Chromatography Vials and Accessories · 2016. 7. 8. · 4100P-1232 401-531 4025BS-629 4025PBS-631...

USA3600 Reilly CourtVineland, New Jersey 08360-1506 USAToll Free: (800) 552-3696Tel: (856) 696-3605Fax: (856) 696-9002E-mail: [email protected]

EuropeUnit D14, Barwell Business ParkLeatherhead Road, Chessington SurreyKT9 2NY United KingdomTel: 44-(0) 208-397-9512Fax: 44-(0) 208-397-5705E-mail: [email protected]

ISO9002

CERTIFIED

Chromatography Vials and Accessories

Design, Engineering and Manufacturing

www.jgfinneran.com

2

While many companies are introducing automated sample handlingdevices to break the sample preparation “log jam” in today’slaboratories, J.G. Finneran Associates is solely concerned with thesample vial itself.

Laboratory technicians are familiar with sample vials. Autosamplersprovide the interface between sample and instrumentation, but the vialstill needs to be filled, measured, sealed and loaded. Depending on thenumber of samples required, these repetitive tasks which are performedby hand can often be tedious. J.G. Finneran Associates is familiar withthese tasks and, working with this knowledge, invents unique vials andcaps that enhance productivity in the lab while making samplehandling safer as well. The company designs, engineers andmanufactures glass and plastic vials and accessories specifically forlaboratory use. Most Finneran designs are unique, many are patented.

J.G. Finneran Associates, Inc. was founded in 1977 by Jerry and JoFinneran. In 1985, Jerry, a mechanical engineer, invented a microsample vial combining a plastic outer shell and a glass limited volumeinsert. This design combined what was then considered “traditionallyincompatible materials” - glass and plastic - to create an economical vialcapable of holding limited sample volumes. Today, their companycontinues to create unique sample vials and accessories.

ISO Certification

J.G. Finneran Associates has attained ISO-9002 compliance formanufacturing and distribution of their products, as accredited in theUnited States by the Registrar Accreditation Board (RAB), and inEurope by the Raad voor Accreditatie (RvA).

Contact J.G. Finneran Associates

J.G. Finneran Associates services customers worldwide.

Chromatography sample vialsand accessories

USA Europe

3600 Reilly Court Unit D14, Barwell Business ParkVineland Leatherhead Road, Chessington SurreyNew Jersey 08360-1506 USA KT9 2NY United KingdomToll Free: (800) 552-3696Tel: (856) 696-3605 Tel: 44-(0) 208-397-9512Fax: (856) 696-9002 Fax: 44-(0) 208-397-5705E-mail: [email protected] E-mail: [email protected]

www.jgfinneran.com

Customers may purchase J.G. Finneran Associates’ products from more than75 national, regional, and international distributors. Ask your laboratory suppliesdealer if they carry sample vials and accessories from J.G. Finneran Associates. Ifthey do not, call 1-800-552-3696 to find a dealer who does.

Designed, engineered andmanufactured by

• 100 �L Glass/Plastic LVV with8 mm Thread and 11 mm SnapRing™ Finish

1985• 100 �L Polypropylene LVV

with 8 mm Thread and 11 mmSnap Ring™ Finish

1986• Limited Volume Inserts with

Bottom Springs

1989• 2.0 mL Big Mouth Vials with

11 mm Crimp Finish

• 11 mm Snap Top Caps™ andPolypropylene Snap TopCaps™ for GC Testing

• Patented Top Hat™ ClosureAssembly for 8 mm, 13 mmand 24 mm Finish

1990• Limited Volume Inserts with

Patented Top Springs™

• Top Seal™ Closures for 8 mm,10 mm, and 13 mm Finish

1991• StepVial with Step Inserts

1992• 2.0 mL Big Mouth Vials with

11 mm Snap Ring™ Finish

3

1994• 8 mm PE Snap Plug Lined

with Silicone

• 11 mm and 13 mm Snap TopCaps™ for ShimadzuAutosamplers

1996• Graduated Marking Spots for

all Sample Vials

• 8 mm, 12 mm and 15 mmStarburst Conical Snap Plugs

• Patented Poly Crimp™ Sealwith 11 mm and 20 mm Finish

1995• Patented 2.0 mL and 4.0 mL

Snap Seal™ Vials

• Snap Racks™ for 8 mm and12 mm vials

• Scallop Packs™ andConvenience Packs

1997• 8 mm Snap Top Caps™

Table of ContentsPage Item

6 . . . . . Snap Seal™ Vials - Patented (12 x 32 mm)

9 . . . . . 11 mm Poly Crimp™ Seal - Patented

10 . . . . . Big Mouth Crimp Top Vials (12 x 32 mm)

13 . . . . . Snap Ring™ / Crimp Top Vials (12 x 32 mm)

16 . . . . . Standard Opening Crimp Top Vials (12 x 32 mm)

18 . . . . . Standard Opening Screw Thread Vials (12 x 32 mm)

21 . . . . . Large Opening R.A.M.™ Vials (12 x 32 mm)

24 . . . . . Big Mouth Screw Thread Vials (12 x 32 mm)

26 . . . . . Shell Vials (12 x 32 mm)

28 . . . . . WISP™ Style Snap Seal™ Vials (15 x 45 mm) - Patented

30 . . . . . WISP™ Style Screw Thread Vials (15 x 45 mm)

32 . . . . . Shell Vials (15 x 45 mm)

33 . . . . . Shell Vials for Waters WISP™ 96 Position Autosampler (8 x 40 mm)

