Cases in Marketing Management 9 2008

8/3/2019 Cases in Marketing Management 9 2008

http://slidepdf.com/reader/full/cases-in-marketing-management-9-2008 1/39

Tuesday, August 19, 2008

Cases in Operations Management - 9

LIST OF ATTEMPTED QUESTIONS AND ANSWERS

Select The Blank

Question

This Question refers to the case of 'Narmada Electricals Ltd.' : The disposal of material was done

on ________ basis.Correct Answer

Weight

Your Answer

Weight

Select The Blank

QuestionThis Question refers to the case of 'National Engineering Co.' : GM commented that every

department in this company competes with others in matter of ________.

Correct AnswerInefficiency

Your Answer

Inefficiency

Select The Blank

Question

This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Delays in execution of project

leads to cost ________.Correct Answer

Overrun

Your AnswerOverrun

True/FalseQuestion

This Question refers to the case of 'Artwood Products' : It is necessary to keep stock of standard

furniture to cater to sudden requirement of the customers.

Correct Answer

TrueYour Answer

True

Multiple Choice Single Answer

QuestionThis Question refers to 'Automotive Gears Private Limited' : The company, for its various items,

has recently introduced the concept of :-

http://scdlpapers.blogspot.com/2008/08/cases-in-operations-management-9.html





Correct Answer

Economic lot sizeYour Answer

Economic lot size

Multiple Choice Multiple AnswerQuestion

This Question refers to the case of 'Narmada Electricals Ltd.' : Other material considered to be

scrap/obsolete is :-Correct Answer

Packing material , Maintenance spares , Parts/components

Your AnswerPacking material , Maintenance spares , Parts/components , Electric motors

True/False

Question

This Question refers to the case of 'Kerson Automobiles' : MD has agreed to carry outmodification of existing plant.

Correct AnswerTrue

Your Answer

True


Question

This Question refers to the case of Narmada Electricals Ltd.: G.M. recruited a senior purchasemanager, Mr. Sajid Durrani in the purchased department :-

Correct Answer

In view of need to procure parts/components for development in time

Your AnswerIn view of need to procure parts/components for development in time

Multiple Choice Single AnswerQuestion

This question refers to case on 'Morbay Engineering Works (MEW)' : Following was the

solution conceived by the Production Manager to the need of increasing production:-Correct Answer

Introduction of incentive scheme

Your Answer

Introduction of incentive scheme

Select The Blank

QuestionThis question refers to case on 'Morbay Engineering Works (MEW)' : Overtime must be

________ to guarantee the success of the wage incentive scheme.

Correct Answer



Eliminative

Your AnswerEliminative

Multiple Choice Multiple Answer

QuestionThis question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : If the Exhaust Manifold is

manufactured in house, following costs wll increase:-

Correct AnswerCost of power , Cost of labour , Cost of consumables like grease, lubricant

Your Answer

Cost of power , Cost of labour , Cost of consumables like grease, lubricant , Fixed overheads


Question

This Question refers to the case of 'The Geer Company' : The purchase of steel was done

exclusively by :-Correct Answer

One buyerYour Answer

One buyer


Question

This Question refers to the case of 'Kerson Automobiles' : Cars are manually pushed over the

wooden stand placed in the major repairs section because of :-Correct Answer

Absence of the underground pit

Your Answer

Absence of the underground pit

True/False

QuestionThis question refers to case on 'Morbay Engineering Works (MEW)' : Under Scanlon Plan

employee is paid incentive bonus based on individual efforts and additional output.

Correct AnswerTrue

Your Answer

True

True/False

Question

This Question refers to the case of 'The Geer Company' : During the period of rapid expansion, itbecame necessary to subcontract a significant volume of machining operations.

Correct Answer

True



Your Answer

True


Question

This Question refers to the case of 'K.T Gears' : The groove cutting operation is performed at the:-

Correct Answer

Capston latheYour Answer

Capston lathe


Question

This question refer to the case on "Allied Industries Pvt Ltd" : Following cost element is

considered while calculating total cost of buying :-

Correct AnswerTransport cost

Your AnswerTransport cost


This Question refers to the case 'Indus Foundries Ltd.' :Following items are readily available at

all the three locations :-

Correct AnswerRaw materials , Scrap , Foundry chemicals

Your Answer

Raw materials , Scrap , Foundry chemicals , Manpower

Match The Following

Question

Correct AnswerYour Answer

Capacity cost

Unabsorbed overheadsUnabsorbed overheads

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Power cost

Variable over head

Variable over headSetup cost

Fixed labour cost

Marginal costMaterial cost

Direct cost

Direct cost





This Question refers to the case of 'Artwood Products' : Entire shop floor was ________ due to

piles of work in progress.Correct Answer

Congested

Your Answer

Congested


QuestionThis Question refers to the case of 'Hansa Tractomotive Ltd.' : The machines were completed by

Kay Jee :-

Correct AnswerWithin the stipulated delivery period

Your Answer

Within the stipulated delivery period

Select The Blank Question

This Question refers to the case of 'Kerson Automobiles' : The pedestal grinder mounted on thehuge work table, gives out ________ and blows out dust.

