Certification - Waterworks Wholesale...Stainless Steel Compression Fittings Allowable stress value...

Smarter pipeline solutions.

EN10204 3.1 Certifications Available

The Intelligent Choicein Compression Fittings

Certification

A Perfect Connection Every Time

VIS-LOK Advantages » Quick installation » Assurance at every connection » No inspection gauge or markers required » Easy and assured installation even for non-experienced installers » Eliminate over and under tightening issues » No more guess work, leaking systems, downtime, and costly repairs

1 2

Insert tube into the fittings fully and then finger-tighten the nut.

Tighten with appropriate tools until check ring comes off.

Installation Procedure

Stainless Steel Compression Fittings

Allowable stress value between -200F and 1000F (-28.90C ~ 37.80C) is 19,500 psi safety factor is 4 (Ultimate tensile strength is 70,000 psi)

» The above data is based on the minimum wall thickness and the maximum O.D. allowed under the standard of ASTM A269.

» The dimensions do not allow for erosion or corrosion.

Check Ring & Identification Ring Colour- Check Ring Identification Ring

Imperial Red BlueMetric Orange Green

Tube O.D (inch)

Tube Wall Thickness (inch)0.010 0.012 0.014 0.016 0.020 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120

1/16 5600 6800 8100 9400 120001/8 8500 10900

3/16 5400 7000 102001/4 4000 5100 7500 10200

5/16 4000 5800 80003/8 3300 4800 65001/2 2600 3700 5100 67005/8 2900 4000 5200 60003/4 2400 3300 4200 4900 58007/8 2000 2800 3600 4200 48001 2400 3100 3600 4200 4700

Tube O.D (mm)

Tube Wall Thickness (mm)0.71 0.89 1.00 1.25 1.50 1.65 2.00 2.11 2.41 2.50 2.77 3.00 3.05

3 10800 13800 153004 7900 10100 11500 144006 5000 6500 7400 9400 11500 127008 4700 5800 6800 8400 9300

10 3700 4200 5300 6500 730012 3000 3400 4400 5300 5900 6800 720016 2500 3200 3900 4300 5300 5700 6600 680018 2800 3400 3800 4700 5000 5800 6000 670020 2500 3000 3400 4200 4400 5100 5300 600022 2300 2800 3000 3800 4000 4600 4800 540025 2000 2400 2700 3300 3500 4000 4200 4700 5100 5200

Stainless Steel Tubing Pressure Ratings - Based on ASTM A269Stainless steel tubing which is high quality, fully annealed and seamless ASTM A269, A213 or equivalent is recommended.

Stainless Steel Imperial Tube

Stainless Steel Metric Tube

Tube working pressure (psi)

Tube working pressure (psi)

StructureBODYFRONT FERRULEBACK FERRULENUTIDENTIFICATION RINGCHECK RING

1 6 4 2 351

2

3

4

5

6

Technical Information

Compatibility

VIS-LOK tube fittings are designed and manufactured to be interchangeable with other tube fittings manufactured by other industry leading manufacturers. When required compatibility testing can be performed by an independent third party and the reports can be provided.

Hardness Limitation

High quality stainless steel tubing that is fully annealed; Seamless or Welded per ASTM A269, A213 or equivalent should be used with VIS-LOK tube fittings. The tubing must not exceed a maximum hardness of HRB 90 on the Rockwell Scale. HRB 80 is more suitable for bending and offers a greater difference in hardness to the ferrules. This difference in hardness offers more ease in assembly and better interaction between the ferrules and the tubing.

Vacuum, Cryogenic and High Temperature Applications

VIS-LOK fittings have been tested in vacuum, cryogenic and high temperatures insuring repeatable and reliable performance in the severest of applications.

Gas System Applications

VIS-LOK tube fittings are appropriate for gas systems.

For All Applications

Tubing hardness must be less than that of the ferrules.

Tubing should be free of surface imperfections, defects and round in shape.

Select appropriate wall thickness.

Tubing ends must be cut squarely and perpendicular to the center-line of the tubing. After the tubing is cut it must be deburred on both the inside and outside with a high quality fully sharpened deburring tool.

Follow the VIS-LOK installation instructions.

Do not attempt to bend the tubing after a fitting has been installed in a fixed position.

Tubing systems should be installed to allow for adequate expansion and contraction as well as ease of maintenance.

VIS-LOK Warranty

VIS-LOK tube fittings shall be free from defects in material and workmanship for the life time of the product.

The purchaser’s solutions shall be limited to replacement of any parts that fail through a defect in material or workmanship.

Importer of quality, innovative pipeline solutions.6


Index

UNION

BULKHEAD REDUCING UNION

FEMALE CONNECTOR

UNION ELBOW

FEMALE ELBOW

MALE BRANCH TEE

FEMALE RUN TEE

REDUCING UNION

MALE CONNECTOR

GAUGE CONNECTOR

MALE ELBOW

UNION TEE

MALE RUN TEE

UNION CROSS

BULKHEAD UNION

BULKHEAD FEMALE CONNECTOR

45 MALE ELBOW

REDUCING UNION TEE

FEMALE BRANCH TEE

REDUCER

BULKHEAD MALECONNECTOR

VISUI 8

VISBHRUI 10

VISFCI 21-24

VISUEI 27

VISFEI 33-35

VISMBTI 38-39

VISFRTI 44-45

VISRUI 9

VISMCI 11-15

VISMEI 28-31

VISUTI 36

VISMRTI 40-41

VISUCI 46

VISBHUI 10

VISFCBI 26

VISHMEI 32

VISRUTI 37

VISFBTI 42-43

VISRI 47-49

VISMCBI 20

MALE TUBE ADAPTOR

AN UNION

VISMA 50-51

VISFA 52-53 VISAUI 54

AN TUBE ADAPTOR

MALE O-SEAL PIPE THREAD CONNECTOR

VISAA 54

VISOSCI 54 VISOPCI 55SAE/MSMALE CONNECTOR

VISSMCI 55

FEMALE TUBE ADAPTOR

MALE O-SEAL STRAIGHT THREAD CONNECTOR

MALE CONNECTOR BSPP(FOR BONDED WASHER SEAL)

VISGMCI 16-17

MALE CONNECTOR BSPP(FOR METAL GASKET SEAL)

