12” - 24” rim dia wheel bracket Compact sensor armPush - Pull Runout compensation
PULL
PULL
CENTERPUSH
PUSH
90º90º
MANATEC. . . In Technology state of mind
®
C
CCD Wheel Aligner
CCD-Infra Red wireless technology for data acquisition.
RF Zigbee technology for data communication to main console.
Measures all wheel alignment parameters with excellent range and accuracy.
RF TECHNOLOGYManatec RF wheel aligners are known for it's measurement accuracy, user friendly software and its ability to perform quick wheel alignment
thereby generating higher returns to customer. Its affordability and easy serviceability due to optimized design makes these
aligners to be the most preferred.
Fully loaded Premium Aligner with 8 CCD cameras & 6 Inclinometers, TFT Monitor, mobile cabinet with PC & printer and space for accommodating tools.
Economy Aligner with 6 CCD cameras & 6 Inclinometers, TFT Monitor, mobile cabinet with PC & printer. Available with or without Push Pull Runout (PPR) feature.
R pac Premium Plus (8x6) PPR
R pac Premium Plus (8x6) H
R pac Premium (6x6) PPRR pac Premium (6x6)
For Aligning Buses, Trucks & Other Heavy Commercial Vehicles
Buses Trucks OthersFully loaded Premium Aligner with 8 CCD cameras & 6 Inclinometers, TFT Monitor, mobile cabinet with PC & printer and space for accommodating tools.
Supplied with special HCV software along with Accessories suitable for Buses & Trucks. Capable of aligning passenger cars also.
Multi Axle Configuration
WIRELESS TECHNOLOGYDATA COMMUNICATION TO MAIN UNIT THROUGH RF @ 2.4 Ghz.
WITH 100 MT. RADIUS
Zigbee is a highly reliable RF transmission technology, which ensures 100% data transmission upto 100 mt. radius and is superiorto Bluetooth.
DATA ACQUISITION THROUGHCCD INFRA-RED TECHNOLOGY
Special software for adjusting the camber in jacked up condition. Operator can easily access the adjustment points and tighten or loosen the bolts. Significant savings in valuable alignment time.
Adjustment of in Jacked up conditionCamber
significantsavings
Spoiler ProgramUnique spoiler program to perform alignment on low body vehicles upto 3º
30’ (31mm) tilt. Sensor heads can further be lowered by 128mm using wheel
bracket sliding mechanism for 24” wheel rim, useful for low chassis vehicles.
Pre-loading condition
Special input screen for feeding Ride height specifications, which is critical for specific vehicles like Mercedes Benz.
Ride height condition
PULL
PULL
CENTERPUSH
PUSH
90º90º
Push - Pull Runout Unique quick alignment procedure to reduce alignment time by skipping through some screens, saves 3 minutes.
Quick alignment programRunout of all four wheels are measured and displayed simultaneously in a single Push-Pull without jacking up the vehicle. Results in 5 minutes saving of alignment time.
5 minutessavings
3 minutessavings
SAVE ALIGNMENT TIME - INCREASE REVENUE
Quick Wheel AlignmentProgram
Exclusive screen for entering data on pre-alignment set up and pre-loading position, for specific vehicles like BMW.
Measurement parameters Range Accuracy
Camber (Front / Rear)
Caster (Front) ± 20° 00' ± 00° 05'
Kingpin Inclination ± 20° 00' ± 00° 05'
Toe (Front / Rear) ± 05° 00' ± 00° 02'
Total Toe ± 10° 00' ± 00° 04'
Setback (Front) ± 05° 00' ± 00° 02'
Thrust angle ± 05° 00' ± 00° 02'
Runout (Front / Rear) ± 10° 00' ± 00° 02'
Included angle ± 30° 00' ± 00° 05'
Rear Setback # ± 05° 00' ± 00° 02'
Track width difference # ± 02° 00' ± 00° 04'
Lock angle ± 60° 00' ± 00° 20'
Toe Out on Turns ± 60° 00' ± 00° 20'
Power supply 230V AC, 50Hz.
Power 200W
Sensor arm Battery 6V, 7.2 AH
Operating temperature 0º - 50ºC
Battery backup time > 12 hours
± 10° 00' ± 00° 02'
(Optional)
(Optional)
Technical Specifications
# Feature not available in (6x6) models.
International vehicle data base with more than 20000 vehicle data including American & European data. User can also add, modify & delete data.
Vehicle Data
18
2 m
m
15
1 m
m
31
mm
On-line correction mode helps the operatorto correct the alignment with easy 3 color bar code identification.
High Resolution Graphics Animated Graphics 3 Color Bar Code Correction
3D & 2D Pictorial Printout helps users to understand & compare alignment results.
High Resolution graphics gives a crystal clear clarity & viewability from a long distance.
User friendly step by step alignment instructions are given by animated 3D graphics.
WHEEL ALIGNMENT PRINTOUT
l2 Pairs of Wheel bracket (12” - 24”)
l1 Pair of Rotary Plate - LCV (2 ton)
l1 Steering Lock
l1 Brake Pedal Lock - LCV
l1 PC with TFT Monitor, Keyboard & Mouse
l1 Wheel Alignment & Data Manager Software
l4 Nos of Rotary plate arresting spacer (Not applicable for R pac Premium (6x6))
Standard Accessories
l1 A4 Color Inkjet / Laser Printer
l1 Pair of Multimedia Speaker
l1 Pair of Electronic Rotary Plate (2 Ton)
l1 Pair of Short Rear wheel slider
l1 Pair of Long Rear wheel slider
l1 Set of Sensor arm cable
Optional Accessories
Measuring Heads
Light & sleek measuring heads with membranekey pad eliminates frequent movement of operator between vehicle and the machine. CMOS components used in the design to reduce power consumption.
remote control
Version - 1.0 October 2011Rights of design & specification changes reserved.
Bahour Main Road, Karikalampakkam, Puducherry - 605 007, INDIA & 0413 - 2664000 (100 lines) Fax : 0413 - 2664099u u
C-22 & 23, Industrial Estate, Thattanchavady, Puducherry - 605 009. INDIA.Ph : 0413 - 2248926 u Fax : 0413 - 2243222 u Email : [email protected] u www.manatec.net
FACTORY :
REGD OFFICE :
ZONAL OFFICES : NEW DELHI : 011 - 32984429 / 42482405 Email : [email protected]
KOLKATA : 033 - 32969202 Email : [email protected]
MUMBAI : 022 - 32521673 / 24030458 Email : [email protected]
CHENNAI : 044 - 32924066 / 42328032 Email : [email protected]
BANGALORE : 080 - 32908414 / 22249864 Email : [email protected] : 093446 43133 Email : [email protected] : 094351 09351 Email : [email protected]
MADURAI : 0452 - 2341151 Email : [email protected]
INDORE : 0731 - 2551243 Email : [email protected]
MANATEC