Correct Answer

SparksYour Answer

Sparks


This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Process sheet for exhaust manifold

provides following information:-

Correct AnswerJigs and fixtures required

Your Answer

Utilization of machine planned


QuestionThis question refers to case on Uma Tools Pvt Ltd (UTPL)' : Presently the raw castings are

procured by UTPL and given to machining to three vendors. If UTPL has to manufacture

Exhaust Manifold in house it would have to provide one of the following:

Correct AnswerNew jigs and fixtures

Your Answer

New jigs and fixtures

Match The Following

Question



Correct Answer

Your AnswerMechanics going to clerk with requisition

Get the replacements authorization

Get the replacements authorization

This Question refers to the case of 'Kerson Automobiles' : Loss of productive timeObtaining replacement of spares from stores

Obtaining replacement of spares from stores

Transfer of parts from work table to a hand trolley and pushing it out to the service bayBlowing off parts clean with compressed air

Blowing off parts clean with compressed air

Space for storage of seats inside the workshopAvoid wasteful movements

Avoid wasteful movements


QuestionThis Question refers to the case of 'The Irate Vendor' : The old supplier :-

Correct AnswerHas been supplying for over 30 years , Does not understand why he has been cut off , Does not

understand why no chance has been given to him to discuss his bid

Your AnswerHas been supplying for over 30 years , Does not understand why he has been cut off , Does not

understand why no chance has been given to him to discuss his bid , Is always asked his opinion

about quantity to be ordered

True/False

Question

This Question refers to the case of 'K.T Gears' : The activities performed by the operator are

listed on the practitioner's data sheet.Correct Answer

True

Your AnswerTrue

True/FalseQuestion

This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen noticed that

each worker was provided with the drawing of the component.

Correct AnswerFalse

Your Answer

False

Select The Blank

Question



This Question refers to the case of 'Northern Machinery Limited' : The V.P. instructed Materials

Manager to collect ________ information and evidence to clarify that their system is foolproof.Correct Answer

Relevant

Your Answer

Relevant


QuestionThis Question refers to the case of 'Autogears Private Limited' : Work elements performed by a

gear shaving operator are :-

Correct AnswerLoad gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh with

cutter teeth , Unlock nut and remove gear from the mandrel

Your Answer

Load gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh with

cutter teeth , Unlock nut and remove gear from the mandrel , Raise oil guard and switch on themachine


Question

This Question refers to the case of 'Artwood Products' : The cost of manufacturing has increaseddue to :-

Correct Answer

Blockage of funds in inventory , Longer manufacturing cycle time , Poor quality of products

Your AnswerBlockage of funds in inventory , Longer manufacturing cycle time , Poor quality of products ,

Non availability of skilled labour


This Question refers to the case of 'K.T Gears' : The cycle time per piece to perform the set of

activities listed adds up to ________.Correct Answer

2.30 minutes

Your Answer2.30 minutes

Select The Blank

QuestionThis Question refers to the case of 'Universal Fasteners Ltd.' : Personnel Officer Mr. Sinha

informed Mr. Kaul that Employee ________ is very high.

Correct AnswerTurnover

Your Answer

Turnover




This Question refers to the case of 'National Engineering Co.' : As per GM, the route cause of

this non-sensical situation is lack of :-

Correct AnswerCo-ordination

Your Answer

Co-ordination


QuestionThis Question refers to the case of 'The Geer Company' : The company had a small foundry until

1946. This was subsequently closed and the purchase of ferrous castings were handled by :-

Correct Answer

A man who had been a supervisor in the foundry

Your AnswerA man who had been a supervisor in the foundry


Question

This question refers to case on 'Morbay Engineering Works (MEW)' : An incentive plan can beconsidered as a tool for following:-

Correct Answer

Increase productivity , Create more capacity , Reduce manufacturing costs

Your AnswerIncrease productivity , Create more capacity , Reduce manufacturing costs , Increase sales

True/False

QuestionThis question refers to 'Automotive Gears Private Limited' : The table given in the case study

gives approximate machine hour rate for each indicated machine.

Correct AnswerTrue

Your Answer

True

Select The Blank

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : To manufacture exhaust Manifildin-house additional capacity is required. Extra capacity can be generated at UTPL by additional

________.

Correct AnswerShift

Your Answer

Shift



True/FalseQuestion

This Question refers to the case of 'Universal Fasteners Ltd.' : Mr. Sharma, Production Engineer

informed Mr. Kaul that Hardening & Tempering was the last operation.