35 . . . . . Specialty Autosampler Vials and Accessories

36 . . . . . Headspace Vials and Accessories

37 . . . . . Injection Port Septa

38 . . . . . Disposable Vials and O-Ring Caps

38 . . . . . Ampules

38 . . . . . 96-Well Multi-Tier™ MTP System - Patented

39 . . . . . Vial Racks

39 . . . . . Capsule Holders™ - Patented

39 . . . . . Dropper Assemblies

40 . . . . . Technical Information

42 . . . . . Numerical Index

J.G. Finneran Associates, Inc. corporate headquarters in Vineland N.J. USA

2000• Patented 96-Well Multi-Tier™

Microtitier Plate System

4 Chromatography Products Profile – Vial Sizer Chart

34013-154534013-1545A34013E-154534013E-1545A

33813-154533813-1545A33813E-154533813E-1545A

32010-123232010-1232A32010E-123232010E-1232A

32008-123232008-1232A32008E-123232008E-1232A

30111P-123230111G-123230111G-1232A

30108G-123230108G-1232A

31811-123231811-1232A31811E-123231811E-1232A

30708-74030708-740A

30711T-1232

32011S-123232011S-1232A32011SE-12323211SE-1232A

30511P-123230111F-1232 30711P-1232 31511SS-123231511-1232

30308-632 30808-83030808-830A

31108-1232 31509-1232

30313TG-1545

32009-123232009-1232A32009E-123232009E-1232A

33113-1545

30710P-123230510P-1232

32011-123232011-1232A32011E-123232011E-1232A

32513P-154531213P-1545

32011L-123232011L-1232A32011LE-12323211LE-1232A

Actual Size

5

4025GF-6314025PF-631

4100-840 4100-840A4100P-840

401BS-530401PBS-530

402BS-536

4100-1545 4100-1545A4100P-1545

401TS-529401PTS-529

4107P-840

403BS-638X403PBS-638

4130P-15454100-12324100-1232A4100P-1232

401-531

4025BS-6294025PBS-631

4025-531

4035-630

403TS-639403PTS-639

4025GF-827

405-843

310020-2346 320020-2375 310020A-2346 320020A-2375

Headspace VialsStandard FinishFlat Bottom

Headspace VialsEuropean FinishRound Bottom

The new Snap SealTM HighRecovery Vial features a precisionformed conical bottom.

A crimp capconstructed of plasticthat fits virtually anycrimp top sample vial.Refer to page 9 for acomplete listing ofPoly CrimpTM Seals.

6

Simplify your choices of putting a cap together with a vial. The Snap SealTM Vial (patented) can be securelysealed with the new patented Poly CrimpTM Seal, an aluminum crimp seal or a variety of Snap Top CapTM

designs.Seals tightly - the Snap SealTM Vial’s unique design provides for a secure seal with any thickness septa.Crimps tightly - the Snap SealTM Vial’s neck finish provides a tighter seal when using the new Poly CrimpTM

Seal, Snap Top CapTM or an aluminum seal.Less breakage - the Snap SealTM Vial has more glass in the neck area, so breakage of the neck duringdecapping is minimized.Autosampler compatible - the Snap SealTM Vial incorporates the unique StepVial design that precisely centersa limited volume insert in the vial neck. This assures dependable, reliable use with autosamplers - evenautosamplers with robotic arms.

The Snap SealTM Vial is designed, engineered and manufactured in compliance with ISO-9002 guidelines by J.G. FinneranAssociates. Although the Snap SealTM Vial can work with many standard caps and seals, the tighter manufacturing tolerances andquality assurance programs at J.G. Finneran assure better performance when Finneran caps are used with Finneran vials.

Choose from clear or amberType I borosilicate glass.Available with graduatedmarking spots whichprovides the ability to fill asample vial to a desiredlevel and facilitates viewingsample volumes. Spot canbe written on with a #2pencil.

Snap SealTM Vials - Patented

Shelf Pack – 100 pieces; Case Pack – 1000 pieces

Cat. No. Description

31811-1232 Clear Vial31811-1232A Amber Vial

31811M-1232 Clear Vial, White Marking Spot31811M-1232A Amber Vial, White Marking Spot

31811E-1232 Clear Vial, White Graduation Spot31811E-12B Clear Vial, Blue Graduation Spot31811E-12G Clear Vial, Green Graduation Spot31811E-12R Clear Vial, Rust Graduation Spot31811E-12Y Clear Vial, Yellow Graduation Spot

31811E-1232A Amber Vial, White Graduation Spot31811E-12AB Amber Vial, Blue Graduation Spot31811E-12AG Amber Vial, Green Graduation Spot31811E-12AR Amber Vial, Rust Graduation Spot31811E-12AY Amber Vial, Yellow Graduation Spot

Limited Volume Snap SealTM VialsCat. No. Description

30111F-1232 0.100 mL Patented Snap SealTM Micro Vial (12 per pack)31511SS-1232 1.5 mL Clear Snap SealTM High Recovery Glass Vial (100 per pack)

Poly Crimp™ Seals (11 mm) - PatentedShelf Pack – 100 pieces; Case Pack – 1000 pieces


5500-11 Clear Seal, Molded Septa5500SB-11 Clear Seal, Molded Starburst Septa5510-11 Clear Seal, 10 mil PTFE 5540-11 Clear Seal, PTFE/Red Rubber5550-11 Clear Seal, PTFE/Silicone 5560-11 Clear Seal, PTFE/Silicone/PTFE 5570-11 Clear Seal, PTFE/Silicone w/Slit 5581-11 Clear Seal, PTFE/Silicone w/Starburst

Snap Top Caps™ (11 mm)

Vials

Closures

J.G. Finneran Associates, Inc. – Design, Engineer ing and Manufactur ing • 1-800-552-3696 • 1-856-696-3605

Snap SealTM Vials (Step) (2.0 mL volume, 11 mm seal, 12 mm diameter x 32 mm height) - Patented

Inserts are availablepreassembled with a polymerbottom spring or patentedTop SpringTM. The polymerspring acts as a shockabsorber that protects againstbreakage if the needlebottoms out. The conicaldesign permits completesample removal. The Step

Insert precisely sits in the neck of the vial, thuseliminating the need for metal or plastic springs.

Caps may be snappedon and off by handwhich eliminates theneed for metalcrimping anddecapping tools, thusreducing potential

hazards due to sharp aluminum metal edges. Largeopening top provides greater target area for needlepenetration. Refer to page 14 for a complete list ofSnap Top CapsTM.

Larger openingprovidesincreased targetarea for needlepenetration.Available in avariety of colorsfor easy sample

identification. Refer to page 11 for a completelisting of Aluminum Seals.

