Anchoring Technology
Cast-in channels PEC-TA(-P)
European Technical AssessmentETA-16/0929
BESTPERFORMANCE
WITH NEWPEC-TA-P
PEC-TA(-P) Anchor Channels
Disclaimer
This European Technical Assessment is only valid for originalproducts manufactured by Hilti with specificationsdescribed in this document. It is your responsibility to verifythe suitability of a product for your specific application.
Allgemeine Hinweise
Diese Europäische Technische Bewertung gilt nur für Original-Produkte, die von Hilti mit den in diesem Dokumentbeschriebenen Spezifikationen hergestellt wurden. Es liegtin der Verantwortung des Anwenders, die Eignung einesProdukts für die spezifische Anwendung zu überprüfen
Z30078.20 8.06.01-88/20
European Technical Assessment
ETA-16/0929 of 19 May 2020
English translation prepared by DIBt - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment:
Deutsches Institut für Bautechnik
Trade name of the construction product Anchor channels (PEC-TA) with channel bolts (HBC)
Product family to which the construction product belongs
Anchor channels
Manufacturer PEC Europe GmbH Obere Kaiserswerther Straße 56 47249 Duisburg DEUTSCHLAND
Manufacturing plant Hilti Werke
This European Technical Assessment contains
27 pages including 3 annexes which form an integral part of this assessment
This European Technical Assessment is issued in accordance with Regulation (EU) No 305/2011, on the basis of
EAD 330008-03-0601
This version replaces ETA-16/0929 issued on 9 August 2018
European Technical Assessment ETA-16/0929 English translation prepared by DIBt
Page 2 of 27 | 19 May 2020
Z30078.20 8.06.01-88/20
The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and shall be identified as such.
Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may only be made with the written consent of the issuing Technical Assessment Body. Any partial reproduction shall be identified as such.
This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in particular pursuant to information by the Commission in accordance with Article 25(3) of Regulation (EU) No 305/2011.
European Technical Assessment ETA-16/0929 English translation prepared by DIBt
Page 3 of 27 | 19 May 2020
Z30078.20 8.06.01-88/20
Specific Part
1 Technical description of the product
The anchor channels (PEC-TA) with channel bolts (HBC) are a system consisting of C-shaped channel profile of carbon steel or stainless steel and at least two metal anchors non-detachably fixed to the channel back and channel bolts. The anchor channel is embedded surface-flush in the concrete. Channel bolts (HBC) with appropriate hexagon nuts and washers are fixed to the channel.
The product description is given in Annex A.
2 Specification of the intended use in accordance with the applicable European Assessment Document
The performances given in Section 3 are only valid if the anchor channel is used in compliance with the specifications and conditions given in Annex B.
The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor channel of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works.
3 Performance of the product and references to the methods used for its assessment
3.1 Mechanical resistance and stability (BWR 1)
Essential characteristic Performance Characteristic resistance under tension load (static and quasi-static loading)
See Annex A4, B3 and B5, C1 to C4 and C8
Characteristic resistance under shear load (static and quasi-static loading)
See Annex C6 to C9
Characteristic resistance under combined tension and shear (static and quasi-static loading)
See Annex C7
Characteristic resistance under cyclic fatigue tension load
No performance assessed
Displacements (static and quasi-static loading) See Annex C5 and C7 Durability See Annex B1
3.2 Safety in case of fire (BWR 2)
Essential characteristic Performance Reaction to fire Class A1 Characteristic resistance to fire See Annex C10
European Technical Assessment ETA-16/0929 English translation prepared by DIBt
Page 4 of 27 | 19 May 2020
Z30078.20 8.06.01-88/20
4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base
In accordance with EAD No. 330008-03-0601, the applicable European legal act is: [2000/273/EC].
The system to be applied is: 1
5 Technical details necessary for the implementation of the AVCP system, as provided for in the applicable EAD
Technical details necessary for the implementation of the AVCP system are laid down in the control plan deposited with Deutsches Institut für Bautechnik.
Issued in Berlin on 19 May 2020 by Deutsches Institut für Bautechnik
BD Dipl.-Ing. Andreas Kummerow beglaubigt: Head of Department Müller
Page 5 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 6 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 7 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 8 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 9 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 10 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 11 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 12 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 13 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 14 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 15 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 16 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 17 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 18 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 19 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 20 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 21 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 22 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 23 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 24 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 25 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 26 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Page 27 of European Technical Assessment ETA-16/0929 of 19 May 2020 English translation prepared by DIBt
Z30102.20 8.06.01-88/20
Euro
pean
Tec
hnic
al A
sses
smen
t M
ay 2
020
PEC Europe GmbH
Obere Kaiserswerther Straße 5647249 Duisburg / GermanyPhone: +49 (0) 203 - 45 65 99 0Fax: +49 (0) 203 - 45 65 99 [email protected]
www.pec-europe.com
For more information, please visit our website at www.pec-europe.com.