Date post: | 29-Jul-2015 |
Category: |
Internet |
Upload: | julio-alberto-mendoza-blas |
View: | 883 times |
Download: | 108 times |
Dear Customers:
We are pleased to introduce DIAMANTINA CHRISTENSEN trading company.
Diamantina Christensen is a newly formed company that represents the union of Christensen Chile S.A. and Boyles Bros. Diamantina S.A., leaders in the supply of geological exploration products. Each of these companies is well known and respected for their experience and commitment to quality and service.
Diamantina Christensen was founded in order to offer you the convenience of a one-stop shopping store in combination with our considerable manufacturing and logistic capabilities. Our goal is to serve our customers' needs with a complete line of diamond drilling tools and accessories.
Both the Chile and Peru plants are ISO 9001:2000 certified, thus assuring you the utmost in quality and consistency.
Along with this introduction letter, please find an overview of our manufacturing facilities and the latest Diamantina Christensen product catalog. This product catalog will serve to demonstrate to you just how fully equipped we are to fulfill all of your drilling supply needs.
Best Regards,
Humberto ArceGeneral Manager
Fernando ButtazzoniVice President
INTRODUCTION LETTER
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Valid From 02/18/2008Rev. 2
INTRODUCTION LETTER
Christensen Chile S.A.
Founded in 1964, Christensen Chile was formed under the principle of providing quality products and service at a fair price, thusly maximizing value.
Today, our modern industrial facilities and broad commercial platform gather the most prestigious representations in the mining industry's percussion, core and water well drilling markets worldwide.
Located in an industrial complex in Santiago, Christensen Chile's facilities cover a surface area of nearly 250,000 square feet. The industrial plant (of approximately 60,000 square feet) uses state-of-the-art technology and equipment to manufacture drill bits, rods, and spare parts to meet the requirements of today's demanding market.
Constant research and field work experience in diamond core and percussion drilling have permitted Christensen Chile to constantly improve its vast array of tools. Also, the experience gained through Christensen Chile's participation in these processes has made it possible to develop the most modern techniques for products required in the drilling and exploration industries worldwide.
IN NI GM
P SR TO CD U
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
INTRODUCTION LETTER
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Located on the outskirts of Lima Peru, in a 50,000 square foot facility, our manufacturing process is carried out using the latest in high tech equipment and procedures. Additionally, our highly qualified personnel frequently visit customer drilling sites to evaluate usage and performance of our products. This service not only helps our customers to better use our products, but also helps us to improve our products in order to better serve our customers needs. This combination of quality product, and quality service, lead to more successful drilling results for our customers.
Product quality is a priority for us, and our manufacturing technique is based on integrating work from all areas of our company as well as maintaining ongoing research and development.High quality products are further assured by the use of the finest in raw materials, and the latest advances in manufacturing equipment.
Boyles Bros Diamantina S.A.
Boyles Bros. Diamantina S.A. has long been a pioneer in the manufacturer of diamond products in Peru. Our fifty years of experience have allowed us to accumulate a great amount of knowledge about how to design diamond bits and tools that best suit given ground conditions.
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
DIAMANTINA CHRISTENSEN CONTACT INFORMATION
HUMBERTO ARCEGeneral Manager Office: 511 326-0494 Ext. [email protected]
EDUARDO RAMIREZSales Manager Office: 56 2 6207831 [email protected]
GUILLERMO WESTONProduction Manager Office: 511 326-0494 Ext. [email protected]
MARILU JUSCAMAITAForeign Trade RepresentativeOffice: 511 326-0494 Ext. [email protected]
Telf.: 562-6207800 (Chile) • 511-6186777 (Perú)Web site: www.diamantinachristensen.come-mail: [email protected]
A-1
TABLE OF CONTENTSDIAMOND PRODUCTS SECTION
SECTION A
Surface-Set Diamond Bits A-2
Impregnated Bits
Impregnated Bits Non-Standard Options
Casing Shoes
Reaming Shells
Available Sizes
Operational Parameters
Wear Patterns
A-3
A-5
A-6
A-7
A-8
A-9
A-10
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-2
SURFACE-SET DIAMOND BITS
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Picture 3: Available discharges configuration
Diamantina Christensen introduces the latest generation of surface-set diamond core bits utilized for the geological exploration industry
Ordering code:1. Bit size (Chart 1, page A-8)2. Diamond size (Picture 1)3. Crown profile (Picture 2)4. Discharge configuration (Picture 3)
Example:
• Surface-set diamond bit size HQ• 25 spc diamond size• Stepped crown profile• Face discharge for pilot core lifter case
HQ 25 spc Stepped profile Face discharge for pilot core lifter case
Bit SelectionROCK HARDNESS
VERY SOFT SOFT SOFT / MEDIUM MEDIUM MEDIUM / HARD
ROCK FEATURES
Very abrasive Medium Abrasiveness
Medium GrainCoarse Grain
Very Fractured Fractured Fractured to competent
10-15 spc
15-25 spc
25-40 spc
40-60 spc
Picture 1: Available diamond sizes
• For soft and clayey formations is recomended face discharge
• The higher rock hardness, the smaller diamond embbeded on the bit. The diamond stone size (Stones per carat [spc] ) available are
- 10/15 spc: Very soft to soft formations- 15/25 spc: Soft to soft medium formations- 25/40 spc: Soft medium to medium formations- 40/60 spc: Medium to medium hard formations
• The profiles available are:
Stepped profile crown (picture 2A): Good penetration and stability, not recommended in fractured formations.Pilot profile crown (picture 2B): Provides good stability to minimize hole deviation.Semi-round profile crown (picture 2C): Good strength in broken ground, requires high bit loads.
NOTE If the rock hardness is higher than 6 Mohs is preferable to use an impregnated bit
• Surface-set diamond bits are manufactured by the highest quality standards to give long service life and maximum penetration
• Diamonds are set in a pre-determined pattern on the working surfaces of the bit
• Appropiate for soft to medium formations due to the greater exposure of the individual diamond crystals.
• Outstanding performance in unconsolidated formations such as sandstone, gypsum, clay or talc.
All kind of surface-set diamond bits are available. In addition, all the orders are warmly accepted according to specific customer's requirements
Picture 2: Available crown profiles
STANDARD CORE LIFTER CASE PILOT CORE LIFTER CASE
A. REGULAR DISCHARGE B. FACE DISCHARGE C. FACE DISCHARGE
GENERAL DESCRIPTION
HOW TO SELECT A SURFACE-SET DIAMOND BIT?
HOW TO ORDER A SURFACE-SET DIAMOND BIT?
A. STEPPED PROFILE B. PILOT PROFILE C. SEMI-ROUND PROFILE
A-3
IMPREGNATED BITS
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
STEEL BODYPOWDERMETAL BONO
INDUSTRIALDIAMONDS GRIT
DIAMONDSINSERT
Diamantina Christensen introduces the latest generation of impregnated diamond core bits utilized for the geological exploration industry
• Matrix composed of a powdered metal bond and synthetic diamond embedded in a uniform distribution.
• Simple crown geometry that makes them less susceptible to in-hole damages than other types of cutting media.
• High perform in medium to hard formations.• Better tolerance to changing formations.• The abrasiveness and hardness of the formation is a critical
variable for the bit selection.• Low series bits would be used to drill a soft, abrasive,
unconsolidated formation such as Sandstone, Gypsum, Calcite or Talc.
• High series bits would be used to drill a hard, non-abrasive, consolidated formation such as Jasperite, Taconite, Quartz or Chert.
Keep in mind the following:
1. Rock characteristics (Picture 4, page A-4)2. Drill power (Series description, page A-4)
• Low power Higher series• High power Lower series
3. Penetration rate and bit life:• Slow penetration Higher series• Short bit life Lower series
Ordering code:4. Bit size (Chart 1, page A-8)5. Bit Series (Picture 4, next page)
Example:
• Impregnated bit size HQ• Series 4A• Regular discharge
NOTE If non-standard impregnated bits are required, please go to Options (page A-5)
All kind of impregnated bits are available. In addition, all the orders are warmly accepted according to specific customers requirements
HQ 4A
GENERAL DESCRIPTION
HOW TO SELECT AN IMPREGNATED BIT?
HOW TO ORDER AN IMPREGNATED BIT?
A-4
Picture 4: Available series for impregnated bits
Series 2A• For extremely abrasive and fractured formations.• Should be used on powerful drills with high torque and high
thrust capability.
Series 2• Multipurpose, durable and versatile bit.• Can be used with high bit load without risk of excessive
wear.
Series 3• For soft, very abrasive and fractured formations.• High penetration in formations that are subject to changes in
rock hardness and abrasiveness.
Series 4A• For soft to medium, abrasive and fractured formations.• The excessive load can significantly reduce bit life.
Series 6B• Perform exceptionally well in formations that are subject to
changes in rock hardness and abrasiveness.• Versatile bit with high lifetime and above average
penetration rate.
Series 7• Variable formations tending to medium hardness.• Long lifetime with high torque and push toleration.
Series 7B• High performance in hard conditions.• High penetration and lower power required.
Series 7F• High performance in formations that are subject to changes
in rock hardness and abrasiveness.• Should be used on powerful drills with high torque and high
thrust capability.
Series 8• Long lifetime in changing formations.• High torque and push resistance.
Series 8B• High penetration and lower power required.• Reduced bit pressures while maintaining or improving bit life.
Series 8C• Versatile series for hard formations (7 to 9 series
characteristics).• High penetration for medium formations.
Series 9C• For hard to very hard formations.• Light fractured and abrasive toleration.
Series 9D• High penetration in a variety of formations.• Good for hard formations with hard competent and
fractured non abrasive sections.
Series 10A• Standard series for extremely hard formations. • Needs high rotational speed and low bit pressure.
Series 10C• High penetration for extremely hard, with slightly fractured
parts, formations.• Suitable for semi competent and competent non abrasive
formations.
Series 10D• High penetration for extremely hard and competent
formations.• Suitable for competent and non abrasive formations
Series 10E• High penetration for extremely hard, with fractured abrasive
parts, formations. • High performance for semi competent and slightly abrasive
formations.
Series 11• High penetration for extremely hard and competent
formations.• For use specially with non powerful drill rigs.
ROCK CHARACTERISTICS EXAMPLES SERIES DESCRIPTION
VERY HARD / FRACTUREDTERRAIN
ROCK PROPERTIES
SERIES SELECTION TABLE
EXTREMELY ABRASIVE, COARSE GRAIN SIZE; SOFT TOVERY HARD, HIGHLY FRACTURED, FAULTS AND SLIDES
LIMESTONE, SANDSTONE,CONGLOMERATE
2A
2
4A
3
6B
7
7B
7F
8
8B
8C
9C
9D
10A
10C
10D
11
10E
STANDARD
STANDARD
VERY ABRASIVE / FRACTURED TERRAIN
STANDARD
STANDARD
HIGH PENETRATION
VERSATILE
ABRASIVE / FRACTUREDTERRAIN
STANDARD
VERSATILE, SERIES 7 TO 9
STANDARD
HIGH PENETRATION
HIGH PENETRATION FOR NONPOWERFUL DRILLS
HIGH PERFORMANCE INCHANGEABLE HARDNESS AND
ABRASIVENESS
HIGH PENETRATION
EXTREMELY HARD FORMATIONSOR FOR USE WITH NON
POWERFUL DRILLS
VERSATILE, SERIES 9 TO 11
PORPHYRY, GRANITE, GNEISS, GABRO
SANDSTONE, DOLOMITE, SCHISTS, SERPENTINE, SHALE,
TUFFS
GABRO, ANDESITE, BASALT
PEGMATITE, GABRO, MONZONITE, ANDESITE
DIORITE, TACONITE, GNEISS, GRANITE
CHERT, RHYOLITE, QUARTZ, JASPERITE,
IRONSTONE
SOFT TO MEDIUM, ABRASIVE, MEDIUM TO COARSE GRAIN SIZE, FRACTURED AND CRASHED
MEDIUM HARDNESS, ABRASIVE, MEDIUM TO COARSEGRAIN SIZE; FRACTURED
MEDIUM TO HARD, MODERATELY ABRASIVE, MEDIUMGRAIN SIZE, SOLID TO SLIGHTLY FRACTURED
HARD AND COMPACT FORMATION, FINE TO MEDIUMGRAIN SIZE, SOLID, LOW ABRASIVENESS
VERY HARD AND COMPACT FORMATION, FINE GRAIN SIZE, NO ABRASIVE
EXTREMELY HARD AND COMPACT FORMATION, VERY FINE GRAIN SIZE, NO ABRASIVE
CO
MPA
CT
FRA
CTU
RED
AB
RA
SIV
EN
O A
BR
ASI
VE
HA
RD
SOFT
IMPREGNATED BITS
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Diamantina Christensen has also impregnated bits with non-standard features upon request. In this section you can order specially designed bits according to your needs:
Picture 5: Available discharges for standard core lifter case
Picture 6: Available discharges for pilot core lifter case
A. REGULAR WATERWAY B. WIDE WATERWAY
C. TURBO WATERWAY D. FACE WATERWAY
Picture 7: Available waterways configuration
Picture 8: Reinforced bit blank upon request
*Other options upon request
STANDARD CORE LIFTER CASE
A. REGULAR DISCHARGE B. FACE DISCHARGE
PILOT CORE LIFTER CASE
D. DEEP WATERWAYC. FACE DISCHARGE
Ordering code:1. Bit size (Chart 1, page A-8)2. Bit series (Picture 4, previous page)3. Discharge configuration (Picture 5 or 6)4. Waterway configuration (Picture 7)5. Bit blank (Picture 8)
Example:
• Impregnated bit size HQ• Series 4A• Deep waterway discharge for pilot core lifter case• Wide waterway• Reinforced blank
HQ- 4A - Deep waterway discharge for pilot core lifter case - Wide waterway - Reinforced bit blank
HOW TO ORDER A NON-STANDARD FEATUREIMPREGNATED BIT?