Correct AnswerTrue

Your Answer

True


QuestionThis Question refers to the case of 'K.T Gears' : The firm is :-

Correct Answer

A proprietary firm , Engaged in manufacture of spur gears , Engaged in manufacture of helical

gear

Your AnswerA proprietary firm , Engaged in manufacture of spur gears , Engaged in manufacture of helical

gear , Engaged in manufacture of cutting gears


QuestionThis question refer to the case on "Allied Industries Pvt Ltd" : Following are cost elements of

make indicator :-

Correct Answer

Transport cost , Tooling cost , Indirect Employee costYour Answer

Transport cost , Tooling cost , Indirect Employee cost , Power cost

True/FalseQuestion

This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen was

informed by Mr. Ravikant, Materials Manager that counting is not necessary at every stage asthey count at the initial stage and since their workers and supervisors are experienced, they can

easily identify the components at each stage of production.

Correct AnswerTrue

Your Answer

True

True/False

Question

This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Project duration can always bereduced by deploying additional recourses.

Correct Answer

False



Your Answer

False

at 6:32 AM 0 comments Links to this post

Labels: Cases in Operations Management (Set II)



Select The Blank

Question

This Question refers to the case of 'Northern Machinery Limited' : M.D. has asked for ________from the Vice President.

Correct Answer

ExplanationYour AnswerExplanation


This Question refers to the case of 'Artwood Products' : The ________ furniture is sold through

distributors.Correct Answer

Standard

Your Answer

Standard

Select The Blank

QuestionThis Question refers to the case of 'Divgi Metalwares Private Limited' : The company has

finalized the order for manufacture of a ________ driven gear.

Correct Answer

SpeedmeterYour Answer

Speedmeter


This Question refers to the case of 'National Engineering Co' : As per Mr. Khanna( Planning

Manager) sales plans are changed :-Correct Answer

Overnight

Your AnswerOvernight



https://www.blogger.com/comment.g?blogID=7377623655471138589&postID=8660462072579204140


http://scdlpapers.blogspot.com/2008/08/cases-in-operations-management-9.html#links


http://www.blogger.com/email-post.g?blogID=7377623655471138589&postID=8660462072579204140

http://scdlpapers.blogspot.com/search/label/Cases%20in%20Operations%20Management%20%28Set%20II%29














This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : project planning/scheduling

techniques are called by following names:-

Correct AnswerCPM , PERT , Network Analysis

Your Answer

CPM , PERT

Select The Blank

QuestionThis Question refers to the case of 'Hansa Tractomotive Ltd.' : The loss of consignment was

________.

Correct Answer

Total

Your AnswerPartial

True/False

Question

This Question refers to the case 'Quality Gauges Pvt. Ltd.' : The executives were entitled forincentive bonus.

Correct Answer

True

Your AnswerFalse


QuestionThis Question refers to the case 'Suyog Udyog' : The process involves the use of :-

Correct Answer

HMT M-2V machine , HMT-2U machine , Investa Pillar drillYour Answer

HMT M-2V machine , HMT-2U machine , Investa Pillar drill


Question

The question refer to the case on 'Kalpak Engineers' : Process sheet does not provide following

data:-Correct Answer

Shift

Your AnswerShift




Question

This Question refers to the case 'Quality Gauges Pvt. Ltd.' : The consultant made followingrecommendations :-

Correct Answer

Creation of industrial engineering department , Methods improvement & fixation of performance

standards , Introduction of incentive schemeYour Answer


standards , Introduction of incentive scheme

True/False

QuestionThis Question refers to the case of 'K.T Gears' : The activities performed by the operator are

listed on the practitioner's data sheet.

Correct Answer

True

Your AnswerTrue

True/False

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : It is economical to continuesubcontracting the machining of Exhaust Manifold to vendors.

Correct Answer

False

Your AnswerFalse


QuestionThis Question refers to the case of 'Hansa Tractomotive Ltd.' : After completion of

manufacturing, Jay Jee took following actions :-

Correct AnswerDispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced

amount , Did not send the consignment by Hansa's designated carrier

Your AnswerDispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced



This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen observed

that the Machine Shop was looking ________.Correct Answer

Congested

Your Answer



Congested


Question

This question refers to case on Uma Tools Pvt Ltd (UTPL)' : Procurement cost per order is

computed on the basis of following data:Correct Answer

Order cost , No of vendors , Frequency of ordering

Your AnswerOrder cost , No of vendors , Unit price of the item


This Question refers to the case 'Indus Foundries Ltd.':The location of plant has been narrowed

