All 1,00C 126 20958030 Filler cap All 8,00C 127 20934001 Pair of inner legshield channel beadings All 6,00A 47 20934007 Pair of floormats All 35,00C 127/B 20934008 Bung for fixing floormats All 1,00C 125/B 20930039 Rubber cap for rear shock pin (left) All 3,00C 140 20958012 Tank rubber gasket beading All 15,00C 141 20930042/31 Pair rubber gasket for central tunnel All 12,00C 142 20993010/08 Tool plastic bowl with strap All 15,00C 104 20974007 Brake pedal buffer All 2,00C 87 20920028 Rubber gasket bottom front fork All 8,00C 88 20930041 Rubber between rear shock and frame All 6,00

LOCKSC 138 � 20994010 Steering lock All 20,00

BADGESC 204 20934020 Legshield badge “Lambretta” 50 1st prod. 10,00C 204/B 20934080 Legshield badge “Lambretta” 75-50 late prod. 10,00C 205 20934030 Legshield badge “50 C” 50 C 8,00C 206 20934040 Legshield badge “50 CL” 50 CL 8,00C 207 20834030 Legshield badge “75 S” 75 S 8,00C 208 20834040 Legshield badge “75 SL” 75 SL 8,00C 209 20934013 Legshield badge “Lui” 75-50 late prod. 5,00C 187 20934009 Front chrome emblem “J” All 6,00C 211 20934012 Rear frame badge “Innocenti” All 8,00C 212 20858033 Pair of “Lubematic” stickers 75 SL 10,00C 226 Red sticker for filler cap All 1,50C 229 20934015 Emblem “Luna” Luna 10,00C 229/B 20834016 Emblem “Vega” Vega 10,00C 229/C 20834017 Emblem “Cometa” Cometa 10,00C 216 20910006 Rear headlamp finisher chrome (rectangular) All 20,00

BODY METALC 104/B 20974013 Return spring for rear brake pedal All 4,00C 379 ✩ 20995010 Rear rack press steel All 90,00C 390 ✩ 20863050 Rear number plate/light support 75 80,00


production: ball ended handlebar levers.

Lechler colour codes:Metal-Grey 8060 • Yellow Ochre 8080 •Alluminium (engine side casing) 8081

Colour schemes 75 S-SL: All in the same Metal-Grey or Ochre colour,except the wheelrims, the hubs, the centrestand, the rear brake pedal which are paintedAluminium FIAT 690.The crankcase engine side casing and the

handlebars are painted Aluminium colour8081.The seat frame is painted Gloss Black. The

cylinder cowl, the numberplate support, therear tail light body and the two silencer grillesare painted matt-Black.

Maintenance datas:

Mixture 2% spark plug 225 Bosch long reachMotor oil SAE 90 450 gr. (50) - 620 gr. (75)Carburettor (50) SHA14/12 main jet 52Carburettor (75) SH1/20 main jet 68 pilot jet 45 slide 1Ignition advance 20°-22° Deg. BTDC 1,65-2,01 mm BTDC


59

LAMBRETTA Lui 50 C-CL / 75 S-SL



SEATSC 354 20980010 Seat cover with padding 50 60,00C 355 20882010 Seat cover with padding 75 70,00C 357 20882020 Passenger seat strap for dual seat 75 15,00C 364 Round rubber pad to the seat All 3,00C 377 ✩ 20882010 Long seat complete (frame and cover) 75 160,00C 378 ✩ 20980010 Short seat complete (frame and cover) 50 160,00

ELECTRICAL-SWITCHESE 89 20960002 Headlamp chrome rim 50 CL 40,00E 90 20960040 Headlamp reflector with bulbholder 50 CL in prep.E 90/B 20960003 Headlamp green “spy” gem All 2,00E 91 20962010 Light switch 50 CL 40,00E 91/B 20963040 Rear light complete 50 CL 40,00E 91/C Red lense for rear light. 50 CL 7,00E 92 20860002 Headlamp chrome rim 75 40,00E 94 20862010 Light switch 75 40,00E 95 20862020 Stoplight switch 75 10,00E 95/B 20862003 Protection rubber for stop switchp 75 4,00E 300 � 87552525 Headlamp bulb 25/25W x 6V 75 2,00E 301 � 87550500 Torpedo festoon bulb 6V x 5W 75 1,00E 304 � 87570315 Rear light bulb 3/15W x 6V 75 1,50E 309 � 87551500 Torpedo festoon bulb 6V x 15W 50 1,00E 310 � 87691500 Headlamp bulb 6V x 15W 50 2,00E 307 � 87550300 Torpedo festoon bulb 6V x 3W 50 1,00E 93/B 20863030 Rear light complete 75 55,00E 93/C 20863040 Only rear light glass red 75 8,00E 93/A 20863016 Protection rubber for tail light 75 5,00

ELECTRICAL-WIRING LOOMSE 420 Wiring loom 50 15,00E 421 Wiring loom 75 20,00E 112 15017070 Spark plug cap All 4,00E 116 20862002 Round junction box rubber cover 75 3,00E 116/C 20862030 Round junction box 75 12,00E 119 20065002 Spark plug cap protection All 3,00E 112/B 19017016 Spark plug cap cable protection All 2,00E 321 � 15017040 Spark plug All 3,00E 125 19017018 Grommet for flywheel cable All 1,00

ELECTRICAL-FLYWHEELE 184 860021 Contact points Dansi ADL 159V 50 12,00E 153 860036 Condenser 50 6,00


E 263

E 261

B 54

C 216

C 140L 146

C 141

E 150 840183 Contact points Dansi ADL 132V-150V 50-75 12,00E 151 840091 Condenser 75 8,00E 260 860042 H.T. coil adaptable (standard type) All 35,00E 261 20955060 Plastic flywheel cover 50 25,00E 262 20855012 Plastic flywheel cover 75 25,00E 263 20955021 Small plastic L.T. wires cover for E 261 50 8,00

HANDLEBARL 29 20011006 Clutch-brake lever (each) All first prod. 10,00L 31 20011013 Lever pin All 3,00L 26 19062019 Lever anti vibration cap All 0,80L 27 19062021 Lever anti vibration spring All 1,20


CABLES-VARIOUSL 127 Inner and outer cables complete kit 50-75 S 25,00L 128 20070004 Cable cluthc/gear shroud (each) All 2,00L 133 20052035 Gear cable trunnion short All 4,00L 132 20053021 Gear cable trunnion long All 4,00L 137 20052038 Gear/clutch adjuster 6 mm (each) All 2,50L 134 20053018 Tie rod for gear control 50 3,00L 138 20353018 Gear tie rod Vega-Cometa 3,00L 129 20970005 Headlamp top “8“ grommet for cables All 3,00L 148 20971004 Throttle cable “L” tube (on the handlebar) All 8,00L 149 20912004 Throttle sleeve (on the handlebar) All 16,00L 150 20912006 Throttle pawl (on the handlebar) All 5,00L 146 20912003 Throttle control complete (on the handlebar) All 60,00

CARBURETTORB 48 20958020 Fuel tap 50 10,00B 48/B 20858070 Fuel tap 75 10,00B 49 412449 Carburettor SHA14/12 50 58,00B 54 20855030 Air filter housing complete 75 80,00B 56 20855005 Air filter element (inside) 75 10,00

SPEEDOMETERA 20 611109 Speedo cable complete (square 2 mm) All 10,00A 20/B 611109 Speedo cable complete (square 2,5 mm) All 10,00A 21 611112 Speedo drive complete (square 2 mm) Under 2,5 mm 30,00A 26/B 20990050 Speedo round cover black (on the handlebar) All 8,00


Complete seat for Vega.

Crankshaft complete for Vega.

C 377

M 58

Rear light complete for Vega.

E 93/B


60

Lambretta 48(moped)48 (moped) produced from August 1955 untilMarch 1961 in 63.223 examples.

From frame number: 10.001.

Identification particulars “48”:Very first version until October 1955:Left hand side engine side cover with chromedisc & red ‘innocenti’ logo, single gearboxcontrol cable, external H.T. coil, luggage carriertoolox with metal covers, engine‘decompressor’ valve fitted to cylinder head.

First version until October 1958:Single gearbox control cable, external H.T. coil,luggage carrier toolox with plastic covers, lefthand side engine cover with cast ‘Innocenti’logo, engine ‘decompressor’ valve fitted tocylinder head.

Second version from October 1958 until endof production:Twin gearbox control cables, internal H.T. coil,engine ‘decompressor’ valve eliminated.

Very late production:Handlebar lever supports in aluminium.

Lechler colour codes:Landa-Grey 8041 • Pompei-Red 8045• Lambro-Grey 8034

Colour schemes 48: All in the same Landa-Grey, Pompei-Red or

Lambro-Grey colour, except the hubs and theseat frame which are painted in AluminiumFIAT 690.The crankcase is always painted in AluminiumFIAT 690.

The rear shock absorbers are usually paintedin the same colour as the bodywork; wherefitted, the second version larger type rearshock absorbers must be polished - notpainted.



ENGINEM 5 14010240 Piston 40 mm + oversizes All 38,00M 27 Conrod complete kit All on requestM 54 14010210 Crankshaft complete All on requestM 76 14010111 Recon. cylinder All 90,00M 100 14010112 Cylinder head 1st series 40,00M 100/B 14010112 Cylinder head 2nd series 40,00M 115 Engine oilseal kit All 12,00M 129 14020010 Clutch plate (single) Surflex All 18,00M 181 Engine gasket kit All 25,00M 277 99145660 Exhaust with clamp All 80,00M 278 99145610/03 Exhaust tube with brass ring All 40,00

FRONT SUSPENSIONT 54 14060040 Buffer All 5,00T 55 14060014 Spring All 10,00T 56 14060018 Fork link pin All 8,00T 57 14060013 Fork link bush All 5,00T 58 Cone kit for forks All 40,00

WHEELST 188 ✩ 14040425 Tyre 2 x 22 All 42,00T 189 ✩ 14040426 Tube 2 x 22 All 15,00

STANDT 241 14050703 Stand pin All 6,00

T 242 14050711 Spring All 16,00T 240 � 99145720 Stand All 80,00

BODYWORK PLASTICS & RUBBERSC 118/B 14080629 Toolbox round plastic cover All 12,00C 119/B 14070025 Filler cap All on request

BADGESC 213 14070012 Pair of “Lambretta 48” stickers All 8,00

SEATC 356 14050510 Seat cover All 42,00

ELECTRICAL-SWITCHESE 73 14080040 Headlamp chrome rim All 25,00E 75 14080390 Headlamp reflector with bulbholder All 15,00E 74 14080007 Headlamp glass All 20,00E 76 14080305 Rear light chrome rim All 28,00E 78 14080060 Light switch All 15,00E 22 6011165 Horn All 36,00E 305 � 14080008 Headlamp bulb 15/15W x 6V All 2,00E 307 � 87550300 Torpedo festoon bulb 3W x 6V All 1,00

ELECTRICAL-WIRING LOOMSE 112 15017070 Spark plug cap All 4,00E 123 14010726 Protection cable flywheel 1st ser. 5,00E 124 14010728 Protection cable flywheel 2nd ser. 5,00

Lambretta 48 second series.