7

Accessoriesfor 11 mm Crimp Style Vials

Inserts (Glass)Case Pack – 100 pieces


4005BS-625 0.050 mL Insert, Bottom Spring401TS-529 0.100 mL Insert, Patented Top SpringTM

4025-629 0.250 mL Insert, No Spring4025BS-629 0.250 mL Insert, Bottom Spring 4025GF-631 0.250 mL Step Insert, Glass Flange 4035-630 0.350 mL Flat Bottom Insert

Inserts (Polypropylene)Case Pack – 100 pieces


401PTS-530 0.100 mL Insert, Patented Top SpringTM

4025PBS-631 0.250 mL Insert, Bottom Spring 4025PF-631 0.250 mL Step Insert, Polypropylene Flange 4025P-631 0.250 mL Insert, No Spring

Snap Racks™Case Pack – 5 pieces


9700-12 50 Position White Rack for 12 mm Vials9700-12B 50 Position Blue Rack for 12 mm Vials

Inserts


Closures(continued)



5200-11 Clear Cap, Molded Septa5200SB-11 Clear Cap, Molded Starburst Septa5210-11 Clear Cap, 10 mil PTFE5240-11 Clear Cap, PTFE/Red Rubber 5250-11 Clear Cap, PTFE/Silicone 5260-11 Clear Cap, PTFE/Silicone/PTFE

5240-11PP Clear Polypropylene Cap, PTFE/Red Rubber 5250-11PP Clear Polypropylene Cap, PTFE/Silicone 5260-11PP Clear Polypropylene Cap, PTFE/Silicone/PTFE

Snap Top CapsTM for Shimadzu Autosamplers (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5610-11 Clear Cap, 10 mil PTFE5640-11 Clear Cap, PTFE/Red Rubber 5650-11 Clear Cap, PTFE/Silicone5660-11 Clear Cap, PTFE/Silicone/PTFE

Aluminum Seals (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5110-11 Silver Seal, 10 mil PTFE 5120-11 Silver Seal, 10 mil Polypropylene 5140-11 Silver Seal, PTFE/Red Rubber 5150-11 Silver Seal, PTFE/Silicone 5160-11 Silver Seal, PTFE/Silicone/PTFE 5170-11 Silver Seal, PTFE/Silicone Slit5190-11 Silver Seal, Viton®

Snap Top CapsTM (11mm)

Componentspackaged in a clearlid tray. Fits intobench drawer foreasy access, andpackaging keepsproducts visibleand particle free.

Snap RacksTM areconstructed of durableglass reinforcedpolypropylene, with acenter well toconveniently hold caps,seals, septa, etc. Racks

snap together securely to double your rack capacity.

8

*Any combination of vial, cap/seal, and septa is available. Please call.

Universal Vial Rack System - Rack & Trays Available SeparatelyCase Pack – 5 pieces


9600-01 Universal Rack9601-12 25 Position Insert Tray for 12 mm Vials

Crimpers/Decappers for 11 mm Crimp VialsSold individually


9300-11 Hand Operated Crimper9310-11 Plier Style Decapper9320-11 Hand Operated Decapper

Convenience Packs with Poly Crimp™ Seals (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


918551-12 Clear Vial, 10 mil PTFE 918554-12 Clear Vial, PTFE/Red Rubber918555-12 Clear Vial, PTFE/Silicone 918556-12 Clear Vial, PTFE/Silicone/PTFE

918551-12A Amber Vial, 10 mil PTFE 918554-12A Amber Vial, PTFE/Red Rubber918555-12A Amber Vial, PTFE/Silicone918556-12A Amber Vial, PTFE/Silicone/PTFE

Convenience Packs with Snap Top Caps™ (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


918521-12 Clear Vial, 10 mil PTFE 918524-12 Clear Vial, PTFE/Red Rubber918525-12 Clear Vial, PTFE/Silicone918526-12 Clear Vial, PTFE/Silicone/PTFE


Convenience Packs with Polypropylene Snap Top Caps™ (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


918521P-12 Clear Vial, 10 mil PTFE918524P-12 Clear Vial, PTFE/Red Rubber 918525P-12 Clear Vial, PTFE/Silicone918526P-12 Clear Vial, PTFE/Silicone/PTFE

918521P-12A Amber Vial, 10 mil PTFE918524P-12A Amber Vial, PTFE/Red Rubber918525P-12A Amber Vial, PTFE/Silicone918526P-12A Amber Vial, PTFE/Silicone/PTFE

Convenience Packs with Aluminum Seals (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


918511-12 Clear Vial, 10 mil PTFE 918514-12 Clear Vial, PTFE/Red Rubber918515-12 Clear Vial, PTFE/Silicone918516-12 Clear Vial, PTFE/Silicone/PTFE

Convenience Packs*for 2.0 mL Snap SealTM Vials

Accessories(continued)


A crimp cap constructed of plastic that fits virtually any crimp sample vial. Use a standard crimping tool to securely crimp the PolyCrimpTM Seal (patented) onto any crimp top vial...it’s that easy! And, this cap is versatile: the Poly CrimpTM Seal permits an airtightseal by hand, without crimping. It is the best thing since the autosampler.

No more sharp metal edges from an aluminum crimp cap - the Poly CrimpTM Seal will not cutyou, it’s plastic. Stop breaking vials during crimping or decapping - the Poly CrimpTM Seal crimps and decapssmoothly and easily. Eliminate inconsistent sealing with improper crimping technique - the Poly CrimpTM Seal alignsitself on the vial neck. Stop looking for septa that fell out of the cap - Poly CrimpTM Seal is designed to hold the septafirmly in place.

The Poly CrimpTM Seal is designed, engineered, and manufactured in compliance with ISO-9002 guidelines by J.G. FinneranAssociates. Although the Poly CrimpTM Seal can work with any crimp top vial, the tighter manufacturing tolerances and qualityassurance programs at Finneran assure better performance when the cap is used with Finneran vials.

