229
VUZSERIES
MAIN APPLICATIONS
Available threads BSP - NPT - SAE
1 Bar = 0,1 MPa
Flow rate Up to 1000 L/Min
Oil&Gas
Earth Moving Vehicles
Industry
Hydraulic Equipment
Agriculture
Refrigeration
High Pressure
Chemical & Food Industry
Available sizes from 1/8” to 2”
Standard cracking pressure 0,35 - 4,5 bar
Material High strength carbon steel
Cooling
Possibility to have springs with different
cracking pressures
Piston hardenedwith carbonitring
heat treatment,metal to metal sealing
Body valve in carbon steel zinc plated
Optional hole
The values of pressure drop are referred to check valve totally opened. If the pressure in the circuit is not suffi cient to open totally the valve, the value of pressure drop change.
Sealing description Metal to metal seal
Arrow to indicate fl owdirection
CH
ECK
VA
LVES
Operating pressure Up to 400 bar
TECHNICAL FEATURES AND OPTIONS
BENEFITS
• Optimal wearing resistance of the hardened sealing piston.• Compact slim design.• Different cracking pressure available upon request • Simple to use.
HOW TO USE
• Install the “VUZ” by matching the fl ow direction with the arrow stamped on the valve.
• To ensure a good effi ciency of the system, it is important to select correctly the valve based on fl ow performances, pressure drop and application. See the pressure drop graph.
230
VUZSERIES
Temperature range:from -20 °C to +120 °C ( from -4 °F to +248 °F).Please read carefully “instruction and warning” for proper selection of the products.
Size Series/Size Max. suggested flow Max. operating pressure Burst pressure
Inch l/min GPM MPa psi MPa psi
PERFORMANCES
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
VUZ18
VUZ14
VUZ38
VUZ12
VUZ34
VUZ100
VUZ114
VUZ112
VUZ200
6
24
46
90
148
200
378
600
1000
1,59
6,36
12,19
23,85
39,22
53,00
100,17
159,00
265,00
40
35
35
30
30
30
25
25
15
5800
5075
5075
4350
4350
4350
3625
3625
2175
160
140
140
120
120
120
100
100
45
23200
20300
20300
17400
17400
17400
14500
14500
6525
! WARNING!A defect, a wrong choice or an improper use of products, can cause injury to persons, animals and objects.Make sure that the medium used is compatible with the material as indicate.In case of doubt please contact Stucchi Technical Support.The interchangeability is mentioned under the assumption that the manufacturer of the considered products has not changed any dimension.It is MANDATORY to read and closely follow the instructions. Last updated version always apply at time of installation, see latest written Instructions on Stucchi website (www.stucchi.it) before selecting or using Stucchi products.
231
VUZSERIES
Reference table for different configuration
BSP THREAD NPT THREAD SAE THREAD
BODY CRACKING DESCRIPTIVE CODE ITEM CODE SIZE PRESSURES