Maintenance datas:

Mixture 6% spark plug 240 Bosch short reachMotor oil SAE 15/50 400 gr. Carburettor T5-11S main jet 62 slide 50Carburettor T4-12S main jet 60 slide 50

List of screws, nuts and accessories in the back of the catalog

61



ELECTRICAL-FLYWHEELE 158 840030 Contact points Ducati All 15,00E 159 840008 Condenser Ducati All on requestE 161 831459 Contact points Marelli All 15,00E 162 831569 Condenser Marelli All on requestE 160 831516 H.T. coil (external) 1st ser. on requestE 157 840009 H.T. coil (internal/stator mounted) 2nd ser. on request

HANDLEBARSL 10 14060209 Lever pin All 5,00


CABLES-VARIOUSL 135 14050037 Frame grommet for cable (small) All 3,00L 136 14050039 Frame grommet for cable (large) All 3,00

CARBURETTORB 53 14070110 Fuel tap All 6,00B 52 14010530 Carburettor alloy cover All 28,00B 51 14010604 Air hose All 15,00


LAMBRETTA 48


New stand in steel, original pattern. Exhaust system with chrome tube and brass ring.

T 240

M 277 - M 278


62

Lambretta 125-150 LDFRANCIALambretta LD was manufactured in Franceunder licence, from 1953 to 1957, in a factorynear Trojes, not far from Paris, the capital city.At the beginning this scooter model was theexact copy of the Italian one, except for thebigger front light.Afterwards this scooter model was changed invarious steps; the body and the engine weremodified. It’s easier to classify the scootermodels in three series because a lot of changeshave been made to them during the years.The first series is the 125 LD which wasproduced in 1953-54.It was manufactured exactly like the Italian onebut with a bigger front light. In order to have abigger front light a collar joint was put betweenthe front part of the body and the light.The second series, manufactured from 1954 to195, perhaps the most known model, isdifferent from the first one for many changesdesigned and manufactured directly in France:a simplified Teleflex on the engine, newlydesigned handlebars, rubber seats, the starterand petrol control are on the central part of thebody (under the seat), the front part of thebody has a wider area for lights andaccessories, all these accessories are ofFrench manufacture.The third version, assembled in 1957, can be

recognized for the careening on the handlebarsand for a planetary gear kick start.There is also a model with an electrical starter,the De Luxe, which has the starter on the right-hand side very close to the starter case and it’sset by a kick starter.

For the restoration of these models people haveto look for the corresponding Italian model onthe catalogue. The following list is the spareparts availability for these models at CasaLambretta’s. For a more specific prize list peoplecan apply to Casa Lambretta dealers in France.



ENGINEM 183/F 51181001 Complete exhaust with 2 support ’56-’57 120,00M 133 51110040 Kick start gasket 6 holes ’55-’56 3,00M 279 � Kick start lever chrome (France) LD’55-57 60,00

REAR SUSPENSIONT 94/C 58110037 Engine stop buffer ’55-’57 5,00T 238 Rear shock adsorber (France) LD’55-57 65,00

PLASTIC bodyC 35/F 05170115 Filler cap collar black All 6,00

BODY writtenC 150/F 58180065 Shield plastic emblem All 35,00C 148/F Front emblem (France) LD 15,00

BODY metalC 265/F 51011060 Number plate support ’54-’57 25,00

BODY seatsC 367 ✩ 58011146 Seat cover rubber grey ’54-’57 90,00C 368 ✩ Passenger seat strap in rubber grey ’54-’57 20,00C 369/F Rubber buffer for seat frame ’54-’57 20,00

HAZARD lights - horn - switchesE 20/F � 51011055 Rear light red lens ’54-’57 30,00E 18/F 58010055 Headlight chrome ring LD ’55-’56 20,00

COMMANDS, and sheaths terminalsL 80 51031001 Teleflex cable complete ’55-’57 46,00L 155 51030012 Rubber protection for Teleflex on the engine ’55-’57 6,00L 156 51111004 Choke control with cable ’55-’56 30,00L 157 11111005 Choke control with cable ’57 30,00

CONTROLS knobsL 158 06770410 Pair grips grey ’54-’57 15,00

ODOMETERA 323/F 51010062 Speedo rubber gasket grey (square) All 6,00

LD first version.


M 183/F

C 367

C 150/f

M279 T238 C148/F

63

LAMBRETTA Spagna Eibar and Serveta


Lambretta SpagnaEibar and ServetaAs for others Italian motorcycle firms, Innocentidecided to manufacture Lambretta in Spainestablishing a company called “LambrettaLocomociones SA” with its head office in Eibar.The manufacture started in 1954 with 125 D-LDmodels whichdirectly come from the Italianmodels. The only relevant aesthetic change madeon these model was the use of bigger seats thanthe ones used on the same Italian models. A morecomplex intake system was put on LD models inorder to better purify the air which goes to thecarburettor. In 1960 began the manufacture of theLI 2 series, with 3 different kinds of swept volume.These series have a distinctive rotating mudguardand in 1964 the LI 3 scooter line was introduced.At the beginning of the production the third serieswas manufactured on the Italian model and sothese two models were identical. Then, after theshutdown Italian factory, this series has beenwidely changed in different versions which arehardly recognizable. In order to simplify theidentification of these scooters I have groupedthese alterations in three different series. The firstversion, manufactured in the 1970s, ischaracterized by the pannier in which there wasthe air box, the grey rubber floor mats withoutholds/ strips, and the headlight with three fixingscrews. The second series, called 80 series, isrecognizable for the squared seat, the fiberglassmudguard, the pannier put in the shield, the blackfloor mats and the simplified intake system. Thethird series, called Lince, can be recognized forthe fiberglass front shield, for the plated badgeson the side panels. The second manufactured ofthis series has a big frame on the handle bars anda rectangular rear light. The latest manufacture of1986 can be recognized for the use of the originallight and the petrol valve on the footboard. Forplacing an order for spare parts people mustsearch in the correspondent Italian section. Fordifferent parts it’s better to refer to the list availableat Casa Lambretta’s, or for special spare parts, toauthorized dealers in Spain.



PLASTIC bodyC 101/B 19950044 Pair of mudguard/legshield rubber black LI 3 I series 8,00A 50 55.0001/2 Kit 4 pieces floor rubber mats grey until ’78 50,00A 51 55.0001/2 Kit 4 pieces floor rubber mats black since ’79 50,00C 18/G 15071002 Grommet grey for rod fuel tap All 2,00C 84/G 19030037 Kick start rubber grey LI 2 Spain 4,00

BODY writtenC 150/E Shield brass LD Eibar LD all 35,00C 162/S 19250071 Front shield badge “Serveta” LI until ’78 12,00C 161/E “Front shield emblem “Eibar” LI-TV II s. 20,00C 157/S Legshield badge ally “Lambretta” LI IIs. 10,00C 158/S Legshield badge alloy “125 LI” 150 LI IIs. 7,00C 159/S Legshield badge alloy “150 LI” 125 LI IIs. 7,00C 171/S 19955093 Rear plastic badge “Lambretta” black LI 3 I series 10,00C 170/S 19955093 Rear plastic badge “Lambretta” white LI 3 I series 10,00C 162/E 19250071 Front shield badge “Eibar” LI II s 12,00C 177/S 650010 Legshield badge “JET 200” Jet 200 14,00C 380 455011 Pair os sidepanel strip stickes “125” 125 20,00C 381 555011 Pair of sidepanel strip stickers “150” 150 20,00C 382 655011 Pair of sidepanel strip stickers “200” 200 20,00

BODY seatC 330 Single seat cover front brown LD 45,00C 330/A Single seat cover rear brown LD 46,00C 331 Single seat cover front black LD 46,00C 331/A Single seat cover rear black LD 46,00

ELECTRICITY - lights - horn - switchesE 62/B 19983005 Rear light housing/frame gasket black LI all 4,00E 59/S � 19780050 Headlight reflector and glass 3 support LI 3 I series 25,00E 425 Rear light red lens (square type) 74-’81 12,00

ELECTRICITY flywheel magnetoE 150/S S-150 Contact points Motorplat LI all 12,00E 151/S � CN-10 Condenser Motorplat All 8,00B 215 Fly wheel puller Motorplat All 15,00

CARBURETTORS filters and tapsB 252 � CM516002 Carburettor air hose LI all from ’74 10,00B 251 CM516001 Air filter element LI all from ’74 14,00B 261 Carburettor air hose LD late type 18,00

150 Special 1975.

Lince 1980.