IMPREGNATED BITS NON-STSTANDARD OPTIONS
A-6
CASING SHOES
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Diamantina Christensen introduces the latest generation of casing shoes used for drilling down or positioning casing tubes in a drilled hole
•
•
•
Impregnated casing shoes are recommended for hard and fractured formations while surface-set diamond casing shoes are recommended for soft to medium hard formations.
The inside diameter is not set with diamonds and fit with the outside diameter of the reaming shell, allowing free passage of rods, core bits, core barrels and reaming shells.
Standard surface-set casing shoes are produced with specially chosen diamonds of 40 spc. Other diamond sizes are availables upon request.
GENERAL DESCRIPTION
Ordering code:1. Impregnated casing shoe size (Chart 2, page A-8)
Example:
• Impregnated casing shoe size HW• Series 2
Options availables upon request:
- Reinforced shoe blank- Series 7 and 9 for impregnated casing shoes- Other diamond sizes for surface-set casing shoes
HW Impregnated casing shoe
Ordering code:1. Surface-set diamond casing shoe size (Chart 2,
page A-8)
Example:
• Surface-set diamond casing shoe size HW• 40 spc diamond size
HW Surface-set diamond casing shoe
HOW TO ORDER A SURFACE-SET DIAMOND CASING SHOE?
HOW TO ORDER A IMPREGNATED CASING SHOE?
All kind of casing shoes are available. In addition, all the orders are warmly accepted according to specific customer's requirements
A-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
REAMING SHELLS
Diamantina Christensen introduces the latest generation of reaming shells utilized to maintain the hole gauge and stabilize the drilling system during the operation
• Reaming shells are produced with high quality diamonds selected to ensure an optimum performance.
• Deep and wide waterways to facilitate effective flushing and contribute to a long life.
• Designed to be placed behind the core bit to ensure the hole diameter and to assist the core barrel's stabilization.
GENERAL DESCRIPTION
How to order a reaming shell?
Ordering code:1. Reaming shell size (Chart 1, page A-8)
Example:
• Reaming shell size HQ
Options:
Reinforced shell blank available upon request
HQ Reaming shell
HOW TO ORDER A REAMING SHELL?
All kind of reaming shells are available. In addition, all the orders are warmly accepted according to specific customers requirements.
A-8
AVAILABLE SIZES
IN MM IN MM IN MM
RW 1,470 37.7 1,000 25.4 1,186 30.0
EW 1,875 47.6 1,405 35.6 1,500 37.9
AW 2,345 59.5 1,780 45.2 1,905 48.2
BW 2,965 75.3 2,215 56.2 2,375 60.1
NW 3,615 91.8 2,840 72.1 3,000 75.9
HW 4,625 117.4 3,778 95.9 3,925 99.6
PW 5,650 143.5 4,632 117.4 4,858 121.3
SW 6,790 172.4 5,632 142.8 5,941 146.7
UW 7,800 196.1 6,755 171.4 6,906 175.3
ZW 8,810 223.7 7,755 196.8 7,977 200.7
CASING SHOE & CASING BIT SIZES
CASING SIZE
INNER DIAMETER CASING BIT
INNER DIAMETER CASING SHOE
OUTER DIAMETER CASING BIT & SHOE
IN MM IN MM IN MM
RWT (XRT) 1.175 29.8 0.735 18.7 1.175 29.8
XRPS 1.295 32.9 0.890 22.6 1.295 32.9
EWG, EWL, EWM 1.470 37.3 0.845 21.5 1.485 37.7
EWT (EXT) 1.470 37.3 0.905 23.0 1.485 37.7
IEW 1.470 37.3 0.995 25.3 1.485 37.7
T2-46 1.811 46.0 1.248 31.7 1.823 46.3
TT46, LTK46 1.811 46.0 1.389 35.3 1.823 46.3
AQ 1.875 47.6 1.062 27.0 1.890 48.0
AWG, AWL, AWM 1.875 47.6 1.185 30.1 1.890 48.0
AQTK 1.875 47.6 1.201 30.5 1.890 48.0
AWT (AXT) 1.875 47.6 1.281 32.5 1.890 48.0
ATK34 (AW34) 1.875 47.6 1.320 33.5 1.890 48.0
JKT48, LTK48 1.875 47.6 1.389 35.3 1.890 48.0
AXC (AWC3) 1.890 48.0 1.062 27.0 1.890 48.0
T2-56 2.205 56.0 1.642 41.7 2.216 56.3
TT56, LTK56 2.205 56.0 1.783 45.3 2.216 56.3
BQ3 2.345 59.6 1.320 33.5 2.360 59.9
BQ 2.345 59.6 1.433 36.4 2.360 59.9
BQTK 2.345 59.6 1.601 40.7 2.360 59.9
BTW 2.345 59.6 1.654 42.0 2.360 59.9
BWG, BWL, BWM 2.345 59.6 1.655 42.0 2.360 59.9
BTK44 (BW44) 2.345 59.6 1.755 44.6 2.360 59.9
BXB (BWC3) 2.360 59.9 1.433 36.4 2.360 59.9
BQ (oversize) 2.440 62.0 1.433 36.4 2,440 62.0
T2-66 2.598 66.0 2.035 51.7 2.609 66.3
NQ3, NQTT 2.965 75.3 1.775 45.1 2.980 75.7
NQ 2.965 75.3 1.875 47.6 2.980 75.7
NQ2 2.965 75.3 1.995 50.7 2.980 75.7
NWG, NWL, NWM 2.965 75.3 2.155 54.7 2.980 75.7
NTW 2.965 75.3 2.209 56.1 2.980 75.7
NXB (NWC3) 2.980 75.7 1.875 47.6 2.980 75.7
NWD4 2.980 75.7 2.060 52.3 2.980 75.7
T2-76 2.992 76.0 2.429 61.7 3.006 76.4
NQ (oversize) 3.032 77.0 1.875 47.6 3,032 77.0
NXB (oversize) 3.032 77.0 1.875 47.6 3.032 77.0
HXB (HWD3) 3.650 92.7 2.400 61.0 3.650 92.7
HXB (oversize) 3.750 95.3 2.400 61.0 3.750 95.3
HQ3, HQTT 3.763 95.6 2.406 61.1 3.783 96.1
HQ 3.763 95.6 2.500 63.5 3.783 96.1
HQ (oversize) 3.830 97.3 2.500 63.5 3.850 97.8
HWG 3.890 98.8 3.000 76.2 3.907 99.2
CHD101 3.968 100.8 2.500 63.5 3.990 101.3
PQ3 4.805 122.0 3.270 83.1 4.828 122.6
PQ 4.805 122.0 3.345 85.0 4.828 122.6
CORE BIT & REAMING SHELL SIZESINNER DIAMETER
CORE BITSOUTER DIAMETER REAMING SHELLSSIZES
OUTER DIAMETERCORE BITS
Chart 1: Available core bit and reaming shell sizes
Chart 2: Available casing shoe sizes
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-9
OPERATIONAL PARAMETERS
The most important parameters to consider for a correct function of the bits are:- Rotational Speed- Bit Weight- Fluid Flow
Rotational Speed
The rotational speed depends on the types of formation that are being perforated and the interrelation among the capacities of the drill and the individual style of drilling.
The most important factor to consider to optimize the bit life is the penetration rate index or RPI. This factor is determined by dividing the rotational speed (rev / min) by the penetration rate (in / min).
Example: 1200 (rev/min) at 6 (in/min) will result in
RPI = 1200 rpm = 200 rev/in 6 in/min
For optimum performance, the operator should maintain a penetration rate index between 200 - 250 revolutions per inch drilled. If RPI rate is too low an excessive wear will occur to your bit, so you should either increase rpm or decrease the penetration rate by reducing bit weight. On the other hand, if the RPI is too high, the bit might polish and the velocity of
penetration will be reduced, so you should decrease rpm or increase the penetration rate by increasing bit weight.
Bit weight
The bit weight should be applied depending on the velocity of rotation to maintain the bit penetrating, just as the RPI factor indicate. Nevertheless, if the load applied is too high can cause a premature wear of the bit or even a mechanical failure. If the load applied is too low, the bit might polish requiring the matrix surface to be removed to expose a new layer of diamonds. Fluid Flow
The fluid flow is another critical variable to optimize the drilling efficiency. The purpose of this fluid is to cold down and to minimize the accumulattion of material at the bit face. Generally, cuttings should always have an upward velocity of 4 inch/sec (10cm/sec). A too high volume of fluid can cause hydraulic lift that seriously affect the bit weight and consequently drilling performance. A low volume of fluid can cause a premature wear of the crown due to the abrasive action of the cuttings.
The following chart ilustrate the minimum and maximum operational parameters to achieve a optimum performance for impregnated bits:
BIT SIZEROTATIONAL
SPEED
Gal/Min Litres/Min Lb Kg RPM 200 RPI 250 RPI 80 RPC 100 RPC
2,300 11.5 9.2 29 23
1,400 7 5.6 18 14
1,000 5 4 13 10
2,000 10 8 25 20
1,200 6 4.8 15 12
850 4.25 3.4 11 9
1,700 8.5 6.8 22 17
1,000 5 4 13 10
700 3.5 2.8 9 7
1,350 6.75 5.4 17 14
800 4 3.2 10 8
550 2.75 2.2 7 6
1,000 5 4 13 10
600 3 2.4 8 6
400 2 1.6 5 4
800 4 3.2 10 8
500 2.5 2 6 5
350 1.75 1.4 4 4
FLUID FLOW BIT WEIGHTPENETRATION RATE
INDEX (In/Min)
9 - 132.5 - 3.5 1,000-3,000 450 - 1,350
BQ
900 - 2,2702,000-5,00015 - 194 - 5
PQ
HQ 10 - 12 38 - 45
2,270 - 4,5405,000-10,00068 - 8718 - 23
1,810 - 3,630
1,360 - 2,7203,000-6,00030 - 38
4,000-8,000
PENETRATION RATE INDEX (Cm/Min)
OPERATIONAL PARAMETERS
8 - 10NQ
AQ
TT-46
900 - 2,2702,000-5,00023 - 306 - 8
Chart 3: Oprerational perameters for impregnated bits
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-10
WEAR PATTERNS
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
When an impregnated bit is removed from the drill hole after use, the resulting wear pattern is an important source of information for the operator. The following illustrations will help identify and remedy many of the common fields problems:
NEW BITA bit face without use
IDEAL WEAR PATTERNThe face wear pattern on a properly used impregnated bit should be relatively flat with slightly chamfered sides
NORMAL RETIREMENTThe bit must be retired when the full depth of impregnation is evenly consumed.The first indicator that a bit is normal retirement is a rise in pump pressure due to the diminishing depth of waterways
CRACKED WATERWAYS
Possible causes:- Excessive bit load- The drill string was
accidentally dropped in the hole
- Free fall of the inner tube through the drill rod string in a dry hole
- Bit crushed by the rod holder or foot clamp
BURNT CROWNLack of fluid circulation throught the bit face
Possible causes:- Internal core barrel fluid
restrictions due to the incorrect adjustment of the inner tube
- Fluid leaks in the drill rod string, water swivel or hoses
- Failure of the fluid circulation pump
- Blocked waterway canals of the bit by pebbles or other debris
OUTER DIAMETER GAUGE LOSS
Possible causes and solutions:- Vibration: Lower the
rotational speed- Lack of fluid circulation:
Check possible leaks or increase the flow rate
- Bit is reaming an undersized hole: Check the reaming shell diameter and replaced if found undersized
A-11
WEAR PATTERNS
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CONVEX FACE WEAR
Possible causes and solutions:- Insufficient fluid circulation
throught the bit face: Check possible leaks in the drill rod string or increase the pump output
- Cutting remains at the outside edge of the hole, wearing the outside rim of the bit: Increase the fluid flow
INNER DIAMETER GAUGE LOSS
Possible causes and solutions:- The bit is overfeeded:
Reduce the penetration rate
- Drilling into a highly broken formation: Change to a lower series bit
- Drilling over lost core: Check the core tube contents
- Lack of fluid circulation: Examinate the inner tube length adjustment to ensure that there are no fluid restrictions within the core barrel assembly. Also check possible leaks in the drill rod string and the pump output
CONCAVE FACE WEAR
Possible causes and solutions:- Excessive penetration rate
for the rotational speed used: Reduce the penetration rate or/and increase the rotational speed
- This wear pattern also can be caused by core grindings or overdrilling
EXCESSIVE DIAMOND EXPOSUREThe matrix abrades away before the diamonds have become worn. Because of the insufficient matrix, the diamonds are released prematurely resulting in low bit life.
