Chapter 73 | HTS

CHAPTER 73

ARTICLES OF IRON OR STEELXV

73-1Notes

1. In this chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over eachof the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to chapter 72.

2. In this chapter the word "wire" means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectionaldimension exceeds 16 mm.

Additional U.S. Notes

1. For the purposes of heading 7304 or 7306, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubesand pipes with attached fittings, suitable for conducting gases or liquids.

2. For the purposes of subheading 7307.19.30, the expression "ductile fittings" refers to fittings which contain over 2.5 percentcarbon and over 0.02 percent of magnesium or of magnesium and cerium, by weight.

Statistical Note

1. For the purposes of statistical reporting numbers 7310.10.0005, 7310.29.0020 and 7310.29.0055, “refillable stainless steel kegs,whether or not pressurized” refers to cylindrical kegs for liquid beverages, each keg with a domed top and bottom and a singleneck piece, designed for a coupler (valve) system and an extractor tube (spear) by which the keg can be cleaned, filled anddispense the liquid contents.

Compiler's Note

The provisions of subchapter II of chapter 99 (Miscellaneous Tariff Bills or MTBs), the provisions of the Generalized System of Preferences (GSP)found in General Note 4 and most product exclusions from the additional tariffs on products of China in subchapter III of chapter 99 expired onDecember 31, 2020. However, no endnotes or footnotes relating to these provisions have been deleted as of the issue date of this edition.

Harmonized Tariff Schedule of the United States Revision 2 (2022)Annotated for Statistical Reporting Purposes

Rates of DutyUnitof

QuantityArticle Description

Stat.Suf-fix

Heading/Subheading 21

SpecialGeneral

Sheet piling of iron or steel, whether or not drilled, punched ormade from assembled elements; welded angles, shapes andsections, of iron or steel:

7301

Sheet piling.............................................................................007301.10.00 2%Free1/2/kg..............

Angles, shapes and sections:7301.20Of iron or nonalloy steel..................................................007301.20.10 20%Free3/kg..............

Of alloy steel....................................................................007301.20.50 28%Free3/kg..............

Railway or tramway track constructionmaterial of iron or steel,the following: rails, check-rails and rack rails, switch blades,crossing frogs, point rods and other crossing pieces, sleepers(cross-ties), fish-plates, chairs, chair wedges, sole plates (baseplates), rail clips, bedplates, ties and other material specializedfor jointing or fixing rails:

7302

Rails:7302.10Of iron or nonalloy steel..................................................7302.10.10 1%Free1/2/..................

New:Not heat treated:

Standard tee rails over 30 kg per meter....10 kgOther:

Over 30 kg per meter...........................15 kgOther......................................................25 kg

Heat treated:Standard tee rails over 30 kg per meter....35 kgOther:

Over 30 kg per meter...........................45 kgOther......................................................55 kg

Used:Railway rails for rerolling...................................65 kgOther...................................................................75 kg

Of alloy steel....................................................................7302.10.50 9%Free1/2/..................New............................................................................20 kgUsed:

Railway rails for rerolling...................................40 kgOther...................................................................60 kg

Switch blades, crossing frogs, point rods and othercrossing pieces.......................................................................

007302.30.0045%Free3/kg..............

Fish-plates and sole plates...................................................007302.40.00 2%Free4/2/kg..............

Other:7302.90Sleepers (cross-ties).......................................................007302.90.10 2%Free1/2/kg..............

Other.................................................................................007302.90.90 45%Free1/2/kg..............

Tubes, pipes and hollow profiles, of cast iron...........................7303.00.00 33%Free3/..................Soil pipe...................................................................................30 kgPressure pipe with an inside diameter of less than356 mm...................................................................................

60kg

Other........................................................................................90 kg

Rates of Duty1


XV73-2

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Tubes, pipes and hollow profiles, seamless, of iron (other thancast iron) or steel:

7304

Line pipe of a kind used for oil or gas pipelines:Of stainless steel.............................................................7304.11.00 35%Free1/2/..................

Having an outside diameter not exceeding114.3 mm...................................................................

20kg

Having an outside diameter exceeding 114.3 mmbut not exceeding 406.4 mm...................................

50kg

Having an outside diameter exceeding406.4 mm...................................................................

80kg

Other:7304.19Of iron or nonalloy steel...........................................7304.19.10 25%Free1/2/..................

Having an outside diameter not exceeding114.3 mm............................................................

20kg

Having an outside diameter exceeding114.3 mm but less than 215.9 mm..................

30kg

Having an outside diameter of 215.9 mm ormore but not exceeding 406.4 mm:

Having a wall thickness less than12.7 mm.......................................................

45kg

Having a wall thickness of 12.7 mm ormore..............................................................

60kg

Having an outside diameter exceeding406.4 mm............................................................

80kg

Of other alloy steel....................................................7304.19.50 35%Free1/2/..................Having an outside diameter not exceeding114.3 mm............................................................

20kg

Having an outside diameter exceeding114.3 mm but not exceeding 406.4 mm..........

50kg


80kg

Rates of Duty1


XV73-3

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Tubes, pipes and hollow profiles, seamless, of iron (other thancast iron) or steel: (con.)

7304 (con.)

Casing, tubing and drill pipe, of a kind used in drilling foroil or gas:

Drill pipe of stainless steel..............................................7304.22.00 35%Free1/2/..................Having an outside diameter not exceeding168.3 mm:

Having a wall thickness not exceeding9.5 mm................................................................

30kg

Having a wall thickness exceeding 9.5 mm.....45 kgHaving an outside diameter exceeding168.3 mm...................................................................

60kg

Other drill pipe:7304.23Of iron or nonalloy steel...........................................007304.23.30 25%Free4/2/kg..............

Of alloy steel..............................................................7304.23.60 35%Free1/2/..................Having an outside diameter not exceeding168.3 mm:

Having a wall thickness not exceeding9.5 mm..........................................................

30kg

Having a wall thickness exceeding9.5 mm..........................................................

45kg


60kg

Other, of stainless steel:7304.24Casing:

Threaded or coupled.........................................7304.24.30 28%Free1/2/..................Having an outside diameter less than215.9 mm:

Having a wall thickness less than12.7 mm.................................................

10kg

Having a wall thickness of 12.7 mm ormore.......................................................

20kg

Having an outside diameter of 215.9 mmor more but not exceeding 285.8 mm:


30kg


40kg

Having an outside diameter exceeding285.8 mm but not exceeding 406.4 mm....

45kg

Having an outside diameter exceeding406.4 mm.....................................................

80kg

Rates of Duty1


XV73-4

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Casing, tubing and drill pipe, of a kind used in drilling foroil or gas: (con.)

Other, of stainless steel: (con.)7304.24(con.)

Casing: (con.)Other...................................................................7304.24.40 8.5%Free1/2/..................

Having an outside diameter less than215.9 mm:


10kg


20kg



30kg


40kg

Having an outside diameter exceeding285.8 mm but not exceeding 406.4 mm:


50kg


60kg


80kg

Tubing........................................................................7304.24.60 35%Free1/2/..................Having an outside diameter not exceeding114.3 mm:

Having a wall thickness not exceeding9.5 mm..........................................................

15kg

Having a wall thickness exceeding9.5 mm..........................................................

30kg

Having an outside diameter exceeding114.3 mm but less than 215.9 mm..................

45kg

Having an outside diameter of 215.9 mm ormore but not exceeding 406.4 mm..................

60kg


75kg

Rates of Duty1


XV73-5

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)


Other:7304.29Casing:

Of iron or nonalloy steel:Threaded or coupled..................................7304.29.10 20%Free1/2/..................