down to following locations :-

Correct Answer

Kolhapur , Ahmedabad , CoimbatoreYour Answer

Coimbatore , Kolhapur , Ahmedabad


QuestionThis Question refers to the case 'Suyog Udyog' : Balancing weights are manufactured using

facilities arranged in :-

Correct Answer

Process type of layoutYour Answer

Process type of layout

Match The FollowingQuestion

Correct Answer

Your AnswerShop floor mangers pressurized to give

Overtime

OvertimeThis Question refers to the case 'Quality Gauges Pvt. Ltd.' : Qualifying amount shall be raised

with

Increase in sales price

Increase in sales priceIncentive will be paid on

Basic salary of each employee

Basic salary of each employeeBasis of payment on

Total output in terms of value of production

Total output in terms of value of production



True/FalseQuestion

This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Project duration can always be

reduced by deploying additional recourses.

Correct AnswerFalse

Your Answer

True


QuestionThis Question refers to the case of 'Classic Engineering Components Ltd.' : Customers

complaints were on the rise, mainly due to :-

Correct Answer

Delay in deliveries

Your AnswerDelay in deliveries


Question

This Question refers to the case of 'Artwood Products' : Mr. Dilip Tahil who founded thecompany initially focused on :-

Correct Answer

Custom built furniture

Your AnswerCustom built furniture


QuestionThis Question refers to the case of 'Classic Engineering Components Ltd.' : The company

supplies components to :-

Correct AnswerAutomobile industries , Printing machines , Machine tool & process equipment industries

Your Answer

Automobile industries , Printing machines , Machine tool & process equipment industries


Question

This Question refers to the case of 'Artwood Products' : The cost of manufacturing has increaseddue to :-

Correct Answer

Blockage of funds in inventory , Longer manufacturing cycle time , Poor quality of productsYour Answer

Blockage of funds in inventory , Longer manufacturing cycle time , Poor quality of products



True/False

QuestionThis Question refers to the case of 'Universal Fasteners Ltd.' : The organization has reputation

for poor deliveries.

Correct Answer

FalseYour Answer

False


Question

This question refers to case on 'Morbay Engineering Works (MEW)' : The Scanlon plan forincentive payment is useful for the organizations of following characteristic:-

Correct Answer

Highly labour intensive

Your Answer



This question refers to case on 'Morbay Engineering Works (MEW)' : In Scanlon Plan all

employees receive guaranteed ________ wages.Correct Answer

Time

Your Answer

Time

True/False

Question

This Question refers to the case of 'Autogears Private Limited' : It takes 0.2 minutes to measuredimensions and set aside gear into the trolley.

Correct Answer

TrueYour Answer

False

True/False

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : As extra capacity can be generated

by starting an additional shift, hence fixed overheads are sizable.Correct Answer

False

Your AnswerTrue




Question

This Question refers to the case of 'Autogears Private Limited' : The management is interested inthe following :-

Correct Answer

Improved method of working

Your AnswerImproved method of working


This Question refers to the case 'Indus Foundries Ltd.' :Following items are readily available at

all the three locations :-Correct Answer

Raw materials , Scrap , Foundry chemicals

Your Answer


Select The Blank

QuestionThis Question refers to the case of 'The Geer Company' : The volume of growth tripled due to

________ management.

Correct AnswerAggressive

Your Answer

Aggressive

Match The Following

Question

Correct Answer

Your AnswerResponsibility for Monthly report on any rejected/obsolete/non-moving items

Production /Marketing department

Production /Marketing departmentThis Question refers to the case of 'Narmada Electricals Ltd.' : Decision whether material is

obsolete or otherwise

Store ManagerStore Manager

Disposal of waste/obsolete material

Once a year

Once a yearStorage of scrap material in scrap yard

Without identification or any records of quantities


Select The Blank

Question



This Question refers to the case 'Suyog Udyog' : Number of work stations are to be decided

based on assumption that monthly off take is ________ numbers.Correct Answer

8000

Your Answer

8000


QuestionThis question refers to case on 'Morbay Engineering Works (MEW)' : Incentive schemes can not

be considered to be a substitute of the following:-

Correct AnswerPoor management

Your Answer

Low productivity

True/FalseQuestion

This Question refers to the case of 'Narmada Electricals Ltd.' :The rates of scrap were reviewedfrom time to time.

Correct Answer

FalseYour Answer

False

True/FalseQuestion

This Question refers to the case 'Suyog Udyog' : The operation time for C' sunk 14 dia holes on

both sides is 0.50 per piece.