B 251

B 252

A 51


64

Nuts - Screws - Washers - Grease nipplesCode Code Description Model Price

InnocentiCode Code Description Model Price

Innocenti

BODY SECTIONB 170 99096207 Circlip to fix the handlebar sleeve D-LD from ’53 2,00B 80 12180137 Special nut with slot for front floorchannel endcap LD from ’54 1,00B 66 72040008 Nut 8 mm (hexagon 14) medium size All 0,40B 182 99095905 Kit 2 washer and circlip for rear brake pedal C-LC-D-DL-E-F 2,50B 98 15080002 Cup washer 4 mm for headlight rim LD ’57 0,20B 171 99096208 Adjuster thin washer for handlebar sleeve All 0,80B 69 3C306 Screw slotted raised countersunk 4x8 stainless All 0,20B 70 2TR103 Screw slotted raised countersunk 4x12 stainless All 0,20B 71 2ST303 Screw slotted raised countersunk 4x20 stainless All 0,20B 71/B Screw slotted raised countersunk 4x25 stainless All 0,20B 71/C Screw slotted raised countersunk 4x30 stainless All 0,20B 77 70370820 Screw 8x20 mm (exagon 14) All 1,00B 77/B 7770226 Screw 8x25 with chrome head for handlebar C-LC-D-LD-E-F 4,00B 77/C 7770227 Screw 8x40 with chrome head for handlebar D-LD from ’53 4,00B 177 99000095 Screw 8 x 65 for rear seat C-D 2,00B 198 09.5.503 Exagonal screw for rear seat E-F 3,00B 81 11180442 Screw slotted raised countersunk 6x30 for handlebar D-LD from ’53 1,00B 82 70910508 Screw 5 x 12 slotted round head All 0,20B 83 70360518 Screw 5 x 20 slotted round head All 0,20B 189 12010614 Screw 3 x 30 for rear light glass LD '57 0,50B 300 2T831 Nickel screw for fix the seat AIIIs.-B 2,50B 301 2T828 Nickel screw for fix the front seat (with pin) AIIIs.-B 2,50B 302 2T825 Nickel screw for fix the front seat support AIIIs.-B 2,50

TV - LI - Special - DL

MOTOR SECTIONB 176 74850465 Woodroof key for flywheel All 0,30B 142 19010028 Engine cone for little silent-block 125-150 LI 5,00B 143 19710028 Engine cone for big silent-block TV-S-SX-DL 5,00B 68 82008010 Nut 6 mm (height) for crankcase cover All 0,30B 106 19018003 Nut 7 mm (brasss) for exhaust All 1,00B 107 19011009 Nut 7 mm (with nylon) for carburettor pipe All 0,50B 137 19010120 Nut 16 mm for engine axle (with nylon) All 4,00B 138 72070016 Nut 16 mm (thin) for rear shock adsorber All 1,00B 147 19017002 Nut for flywheel (4 pole) All until ’62 5,00B 148 19917024 Nut for flywheel (6 pole) All from ’63 5,00B 156 82108011 Nut 7 mm (thin) for gearbox flange All 0,50B 304 19010007 Distance nut for cylinder head All 2,00B 132 87020006 Grease nipple 6 mm All 1,00B 133 87020008 Grease nipple 8 mm All 1,00B 121 19041022 Kit 2 lock washer for chain/clutch All 3,00B 140 19710029 Engine axle (short type) TV-S-SX-DL 10,00B 141 19010029 Engine axle (long type) 125-150 LI 8,00B 75 19010019 Stud 6 mm for crankcase cover All 1,00B 311 19010013 Stud 8 mm for cylinder 125-150 LI I s. 4,00B 123 19210013 Stud 8 mm for cylinder LI-TVII-IIIs-S-DL 5,00B 124 19010053 Stud 8 mm for exhaust support All 3,00B 113 19011008 Stud 7 mm for exhaust pipe (to the cylinder) All 1,50B 114 19010022 Stud 7 mm for gearbox flange All 1,50B 88 83100006 Washer 6 mm (undulated) All 0,10B 89 83100007 Washer 7 mm (undulated) All 0,10B 87 8310008 Washer 8 mm (undulated) All 0,10B 139 83100016 Washer 16 mm (undulated) All 0,40B 167 19030028 Washer between kick start lever and oilseal All 1,00B 168 19045005 Washer under rear hub cone All 1,00B 179 19012037 Washer (thick) between crank bearing/oilseal (flywheel side) All (no 200 DL) 3,00B 180 19012041 Washer (conic) between bearing/chain pinion All (no LI-TV Is.) 1,50B 178 19012038 Washer (cup) between crank bearing/oilseal (flywheel side) All 1,50B 102 85901602 Oil lever plug All 4,00


125 A-B-C-LC-E-F-125/150 D-LD

ENGINE SECTIONB 174 99002404 Woodroof Key for flywheel A-B-C-LC 125 D-LD-E-F 0,50B 175 11110310 Woodroof Key for flywheel 150 D-LD-125 LD deriv. 0,50B 176 02330309 Woodroof key for rear axle All 0,50B 310 3 M 410 Thorn for kick start lever B II-III s. 3,00B 65 2T705 Nut 8 mm (exagon 14) thin B-C-LC 0,40B 66 2T829 Nut 8 mm (exagon 14) medium All 0,40B 68 2M104 Nut 6 tested up to 10 key A-B-C-LC 125 D-LD-E-F 0,30B 155 11110104 Nut 7 mm thick for cylinder head 150 D-LD 125 LD deriv. 0,30B 165 2M312 Nut for flywheel All (no E-F) 4,00B 166 91216 Nut for flywheel E-F 4,00B 192 8 UNI127 Special nut for fork link (with slot) C-LC 2,50B 193 6ST123 Special nut for spring rod (front fork) C-LC 2,50B 195 2T125-126 Screw and nut for rear frame tube A-B 12,00B 164 2M340 Kit 3 pcs. engine nuts lock washers A-B-C-LC 4,50B 161 07110340 Kit 3 pcs. engine nuts lock washers 125 D-LD 4,50B 163 2060122 Kit 5 pcs. engine nuts lock washers 150 D-LD / 125 LD deriv. 7,00B 307 2M339-2F122 Kit 2 special nut for front transmission A-B-C-LC 5,00B 308 7M339-2F122 Kit 2 special nut for front transmission 125 D-LD 5,00B 309 07110339-122 Kit 3 special nut for front transmission 150 D-LD-125LD deriv. 6,00B 61 2M111 Allen split washer for 6mm. All (no E-F) 0,10B 62 2M116 Allen split washer for 8mm. All (no E-F) 0,10B 63 2M110 Flat washer for 6mm. All (no E-F) 0,10B 64 2M115 Flat washer for 8mm. All (no E-F) 0,10B 135 2TR104 Oil filler cap (exagon 10 mm) A-B-C-LC 5,00B 136 99002503 Oil filler cap (exagon 14 mm) D-LD 6,00B 199 00.2.502 Oil plug (internal exagon 12mm) E-F 6,00B 196 9.4.024 Oil plug with breather E-F 12,00B 58 2F141 Hexagon allen screw 6 x 25 mm All (no E-F) 0,30B 59 2M109 Hexagon allen screw 6 x 20 mm All (no E-F) 0,30B 60 2M114 Hexagon allen screw 8 x 30 mm All (no E-F) 0,50B 186 2M414 Screw 6 mm for kick start case A-B-C-LC 3,00B 187 2M413 Screw 4 mm for kick start case A-B-C-LC 2,00B 169 99091211 Screw square head for crankshaft A-B-C-LC-125D-DL 5,00B 194 6x42 UNI224 Screw for front mudguard (slotted round head) C 2,50

SECTION WHEELS - SUSPENSIONB 67 99000515 Nut 8 mm (exagon 14) thick All 0,40B 72 2R116 Special nut chrome with 3 slot front hub A-B 12,00B 306 3R114 Special washer under front hub nut A-B 8,00B 73 2330311 Special nut chrome with 3 slot rear hub All until ’54 (no E-F) 12,00B 74 2160107 Special nut 8 mm (exagon 14) closed C-LC-D-LD 3,00B 74/C 2R107 Special nut 8 mm (exagon 14) closed chrome A-B 4,00B 76 6160138 Special nut 12 mm (exagon 21) front hub A-B-C-LC-D-DL 8,00B 78 19045060 Special nut 16 mm (exagon 27) rear hub All from ’55 (no E-F) 12,00B 150 72070012 Nut for front axle inside fork link All (no E-F) 0,50B 152 94414 Nut for front hub E-F 4,00B 153 94503 Nut for rear hub E-F 5,00B 129 2TR105 Grease nipple 6 mm (exagon 8 mm) All 3,00B 130 99002803 Grease nipple 6 mm (exagon 14 mm) D-LD 3,00B 131 99002802 Grease nipple 8 mm (exagon 14 mm) D-LD 3,00B 144 2160110 Front hub axle All (no E-F) 10,00B 118 15044014 Washer thick between nut and fork link (stainless) C-LC-D-LD-E-F 0,80B 119 99094416 Washer thin adjuster front hub axle (stainless) C-LC-D-LD-E-F 0,80B 125 99106055 Washer between fork and fork link D-LD-F IIs. 0,80B 154 99106067 Alloy cap under front fork D-LD-F IIs. 6,00B 79 15045005 Special screw 5 mm left to fix the rear nut hub 125-150 D-LD ’56-’57 3,00B 126 99106068 Special screw 5 mm for front fork cover D-LD nid ’52-F IIs. 1,50B 127 99106058 Special screw 7 mm for front fork link D-LD-F IIs. 2,50




B 103 19010130 Oil drain plug (magnetic) All 8,00B 104 � 15010090 Oil breather plug All 3,00B 191 19014003 Screw slotted 5 mm for flywheel cover All 0,50