Having an outside diameter less than215.9 mm:

Having a wall thickness less than12.7 mm..........................................

10kg

Having a wall thickness of12.7 mm or more...........................

20kg

Having an outside diameter of215.9 mm or more but not exceeding285.8 mm:


30kg


40kg

Having an outside diameter exceeding285.8 mm but not exceeding406.4 mm:


50kg


60kg

Having an outside diameter exceeding406.4 mm..............................................

80kg

Other.............................................................7304.29.20 1%Free1/2/..................Having an outside diameter less than215.9 mm:


10kg


20kg



30kg


40kg



50kg


60kg


80kg

Rates of Duty1


XV73-6

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)


Other: (con.)7304.29(con.)

Casing: (con.)Of other alloy steel:

Threaded or coupled..................................7304.29.31 28%Free1/2/..................Having an outside diameter less than215.9 mm:


10kg


20kg



30kg


40kg



50kg


60kg


80kg

Other.............................................................7304.29.41 8.5%Free1/2/..................Having an outside diameter less than215.9 mm:


10kg


20kg



30kg


40kg



50kg


60kg


80kg

Rates of Duty1


XV73-7

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)


Other: (con.)7304.29(con.)

Tubing:Of iron or nonalloy steel....................................7304.29.50 25%Free1/2/..................

Having an outside diameter not exceeding114.3 mm:

Having awall thickness not exceeding9.5 mm...................................................

15kg

Having a wall thickness exceeding9.5 mm...................................................

30kg

Having an outside diameter exceeding114.3 mm but less than 215.9 mm............

45kg

Having an outside diameter of 215.9 mmor more but not exceeding 406.4 mm.......

60kg


75kg

Of other alloy steel.............................................7304.29.61 35%Free1/2/..................Having an outside diameter not exceeding114.3 mm:

Having awall thickness not exceeding9.5 mm...................................................

15kg

Having a wall thickness exceeding9.5 mm...................................................

30kg

Having an outside diameter exceeding114.3 mm but less than 215.9 mm............

45kg

Having an outside diameter of 215.9 mmor more but not exceeding 406.4 mm.......

60kg


75kg

Rates of Duty1


XV73-8

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other, of circular cross section, of iron or nonalloy steel:Cold-drawn or cold-rolled (cold-reduced):7304.31

Hollow bars................................................................007304.31.30 22%Free1/2/kg..............

Other..........................................................................7304.31.60 25%Free1/2/..................Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnacesand feedwater heaters......................................

10

kgOther...................................................................50 kg

Other.................................................................................7304.39.00 25%Free1/2/..................Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnaces andfeedwater heaters:

Having an outside diameter less than38.1 mm..............................................................

02kg

Having an outside diameter of 38.1 mm ormore but less than 190.5 mm...........................

04kg

Having an outside diameter of 190.5 mm ormore but not exceeding 285.8 mm..................

06kg


08kg

Rates of Duty1


XV73-9

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other, of circular cross section, of iron or nonalloy steel:(con.)

Other (con.)7304.39.00(con.)

Other:Galvanized, having an outside diameter notexceeding 114.3 mm.........................................

16kg

Other:Having an outside diameter less than38.1 mm.......................................................

20kg

Having an outside diameter of 38.1 mm ormore but not exceeding 114.3 mm:

Having a wall thickness less than6.4 mm...................................................

24kg

Having a wall thickness of 6.4 mm ormore but not exceeding 12.7 mm.......

28kg

Having a wall thickness exceeding12.7 mm.................................................

32kg

Having an outside diameter exceeding114.3 mm but less than 190.5 mm:


36kg

Having a wall thickness of 12.7 mm ormore but less than 19 mm...................

40kg

Having a wall thickness of 19 mm ormore.......................................................

44kg



48kg


52kg


56kg

Having an outside diameter exceeding285.8 mm but not exceeding 406.4 mm:


62kg


68kg


72kg

Having an outside diameter exceeding406.4 mm:

Having a wall thickness less than19 mm....................................................

76kg


80kg

Rates of Duty1


XV73-10

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other, of circular cross section, of stainless steel:Cold-drawn or cold-rolled (cold-reduced):7304.41

Of an external diameter of less than 19 mm..........7304.41.30 36%Free1/2/..................Of high-nickel alloy steel...................................05 kgOther:

Suitable for use in boilers, superheaters,heat exchangers, condensers, refiningfurnaces and feedwater heaters................

15

kgOther.............................................................45 kg

Other..........................................................................7304.41.60 36%Free1/2/..................Of high-nickel alloy steel...................................05 kgOther:


15

kg

Other5/...........................................................45 kgOther.................................................................................7304.49.00 36%Free1/2/..................

Of high-nickel alloy steel..........................................05 kgOther:

Hollow bars.........................................................15 kgOther:


45

kgOther.............................................................60 kg

Rates of Duty1


XV73-11

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other, of circular cross section, of other alloy steel:Cold-drawn or cold-rolled (cold-reduced):7304.51

Suitable for use in the manufacture of ball or rollerbearings.....................................................................

007304.51.1034%Free1/2/kg..............

Other..........................................................................7304.51.50 35%Free1/2/..................Of high-nickel alloy steel...................................05 kgOther:

Suitable for use in boilers, superheaters,heat exchangers, condensers, refiningfurnaces and feedwater heaters:

Of heat-resisting steel..........................15 kgOther......................................................45 kg

Other.............................................................60 kgOther:7304.59

Suitable for use in the manufacture of ball or rollerbearings.....................................................................

007304.59.1034%Free1/2/kg..............

Other:Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnacesand feedwater heaters......................................

7304.59.20

35%Free1/2/..................Of heat-resisting steel................................30 kgOther:

Having an outside diameter less than38.1 mm.................................................

40kg

Having an outside diameter of38.1 mm or more but not exceeding114.3 mm..............................................

45

kgHaving an outside diameter exceeding114.3 mm but less than 190.5 mm......

55kg

Having an outside diameter of190.5 mm or more but not exceeding285.8 mm..............................................

60

kgHaving an outside diameter exceeding285.8 mm but not exceeding406.4 mm..............................................

70

kgHaving an outside diameter exceeding406.4 mm..............................................

80kg

Rates of Duty1


XV73-12

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other, of circular cross section, of other alloy steel: (con.)Other: (con.)7304.59

(con.)Other: (con.)

Other:Of heat-resisting steel................................007304.59.60 36%Free1/2/kg..............

Other.............................................................7304.59.80 35%Free1/2/..................Having an outside diameter less than38.1 mm.................................................

10kg


Having a wall thickness less than6.4 mm............................................

15kg

Having a wall thickness of 6.4mmor more but not exceeding12.7 mm..........................................

20

kgHaving awall thickness exceeding12.7 mm..........................................

25kg

Having an outside diameter exceeding114.3 mm but less than 190.5 mm:


30kg

Having a wall thickness of12.7 mm or more but less than19 mm.............................................

35

kgHaving a wall thickness of 19 mmor more............................................

40kg



45kg


50


55kg



60kg


65


70kg


80kg

Rates of Duty1


XV73-13

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7304 (con.)

Other:7304.90Having a wall thickness of 4 mm or more:

Of iron or nonalloy steel...........................................007304.90.10 1%Free1/2/kg..............

Of alloy steel..............................................................007304.90.30 8.5%Free1/2/kg..............Having a wall thickness of less than 4 mm:

Of iron or nonalloy steel...........................................007304.90.50 25%Free1/2/kg..............

Of alloy steel..............................................................007304.90.70 35%Free1/2/kg..............