1/8”1/4”3/8”1/2”3/4”1”
1 1/4”1 1/2”
2”3/8”3/8”3/8”1/4”3/8”1/2”3/4”1”
3/4”3/4”3/8”1/2”3/4”1/8”1/4”3/8”1/2”3/4”1”
1 1/4”1 1/2”
2”1 1/2”1/2”3/4”3/4”1”
810500100810500101810500102810500103810500104810500105810500106810500107810500108810500109810500110810500111810500200810500201810500202810500203810500204810500300810500301810500302810500303810500304810500400810500401810500402810500403810500404810500405810500406810500407810500408810500500810500602810500603810500600810500601
VUZ18 BSP 5 PSI VUZ14 BSP 5 PSI VUZ38 BSP 5 PSI VUZ12 BSP 5 PSI VUZ34 BSP 5 PSI VUZ100 BSP 5 PSI VUZ114 BSP 5 PSI VUZ112 BSP 5 PSI VUZ200 BSP 5 PSI VUZ38F1.5 BSP 5 PSI VUZ38F2 BSP 5 PSI VUZ38F1 BSP 5 PSI VUZ14 BSP 14 PSI VUZ38 BSP 14 PSI VUZ12 BSP 14 PSI VUZ34 BSP 14 PSI VUZ100 BSP 14 PSI VUZ34 BSP 30 PSI VUZ34 BSP 35 PSI VUZ38 BSP 21 PSI VUZ12 BSP 21 PSI VUZ34 BSP 21 PSI VUZ18 BSP 65 PSI VUZ14 BSP 65 PSI VUZ38 BSP 65 PSI VUZ12 BSP 65 PSI VUZ34 BSP 65 PSI VUZ100 BSP 65 PSI VUZ114 BSP 65 PSI VUZ112 BSP 65 PSI VUZ200 BSP 65 PSI VUZ112 BSP 73 PSI VUZ12 BSP 115 PSI VUZ34 BSP 115 PSI VUZ34 BSP 145 PSI VUZ100 BSP 145 PSI
5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI
14 PSI14 PSI14 PSI14 PSI14 PSI30 PSI35 PSI21 PSI21 PSI21 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI73 PSI115 PSI115 PSI145 PSI145 PSI
BODY CRACKING DESCRIPTIVE CODE ITEM CODE SIZE PRESSURES
1/8”1/4”3/8”1/2”3/4”1”
1 1/4”1 1/2”
2”1/4”3/8”1/2”3/4”1”
1 1/4”1 1/2”
2”
810501100810501101810501102810501103810501104810501105810501106810501107810501108810501401810501402810501403810501404810501405810501406810501407810501408
VUZ18 NPT 5 PSI VUZ14 NPT 5 PSI VUZ38 NPT 5 PSI VUZ12 NPT 5 PSI VUZ34 NPT 5 PSI VUZ100 NPT 5 PSI VUZ114 NPT 5 PSI VUZ112 NPT 5 PSI VUZ200 NPT 5 PSI VUZ14 NPT 65 PSI VUZ38 NPT 65 PSI VUZ12 NPT 65 PSI VUZ34 NPT 65 PSI VUZ100 NPT 65 PSI VUZ114 NPT 65 PSI VUZ112 NPT 65 PSI VUZ200 NPT 65 PSI
5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI
65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI
BODY CRACKING DESCRIPTIVE CODE ITEM CODE SIZE PRESSURES
1/4”3/8”1/2”3/4”1”
1 1/4”1 1/2”
2”3/4”1”
3/8”1/2”3/4”1”
1 1/4”1 1/2”
2
810504100810504101810504102810504103810504104810504105810504106810504107810504300810504400810504401810504402810504403810504404810504405810504406810504407
VUZ14 SAE 5 PSI VUZ38 SAE 5 PSI VUZ12 SAE 5 PSI VUZ34 SAE 5 PSI VUZ100 SAE 5 PSI VUZ114 SAE 5 PSI VUZ112 SAE 5 PSI VUZ200 SAE 5 PSI VUZ34 SAE 30 PSI VUZ100 SAE 65 PSI VUZ38 SAE 65 PSI VUZ12 SAE 65 PSI VUZ34 SAE 65 PSI VUZ14 SAE 65 PSI VUZ114 SAE 65 PSI VUZ112 SAE 65 PSI VUZ200 SAE 65 PSI
5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI5 PSI
30 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI65 PSI
PRODUCT DEFINITION
VUZ 38 F1,5 BSP 5 PSI