SECTION WHEELS - SUSPENSIONB 84 15044070 Nut (dome type) 21 mm for front hub All 3,00B 84/X 15044070 Nut (dome type) 21 mm for front hub stainless All 7,00B 85 19045060 Nut (dome type) 27 mm for rear hub All 5,00B 85/X 19045060 Nut (dome type) 27 mm for rear hub stainless All 8,00B 92 15044110 Nut (dome type) 13 mm for wheel DL 1,00B 93 15044100 Nut (open type) 13 mm for wheel DL 0,20B 95 15044100 Nut (open type) 14 mm for wheel TV-LI-S-SX 1,50B 95/X 15044100 Nut (open type) 14 mm for wheel stainless TV-LI-S-SX 2,00B 96 15044110 Nut (dome type) 14 mm for wheel TV-LI-S-SX 2,50B 96/X 15044110 Nut (dome type) 14 mm for wheel stainless TV-LI-S-SX 3,00B 150 82118015 Nut for front axle inside fork link All 0,50B 200/K Kit nuts and washer stainless for wheel (40 pcs.) LI-S-150 SX 70,00B 201/K Kit nuts and washer stainless for wheel (42 pcs.) TV-200 SX 75,00B 144 19044004 Axle for front hub LI-S-150SX-125/150 DL 10,00B 145 15044004 Axle for front hub TV-200SX-200DL 15,00B 91 19044002 Stud (2 threaded) for wheel hub All 3,00B 100 15060032 Stud (2 threaded) for front shock adsorber TV-200SX-200DL 3,00B 115 19744074 Lock washer for disc brake nut TV-200 SX-DL 2,00B 86 19045014 Lock washer with screw for rear hub nut All 5,00B 87 83100008 Washer 8 mm (undulated) for wheel and frame All 0,10B 118 15044014 Washer thick between nut and fork link (stainless) All 0,80B 119 99094416 Washer thin adjuster front hub axle (stainless) All 0,80

BODY SECTIONB 80 19050099 Special nut with slot for front floorchannel endcap All 1,00B 66 72040008 Nut 8 mm (hexagon 14) medium size All 0,40B 99 19050098 Elastic nut for pin 4 mm (plastic floor channel) All 0,10B 172 Kit screw/nut/washer to fix horncast/mudguard/legshield LI-TV Is.-IIs. 8,00B 173 Kit screw/nut/washer to fix horncast/mudguard/legshield LI-TV IIIs.-S-SX-DL 8,00B 128 15086016/5 Kit plate and spring to fix the tools in the toolbox All 6,00B 157 � 15086017 Kit 3 screw and plate to fix the toolbox in the frame All 6,00B 182 15059006 Kit 2 washer and circlip to fix the rear brake pedal All 2,50B 185 19917092 Kit 2 screw and 2 distance piece to fix the HT coil All from '66 5,00B 312 70360822/08 Kit screw, nut and whaser for seat (32 pc.) LI-TV I-II s. 18,00B 69 3C306 Screw slotted raised countersunk 4x8 stainless All 0,20B 70 2TR103 Screw slotted raised countersunk 4x12 stainless All 0,20B 71 2ST303 Screw slotted raised countersunk 4x20 stainless All 0,20B 71/B Screw slotted raised countersunk 4x25 stainless All 0,20B 71/C Screw slotted raised countersunk 4x30 stainless All 0,20B 90 71480612 Screw slotted raised countersunk 6x12 for right handlebar All 0,40B 160 15062015 Screw (special size 4 mm) for gear/throttle handlebar roller All until '65 2,50B 110 15055021 Pin for toolbox door LI-TV I-IIs. 2,00B 111 19955021 Pin for toolbox door LI-TV IIIs.-S-SX-DL 2,00B 112 15055040 Pin for petrol cap door All 1,00B 120 19988001 Kit pin/screw/cap/spring for steering lock All 8,00B 183 15062014 Washer 0,4 mm to adjuster gear/throttle handlebar roller All 0,80B 184 15062023 Washer 0,6 mm to adjuster gear/throttle handlebar roller All 0,80B 87 83100008 Washer 8 mm (undulated) for seat and frame All 0,10B 98 19980002 Washer cup for headlight rim screw (4 mm) LI-TV I/IIs. 0,20B 97 15050066 Washer cup for legshield inside screw (5 mm) All 0,20B 116 19955056 Washer in nylon (8 mm) for seat All from ’62 0,50B 190 19055056 Thick steel washer for seat frame All 0,80B 117 19955088 Washer in nylon for panel mechanism LI-TV-S-SX 0,50B 197 15055055 Antivibration washer for panel lever LI-TV-S until ‘65 1,00B 181 19261005 Screw (special size) to fix the handlebar support clamp LI-TV II s. 6,00B 101 19083017 Screw 3,5 mm for rear light glass “Cev-Aprilia” All from ’61 (no DL) 1,00B 189 19083013 Screw 3 mm for rear light glass (with 3 torpedo lamp) All until '60 0,50B 188 19983002 Screw 3,5 mm for rear light glass “Carello” All from ’61 (no DL) 2,00

B 162 19780011 Screw 3 x 20 for headlight rim (stainless) TV IIIs.-S-SX-DL 0,20B 108 71450548 Screw 5 x 48 for handlebar cover LI-TV IIs. 1,00B 108/B 71450542 Screw 5 x 42 for handlebar cover LI-TV Is. 1,00B 109 71450545 Screw 5 x 45 for handlebar cover LI-TV IIIs.-S-SX-DL 1,00B 77 70370820 Screw 8 x 20 mm (exagon 14) All 1,00B 82 70910508 Screw 5 x 12 slotted round head All 0,20B 83 70360518 Screw 5 x 20 slotted round head All 0,20

Junior - Lui

MOTOR SECTIONB 174 74850337 Woodroof key for flywheel All 0,30B 107 19011009 Nut 7 mm (with nylon) for carburettor pipe All 0,50B 149 20055008 Nut for flywheel All 5,00B 68 82008010 Nut 6 mm (height) for crankcase cover All 0,30B 106 19018003 Nut 7 mm (brasss) for exhaust All 1,00B 132 87020006 Grease nipple 6 mm All 1,00B 133 87020008 Grease nipple 8 mm All 1,00B 75 19010019 Stud 6 mm for crankcase cover All 1,00B 113 19011008 Stud 7 mm for exhaust pipe (to the cylinder) All 1,50B 88 83100006 Washer 6 mm (undulated) All 0,10B 89 83100007 Washer 7 mm (undulated) All 0,10B 102 85901602 Oil lever plug All 4,00B 103 19010130 Oil drain plug (magnetic) All 8,00B 104 � 15010090 Oil breather plug All 3,00B 191 19014003 Screw slotted 5 mm for flywheel cover All 0,50

SECTION WHEEL SUSPENSIONB 84 15044070 Nut (dome type) 21 mm for front axle Junior-DL-Special 3,00B 84/X 15044070 Nut (dome type) 21 mm for front axle stainless Junior-DL-Special 7,00B 92 15044110 Nut (dome type) 13 mm for wheel 50 DL-Special 1,00B 93 15044100 Nut (open type) 13 mm for wheel 50 DL-Special 0,20B 95 15044100 Nut (open type) 14 mm for wheel Junior 50-100-125 1,50B 96 15044110 Nut (dome type) 14 mm for wheel Junior 50-100-125 2,50B 95/X 15044100 Nut (open type) 14 mm for wheel stainless Junior 50-100-125 2,00B 96/X 15044110 Nut (dome type) 14 mm for wheel stainless Junior 50-100-125 3,00B 150 82118015 Nut for front axle inside fork link All 0,50B 94 20057007 Nut (dome type) for rear hub All 5,00B 151 20921012 Nut (open type) for front hub LUI 4,00B 91 19044002 Stud (2 threaded) for wheel hub All 3,00B 118 15044014 Washer thick between nut and fork link (stainless) All 0,80B 119 99094416 Washer thin adjuster front hub axle (stainless) All 0,80B 87 83100008 Washer 8 mm (undulated) for wheel All 0,10B 105 20957002 Lock washer for rear hub nut LUI 2,00B 158 20057002 Lock washer for rear hub nut Junior-DL-Special 1,00

BODY SECTIONB 77 70370820 Screw 8 x 20 mm (exagon 14) Junior-DL-Special 1,00B 80 19050099 Special nut with slot for front floorchannel endcap 50 DL 1,00B 66 72040008 Nut 8 mm (exagon 14) medium size All 0,40B 99 19050098 Elastic nut for pin 4 mm (plastic floor channel) All 0,10B 87 83100008 Washer 8 mm (undulated) for seat Junior-DL-Special 0,10B 98 19980002 Washer cup for headlight rim screw (4 mm) Junior-DL-Special 0,20B 116 19955056 Washer in nylon (8 mm) for seat Junior-DL-Special 0,50B 117 19955088 Washer in nylon for panel mechanism Junior 50-100-125 0,50B 69 3C306 Screw slotted raised countersunk 4 x 8 stainless All 0,20B 70 2TR103 Screw slotted raised countersunk 4 x 12 stainless All 0,20B 71 2ST303 Screw slotted raised countersunk 4 x 20 stainless All 0,20B 71/B Screw slotted raised countersunk 4 x 25 stainless All 0,20B 71/C Screw slotted raised countersunk 4 x 30 stainless All 0,20B 90 71480612 Screw slotted raised countersunk 6x12 for right handlebar Junior-DL-Special 0,40B 159 71450432 Screw 4 x 32 for handlebar cover Junior-DL-Special 0,30B 82 70910508 Screw 5 x 12 slotted round head All 0,20

65And ’out the new book “Lambretta accessories” with hundreds of original illustrations.


66



B 83 70360518 Screw 5 x 20 slotted round head All 0,20

EXTRACTORSB 207 Tool to fix the torsion bar D-LD 30,00B 211 Tool to stop the clutch crown LI-TV-S-SX-DL 15,00B 205 Special spanner for rear hub nut (3 slot) A-B-C_LC-D-LD 12,00B 206 Little stand for rear wheel LI-TV-S-DL 12,00B 208 Spark plug spanner (black) LI-TV-S-SX-DL-Junior 10,00B 209 Spark plug spanner (nickel) A-B-C-LC-D-LD 10,00B 213 Flywheel holding tool to stop the flywheel All 20,00

B 214 Silent block puller LI-TV-S-SX-DL 40,00B 200 Flywheel puller All except E-F 12,00B 201 Clutch puller A-B-C-LC-D-LD 16,00B 202 Flywheel puller E-F 12,00B 203 Rear hub puller All (no Lui Junior) 25,00B 204 Clutch puller LI-TV-S-DL-J-Lui 38,00B 212 Fork link puller LI-TV-S-SX-DL 42,00B 210 Kit 5 pcs. Tools for the toolbox LI-TV-S-SX-DL 38,00

L24/C T236 T48

B86 B120 B172

B173 B185 B312

B313 C73/K T45K


Complete handlebar antivibration kit SX-DL. Cone kit for fork Luna-Vega. Buch and pin fork link kit.