Possible causes and solutions:- The penetration rate is too
high for the rotational speed in use: Increase the rotational speed or reduce the penetration rate
- The matrix is too soft for the ground conditions: Change to a lower series bit
GLAZED FACEThe diamonds on the bit face have become completely embedded in the matrix
Solutions:- Drill with a higher
penetration rate, slower rotational speed or lower fluid circulation rate in order to abrade the matrix and re-expose the diamond crystals
- If the bit face glazes repeatedly, change to a higher series number
SHARPENING TECHNIQUES:
Out of-Hole Method: sandblast the face with an abrasive media, or use a tapping action with a flat file to roughen the surface of the bit face.
In-Hole Method: with the bit on the bottom of the drill hole, reduce the rotational speed to about 50% to 70% of the normal rotational speed. Try to maintain a constant penetration rate for a distance of ½ to 1½ inches (1-3cm) while bit pressure gradually increase, then the bit pressure will drop quickly indicating that the bit face has sharpened and will now cut freely.Important: inmediately reduce bit pressure and increase rotational speed to conform to the correct RPI.
TABLE OF CONTENTSWIRELINE CORE BARREL SECTION
B-1
SECTION B
Wireline Core Barrels & Overshot
Wireline Accessories
Wireline Overshots "Roller Type"
Wireline Core Barrel Triple Tube
Wireline Conversion Kits W/L to W/L 3
Wireline Core Lifter Options W/L 3
Fluid Control Kit
B-2
B-12
B-14
B-18
B-26
B-27
B-28
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AB
C
42010016000Landing ring
42010018000Inner tubestabilizer
42010019000Threadprotector
42010014000Adaptorcoupling
42010013000Lockingcouplingstandard
42010020005Outer Tube- 5'
42010020010Outer Tube - 10'
42010011000Stop ring
42010012000Core lifter
42010010000Core liftercase
42010009010Inner Tube - 10'
42010009005Inner Tube - 5'
42010004130Compression
spring
42010004135Self lock nut
42010004145Grease fitting
42010004150Steel ball
42010004155Check valve body
42010004105Shut-off valve
(2)42010004110Valve adjustingwasher (2)
42010004120Spindle bearing
42010004160Hanger bearing
42010004140Inner tubecap assy FF
42010004050Latch spring
42010004055Latch (2)
42010004065Latch support
42010004035Latch retracting
case
42010004005Spearhead point
42010004020Spring pin (5/16" x 3/4")
42010004010Compression spring
42010004015Detent plunger
42010004045Spearhead base
42010004040Spring pin (2)(5/16" x 1 1/8")
42010004020Spring pin (5/16" x 3/4")
42010004070Spring pin (1/4" x 3/4")
42010004080Upper body
42010004085Landingshoulder
42010004090Lower body
42010004075Latch bodyassy
AssembliesWeight
Lbs. Kgs.
35.00
58.00
11.00
16.00
5.70
15.80
26.30
4.90
7.20
2.50
Description
A W/L Core Barrel Assy x 5'
A W/L Core Barrel Assy x 10'
A W/L Inner Tube Assy x 5'
A W/L Inner Tube Assy x 10'
A W/L Head Assy.
Part NumberGroup
A
B
C
42010001005
42010001010
42010002005
42010002010
42010003000
WIRE LINE CORE BARREL "KNUCKLE HEAD"SIZE: A W/L
42010004100Spindle assy
42010004095Lock nut
42010004115Ball thrustbearing
B-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
16.35
0.56
7.40
0.20
Description
A W/L Over Shot Assy
A W/L Cable Swivel Assy
Part Number Group
A
B
42013001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: A W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42013004100Jar tubeweldment
42013003300Selft lock nut
42013003500Jar staff
42013003200Cableswivel body
A
B
42013003900Spiral pin (2)(3/16" x 1")
42013003700Lifting dog
spring
42013004000Lifting dog (2)
42013003400Locking sleeve
42013003600Overshot head
42013003800Lifting dogpivot pin (3/8"x 1 1/8")
42013003900Spring pin (3/16" x 1")
42013004200Jar headbottom
42010004145Grease fitting
B-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42020016000Landing ring
42020018000Inner tubestabilizer
42020019000Threadprotector
42020014000Adaptorcoupling
42020013000Lockingcouplingstandard
42020020005Outer Tube - 5'
42020020010Outer Tube - 10'
42010011000Stop ring
42010012000Core lifter
42010010000Core liftercase
42020009010Inner Tube - 10'
42020009005Inner Tube - 5'
42020004130Compression
spring
42020004135Self lock nut
42010004145Grease fitting
42020004150Steel ball
42020004155Check valve body
42020004105Shut-off valve
(2)
42020004100Spindle assy
42020004110Valve adjustingwasher (2)
42020004115Ball thrustbearing
42020004120Spindle bearing
42020004115Ball thrust bearing
42020004140Inner tubecap assy FF
42020004050Latch spring
42020004055Latch (2)
42020004035Latch retracting
case
42020004005Spearhead point
42020004020Spiral pin (7/16" x 1")
42020004010Compression spring
42020004015Detent plunger
42020004045Spearhead base
42020004040Spring pin (2)(3/8" x 1 5/8")
42020004060Spiral pin (3/8" x 1 1/4")
42020004070Spring pin (1/4" x 1 1/4")
42020004080Upper body
42020004085Landingshoulder
42020004090Lower body
42020004075Latch bodyassy
AssembliesWeight
Lbs. Kgs.
54.00
90.00
21.00
28.00
11.50
24.50
40.80
9.50
12.70
5.20
Description
B W/L Core Barrel Assy x 5'
B W/L Core Barrel Assy x 10'
B W/L Inner Tube Assy x 5'
B W/L Inner Tube Assy x 10'
B W/L Head Assy.
Part Number
42020001005
42020001010
42020002005
42020002010
42020003000
WIRE LINE CORE BARREL "KNUCKLE HEAD"SIZE: B W/L
42020004095Lock nut
42020004065Latch support
Group
A
B
C
AB
C
B-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
23.00
0.56
10.40
0.20
Description
B W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42023001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: B W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42023004200Jar tubeweldment
42023003300Selft lock nut
42023003500Jar staff
42023003200Cableswivel body
B
42023004300Spiral pin (2)
(7/32" x 1 1/4")
42023003800Lifting dog
spring
42023004100Lifting dog (2)
42023003400Locking sleeve
42023003600Machine screw
42023003900Lifting dogpivot pin (1/8"x 1 7/16")
42023004000Spring pin (3/16" x 1 3/8")
42023003700Overshot head
42010004145Grease fitting
A
B-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42030016000Landing ring
42030018000Inner tubestabilizer
42030019000Threadprotector
42030014000Adaptorcoupling
42030013000Lockingcouplingstandard
42030020005Outer Tube - 5'
42030020010Outer Tube - 10'
42030011000Stop ring
42030012000Core lifter
42030010000Core liftercase
42030009010Inner Tube - 10'
42030009005Inner Tube - 5'
42030004130Compression
spring
42030004135Self lock nut
42010004145Grease fitting
42030004150Steel ball
42030004155Check valve body
42030004105Shuft-off valve
(2)
42030004100Spindle assy
42030004110Valve adjustingwasher (2)
42030004115Ball thrustbearing
42030004120Spindle bearing
42030004160Hanger bearing
42030004140Inner tubecap assy FF
42030004050Latch spring
42030004055Latch (2)
42030004065Latch support
42030004035Latch retracting
case
42020004005Spearhead point
42020004020Spiral pin (7/6" x 1")
42020004010Compression spring
42020004015Detent plunger
42030004045Spearhead base
42030004040Spring pin (2)(1/2" x 2)
42030004060Spring pin (1/2" x 1 1/2")
42030004070Spring pin (1/4" x 1 1/2")
42030004080Upper body
42030004085Landingshoulder
42030004090Lower body
42030004075Latch bodyassy
AssembliesWeight
Lbs. Kgs.
89.70
138.00
34.40
47.00
20.13
40.70
62.40
15.60
21.30
9.10
Description
N W/L Core Barrel Assy x 5'
N W/L Core Barrel Assy x 10'
N W/L Inner Tube Assy x 5'
N W/L Inner Tube Assy x 10'
N W/L Head Assy.
Part NumberGroup
A
B
C
42030001005
42030001010
42030002005
42030002010
42030003000
WIRE LINE CORE BARREL "KNUCKLE HEAD"SIZE: N W/L
42030004095Lock nut
AB
C
B-6 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
35.35
0.56
16.00
0.20
Description
N W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42033001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: N W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42033004200Jar tubeweldment
42033003300Selft lock nut
42033003500Jar staff
42033003200Cableswivel body
B
42033004300Spiral pin (2)
(1/4" x 1 1/2")
42023003800Lifting dog
spring
42033004100Lifting dog (2)
42033003400Locking sleeve
42023003600Machine screw
42033003900Lifting dogpivot pin (1/2" x 1 15/16")
42033004000Spring pin (1/4" x 1 3/4")
42033003700Overshot head
42010004145Grease fitting
A
B-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42040016000Landing ring
42040018000Inner tubestabilizer
42040019000Threadprotector
42040014000Adaptorcoupling
42040013000Lockingcouplingstandard
42040020005Outer Tube - 5'
42040020010Outer Tube - 10'
42040011000Stop ring
42040012000Core lifter
42040010000Core liftercase
42040009010Inner Tube - 10'
42040009005Inner Tube - 5'
42040004130Compression
spring
42040004135Self lock nut
42010004145Grease fitting
42030004150Steel ball
42030004155Check valve body
42040004105Shut-off valve
(2)
42040004100Spindle assy
42040004110Valve adjustingwasher (2)
42040004115Ball thrustbearing (2)
42040004120Spindle bearing
42030004115Ball thrust bearing
42040004140Inner tubecap assy FF
42040004050Latch spring
42040004055Latch (2)
42040004065Latch support
42040004035Latch retracting
case
42020004005Spearhead point
42020004020Spiral pin (7/16" x 1")
42020004010Compression spring
42020004015Detent plunger
42040004045Spearhead base
42040004040Spring pin (2)(1/2" x 2 3/4")
42030004040Spring pin (1/2" x 2")
42040004070Spring pin (3/8" x 2")
42040004085Landingshoulder
42040004090Lower body
42040004075Latch bodyassy
AssembliesWeight
Lbs. Kgs.
145.00
214.50
60.50
79.00
41.25
65.90
97.20
27.40
35.80
18.70
Description
H W/L Core Barrel Assy x 5'
H W/L Core Barrel Assy x 10'
H W/L Inner Tube Assy x 5'
H W/L Inner Tube Assy x 10'
H W/L Head Assy.
Part NumberGroup
A
B
C
42040001005
42040001010
42040002005
42040002010
42040003000
WIRE LINE CORE BARREL "KNUCKLE HEAD"SIZE: H W/L
42040004095Lock nut
42040004080Upper body
AB
C
B-8 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
38.60
0.56
17.50
0.20
Description
H W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42043001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: H W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42033004200Jar tubeweldment
42033003300Selft lock nut
42033003500Jar staff
42033003200Cableswivel body
B
42023003800Lifting dog
Spring
42033004300Spiral pin (2)(1/4" x 1 1/2")
42033004100Lifting dog (2)
42033003400Locking sleeve
42023003600Machine screw
42043003900Lifting dogpivot pin (1/2"x 2 9/16")
42043003700Overshot head
42043004300Sleeve adapter
42010004145Grease fitting
A
B-9Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42050016000Landing ring
42050020005Outer Tube - 5'
42050018000Inner tubestabilizer
42050019000Threadprotector
42050014000Adaptorcoupling
42050013000Lockingcouplingstandard
42050020010Outer Tube - 10'
42050009010Inner Tube - 10'
42050011000Stop ring
42050012000Core lifter
42050010000Core liftercase
42050009005Inner Tube - 5'
42050004130Compression
spring
42050004135Self lock nut
42010004145Grease fitting
65100000040Steel ball
42050004155Check valve body
42050004110Valve adjustingwasher (3)
42050004117Thrust bearingspacer (2)
42050004100Spindle assy
42050004115Ball thrust bearing (2)
42050004132Thrust bearing spacer
42050004140Inner tubecap assy FF
42050004035Latch retracting
case
42050004050Latch spring
42010004145Grease fitting
42050004045Spearhead base
42050004040Spiral pin (2)(3/4" x 3 3/4")
WIRE LINE CORE BARREL "KNUCKLE HEAD"SIZE: P W/L
42050004103Shut-offvalve (2)
42050004120Spindle bearingwith cage
42050004117Thrust bearingspacer (2)
42050004131Spring retainingwasher
42050004165O'ring
42050003005Spearhead point 42050003010
Pivot pin (3/4" x 2 1/4")
42050003020Compression spring
42050003025Detent plunger
42050004055Latch (2)
42050004065Latch support
42030004040Spring pin (2)(1/2" x 2")
42040004040Spring pin(1/2" x 2 3/4")
42050004075latch body withlanding shoulder
AssembliesWeight
Lbs. Kgs.