VISMCI 18-19

VISGCI 25

Talk to our team now about your piping projects 0800 387 677 7


ANSIFLANGE ADAPTOR

FRONT FERRULE

BONDED WASHER SEALBACK FERRULE COPPER GASKET

NUT FERRULE SET

VISFLAI 58

VISFF 61

VISIBGI 63VISBF 62 VISIPGI 63

VISIN 59 VISFS 60

1/8” Stainless SteelCompression Fittings

1-1/4”, 1-1/2” & 2” Stainless SteelCompression Fittings

Seamless Stainless Steel Tube

Stainless Steel Threaded High Pressure Pipe Fittings

Tube Tooling

Clips And Tube Supports

64-67

68

69

70-75

76-77

78

79-80

Valving

Index

CAP

VISP 57 VISCI 57

PLUG

For Full Range See Page









UNION

Code Description

Imperial

VISUI-4 VIS-LOK Union 316 Stainless Steel 1/4" O.D Tube






VISUI-16 VIS-LOK Union 316 Stainless Steel 1" O.D Tube

Metric

VISUI-6M VIS-LOK Union 316 Stainless Steel 6mm O.D Tube












REDUCING UNION

Code Description

Imperial

VISRUI-4-6M VIS-LOK Reducing Union 316 Stainless Steel 1/4" x 6mm O.D Tube

VISRUI-6-8M VIS-LOK Reducing Union 316 Stainless Steel 3/8" x 8mm O.D Tube

VISRUI-6-4 VIS-LOK Reducing Union 316 Stainless Steel 3/8" x 1/4" O.D Tube









VISRUI-16-8 VIS-LOK Reducing Union 316 Stainless Steel 1" x 1/2" O.D Tube

VISRUI-16-12 VIS-LOK Reducing Union 316 Stainless Steel 1" x 3/4" O.D Tube

Metric

VISRUI-8M-6M VIS-LOK Reducing Union 316 Stainless Steel 8mm x 6mm O.D Tube













BULKHEAD UNION

Code Description

Imperial

VISBHUI-4 VIS-LOK Bulkhead Union 316 Stainless Steel 1/4" O.D Tube






VISBHUI-16 VIS-LOK Bulkhead Union 316 Stainless Steel 1" O.D Tube

Metric

VISBHUI-6M VIS-LOK Bulkhead Union 316 Stainless Steel 6mm O.D Tube









BULKHEAD REDUCING UNION

Code Description

Imperial

VISBHRUI-4-2 VIS-LOK Bulkhead Reducing Union 316 Stainless Steel 1/4" x 1/8" O.D Tube









Metric Bulkhead Reducing Unions also available



MALE CONNECTOR

Code Description

Imperial BSPT

VISMCI-4-2R VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT





VISMCI-4-16R VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1" BSPT























VISMCI-16-8R VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1/2" BSPT

VISMCI-16-12R VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISMCI-16-16R VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1" BSPT



MALE CONNECTOR

Code Description

Imperial NPT

VISMCI-4-2N VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT





VISMCI-4-16N VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1" NPT























VISMCI-16-8N VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1/2" NPT

VISMCI-16-12N VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISMCI-16-16N VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1" NPT



MALE CONNECTOR

Code Description

Metric BSPT

VISMCI-6M-2R VIS-LOK Male Connector 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT




























VISMCI-22M-16R VIS-LOK Male Connector 316 Stainless Steel 22mm O.D Tube x 1" BSPT



VISMCI-25M-16R VIS-LOK Male Connector 316 Stainless Steel 25mm O.D Tube x 1" BSPT



MALE CONNECTOR

Code Description

Metric NPT

VISMCI-6M-2N VIS-LOK Male Connector 316 Stainless Steel 6mm O.D Tube x 1/8" NPT




























VISMCI-22M-16N VIS-LOK Male Connector 316 Stainless Steel 22mm O.D Tube x 1" NPT



VISMCI-25M-16N VIS-LOK Male Connector 316 Stainless Steel 25mm O.D Tube x 1" NPT



MALE CONNECTOR BORED-THROUGH

Code Description

Imperial BSPT

VISMCI-4-2RTM VIS-LOK Male Connector Bored-Through 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT



VISMCI-4-8RTM VIS-LOK Male Connector Bored-Through 316 Stainless Steel 1/4” O.D Tube x 1/2” BSPT

Imperial NPT

VISMCI-4-2NTM VIS-LOK Male Connector Bored-Through 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT




Metric BSPT

VISMCI-6M-2RTM VIS-LOK Male Connector Bored-Through 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT




Metric NPT

VISMCI-6M-2NTM VIS-LOK Male Connector Bored-Through 316 Stainless Steel 6mm O.D Tube x 1/8" NPT




Bored-Through Fittings for Thermocouples

VIS-LOK Bored-Through MALE CONNECTORS accommodate thermocouples or dip tubes.

Note - The root diameter of the pipe thread end of male connectors makes it impractical to bore through all male connectors.



MALE CONNECTOR (FOR BONDED WASHER SEAL)

Code Description

Imperial BSPP

VISGMCI-4-2G VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPP











VISGMCI-8-16G VIS-LOK Male Connector 316 Stainless Steel 1/2" O.D Tube x 1" BSPP



VISGMCI-12-16G VIS-LOK Male Connector 316 Stainless Steel 3/4" O.D Tube x 1" BSPP

VISGMCI-16-8G VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1/2" BSPP

VISGMCI-16-12G VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 3/4" BSPP

VISGMCI-16-16G VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1" BSPP

For Bonded Washer Seals see page: 63



MALE CONNECTOR (FOR BONDED WASHER SEAL)

Code Description

Metric BSPP

VISGMCI-6M-2G VIS-LOK Male Connector 316 Stainless Steel 6mm O.D Tube x 1/8" BSPP










VISGMCI-10M-8G "VIS-LOK Male Connector 316 Stainless Steel 10mm O.D Tube x 1/2"" BSPP












VISGMCI-22M-16G VIS-LOK Male Connector 316 Stainless Steel 22mm O.D Tube x 1" BSPP


VISGMCI-25M-16G VIS-LOK Male Connector 316 Stainless Steel 25mm O.D Tube x 1" BSPP

For Bonded Washer Seals see page: 63



MALE CONNECTOR (FOR METAL GASKET SEAL)

Code Description

Imperial BSPP

VISMCI-4-2GM VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPP















VISMCI-12-16GM VIS-LOK Male Connector 316 Stainless Steel 3/4" O.D Tube x 1" BSPP

VISMCI-16-8GM VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1/2" BSPP

VISMCI-16-12GM VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 3/4" BSPP

VISMCI-16-16GM VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1" BSPP

For Copper Gaskets see page: 63



MALE CONNECTOR (FOR METAL GASKET SEAL)