Poly CrimpTM Seals - Patented

Poly CrimpTM Seals (11 mm) - PatentedShelf Pack – 100 pieces; Case Pack – 1000 pieces


5500-11 Clear Seal, molded septa5500-11R Red Seal, molded septa5500-11B Blue Seal, molded septa5500-11G Green Seal, molded septa5500-11Y Yellow Seal, molded septa

5500SB-11 Clear Seal, molded starburst septa5500SB-11R Red Seal, molded starburst septa5500SB-11B Blue Seal, molded starburst septa5500SB-11G Green Seal, molded starburst septa5500SB-11Y Yellow Seal, molded starburst septa

5510-11 Clear Seal, 10 mil PTFE5510-11R Red Seal, 10 mil PTFE5510-11B Blue Seal, 10 mil PTFE5510-11G Green Seal, 10 mil PTFE5510-11Y Yellow Seal, 10 mil PTFE

5540-11 Clear Seal, PTFE/Red Rubber5540-11R Red Seal, PTFE/Red Rubber5540-11B Blue Seal, PTFE/Red Rubber5540-11G Green Seal, PTFE/Red Rubber5540-11Y Yellow Seal, PTFE/Red Rubber

5550-11 Clear Seal, PTFE/Silicone5550-11R Red Seal, PTFE/Silicone5550-11B Blue Seal, PTFE/Silicone5550-11G Green Seal, PTFE/Silicone5550-11Y Yellow Seal, PTFE/Silicone

Seals


Convenience Packs with Aluminum Seals (11 mm) (continued)Shelf Pack – 100 pieces; Case Pack – 1000 pieces



Convenience Packs(continued)

9

10



32011L-1232 Clear Vial32011L-1232A Amber Vial

32011LM-1232 Clear Vial, White Marking Spot3211LM-1232A Amber Vial, White Marking Spot

32011LE-1232 Clear Vial, White Graduation Spot32011LE-12B Clear Vial, Blue Graduation Spot32011LE-12G Clear Vial, Green Graduation Spot32011LE-12R Clear Vial, Rust Graduation Spot32011LE-12Y Clear Vial, Yellow Graduation Spot

3211LE-1232A Amber Vial, White Graduation Spot3211LE-12AB Amber Vial, Blue Graduation Spot3211LE-12AG Amber Vial, Green Graduation Spot3211LE-12AR Amber Vial, Rust Graduation Spot3211LE-12AY Amber Vial, Yellow Graduation Spot

Limited Volume Crimp Style Vials

Solid Ring Vials – Use with 11 mm Poly CrimpTM Seals or Aluminum SealsCat. No. Description

30111-1232 0.100 mL Solid Glass Vial (12 per pack)31511-1232 1.5 mL Clear Big Mouth High Recovery Glass Vial (100 per pack)

Round Bottom Vials – Use with 11 mm Poly CrimpTM Seals or AluminumSeals


31711-1232 1.7 mL Clear Vial (100 per pack)

Vials

Big Mouth Crimp Top Vials

Vials (2.0 mL volume, 12 mm diameter x 32 mm height)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


31811-1232 Clear Snap Seal™ Vial32011-1232 Clear Standard Crimp Vial32011L-1232 Clear Big Mouth Crimp Vial32011S-1232 Clear Snap Ring™/Crimp Vial

VialsCompatible with Poly CrimpTM Seals

Poly CrimpTM Seals (11 mm) - Patented (continued)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5560-11 Clear Seal, PTFE/Silicone/PTFE5560-11R Red Seal, PTFE/Silicone/PTFE5560-11B Blue Seal, PTFE/Silicone/PTFE5560-11G Green Seal, PTFE/Silicone/PTFE5560-11Y Yellow Seal, PTFE/Silicone/PTFE

5570-11 Clear Seal, PTFE/Silicone, Slit5581-11 Clear Seal, PTFE/Silicone, Starburst

Seals(continued)

Big Mouth Crimp Top Vials (Step) (2.0 mL volume, 11 mm seal, 12 mm diameter x 32 mm height)


The new Big Mouth HighRecovery Vial features a precisionformed conical bottom.

40% larger opening preventsbroken needles due to increasedtarget area. Neck finish allowsuse of patented Poly CrimpTM

Seals or standard aluminumseals. Designed to work inHewlett-Packard and otherautosamplers. Choose fromclear or amber Type Iborosilicate glass. Vial

incorporates the unique StepVial design thatprecisely centers a limited volume insert in the vialneck. Available with graduated marking spotswhich can be written on with a #2 pencil.

11

Closures


Larger openingprovides increasedtarget area forneedlepenetration.Available in avariety of colorsfor easy sampleidentification.

A crimp capconstructed of plasticthat fits virtually anycrimp top samplevial.



5110-11 Silver Seal, 10 mil PTFE5120-11 Silver Seal, 10 mil Polypropylene

5140-11 Silver Seal, PTFE/Red Rubber5140-11B Blue Seal, PTFE/Red Rubber5140-11G Green Seal, PTFE/Red Rubber5140-11R Red Seal, PTFE/Red Rubber5140-11Y Yellow Seal, PTFE/Red Rubber

5150-11 Silver Seal, PTFE/Silicone5150-11B Blue Seal, PTFE/Silicone5150-11G Green Seal, PTFE/Silicone5150-11R Red Seal, PTFE/Silicone5150-11Y Yellow Seal, PTFE/Silicone

5160-11 Silver Seal, PTFE/Silicone/PTFE5160-11B Blue Seal, PTFE/Silicone/PTFE 5160-11G Green Seal, PTFE/Silicone/PTFE5160-11R Red Seal, PTFE/Silicone/PTFE5160-11Y Yellow Seal, PTFE/Silicone/PTFE

5170-11 Silver Seal, PTFE/Silicone, Slit5190-11 Silver Seal, Viton®



5500-11 Clear Seal, molded septa5500-11R Red Seal, molded septa5500-11B Blue Seal, molded septa5500-11G Green Seal, molded septa5500-11Y Yellow Seal, molded septa

5500SB-11 Clear Seal, molded starburst septa5500SB-11R Red Seal, molded starburst septa5500SB-11B Blue Seal, molded starburst septa5500SB-11G Green Seal, molded starburst septa5500SB-11Y Yellow Seal, molded starburst septa

5510-11 Clear Seal, 10 mil PTFE5510-11R Red Seal, 10 mil PTFE5510-11B Blue Seal, 10 mil PTFE5510-11G Green Seal, 10 mil PTFE5510-11Y Yellow Seal, 10 mil PTFE