Rates of Duty1


XV73-14

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other tubes and pipes (for example, welded, riveted or similarlyclosed), having circular cross sections, the external diameterof which exceeds 406.4 mm, of iron or steel:

7305

Line pipe of a kind used for oil or gas pipelines:Longitudinally submerged arc welded:7305.11

Of iron or nonalloy steel...........................................7305.11.10 5.5%Free1/2/..................With an external diameter exceeding 406.4mmbut not exceeding 609.6 mm............................

30kg

With an external diameter exceeding609.6 mm............................................................

60kg

Of alloy steel..............................................................007305.11.50 10%Free1/2/kg..............Other, longitudinally welded:7305.12


30kg


60kg

Of alloy steel..............................................................007305.12.50 10%Free1/2/kg..............Other:7305.19


30kg


60kg

Of alloy steel..............................................................007305.19.50 10%Free1/2/kg..............Casing of a kind used in drilling for oil or gas:7305.20

Of iron or nonalloy steel:Threaded or coupled................................................007305.20.20 20%Free1/2/kg..............

Other..........................................................................007305.20.40 1%Free1/2/kg..............Of alloy steel:

Threaded or coupled................................................007305.20.60 28%Free1/2/kg..............

Other..........................................................................007305.20.80 8.5%Free1/2/kg..............Other, welded:

Longitudinally welded:7305.31Tapered pipes and tubes of steel principally usedas parts of illuminating articles................................

007305.31.2045%Free1/2/kg..............

Other:Of iron or nonalloy steel....................................007305.31.40 5.5%Free1/2/kg..............

Of alloy steel.......................................................7305.31.60 10%Free1/2/..................Of stainless steel.........................................10 kgOther.............................................................90 kg

Other:7305.39Of iron or nonalloy steel...........................................007305.39.10 5.5%Free1/2/kg..............

Of alloy steel..............................................................007305.39.50 10%Free1/2/kg..............Other:7305.90

Of iron or nonalloy steel..................................................007305.90.10 5.5%Free1/2/kg..............

Of alloy steel....................................................................007305.90.50 10%Free1/2/kg..............

Rates of Duty1


XV73-15

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other tubes, pipes and hollow profiles (for example, openseamed or welded, riveted or similarly closed), of iron or steel:

7306

Line pipe of a kind used for oil or gas pipelines:Welded, of stainless steel...............................................7306.11.00 10%Free1/2/..................

With an outside diameter not exceeding114.3 mm...................................................................

10kg

With an outside diameter exceeding 114.3 mm.....50 kgOther:7306.19

Of iron or nonalloy steel...........................................7306.19.10 5.5%Free1/2/..................With an outside diameter not exceeding114.3 mm............................................................

10kg

With an outside diameter exceeding114.3 mm............................................................

50kg

Of alloy steel..............................................................7306.19.51 10%Free1/2/..................With an outside diameter not exceeding114.3 mm............................................................

10kg

With an outside diameter exceeding114.3 mm............................................................

50kg

Casing and tubing of a kind used in drilling for oil or gas:Welded of stainless steel:7306.21

Casing:Threaded or coupled.........................................007306.21.30 28%Free1/2/kg..............

Other...................................................................007306.21.40 8.5%Free1/2/kg..............Tubing........................................................................7306.21.80 10%Free1/2/..................

Imported with coupling......................................10 kgOther...................................................................50 kg

Other:7306.29Casing:

Of iron or nonalloy steel:Threaded or coupled..................................7306.29.10 20%Free1/2/..................

Imported with coupling........................30 kgOther......................................................90 kg

Other.............................................................007306.29.20 1%Free1/kg..............Other:

Threaded or coupled..................................007306.29.31 28%Free1/2/kg..............

Other.............................................................007306.29.41 8.5%Free1/2/kg..............Tubing:

Of iron or nonalloy steel....................................7306.29.60 5.5%Free1/2/..................Imported with coupling...............................10 kgOther.............................................................50 kg

Other...................................................................7306.29.81 10%Free1/2/..................Imported with coupling...............................10 kgOther.............................................................50 kg

Rates of Duty1


XV73-16

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other tubes, pipes and hollow profiles (for example, openseamed or welded, riveted or similarly closed), of iron or steel:(con.)

7306 (con.)

Other, welded, of circular cross section, of iron or nonalloysteel:

7306.30

Having a wall thickness of less than 1.65 mm.............007306.30.10 25%Free1/2/kg..............

Having a wall thickness of 1.65 mm or more:Tapered steel pipes and tubes principally used asparts of illuminating articles.....................................

007306.30.3045%Free1/2/kg..............

Other..........................................................................7306.30.50 5.5%Free1/2/..................Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnacesand feedwater heaters, whether or not colddrawn..................................................................

10

kgOther, cold-drawn..............................................15 kgOther, cold-rolled (cold-reduced) with a wallthickness not exceeding 2.54 mm...................

20kg

Other:With an outside diameter not exceeding114.3 mm:

Galvanized:Imported with coupling..................25 kgInternally coated or lined with anon-electrically insulatingmaterial,suitable for use as electricalconduit............................................

28

kgOther...............................................32 kg

Other:Tube and pipe hollows forredrawing........................................

35kg

Other, imported with coupling......40 kgOther...............................................55 kg

With an outside diameter exceeding114.3 mm but not exceeding 406.4 mm:

Galvanized............................................85 kgOther......................................................90 kg

Rates of Duty1


XV73-17

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7306 (con.)

Other, welded, of circular cross section, of stainless steel:7306.40Having a wall thickness of less than 1.65 mm.............7306.40.10 36%Free1/2/..................

Containing more than 0.5 percent by weight ofnickel:

Containingmore than 1.5 percent but less than5 percent by weight of molybdenum................

10kg

Other...................................................................15 kgOther..........................................................................90 kg

Having a wall thickness of 1.65 mm or more...............7306.40.50 11%Free1/2/..................Of high-nickel alloy steel..........................................05 kgOther:

Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnacesand feedwater heaters, whether or notcold-drawn..........................................................

15

kgOther, cold-drawn or cold-rolled (cold-reduced):

Containing more than 0.5 percent but lessthan 24 percent by weight of nickel..........

40kg

Other:Containing less than 15 percent byweight of chromium..............................

42kg

Other......................................................44 kgOther:

With an outside diameter not exceeding114.3 mm:

Containing more than 0.5 percent butless than 24 percent by weight ofnickel:

Containing more than 1.5 percentbut less than 5 percent by weightof molybdenum..............................

62

kgOther...............................................64 kg

Other......................................................80 kgWith an outside diameter exceeding114.3 mm but not exceeding 406.4 mm:

Containing more than 0.5 percent butless than 24 percent by weight ofnickel......................................................

85

kgOther......................................................90 kg

Rates of Duty1


XV73-18

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7306 (con.)

Other, welded, of circular cross section, of other alloy steel:7306.50Having a wall thickness of less than 1.65 mm.............007306.50.10 35%Free1/2/kg..............

Having a wall thickness of 1.65 mm or more:Tapered pipes and tubes of steel principally usedas parts of illuminating articles................................

007306.50.3045%Free1/2/kg..............

Other..........................................................................7306.50.50 10%Free1/2/..................Suitable for use in boilers, superheaters, heatexchangers, condensers, refining furnacesand feedwater heaters, whether or notcold-drawn..........................................................

10

kgOther, cold-drawn or cold-rolled (cold-reduced)..............................................................

30kg

Other:With an outside diameter not exceeding114.3 mm.....................................................

50kg

With an outside diameter exceeding114.3 mm but not exceeding 406.4 mm....

70kg

Other, welded, of noncircular cross section:Of square or rectangular cross section:7306.61

Having a wall thickness of 4 mm or more:Of iron or nonalloy steel....................................007306.61.10 1%Free1/2/kg..............