Code Description

Metric BSPP

VISMCI-6M-2GM VIS-LOK Male Connector 316 Stainless Steel 6mm O.D Tube x 1/8" BSPP























VISMCI-25M-16GM VIS-LOK Male Connector 316 Stainless Steel 25mm O.D Tube x 1" BSPP

For Copper Gaskets see page: 63



BULKHEAD MALE CONNECTOR

Code Description

Imperial BSPT

VISMCBI-4-2R VIS-LOK Bulkhead Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT








VISMCBI-16-16R VIS-LOK Bulkhead Male Connector 316 Stainless Steel 1" O.D Tube x 1" BSPT

Imperial NPT

VISMCBI-4-2N VIS-LOK Bulkhead Male Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT








VISMCBI-16-16N VIS-LOK Bulkhead Male Connector 316 Stainless Steel 1” O.D Tube x 1” NPT

Metric Bulkhead Male Connectors also available



FEMALE CONNECTOR

Code Description

Imperial BSPT

VISFCI-4-2R VIS-LOK Female Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT



















VISFCI-16-12R VIS-LOK Female Connector 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISFCI-16-16R VIS-LOK Female Connector 316 Stainless Steel 1" O.D Tube x 1" BSPT



FEMALE CONNECTOR

Code Description

Imperial NPT

VISFCI-4-2N VIS-LOK Female Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT



















VISFCI-16-12N VIS-LOK Female Connector 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISFCI-16-16N VIS-LOK Female Connector 316 Stainless Steel 1" O.D Tube x 1" NPT



FEMALE CONNECTOR

Code Description

Metric BSPT

VISFCI-6M-2R VIS-LOK Female Connector 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT






















VISFCI-22M-16R VIS-LOK Female Connector 316 Stainless Steel 22mm O.D Tube x 1" BSPT


VISFCI-25M-16R VIS-LOK Female Connector 316 Stainless Steel 25mm O.D Tube x 1" BSPT



FEMALE CONNECTOR

Code Description

Metric NPT

VISFCI-6M-2N VIS-LOK Female Connector 316 Stainless Steel 6mm O.D Tube x 1/8" NPT






















VISFCI-22M-16N VIS-LOK Female Connector 316 Stainless Steel 22mm O.D Tube x 1" NPT


VISFCI-25M-16N VIS-LOK Female Connector 316 Stainless Steel 25mm O.D Tube x 1" NPT



GAUGE CONNECTOR

Code Description

Imperial BSPP

VISGCI-4-4G VIS-LOK Female Connector 316 Stainless Steel 1/4" O.D Tube x 1/4" BSPP (Gauge Thread)









Metric BSPP

VISGCI-6M-4G VIS-LOK Female Connector 316 Stainless Steel 6mm O.D Tube x 1/4" BSPP (Gauge Thread)














BULKHEAD FEMALE CONNECTOR

Code Description

Imperial BSPT

VISFCBI-4-2R VIS-LOK Bulkhead Female Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT






Imperial NPT

VISFCBI-4-2N VIS-LOK Bulkhead Female Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT






Metric Bulkhead Female Connectors also available



UNION ELBOW

Code Description

Imperial

VISUEI-4 VIS-LOK Union Elbow 316 Stainless Steel 1/4" O.D Tube






VISUEI-16 VIS-LOK Union Elbow 316 Stainless Steel 1" O.D Tube

Metric

VISUEI-6M VIS-LOK Union Elbow 316 Stainless Steel 6mm O.D Tube












MALE ELBOW

Code Description

Imperial BSPT

VISMEI-4-2R VIS-LOK Male Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT





















VISMEI-12-16R VIS-LOK Male Elbow 316 Stainless Steel 3/4" O.D Tube x 1" BSPT

VISMEI-16-8R VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 1/2" BSPT

VISMEI-16-12R VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISMEI-16-16R VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 1" BSPT



MALE ELBOW

Code Description

Imperial NPT

VISMEI-4-2N VIS-LOK Male Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT





















VISMEI-12-16N VIS-LOK Male Elbow 316 Stainless Steel 3/4" O.D Tube x 1" NPT

VISMEI-16-8N VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 1/2" NPT

VISMEI-16-12N VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISMEI-16-16N VIS-LOK Male Elbow 316 Stainless Steel 1" O.D Tube x 1" NPT



MALE ELBOW

Code Description

Metric BSPT

VISMEI-6M-2R VIS-LOK Male Elbow 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT




















VISMEI-25M-16R VIS-LOK Male Elbow 316 Stainless Steel 25mm O.D Tube x 1" BSPT



MALE ELBOW

Code Description

Metric NPT

VISMEI-6M-2N VIS-LOK Male Elbow 316 Stainless Steel 6mm O.D Tube x 1/8" NPT



















VISMEI-25M-16N VIS-LOK Male Elbow 316 Stainless Steel 25mm O.D Tube x 1" NPT



45 MALE ELBOW

Code Description

Imperial BSPT

VISHMEI-4-2R VIS-LOK 45 Male Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT







Imperial NPT

VISHMEI-4-2N VIS-LOK 45 Male Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT







Metric 45 Male Elbows also available



FEMALE ELBOW

Code Description

Imperial BSPT

VISFEI-4-2R VIS-LOK Female Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT

















VISFEI-16-12R VIS-LOK Female Elbow 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISFEI-16-16R VIS-LOK Female Elbow 316 Stainless Steel 1" O.D Tube x 1" BSPT



FEMALE ELBOW

Code Description

Imperial NPT

VISFEI-4-2N VIS-LOK Female Elbow 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT

















VISFEI-16-12N VIS-LOK Female Elbow 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISFEI-16-16N VIS-LOK Female Elbow 316 Stainless Steel 1" O.D Tube x 1" NPT



FEMALE ELBOW

Code Description

Metric BSPT

VISFEI-6M-4R VIS-LOK Female Elbow 316 Stainless Steel 6mm O.D Tube x 1/4" BSPT






Metric NPT

VISFEI-6M-4N VIS-LOK Female Elbow 316 Stainless Steel 6mm O.D Tube x 1/4" NPT






More Metric Sizes also available



UNION TEE

Code Description

Imperial

VISUTI-4 VIS-LOK Union Tee 316 Stainless Steel 1/4" O.D Tube






VISUTI-16 VIS-LOK Union Tee 316 Stainless Steel 1" O.D Tube

Metric

VISUTI-6M VIS-LOK Union Tee 316 Stainless Steel 6mm O.D Tube












REDUCING UNION TEE

Code Description

Imperial

VISRUTI-6-4 VIS-LOK Reducing Union Tee 316 Stainless Steel 3/8" x 1/4" O.D Tube






VISRUTI-16-4 VIS-LOK Reducing Union Tee 316 Stainless Steel 1" x 1/4" O.D Tube




Metric

VISRUTI-8M-6M VIS-LOK Reducing Union Tee 316 Stainless Steel 8mm x 6mm O.D Tube











MALE BRANCH TEE

Code Description

Imperial BSPT

VISMBTI-4-2R VIS-LOK Male Branch Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT









VISMBTI-16-12R VIS-LOK Male Branch Tee 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISMBTI-16-16R VIS-LOK Male Branch Tee 316 Stainless Steel 1" O.D Tube x 1" BSPT

Imperial NPT

VISMBTI-4-2N VIS-LOK Male Branch Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT









VISMBTI-16-12N VIS-LOK Male Branch Tee 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISMBTI-16-16N VIS-LOK Male Branch Tee 316 Stainless Steel 1" O.D Tube x 1" NPT



MALE BRANCH TEE

Code Description

Metric BSPT

VISMBTI-6M-2R VIS-LOK Male Branch Tee 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT











Metric NPT

VISMBTI-6M-2N VIS-LOK Male Branch Tee 316 Stainless Steel 6mm O.D Tube x 1/8" NPT













MALE RUN TEE

Code Description

Imperial BSPT

VISMRTI-4-2R VIS-LOK Male Run Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT










Imperial NPT

VISMRTI-4-2N VIS-LOK Male Run Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT












MALE RUN TEE

Code Description

Metric BSPT

VISMRTI-6M-2R VIS-LOK Male Run Tee 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT










Metric NPT

VISMRTI-6M-2N VIS-LOK Male Run Tee 316 Stainless Steel 6mm O.D Tube x 1/8" NPT












FEMALE BRANCH TEE

Code Description

Imperial BSPT

VISFBTI-4-2R VIS-LOK Female Branch Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT









VISFBTI-16-12R VIS-LOK Female Branch Tee 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISFBTI-16-16R VIS-LOK Female Branch Tee 316 Stainless Steel 1" O.D Tube x 1" BSPT

Imperial NPT

VISFBTI-4-2N VIS-LOK Female Branch Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT









VISFBTI-16-12N VIS-LOK Female Branch Tee 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISFBTI-16-16N VIS-LOK Female Branch Tee 316 Stainless Steel 1" O.D Tube x 1" NPT



FEMALE BRANCH TEE

Code Description

Metric BSPT

VISFBTI-6M-4R VIS-LOK Female Branch Tee 316 Stainless Steel 6mm O.D Tube x 1/4" BSPT










Metric NPT

VISFBTI-6M-4N VIS-LOK Female Branch Tee 316 Stainless Steel 6mm O.D Tube x 1/4" NPT












FEMALE RUN TEE

Code Description

Imperial BSPT

VISFRTI-4-2R VIS-LOK Female Run Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT






VISFRTI-16-12R VIS-LOK Female Run Tee 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISFRTI-16-16R VIS-LOK Female Run Tee 316 Stainless Steel 1" O.D Tube x 1" BSPT

Imperial NPT

VISFRTI-4-2N VIS-LOK Female Run Tee 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT






VISFRTI-16-12N VIS-LOK Female Run Tee 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISFRTI-16-16N VIS-LOK Female Run Tee 316 Stainless Steel 1" O.D Tube x 1" NPT



FEMALE RUN TEE

Code Description

Metric BSPT

VISFRTI-6M-2R VIS-LOK Female Run Tee 316 Stainless Steel 6mm O.D Tube x 1/8" BSPT










Metric NPT

VISFRTI-6M-2N VIS-LOK Female Run Tee 316 Stainless Steel 6mm O.D Tube x 1/8" NPT












UNION CROSS

Code Description

Imperial

VISUCI-4 VIS-LOK Union Cross 316 Stainless Steel 1/4" O.D Tube






VISUCI-16 VIS-LOK Union Cross 316 Stainless Steel 1" O.D Tube

Metric

VISUCI-8M VIS-LOK Union Cross 316 Stainless Steel 8mm O.D Tube









REDUCER

Code Description

Imperial

VISRI-4-2 VIS-LOK Reducer 316 Stainless Steel 1/4" x 1/8" O.D Tube



















VISRI-8-16 VIS-LOK Reducer 316 Stainless Steel 1/2" x 1" O.D Tube





VISRI-16-20 VIS-LOK Reducer 316 Stainless Steel 1" x 1-1/4" O.D Tube

VISRI-16-24 VIS-LOK Reducer 316 Stainless Steel 1" x 1-1/2" O.D Tube

VISRI-16-32 VIS-LOK Reducer 316 Stainless Steel 1" x 2" O.D Tube



REDUCER

Code Description

Metric

VISRI-6M-2 VIS-LOK Reducer 316 Stainless Steel 6mm x 1/8" O.D Tube





VISRI-6M-8M VIS-LOK Reducer 316 Stainless Steel 6mm x 8mm O.D Tube


























REDUCER CONT.

Code Description



VISRI-18M-16 VIS-LOK Reducer 316 Stainless Steel 18mm x 1" O.D Tube












VISRI-25M-16 VIS-LOK Reducer 316 Stainless Steel 25mm x 1" O.D Tube





MALE TUBE ADAPTOR

Code Description

Imperial BSPT

VISMA-4-2R VIS-LOK Male Tube Adaptor 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT













VISMA-8-16R VIS-LOK Male Tube Adaptor 316 Stainless Steel 1/2" O.D Tube x 1” BSPT






VISMA-12-16R VIS-LOK Male Tube Adaptor 316 Stainless Steel 3/4" O.D Tube x 1” BSPT

VISMA-16-12R VIS-LOK Male Tube Adaptor 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISMA-16-16R VIS-LOK Male Tube Adaptor 316 Stainless Steel 1" O.D Tube x 1" BSPT



MALE TUBE ADAPTOR

Code Description

Imperial NPT

VISMA-4-2N VIS-LOK Male Tube Adaptor 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT













VISMA-8-16N VIS-LOK Male Tube Adaptor 316 Stainless Steel 1/2" O.D Tube x 1” NPT






VISMA-12-16N VIS-LOK Male Tube Adaptor 316 Stainless Steel 3/4" O.D Tube x 1" NPT