Correct AnswerTrue

Your Answer

True


QuestionThis Question refers to the case of 'Kerson Automobiles' : It was decided to modify the existing

layout of the plant in the year :-

Correct Answer

1972Your Answer

1972


Question

This Question refers to the case 'Quality Gauges Pvt. Ltd.' : Incentive scheme was finalized



based on :-

Correct AnswerMonthly sales

Your Answer

Monthly production

Select The Blank

Question

This Question refers to the case of 'Artwood Products' : Entire shop floor was ________ due topiles of work in progress.

Correct Answer

CongestedYour Answer

Congested


QuestionThis question refer to the case on "Allied Industries Pvt Ltd" : The company should continue

current practice of subcontracting thread rolling operation if :-Correct Answer

Cost to buy is lower than cost to make

Your AnswerCost to buy is lower than cost to make

True/False

QuestionThis Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen noticed that

each worker was provided with the drawing of the component.

Correct Answer

FalseYour Answer

False


Question

This Question refers to the case of 'The Gujrat Engineering company Limited' : The company hasreceived a special order where :-

Correct Answer

A special cylinder is to be manufactured. , The item is to be manufactured from a hollow bored

forging , Fastest delivery is requestedYour Answer


forging , Fastest delivery is requested


Question



This Question refers to the case of 'Northern Machinery Limited' : The V.P. asked Material

Manager to prepare short report to be presented to board of directors about :-Correct Answer

Buying policies

Your Answer

Buying policies


QuestionThis Question refers to the case of 'Eagle Machine Company' : Manufacturing Manager handles

:-

Correct AnswerProduction , Inventory control , Receiving

Your Answer

Production , Inventory control , Receiving


This Question refers to the case of 'Autogears Private Limited' : Work elements performed by agear shaving operator are :-

Correct Answer

Load gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh withcutter teeth , Unlock nut and remove gear from the mandrel

Your Answer

Load gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh with


Select The Blank

Question

This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Delays in execution of projectleads to cost ________.

Correct Answer

OverrunYour Answer

Overrun

Select The Blank

Question

This question refer to the case on "Allied Industries Pvt Ltd" : Allied Industries Pvt ltd is a small

________ concern with 25 workmen.Correct Answer

Proprietary

Your AnswerProprietary


















Select The Blank

QuestionThis Question refers to the case of 'Northern Machinery Limited' : M.D. has asked for ________

from the Vice President.

Correct Answer

ExplanationYour Answer

Explanation

Select The Blank

QuestionThis Question refers to the case of 'Artwood Products' : The ________ furniture is sold through


Standard

Your AnswerStandard

Select The Blank

QuestionThis Question refers to the case of 'Divgi Metalwares Private Limited' : The company has

finalized the order for manufacture of a ________ driven gear.Correct Answer

SpeedmeterYour Answer

Speedmeter


Question

This Question refers to the case of 'National Engineering Co' : As per Mr. Khanna( PlanningManager) sales plans are changed :-

Correct Answer

OvernightYour AnswerOvernight


QuestionThis question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : project planning/scheduling

techniques are called by following names:-











Correct Answer

CPM , PERT , Network AnalysisYour Answer

CPM , PERT


This Question refers to the case of 'Hansa Tractomotive Ltd.' : The loss of consignment was

________.Correct Answer

Total

Your AnswerPartial

True/False

Question


Correct AnswerTrue

Your Answer

False


Question

This Question refers to the case 'Suyog Udyog' : The process involves the use of :-Correct Answer


Your Answer



QuestionThe question refer to the case on 'Kalpak Engineers' : Process sheet does not provide following

data:-

Correct AnswerShift

Your Answer

Shift


Question

This Question refers to the case 'Quality Gauges Pvt. Ltd.' : The consultant made followingrecommendations :-

Correct Answer





Your AnswerCreation of industrial engineering department , Methods improvement & fixation of performance


True/FalseQuestion

This Question refers to the case of 'K.T Gears' : The activities performed by the operator are

listed on the practitioner's data sheet.Correct Answer

True

Your AnswerTrue

True/False

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : It is economical to continuesubcontracting the machining of Exhaust Manifold to vendors.

Correct AnswerFalse

Your Answer

False


Question

This Question refers to the case of 'Hansa Tractomotive Ltd.' : After completion of manufacturing, Jay Jee took following actions :-

Correct Answer

Dispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced

amount , Did not send the consignment by Hansa's designated carrierYour Answer

Dispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced


Select The Blank

QuestionThis Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen observed

that the Machine Shop was looking ________.