Rear hub lock nut kit. Steering lock kit. Nuts-Bolts-Washers kit for mudguard-legshield-horncast LI-TV 1-2° series.

Nuts-Bolts-Washers kit for mudguard-legshield-horncast LI-TV 3° series S-DL.

Fixing kit for round HT coil S-SX-DL. Fixing kit for seats LI-TV 1-2°.

Fixing kit for seats LI-TV 3° S-DL. Rubber pad kit for legshield LI-S-DL. Kit fork buffers, screws and washers LI-TV 3° series.


67

Accessories

A 27 Spare wheel support (aluminium) 125 C 70,00A 28 Spare wheel support (aluminium) LC-LD 70,00A 29 Spare wheel support (aluminium) 125-150 D 70,00A 29/B Spare wheel support adjustable 125-150 LD'57 80,00A 29/C Spare wheel support adjustable Chrome LD '57 110,00A 30 Spare wheel support (aluminium) 125 E-F 70,00A 34/B Spare wheel support inside legshield LI-TV I-II series 60,00A 34 Spare wheel support inside legshield LI-TV-S-SX IIIs.-DL 50,00A 191 Spare wheel support 9 and 10 inch Junior 45,00A 35/B Rear spare wheel support LI-TV I-II series 56,00A 35 Rear spare wheel support LI-TV-S-SX IIIs.-DL 56,00A 130 Spare wheel cover brown 8 inch. C-LC-D-LD-E until '53 30,00A 131 Spare wheel cover green 8 inch. D-LD-F from '54 30,00A 132 Spare wheel cover black 8 inch. LD'57 30,00A 133 Spare wheel cover black 10 inch. LI-S-SX-DL 30,00A 134 Spare wheel cover blue 10 inch. TV-125S 30,00A 135 Spare wheel cover green 10 inch. 150S golden 30,00A 136 Spare wheel cover red 10 inch. 200SX 30,00A 139 Spare wheel cover grey 10 inch. LI-TV-S-SX 30,00A 137 Spare wheel cover 10 inch. grey with pocket All 35,00A 138 Spare wheel cover 10 inch. black with pocket All 35,00

A 36 Front chrome carrier LI-TV II-IIIs.-S-SX-DL 95,00A 31 Rear flat carrier chrome (spare wheel support) LI-TV I-II series 95,00A 32 Rear flat carrier chrome (spare wheel support) LI-TV IIIs.-DL 110,00A 33/B Rear carrier chrome (spare wheel support) LI-TV I-II series 120,00A 33 Rear carrier chrome (spare wheel support) LI-TV IIIs.-S-SX-DL 120,00A 39 Rear carrier “Sebring” chrome LI-TV IIIs.-S-SX-DL 50,00A 39/B Rear carrier “Sebring” chrome LI-TV I-IIs. 50,00A 37 Rear carrier “Serveta” chrome TV-3-S-SX-DL 85,00A 38 Rear carrier (spare wheel support) LD ‘53-LD French 120,00A 40 Floormat grey “Casa Lambretta” 125 C 40,00A 41 Floormat grey “Casa Lambretta” 125D-150 D 40,00A 42 Floormat grey “Casa Lambretta” 125LD-150LD 40,00A 43 Floormat grey “Casa Lambretta” LI I-IIs.-TV IIs. 40,00A 44 Floormat grey “Casa Lambretta” LI-TV IIIs.-S-SX-DL 40,00A 45 Floormat black “Casa Lambretta” LI-TV IIIs.-S-SX-DL 40,00A 46 Floormat black “Casa Lambretta” Junior 40,00A 46/B Floormat grey “CasaLambretta” Junior 40,00A 48 Floormat grey “Casa Lambretta” E 40,00A 49 Floormat grey “Casa Lambretta” F 40,00A 100 Legshield mirror round chrome All 28,00A 101 Legshield mirror rectangular chrome All 28,00A 102 Mirror round chrome medium stem All 30,00A 103 Mirror round chrome long stern All 30,00A 104 Mirror rectangular chrome long stem All 30,00A 106 Mirror/screen support clamp LI-TV-S-DL 8,00A 106/B Special mirror support for under handlebars LI-TV-S-DL 16,00A 114 Special support for mirror LD ’57-’58 30,00

A 107 Flag pennant with spring support All 10,00A 108 Inside legshield chrome bag hook LI-TV I-II series 20,00A 109 Inside legshield chrome bag hook LI-TV-S-SX III series-DL 20,00

Code Description Model Price Code Description Model Price


A 101 A 103 A 106/B

A 111 Headlamp peak 105 mm chrome All for 105 mm dam. headlight 5,00A 112 Headlamp peak 120 mm chrome All for 120 mm dam. headlight 5,00A 113 Measuring cap for oil (Innocenti) All 8,00A 125 Passenger handle chrome C-LC-D-LD until '52 25,00A 126 Chrome border for numberplate All 7,00A 126/B Chrome border for new size italian numberplate All 7,00A 127 Chrome frame for number plate C-LC-D-LD-E-F 10,00A 120 Passenger footrest chrome C-D 70,00A 121 Passenger footrest chrome E-F 60,00

A 200 Windscreen complete with support A 180,00A 201 Windscreen complete with support B 180,00A 140 Tool roll All 20,00A 150 Inside legshield black bag LD-LI-TV I-II series 85,00A 151 Inside legshield black bag LI-TV3-S-SX-DL 85,00A 161 RED rubbers set (brake, kick start, stand) LI-TV-S-SX-DL 18,00A 162 BLUE rubbers set (brake, kick start, stand) LI-TV-S-SX-DL 18,00A 163 GREY rubbers set (brake, kick start, stand) LI-TV-S-SX-DL 18,00A 164 Disc brake windows set BLUE TVIII-SX-DL 200 12,00A 165 Disc brake windows set CHROME TVIII-SX-DL 200 14,00A 166 Disc brake windows set RED TVIII-SX-DL 200 12,00

A 180 Front bumper chrome LI I-II series 65,00A 181 Front bumper chrome LI III series 65,00A 182 Front bumper chrome TV IIIs.-S-SX 65,00A 183 Front bumper chrome DL 65,00A 184 Front bumper chrome Junior 65,00

A 192 Wheelrims chrome (Vigano) LI-S-SX-TV-DL 38,00A 192/s Fork covers chrome (pair) “Super” type LI-S-SX-TV-DL 70,00A 193 Fork covers chrome (pair) D-LD 45,00A 171 Panel chrome finisher (pair) LD 60,00A 210 Legshield borders chrome (pair) 125-150 D 40,00A 211 Legshield borders chrome (pair) 125-150 LD 40,00A 212 Legshield borders chrome (pair) LI-TV I-II series 40,00A 213 Legshield borders chrome (pair) LI-TV IIIs.-S-SX 40,00A 196 Round emblem blue 50 mm 6,00A 197 Round emblem red 50 mm 6,00A 198 Round emblem multicolors 50 mm 8,00A 222 Round emblem Blue/yellow 40 mm 6,00A 223 Rectangular emblem Blue/yellow 8,00A 224 “Emblem “San Cristoforo” Various 15,00A 231 “Innocenti” emblem green for seat Green seat 4,00A 232 “Innocenti” emblem black for seat All black/blue/red 4,00A 233 “Lambretta Innocenti” emblem black for seat S-SX '68, 50 De luxe 4,00A 234 “Lambretta” emblem black for seat DL - LUI 75 4,00C 339 Dual seat cover Red/Cream 80,00C 340 Dual seat cover Blue/Cream 80,00A 170 Kit to fix the shock adsorber at the fork LI-S-SX 150-DL 40,00A 175 Kit speedometer complete with speedo drive 125 D-LD 200,00A 176 Kit speedometer complete with speedo drive 150 D-LD 200,00

Accessories

A 192/s

A 193

A 210

A 100

A 171

A 104

A 113

A 163A 161

A 162

A 111 A 234

A 233

A 232

A 231

A 120

A 175/176

A 41

A 43 A 45

A 150

A 38

A 33

A 181

A 37

A 35

A 34

A 196

A 197 A 222

A 223

A 224

A 198

C 339

C 340

A 39

A 109

A 140

A 39/B

A 200-201

A 170

A 125

A 166

A164

A165

A 29/C

A 137

A 27

Dressed in CasaLambrettaThese new items of clothing sponsored CasaLambretta are dedicated to all Lambretta’s friends. All the items areproduced by one of the major firm in clothing industry which guarantees elegance and quality. The embroideries aremade with a new HD technology which makes the drawing more precise and clear. The sizes available for everyitem of clothing are large and extralarge.

AB 1 POLO SHIRT, SHORT SLEEVE 100% BRUSHED COTTON 200 gr/m2 LIGHTBLUE 30,00

AB 2 POLO SHIRT SHORT SLEEVES 100% BRUSHED COTTON 210 gr/m2 WHITE 30,00

AB 3 PURE COTTON 2 POCKETS SWEATER 280 gr/m2 “JRC” DARK BLUE 45,00

AB 4 2 POCKETS PILE 280 gr./m2 “JRC” RED 45,00

AB 5 LIGHT PILE 2 POCKETS WAISTCOAT 280 gr/m2 DARK BLUE 35,00

AB 6 STUFFED, ANTISCRATCHING, WATERPROOF, HIGH QUALITY WAISTCOAT DARK BLUE 60,00

Code Description Colour Price

AB 1 AB 2 AB 3

AB 4 AB 5

AB 6 AB 6

This part of the catalogue is dedicated to the more ‘sports’ and ‘race’ inclined Lambretta riders. Thanks toour collaboration with tuner Roberto Barone and the world reknowned performance company Parmakit,Casa Lambretta presents a full range of tuning kits and modifications. These are designed to increase boththe performance and efficiency of your engine and to also upgrade the parts of the frame running gear.It must be emphasized that in the main, these kits and modifications are NOT for use on public roads andare strictly for competition use ONLY, on closed circuits.The experience of our engineers, coupled with the high quality of the materials used, allows us to guaranteethe maximum possible efficiency and reliability of all the special products we have prepared for you. The big news for 2013 is that the ‘Casa Lambretta Racing Team’ is competing in the Italian Race Series.This is run by the incredible partnership of Pirini & Tarlazzi; two very passionate engine tuners who knowjust how to deliver the goods and ensure we’ll have podium placings, in what has become a verycompetitive championship. To encourage new riders to take to the track, ‘Casa Lambretta Racing Team’ has prepared two full-blownrace Lambrettas and these are available for customers to use in the Scooter Race Series. Only the costsfor maintenance and / or mechanical assistance will be at the riders expense. For all further informationabout these scooters, to organise a test ride, for advice or to know more about scooter racing in general,please contact Roberto Barone directly at his workshop. Roberto offers a wide range of services includingengine tuning, porting, engine fine tuning set-ups, carburation and assembly of all Casa Lambretta tuningproducts. The workshop also boasts a Dyno bench where all work carried out on your scooter can betested to guarantee perfect results. Roberto Barone is one of the most renowned international scooter tuners and together with his friendsPirini & Tarlazzi, they make up a formidable team capable of professionally covering all aspects ofLambretta tuning. Barone’s workshop is situated in: Via Romea 259, Savio di Cervia (RA), Italy. Mobile: ++39 347 4675239

CasaLambretta racing team

Roberto Barone

CasaLambretta Racing team manager: Barone, Pirini Tarlazzi.