Check valve Size 3/8” ThreadDiameter optional hole
Cracking pressure
CH
ECK
VA
LVES
232
OVERALL DIMENSIONS
VALVE
Port description: FEMALE THREAD BSPP (ISO 1179-1)
Descriptive Code Item Code PORT (A) Overall Length Hex Diameter Weight mm inch mm inch mm inch Kg Lbs
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
1,73
2,36
2,76
3,03
3,54
4,17
4,92
5,51
6,30
VUZ18 BSP
VUZ14 BSP
VUZ38 BSP
VUZ12 BSP
VUZ34 BSP
VUZ100 BSP
VUZ114 BSP
VUZ112 BSP
VUZ200 BSP
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
44,0
60,0
70,0
77,0
90,0
106,0
125,0
140,0
160,0
Z
Z
Z
Z
Z
Z
Z
Z
Z
0,55
0,75
0,94
1,18
1,42
1,77
2,17
2,56
2,95
14,0
19,0
24,0
30,0
36,0
45,0
55,0
65,0
75,0
B
B
B
B
B
B
B
B
B
0,64
0,86
1,09
1,36
1,64
2,05
2,50
2,96
3,41
16,2
21,9
27,7
34,6
41,6
52,0
63,5
75,1
86,6
Y
Y
Y
Y
Y
Y
Y
Y
Y
0,08
0,20
0,39
0,66
1,08
1,92
3,28
5,35
6,90
0,04
0,09
0,18
0,30
0,49
0,87
1,49
2,43
3,13
Port description: FEMALE NPT THREAD (ANSI B.1.20.1)
Descriptive Code Item Code PORT (A) Overall Length Wrench Flat Diameter Weight mm inch mm inch mm inch Kg Lbs
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
1,73
2,36
2,76
3,03
3,54
4,17
4,92
5,51
6,30
VUZ18 NPT
VUZ14 NPT
VUZ38 NPT
VUZ12 NPT
VUZ34 NPT
VUZ100 NPT
VUZ114 NPT
VUZ112 NPT
VUZ200 NPT
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
44,0
60,0
70,0
77,0
90,0
106,0
125,0
140,0
160,0
Z
Z
Z
Z
Z
Z
Z
Z
Z
0,55
0,75
0,94
1,18
1,42
1,77
2,17
2,56
2,95
14,0
19,0
24,0
30,0
36,0
45,0
55,0
65,0
75,0
B
B
B
B
B
B
B
B
B
0,64
0,86
1,09
1,36
1,64
2,05
2,50
2,96
3,41
16,2
21,9
27,7
34,6
41,6
52,0
63,5
75,1
86,6
Y
Y
Y
Y
Y
Y
Y
Y
Y
0,08
0,20
0,39
0,66
1,08
1,92
3,28
5,35
6,90
0,04
0,09
0,18
0,30
0,49
0,87
1,49
2,43
3,13
Port description: FEMALE SAE THREAD (ISO 11926-1 & SAE J1926-1)
Descriptive Code Item Code PORT (A) Overall Length Wrench Flat Diameter Weight mm inch mm inch mm inch Kg Lbs
7/16-20UNF
9/16-18UNF
3/4-16UNF
1-1/16-12UN
1-5/16-12UN
1-5/8-12UN
1-7/8-12UN
2-1/2-12UN
2,36
2,76
3,03
3,70
4,17
4,92
5,51
6,30
VUZ14 SAE
VUZ38 SAE
VUZ12 SAE
VUZ34 SAE
VUZ100 SAE
VUZ114 SAE
VUZ112 SAE
VUZ200 SAE
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
see reference table
60,0
70,0
77,0
94,0
106,0
125,0
140,0
160,0
Z
Z
Z
Z
Z
Z
Z
Z
0,75
0,94
1,18
1,42
1,77
2,17
2,56
2,95
19,0
24,0
30,0
36,0
45,0
55,0
65,0
75,0
B
B
B
B
B
B
B
B
0,86
1,09
1,36
1,64
2,05
2,50
2,96
3,41
21,9
27,7
34,6
41,6
52,0
63,5
75,1
86,6
Y
Y
Y
Y
Y
Y
Y
Y
0,22
0,42
0,69
1,08
1,92
3,28
5,31
6,60
0,10
0,19
0,32
0,49
0,87
1,49
2,41
3,00
For complete technical information see www.stucchi.it or contact [email protected] - STUCCHI S.p.A. - May 2016 - All right reserved.The texts, data and illustrations indicated in this catalogue, may be changed by Stucchi S.p.A at any time without notice. (CAT VUZ - EN REV.1).
VUZSERIES