5540-11 Clear Seal, PTFE/Red Rubber5540-11R Red Seal, PTFE/Red Rubber5540-11B Blue Seal, PTFE/Red Rubber5540-11G Green Seal, PTFE/Red Rubber5540-11Y Yellow Seal, PTFE/Red Rubber5550-11 Clear Seal, PTFE/Silicone5550-11R Red Seal, PTFE/Silicone5550-11B Blue Seal, PTFE/Silicone5550-11G Green Seal, PTFE/Silicone5550-11Y Yellow Seal, PTFE/Silicone

5560-11 Clear Seal, PTFE/Silicone/PTFE5560-11R Red Seal, PTFE/Silicone/PTFE5560-11B Blue Seal, PTFE/Silicone/PTFE5560-11G Green Seal, PTFE/Silicone/PTFE5560-11Y Yellow Seal, PTFE/Silicone/PTFE

5570-11 Clear Seal, PTFE/Silicone, Slit5581-11 Clear Seal, PTFE/Silicone, Starburst

12




4025-629 0.250 mL Insert, No Spring4025BS-629 0.250 mL Insert, Bottom Spring4025GF-631 0.250 mL Step Insert, Glass Flange4035-630 0.350 mL Flat Bottom Insert




4025PBS-631 0.250 mL Insert, Bottom Spring4025PF-631 0.250 mL Step Insert, Polypropylene Flange4025P-631 0.250 mL Insert, No Spring












920511L-12 Clear Vial, 10 mil FE/Red Rubber920514L-12 Clear Vial, PTFE/Red Rubber920515L-12 Clear Vial, PTFE/Silicone920516L-12 Clear Vial, PTFE/Silicone/PTFE

920511L-12A Amber Vial, 10 mil PTFE920514L-12A Amber Vial, PTFE/Red Rubber 920515L-12A Amber Vial, PTFE/Silicone920516L-12A Amber Vial, PTFE/Silicone/PTFE

Inserts

Accessories for 11 mm Crimp Style Vials

Convenience Packs*for 2.0 mL Big Mouth Vials


Inserts are availablepreassembled with a polymerbottom spring or patented TopSpringTM. The polymer springacts as a shock absorber thatprotects against breakage if theneedle bottoms out. The conicaldesign permits complete sampleremoval. The Step Insertprecisely sits in the neck of thevial, thus eliminating the needfor metal or plastic springs.

Snap RacksTM areconstructed of durableglass reinforcedpolypropylene, with acenter well toconveniently holdcaps, seals, septa, etc.Racks snap together

securely to double your rack capacity.

Componentspackaged in a clearlid tray. Fits intobench drawer foreasy access andpackaging keepsproducts visible andparticle free.

*Any combination of vial, cap/seal, and liner is available. Please call.

13

Convenience Packs with Poly Crimp™ Seals (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


920551L-12 Clear Vial, 10 mil PTFE920554L-12 Clear Vial, PTFE/Red Rubber 920555L-12 Clear Vial, PTFE/Silicone920556L-12 Clear Vial, PTFE/Silicone/PTFE

920551L-12A Amber Vial, 10 mil PTFE920554L-12A Amber Vial, PTFE/Red Rubber920555L-12A Amber Vial, PTFE/Silicone920556L-12A Amber Vial, PTFE/Silicone/PTFE

Convenience Packs(continued)for 2.0 mL Big Mouth Vials



32011S-1232 Clear Vial32011S-1232A Amber Vial

32011SM-1232 Clear Vial, White Marking Spot3211SM-1232A Amber Vial, White Marking Spot

32011SE-1232 Clear Vial, White Graduation Spot32011SE-12B Clear Vial, Blue Graduation Spot32011SE-12G Clear Vial, Green Graduation Spot32011SE-12R Clear Vial, Rust Graduation Spot32011SE-12Y Clear Vial, Yellow Graduation Spot

3211SE-1232A Amber Vial, White Graduation Spot3211SE-12AB Amber Vial, Blue Graduation Spot3211SE-12AG Amber Vial, Green Graduation Spot3211SE-12AR Amber Vial, Rust Graduation Spot3211SE-12AY Amber Vial, Yellow Graduation Spot

Limited Volume Snap RingTM/Crimp Top Vials

Glass Insert/Plastic Outside Vial – Use with 11mm Snap Top CapsTM, PolyCrimpTM Seals or Aluminum Seals

Case Pack – 100 pieces


30111G-1232 0.100 mL Glass Insert/Clear Plastic Outside Vial30111G-1232A 0.100 mL Glass Insert/Amber Plastic Outside Vial

Solid Snap Ring Vials – Use with 11 mm Snap Top CapsTM, Poly CrimpTM

Seals or Aluminum SealsCat. No. Description

30111K-1232 0.100 mL EkonicalTM Glass Vial (100 per pack)30111S-1232 0.100 mL Solid Glass Vial (12 per pack)

Snap RingTM/Crimp Top Vials

Vials


Neck finish allows use of SnapTop CapsTM, patented PolyCrimpTM Seals or standardaluminum seals. Snap RingTM

finish eliminates the need forcrimping or decapping.Designed to work in Hewlett-Packard and other autosamplers.Choose from clear or amberType I borosilicate glass. Vialincorporates the unique StepVial

design that precisely centers a limited volume insert inthe vial neck. Available with graduated marking spotswhich can be written on with a #2 pencil.

Snap RingTM/Crimp Top Vials (Step) (2.0 mL volume, 11 mm seal, 12 mm diameter x 32 mm height)

J.G. Finneran is the originaldesigner and manufacturer ofthe Glass Insert/Plastic OutsideVials (Glastic) and the 0.100 mLPolypropylene Vial. Glastic is aunique combination of Type Ilow extractable borosilicate glassinsert and a clear or amberthermoplastic polymer outer vial

shell. The glass is the only contact between thesample and the seal.