TUNING PARTS FOR LAMBRETTA J Range 50cc& LUI 50cc MODELS

Applicable for Lambretta Models: J50, J50 Deluxe, J50 Special, Lui 50C& 50CLTo increase the performance of your scooter, Casa Lambretta offers you a series of modifications in variousphases: from Phase 1 through to Phase 5, with each step allowing you to progressively add performance, poweroutput and overall top speed.

Phase 1: Cylinder kit ‘Casa 75cc’ X3This special cylinder kit, produced by Parmakit exclusively for Casa Lambretta, is die cast in aluminium with aNikasil lined bore and runs a specially made Meteor piston. The transfer and inlet ports are designed for usewith a carburettor of up to 20mm in size, whilst the exhaust port has been calculated to give good power alsoat low rpm. The kit comes complete with all gaskets and inlet studs.

Phase 2: Oversized front drive sprockets X28 & X29To raise the scooters overall gearing without having to actually change the complete gearbox, there are two newfront sprockets available to obtain the correct final drive ratios. For J50 models with 9 inch wheels, we recommend the use of the 15T front sprocket (X29) whilst for all modelswith 10 inch wheels, the correct part is the 13T front sprocket (X28). In both cases, to avoid changing the drivechain a half-link (X31) can be used to insert into the original chain, to give the correct overall length.

Phase 3: Big Bore Exhaust X42This exhaust has been specifically designed for use with the ‘Casa 75cc’ cylinder kit X3. It can only be used onall J Range models (not Lui). The shape of the exhaust is aesthetically similar to the original Innocenti box butthe expansion area is actually much bigger. Also both the downpipe and tailpipe are much larger, guaranteeingmore efficient gas-flow. With this exhaust we thoroughly recommend the use of a larger Dell’Orto SHD19/19carburettor (X14).

Phase 4: Carburettor SHA15/15 X16 & Carburettor SHB 19/19 X14The larger SHB19/19 carburettor (X14) is destined for use on all kitted J50 models and comes complete with itsdedicated inlet manifold. The carb comes ready-jetted for use with the X3 cylinder kit and it’s designed to beused with the original type rubber air hose. Aesthetically, this is identical to the original SHB16/12 carb as fittedby Innocenti. For Lui models, we recommend the fitment of the SHA 15/15 carburettor kit (X16), again which is visually thesame as the original carb and also has the added advantage that it can be fitted directly to the standard inletmanifold. The scooters original air filter box can also be maintained.

Phase 5: Full circle crankshaft X8aTo increase the crankcase compression, a full circle, perfectly balanced crankshaft is available. With this finalmodification, you now have the full range of tuning parts for your Lambretta, which will now easily be capable ofreaching 80-85kph (50+mph).

X 28X 29

X 14 X 16

X 8 X 42

PISTON PORTED CYLINDER KITS ‘CASA 185’ X1 &‘CASA 210’ X2

Applicable for Lambretta Models: 125-150 LI Series 1, 2, 3, 125-150Special, SX150-200, 125-150-200 GP / DLTo increase the performance of your scooter, Casa Lambretta offers you a series of modifications in variousphases: from Phase 1 through to Phase 6, with each step allowing you to progressively add performance, poweroutput and overall top speed, whilst Phase 7 & Phase 8 offer advised modifications for your clutch and gearbox.

Phase 1: Cylinder kit Casa 185cc X1 & Casa 210cc X2The cylinder kits Casa 185cc & Casa 210cc are aluminium barrels that have Nikasil plated bores, produced byGilardoni. The pistons used for these kits are made by Asso. The casting method uses dies in order to guaranteeboth continuous perfect barrel dimensions and mechanical robustness. The perfectly sized 5 transfer ports giveboth kits great power outputs without penalizing low rpm torque. Also the increased heat dispersion of these kitsmeans that you’ll get much better mpg. We have found that with a correct carburation set-up, it’s easy to achieve40km per litre, whilst maintaining a constant cruising speed of 80-90kph (55+mph). Another point worthy ofmention is the unquestionable reliability of these kits, due in no small part to both the quality of Giliardoni’sNikasil bore lining and the superb Asso pistons, fitted with 2 x 1.5mm rings. We designed these kits with dailyuse in mind - rather than for full out racing – and in ‘standard’ form the end result is that your Lambretta will havea great spread of useable power right across the whole rev range and still give wonderful fuel economy.

Phase 2: Oversized front drive sprockets X25, X26 & X27 (recommended for125cc’s)If you significantly raise your scooters power output then it is absolutely necessary to alter your scooter’s gearingto suit. To raise the overall gearing without having to actually change the complete gearbox, there are variousbigger front sprockets available to obtain the correct final drive ratios. As such, there are 16T, 17T and 18Tsprockets available (X25, X26 & X27), depending on your needs. For example, for 125cc models we advise thefitment of a 17T sprocket (X26), which will give a perfect compromise between acceleration and top speed.

Phase 3: Big Bore exhausts X21 & X22The Casa Lambretta Clubman exhaust is an identical copy of the ‘big bore’ exhausts used in Great Britain duringthe 60’s. These exhausts are larger than their standard counterparts and will increase the performance of thevarious cylinder kits, whilst still maintaining a perfectly acceptable level of noise. The shape of the CasaClubman’s is aesthetically similar to the original Innocenti exhausts and therefore the overall appearance of yourLambretta remains the same. The insides of these exhausts are lined with sound proofing materials to reducethe metallic sound normally associated with performance exhausts.

Phase 4: Larger carburettors X10 & X13The raise even further the level of power from the Casa 185 & 210 kits, we recommend the fitment of a largerbore carburettor. There are two choices: a) Jetex 24mm carburettor (X10); this is a good quality product that can be fitted to a GP / DL150 inlet manifold

(item B254). This is a quick, easy solution to gain an improvement in performance (above all at the top end)without changing the overall appearance of your Lambretta.

b) Dell’Orto PHBL 26mm carburettor (X13); this is a high quality top of the range part produced by the well-known Italian company Dell’Orto. This carb needs to be fitted to a special inlet manifold (X12) and is rubbermounted. This is undoubtedly the advised solution if you want the best level of power output coupled withthe total reliability offered by this superb Italian made product.

Both these carbs can be run through the original Lambretta air filter box although a GP / DL type under-seatairscoop must be used (or simply remove the baffle membrane actually cast into the air scoop, if you have a nonGP / DL item). A GP / DL type air hose for 22mm carbs must be used (item B39).

Phase 5: Special full circle crankshaft X4Another top modification available is a full circle crankshaft which is electronically balanced and fitted with aspecial con-rod. This type of crankshaft will raise crankcase compression and the superb quality con-rod is an

absolute must for higher output engines. If you don’t wish to change your crankshaft unit, then you can still reap the benefits of raising your crankcase

compression by fitting a set of our nylon bushes (X20) to your standard crankshaft. These bushes are designedto fit into the holes found within the webs of Innocenti crankshafts.

Phase 6: 12V Electronic ignition ‘Casatronic’ X45, X46 & X47A big step towards improving both the reliability and usability of any Lambretta is the fitment of a Casa Lambrettaelectronic ignition system. These ignitions are produced exclusively for Casa Lambretta and are unique in thatthe flywheels are machined from a single part and the weights for the ‘standard’ kit flywheels X45 & X46 areidentical to the original Innocenti parts. These electronic kits really are mechanically perfect and undoubtedly themost reliable ignitions available on the market. An added advantage is that all Casa electronic kits have a currentregulator that is identical to the original Ducati part, thus maintaining the original look and originality of yourLambretta. The maximum power output is 90W which is more than sufficient to power all the scooters lights andany additional accessories. All Casa electronic ignitions have the possibility to charge a battery as standard.If you wish to have a lightened flywheel, kit X47 has a 2.0kg weight flywheel, which is ideal for tuned engines.This is only available for the larger coned GP / DL type crankshafts.

Phase 7: Uprated clutch X36For engines with increased power output, it is recommended to uprate the clutch with a special 5 plate kit,produced by Surflex. This has 5 friction plates and comes complete with a set of reinforced springs. Fitment isidentical to a standard Lambretta clutch.

Phase 8: Cyclone 5 Speed gearboxFor those of you that really want to get the most from your engine, a complete high quality close-ratio 5 speedgearbox has been produced, that can be fitted to any Series 1, 2, 3, GP / DL Lambretta without any modificationwhatsoever to the actual engine casing. The kit is called the ‘Cyclone 5 Speed’ and is produced by RiminiLambretta Centre. Please contact them directly with any enquiries or for more technical information (see their fullpage advert contained within this catalogue, following this section).

PLEASE NOTE:a) If you wish to fit a Casa 185 kit (X1) to a Series 1 LI 125-150 it is also necessary to fit new, longer barrel studs

(item B123) and a larger type cylinder cowling (item C440).b) For TV175 Series 2 & 3 models, it is necessary to fit a shorter type LI type con-rod, as the TV con-rod is longer

and therefore not compatible with the gudgeon pin heights of the piston contained within the X1 cylinder kit. c) The neck of the air-filter boxes fitted as standard to Series 2 Lambrettas is very small. If you wish to fit a larger

carburettor then it is extremely advisable to change it with a Series 3 equivalent.