232.00
325.00
116.00
142.00
87.45
Description
P W/L Core Barrel Assy x 5'
P W/L Core Barrel Assy x 10'
P W/L Inner Tube Assy x 5'
P W/L Inner Tube Assy x 10'
P W/L Head Assy.
Part NumberGroup
A
B
C
42050001005
42050001010
42050002005
42050002010
42050003000
104.80
147.20
52.40
64.40
39.70
42050004095lock nut
42050004085landing shoulder
AB
C
B-10 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
93.15
4.40
42.30
2.00
Description
P W/L Over Shot Assy
P W/L Cable Swivel Assy
Part NumberGroup
A
B
42053001005
42053002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: P W/L
42053003010Wire ropethimble (5/16")
42053003015Eye bolt
42053003020Cable swivelcollar
42020004115Ball thrust
bearing42053003030Nut
42053003035Cotter pin (1/8" x 1 3/4")
42033004200Jar tubeweldment
42053003300Self lock nut
42053003500Jar staff
42053003200Cableswivel body
B
42053004300Spiral pin (2)(5/16" x 2")
42053003800Lifting dog
spring
42053004100Lifting dog (2)
42053003400Locking sleeve
42053003900Lifting dogpivot pin(1" x 3 5/16")
42053004400Spring pin (1/4" x 3")
42053003700Overshot head
42010004145Grease fitting
A
B-11Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OPTIONS
B-12
5'
A W/L
B W/L
N W/L
H W/L
P W/L
42010009105
42020009105
42030009105
42040009105
42050009105
10'
A W/L
B W/L
N W/L
H W/L
P W/L
42010009110
42020009110
42030009110
42040009110
42050009110
CHROME PLATED INNER TUBE
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OPTIONS
B-13
A W/L
B W/L
N W/L
NM W/L
H W/L
HM W/L
PQ (HW CASING)
PQ (HWT BOX)
42010013200
42020013200
42030013200
42035013200
42040013200
42045013200
42050013200
42050013201
CARBIDE LOCKING COUPLING
A W/L
B W/L
N W/L
NM W/L
H W/L
HM W/L
PQ (HW CASING)
PQ (HWT BOX)
42010013300
42020013300
42030013300
42035013300
42040013300
42045013300
42050013300
42050013301
LOCKING COUPLING PLAIN
A W/L
B W/L
N W/L
H W/L
P W/L
42010012005
42020012005
42030012005
42040012005
42050012005
BROACHED CORE LIFTER
B W/L
N W/L
H W/L
42020004106
42030004106
42040004106
SHUT OFF VALVE SOFT
N W/L
H W/L
P W/L
42030010005
42040010005
42050010005
FRONTAL DISCHARGECORE LIFTER CASE
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
00.00
0.56
00.00
0.20
Description
A W/L Overshot Road Runner Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42015001005
42013002000
WIRE LINE OVER SHOT "ROAD RUNNER"SIZE: A W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42025002000Road runner assy
42013004100Jar tubeweldment
42013003200Cableswivel body
B
42023003600Overshot head
42013003900Spring pin(3/16" x 1")
A
B-14
34025003004Bolt sockethead (3)
34025003012Road runnerbearing (3)
34025003030Road runnerwheel (3)
42013003300Self lock nut
42013003500Jar staff
42013003700Lifting dog
spring
42013003900Spring pin (2)(3/16" x 1")
42013004000Lifting dog (2)
42013003800Lifting dogpivot pin(3/8" x 1 1/8")
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42013003400Locking sleeve
42013004200Jar headbottom
42013003900Spring pin (2)(3/16" x 1")
AssembliesWeight
Lbs. Kgs.
00.00
0.56
00.00
0.20
Description
B W/L Overshot Road Runner Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42025001005
42013002000
WIRE LINE OVER SHOT "ROAD RUNNER"SIZE: B W/L
B
A
B-15
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
34025002040Road runner assy
42023004200Jar tubeweldment
42023003200Cableswivel body
42023003600Machine screw
42023004000Spring pin(3/16" x 1" 3/8")
34025003006Bolt sockethead (3)
34025003012Road runnerbearing (3)
34025003035Road runnerwheel (3)
42023003300Self lock nut
42023003500Jar staff
42023003800Lifting dog
spring
42023004300Spiral pin (2)
(7/32" x 1 1/4")
42023004100Lifting dog (2)
42023003900Lifting dogpivot pin (1/2" x 1 15/16")
42010004145Grease fitting
42023003700Overshot head
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
00.00
0.56
00.00
0.20
Description
N W/L Overshot Road Runner Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42035001005
42013002000
WIRE LINE OVER SHOT "ROAD RUNNER"SIZE: N W/L
B
A
B-16
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
34025002050Road runner assy
42033004200Jar tubeweldment
42033003200Cableswivel body
42023003600Machine screw
42033004000Spring pin(1/4" x 1 3/4")
34025003005Bolt sockethead (3)
34025003012Road runnerbearing (3)
34025003040Road runnerwheel (3)
42033003300Self lock nut
42033003500Jar staff
42023003800Lifting dog
spring
42033004300Spiral pin (2)
(1/4" x 1 1/2")
42033004100Lifting dog (2)
42033003900Lifting dogpivot pin (1/2" x 1 15/16")
42010004145Grease fitting
42033003700Overshot head
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
00.00
0.56
00.00
0.20
Description
H W/L Overshot Road Runner Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42045001005
42013002000
WIRE LINE OVER SHOT "ROAD RUNNER"SIZE: H W/L
B
A
B-17
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
34025002060Road runner assy
42033004200Jar tubeweldment
42033003200Cableswivel body
42043003700Overshot head
42043004300Sleep adapter
34025003005Bolt sockethead (3)
34025003012Road runnerbearing (3)
34025003045Road runnerwheel (3)
42033003300Self lock nut
42033003500Jar staff
42023003800Lifting dog spring
42033004100Lifting dog (2)
42010004145Grease fitting
42043003900Lifting dog pivot pin(1/2"x 2 9/16")
42023003600Machine screw
42033004300Spiral pin (2)(1/4"x 1 1/2")
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD"SIZE: B W/L-3
B-18
AssembliesWeight
Lbs. Kgs.
60.20
97.00
26.30
36.30
11.50
Description
B W/L-3 Core Barrel Assy x 5'
B W/L-3 Core Barrel Assy x 10'
B W/L-3 Inner Tube Assy x 5'
B W/L-3 Inner Tube Assy x 10'
B W/L KH Head Assy.
Part NumberGroup
A
B
C
42021001005
42021001010
42021002005
42021002010
42020003000
27.3
44.1
11.9
16.5
5.2
42020016000Landing ring
42020020005Outer Tube - 5'
42020018000Inner tubestabilizer
42020019000Threadprotector
42020014000Adaptorcoupling
42020013000Lockingcouplingstandard
42020020010Outer Tube - 10'
42021008010Split Tube - 10'
42021011000Stop ring
42021012000Core lifter
42021010000Core liftercase
42021008005Split Tube - 5'
42020004130Compression spring
42020004135Self lock nut
42010004145Grease fitting
42020004155Check valve body
42020004105Shut-off valve
(2)
42020004110Valve adjustingwasher (2)
42020004115Ball thrustbearing
42020004120Spindle bearing
42020004115Ball thrust bearing
42020004140Inner tubecap assy FF
42020004045Spearhead base
42020004040Spring pin (2)(3/8" x 1 5/8")
42020004100Spindle assy
42020004095Lock nut
42020004020Spiral pin (7/16" x 1")
42020004010Compressionspring
42020004050Latch spring
42020004055Latch (2)
42020004065Latch support
42020004060Spiral pin (3/8" x 1 1/4")
42020004070Spring pin (1/4" x 1 1/4")
42020004090Lower body
42020004150Steel ball
42021017000Adaptor
42021005000Piston plug
42020004005Spearhead
point
42020004015Detent plunger
42020004035Latch retracting
case
42020004085Landing shoulder
42020004080Upper body
42020004075Latch bodyassy
AB
C
42021007000Piston
42021006000"O" ring
42020009010Inner Tube - 10'
42020009005Inner Tube - 5'
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
23.00
0.56
10.40
0.20
Description
B W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42023001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: B W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42023004200Jar tubeweldment
42023003300Selft lock nut
42023003500Jar staff
42023003200Cableswivel body
B
42023004300Spiral pin (2)
(7/32" x 1 1/4")
42023003800Lifting dog
spring
42023004100Lifting dog (2)
42023003400Locking sleeve
42023003600Machine screw
42023003900Lifting dogpivot pin (1/8"x 1 7/16")
42023004000Spring pin (3/16" x 1 3/8")
42023003700Overshot head
42010004145Grease fitting
A
B-19Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD"SIZE: N W/L-3
B-20
AssembliesWeight
Lbs. Kgs.
97.65
150.70
40.60
58.20
20.13
Description
N W/L-3 Core Barrel Assy x 5'
N W/L-3 Core Barrel Assy x 10'
N W/L-3 Inner Tube Assy x 5'
N W/L-3 Inner Tube Assy x 10'
N W/L KH Head Assy.
Part NumberGroup
A
B
C
42031001005
42031001010
42031002005
42031002010
42030003000
44.3
68.2
18.5
26.5
9.1
42030016000Landing ring
42030020005Outer Tube - 5'
42030018000Inner tubestabilizer
42030019000Threadprotector
42030014000Adaptorcoupling
42030013000Lockingcouplingstandard
42030020010Outer Tube - 10'
42031008010Split Tube - 10'
42031011000Stop ring
42031012000Core lifter
42031010000Core liftercase
42031008005Split Tube - 5'
42030004130Compression spring
42030004135Self lock nut
42010004145Grease fitting
42030004155Check valve body
42030004105Shut-off valve
(2)
42030004110Valve adjustingwasher (2)
42030004115Ball thrustbearing
42030004120Spindle bearing
42030004160Hanger bearing
42030004140Inner tubecap assy
42030004045Spearhead base
42030004040Spring pin (2)(1/2" x 2")
42030004100Spindle assy
42030004095Lock nut
42020004020Spiral pin (7/16" x 1")
42020004010Compressionspring
42030004050Latch spring
42030004055Latch (2)
42030004065Latch support
42030004090Lower body
42030004150Steel ball
42031017000Adaptor
42021005000Piston plug
42020004005Spearhead
point
42020004015Detent plunger
42030004035Latch retracting
case
42030004085Landing shoulder
42030004080Upper body
42030004075Latch bodyassy
AB
C
42031007000Piston
42031006000"O" ring
42030009010Inner Tube - 10'
42030009005Inner Tube - 5'
42030004060Spiral pin (1/2" x 1 1/2")
42030004070Spring pin (1/4" x 1 1/2")
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
35.35
0.56
16.00
0.20
Description
N W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42033001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: N W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42033004200Jar tubeweldment
42033003300Selft lock nut
42033003500Jar staff
42033003200Cableswivel body
B
42033004300Spiral pin (2)
(1/4" x 1 1/2")
42023003800Lifting dog
spring
42033004100Lifting dog (2)
42033003400Locking sleeve
42023003600Machine screw
42033003900Lifting dogpivot pin (1/2" x 1 15/16")
42033004000Spring pin (1/4" x 1 3/4")
42033003700Overshot head
42010004145Grease fitting
A
B-21Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD"SIZE: H W/L-3
B-22
AssembliesWeight
Lbs. Kgs.
156.70
232.35
72.36
96.11
41.25
Description
H W/L-3 Core Barrel Assy x 5'
H W/L-3 Core Barrel Assy x 10'
H W/L-3 Inner Tube Assy x 5'
H W/L-3 Inner Tube Assy x 10'
H W/L KH Head Assy.
Part NumberGroup
A
B
C
42041001005
42041001010
42041002005
42041002010
42040003000
71.2
105.3
32.9
43.7
18.7
42040016000Landing ring
42040020005Outer Tube - 5'
42040018000Inner tubestabilizer
42040019000Threadprotector
42040014000Adaptorcoupling
42040013000Lockingcouplingstandard
42040020010Outer Tube - 10'
42041008010Split Tube - 10'
42041011000Stop ring
42041012000Core lifter
42041010000Core liftercase
42041008005Split Tube - 5'
42040004130Compression spring
42040004135Self lock nut
42010004145Grease fitting
42030004155Check valve body
42040004105Shut-off valve
(2)
42040004110Valve adjustingwasher (2)
42040004115Ball thrustbearing (2)
42040004120Spindle bearing
42030004115Ball Thrust bearing
42040004140Inner tubecap assy
42040004045Spearhead base
42040004040Spring pin (2)(1/2" x 2 3/4")
42040004100Spindle assy
42040004095Lock nut
42020004020Spiral pin (7/16" x 1")
42020004010Compressionspring
42040004050Latch spring
42040004055Latch (2)
42040004065Latch support
42030004040Spring pin (1/2" x 2")
42040004070Spring pin (3/8" x 2")
42040004090Lower body
42030004150Steel ball
42041017000Adaptor
42021005000Piston plug
42020004005Spearhead
point
42020004015Detent plunger
42040004035Latch retracting
case
42040004085Landing shoulder
42040004080Upper body
42040004075Latch bodyassy
AB
C
42041007000Piston
42041006000"O" ring
42040009010Inner Tube - 10'
42040009005Inner Tube - 5'
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
38.60
0.56
17.50
0.20
Description
H W/L Over Shot Assy
A W/L Cable Swivel Assy
Part NumberGroup
A
B
42043001005
42013002000
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: H W/L
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42013003020Cable swivelcollar
42013003025Needle thrust
bearing
42013003030Nut
42013003035Cotter pin (3/32" x 1")
42033004200Jar tubeweldment
42033003300Selft lock nut
42033003500Jar staff
42033003200Cableswivel body
B
42023003800Lifting dog
Spring
42033004300Spiral pin (2)(1/4" x 1 1/2")
42033004100Lifting dog (2)
42033003400Locking sleeve
42023003600Machine screw
42043003900Lifting dogpivot pin (1/2"x 2 9/16")
42043003700Overshot head
42043004300Sleeve adapter
42010004145Grease fitting
A
B-23Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-24
AssembliesWeight
Lbs. Kgs.