VISMA-16-12N VIS-LOK Male Tube Adaptor 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISMA-16-16N VIS-LOK Male Tube Adaptor 316 Stainless Steel 1" O.D Tube x 1" NPT

Metric Male Tube Adaptor also available



FEMALE TUBE ADAPTOR

Code Description

Imperial BSPT

VISFA-4-2R VIS-LOK Female Tube Adaptor 316 Stainless Steel 1/4" O.D Tube x 1/8" BSPT


















VISFA-12-16R VIS-LOK Female Tube Adaptor 316 Stainless Steel 3/4" O.D Tube x 1" BSPT

VISFA-16-12R VIS-LOK Female Tube Adaptor 316 Stainless Steel 1" O.D Tube x 3/4" BSPT

VISFA-16-16R VIS-LOK Female Tube Adaptor 316 Stainless Steel 1" O.D Tube x 1" BSPT



FEMALE TUBE ADAPTOR

Code Description

Imperial NPT

VISFA-4-2N VIS-LOK Female Tube Adaptor 316 Stainless Steel 1/4" O.D Tube x 1/8" NPT


















VISFA-12-16N VIS-LOK Female Tube Adaptor 316 Stainless Steel 3/4" O.D Tube x 1" NPT

VISFA-16-12N VIS-LOK Female Tube Adaptor 316 Stainless Steel 1" O.D Tube x 3/4" NPT

VISFA-16-16N VIS-LOK Female Tube Adaptor 316 Stainless Steel 1" O.D Tube x 1" NPT

Metric Female Tube Adaptor also available



AN UNION

Code Description

Imperial

VISAUI-4-4U VIS-LOK Union 316 Stainless Steel 1/4" O.D Tube x 1/4" AN Tube Flare







VISAUI-16-16U VIS-LOK Union 316 Stainless Steel 1" O.D Tube x 1" AN Tube Flare

Metric AN Unions also available

AN TUBE ADAPTOR

Code Description

Imperial

VISAA-4-4U VIS-LOK AN Tube Adaptor 316 Stainless Steel 1/4" O.D Tube x 1/4" AN Tube Flare




VISAA-16-16U VIS-LOK AN Tube Adaptor 316 Stainless Steel 1" O.D Tube x 1" AN Tube Flare

MALE O-SEAL STRAIGHT THREAD CONNECTOR

Code Description

Imperial

VISOSCI-4-4U VIS-LOK Male O-Seal Connector 316 Stainless Steel 1/4" O.D Tube x 7/16-20 Male O-Seal SAE/MS Straight Thread




VISOSCI-12-12U VIS-LOK Male O-Seal Connector 316 Stainless Steel 3/4" O.D Tube x 1-1/16-12 Male O-Seal SAE/MS Straight Thread

VISOSCI-16-16U VIS-LOK Male O-Seal Connector 316 Stainless Steel 1" O.D Tube x 1-5/16-12 Male O-Seal SAE/MS Straight Thread



MALE O-SEAL PIPE THREAD CONNECTOR

Code Description

Imperial NPT

VISOPCI-4-2N VIS-LOK Male O-Seal Connector 316 Stainless Steel 1/4" O.D Tube x 1/8" Male O-Seal NPT






SAE/MS MALE CONNECTOR

Code Description

Imperial BSP

VISSMCI-4-4U VIS-LOK Male Connector 316 Stainless Steel 1/4" O.D Tube x 7/16-20 Male SAE/MS Straight Thread












VISSMCI-8-12U VIS-LOK Male Connector 316 Stainless Steel 1/2" O.D Tube x 1-1/16-12 Male SAE/MS Straight Thread




VISSMCI-12-12U VIS-LOK Male Connector 316 Stainless Steel 3/4" O.D Tube x 1-1/16-12 Male SAE/MS Straight Thread

VISSMCI-16-12U VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1-1/16-12 Male SAE/MS Straight Thread

VISSMCI-16-16U VIS-LOK Male Connector 316 Stainless Steel 1" O.D Tube x 1-5/16-12 Male SAE/MS Straight Thread



Mounting Dimensions for O-Seal Connectors

*ALLOW CLEARANCE FOR FULL THREAD

Installation InstructionIn order to prevent the leakage with VIS-LOK O-Seal Fittings, the surface perpendicular to the axis of the thread should be flat.When installing an O-Seal fitting, turn it until finger-tight.(The squeeze on O-Ring can be felt during the last 1/4 turn). After finger-tight installation, snug lightly with a wrench.When connecting the tubing to the VIS-LOK connector, always use a back-up wrench on the O-Seal fitting hex so it does not turn while the nut is being tightened. Also use a back-up wrench when disconnectiong a tubing connection.For a raised surface, such as Figure 1, it is recommended that the flat surface have a diameter at least as large as dimension “A” for the various size O-Seal fittings. This diameter is sufficient to allow metal-to-metal contact outside of the O-Ring sealing diameter and to prevent O-Ring extrusion at high pressure.Figure 2 is an O-Seal fitting using with a counter bored or recessed hole. In this case, the diameter “B” is sufficient to allow the round shoulder of the O-seal to clear for proper installation. “D” gives the maximum depth that can be used with this diameter.Figure 3 shows the usage at deeper grooved or concaved area and “E” is the maximum depth that will allow a thin wrench (1/8”) to hold the O-Seal fitting while the VIS-LOK connection is made to the tubing. The diameter “C” is sufficient to allow the hex of the fitting to turn in the recessed hole.

Basic OrderingNumber

Straight Thread

Pipe Thread

AMin. Dia.

BMin. Dia.

CMin. Dia.

DMin. Dia.

E Min. Dia.