X 1 X 2

REED VALVED INDUCTION 200cc-225ccCYLINDER KITS X6 & X7

Aimed at the most sports inclined Lambretta riders, an all new reed valveinduction cylinder kit has been developed by Casa Lambretta, togetherwith Parmakit and tuner Roberto Barone.

To increase the performance of your scooter, Casa Lambretta again offers you a series of modifications in variousphases: from Phase 1 through to Phase 6, with each step allowing you to progressively add performance, poweroutput and overall top speed, whilst Phase 7, Phase 8 & Phase 9 offer advised modifications for your clutch andgearbox.

Phase 1: Cylinder kit X6 & X7This new cylinder kit is the result of an in-depth study into all the very latest technologies in 2-strokedevelopment. The end result is a barrel that is very powerful, yet reliable and will satisfy even the mostdemanding Lambretta owner. The piston is produced by Vertex and is forged, based on our exclusive design.The cylinder head is machined from solid billet to guarantee its strength and eliminate the possibility of warping.The actual cylinder is high-pressure die cast: a method that offers much stronger and totally precise castings.The reed valve has 6 petals with reed stops and the inlet manifold is gas flowed. A 66mm bore 200cc version isavailable for small block (125cc-150cc-175cc) engine casings whilst the 225cc version for large block (200cc)casings will have a 70mm piston.

Phase 2: Dell’Orto PHBL 26mm carburettor X13To feed such a highly tuned cylinder kit it is necessary to fit a much larger carburettor. Fitting a Dell’Orto PHBL26mm kit (X13) will already allow you to obtain fantastic results. This can be used in conjunction with the originalLambretta airfilter box and a GP / DL type under-seat airscoop. However, if you wish to unleash the kits fullpotential you may wish to fit a larger 28-32mm carburettor along with a sponge type remote filter.

Phase 3: Oversized front drive sprockets X25, X26 & X27If you significantly raise your scooters power output then it is absolutely necessary to alter your scooters gearingto suit. To raise the scooters overall gearing without having to actually change the complete gearbox, there arevarious bigger front sprockets available to obtain the correct final drive ratios. As such, there are 16T, 17T and18T sprockets available, depending on your needs. Also available is a lightweight, one-piece 46T clutch basketcrownwheel (X32).

Phase 4: Big Bore exhausts X21 & X22 & Titanium expansion chamber X43As we all know, a good exhaust can make all the difference on a tuned 2-stroke engine. For these types of reed valveinduction cylinders, the Casa Clubman exhausts (X21 & X22) are a good compromise between having an originalappearance and obtaining a notable gain in performance. For top of the range performance, we have a stunningexpansion chamber available (X43). This exhaust is made completely in Titanium and is feather-light. It offers the bestpossible performance for our reed-valved kits and unleashes a notable raise in mid-range power output.

Phase 5: Special full circle crankshaft X4Another top modification available is a full circle crankshaft which is electronically balanced and fitted with aspecial con-rod. This type of crankshaft will raise crankcase compression and the superb quality con-rod is anabsolute must for higher output engines. If you don’t wish to change your crankshaft unit, then you can still reapthe benefits of raising your crankcase compression by fitting a set of our nylon bushes (X20) to your standardcrankshaft. These bushes are designed to fit into the holes found within the webs of Innocenti crankshafts.

Phase 6: 12V Electronic ignition ‘Casatronic’ X45, X46 & X47A big step towards improving both the reliability and usability of any Lambretta is the fitment of a Casa Lambrettaelectronic ignition system. These ignitions are produced exclusively for Casa Lambretta and are unique in thatthe flywheels are machined from a single part and the weights for the standard kit flywheels X45 & X46 areidentical to the original Innocenti parts. These electronic kits really are the business and are mechanically perfect.An added advantage is that all Casa electronic kits have a current regulator that is identical to the original Ducatipart, thus maintaining the original look and originality of your Lambretta. The maximum power output is 90Wwhich is more than sufficient to power all the scooters lights and any additional accessories. All Casa electronic

X 7

X 6

X6

ignitions have the possibility to charge a battery as standard. If you wish to have a lightened flywheel, kit X47has a 2.0kg weight flywheel, which is ideal for tuned engines. This is only available for the thick-taper GP / DLtype crankshafts.

Phase 7: Special uprated clutch X33For engines with increased power output, it is recommended to uprate the clutch with a special type clutch unit,designed and produced exclusively by Casa Lambretta. This new uprated clutch is unique in the way it’smanufactured and gives total reliability, even under the most extreme conditions of use. The clutch uses 5 Surflexfriction plates and 6 springs. In use, the clutch is light, progressive and mechanically exceptional.

Phase 8: Cyclone 5 Speed gearboxFor those of you that really want to get the most from your engine, a complete high quality close-ratio 5 speedgearbox has been produced, that can be fitted to any Series 1, 2, 3, GP / DL Lambretta without any modificationwhatsoever to the actual engine casing. The kit is called the ‘Cyclone 5 Speed’ and is produced by RiminiLambretta Centre. Please contact them directly with any enquiries or for more technical information (see their fullpage advert contained within this catalogue, following this section).

Phase 9: Direct gear driven primary drive system X34 & X35The latest product from Casa Lambretta is aimed fairly and squarely at the most demanding Lambretta rider,looking for perfection. This is a complete primary drive system, coupled with a special version of the new CasaLambretta 5 plate / 6 spring clutch set-up. This high-technology product uses gears to transmit the power fromthe crankshaft to the gearbox, without the need for a power-sapping drive chain. This allows more power to betransferred to the rear wheel and renders your primary drive set-up ‘eternal’. No more problems with chain guideadjustment or stretched chains to replace!

X 25X 26X 27

X 33

X 32

X 1 Kit Cylinder/piston/head “Casa185” LI-TV-S-SX-DL 380,00X 2 Kit Cylinder/piston/head “Casa210” SX-DL 200 420,00X 3 Kit cylinder/piston/head “Casa75” Junior-Lui 50 190,00X 4 Crankshaft special big cone for 185 185 (GP cone) 220,00X 6 Cylinder kit reed valve Casa 200 Crankcase 125-150 550,00X 7 Cylinder kit reed valve Casa 225 Crankcase 200 650,00X 10 � Carburettor Jetex 24 mm LI-TV-S-SX-DL 60,00X 11 Fuel tap “fast flow” LI-TV-S-SX-DL 15,00X 12 Carburettor pipe for Dell’Orto PHB 26/28 LI-TV-S-SX-DL 40,00X 13 Carburettor Dell’Orto PHBL 26 X1-X2 135,00X 14 Carburettor Dell’Orto SHB 19/19 with pipe X3 series Junior 95,00X 16 Carburettor Dell’Orto SHA 15/15 X3 series LUI 55,00X 17 Air scoop open (DL type) All 12,00X 20 Kit 4 nylon plugs for crankshaft holes LI-TV-S-SX 12,00X 21 Exhaust system “Clubman” 42 mm LI-TV 3 -S-SX-DL 200,00X 22 Exhaust system “Clubman” 42 mm LI-TV 2 200,00X 23 Exhaust 2 chrome pipe for LI 3-DL LI-TV 3 -S-SX-DL 120,00X 42 Special exhaust for kit 75 50 J,DL,Special 90,00X 43 � Special exhaust in Titanium LI-S-SX-DL 550,00X 25 Sprocket 16 teeth LI-TV-S-SX-DL 35,00X 26 Sprocket 17 teeth LI-TV-S-SX-DL 35,00X 27 Sprocket 18 teeth LI-TV-S-SX-DL 28,00X 28 Sprocket 13 teeth Junior-Lui 50 28,00X 29 Sprocket 15 teeth Junior-Lui 50 28,00X 30 Offset link LI-TV-S-SX-DL 5,00

Code Description Model Model Price

Casa PerformanceX 31 Offset link Junior-Lui 50 4,00X 32 Crown clutch wheel light type (z46) All 70,00X 33 Special clutch, new technology, 5 disch 6 spring LI-S-SX-DL 280,00X 34 Special gear transmission LI-S-SX-DL in preparationX 36 Special clutch 5 disc (Surflex) All 75,00X 40 Long seat complete “Clubman” LI-TV-S-SX-DL 200,00X 41 Rear shock adsorber with gas full adjustable LI-TV-S-SX-DL 150,00X 81 ✩ Rear shock adsorber with gas “BMG” LI-TV-S-SX-DL 220,00X 82 ✩ Pair front shock adsorber with gas “BMG” LI-TV-S-SX-DL 220,00X 45 Electronic flywheel complete kit 2,8 kg. LI-TV-S-SX 320,00X 46 Electronic flywheel complete kit 2,8 kg DL 320,00X 47 Electronic flywheel complete kit 2 kg DL 320,00X 48 � Points flywheel 12 V with stator (little cone) TV-LI-S-SX 200,00X 50 Rubber support for extra headlight “Lucas” LI-TV-S-SX-DL 25,00X 51 Sprint rack for special seat X 40 Clubman LI-TV-S-SX-DL 40,00X 60 Horn 12 Volt A.C. 12V wiring 36,00X 61 Horn 12 Volt D.C. 12V wiring 36,00X 70 � Brake idraulic disc (external) LI 3°s. 320,00X 71 � Brake idraulic disc (external) 125-150 S-SX-DL 320,00X 72 ✩ “Wheel rim alloy fro tubless tyre “SIP” LI-S-SX-DL 85,00X 80 � Speedometer electronic “SIP” LI3°-S-SX-DL 180,00E 317 � Headlight bulb 35/35 W 12V 12V wiring 1,00E 318 � Rear light bulb 5/21 W 12V 12V wiring 1,50E 319 � Torpedo bulb 5 W 12V 12V wiring 1,00