Of alloy steel.......................................................007306.61.30 28%Free1/2/kg..............Having a wall thickness of less than 4 mm:

Of iron or nonalloy steel....................................007306.61.50 25%Free1/2/kg..............


Of other noncircular cross section:7306.69Having a wall thickness of 4 mm or more:


Of alloy steel.......................................................007306.69.30 28%Free1/2/kg..............Having a wall thickness of less than 4 mm:



Other:7306.90Of iron or nonalloy steel..................................................007306.90.10 5.5%Free1/2/kg..............

Of alloy steel....................................................................007306.90.50 10%Free1/2/kg..............

Rates of Duty1


XV73-19

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Tube or pipe fittings (for example, couplings, elbows, sleeves),of iron or steel:

7307

Cast fittings:Of nonmalleable cast iron...............................................7307.11.00 25%Free (A*, AU, BH,

CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

4.8%3/..................

For threaded pipe.....................................................30 kgOther:

For cast-iron soil pipe........................................45 kgOther...................................................................60 kg

Other:7307.19Ductile fittings............................................................7307.19.30 45%Free (A*, AU, BH,


5.6%3/..................

Grooved-end fittings (including groovedcouplings)...........................................................

40kg

Other:Threaded......................................................60 kgWith mechanical, push-on (rubbercompression) or flanged joints attached...

70kg

Other.............................................................85 kgOther..........................................................................7307.19.90 45%Free (A+, AU, BH,


6.2%3/..................

Unions.................................................................30 kgOther:

Grooved-end fittings (including groovedcouplings).....................................................

40kg

Other:Threaded...............................................60 kg

Other6/....................................................80 kg

Rates of Duty1


XV73-20

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Tube or pipe fittings (for example, couplings, elbows, sleeves),of iron or steel: (con.)

7307 (con.)

Other, of stainless steel:Flanges:7307.21

Not machined, not tooled and not otherwiseprocessed after forging............................................

007307.21.1034%Free (A*, AU, BH,


3.3%3/kg..............

Other..........................................................................007307.21.50 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

5.6%3/kg..............

Threaded elbows, bends and sleeves:7307.22Sleeves (couplings)..................................................007307.22.10 45%Free3/kg..............

Other..........................................................................007307.22.50 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

6.2%3/kg..............

Butt welding fittings.........................................................7307.23.00 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

5%3/..................

Not machined, not tooled and not otherwiseprocessed after forming...........................................

30kg

Other..........................................................................90 kgOther.................................................................................7307.29.00 45%Free (A*, AU, B, BH,


5%3/..................

Nipples.......................................................................30 kgOther..........................................................................90 kg

Rates of Duty1


XV73-21

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7307 (con.)

Other:Flanges:7307.91

Not machined, not tooled and not otherwiseprocessed after forging:

Of iron or nonalloy steel....................................007307.91.10 25%Free (A, AU, BH, CL,CO, D, E, IL, JO,JP, KR, MA, OM,P, PA, PE, S, SG)

3.3%3/kg..............

Of alloy steel (except stainless steel)..............007307.91.30 33%Free (A*, AU, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

3.2%3/kg..............

Other..........................................................................7307.91.50 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.75% (JP)

5.5%3/..................

With an inside diameter of less than 360 mm:Of iron or nonalloy steel..............................10 kgOf alloy steel (except stainless steel).......30 kg

With an inside diameter of 360 mm or more:Of iron or nonalloy steel..............................50 kgOf alloy steel (except stainless steel).......70 kg

Threaded elbows, bends and sleeves:7307.92Sleeves (couplings)..................................................7307.92.30 45%Free3/..................

Of iron or nonalloy steel....................................10 kg

Of alloy steel (except stainless steel)7/............30 kgOther..........................................................................007307.92.90 45%Free (A, AU, B, BH,


3.1% (JP)

6.2%3/kg..............

Rates of Duty1


XV73-22

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7307 (con.)

Other: (con.)Butt welding fittings:7307.93

With an inside diameter of less than 360 mm:Of iron or nonalloy steel....................................7307.93.30 45%Free (A+, AU, B, BH,


6.2%3/..................

Not machined, not tooled and nototherwise processed after forging.............

10kg

Other.............................................................40 kgOf alloy steel (except stainless steel)7/............007307.93.60 45%Free (A*, AU, B, BH,


5.5%3/kg..............

With an inside diameter of 360 mm or more..........7307.93.90 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

4.3%3/..................

Of iron or nonalloy steel:Not machined, not tooled and nototherwise processed after forging.............

10kg

Other.............................................................40 kgOf alloy steel (except stainless steel)..............60 kg

Other:7307.99Not machined, not tooled and not otherwiseprocessed after forging:

Of iron or nonalloy steel....................................007307.99.10 25%Free (A, AU, BH, CL,CO, D, E, IL, JO,JP, KR, MA, OM,P, PA, PE, S, SG)

3.7%3/kg..............

Of alloy steel (except stainless steel)..............007307.99.30 33%Free (A, AU, BH, CL,CO, D, E, IL, JO,JP, KR, MA, OM,P, PA, PE, S, SG)

3.2%3/kg..............

Other..........................................................................7307.99.50 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

4.3%3/..................

Of iron or nonalloy steel:Nipples8/.......................................................15 kgOther.............................................................45 kg

Of alloy steel (except stainless steel)..............60 kg

Rates of Duty1


XV73-23

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Structures (excluding prefabricated buildings of heading 9406)and parts of structures (for example, bridges and bridgesections, lock gates, towers, lattice masts, roofs, roofingframeworks, doors and windows and their frames andthresholds for doors, shutters, balustrades, pillars and columns)of iron or steel; plates, rods, angles, shapes, sections, tubesand the like, prepared for use in structures, of iron or steel:

7308

Bridges and bridge sections.................................................007308.10.00 45%Free9/kg..............

Towers and lattice masts......................................................7308.20.00 45%Free9/..................Tubular, whether or not tapered, and sectionalcomponents thereof........................................................

20kg

Other.................................................................................90 kgDoors, windows and their frames and thresholds for doors:7308.30

Of stainless steel10/..........................................................007308.30.10 35%Free3/kg..............

Other.................................................................................7308.30.50 25%Free3/..................Windows and their frames.......................................15 kgThresholds for doors................................................25 kg

Other11/.......................................................................50 kgEquipment for scaffolding, shuttering, propping or pit-propping12/...............................................................................

007308.40.0045%Free3/kg..............

Other:7308.90Columns, pillars, posts, beams, girders and similarstructural units:

Not in part of alloy steel13/........................................007308.90.30 20%Free9/kg..............

Other..........................................................................007308.90.60 30%Free9/kg..............Other:

Steel grating..............................................................007308.90.70 45%Free9/kg..............

Other..........................................................................7308.90.95 45%Free9/..................Sheet-metal roofing, siding, flooring and roofdrainage equipment...........................................

30kg

Other:Architectural and ornamental work...........60 kg

Other14/.........................................................90 kgReservoirs, tanks, vats and similar containers for any material(other than compressed or liquefied gas), of iron or steel, of acapacity exceeding 300 liters, whether or not lined or heatinsulated, but not fitted with mechanical or thermalequipment......................................................................................

7309.00.00

45%Free3/..................Tanks15/...................................................................................30 No.

kgOther........................................................................................90 No.

kg

Rates of Duty1


XV73-24

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Tanks, casks, drums, cans, boxes and similar containers, forany material (other than compressed or liquefied gas), of ironor steel, of a capacity not exceeding 300 liters, whether or notlined or heat insulated, but not fitted withmechanical or thermalequipment:

7310

Of a capacity of 50 liters or more.........................................7310.10.00 25%Free3/..................Refillable stainless steel kegs, whether or notpressurized, of a kind described in statistical note 1 tothis chapter.......................................................................