VISOSCI-4-4U 7/16-20 - 17.5 19.8 22.4 4.1 7.1

VISOPCI-4-2N - 1/8 NPT 17.5 19.8 22.4 4.1 7.1

VISOPCI-4-4N - 1/4 NPT 22.1 24.6 27.7 4.1 7.9

VISOSCI-5-5U 1/2-20 - 19.1 23.1 26.2 4.1 7.9

VISOSCI-6-6U 9/16-18 - 20.6 24.6 27.7 4.1 7.9

VISOPCI-6-4N - 1/4 NPT 22.1 24.6 27.7 4.1 7.9

VISOPCI-6-6N - 3/8 NPT 25.4 29.5 33.3 4.1 8.6

VISOPCI-6-8N - 1/2 NPT 31.0 34.0 38.9 5.6 11.2

VISOSCI-8-8U 3/4-16 - 25.4 29.5 33.3 4.1 8.6

VISOPCI-8-8N - 1/2 NPT 31.0 34.0 38.9 5.6 11.2

VISOSCI-12-12U 1-1/16-12 - 35.8 38.9 44.5 5.6 12.7

VISOSCI-16-16U 1-5/16-12 - 42.9 45.2 51.6 5.6 14.2



PLUG

Code Description

Imperial

VISP-4 VIS-LOK Plug 316 Stainless Steel 1/4" O.D Tube






VISP-16 VIS-LOK Plug 316 Stainless Steel 1" O.D Tube

Metric Plugs Available

CAP

Code Description

Imperial

VISCI-4 VIS-LOK Cap 316 Stainless Steel 1/4" O.D Tube






VISCI-16 VIS-LOK Cap 316 Stainless Steel 1" O.D Tube

Metric

VISCI-6M VIS-LOK Cap 316 Stainless Steel 6mm O.D Tube












ANSI 150 FLANGE ADAPTOR

Code Description

Imperial

VISFLAI-8-8A VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 1/2" O.D Tube x 1/2" Class 150

VISFLAI-12-12A VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 3/4" O.D Tube x 3/4" Class 150

VISFLAI-16-16A VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 1" O.D Tube x 1" Class 150

ANSI 300 FLANGE ADAPTOR

Code Description

Imperial

VISFLAI-8-8B VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 1/2" O.D Tube x 1/2" Class 300

VISFLAI-12-12B VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 3/4" O.D Tube x 3/4" Class 300

VISFLAI-16-16B VIS-LOK ANSI Flange Adaptor 316 Stainless Steel 1" O.D Tube x 1" Class 300



NUT

Code Description

Imperial

VISIN-4 VIS-LOK Nut 316 Stainless Steel 1/4" O.D Tube






VISIN-16 VIS-LOK Nut 316 Stainless Steel 1" O.D Tube

Metric

VISIN-6M VIS-LOK Nut 316 Stainless Steel 6mm O.D Tube












FERRULE SET

Code Description

Imperial

VISFS-4 VIS-LOK Ferrule Set 316 Stainless Steel 1/4" O.D Tube






VISFS-16 VIS-LOK Ferrule Set 316 Stainless Steel 1" O.D Tube

Metric

VISFS-6M VIS-LOK Ferrule Set 316 Stainless Steel 6mm O.D Tube










Stick of 10 sets shown. Sets also sold separately.



FRONT FERRULE

Code Description

Imperial

VISFF-4 VIS-LOK Front Ferrule 316 Stainless Steel 1/4" O.D Tube






VISFF-16 VIS-LOK Front Ferrule 316 Stainless Steel 1" O.D Tube

Metric

VISFF-6M VIS-LOK Front Ferrule 316 Stainless Steel 6mm O.D Tube












BACK FERRULE

Code Description

Imperial

VISBF-4 VIS-LOK Back Ferrule 316 Stainless Steel 1/4" O.D Tube






VISBF-16 VIS-LOK Back Ferrule 316 Stainless Steel 1" O.D Tube

Metric

VISBF-6M VIS-LOK Back Ferrule 316 Stainless Steel 6mm O.D Tube












BONDED WASHER SEAL

Code Description

VISIBGI-4-01 VIS-LOK Bonded Washer Seal 1/4" SS316 & NBR




VISIBGI-16-01 VIS-LOK Bonded Washer Seal 1" SS316 & NBR

Other Combinations also available

COPPER GASKET

Code Description

VISIPGI-4-CU VIS-LOK ISO Parallel Copper Gasket 1/4"




VISIPGI-16-CU VIS-LOK ISO Parallel Copper Gasket 1"



BALL VALVE

Code Description

Imperial

VISBVI210-S4 VIS-LOK Ball Valve (1000PSI) 316 Stainless Steel 1/4" O.D Tube






VISBVI210-S16 VIS-LOK Ball Valve (1000PSI) 316 Stainless Steel 1" O.D Tube

Metric

VISBVI210-S6M VIS-LOK Ball Valve (1000PSI) 316 Stainless Steel 6mm O.D Tube










For full range please contact us

LOCKABLE BALL VALVE

Code Description

Imperial

VISBVLI210-S4 VIS-LOK Key Operation Lockable Ball Valve (1000PSI) 316 Stainless Steel 1/4" O.D Tube




VISBVLI210-S16 VIS-LOK Key Operation Lockable Ball Valve (1000PSI) 316 Stainless Steel 1" O.D Tube

Metric Lockable Ball Valves also available



3000PSI THREADED BALL VALVES

Code Description

BSPT

SSHPIBV43R High Pressure Ball Valve (3000PSI) 316 Stainless Steel 1/4" BSPT




SSHPIBV163R High Pressure Ball Valve (3000PSI) 316 Stainless Steel 1" BSPT

NPT

SSHPIBV43N High Pressure Ball Valve (3000PSI) 316 Stainless Steel 1/4" NPT




SSHPIBV163N High Pressure Ball Valve (3000PSI) 316 Stainless Steel 1" NPT

6000PSI THREADED BALL VALVES

Code Description

BSPT





SSHPIBV166R High Pressure Ball Valve (6000PSI) 316 Stainless Steel 1" BSPT

NPT





SSHPIBV166N High Pressure Ball Valve (6000PSI) 316 Stainless Steel 1" NPT



One Piece Type Two Piece Type (See P63) Three Piece High Pressure Type

Key Operation Ball Valves (See P63) Trunnion Ball Valves Swing-out Ball Valves

Forged High Pressure Ball Valves

Integral Bonnet Needle Valves Union Bonnet Needle Valves Integral Bonnet Bar Stock Needle Valves

Plug Valves Toggle Valves Relief Valves

Range of valves available to suit all pressures, temperatures and applications.For more technical information, please call 0800 387 677

OTHER VALVES

NEEDLE VALVES

INSTRUMENTATION BALL VALVES



CHECK VALVES

Code Description

Imperial

VISPCVI-S4-10P VIS-LOK Check Valve 316 Stainless Steel 1/4" O.D Tube





VISPCVI-S16-10P VIS-LOK Check Valve 316 Stainless Steel 1" O.D Tube

Metric

VISPCVI-S-6M-10P VIS-LOK Check Valve 316 Stainless Steel 6mm O.D Tube










Various O-rings available: Viton (Fluorocarbon) (Standard), Buna N, Ethylene Propylene, Kalrez and Noeprene.

Various Cracking Pressures Available: 1/3psi, 1psi, 10psi, 25psi, 50psi, 100psi. Custom settings also available.

