CERTIFICATE Certificate registration No. 70 900 3744 Audit report No. 4240 2683 Valid until 2014-11-28 Page 1 of 1. This certification was conducted in accordance with the TÜV PROFiCERT-plus auditing and certification procedures and is subject to regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram. TÜV Technische Überwachung Hessen GmbH, Rüdesheimerstr. 119, D-64285 Darmstadt, Tel. +49 6151/600331 Design, construction and installation of carpentry structures for civil and industrial technologic systems; medium-heavy metal carpentry manoworks for the construction field. EA-Scope 17/2 Carpenteria Partegiani s.r.l. Via Mascheroni, 8 I - 20090 Trezzano sul Naviglio (MI) meets the defined requirements of the TÜV PROFiCERT-plus method according EN ISO 3834-2:2005 (Comprehensive quality requirements for fusion welding of metallic materials) The requirements are formulated by a questionnaire for systems and processes and were revised by an audit. This certificate is not a proof for the compliance with all legal requirements and/or product properties. It shall be valid for the following scope: Darmstadt, 2011-11-29 Certification Body of TÜV Hessen - Certification manager -
Transcript
CERTIFICATE
Certificate registration No. 70 900 3744
Audit report No. 4240 2683
Valid until 2014-11-28
Page 1 of 1. This certification was conducted in accordance with the TÜV PROFiCERT-plus auditing and certification procedures and is subject to
regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram. TÜV Technische Überwachung Hessen GmbH, Rüdesheimerstr. 119, D-64285 Darmstadt, Tel. +49 6151/600331
Design, construction and installation of carpentry structures for civil and industrial technologic systems; medium-heavy metal carpentry manoworks
for the construction field.
EA-Scope 17/2
Carpenteria Partegiani s.r.l.Via Mascheroni, 8
I - 20090 Trezzano sul Naviglio (MI)
meets the defined requirements of the TÜV PROFiCERT-plus method according
EN ISO 3834-2:2005 (Comprehensive quality requirements for fusion welding of metallic materials)
The requirements are formulated by a questionnaire for systems and processes and were revised by an audit. This certificate is not a proof for the compliance with all legal requirements and/or product properties. It shall be valid for the following scope:
Darmstadt, 2011-11-29 Certification Body of TÜV Hessen
- Certification manager -
CERTIFICATO
adempie ai requisiti fissati dal TÜV per il procedimento PROFiCERT-plus
EN ISO 3834-2:2005 (Requisiti di qualità per la saldatura per fusione dei materiali metallici)
I requisiti sono formulati in un catalogo di domande inerenti sistemi e processi e sono stati controllati in un audit. Questa certificazione non documenta il comprovato adempimento di determinate norme previste dalla legge e/o le proprietà del prodotto. Ha validità per i seguenti campi di applicazione:
No registrazione certificato 70 900 3744
Rapporto di Audit 4240 2683
Valido fino al 2014-11-28
Darmstadt, 2011-11-29 Organismo di Certificazione del TÜV Hessen
- Responsabile della certificazione -
Pagina 1 / 1 Questa certificazione è stata eseguita secondo la procedura TÜV PROFiCERT-plus per verifiche e certificazioni e viene periodicamente sorvegliata.