05

No.

Empty steel drums and barrels16/...................................15 No.kg

Other.................................................................................90 kgOf a capacity of less than 50 liters:

Cans which are to be closed by soldering orcrimping............................................................................

7310.21.0025%Free3/..................

Containers, of circular cross section, of a volumecapacity between 11.4 liters and 26.6 liters, of akind used for the conveyance of goods17/..............

25

No.Other..........................................................................50 No.

Other.................................................................................7310.29.00 25%Free3/..................Containers, of circular cross section, of a volumecapacity between 11.4 liters and 26.6 liters, of akind used for the conveyance of goods

Refillable stainless steel kegs, whether or notpressurized, of a kind described in statisticalnote 1 to this chapter.........................................

20

No.Other...................................................................30 No.

OtherRefillable stainless steel kegs, whether or notpressurized, of a kind described in statisticalnote 1 to this chapter.........................................

55

No.Other...................................................................65 No.

Containers for compressed or liquefied gas, of iron or steel....7311.00.00 25%Free3/..................Certified prior to exportation to have been made inaccordancewith the safety requirements of sections 178.36through 178.68 of title 49 CFR or under a specificexemption to those requirements:

Seamless steel containers not overwrapped, markedDOT3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-Efollowed by a specific exemption number.....................

30

No.kg

Other.................................................................................60 No.kg

Other........................................................................................90 No.kg

Rates of Duty1


XV73-25

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Stranded wire, ropes, cables, plaited bands, slings and thelike, of iron or steel, not electrically insulated:

7312

Stranded wire, ropes and cables:7312.10Stranded wire:

Of stainless steel:Fitted with fittings or made up into articles......007312.10.05 45%Free3/kg..............

Other...................................................................7312.10.10 45%Free3/..................Tire cord.......................................................30 kgOther, stranded wire having a lay or twistof not more than 1 revolution for a lengthequal to the strand diameter multiplied by8.5.................................................................

50

kgOther.............................................................70 kg

Other:Fitted with fittings or made up into articles......007312.10.20 45%Free3/kg..............

Other...................................................................7312.10.30 35%Free3/..................Tire cord.......................................................05 kgFor prestressing concrete:

Covered with textile or other non-metallic material...................................

10kg

Other......................................................12 kgOther, stranded wire having a lay or twistof not more than 1 revolution for a lengthequal to the strand diameter multiplied by8.5.................................................................

20

kgOther:

Of brass plated wire.............................45 kgOther:

Galvanized:ACSR core strand...................65 kgOther:

Covered with textile orother nonmetallicmaterial.............................

70

kgOther.................................74 kg

Other...............................................80 kg

Rates of Duty1


XV73-26

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Stranded wire, ropes, cables, plaited bands, slings and thelike, of iron or steel, not electrically insulated: (con.)

7312 (con.)

Stranded wire, ropes and cables: (con.)7312.10(con.)

Ropes, cables and cordage other than stranded wire:Of stainless steel:

Fitted with fittings or made up into articles......007312.10.50 45%Free3/kg..............

Other...................................................................7312.10.60 45%Free3/..................With a diameter not exceeding 9.5 mm.....30 kgOther.............................................................60 kg

Other:Fitted with fittings or made up into articles......007312.10.70 45%Free3/kg..............

Other:Of brass plated wire....................................007312.10.80 35%Free3/kg..............

Other.............................................................7312.10.90 35%Free3/..................Galvanized:

With a diameter not exceeding9.5 mm............................................

30kg

With a diameter exceeding9.5 mm............................................

60kg

Other......................................................90 kgOther........................................................................................007312.90.00 45%Free3/kg..............

Barbed wire of iron or steel; twisted hoop or single flat wire,barbed or not, and loosely twisted double wire, of a kind usedfor fencing, of iron or steel............................................................

007313.00.00

FreeFree3/kg..............

Cloth (including endless bands), grill, netting and fencing, ofiron or steel wire; expanded metal of iron or steel:

7314

Woven cloth:Endless bands for machinery, of stainless steel:7314.12

With meshes not finer than 12 wires to the linealcentimeter in warp or filling......................................

007314.12.1035%Free3/m2..............

kgWith meshes finer than 12 but not finer than36 wires to the lineal centimeter in warp or filling..

007314.12.2050%Free3/m2..............

kgWith meshes finer than 36 wires to the linealcentimeter in warp or filling:

Fourdrinier wires, seamed or not seamed,suitable for use in papermaking machines:

With 94 or more wires to the linealcentimeter....................................................

007314.12.3075%Free3/m2..............

kgOther.............................................................007314.12.60 75%Free3/m2..............

kgOther...................................................................007314.12.90 60%Free3/m2..............

kg

Rates of Duty1


XV73-27

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Cloth (including endless bands), grill, netting and fencing, ofiron or steel wire; expanded metal of iron or steel: (con.)

7314 (con.)

Woven cloth: (con.)Other woven cloth, of stainless steel:7314.14

With meshes not finer than 12 wires to the linealcentimeter in warp or filling18/..................................

007314.14.1035%Free3/m2..............

kgWith meshes finer than 12 but not finer than36 wires to the lineal centimeter in warp or filling..

007314.14.2050%Free3/m2..............

kgWith meshes finer than 36 wires to the linealcentimeter in warp or maximum:

Fourdrinier wires, seamed or not seamed,suitable for use in papermaking machines:

With 94 or more wires to the linealcentimeter....................................................

007314.14.3075%Free3/m2..............

kgOther.............................................................007314.14.60 75%Free3/m2..............

kgOther...................................................................007314.14.90 60%Free3/m2..............

kgOther.................................................................................007314.19.01 60%Free3/m2..............

kgGrill, netting and fencing, welded at the intersection, ofwire with a maximum cross-sectional dimension of 3 mmor more and having a mesh size of 100 cm2 or more.........

007314.20.00

45%Free3/kg..............

Other grill, netting and fencing, welded at the intersection:Plated or coated with zinc:7314.31

Wire fencing plated or coated with zinc, whetheror not covered with plastic material........................

007314.31.101.1¢/kgFree3/kg..............

Other:.........................................................................7314.31.50 45%Free3/..................Welded wire stucco netting, furred, notreinforced with supplemental horizontalwire......................................................................

10

kgOther...................................................................80 kg

Other.................................................................................007314.39.00 45%Free3/kg..............Other grill, netting and fencing:

Plated or coated with zinc..............................................7314.41.00 1.1¢/kgFree3/..................Chain link fencing.....................................................30 kgWoven wire stucco netting, furred, not reinforcedwith supplemental horizontal wire:

Of wire with maximum cross- sectionaldimension of 1 mm............................................

40kg

Other...................................................................45 kgOther..........................................................................80 kg

Coated with plastics........................................................7314.42.00 1.1¢/kgFree3/..................Chain link fencing.....................................................30 kgOther..........................................................................60 kg

Other:7314.49Not cut to shape........................................................007314.49.30 45%Free3/kg..............

Cut to shape..............................................................007314.49.60 35%Free3/kg..............

Rates of Duty1


XV73-28

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Cloth (including endless bands), grill, netting and fencing, ofiron or steel wire; expanded metal of iron or steel: (con.)

7314 (con.)