Other options, Check Valves & Industrial Excess Flow Valves also available.


1/8” Stainless Steel Compression Fittings

UNION

Code Description

Imperial

ISU-2 Union 316 Stainless Steel 1/8" O.D Tube

MALE CONNECTOR

Code Description

Imperial

ISMC-2-2R Male Connector 316 Stainless Steel 1/8" O.D Tube x 1/8" BSPT

MALE ELBOW

Code Description

Imperial

ISME-2-2R Male Elbow 316 Stainless Steel 1/8" O.D Tube x 1/8" BSPT

UNION TEE

Code Description

Imperial

ISUT-2 Union Tee 316 Stainless Steel 1/8" O.D Tube

UNION ELBOW

Code Description

Imperial

ISUE-2 Union Elbow 316 Stainless Steel 1/8" O.D Tube



UNION

Code Description

Imperial

ISU-20 Union 316 Stainless Steel 1-1/4" O.D Tube

ISU-24 Union 316 Stainless Steel 1-1/2" O.D Tube

ISU-32 Union 316 Stainless Steel 2" O.D Tube

UNION ELBOW

Code Description

Imperial

ISUE-20 Union Elbow 90 F/F 316 Stainless Steel 1-1/4" O.D Tube

ISUE-24 Union Elbow 90 F/F 316 Stainless Steel 1-1/2" O.D Tube

ISUE-32 Union Elbow 90 F/F 316 Stainless Steel 2" O.D Tube

MALE CONNECTOR

Code Description

Imperial BSPT

ISMC-20-20R Male Connector 316 Stainless Steel 1-1/4" O.D Tube x 1-1/4" BSPT

ISMC-24-24R Male Connector 316 Stainless Steel 1-1/2" O.D Tube x 1-1/2" BSPT

ISMC-32-32R Male Connector 316 Stainless Steel 2" O.D Tube x 2" BSPT

Imperial NPT

ISMC-20-20N Male Connector 316 Stainless Steel 1-1/4" O.D Tube x 1-1/4" NPT

ISMC-24-24N Male Connector 316 Stainless Steel 1-1/2" O.D Tube x 1-1/2" NPT

ISMC-32-32N Male Connector 316 Stainless Steel 2" O.D Tube x 2" NPT

UNION TEE

Code Description

Imperial

ISUT-20 Union Tee 316 Stainless Steel 1-1/4" O.D Tube

ISUT-24 Union Tee 316 Stainless Steel 1-1/2" O.D Tube

ISUT-32 Union Tee 316 Stainless Steel 2" O.D Tube


1-1/4”, 1-1/2” & 2” Stainless Steel Compression Fittings


HEX NIPPLE

Code Description

NPT

SSIHN-4N Stainless Steel 316 Threaded Instrumentation Hex Nipple 1/4" NPT




SSIHN-16N Stainless Steel 316 Threaded Instrumentation Hex Nipple 1" NPT

BSPT

SSIHN-4R Stainless Steel 316 Threaded Instrumentation Hex Nipple 1/4" BSPT




SSIHN-16R Stainless Steel 316 Threaded Instrumentation Hex Nipple 1" BSPT

HEX COUPLING

Code Description

NPT

SSIHC-4N Stainless Steel 316 Threaded Instrumentation Hex Coupling 1/4" NPT




SSIHC-16N Stainless Steel 316 Threaded Instrumentation Hex Coupling 1" NPT

BSPT

SSIHC-4R Stainless Steel 316 Threaded Instrumentation Hex Coupling 1/4" BSPT




SSIHC-16R Stainless Steel 316 Threaded Instrumentation Hex Coupling 1" BSPT



FEMALE ELBOW

Code Description

NPT

SSIFE-4N Stainless Steel 316 Threaded Instrumentation Female Elbow 1/4" NPT




SSIFE-16N Stainless Steel 316 Threaded Instrumentation Female Elbow 1" NPT

BSPT

SSIFE-4R Stainless Steel 316 Threaded Instrumentation Female Elbow 1/4" BSPT




SSIFE-16R Stainless Steel 316 Threaded Instrumentation Female Elbow 1" BSPT

FEMALE/MALE ELBOW

Code Description

NPT

SSISE-4N Stainless Steel 316 Threaded Instrumentation Female/Male Elbow 1/4" NPT




SSISE-16N Stainless Steel 316 Threaded Instrumentation Female/Male Elbow 1" NPT



FEMALE/MALE ELBOW

Code Description

BSPT

SSISE-4R Stainless Steel 316 Threaded Instrumentation Female/Male Elbow 1/4" BSPT




SSISE-16R Stainless Steel 316 Threaded Instrumentation Female/Male Elbow 1" BSPT

FEMALE EQUAL TEE

Code Description

NPT

SSIFT-4N Stainless Steel 316 Threaded Instrumentation Female Equal Tee 1/4" NPT




SSIFT-16N Stainless Steel 316 Threaded Instrumentation Female Equal Tee 1" NPT

BSPT

SSIFT-4R Stainless Steel 316 Threaded Instrumentation Female Equal Tee 1/4" BSPT




SSIFT-16R Stainless Steel 316 Threaded Instrumentation Female Equal Tee 1" BSPT



REDUCING HEX NIPPLE

Code Description

NPT

SSIHRN-4N-2N Stainless Steel 316 Threaded Instrumentation Reducing Hex Nipple 1/4" x 1/8" NPT









SSIHRN-16N-4N Stainless Steel 316 Threaded Instrumentation Reducing Hex Nipple 1" x 1/4" NPT




BSPT

SSIHRN-4R-2R Stainless Steel 316 Threaded Instrumentation Reducing Hex Nipple 1/4" x 1/8" BSPT









SSIHRN-16R-4R Stainless Steel 316 Threaded Instrumentation Reducing Hex Nipple 1" x 1/4" BSPT






REDUCING BUSH

Code Description

NPT

SSIRHB-4N-2N Stainless Steel 316 Threaded Instrumentation Reducing Bush 1/4" x 1/8" NPT









SSIRHB-16N-4N Stainless Steel 316 Threaded Instrumentation Reducing Bush 1" x 1/4" NPT




BSPT

SSIRHB-4R-2R Stainless Steel 316 Threaded Instrumentation Reducing Bush 1/4" x 1/8" BSPT









SSIRHB-16R-4R Stainless Steel 316 Threaded Instrumentation Reducing Bush 1" x 1/4" BSPT







PLUG

Code Description

NPT

SSIPP-4N Stainless Steel 316 Threaded Instrumentation Plug 1/4" NPT




SSIPP-16N Stainless Steel 316 Threaded Instrumentation Plug 1" NPT

BSPT

SSIPP-4R Stainless Steel 316 Threaded Instrumentation Plug 1/4" BSPT




SSIPP-16R Stainless Steel 316 Threaded Instrumentation Plug 1" BSPT


Size

316 Stainless Steel

Male Female

psig bar psig bar

1/8” 10000 689 6500 447

1/4” 8000 551 6600 454

3/8” 7800 537 5300 365

1/2” 7700 530 4900 337

3/4” 7300 502 4600 316

1” 5300 365 4400 303

• Pressure ratings are based on ASME Code for Pressure Piping B31.3, Process Piping with allowable stress 20,000psi for SS316.