Correct Answer

CongestedYour Answer

Congested


Question

This question refers to case on Uma Tools Pvt Ltd (UTPL)' : Procurement cost per order is



computed on the basis of following data:

Correct AnswerOrder cost , No of vendors , Frequency of ordering

Your Answer

Order cost , No of vendors , Unit price of the item


Question

This Question refers to the case 'Indus Foundries Ltd.':The location of plant has been narroweddown to following locations :-

Correct Answer

Kolhapur , Ahmedabad , CoimbatoreYour Answer

Kolhapur , Ahmedabad , Coimbatore

True/False

QuestionThis Question refers to the case of 'Universal Fasteners Ltd.' : The organization has reputation

for poor deliveries.Correct Answer

False

Your AnswerFalse


QuestionThis question refers to case on 'Morbay Engineering Works (MEW)' : The Scanlon plan for

incentive payment is useful for the organizations of following characteristic:-

Correct Answer

Highly labour intensiveYour Answer


Select The Blank

Question

This question refers to case on 'Morbay Engineering Works (MEW)' : In Scanlon Plan allemployees receive guaranteed ________ wages.

Correct Answer

Time

Your AnswerTime

True/FalseQuestion

This Question refers to the case of 'Autogears Private Limited' : It takes 0.2 minutes to measure

dimensions and set aside gear into the trolley.



Correct Answer

TrueYour Answer

False

True/FalseQuestion

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : As extra capacity can be generated

by starting an additional shift, hence fixed overheads are sizable.Correct Answer

False

Your AnswerTrue


Question

This Question refers to the case of 'Autogears Private Limited' : The management is interested inthe following :-

Correct AnswerImproved method of working

Your Answer

Improved method of working


Question

This Question refers to the case 'Indus Foundries Ltd.' :Following items are readily available atall the three locations :-

Correct Answer


Your AnswerRaw materials , Scrap , Foundry chemicals


This Question refers to the case of 'The Geer Company' : The volume of growth tripled due to

________ management.Correct Answer

Aggressive

Your Answer

Aggressive

Match The Following

QuestionCorrect Answer

Your Answer

Responsibility for Monthly report on any rejected/obsolete/non-moving items



Production /Marketing department

Production /Marketing departmentThis Question refers to the case of 'Narmada Electricals Ltd.' : Decision whether material is

obsolete or otherwise

Store Manager

Store ManagerDisposal of waste/obsolete material

Once a year

Once a yearStorage of scrap material in scrap yard



Select The Blank

Question

This Question refers to the case 'Suyog Udyog' : Number of work stations are to be decided

based on assumption that monthly off take is ________ numbers.Correct Answer

8000Your Answer

8000


Question

This question refers to case on 'Morbay Engineering Works (MEW)' : Incentive schemes can not

be considered to be a substitute of the following:-Correct Answer

Poor management

Your Answer

Low productivity

True/False

QuestionThis Question refers to the case of 'Narmada Electricals Ltd.' :The rates of scrap were reviewed

from time to time.

Correct AnswerFalse

Your Answer

False

True/False

Question

This Question refers to the case 'Suyog Udyog' : The operation time for C' sunk 14 dia holes onboth sides is 0.50 per piece.

Correct Answer

True



Your Answer

True


Question

This Question refers to the case of 'Kerson Automobiles' : It was decided to modify the existinglayout of the plant in the year :-

Correct Answer

1972Your Answer

1972


Question

This Question refers to the case 'Quality Gauges Pvt. Ltd.' : Incentive scheme was finalized

based on :-

Correct AnswerMonthly sales

Your AnswerMonthly production


This Question refers to the case of 'Artwood Products' : Entire shop floor was ________ due to

piles of work in progress.

Correct AnswerCongested

Your Answer

Congested


Question

This question refer to the case on "Allied Industries Pvt Ltd" : The company should continuecurrent practice of subcontracting thread rolling operation if :-

Correct Answer

Cost to buy is lower than cost to makeYour Answer

Cost to buy is lower than cost to make

True/FalseQuestion

This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen noticed that

each worker was provided with the drawing of the component.Correct Answer

False

Your Answer



False


Question

This Question refers to the case of 'The Gujrat Engineering company Limited' : The company has

received a special order where :-Correct Answer


forging , Fastest delivery is requestedYour Answer


forging , Fastest delivery is requested


Question

This Question refers to the case of 'Northern Machinery Limited' : The V.P. asked Material

Manager to prepare short report to be presented to board of directors about :-Correct Answer

Buying policiesYour Answer

Buying policies


Question

This Question refers to the case of 'Eagle Machine Company' : Manufacturing Manager handles

:-Correct Answer


Your Answer



QuestionThis Question refers to the case of 'Autogears Private Limited' : Work elements performed by a

gear shaving operator are :-

Correct AnswerLoad gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh with


Your Answer

Load gear on mandrel and secure it with a nut , Raise bed to enable gear teeth to mesh withcutter teeth , Unlock nut and remove gear from the mandrel


This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Delays in execution of project

leads to cost ________.