14

Vials(continued) Limited Volume Snap RingTM/Crimp Top Vials (continued)

Plastic Vials – Use with 11 mm Snap Top CapsTM, Poly CrimpTM Seals orAluminum Seals



30111P-1232 0.100 mL Polypropylene Vial30111T-1232 0.100 mL Polymethylpentene (TPX) Vial30511P-1232 0.500 mL Polypropylene Vial30511T-1232 0.500 mL Polymethylpentene (TPX) Vial30711P-1232 0.750 mL Polypropylene Vial30711T-1232 0.750 mL Polymethylpentene (TPX) Vial

ClosuresSnap Top Caps™ (11 mm)



5200-11 Clear Cap, molded septa

5200SB-11 Clear Cap, molded starburst septa5200SB-11R Red Cap, molded starburst septa5200SB-11B Blue Cap, molded starburst septa5200SB-11G Green Cap, molded starburst septa5200SB-11Y Yellow Cap, molded starburst septa

5210-11 Clear Cap, 10 mil PTFE5210-11R Red Cap, 10 mil PTFE5210-11B Blue Cap, 10 mil PTFE5210-11G Green Cap, 10 mil PTFE5210-11Y Yellow Cap, 10 mil PTFE

5240-11 Clear Cap, PTFE/Red Rubber5240-11R Red Cap, PTFE/Red Rubber5240-11B Blue Cap, PTFE/Red Rubber5240-11G Green Cap, PTFE/Red Rubber5240-11Y Yellow Cap, PTFE/Red Rubber

5250-11 Clear Cap, PTFE/Silicone5250-11R Red Cap, PTFE/Silicone5250-11B Blue Cap, PTFE/Silicone5250-11G Green Cap, PTFE/Silicone5250-11Y Yellow Cap, PTFE/Silicone

5260-11 Clear Cap, PTFE/Silicone/PTFE5260-11R Red Cap, PTFE/Silicone/PTFE5260-11B Blue Cap, PTFE/Silicone/PTFE5260-11G Green Cap, PTFE/Silicone/PTFE5260-11Y Yellow Cap, PTFE/Silicone/PTFE

5270-11 Clear Cap, PTFE/Silicone, Slit5275-11 Clear Cap, PTFE/Silicone, Cross Slit5280-11 Clear Cap, PTFE/Silicone/PTFE, Starburst5281-11 Clear Cap, PTFE/Silicone, Starburst5282-11 Clear Cap, 10mil PTFE, Starburst5283-11 Clear Cap, Viton®, Starburst5290-11 Clear Cap, Viton®

Polypropylene GC Snap Top Caps™ (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5240-11PP Clear Cap, PTFE/Red Rubber5250-11PP Clear Cap, PTFE/Silicone5260-11PP Clear Cap, PTFE/Silicone/PTFE


Caps may be snappedon and off by handwhich eliminates theneed for metal crimpingand decapping tools,thus reducing potentialhazards due to sharpaluminum metal edges.

Large opening top provides a greater target area forneedle penetration. Linerless Snap Top CapsTM areavailable with or without starburst. Starburst allowsfor easy needle penetration. Snap Caps are colorcoded for easy sample identification. Caps can also beused on 12x32 mm Snap SealTM vials.

GC Snap Top CapsTM

were developed tohandle the mostvolatile samples,providing a liquidairtight seal to the vial.Simply snap on the capand an evaporation-

proof seal of a crimp cap is achieved. Caps can also beused on 12x32 mm Snap SealTM vials.

Polypropylene 0.100 mL Vial Polymethylpentene (TPX)0.500 and 0.100 mL Vials

15

Snap Top Caps™ for Shimadzu Autosamplers (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5610-11 Clear Cap, 10 mil PTFE5640-11 Clear Cap, PTFE/Red Rubber5650-11 Clear Cap, PTFE/Silicone5660-11 Clear Cap, PTFE/Silicone/PTFE



5110-11 Silver Seal, 10 mil PTFE5120-11 Silver Seal, 10 mil Polypropylene5140-11 Silver Seal, PTFE/Red Rubber5150-11 Silver Seal, PTFE/Silicone5160-11 Silver Seal, PTFE/Silicone/PTFE5170-11 Silver Seal, PTFE/Silicone, Slit5190-11 Silver Seal, Viton®

Poly Crimp™ Seals (11 mm) - PatentedShelf Pack – 100 pieces; Case Pack – 1000 pieces


5500-11 Clear Seal, molded septa5500SB-11 Clear Seal, molded starburst septa5510-11 Clear Seal, 10 mil PTFE5540-11 Clear Seal, PTFE/Red Rubber5550-11 Clear Seal, PTFE/Silicone5560-11 Clear Seal, PTFE/Silicone/PTFE5570-11 Clear Seal, PTFE/Silicone, Slit5581-11 Clear Seal, PTFE/Silicone, Starburst









Inserts


Snap Caps designed forShimadzu autosamplers,simplify handling byeliminating the need forthreaded closures. Capprovides a tight seal, thuseliminating the varying

degrees of torque applied when using screw threadclosures. This unique design eliminates the possibilityof vials cocking in the autosampler trays. 11 mm capcan also be used on 12x32 mm Snap SealTM vials.

Larger opening providesincreased target area forneedle penetration.Available in a variety ofcolors for easy sampleidentification. Refer to

page 11 for a complete listing of Aluminum Seals.

A crimp capconstructed of plasticthat fits virtually anycrimp top sample vial.Refer to page 9 for acomplete listing of PolyCrimpTM Seals.

Inserts are availablepreassembled with apolymer bottom spring orpatented Top SpringTM. Thepolymer spring acts as ashock absorber that protectsagainst breakage if theneedle bottoms out. Theconical design permitscomplete sample removal.The Step Insert precisely sitsin the neck of the vial, thus

eliminating the need for metal or plastic springs.

Closures(continued)

16

Standard Opening Crimp Top Vials


Vials










Standard Opening Crimp Top Vials (2.0 mL volume, 11 mm seal, 12 mm diameter x 32 mm height)







Closures




Neck finish allows use ofpatented Poly CrimpTM Seals orstandard aluminum seals.Designed to work in Hewlett-Packard and otherautosamplers. Choose fromclear or amber Type Iborosilicate glass. Availablewith graduated marking spotswhich can be written on with a#2 pencil.

Larger openingprovides increasedtarget area forneedle penetration.Available in avariety of colors foreasy sampleidentification. Refer

to page 11 for a complete listing of Aluminum Seals.