249.45
351.25
132.96
167.46
87.45
Description
P W/L-3 Core Barrel Assy x 5'
P W/L-3 Core Barrel Assy x 10'
P W/L-3 Inner Tube Assy x 5'
P W/L-3 Inner Tube Assy x 10'
P W/L Head Assy.
Part NumberGroup
A
B
C
42051001005
42051001010
42051002005
42051002010
42050003000
112.70
159.10
60.40
76.10
39.70
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD"SIZE: P W/L-3
42050016000Landing ring
42050020005Outer Tube - 5'
42050018000Inner tubestabilizer
42050019000Threadprotector
42050014000Adaptorcoupling
42050013000Lockingcouplingstandard
42050020010Outer Tube - 10'
42051008010Split Tube - 10'
42051011000Stop ring
42051012000Core lifter
42051010000Core liftercase
42041008005Split Tube - 5'
42050004130Compression
spring
42050004135Self lock nut
42010004145Grease fitting
42050004155Check valve body
42050004103Shut-offvalve (2)
42050004110Valve adjustingwasher (3)
42050004117Thrustbearing spacer (2)
42050004120Spindle bearingwith cage
42040004140Inner tubecap assy
42050004045Spearhead base
42030004040Spiral pin(1/2" x 2")
42050004100Spindle assy
42050004095Lock nut
42050003010Pivot pin (3/4" x 2 1/4")
42050003020Compression spring
42050004050Latch spring
42050004055Latch (2)
42050004065Latch support
42030004040Spring pin (2)(1/2" x 2")
42040004040Spring pin(1/2" x 2 3/4")
42050004150Steel ball
42051017000Adaptor
42021005000Piston plug
42050003005Spearhead point
42050003025Detent plunger
42050004035Latch
retractingcase
AB
C
42051007000Piston
42051006000"O" ring
42050009010Inner Tube - 10'
42050009005Inner Tube - 5'
42050004165"O" ring
42050004115Ball thrust
bearing (2)
42050004117Thrustbearing spacer (2)
42050004132Thrust bearing spacer
42050004131Spring retainingwasher
42050004085Landing shoulder
42050004075Latch body withlanding shoulder
42010004145Grease fitting
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
93.15
4.40
42.30
2.00
Description
P W/L Over Shot Assy
P W/L Cable Swivel Assy
Part NumberGroup
A
B
42053001005
WIRE LINE OVER SHOT "KNUCKLE HEAD"SIZE: P W/L
42053003010Wire ropethimble (5/16")
42053003015Eye bolt
42053003020Cable swivelcollar
42053003030Nut
42053003035Cotter pin (1/8" x 1 3/4")
42033004200Jar tubeweldment
42053003300Self lock nut
42053003500Jar staff
42053003200Cableswivel body
B
42053004300Spiral pin (2)(5/16" x 2")
42053003800Lifting dog
spring
42053004100Lifting dog (2)
42053003400Locking sleeve
42053003900Lifting dogpivot pin(1" x 3 5/16")
42053004400Spring pin (1/4" x 3")
42053003700Overshot head
42010004145Grease fitting
A
B-25Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42053002000
42020004115Ball thrust
bearing
CONVERSION KITS W/L TO W/L 3
B-26
AssembliesWeight
Lbs. Kgs.Description
B W/L 3 Conversion Kit Assy 5'
B W/L 3 Conversion Kit Assy 10'
N W/L 3 Conversion Kit Assy 5'
N W/L 3 Conversion Kit Assy 10'
H W/L 3 Conversion Kit Assy 5'
H W/L 3 Conversion Kit Assy 10'
P W/L 3 Conversion Kit Assy 5'
P W/L 3 Conversion Kit Assy 10'
Part Number
42021003005
42021003010
42031003005
42031003010
42041003005
42041003010
42051003005
42051003010
5.74
9.74
9.07
14.07
13.11
18.11
15.01
20.01
2.60
4.40
4.10
6.40
5.90
8.20
6.80
9.10
Piston plug B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021005000
42021005000
42021005000
42021005000
Adapter B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021017000
42031017000
42041017000
42051017000
"O" ring B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021006000
42031006000
42041006000
42051006000
Piston B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021007000
42031007000
42041007000
42051007000
Split tube 5' B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021008005
42031008005
42041008005
42051008005
B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021008010
42031008010
42041008010
42051008010
Stop ring B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021011000
42031011000
42041011000
42051011000
10'
Core lifter B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021012000
42031012000
42041012000
42051012000
Core lifter case B W/L 3
N W/L 3
H W/L 3
P W/L 3
42021010000
42031010000
42041010000
42051010000
Adaptor
Piston plug
"O" ring
Piston
Split tube
Stop ring
Core lifter
Core lifter case
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CORE LIFTER W/L 3 OPTIONS
B-27
B W/L
N W/L
H W/L
P W/L
42021013000
42031013000
42041013000
42051013000
BROACHED CORE LIFTER W/L 3
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
FLUID CONTROL KIT
B-28
FLUID CONTROL KIT ASSY
BALL
FLUID CONTROL SPRING
FLUID CONTROL KIT BOLT
JAM NUT
N W/L
42030020500
42042004190
42040020500
65100000040
H W/L
42040020501
42040020506
42040020505
BALL
FLUID CONTROL
SPRING
FLUID CONTROL KIT
BOLT
JAM NUT
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-1
SECTION C
Wireline "Under Ground"
Core Barrel & Overshot
Wireline "Under Ground"
Accessories
C-2
C-10
TABLE OF CONTENTSUNDERGROUND CORE BARREL SECTION
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42010016000Landing ring
42010020005Outer Tube - 5'
42010018000Inner tubestabilizer
42010019000Threadprotector
42012015000Drivecoupling
42012013200Lockingcouplingstandard
42010020010Outer Tube - 10'
42010009010Inner Tube - 10'
42010011000Stop ring
42010012000Core lifter
42010010000Core liftercase
42010009005Inner Tube - 5'
42010004130Compression
spring
42010004135Self lock nut
42010004145Grease fitting
42010004150Steel ball
42010004155Check valve body
42010004105Shut-off valve
(2)42010004110Valve adjustingwasher (2)
42010004115Ball thrust bearing
42010004120Spindle bearing
42010004160Hanger bearing
42010004140Inner tubecap assy
42012004145Compression
spring
42012004045Spearhead body
42012004075Bolt hexagon head
42012004155Spring pin(5/16" x 1 1/4")
AssembliesWeight
Lbs. Kgs.
36.35
58.00
12.09
17.09
6.90
16.50
26.30
5.50
7.70
3.10
Description
A W/L-U Core Barrel Assy x 5'
A W/L-U Core Barrel Assy x 10'
A W/L-U Inner Tube Assy x 5'
A W/L-U Inner Tube Assy x 10'
A W/L-U Head Assy
Part NumberGroup
A
B
C
42012001005
42012001010
42012002005
42012002010
42012003000
WIRE LINE CORE BARREL "UNDER GROUND"SIZE: A W/L-U
42010004100Spindle assy
42010004095Lock nut
42012004195Ball check spring
42020004150Ball
42012004025Spearhead
42012004030Lock nut
42012004036Pump-in lip seal
42012004055"O" ring (2)
42012004135Washer
42012004165Square pin
42012004150Latch retracting
case
42010004050Latch spring
42012004175Latch (2)
42010004065Latch support
42010004020Spring pin (5/16" x 3/4")
42010004070Spring pin (1/4" x 3/4")
42012004160Latch body
42012004185"O" ring
42012004140Guide spring
AB
C
C-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
4.30
1.00
2.00
0.50
Description
A W/L-U Over Shot Assy
A W/L-U Cable Swivel Assy
Part NumberGroup
A
B
42014001005
42014002000
WIRE LINE OVER SHOT "UNDER GROUND"SIZE: A W/L-U
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42010004145Grease fitting
42013003030Nut
42013003020Cable swivelcollar
42012004030Lock nut
42012004036Pump-inlip seal
42014003400Piston valve(stem)
42014003005Cable swivelbody
42013003700Lifting dog
spring42014003800Spring pin(3/16" x 3/4")
42014004000Valve body(sleeve)
42014004150Lifting dogpivot pin (3/8"x 1 1/4")
42014004100Shear pin (5/32" x 1 1/4")
42014004300Overshot head
42013003035Cotter pin (3/32" x 1")
42014003100Valve cap
42013003025Needle thrust bearing
42014003600"O" ring
42020004070Spring pin(1/4" x 1 1/4")
42014003500"O" ring
42014003900Valve spring
42014004100Shear pin
(5/32" x 1 1/4")
42014004200Lifting dog (2)
A
B
C-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42020016000Landing ring
42020020005Outer Tube - 5'
42020018000Inner tubestabilizer
42020019000Threadprotector
42022015000Drivecoupling
42022013200Lockingcouplingstandard
42020020010Outer Tube - 10'
42020009010Inner Tube - 10'
42020011000Stop ring
42020012000Core lifter
42020010000Core liftercase
42020009005Inner Tube - 5'
42020004130Compression spring
42020004135Self lock nut
42010004145Grease fitting
42020004155Check valve body
42020004105Shut-off valve
(2)42020004110Valve adjustingwasher (2)
42020004115Ball thrust bearing
42020004120Spindle bearing
42020004115Ball thrust bearing
42020004140Inner tubecap assy
42022004150Latch retracting
case
42022004075Bolt hexagon head
42022004140Guide spring
42020004040Spring pin (3/8" x 1 5/8")
AssembliesWeight
Lbs. Kgs.
62.70
97.20
26.33
34.83
18.00
28.50
43.20
11.90
15.80
8.20
Description
B W/L-U Core Barrel Assy x 5'
B W/L-U Core Barrel Assy x 10'
B W/L-U Inner Tube Assy x 5'
B W/L-U Inner Tube Assy x 10'
B W/L-U Head Assy
Part NumberGroup
A
B
C
42022001005
42022001010
42022002005
42022002010
42022003000
WIRE LINE CORE BARREL "UNDER GROUND"SIZE: B W/L-U
42020004100Spindle assy
42020004095Lock nut
42012004195Ball check spring
42020004150Ball
42022004036Pump-in lip seal
42022004045Spearhead body
42022004135Washer
42022004165Square pin
42020004050Latch spring
42022004175Latch (2)
42020004065Latch support
42020004060Spiral pin (3/8" x 1 1/4")
42020004070Spring pin (1/4" x 1 1/4")
42022004163Lower body
42022004185"O" ring
42020004150Steel ball
42022004030Lock nut
42022004025Spearhead
42022004040Backup washer (2)
42022004055"O" ring (2)
42022004145Compression
spring
42020004085Landing shoulder
42022004161Upper body
42022004160Latch body
AB
C
C-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
8.00
1.14
3.60
0.50
Description
B W/L-U Over Shot Assy
B W/L-U Cable Swivel Assy
Part NumberGroup
A
B
42024001005
42024002000
WIRE LINE OVER SHOT "UNDER GROUND"SIZE: B W/L-U
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42010004145Grease fitting
42013003030Nut
42013003020Cable swivelcollar
42024003200Lock nut
42022004040Backup washer (2)
42024003400Piston valve(stem)
42024003005Cable swivelbody
42024004125Lifting dog
spring
42024004000Valve body(sleeve)
42024004150Lifting dogpivot pin (1/2"x 1 5/8")
42024004300Overshot head
42013003035Cotter pin (3/32" x 1")
42024003100Valve cap
42013003025Needle thrust bearing
42022004055"O" ring (2)
42020004060Spring pin(3/8" x 1 1/4")
42024003900Valve spring
42024004100Shear pin(3/16" x 1 11/16")
42024004200Lifting dog (2)
42022004036Pump-in
lip seal
B
A
C-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42030016000Landing ring
42030020005Outer Tube - 5'
42030018000Inner tubestabilizer
42030019000Threadprotector
42032015000Drivecoupling
42032013200Lockingcouplingstandard
42030020010Outer Tube - 10'
42030009010Inner Tube - 10'
42030011000Stop ring
42030012000Core lifter
42030010000Core liftercase
42030009005Inner Tube - 5'
42030004130Compression spring
42030004135Self lock nut
42010004145Grease fitting
42030004155Check valve body
42030004105Shut-off valve
(2)42030004110Valve adjustingwasher (2)
42030004115Ball thrust bearing
42040004120Spindle bearing
42030004160Hanger bearing
42030004140Inner tubecap assy
42032004150Latch retracting
case
42032004075Bolt hexagon head
42032004140Guide spring
42030004040Spring pin (1/2" x 2")
AssembliesWeight
Lbs. Kgs.