Expanded metal.....................................................................007314.50.00 45%Free3/m2..............kg

Chain and parts thereof, of iron or steel:7315Articulated link chain and parts thereof:

Roller chain......................................................................7315.11.00 40%Free3/..................For motor vehicles....................................................05 kgOther:

Of not over 50 mm pitch and containing morethan 3 parts per pitch:

Bicycle chains..............................................10 kgOther.............................................................45 kg

Other...................................................................60 kgOther chain.......................................................................7315.12.00 40%Free3/..................

Of not over 50mm pitch and containing more than3 parts per pitch........................................................

20kg

Other:Welded steel chain............................................40 kgCast and combination chain.............................60 kg

Other19/................................................................80 kgParts..................................................................................007315.19.00 40%Free3/kg..............

Skid chain:7315.20Not over 8 mm in diameter15/..........................................007315.20.10 10%Free3/kg..............

Over 8 mm in diameter...................................................007315.20.50 2.5¢/kgFree3/kg..............Other chain:

Stud link............................................................................007315.81.00 4.4¢/kgFree3/kg..............

Other, welded link:7315.82Of alloy steel:

Not over 10 mm in diameter.............................007315.82.10 10%Free3/kg..............

Over 10 mm in diameter...................................007315.82.30 10%Free3/kg..............Of iron or nonalloy steel:

Not over 10 mm in diameter6/...........................007315.82.50 10%Free3/kg..............

Over 10 mm in diameter...................................007315.82.70 10%Free3/kg..............Other:7315.89

With links of essentially round cross sections:Not over 8 mm in diameter...............................007315.89.10 10%Free (A, AU, B, BH,


1.5%3/kg..............

Over 8 mm in diameter......................................007315.89.30 4.7¢/kgFree3/kg..............Other..........................................................................007315.89.50 45%Free (A, AU, B, BH,


3.9%3/kg..............

Other parts..............................................................................007315.90.00 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.9%3/kg..............

Anchors, grapnels and parts thereof, of iron or steel................007316.00.00 25%Free3/No.............kg

Rates of Duty1


XV73-29

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Nails, tacks, drawing pins, corrugated nails, staples (otherthan those of heading 8305) and similar articles, of iron orsteel, whether or not with heads of othermaterial, but excludingsuch articles with heads of copper:

7317.00

Thumb tacks...........................................................................007317.00.10 4%Free1/kg..............

Other, suitable for use in powder-actuated handtools:Not threaded20/.................................................................007317.00.20 1.5¢/kgFree3/kg..............

Threaded..........................................................................007317.00.30 45%Free3/2/kg..............Other:

Of one piece construction:Made of round wire...................................................7317.00.55 3.5%Free3/2/..................

Collated nails:Collated roofing nails with a length of20.6 mm to 46.1 mm, a head diameter of8.3 mm to 10.6 mm, a shank diameter of2.5 mm to 3.2 mm, whether or notgalvanized....................................................

01

kgOther:

Assembled in a wire coil:Galvanized.....................................02 kgOther...............................................03 kg

Assembled in a plastic strip:Galvanized.....................................05 kgOther...............................................07 kg

Assembled in a paper strip.................08 kgAssembled in a wire strip....................11 kgOther......................................................18 kg

Other:With a length of less than 25.4 mm andwith a diameter of less than 1.65 mm.......

19kg

Other:Smooth shank:

Not coated, plated or painted.......20 kgCoated, plated or painted:

Galvanized...............................30 kgVinyl, resin or cementcoated......................................

40kg

Other........................................50 kgOther:

Not coated, plated or painted.......60 kgCoated, plated or painted:

Galvanized...............................70 kgVinyl, resin or cementcoated......................................

80kg

Other........................................90 kgOther..........................................................................7317.00.65 5.5%Free3/2/..................

Cut.......................................................................30 kgOther...................................................................60 kg

Of two or more pieces.....................................................007317.00.75 8%Free3/kg..............

Rates of Duty1


XV73-30

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters,cotter pins, washers (including spring washers) and similararticles, of iron or steel:

7318

Threaded articles:Coach screws..................................................................007318.11.00 25%Free (A+, AU, B, BH,


12.5%3/kg..............

Other wood screws.........................................................007318.12.00 25%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

12.5%3/kg..............

Screw hooks and screw rings........................................7318.13.00 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

5.7%3/..................

Having shanks or threads with a diameter of lessthan 6 mm..................................................................

30kg

Having shanks or threads with a diameter of 6mmor more.......................................................................

60kg

Self-tapping screws:7318.14Having shanks or threads with a diameter of lessthan 6 mm..................................................................

7318.14.1045%Free (A+, AU, B, BH,


3.1% (JP)

6.2%3/..................

Of stainless steel................................................30 kgOther...................................................................60 kg

Having shanks or threads with a diameter of 6mmor more.......................................................................

7318.14.5045%Free (A+, AU, B, BH,


4.3% (JP)

8.6%21/..................

Of stainless steel................................................20 kgOther...................................................................80 kg

Rates of Duty1


XV73-31

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters,cotter pins, washers (including spring washers) and similararticles, of iron or steel: (con.)

7318 (con.)

Threaded articles: (con.)Other screws and bolts, whether or not with their nutsor washers:

7318.15

Bolts and bolts and their nuts or washers enteredor exported in the same shipment..........................

7318.15.203.5%Free3/..................

Having shanks or threads with a diameter ofless than 6 mm...................................................

10kg

Having shanks or threads with a diameter of6 mm or more:

Track bolts...................................................20 kgStructural bolts............................................30 kgBent bolts:

Right-angle anchor bolts.....................41 kg

Other22/..................................................46 kgOther:

With round heads:Of stainless steel...........................51 kgOther...............................................55 kg

With hexagonal heads:Of stainless steel...........................61 kg

Other6/.............................................65 kgOther:

Of stainless steel...........................91 kgOther...............................................95 kg

Machine screws 9.5 mm or more in length and3.2 mm or more in diameter (not including capscrews)......................................................................

007318.15.40

2.2¢/kgFree3/kg..............

Studs..........................................................................7318.15.50 45%Free3/..................Of stainless steel................................................30 kgOther:

Continuously threaded rod:Of alloy steel.........................................51 kgOther......................................................56 kg

Other.............................................................90 kg

Rates of Duty1


XV73-32

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7318 (con.)

Threaded articles: (con.)Other screws and bolts, whether or not with their nutsor washers: (con.)

7318.15(con.)

Other:Having shanks or threads with a diameter ofless than 6 mm...................................................

7318.15.6045%Free (A*, AU, B, BH,


6.2%3/..................

Socket screws:Of stainless steel..................................10 kgOther......................................................40 kg

Other:Of stainless steel..................................70 kgOther......................................................80 kg

Having shanks or threads with a diameter of6 mm or more.....................................................

7318.15.8045%Free (A*, AU, B, BH,


8.5%3/..................

Set screws...................................................20 kgOther:

Socket screws:Of stainless steel...........................30 kgOther...............................................45 kg

Other:With hexagonal heads:

Of stainless steel....................55 kgOther:

Cap screws.......................66 kg

Other23/..............................69 kgOther:

Of stainless steel17/.................82 kgOther........................................85 kg

Nuts...................................................................................7318.16.00 0.5%Free1/..................Lugnuts:

Non-locking chrome-plated..............................15 kgLocking................................................................30 kgOther...................................................................45 kg

Other:Of stainless steel................................................60 kgOther...................................................................85 kg

Other.................................................................................007318.19.00 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.85% (JP)

5.7%3/kg..............

Rates of Duty1


XV73-33

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral


7318 (con.)

Non-threaded articles:Spring washers and other lock washers.......................7318.21.00 35%Free (A, AU, B, BH,


2.9% (JP)

5.8%3/..................