5110-11 Silver Seal, 10 mil PTFE5120-11 Silver Seal, 10 mil Polypropylene5140-11 Silver Seal, PTFE/Red Rubber5150-11 Silver Seal, PTFE/Silicone5160-11 Silver Seal, PTFE/Silicone/PTFE5170-11 Silver Seal, PTFE/Silicone, Slit5190-11 Silver Seal, Viton®

17



5500-11 Clear Seal, molded septa5500SB-11 Clear Seal, molded starburst septa5510-11 Clear Seal, 10 mil PTFE5540-11 Clear Seal, PTFE/Red Rubber5550-11 Clear Seal, PTFE/Silicone5560-11 Clear Seal, PTFE/Silicone/PTFE5570-11 Clear Seal, PTFE/Silicone, Slit5581-11 Clear Seal, PTFE/Silicone, Starburst



4005BS-425 0.050 mL Insert, Bottom Spring401F-529 0.100 mL Insert, Plastic Flange401BS-530 0.100 mL Insert, Bottom Spring401-531 0.100 mL Insert, No Spring401-530 0.100 mL Insert, requires Metal Spring4025-531 0.250 mL Flat Bottom Insert4000-530 Metal Spring for 0.100 mL Insert

Inserts (Polypropylene)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


401PBS-530 0.100 mL Insert, Bottom Spring401P-530 0.100 mL Insert, No Spring

Snap RacksTM










Inserts

Closures(continued)


A crimp capconstructed of plasticthat fits virtually anycrimp top sample vial.Refer to page 9 for acomplete listing of PolyCrimpTM Seals.

Inserts are availablepreassembled with a polymerbottom spring. The polymerspring acts as a shockabsorber that protects againstbreakage if the needle bottomsout. The conical designpermits complete sampleremoval.


Snap RacksTM areconstructed of durableglass reinforcedpolypropylene, with acenter well toconveniently holdcaps, seals, septa, etc.

Racks snap together securely to double your rackcapacity.

18

Standard Opening Screw Thread Vials

Convenience Packs*for 2.0 mL Standard Opening Vials Convenience Packs with Aluminum Seals (11 mm)



920511-12 Clear Vial, 10 mil PTFE920514-12 Clear Vial, PTFE/Red Rubber920515-12 Clear Vial, PTFE/Silicone920516-12 Clear Vial, PTFE/Silicone/PTFE

920511-12A Amber Vial, 10 mil PTFE920514-12A Amber Vial, PTFE/Red Rubber920515-12A Amber Vial, PTFE/Silicone920516-12A Amber Vial, PTFE/Silicone/PTFE

Convenience Packs with Poly CrimpTM Seals (11 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces




VialsStandard Opening Screw Thread Vials (2.0 mL volume, 8-425 mm cap size, 12 mm diameter x 32 mm height)







Limited Volume Screw Thread Vials

Glass Insert/Plastic Outside Vial – Use with 8-425 mm ClosuresCase Pack – 100 pieces


30108G-1232 0.100 mL Glass Insert/Clear Plastic Outside Vial30108G-1232A 0.100 mL Glass Insert/Amber Plastic Outside Vial


Componentspackaged in a clearlid tray. Fits intobench drawer foreasy access andpackaging keepsproducts visibleand particle free.

Narrow opening allows use of8-425 mm closures and septa.Designed to work in a varietyof autosamplers requiringnarrow neck vials. Choosefrom clear or amber Type Iborosilicate glass. Availablewith graduated marking spotswhich can be written on with a#2 pencil.


19

Limited Volume Screw Thread Vials (continued)

Solid Screw Thread Vials – Use with 8-425 mm ClosuresCase Pack – 12 pieces


30108-1232 0.100 mL Solid Glass Vial

Plastic Vials – Use with 8-425 mm ClosuresShelf Pack – 100 pieces; Case Pack – 1000 pieces


30108P-1232 0.100 mL Polypropylene Vial30108T-1232 0.100 mL TPX Vial

Tapered Bottom Vials – Use with 8-425 mm ClosuresShelf Pack – 100 pieces; Case Pack – 1000 pieces


31108-1232 1.1 mL Clear Vial

Screw Thread Closures (8-425 mm cap size)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5310-08 Black, Polypropylene Large Open-Hole for Shimadzu

5310L-08 Black, Polypropylene Large Open-Hole5310-08R Red, Polypropylene Large Open-Hole5310-08B Blue, Polypropylene Large Open-Hole5310-08G Green, Polypropylene Large Open-Hole5310-08Y Yellow, Polypropylene Large Open-Hole5310-08W White, Polypropylene Large Open-Hole

5320-08 Solid Top, Black Polypropylene, Unlined5330-08 Top SealTM, Clear Polypropylene, molded 10mil septa5330-08W Top SealTM, White Polypropylene, molded 10mil septa5350-08 Solid Top, Black Polypropylene PTFE/Pulp Lined5360-08 Solid Top, Black Polypropylene PTFE/F217 Lined

Septa for Screw Thread Closures (8-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


601010-08 White PTFE Disk, 0.010” 601080-08 White PTFE Disk, Slit, 0.010”

603570-08 Red PTFE/Silicone, Slit, 0.035”604040-08 PTFE/Red Rubber, 0.040”

606070-08 Red PTFE/Silicone, Slit, 0.060” 604550-08 Red PTFE/Silicone, 0.045” 606550-08 Red PTFE/Silicone, 0.065” 606550B-08 Blue PTFE/Silicone, 0.065” 606550T-08 Tan PTFE/Silicone, 0.065” 607550-08 Red PTFE/Silicone, 0.075”

610050-08 PTFE/Silicone, 0.100”604060-08 Red PTFE/Silicone/Red PTFE, 0.040” 604075-08 Red PTFE/Silicone/Red PTFE, Slit, 0.040” 603090-08 Black Viton®, 0.030”

Closures

Vials(continued)

J.G. Finneran is the originaldesigner and manufacturer ofthe Glass Insert/PlasticOutside Vials (Glastic) and the0.100 mL Polypropylene Vial.Glastic is a uniquecombination of Type I lowextractable borosilicate glassinsert and a clear or amberthermoplastic polymer outer

vial shell. The glass is the only contact between thesample and the seal.


Available in a wideassortment of colors.Designed for usewith Shimadzu,Spectra-Physics,Varian and otherautosamplers. TheTop SealTM closure

with a 0.010" molded septa allows for easy needlepenetration and is inert to most solvents. The onepiece design saves time by eliminating the processof assembling liners in the closures.