95.85
143.85
40.83
53.83
28.25
43.50
65.30
18.60
24.40
12.80
Description
N W/L-U Core Barrel Assy x 5'
N W/L-U Core Barrel Assy x 10'
N W/L-U Inner Tube Assy x 5'
N W/L-U Inner Tube Assy x 10'
N W/L-U Head Assy
Part NumberGroup
A
B
C
42032001005
42032001010
42032002005
42032002010
42032003000
WIRE LINE CORE BARREL "UNDER GROUND"SIZE: N W/L-U
42030004100Spindle assy
42030004095Lock nut
42032004195Ball check spring
42032004190Ball
42032004036Pump-in lip seal
42032004045Spearhead body
42032004135Washer
42032004165Square pin
42030004050Latch spring
42032004175Latch (2)
42030004065Latch support
42030004060Spring pin (1/2" x 1 1/2")
42030004070Spring pin (1/4" x 1 1/2")
42032004163Lower body
42032004185"O" ring
42030004150Steel ball
42032004030Lock nut
42032004025Spearhead
42032004040Backup washer (2)
42032004055"O" ring (2)
42032004145Compression
spring
42030004085Landing shoulder
42032004161Upper body
42032004160Latch body
AB
C
C-6 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A
AssembliesWeight
Lbs. Kgs.
9.60
1.14
4.40
0.50
Description
N W/L-U Over Shot Assy
B W/L-U Cable Swivel Assy
Part NumberGroup
A
B
42034001005
42024002000
WIRE LINE OVER SHOT "UNDER GROUND"SIZE: N W/L-U
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42010004145Grease fitting
42013003030Nut
42013003020Cable swivelcollar
42024003200Lock nut
42032004040Backup washer (2)
42034003400Piston valve(stem)
42024003005Cable swivelbody
42024004000Valve body(sleeve)
42013003035Cotter pin (3/32" x 1")
42024003100Valve cap
42013003025Needle thrust bearing
42022004055"O" ring (2)
42020004060Spring pin(3/8" x 1 1/4")
42024003900Valve spring
42024004100Shear pin(3/16" x 1 11/16")
42032004036Pump-in
lip seal
42024004125Lifting dog
spring
42034004150Lifting dogpivot pin (1/2"x 2 1/4")
42034004300Overshot head
42024004200Lifting dog (2)
B
C-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
42040016000Landing ring
42040020005Outer Tube - 5'
42040018000Inner tubestabilizer
42040019000Threadprotector
42042015000Drivecoupling
42042013200Lockingcouplingstandard
42040020010Outer Tube - 10'
42040009010Inner Tube - 10'
42040011000Stop ring
42040012000Core lifter
42040010000Core liftercase
42040009005Inner Tube - 5'
42040004130Compression spring
42040004135Self lock nut
42010004145Grease fitting
42030004155Check valve body
42040004105Shut-off valve
(2) 42040004110Valve adjustingwasher (2)
42040004115Ball thrustbearing (2)
42040004120Spindle bearing
42030004160Ball thrust bearing
42040004140Inner tubecap assy
42042004150Latch retracting
case
42032004075Bolt hexagon head
42032004140Guide spring
42040004040Spring pin (1/2" x 2 3/4")
Assemblies
Lbs. Kgs.
157.85
227.85
77.30
95.30
58.20
71.70
103.50
35.10
43.30
26.40
Description
H W/L-U Core Barrel Assy x 5'
H W/L-U Core Barrel Assy x 10'
H W/L-U Inner Tube Assy x 5'
H W/L-U Inner Tube Assy x 10'
H W/L-U Head Assy
Part NumberGroup
A
B
C
42042001005
42042001010
42042002005
42042002010
42042003000
WIRE LINE CORE BARREL "UNDER GROUND"SIZE: H W/L-U
42040004100Spindle assy
42040004095Lock nut
42042004195Ball check spring
4204200419 0Ball
42042004036Pump-in lip seal
42042004045Spearhead body
42032004135Washer
42042004165Square pin
42042004170Latch spring
42042004175Latch (2)
42042004180Latch support
42030004040Spring pin (1/2" x 2")
42040004070Spring pin (3/8" x 2")
42042004163Lower body
42042004185"O" ring
42030004150Steel ball
42042004030Lock nut
42042004025Spearhead
42042004040Backup washer (2)
42042004055"O" ring (2)
42032004145Compression
spring
42040004085Landing shoulder
42042004161Upper body
42042004160Latch body
AB
C
Weight
C-8 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AssembliesWeight
Lbs. Kgs.
13.50
1.14
6.10
0.50
Description
H W/L-U Over Shot Assy
B W/L-U Cable Swivel Assy
Part NumberGroup
A
B
42044001005
42024002000
WIRE LINE OVER SHOT "UNDER GROUND"SIZE: H W/L-U
42013003010Wire ropethimble (3/16")
42013003015Eye bolt
42010004145Grease fitting
42013003030Nut
42013003020Cable swivelcollar
42044003200Lock nut
42042004040Backup washer (2)
42044003400Piston valve(stem)
42024003005Cable swivelbody
42023003800Lifting dog
spring
42044004000Valve body(sleeve)
42044004150Lifting dogpivot pin (1/2"x 2 21/64")
42044004300Overshot head
42013003035Cotter pin (3/32" x 1")
42024003100Valve cap
42013003025Needle thrust bearing
42032004185"O" ring (2)
42044004500Spring pin(3/8" x 2")
42044003900Valve spring
42044004100Shear pin(3/16" x 1 15/16")
42044004200Lifting dog (2)
42042004036Pump-in
lip seal
42044004400Overshot guide
B
A
C-9
Group
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OPTIONS
C-10
5'
A W/L
B W/L
N W/L
H W/L
P W/L
42010009105
42020009105
42030009105
42040009105
42050009105
10'
A W/L
B W/L
N W/L
H W/L
P W/L
42010009110
42020009110
42030009110
42040009110
42050009110
CHROME PLATED INNER TUBE
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
UNDERGROUND WIRELINE OPTIONS
C-11
A W/L
B W/L
N W/L
NM W/L
H W/L
HM W/L
PQ (HW CASING)
PQ (HWT BOX)
42012013210
42022013210
42032013210
42035013210
42042013210
42045013210
42052013210
42052013211
CARBIDE LOCKING COUPLING
A W/L
B W/L
N W/L
NM W/L
H W/L
HM W/L
PQ (HW CASING)
PQ (HWT BOX)
42012013300
42022013300
42032013300
42032013310
42042013300
42042013310
42052013300
42052013310
LOCKING COUPLING PLAIN
A W/L
B W/L
N W/L
H W/L
P W/L
42010012005
42020012005
42030012005
42040012005
42050012005
BROACHED CORE LIFTER
B W/L
N W/L
H W/L
42020004106
42030004106
42040004106
SHUT OFF VALVE SOFT
N W/L
H W/L
P W/L
42030010005
42040010005
42050010005
FRONTAL DISCHARGECORE LIFTER CASE
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
D-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSDRILL ROD AND CASING SECTION
SECTION D
Standard Drill Rods
Wireline Drill Rods
Casing
HW Casing Advancer
D-2
D-3
D-4
D-5
D-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
STANDARD DRILL RODS AND COUPLINGS
33010100102 RW 2' 3.90 1.7433010100105 RW 5' 9.75 4.3533010100110 RW 10' 19.50 8.70
33010300102 EW 2' 6.10 2.7033010300105 EW 5' 15.25 6.7533010300110 EW 10' 30.50 13.50
33010400102 AW 2' 7.78 3.5433010400105 AW 5' 19.46 8.8533010400110 AW 10' 38.92 17.70
33010500102 BW 2' 12.63 5.7433010500105 BW 5' 31.58 14.3533010500110 BW 10' 63.15 28.70
33010600102 NW 2' 11.30 5.1433010600105 NW 5' 28.25 12.8533010600110 NW 10' 56.50 25.70
33010700102 HW 2' 24.56 11.1633010700105 HW 5' 61.40 27.9033010700110 HW 10' 122.80 55.80
Metric
33010100075 RW 0.75m 4.88 2.1833010100150 RW 1.50m 9.75 4.3533010100300 RW 3.00m 19.50 8.70
33010300075 EW 0.75m 7.63 3.3833010300150 EW 1.50m 15.25 6.7533010300300 EW 3.00m 30.50 13.50
33010400075 AW 0.75m 9.73 4.4333010400150 AW 1.50m 19.46 8.8533010400300 AW 3.00m 38.92 17.70
33010500075 BW 0.75m 15.79 7.1833010500150 BW 1.50m 31.58 14.3533010500300 BW 3.00m 63.15 28.70
33010600075 NW 0.75m 14.13 6.4333010600150 NW 1.50m 28.25 12.8533010600300 NW 3.00m 56.50 25.70
33010700075 HW 0.75m 30.70 13.9533010700150 HW 1.50m 61.40 27.9033010700300 HW 3.00m 122.80 55.80
Lbs. Kg.Part Number Description Length
Weight
Part Number Description
330101001003301030010033010400100330105001003301060010033010700100
RWEWAWBWNWHW
D-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
HEAT TREATED WIRELINE DRILL RODS
Lbs. Kg.Part Number Description Length
Weight
43030400102 A W/L 2' 6.00 2.7043030400105 A W/L 5' 15.50 20.7043030400110 A W/L 10' 31.30 14.20
43030500102 B W/L 2' 8.00 3.6043030500105 B W/L 5' 20.00 9.1043030500110 B W/L 10' 40.00 18.20
43030600102 N W/L 2' 10.50 4.8043030600105 N W/L 5' 25.00 11.4043030600110 N W/L 10' 51.00 23.20
43030606102 NM W/L 2' 10.50 4.8043030606105 NM W/L 5' 25.00 11.4043030606110 NM W/L 10' 51.00 23.20
43030700102 H W/L 2' 15.00 6.8043030700105 H W/L 5' 38.00 17.3043030700110 H W/L 10' 76.50 34.80
43030706102 HM W/L 2' 15.00 6.8043030706105 HM W/L 5' 38.00 17.3043030706110 HM W/L 10' 77.00 35.00
43030804102 P W/L 2' 21.10 9.6043030804105 P W/L 5' 54.10 24.6043030804110 P W/L 10' 104.60 48.00
33010720102 HWT 2' 23.40 10.6233010720105 HWT 5' 58.50 26.5533010720110 HWT 10' 117.00 53.10
Metric
43030400075 A W/L 0.75m 6.00 2.7043030400150 A W/L 1.50m 15.00 6.8243030400300 A W/L 3.00m 30.00 13.64
43030500075 B W/L 0.75m 7.80 3.6043030500150 B W/L 1.50m 19.50 8.7043030500300 B W/L 3.00m 39.00 17.70
43030600075 N W/L 0.75m 10.20 4.6043030600150 N W/L 1.50m 25.50 10.9043030600300 N W/L 3.00m 51.00 23.20
43030606075 NM W/L 0.75m 10.20 4.6043030606150 NM W/L 1.50m 25.50 10.9043030606300 NM W/L 3.00m 51.00 23.20
43030700075 H W/L 0.75m 15.20 6.9043030700150 H W/L 1.50m 38.00 17.2543030700300 H W/L 3.00m 76.00 34.50
43030706075 HM W/L 0.75m 15.20 6.9043030706150 HM W/L 1.50m 38.00 17.2543030706300 HM W/L 3.00m 76.00 34.50
43030804075 P W/L 0.75m 20.92 9.6043030804150 P W/L 1.50m 52.30 24.0043030804300 P W/L 3.00m 104.60 48.00
33010720075 HWT 0.75m 23.50 10.6033010720150 HWT 1.50m 58.00 26.3033010720300 HWT 3.00m 116.00 52.60
D-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
FLUSH JOINT CASING
Lbs. Kg.