Helical spring lock washers.....................................30 kgOther..........................................................................90 kg

Other washers.................................................................007318.22.00 1.3¢/kgFree3/kg..............

Rivets................................................................................007318.23.00 2.2¢/kgFree3/kg..............

Cotters and cotter pins...................................................007318.24.00 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

3.8%3/kg..............

Other.................................................................................007318.29.00 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

2.8%3/kg..............

Sewing needles, knitting needles, bodkins, crochet hooks,embroidery stilettos and similar articles for use in the hand, ofiron or steel; safety pins and other pins of iron or steel, notelsewhere specified or included:

7319

Safety pins and other pins:7319.40Safety pins.......................................................................7319.40.20 35%Free (A, AU, BH, CL,

CO, D, E, IL, JO,KR, MA, OM, P,PA, PE, S, SG)

4.5%1/..................

On cards....................................................................10 GrossOther..........................................................................50 Gross

Dressmakers' or common pins......................................007319.40.30 35%Free (A, AU, BH, CL,CO, D, E, IL, JO,KR, MA, OM, P,PA, PE, S, SG)

4.1%1/kg..............

Other.................................................................................7319.40.50 35%Free1/..................Push pins...................................................................10 kgOther..........................................................................50 kg

Other:7319.90Sewing, darning or embroidery needles.......................007319.90.10 FreeFree1/Thousand..

Other.................................................................................007319.90.90 45%Free (A, AU, BH, CL,CO, D, E, IL, JO,KR, MA, OM, P,PA, PE, S, SG)

2.9%1/No.............

Rates of Duty1


XV73-34

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Springs and leaves for springs, of iron or steel:7320Leaf springs and leaves therefor:7320.10

Suitable for motor vehicle suspension:To be used in motor vehicles having a G.V.W. notexceeding 4 metric tons...........................................

007320.10.3025%Free (A*, AU, B, BH,


3.2%3/kg..............

Other..........................................................................7320.10.60 25%Free (A+, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

3.2%3/..................

Leaf springs having individual leaves with athickness of 1.6 mm or more and leavestherefor................................................................

15

kgOther...................................................................60 kg

Other.................................................................................7320.10.90 25%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

3.2%3/..................

Leaf springs having individual leaves with athickness of 1.6 mm or more and leavestherefor.......................................................................

15

kgOther..........................................................................60 kg

Helical springs:7320.20Suitable for motor-vehicle suspension..........................007320.20.10 25%Free (A, AU, B, BH,


3.2%1/kg..............

Other.................................................................................7320.20.50 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

3.9%1/..................

Helical springs, of wire having a cross-sectionaldimension of less than 5.1 mm:

Suitable for use in mattress supports andmattresses of heading 9404.............................

10kg

Other...................................................................20 kgHelical springs, of wire having a cross-sectionaldimension of 5.1 mm or more but less than12.7 mm.....................................................................

45

kgOther..........................................................................60 kg

Other:7320.90Hairsprings.......................................................................007320.90.10 65%Free3/kg..............

Other.................................................................................7320.90.50 45%Free (A*, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

2.9%3/..................

Of wire:Suitable for use in mattress supports andmattresses of heading 9404.............................

10kg

Other...................................................................20 kgOther..........................................................................60 kg

Rates of Duty1


XV73-35

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Stoves, ranges, grates, cookers (including those withsubsidiary boilers for central heating), barbecues, braziers,gas rings, plate warmers and similar nonelectric domesticappliances, and parts thereof, of iron or steel:

7321

Cooking appliances and plate warmers:For gas fuel or for both gas and other fuels:7321.11

Portable.....................................................................7321.11.10 45%Free (A, AU, BH, CL,CO, D, E, IL, JO,KR, MA, OM, P,PA, PE, S, SG)

5.7%24/..................

Stoves or ranges................................................30 No.

Other25/................................................................60 No.Other:

Stoves or ranges:...............................................7321.11.30 45%Free3/..................Of a maximum width not exceeding70 centimeters.............................................

10No.

Of amaximumwidth exceeding 70 but notexceeding 80 centimeters..........................

20No.

Of a maximum width exceeding80 centimeters.............................................

50No.

Other...................................................................007321.11.60 45%Free3/No.............For liquid fuel...................................................................007321.12.00 45%Free4/No.............

Other, including appliances for solid fuel......................7321.19.00 45%Free4/..................Portable:

Hibachis..............................................................20 No.Other...................................................................40 No.

Other:Of cast iron.........................................................60 No.Other...................................................................80 No.

Other appliances:For gas fuel or for both gas and other fuels:7321.81

Portable.....................................................................007321.81.10 45%Free (A*, AU, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.9%4/No.............

Other..........................................................................007321.81.50 45%Free1/No.............For liquid fuel:7321.82

Portable.....................................................................007321.82.10 45%Free (A, AU, BH, CL,CO, D, E, IL, JO,KR, MA, OM, P,PA, PE, S, SG)

2.9%1/No.............

Other..........................................................................007321.82.50 45%Free1/No.............Other, including appliances for solid fuel......................7321.89.00 45%Free1/..................

Fireplace grates of cast iron....................................10 No.Other..........................................................................50 No.

Rates of Duty1


XV73-36

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Stoves, ranges, grates, cookers (including those withsubsidiary boilers for central heating), barbecues, braziers,gas rings, plate warmers and similar nonelectric domesticappliances, and parts thereof, of iron or steel: (con.)

7321 (con.)

Parts:7321.90Of articles in subheading 7321.11.30:

Cooking chambers, whether or notassembled16/..............................................................

007321.90.1045%Free3/No.............

kgTop surface panels with or without burners orcontrols......................................................................

007321.90.2045%Free3/No.............

kgDoor assemblies, incorporating more than one ofthe following: inner panel, outer panel, window,insulation....................................................................

007321.90.40

45%Free3/No.............kg

Other..........................................................................007321.90.50 45%Free3/No.............kg

Other.................................................................................7321.90.60 45%Free3/..................Of cooking appliances and plate warmers:

Shelving and racks for cooking ovens.............40 No.kg

Other22/................................................................60 No.kg

Other26/.......................................................................90 No.kg

Radiators for central heating, not electrically heated, and partsthereof, of iron or steel; air heaters and hot air distributors(including distributors which can also distribute fresh orconditioned air), not electrically heated, incorporating amotor-driven fan or blower, and parts thereof, of iron or steel:

7322

Radiators and parts thereof:Of cast iron.......................................................................007322.11.00 45%Free3/No.............

Other.................................................................................007322.19.00 45%Free3/No.............Other, including parts............................................................7322.90.00 45%Free3/..................

Air heaters, not electrically heated, incorporating amotor-driven fan or blower23/..........................................

15No.kg

Hot air distributors, not electrically heated,incorporating a motor-driven fan or blower..................

30No.kg

Parts of air heaters and hot air distributors..................45 No.

Rates of Duty1


XV73-37

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of iron or steel; iron or steel wool; pot scourers and scouringor polishing pads, gloves and the like, of iron or steel:

7323

Iron or steel wool; pot scourers and scouring or polishingpads, gloves and the like.......................................................

007323.10.0022¢/kg + 30%Free3/kg..............

Other:Of cast iron, not enameled:7323.91

Coated or plated with precious metal.....................007323.91.10 20%Free1/No.............kg

Other..........................................................................7323.91.50 40%Free (A*, AU, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

5.3%4/..................

Bakeware (cookware not suitable for stove topuse)......................................................................

20No.kg

Other...................................................................40 No.kg

Of cast iron, enameled....................................................7323.92.00 35.5%Free1/..................Bakeware (cookware not suitable for stove topuse)............................................................................