Correct Answer

OverrunYour Answer

Overrun


This question refer to the case on "Allied Industries Pvt Ltd" : Allied Industries Pvt ltd is a small

________ concern with 25 workmen.Correct Answer

Proprietary

Your AnswerProprietary






QuestionThis Question refers to the case of 'Hansa Tractomotive Ltd.' : After completion of

manufacturing, Jay Jee took following actions :-

Correct Answer

Dispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoicedamount , Did not send the consignment by Hansa's designated carrier

Your Answer

Did not send the consignment by Hansa's designated carrier , Dispatched the consignment byExpress Roadlines by truck , Raised the Hundi for the invoiced amount


QuestionThis Question refers to the case of 'Universal Fasteners Ltd.' : During the meeting with G.M (Mr.

Kaul) Store Keeper Mr. Bapat informed that purchases were made from :-

Correct Answer

Several sourcesYour Answer

Several sources


Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : One of the following is not avariable overhead:-





















Correct Answer

SpaceYour Answer

Space

True/FalseQuestion

This Question refers to 'Uday Electroplating Shop' : As per cost figures collected, Expected

volume of work on special equipment next year is 10,000 Nos.Correct Answer

True

Your AnswerTrue


Question

This Question refers to the case of Narmada Electricals Ltd.: In the existing method, the scarpgenerated in processes like machining was stored in :-

Correct AnswerScrap yard

Your Answer

Scrap yard

Match The Following

Question

Correct AnswerYour Answer

Anonymous letter received by M.D.

Need to justify

Need to justifyThis question refers to the case of 'Northern Machinery Ltd.' : Senior buyers

Seen in top hotels with suppliers

No material facts to support the argumentsReason for failure to convince the Board of Directors

No material facts to support the arguments

No confidence in Material manager and Senior buyersLot of items on the agenda

Need to be concise and to the point

Need to be concise and to the point


Question

This Question refers to the case of 'Divgi Metalwares Private Limited' : The new itemscontracted by the company are handled by the development department for :-

Correct Answer

Submission of samples , Manufacture of one or two production lots , Transfer to manufacturing



department for regular production, after successful development

Your AnswerSubmission of samples , Manufacture of one or two production lots , Transfer to manufacturing

department for regular production, after successful development


This Question refers to the case of 'Classic Engineering Components Ltd.' : The company has

well established machine shop having more than 150 machines and :-Correct Answer

A heat treatment shop , Metrology section , Packing section

Your AnswerA heat treatment shop , Metrology section , Packing section


Question

This Question refers to the case of 'The Gujrat Engineering company Limited' : The companyalso executes :-

Correct AnswerRush orders

Your Answer

Rush orders

Select The Blank

Question

This Question refers to 'Uday Electroplating Shop' :The owner finds it ________ to get part timeemployees when there is heavy work load.

Correct Answer

Difficult

Your AnswerDifficult


The question refer to the case on 'Kalpak Engineers' :Kalpak Engineers have contracted from a

boiler company manufacturing of 500 nos of stay bolt. In the manufacturing process grindingoperation is carried out on following machine :-

Correct Answer

Cylindrical grinder

Your AnswerCylindrical grinder


This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Process sheet for exhaust manifold

provides following information:-



Correct Answer

Jigs and fixtures requiredYour Answer

Jigs and fixtures required


This Question refers to the case of 'Classic Engineering Components Ltd.' : The company

supplies components to :-Correct Answer

Automobile industries , Printing machines , Machine tool & process equipment industries

Your AnswerAutomobile industries , Printing machines , Machine tool & process equipment industries

True/False

Question

This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen noticed thateach worker was provided with the drawing of the component.

Correct AnswerFalse

Your Answer

False


Question

This Question refers to the case of 'Eagle Machine Company' : Cost of running Sally'sdepartment is Rs 3,70,000 per year. This is on account of :-

Correct Answer

Salaries , Fringes , Expenses

Your AnswerSalaries , Fringes , Expenses


This Question refers to the case 'Quality Gauges Pvt. Ltd.' : After the introduction of scheme,

shop floor manager has complained of pressure from workmen for ________.Correct Answer

Overtime

Your Answer

Overtime

Match The Following

QuestionCorrect Answer

Your Answer

Test of viability of standards





Correct Answer

NegligibleYour Answer

Low


This Question refers to the case of 'Artwood Products' : The ________ furniture is sold through


Standard

Your AnswerStandard


Question

This Question refers to the case of 'Divgi Metalwares Private Limited' : It is a :-Correct Answer

Light engineering companyYour Answer

Light engineering company

True/False

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : The average efficiency on the other

components currently being produced is around 75%.Correct Answer

True

Your Answer

True


QuestionThis Question refers to the case 'Suyog Udyog' : The process involves the use of :-

Correct Answer

HMT M-2V machine , HMT-2U machine , Investa Pillar drillYour Answer



This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Jigs and fixtures once provided will

be able to maintain accuracy up to about ________ pieces.Correct Answer

20000

Your Answer



20000

True/False

Question

This question refers to case on 'Morbay Engineering Works (MEW)' : "It is difficult to install an

incentive scheme and easy to withdraw when desired."Correct Answer

False

Your AnswerTrue

True/FalseQuestion

This Question refers to the case 'Suyog Udyog' : The operation time for C' sunk 14 dia holes on

both sides is 0.50 per piece.