Code Description Model Model Price

X 36

X 30

X 23X 50

X 40

X 70-71

X 51

X 70-71 X 72

X 34X 35

X 45-X 46-X 47X 10

X 11

X 22

X 13

X 21

X 43

X 80X 41

X 4

X 12

X 48

X 82

X 81

Instruction bookletCode Description Model Price Code Description Model Price

P 20 Owner’s manual 125 m (A) 125 A (m) 8,00P 21 Owner’s manual 125 B 125 B 8,00P 22 Owner’s manual 125 C-LC 125 C-LC 8,00P 23 Owner’s manual 125 D-LD 125 D-LD '52-'55 8,00P 24 Owner’s manual 150 D-LD 150 D-LD '54-'56 8,00P 25 Owner’s manual 125 LD der. 125 LD '56 8,00P 26 Owner’s manual 125 LD '57 125 LD '57 8,00P 27 Owner’s manual 150 LD '57 150 LD '57 8,00P 28 Owner’s manual 125 E 125 E 8,00P 29 Owner’s manual 125 F 125 F 8,00P 30 Owner’s manual 175 TV 1 175 TV 1 8,00P 31 Owner’s manual 125 LI I series 125 LI I series 8,00P 32 Owner’s manual 150 LI I series 150 LI I series 8,00P 33 Owner’s manual 175 TV II series 175 TV II series 8,00P 34 Owner’s manual 125 LI II series 125 LI II series 8,00P 35 Owner’s manual 150 LI II series 150 LI II series 8,00P 36 Owner’s manual 125 LI III series 125 LI III series 8,00P 37 Owner’s manual 150 LI III series 150 LI III series 8,00

P 38 Owner’s manual 175 TV III series 175 TV III series 8,00P 39 Owner’s manual 150 Special 150 Special 8,00P 40 Owner’s manual 125 Special 125 Special 8,00P 41 Owner’s manual 200 SX 200 SX 8,00P 42 Owner’s manual 150 SX 150 SX 8,00P 43 Owner’s manual 125 DL 125 DL 8,00P 44 Owner’s manual 150 DL 150 DL 8,00P 45 Owner’s manual 200 DL 200 DL 8,00P 46 Owner’s manual Cento Junior 100 8,00P 47 Owner’s manual J50 Junior 50 8,00P 48 Owner’s manual J 125 J 125 3 m 8,00P 54 Owner’s manual 125J4m 125 J 4m 8,00P 49 Owner’s manual 50 De Luxe 50 De Luxe 8,00P 50 Owner’s manual 50 Special 50 Special 8,00P 51 Owner’s manual 50 Lui C-CL Lui 50 C-CL 8,00P 52 Owner’s manual 75 Lui S-SL Lui 75 S-SL 8,00P 53 Owner’s manual 48 moped moped 48 8,00

Spares catalogueCode Description Model Price Code Description Model Price

P 60 Spare parts catalog 125 m (A) 125 m (A) 35,00P 61 Spare parts catalog 125 B 125 B 12,00P 62 Spare parts catalog 125 C 125 C 12,00P 63 Spare parts catalog 125 LC 125 LC 12,00P 64 Spare parts catalog 125 D 125 D 12,00P 65 Spare parts catalog 125 LD 125 LD 12,00P 66 Spare parts catalog 150 D-LD 125 LD der.150 D-LD, 125 LD der. 12,00P 67 Spare parts catalog 125 E 125 E 12,00P 68 Spare parts catalog 125 F 125 F 12,00P 69 Spare parts catalog175 TV I series 175 TV I seriea 12,00

Instructions for repair shopsCode Description Model Price Code Description Model Price

P 80 Workshop manual 125 C-LC 125 C-LC 15,00P 81 Workshop manual 125 D-LD 125 D-LD 15,00P 90 Workshop manual 125 E-F 125 E-F 15,00P 82 Workshop manual 150 D-LD-125 LD der. '56 150 D-LD-125 LD der.'56 15,00P 83 Workshop manual 125-150 LD '57 (agg. del P 82) 125-150 LD'57 15,00P 84 Workshop manual 175 TV I serie 175 TV I series 15,00

P 85 Workshop manual 125-150 LI I serie 125-150 LI I series 15,00P 86 Workshop manual LI-TV IIs. con agg. for LI-TV IIIs. All LI-TV II and III series 15,00P 87 Workshop manual Serie Junior 50-100-125 All Junior 15,00P 88 Workshop manual Lui 50-75 Lui 50-75 15,00P 89 Workshop manual 48 moped moped 48 12,00

P 60

P 86P 38

P 76 Spare parts catalogue 125-150 LI 1 125-150 LI I series 12,00P 70 Spare parts catalog 125-150 LI / 175 TV II series 125-150 LI / 175 TV II series 12,00P 71 Spare parts catalog 125-150 LI IIIs.-175 TV IIIs.-S-SX All LI-TV IIIs. / S-SX 200 15,00P 72 Spare parts catalog 125-150-200 DL All DL 15,00P 73 Spare parts catalog Serie Junior 50-100-125 All Junior 15,00P 74 Spare parts catalog Lui 50-75 Lui 50-75 15,00P 75 Spare parts catalog 48 moped moped 48 12,00P 77 Spare parts catalogue 125LC 125 FC 15,00P 78 Spare parts catalogue 125 FD 125 FD 15,00P 79 Spare parts catalogue 150 FD 150 FD 15,00

PB 2 (it) - PB 3 (uk): Innocenti Lambretta:This is the 5th edition of typical book about the story of the complete Innocenti motorcycle manufacture from1947 to 1971. It has a hard back cover and contains a chapter dedicated to Lambretta’s and Lambro’sadvertisements. It’s a must have book for Lambretta’s apprentices.It’a 274 pages colour (or black and withe) book available in Italian (PB2 - € 35) and English (PB3 - € 38).

Books

PB4(it) - PB5 (uk): Restauration HandbookA practical handbook about Lambretta helpful in order not to make mistakes during the restauration. All thegalvanic and aesthetic treatments, technical variations among different versions and the principal datas fora perfect fine tuning are specified for every model.80 pages colour and black and white book available in Italian (PB 4 - € 20) and English (PB5 - € 25).

Books

PB 6 (it-uk): Scooter&Lambretta MuseumThis is a book for people who wants to know the history of scooter in the world. It has hundreds ofphotographs and old documents aiming at illustrating the born and spread of this Lambreta all over the world.Every scooter is described with all its main characteristics and is illustrated with several colour images andoriginal advertisement ads: Lambretta, Vespa, Salsbury, Iso, Nibbio, Honda, Cushman, KTM are some of theprestigious brands in this book.258 colour pages available in Italian and English, € 30.

Books

PB 7: Two Lambretta catalogue of coloursAn interesting reprint of two catalogues of colours Innocenti publicized from 1959 to 1962. The colour samplewere made with spray gun, using original colours code. A book that will be appreciated by Lambretta lovers.€ 30.

PB 8 (it-uk): Lambretta 2 wheels of HappinesThe history of Lambretta told by hundreds of black and white photos taken from the Innocenti historical archive.From the manufacture to speed records, from national meetings to the most famous actors: Lambretta is themain character of this enthusiasmatic story. Twelve chapters of the book are about the Lambretta world from1940s to 1960s and are enriched with direct statements of people who lived those fantastic moments. A musthave book for the most devoted Lambretta riders! 356 pages rigorously in black and white available in Italianand English, € 40.

Books

PB 9 (it): Custom-built Lambretta: accessoriesAn intresting collection of all the most important Lambretta accessories catalogue, sold during the 1950sand 1960s in order to make the scooter prettier. There are Falbo, Ulma, Viganò and much more among themost famous firms. Hundreds of illustrations that represent the most various accessories, from thesupplementary petrol tank to the chrome bumper, from the integral shield to the tuned up silencer. 260 pages completely in black and white book available in Italian and English, € 40.

BooksPB 10 (it-uk): Lambretta. Illustrated guide to the identificationThe latest Vittorio Tessera’s publishing work, a complete guide that describes all the changes and variationsmade by Innocenti during the period of Lambretta manufacture. Every change is presented year by year witha short description, detailed photos before and after the change, original framework number. All the Innocentiofficial documents, kept at the Scooter&Lambretta Museum in Rodano, were consulted in order to fulfill thiswork, many Innocenti ex-workers were interviewed and hundreds of original and well- preserved Lambrettaswere examined. A special chapter is dedicated to the final production balance, with monthly manufacturecharts; a detailed guide will illustrate how to translate framework and engine numbers compared withproduction numbers in order to precisely calculate the manufacture date of Lambrettas.A 310 pages full colour book available in Italian and English, € 50.

Emblems

C 143 C 148 C 149

C 150 C 150/F C 151 C 152 C 153

C 154 C 156 C 157 C 158 C 159

C 159/S C 160 C 162 C 162/S

C 164 C 165 C 166 C 168 C 169

C 170 C 170/S C 171 C 171/B C 171/S

C 172 C 173 C 174 C 175 C 176

C 160/C

C 146 C 147

C 148/F

C 177 C 178 C 179

C 182 C 183 C 184 C 184/B C 185

C 186 C 186/B C 187 C 188

C 193 C 193/B C 195 C 196 C 197

C 198 C 199 C 201 C 202 - C 203 C 204

C 204/B C 206

C 215

C 207 C 208

C 209 C 211

C 181

C 180

C 229/CC 229

C 205

C 192

C 150/E C 162/E

C 185/B

C 177/SC 161/E

Electricals

E 184 E 182

E 252

E 134 E 150

E 151-s

E 254

E 131

E 184

E 145

E 180

E 61 E 50 E 61/B

E 1

E 20

E 31 E 38 E 39 E 52

Switch

E 24 E 27

E 43

E 9 E 14

E 21

E 44

E 9/B

E 28

E 11

E 26

E 63 E 64 E 65

E 49

E 72

E 81 E 87 E 91 E 94

Wiring looms

Mod. 150/LI seconda serie - SCHEMA IMPIANTO ELETTRICO (Postmodifica)(vale anche per modello 150 LI IIIa serie 1962)

(vale anche per 125 LI IIIa serie 1962)

Date post:	05-Mar-2016
Category:	Documents
Upload:	marcello-porcelli
View:	235 times
Download:	15 times

CasaLambretta - Spare Parts Catalogue 2013

Documents