33040200102 RW 2' 3.60 1.6033040200105 RW 5' 9.00 4.0033040200110 RW 10' 18.00 8.00
33040300102 EW 2' 5.60 2.6033040300105 EW 5' 14.00 6.5033040300110 EW 10' 28.00 13.00
33040400102 AW 2' 7.40 3.3633040400105 AW 5' 18.50 8.4033040400110 AW 10' 37.00 16.80
33040500102 BW 2' 14.00 6.3633040500105 BW 5' 35.00 15.9033040500110 BW 10' 70.00 31.80
33040600102 NW 2' 17.20 7.8233040600105 NW 5' 43.00 19.5533040600110 NW 10' 86.00 39.10
33040700102 HW 2' 23.30 10.6033040700105 HW 5' 58.25 26.5033040700110 HW 10' 116.50 53.00
33040720102 HWT 2' 23.40 10.6233040720105 HWT 5' 58.50 26.5533040720110 HWT 10' 117.00 53.10
33040800102 PW 2' 28.80 13.1033040800105 PW 5' 72.00 32.7533040800110 PW 10' 144.00 65.50
33040805102 PWT 2' 28.80 13.1033040805105 PWT 5' 72.00 32.7533040805110 PWT 10' 144.00 65.50
Part Number Description LengthWeight
Metric
33040200075 RW 0.75m 4.50 2.0033040200150 RW 1.50m 9.00 4.0033040200300 RW 3.00m 18.00 8.00
33040300075 EW 0.75m 7.00 3.2533040300150 EW 1.50m 14.00 6.5033040300300 EW 3.00m 28.00 13.00
33040400075 AW 0.75m 9.00 4.1033040400150 AW 1.50m 18.00 8.2033040400300 AW 3.00m 36.00 16.40
33040500075 BW 0.75m 17.25 7.8533040500150 BW 1.50m 34.50 15.7033040500300 BW 3.00m 69.00 31.40
33040600075 NW 0.75m 21.25 9.6533040600150 NW 1.50m 42.50 19.3033040600300 NW 3.00m 85.00 38.60
33040700075 HW 0.75m 28.88 13.1333040700150 HW 1.50m 57.75 26.2533040700300 HW 3.00m 115.50 52.50
33040720075 HWT 0.75m 29.00 13.1533040720150 HWT 1.50m 58.00 26.3033040720300 HWT 3.00m 116.00 52.60
33040800075 PW 0.75m 35.75 16.2533040800150 PW 1.50m 71.50 32.5033040800300 PW 3.00m 143.00 65.00
33040805075 PWT 0.75m 35.75 16.2533040805150 PWT 1.50m 71.50 32.5033040805300 PWT 3.00m 143.00 65.00
D-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
HW / HWT CASING ADVANCER
AssemblyWeight
Lbs. Kgs.
79.10 35.90
Description
HW Casing Advancer Assy
Part Number
34020004500
HWT Cansing Advancer Assy34020004600 79.10 35.90
34020004505Drive-latchcoupling HW
Group
A
Spearhead34020003515
34020003535Roller pin
34020003520Latch clevis
34020004511Spring (2)
34020004512Latch body34020004513
Latch shoe (2)
34020004170Shim set (5)
34020004520Rock BitAdaptor
A
Diamond CasingShoe(See page A6)
Rock Bit3 7/8with 2 3/8 Reg.Pin
ASSEMBLY
34020005005Drive-latchcoupling HWT
E-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSSTANDARD CORE BARRELS SECTION
SECTION E
XRPS Standard Core Barrel
TT- 46 Core Barrel
E-2
E-3
AssembliesWeight
Lbs. Kgs.
2.38 1.08
Description
XRPS Core Barrel Assy x 1’
XRPS Core Barrel Assy x 2’
Part Number Group
30000050101
30000050102
30000050200Head
A
AXRPS Core Barrel Assy x 3’
XRPS Core Barrel Assy x 5’
30000050103
30000050105
4.20 1.91
6.04 2.74
9.69 4.40
30000050301Outer Tube - 1’
30000050302Outer Tube - 2’
30000050303Outer Tube - 3’
30000050305Outer Tube - 5’
E-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
STANDARD CORE BARREL "XRPS"
AssembliesWeight
Lbs. Kgs.Description
TT-46 Core Barrel Assy x 5’ with 43 mm. D.R. Box
Part Number Group
31000370115
CORE BARREL "TT-46”
A
31000370120
31000370135
31000370140
31000370145
31000370150
3100037020031000370201
31000370203
TT-46 Core Barrel Assy x 10’ with 43 mm. D.R. Box
TT-46 Core Barrel Assy x 5’ with AWJ D.R. Box
TT-46 Core Barrel Assy x 10’ with AWJ D.R. Box
TT-46 Core Barrel Assy x 5’ with AW D.R. Box
TT-46 Core Barrel Assy x 10’ with AW D.R. Box
TT-46 Head Assy with AW D.R. BoxTT-46 Head Assy with 43 mm. D.R. Box
TT-46 Head Assy with AWJ D.R. Box
A
B
18.40 8.35
31.30 14.2018.40 8.3531.30 14.20
18.40 8.35
31.30 14.20
4.20 1.904.20 1.90
4.20 1.90
31000370402Inner Tube - 2’
Inner Tube - 3’31000370403
Inner Tube - 5’31000370405
Inner Tube - 10’31000370410
31000370302Outer Tube - 2’
Outer Tube - 3’31000370303
Outer Tube - 5’31000370305
Outer Tube - 10’31000370310
Inner Tubeextension
31000370400
Core lifter31000370500
Core lifter case31000370550
42010004145Grease fitting
31000370255Nut
Head(See chart)
31000370213Thin washer31000370212Washer31000370211Spacer
31000370245Radial bearing (2)
31000370215Bearing housing
31000370240Axial bearing
31000370210Bearing spacer
31000370245Radial bearing
31000370220Bearing shaft
31000370260Inner tube coupling
Description
AW
Part Number
31000370205
31000370206
3100037020843 mm.
AWJ
HEAD
B
E-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Thread Protector31000370560
F-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSWATER EQUIPMENT SECTION
SECTION F
Compact Water Swivel
Underground Water Swivel
Compact Plus Water Swivel
Universal Water Swivel
NW Heavy Duty Water Swivel
Pressure Relief Valve
Loading Chamber
F-2
F-3
F-4
F-5
F-6
F-7
F-8
COMPACT WATER SWIVEL
Assembly
Weight
Lbs. Kgs.
14.50
1.75
6.60
0.80
Description
Compact Water Swivel Assy with AW Rod Box
Repair Kit
Part Number
44010001000
44010001070
(*) Included in the repair kit
Description
AW Rod pin to AW/L pin
Part Number
34030400404
34030400504
34030400604
ADAPTER SUB
34030400704
AW Rod pin to BW/L pin
AW Rod pin to NW/L pinAW Rod pin to HW/L pin
Another sizes upon request
Cap44010001005
“0” ring (*)44010001010
Spring washer (*)44010001015
“V” packing set (*)44010001020
Wear sleeve (*)44010001025
Packing cage44010001030
“0” ring (*)44010001035
“0” ring (*)44010001045
Spindle44010001040
Body44010001055
Ball bearing (*)44010001050
Felt seal (*)44010001060
Spindle extenxionAW Rod Box44010001065
Adapter(Optional)
Grease fitting42010004145
Connection thread1’’ N.P.T.
F-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Capacity
Rotating Static
Lbs. Kgs. Lbs. Kgs.
500 227 5000 2270
Connection thread1’’ N.P.T.
UNDERGROUND COMPACT WATER SWIVEL
Cap44010001006
“0” ring (*)44010001010
Spring washer (*)44010001015
“V” packing set (*)44010001020
Wear sleeve (*)44010001025
Packing cage44010001030
“0” ring (*)44010001035
“0” ring (*)44010001045
Spindle44010001040
Body44010001055
Ball bearing (*)44010001050
Felt seal (*)44010001060
Spindle extenxionAW Rod Box44010001065
Adapter(Optional)
Description
AW Rod pin to AW/L pin
Part Number
34030400404
34030400504
34030400604
ADAPTER SUB
34030400704
AW Rod pin to BW/L pin
AW Rod pin to NW/L pinAW Rod pin to HW/L pin
Another sizes upon request
Grease fitting42010004145
F-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Assembly
Weight
Lbs. Kgs.
14.50
1.75
6.60
0.80
Description
Compact Water Swivel Assy with AW Rod Box
Repair Kit
Part Number
44010001001
44010001070
(*) Included in the repair kit
Capacity
Rotating Static
Lbs. Kgs. Lbs. Kgs.
500 227 5000 2270
Connection thread1’’ N.P.T.
COMPACT PLUS WATER SWIVEL
Cap44010001005
“0” ring (*)44010001010
Spring washer (*)44010001015
“V” packing set (*)44010001020
Wear sleeve (*)44010001025
Packing cage44010001030
Ball bearing(*)44010001050
Thrust bearing (*)44010001560
“0” ring (*)44010001045
Felt seal (*)44010001060
Spindle extenxionAW Rod Box44010001065
Adapter(Optional) Description
AW Rod pin to AW/L pin
Part Number
34030400404
34030400504
34030400604
ADAPTER SUB
34030400704
AW Rod pin to BW/L pin
AW Rod pin to NW/L pinAW Rod pin to HW/L pin
Another sizes upon request
Grease fitting42010004145
Upper body44010001540
Lower body44010001565
“0” ring (*)44010001035
Spindle44010001550
F-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Assembly
Weight
Lbs. Kgs.
16.7
1.92
7.6
0.87
Description
Compact Water Swivel Assy with AW Rod Box
Repair Kit
Part Number
44010001500
44010001570
(*) Included in the repair kit
Capacity
Rotating Static
Lbs. Kgs. Lbs. Kgs.
10000 4540 20000 9000
UNIVERSAL WATER SWIVEL
BW Rod pin to BW/L pin34030500504
34030500604
34030500704
ADAPTER SUB
BW Rod pin to NW/L pin
BW Rod pin to HW/L pin
Another sizes upon request
Cap44010002005
Compression spring44010002010
“V” packing set (*)44010002015
Spindle nut44010002030
Spacer44010002040
Retaining ring (*)44010002045
Adapter(Optional)
Connection thread1 1/4’’ N.P.T.
“0” ring (*)44010002020
Packing housing44010002025
Locking washer (*)44010002035
Ball bearing (*)44010002050
Spindle extension 44010002055
(*)
Spindle44010002060
Bearing ball thrust (*)44010002065
Body44010002070
Grease fitting42010004145
F-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Assembly
Weight
Lbs. Kgs.
31.5
3.74
14.3
1.7
Description
Universal Water Swivel Assy with 5W Rod Box
Universal Water Swivel Repair Kit
Part Number
44010002000
44010002075
(*) Included in the repair kit
Capacity
Rotating Static
Lbs. Kgs. Lbs. Kgs.
11000 5000 25000 11400
Gland socketcap screw (4)34010001085
NW HEAVY DUTY WATER SWIVEL
Street elbow34010001080
“V” packing set 34010001015
Upper body withbail34010001010
Body socketcap screw (8)34010001020
Adapter(Optional)
34030600504
34030600604
ADAPTER SUB
34030600704
NW Rod pin to BW/L pin
NW Rod pin to NW/L pinNW Rod pin to HW/L pin
Another sizes upon request
ASSEMBLY
Upper packinggland34010001005
Oring 34010001090
Lower packinggland34010001025
Packing glandseal34010001060
Lower bodyseal 34010001065
Retaining ring34010001095
Grease fitting34010001070
Lower body34010001030
Stem thrustbearing 34010001050
Stem W / NW Coupling 34010001035
Upper bodyball bearing34010001055
F-6 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Assembly
Weight
Lbs. Kgs.
54.63 24.80
Description
NW Heavy Duty Water Swivel Assy with NW Rod Box
Part Number
34010001001
Capacity
Rotating Static
Lbs. Kgs. Lbs. Kgs.
12000 5450 30000 13620
PRESSURE RELIEF VALVE
AssemblyWeight
Lbs. Kgs.
7.50 3.4
Description
Relief Valve Assy
Part Number
44011000000
Adjustingscrew44011000010
Special seat44011000050
Connection thread1’’ N.P.T.
ASSEMBLY
Connection thread3/4’’ N.P.T.
Lock nut44011000020
Body44011000080
Spring guide heavyduty44011000070
Spring44011000030
Ball holder heavyduty44011000060
Steel ball (15/16’’)65000000040
F-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
LOADING CHAMBER
Packing Plug(3/16”)44026001050
Packing Plug(1/4”)44026001051
Cable Packing(3/16”)44026001030
Cable Packing(1/4”)44038002020
Cable Guide(3/16”)Washer (2)44026001040
Cable GuideWasher (1/4”)(2)44026001041
Quick Coupler Tip1’’ NPT44026001020
Loading ChamberBody(See Chart)
Description
AW/L Loading Chamber Body
Loading Chamber Body
Part Number
44016001010
44036001020
44026001010
44046001030
BW/L Loading Chamber Body
NW/L Loading Chamber Body
HW/L Loading Chamber Body
Another sizes upon request
Another sizes upon request
F-8 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Part Number
44016001000
44016001001
44036001000
44036001001
44026001000
44026001001
44046001000
44046001001
AssemblyWeight
Lbs. Kgs.
6.00 2.80
Description
A W/L Loading Chamber Assy (3/16”)
A W/L Loading Chamber Assy (1/4”)
B W/L Loading Chamber Assy (1/4”)
5.95
7.00
6.85
2.70
3.20
3.10
8.35 3.80
8.10 3.65
13.00 6.00
12.70 5.80
B W/L Loading Chamber Assy (3/16”)
N W/L Loading Chamber Assy (3/16”)
N W/L Loading Chamber Assy (1/4”)
H W/L Loading Chamber Assy (3/16”)
H W/L Loading Chamber Assy (1/4”)
Quick Delach Female(Optional)44026001025
G-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSRECOVERY TOOLS SECTION
SECTION G
Wireline Rod Tap
Wireline Rod Right Hand Full Grip Tap
Casing Tap
Casing and Drill Rod Tap
Standard Rod and Coupling Tap
Casing and Rod Cutter
G-2
G-3
G-4
G-5
G-6
G-7
G-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRELINE ROD TAP
RIGHT HAND TAPConnection Part Number Weight
A W/LB W/LN W/LH W/LP W/LBTWNTW
Rod Size
A W/LB W/LN W/LH W/LP W/LBTWNTW
34045014010340450110193404501102034045011021340450110223404501660434045016605
2.694.77.512.317.44.948.28
1.21.93.45.67.92.33.8
Lbs. Kgs.