20No.kg

Other..........................................................................40 No.kg

Of stainless steel.............................................................7323.93.00 40%Free (A*, AU, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2%27/..................

Cooking and kitchen ware:Teakettles...........................................................15 No.

kgOther:

Cooking ware:Bakeware (cookware not suitable forstove top use).......................................

35No.kg

Other......................................................45 No.kg

Kitchen ware................................................60 No.kg

Other..........................................................................80 No.kg

Rates of Duty1


XV73-38

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of iron or steel; iron or steel wool; pot scourers and scouringor polishing pads, gloves and the like, of iron or steel: (con.)

7323 (con.)

Other: (con.)Of iron (other than cast iron) or steel, enameled.........7323.94.00 35.5%Free (A, AU, BH, CL,


2.7%1/..................

Cooking and kitchen ware:Of steel:

Teakettles....................................................10 No.kg

Other:Cooking ware:

Bakeware (cookware not suitablefor stove top use)...........................

21No.kg

Other...............................................26 No.kg

Kitchen ware.........................................30 No.kg

Other...................................................................40 No.kg

Other..........................................................................80 No.kg

Rates of Duty1


XV73-39

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of iron or steel; iron or steel wool; pot scourers and scouringor polishing pads, gloves and the like, of iron or steel: (con.)

7323 (con.)

Other: (con.)Other:7323.99

Coated or plated with precious metal:Coated or plated with silver..............................007323.99.10 50%Free1/No.............

kgOther...................................................................007323.99.30 65%Free (A*, AU, BH,


8.2%4/No.............kg

Not coated or plated with precious metal:Of tinplate...........................................................7323.99.50 40%Free4/..................

Kitchen or tableware suitable for food ordrink contact................................................

30No.kg

Other.............................................................60 No.kg

Other:Cookingware................................................007323.99.70 40%Free (A*, AU, BH,


5.3%4/No.............kg

Other.............................................................7323.99.90 40%Free (A*, AU, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

3.4%28/..................

Kitchen or tableware suitable for foodor drink contact8/...................................

30No.kg

Gates for confining children orpets29/.....................................................

40No.

Other30/..................................................80 No.Sanitary ware and parts thereof, of iron or steel:7324

Sinks and wash basins, of stainless steel...........................7324.10.00 40%Free (A*, AU, BH, C,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

3.4%3/..................

Stainless steel sinks with one or more drawn bowls(basins).............................................................................

10No.

Other.................................................................................50 No.Baths:

Of cast iron, whether or not enamelled:7324.21Coated or plated with precious metal.....................007324.21.10 20%Free3/No.............

Other23/.......................................................................007324.21.50 40%Free3/No.............Other.................................................................................007324.29.00 40%Free1/No.............

Other, including parts31/.........................................................007324.90.00 40%Free3/No.............

Rates of Duty1


XV73-40

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other cast articles of iron or steel:7325Of nonmalleable cast iron.....................................................7325.10.00 10%Free3/..................

Manhole covers, rings and frames................................10 kgCatch basins, grates and frames...................................20 kgCleanout covers and frames..........................................25 kgValve and service boxes.................................................30 kgMeter boxes.....................................................................35 kgOther.................................................................................80 kg

Other:Grinding balls and similar articles for mills...................007325.91.00 45%Free (A, AU, BH, CL,


2.9%3/kg..............

Other:7325.99Of cast iron8/..............................................................007325.99.10 20%Free3/kg..............

Other8/........................................................................007325.99.50 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.9%3/kg..............

Other articles of iron or steel:7326Forged or stamped, but not further worked:

Grinding balls and similar articles for mills...................007326.11.00 27.5%Free3/kg..............

Other.................................................................................7326.19.00 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

2.9%3/..................

Forged........................................................................10 kg

Other23/.......................................................................80 kgArticles of iron or steel wire...................................................7326.20.00 45%Free (A, AU, B, BH,

C, CL, CO, D, E, IL,JO, KR, MA, OM,P, PA, PE, S, SG)

3.9%3/..................

Belts and belting..............................................................10 kgGarment hangers............................................................20 No.Sod staples, U staples, irrigation staples, groundstaples, and ground pins................................................

30No.

Double loop bar ties and double loop wire ties............40 No.Paint roller frames...........................................................55 No.Other.................................................................................90 No.

Rates of Duty1


XV73-41

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other articles of iron or steel: (con.)7326 (con.)Other:7326.90

Of tinplate.........................................................................007326.90.10 45%Free3/No.............kg

Other:Cable or inner wire for caliper and cantileverbrakes and casing therefor, whether or not cut tolength.........................................................................

007326.90.25

45%Free3/kg..............

Containers of a kind normally carried on theperson, in the pocket or in the handbag.................

007326.90.35110%Free (AU, BH, CL,


7.8%3/doz............

Horse and mule shoes.............................................007326.90.45 10%Free3/kg..............

Other:Coated or plated with precious metal..............007326.90.60 65%Free (A, AU, BH, CL,


8.6%3/No.............kg

Other...................................................................7326.90.86 45%Free (A, AU, B, BH,CL, CO, D, E, IL,JO, JP, KR, MA,OM, P, PA, PE, S,SG)

2.9%32/..................

Rods for electrical grounding.....................05 kgLaminated goods consisting of two ormoreflat-rolled sheets of iron or steel heldtogether with an adhesive or having a coreof non-metallic material..............................

10

kgHangers and similar supports for tubesand pipes.....................................................

30kg

Fence posts, studded with corrugations,knobs, studs, notches or similarprotrusions, with or without anchorplates............................................................

35

kgBarbed tape.................................................45 kg

Ladders7/......................................................60 No.Paint roller frames (other than of iron orsteel wire).....................................................

75No.

Metal handles for brooms, mops, paintapplicators and similar products...............

76No.

Burial caskets..............................................77 No.

Other33/.........................................................88 kg

Rates of Duty1


XV73-42

1/ See 9903.88.15.2/ See U.S. note 16 to subchapter III, chapter 99.3/ See 9903.88.03.4/ See 9903.88.16.5/ See 9903.88.51.6/ See 9903.88.45.7/ See 9903.88.35.8/ See 9903.88.46.9/ See 9903.88.02.10/ See 9903.88.43 and 9903.88.56.11/ See 9903.88.37 and 9903.88.56.12/ See 9903.88.48 and 9903.88.56.13/ See 9903.88.17 and 9903.88.59.14/ See 9903.88.17 and 9903.88.20.15/ See 9903.88.43.16/ See 9903.88.43 and 9903.88.48.17/ See 9903.88.48.18/ See 9903.88.18.19/ See 9903.88.33 and 9903.88.56.20/ See 9903.88.37.21/ See 9902.14.94 and 9903.88.03.22/ See 9903.88.38.23/ See 9903.88.33.24/ See 9902.14.95 and 9903.88.03.25/ See 9903.88.40, 9903.88.48 and 9903.88.56.26/ See 9903.88.18 and 9903.88.56.27/ See 9902.14.96, 9902.14.97 and 9903.88.16.28/ See 9902.14.98, 9902.14.99, 9902.15.01 and 9903.88.03.29/ See 9903.88.36.30/ See 9903.88.13, 9903.88.37, 9903.88.43 and 9903.88.46.31/ See 9903.88.34 and 9903.88.43.32/ See 9902.15.02, 9902.15.03, 9902.15.04, 9902.15.05, 9902.15.06 and 9903.88.03.33/ See 9903.88.33, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48 and 9903.88.56.


XVEndnotes--page 73 - 43

Date post:	21-Mar-2022
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

Chapter 73 | HTS

Documents