• To determine pressure ratings in accordance with B31.1, Power Piping: multiply by 0.94 for 316 Stainless steel.

PRESSURE RATINGS


IMPERIAL TUBE MATT FINISH

Code Description

SST1/4SMF35 Seamless SS316/316L Tube Annealed & Pickled Matt/Mill Finish, 1/4" (0.035WT)














SST1SMF65 Seamless SS316/316L Tube Annealed & Pickled Matt/Mill Finish, 1" (0.065WT)

SST1SMF83 Seamless SS316/316L Tube Annealed & Pickled Matt/Mill Finish, 1" (0.083WT)

METRIC TUBE MATT FINISH

Code Description

SST6SMF10 Seamless SS316/316L Tube Annealed & Pickled Matt/Mill Finish, 6mm (1mm WT)


SST8SMF15 Seamless SS316/316L Tube Annealed & Pickled Matt/Mill Finish, 8mm (1.5mm WT)















Selected sizes stocked in NZ

Stainless Steel Seamless Tube


IMPERIAL TUBE BRIGHT FINISH

Code Description

SST1/4SBF35 Seamless SS316/316L Tube Bright Finish, 1/4" (0.035WT)














SST1SBF65 Seamless SS316/316L Tube Bright Finish, 1" (0.065WT)

SST1SBF83 Seamless SS316/316L Tube Bright Finish, 1" (0.083WT)

METRIC TUBE BRIGHT FINISH

Code Description

SST6SBF10 Seamless SS316/316L Tube Bright Finish, 6mm (1mm WT)


SST8SBF15 Seamless SS316/316L Tube Bright Finish, 8mm (1.5mm WT)















Selected sizes stocked in NZ

Stainless Steel Seamless Tube


HEAVY DUTY TUBE BENDERS

Code Description

HDSSTB1/4 Heavy Duty 180° Lever Tube Bender with Roto-Lok for 1/4" O.D. Annealed Tube (Max WT 0.083"/2.1mm)



REAMER/DEBURRERS

Code Description

UTR015054 Windsor Multi Reamer 15-54mm, Range 10-56mm

UMRSP1554 Windsor Multi Reamer 15-54mm, Range 10-56mm, c/w Spindle

TUBE CUTTERS

Code Description

UTF015035 Windsor Cu/Al/SS Rotary Pipe Cutter 15-35mm

UTP015076 Windsor SS Rotary Pipe Cutter with Bearing 15-76mm

UTG015035 Windsor Replacement Cutting Wheel to suit UTF015035 Cu/Al/SS Pipe

UTG015076 Windsor Replacement Cutting Wheel to suit UTF015076 Cu/Al/SS Pipe

UTQ015076 Windsor Replacement Cutting Wheel with Bearing to suit UTP015076 Cu/Al/SS Pipe

HEAVY DUTY RATCHET TUBE WRENCHES

Code Description

HDRW1/4 Heavy Duty Ratchet Tube Wrench for 1/4" VIS-LOK Compression Fittings



Tube Tooling


TUBE CLAMPS

Code Description

SHPC-4 Hydraulic Tube Clamp 1/4" (6.35mm)




SHPC-16 Hydraulic Tube Clamp 1" (25.40mm)

STAINLESS STEEL 316 TUBE CLAMPS

Code Description

SHPC-4SS Hydraulic Tube Clamp 1/4" (6.35mm) 316SS Hardware




SHPC-16SS Hydraulic Tube Clamp 1" (25.40mm) 316SS Hardware

Clips and Tube Supports


STAINLESS STEEL 316 SINGLE PIECE CLIP HEAD

Code Description

UTBSS VIS-LOK Tee Bracket Stainless Steel

SSSPCH1/4 Stainless Steel 316 Single Piece Clip Head 1/4" (6.35mm)




SSSPCH1 Stainless Steel 316 Single Piece Clip Head 1" (25.40mm)

STAINLESS STEEL 316 NUT CLIP

Code Description

SSCL-4 Stainless Steel 316 Nut Clip M10, 1/4"




SSCL-16 Stainless Steel 316 Nut Clip M10, 1"

ZINC PLATED CLIP

Code Description

SCL-4 Zinc Plated Clip 1/4" M10 Rubber Lined




SCL-16 Zinc Plated Clip 1" M10 Rubber Lined

Clips and Tube Supports

Disclaimer

Whilst due care and revision has been taken in preparation of this Manual, Waterworks takes no liability for accuracy of information contained herein.

As part of a process of continual improvement, Waterworks reserves the right to upgrade or modify components from this description in this manual at any time without notice.

No part may be reproduced in any way without written permission from Waterworks.

All sales are subject to the company’s Terms and Conditions of Sale. E & OE.

Knowledge, experience and innovation is the foundation of the Waterworks team, with more than 125 years combined industry expertise.

Graeme Thomas started providing precision engineering services for local processing plants in 1980. He formed a reputation for reliability and was known for finding a working solution to any issue. A decade later, with sons Gary and Daniel having joined the force, they were now also supplying and installing pump and pipeline solutions.

In 2005 Waterworks Wholesale emerged, importing and distributing agricultural piping systems nationwide. The range grew over time with the popular addition of industrial systems such as Europress press-fit and Spears sch80 PVC. Today Waterworks includes three generations and combines experience from 38 years in the game with modern and innovative processes. As a family company, we bring an extra level of passion to everything we do. We not only supply reliable piping systems, but we also provide you with a greater experience designed to increase your productivity.

We know what works and what doesn’t.

90 Hurlstone Drive, New Plymouthp: +64 6 769 6373 f: +64 6 769 6755

e: [email protected]

www.waterworksnz.co.nz

Date post:	28-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Certification - Waterworks Wholesale...Stainless Steel Compression Fittings Allowable stress value...

Documents