LEFT HAND TAPConnection Part Number Weight
A W/LB W/LN W/LH W/LP W/LBTWNTW
Rod Size
A W/LB W/LN W/LH W/LP W/LBTWNTW
34045014005340450110263404501550534045011028340450110293404501660634045016607
2.694.77.512.34.44.948.28
1.21.93.45.67.92.33.8
Lbs. Kgs.
G-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRELINE ROD FULL GRIP TAP
RIGHT HAND TAP
Connection(Right Hand)
Part Number Weight
B N W/LH W/L
W/L
Tap Size
AWBWBW
340450150063404501600634045017006
6.3111.1617.55
2.95.17.9
Lbs. Kgs.
LEFT HAND TAPConnection(Left Hand)
Part Number Weight
B N W/LH W/L
W/L
Tap Size
AWBWBW
340450150073404501600734045017007
6.3111.1617.55
2.95.17.9
Lbs. Kgs.
G-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
RIGHT HAND TAPConnection Rod Box Part Number Weight
EWAWBWNWHW
Rod Size(Casing)
34045012005
34045011002340450110033404501100434045011005
3404501350534045014505340450155073404501650534045017505
3404501400134045015001
34045018002
3.015.408.5011.2521.65
1.82.53.95.19.8
Lbs. Kgs.EWAWBWNWHW
AWBWNWHWPW
A W/LB W/LN W/LH W/LP W/L
3404501600134045017002
6.108.1511.522.9529.80
2.73.75.210.413.5
LEFT HAND TAP
Connection Rod Box Part Number Weight
EWAWBWNWHW
Rod Size(Casing)
3.015.408.5011.2521.65
1.82.53.95.19.8
Lbs. Kgs.EWAWBWNWHW
AWBWNWHWPW
A W/LB W/LN W/LH W/LP W/L
34045016502 34045017502 34045018502
34045014502 34045015502
6.108.1511.522.9529.80
2.73.75.210.413.5
CASING TAP
G-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CASING AND DRILL ROD TAP
RIGHT HAND TAPConnection Box Part Number Weight
AW - B W/LBW - N W/LNW - H W/L HW PW
Tap Size(Casing)
9.0010.3718.0238.33
4.09 4.71 8.1817.40
Lbs. Kgs.AWNWNWNWNW
3404501400434045015003340450160023404501700134045018500
LEFT HAND TAPConnection Box Part Number Weight
AW - B W/LBW - N W/LNW - H W/L HW PW
Tap Size(Casing)
9.0010.3718.0238.33
4.09 4.71 8.1817.40
Lbs. Kgs.AWNWNWNWNW
3404501400134045015503340450160023404501750134045018501
G-6 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
STANDARD ROD AND COUPLING TAP
RIGHT HAND TAPConnection
(Right Hand)Part Number Weight
EWAWBWNW
Tap Box Size
34045014101340450141023404501410334045014104
1.32.193.896.3
0.60.91.72.9
Lbs. Kgs.EWAWBWNW
LEFT HAND TAPConnection
(Right Hand)Part Number Weight
EWAWBWNW
Tap Box Size
34045014110340450141123404501411434045014113
1.32.193.896.3
0.60.91.72.9
Lbs. Kgs.EWAWBWNW
Piston housingwith box thread
Ball
Piston
Roll pin
Spring
Jaw holder
Jaw pin
Jaw set
Cap screw
Ball release rod
Pilot
ASSEMBLY
Piston HousingBallRoll PinPistonSpringJaw HolderJaw PinJaw SetCap ScrewBall Release RodPilot
Group Description AW Casing /B W/L34035002100
BW Casing / N-W/L34035003100
NW Casing / H W/L34035004100
HW Casing / HW W/L34035006100
34035002120340350021553203008203034035002125340350021403403500211534035002135 (2)34035002105 (2)340350021453403500213034035002110
34035003120340350021553403500316034035003125340350031403403500311534035003135 (2)34035003105 (2)340350031453403500313034035003110
34035004120420200041503403500416034035004125340350041403403500411534035004135 (3)34035004105 (3)340350041503403500413034035004110
34035006100340350041203403500416034035004125340350041403403500411534035004135 (3)34035005105 (3)340350041503403500413034035006105
A
G-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CASING AND ROD CUTTER
A
H-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSHOISTING TOOLS SECTION
SECTION H
AW Hoisting Plug
NW Hoisting Plug
Wireline Cable
Wireline Cable Accessories
H-2
H-3
H-4
H-5
AssemblyWeight
Lbs. Kgs.
10.50 4.80
Description
AW Hosting plug Assy complete
Part Number
34015001000
Swivel eye34015001005
Bearing34015001020
Head W/ bushing34015001015
Support washer34015001025
Lock nut34015001030
Cotter pin42013003035
Body AW box thread34015001010
Adapter (Optional)(See chart)
AW Rod pin to BW/L pin 3403040050434030400604
34030400704
ADAPTER SUB
34030400707
AW Rod pin to NW/L pin
AW Rod pin to HW/L pinAW Rod pin to HWT Casing pin
Another sizes upon request
AW Rod pin to AW/L pin 34030400404
AW Rod pin to HW Casing pin 34030400711
H-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
AW HOISTING PLUG10100 lb
AssemblyWeight
Lbs. Kgs.
16.70 7.60
Description
NW Hosting plug Assy
Part Number
34015002000
NW Rod pin to NW/L pin 3403060060434030600704
34030600707
ADAPTER SUB
34030600711
NW Rod pin to HW/L pin
NW Rod pin to HWT Casing pinNW Rod pin to HW Casing pin
Another sizes upon request
NW Rod pin to BW/L pin 34030600504
Swivel eye34015002005
Lower bearing34015002030
Upper bearing34015002025
Bearing washer support34015002020
Lock nut34015002035
Cotter pin34015002040
Body NW box thread34015002010
Adapter (Optional)(See chart)
Head34015002015
H-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
NW HOISTING PLUG21500lb
H-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE CABLE
Cable 3/16’’ (Rollo x 500 mts)45050010500
45050011000
45050020500
45050021000
Cable 3/16’’ (Rollo x 1000 mts)
Cable 1/4’’ (Rollo x 500 mts)Cable 1/4’’ (Rollo x 1000 mts)
Part Number Description
Cable ½’’45050030000
45050040000 Cable 5/8’’
Part Number DescriptionAircraft cable19x7
Aircraft cable7x19
H-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRELINE CABLE ACCESSORIES
Oval sleeve tool 3/16’’44039000010
44039000050 Oval sleeve tool 1/4’’
Part Number Description
Oval sleeve 1/4’’44039000020
44039000030 Oval sleeve 3/16’’
Part Number DescriptionOval sleeve
Oval sleeve tool
I-1Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTSMISCELLANEOUS
SECTION I
Inner Tube Clinometer
Running Type Clinometer
Straight Pipe Wrench
Full Grip Wrench
Jaws
Chuck Jaws
I-2
I-3
I-4
I-5
I-6
I-7
I-2 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
INNER TUBE CLINOMETER
AssemblyWeight
Lbs. Kgs.
0.70 0.30
Description
A W/L Inner Tube Clinometer Assy
Part Number
34047002005
Container
Test tube
Rubber Stopper
Cap
“0” ring
B W/L Inner Tube Clinometer Assy34047003005
N W/L Inner Tube Clinometer Assy34047004005
H W/L Inner Tube Clinometer Assy34047005005
2.10
4.19
6.33
0.90
1.90
2.90
34047002010 A W/L CapB W/L Cap
N W/L Cap
H W/L Cap
34047003010
3404700401034047005010
Part Number Description
34047002015 A - B W/L Rubber StopperN - H W/L Rubber Stopper34047004015
34047002020 A - B W/L Test TubeN - H W/L Test Tube34047004020
34047002025 A W/L “Oring”B W/L “Oring”
N - H W/L“Oring”
34047003025
34047004025
34047002030 A W/L ContainerB W/L Container
N - H W/L Container
34047003030
34047004030
I-3Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
RUNNING TYPE CLINOMETER
AssemblyWeight
Lbs. Kgs.
1.00 0.40
Description
AQ Running Type Clinometer Assy
Part Number
34047002006
BQ Running Type Clinometer Assy34047003006
NQ Running Type Clinometer Assy34047004006
HQ Running Type Clinometer Assy34047005006
2.20
5.83
8.33
1.00
2.60
3.80
34047002011 A W/L CapB W/L Cap
N W/L Cap
H W/L Cap
34047003011
3404700401134047004011
Part Number Description
34047002015 A - B W/L Rubber StopperN - H W/L Rubber Stopper34047004015
34047002020 A - B W/L Test TubeN - H W/L Test Tube34047004020
34047002025 A W/L “Oring”B W/L “Oring”
N - H W/L “Oring”
34047003025
34047004027
34047002030 A W/L ContainerB W/L Container
N - H W/L Container
34047003030
34047004035
Container
Test tube
Rubber Stopper
Cap
“0” ring
I-4 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
STRAIGHT PIPE WRENCH
AssemblyWeight
Lbs. Kgs.
0.44 0.20
Description
Straight Pipe Wrench x 6’’
Part Number
45010001006
Straight Pipe Wrench x 8’’45010001008
Straight Pipe Wrench x 10’’45010001010
Straight Pipe Wrench x 12’’45010001012
0.81
1.76
2.60
0.37
0.80
1.18
Straight Pipe Wrench x 14’’45010001014 3.63 1.65
45010001018
45010001024
45010001036
45010001048
45010001060
Straight Pipe Wrench x 18’’
Straight Pipe Wrench x 24’’
Straight Pipe Wrench x 36’’
Straight Pipe Wrench x 48’’
Straight Pipe Wrench x 60’
5.79 2.63
9.36 4.25
18.68 8.48
30.79 13.98
45.37 20.60
45010002006 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030064501000400645010005006
Part Number DescriptionSize
6’’
45010002008 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030084501000400845010005008
8’’
10’’
45010002010 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030104501000401045010005010
12’’
45010002012 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030124501000401245010005012
14’’
45010002014 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030124501000401445010005014
18’’
45010002018 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030184501000401845010005018
24’’
45010002024 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030244501000402445010005024
36’’
45010002036 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030364501000403645010005036
48’’
45010002048 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030484501000404845010005048
60’’
45010002060 Wrench NutHeel Jaw & PinCoil & Flat SpringHook Jaw
450100030604501000406045010005060
Hook Jaw
Heel Jaw& Pin
Coil & FlatSpring
Wrench Nut
I-5Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
FULL GRIP WRENCH
INNER TUBEWeight
Lbs. Kgs.
4.30 1.95
Description
A W/L Inner Tube Wrench
Part Number
44037000110
B W/L Inner Tube Wrench44037000120
N W/L Inner Tube Wrench 44037000130
P W/L Inner Tube Wrench44037000140
4.65
7.85
9.20
2.12
3.56
4.18
OUTER TUBEWeight
Lbs. Kgs.
4.70 2.15
Description
A W/L Outer Tube Wrench
Part Number
44037000010
B W/L Outer Tube Wrench44037000020
N W/L Outer Tube Wrench / HQ Inner tube Wrench44037000030
H W/L Outer Tube Wrench44037000040
4.30
8.60
9.30
1.96
3.90
4.24
44037000045 P W/L Outer Tube Wrench 10.50 4.78
DRILL RODSWeight
Lbs. Kgs.
4.70 2.15
Description
A W/L Drill Rods Wrench
Part Number
44037000013
B W/L Drill Rods Wrench44037000023
N W/L Drill Rods Wrench44037000033
H W/L Drill Rods Wrench44037000043
4.30
8.60
9.30
1.96
3.90
4.24
44037000053 P W/L Drill Rods Wrench 10.50 4.78
I-6 Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
JAWS
AssemblyWeight
Lbs. Kgs.
23.46 10.65
Description
A W/L JAW RC60
Part Number
34040001145
B W/L JAW RC6034040001155
N W/L JAW RC6034040001165
H W/L JAW RC6034040001170
23.02
21.04
17.78
10.45
9.55
8.07
HW Casing JAW RC6034040001171 12.27 5.57
1003600009AInsert Chuck Jaw
I-7Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CHUCK JAWS
AssemblyWeight
Lbs. Kgs.
4.75 2.2
Description
Chuck Jaw AW / AXWL / AWL
Part Number
61082255325
Chuck Jaw BX / AW Casing61082255326
Chuck Jaw BW / L61082255330
Chuck Jaw NX / BW Casing61082255333
4.27
3.68
12.80
1.9
1.7
5.80
Chuck Jaw NW / L61082255334 13.10 5.94
Chuck Jaw HW / L61082255337 11.10 5.05
1003600009AInsert Chuck Jaw