Correct Answer

TrueYour Answer

True


QuestionThis Question refers to the case of 'The Geer Company' : Problems got created due to :-

Correct Answer

Added work load in purchasing , Divided buying responsibilities , Number of inexperienced

buyersYour Answer

Added work load in purchasing , Divided buying responsibilities , Number of inexperienced

buyers


Question

This Question refers to the case 'Indus Foundries Ltd.': The company is faced with followingproblems :-

Correct Answer

Choice of LocationYour Answer

Choice of Plant machinery


This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Following is the information

requirement for using CPM/PERT techniques:-Correct Answer

List of activities , Activity duration , Precedent relationship of the activities

Your Answer



List of activities , Activity duration , Person responsible for activity completion


Question

This question refers to case on 'Morbay Engineering Works (MEW)' : The success of an

incentive plan to a large extent depends on the following factor:-Correct Answer

Quality of performance standard

Your AnswerProduction Planning and Control system


This question refers to case on 'Morbay Engineering Works (MEW)' : Following systems are

prerequisites for an incentive scheme:-

Correct Answer

Good production planning and control system , Good Inspection and quality control system ,Sound system of accounting operators daily output

Your AnswerGood production planning and control system , Good Inspection and quality control system ,

Sound system of accounting operators daily output

Select The Blank

Question

This Question refers to the case of 'K.T Gears' : The problem envisages determining the rate of

________ before and after improvement in the existing method.Correct Answer

Production

Your Answer

Speed


QuestionThis Question refers to the case of 'The Geer Company' : The problems reported are :-

Correct Answer

Delays in placing orders , Frequently late deliveries , Incorrect ordering quantitiesYour Answer

Delays in placing orders , Frequently late deliveries , Incorrect ordering quantities


This question refers to case on 'Morbay Engineering Works (MEW)' : Following practice if

prevalent, must be eliminated to guarantee success of wage incentive scheme :-Correct Answer

Overtime

Your Answer



Encashment of leave

True/False

Question

This Question refers to the case of 'Universal Fasteners Ltd.' : The organization has reputation

for poor deliveries.Correct Answer

False

Your AnswerFalse


This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Use of Network Techniques

beside computing project duration also helps in the following :-

Correct Answer

Possibilities of reducing project durationYour Answer

Computing manpower requirement


QuestionThe question refer to the case on 'Kalpak Engineers' : This case is concerned with following

element of production planning:-

Correct Answer

RoutingYour Answer

Scheduling


This Question refers to the case of 'Hansa Tractomotive Ltd.' : The machines were completed by

Kay Jee :-Correct Answer

Within the stipulated delivery period

Your AnswerWithin the stipulated delivery period

Select The Blank

QuestionThis Question refers to the case of 'Kerson Automobiles' : The pedestal grinder mounted on the

huge work table, gives out ________ and blows out dust.

Correct AnswerSparks

Your Answer

Sparks




This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : In machining Exhaust Manifold, no

cutting oil is required as the material is ________.

Correct AnswerCast iron

Your Answer

Plastic

Select The Blank

QuestionThis question refers to case on 'Morbay Engineering Works (MEW)' : Success of wage incentive

plans to a large extent depends on the ________ of performance standards.

Correct Answer

Quality

Your AnswerQuality

True/False

Question

This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : The cost of foundry reject is borneby the company.

Correct Answer

True

Your AnswerTrue

True/False

QuestionThis question refers to the case of 'Northern Machinery Ltd' : As per summary of purchases of

the last year, Material cost as a proportion of sales is 26%.

Correct AnswerFalse

Your Answer

True

True/False

Question


Correct Answer

TrueYour Answer

True



Select The Blank

QuestionThis Question refers to the case 'Suyog Udyog' : Number of work stations are to be decided

based on assumption that monthly off take is ________ numbers.

Correct Answer

8000Your Answer

8000

Date post:	06-Apr-2018
Category:	Documents
Upload:	adnan-buland-khan
View:	218 times
Download:	0 times

Cases in Marketing Management 9 2008

Documents