1
CCNA 2 Module 2 Introduction to Routers
2 2 2 © 2003, Cisco Systems, Inc. All rights reserved.
Purpose of This PowerPoint
• This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0.
• It was created to give instructors a PowerPoint to take and modify as their own.
• This PowerPoint is:
NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
• Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.
3 3 3 © 2003, Cisco Systems, Inc. All rights reserved.
To Locate Instructional Resource Materials on Academy Connection:
• Go to the Community FTP Center to locate materials created by the instructor community
• Go to the Tools section
• Go to the Alpha Preview section
• Go to the Community link under Resources
• See the resources available on the Class home page for classes you are offering
• Search http://www.cisco.com
• Contact your parent academy!
4 4 4 © 2003, Cisco Systems, Inc. All rights reserved.
Objectives
• Operating Cisco IOS Software
• Starting a router
5 5 5 © 2003, Cisco Systems, Inc. All rights reserved.
Purpose of Cisco IOS Software
• Basic routing and switching functions
• Reliable and secure access to networked resources
• Network scalability
6 6 6 © 2003, Cisco Systems, Inc. All rights reserved.
Router User Interface
7 7 7 © 2003, Cisco Systems, Inc. All rights reserved.
Router User Interface Modes
8 8 8 © 2003, Cisco Systems, Inc. All rights reserved.
Cisco IOS Naming Conventions
9 9 9 © 2003, Cisco Systems, Inc. All rights reserved.
show flash Command
10 10 10 © 2003, Cisco Systems, Inc. All rights reserved.
Steps in Router Initialization
11 11 11 © 2003, Cisco Systems, Inc. All rights reserved.
Using the setup Command
12 12 12 © 2003, Cisco Systems, Inc. All rights reserved.
Router LED Indicators
Cisco routers use LED indicators to provide
status information. Depending on the Cisco
router model, the LED indicators vary.
13 13 13 © 2003, Cisco Systems, Inc. All rights reserved.
Examining Initial Bootup Output
14 14 14 © 2003, Cisco Systems, Inc. All rights reserved.
Examining Initial Bootup Output continued
15 15 15 © 2003, Cisco Systems, Inc. All rights reserved.
Examining Initial Bootup Output continued
16 16 16 © 2003, Cisco Systems, Inc. All rights reserved.
Establishing a Hyperterminal Session
• All Cisco routers include an EIA/TIA-232 asynchronous serial console port (RJ-45).
• Cables and adapters are needed to connect a console terminal (an ASCII terminal or PC running terminal emulation software) to the console port.
17 17 17 © 2003, Cisco Systems, Inc. All rights reserved.
Router Modes
18 18 18 © 2003, Cisco Systems, Inc. All rights reserved.
User Mode Commands
19 19 19 © 2003, Cisco Systems, Inc. All rights reserved.
Privileged Mode Commands
20 20 20 © 2003, Cisco Systems, Inc. All rights reserved.
clock set Command
21 21 21 © 2003, Cisco Systems, Inc. All rights reserved.
Using IOS Command history
22 22 22 © 2003, Cisco Systems, Inc. All rights reserved.
The User Interface Error Indicator
23 23 23 © 2003, Cisco Systems, Inc. All rights reserved.
The show version Command