CHAIN WEAR INDICATOR
BS set (art. no. 2017031680)- Chain Wear Indicator for sizes RF06B to RS16B- Chain Identifier for BS & ANSI chain- Instructions on how to use
ANSI set (art. no. 2017031681)- Chain Wear Indicator for sizes RS35 to RS80- Chain Identifier for BS & ANSI chain- Instructions on how to use
SET CONTENT
Tsubaki Recommendation:
• UsetheChainWearIndicatoraccordingtoyourregularmaintenancescheduleofthemachineor
productionline.
• Alwaysmeasureonseveralpoints-donotbesatisfiedwithonemeasurement,sincethechainmight
wearunevenly.
• Regularlycheckingthechainforwearallowsforbettermanagementofmaintenanceschedulingand
eliminatestheriskofchainbreakage.
•Replacingchainsbeforereaching1,5%elongationwillpreventsignificantsprocketwear,thus
avertingcostlydowntime.
TheTsubakiChainWearIndicatorisdesignedtomeasurerollerchainconditionanddeterminecriticalwear.Thegaugesaremadeofqualitymaterialandareresistanttocorrosion.Theirrobustconstructionensuresaccuratemeasuringeverytime.
TSUBAKI CHAINWEARINDICATOR
RS10B
RS10B
TSUBAKI CHAIN WEAR INDICATOR
Mounting part,to put on a roller
Gauge body, holding part
Indication part, measuring area
1,5% Elongation limit is reached, replace chain a.s.a.p.
GREEN: 0,7% Elongation, chain is OK
RED:
1,5% Elongation
TSUBAKI CHAIN WEAR INDICATOR
NEW CHAIN
0% Elongation
WORN CHAIN
0,7% Elongation
Start planning chain replacement
Replace chain a.s.a.p.Sprocket wear starts
MEASUREWEAR
Pleasevisitourwebsiteformoreinformation:
tsubaki.eu
