Date post: | 18-Jan-2016 |
Category: |
Documents |
Upload: | maria-harper |
View: | 216 times |
Download: | 0 times |
CCNA 1 v3.0 Module 7Ethernet Technologies
Purpose of This PowerPoint
This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0.It was created to give instructors a PowerPoint to take and modify as their own.This PowerPoint is: NOT a study guide for the module final
assessment. NOT a study guide for the CCNA certification
exam.Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.
To Locate Instructional Resource Materials on Academy Connection:
Go to the Community FTP Center to locate materials created by the instructor communityGo to the Tools sectionGo to the Alpha Preview sectionGo to the Community link under ResourcesSee the resources available on the Class home page for classes you are offeringSearch http://www.cisco.com Contact your parent academy!
Objectives
10-Mbps and 100-Mbps EthernetGigabit and 10-Gigabit Ethernet
Types of Ethernet
Parameters for 10 Mbps Ethernet Operation
10BASE5 Architecture Example
10BASE2 Network Design Limits
10BASE-T Modular Jack Pinouts
10BASE-T Repeated Network Design Limits
Parameters for 100-Mbps Ethernet Operation
100BASE-TX Modular Jack Pinout
1000BASE-FX Pinout
Example of Architecture Configuration and Cable Distances
Parameters for Gigabit Ethernet Operation
Outbound (Tx) 1000Base-T Signal
1000BASE-SX and LX
Gigabit Ethernet Media Comparison
Gigabit Ethernet ArchitectureMaximum 1000BASE-SX Cable Distances
Maximum 1000BASE-LX Cable Distances
Parameters for 10-Gbps Ethernet Operation
10-Gigabit Ethernet Implementations
Future of EthernetThe Expanding Scope of Ethernet