Closures are in compliance with CONEG (Council of North East Governors) Standards,all colored closures and septa are Heavy Metals Free!

Refer to the SeptaSelection Guide onpage 41 to choose8 mm septa bestsuited for yourapplication.

Inserts

20

Preassembled Closure and Septa (8-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


806550TH-08 Black Top HatTM PTFE/Silicone Septa/Closure (Patented)806550TH-08Y Yellow Top HatTM PTFE/Silicone Septa/Closure (Patented)804060-08 Black Closure, PTFE/Silicone/PTFE, 0.040”806550-08 Black Closure, PTFE/Silicone, 0.065”



4005BS-425 0.050 mL Insert, Bottom Spring401F-529 0.100 mL Insert, Plastic Flange401BS-530 0.100 mL Insert, Bottom Spring401-531 0.100 mL Insert, No Spring401-530 0.100 mL Insert, requires Metal Spring4025-531 0.250 mL Flat Bottom Insert4000-530 Metal Spring for 0.100 mL Insert







Universal Vial Rack System - Rack & Trays Available SeparatelySold individually



Convenience Packs with Closures/Septa (8-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


90865L-12 Clear Vial, PTFE/Silicone 0.065”90865L-12A Amber Vial, PTFE/Silicone 0.065”

9084060-12 Clear Vial, PTFE/Silicone/PTFE 0.040”9084060-12A Amber Vial, PTFE/Silicone/PTFE 0.040”

98655TH-12 Clear Vial, Top HatTM, PTFE/Silicone98655TH-12A Amber Vial, Top HatTM, PTFE/Silicone

Accessories for 8 mm Screw Thread Vials

Convenience Packs*for 2.0 mL Standard OpeningScrew Thread Vials


Choose the preassembled capswith septa best suited for yourapplication. The patented TopHatTM septa and closure was

designed to provide a positive physical lock to assurethat preassembled components arrive intact.

Inserts are availablepreassembled with a polymerbottom spring. The polymerspring acts as a shockabsorber that protects againstbreakage if the needlebottoms out. The conicaldesign permits completesample removal.

Snap RacksTM areconstructed of durableglass reinforcedpolypropylene, with acenter well toconveniently holdcaps, seals, septa, etc.


Componentspackaged in aclear lid tray with100 vials and 100preassembledclosures andsepta. Closureswith septa arenot attached to

the vials and are in individual plastic bags. Fits intobench drawer for easy access and packaging keepsproducts visible and particle free.

Closures(continued)


21







Limited Volume R.A.M.TM VialsShelf Pack – 100 pieces; Case Pack – 1000 pieces


Glass Vials – Use with 9mm Closures31509-1232 1.5 mL R.A.M.TM High Recovery Glass Vial (100 per pack)

Plastic Vials – Use with 9mm Closures30109P-1232 0.100 mL Polypropylene Vial30109T-1232 0.100 mL TPX Vial30509P-1232 0.500 mL Polypropylene Vial

Vials

Large Opening R.A.M™ Vials

PreassembledConvenience Packs* for 2.0 mL Standard OpeningScrew Thread Vials


Preassembled Convenience Packs with Closures/Septa (8-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


801010-1232 Clear Vial, PTFE, 0.010”801010-1232A Amber Vial, PTFE, 0.010”

801080-1232 Clear Vial, PTFE, Slit, 0.010”

804040-1232 Clear Vial, PTFE/Red Rubber, 0.040”804040-1232A Amber Vial, PTFE/Red Rubber, 0.040”

804060-1232 Clear Vial, Red PTFE/Silicone/Red PTFE, 0.040”804060-1232A Amber Vial, Red PTFE/Silicone/Red PTFE, 0.040”

804550-1232 Clear Vial, Red PTFE/Silicone, 0.045”804550-1232A Amber Vial, Red PTFE/Silicone, 0.045”

804550L-1232 Clear Vial, Large Hole Cap, PTFE/Silicone, 0.045”


8065TH-1232 Clear Vial, Top HatTM, PTFE/Silicone8065TH-1232A Amber Vial, Top HatTM, PTFE/Silicone

Large Opening R.A.M™ Vials (Step) (2.0 mL volume, 9 mm cap size, 12 mm diameter x 32 mm height)

The new R.A.M.TM High Recovery Vial features aprecision formed conical bottom.

Components packaged in a clear lid tray that fitsinto bench drawer for easy access. Packaging keepsproducts visible and particle free. Preassembledpacks come ready to use. Closures and septa ofyour choice are attached to the vials.

These vials function similarlyto the Kimble ROBO VialTM,National's Target DP, Sun 1,and Wheaton ABC Vials.With a 40% larger opening,the R.A.M.TM vial isspecifically designed to workin robotic arm autosamplers,

like Hewlett-Packard. Choose from clear or amberType I borosilicate glass. Vial incorporates theunique StepVial design that precisely centers alimited volume insert in the vial neck. Availablewith graduated marking spots which can be writtenon with a #2 pencil.


1.5 mL HighRecovery Vial

0.100 mLPolypropylene Vial

The 9mm Top Seal™Closure has a 0.010"molded septa whichallows for easy needlepenetration and isinert to most solvents.The one piece designsaves time byeliminating the step of assembling liners in the closures.

22

Screw Thread Closures (9 mm cap size)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5310-09 Black, Polypropylene Open-Hole5310-09B Blue, Polypropylene Open-Hole5310-09G Green, Polypropylene Open-Hole5310-09N Natural, Polypropylene Open-Hole5310-09R Red, Polypropylene Open-Hole5310-09Y Yellow, Polypropylene Open-Hole

5320-09 Solid Top, Black Polypropylene, Unlined5330-09 Top Seal™ Clear Polypropylene, Molded 10 mil/Septa5360-09 Solid Top, Black Polypropylene, F217 Lined

Septa For Screw Thread Closures (9 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


601010-09 White PTFE Disk 0.010”604040-09 PTFE/Red Rubber, 0.040”604050-09 PTFE/Silicone, 0.040”604060-09 Red PTFE/Silicone/Red PTFE, 0.040”

Preassembled Closure and Septa (9 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5394-09 Black Cap, PTFE/Red Rubber5394-09B Blue Cap, PTFE/Red Rubber5394-09G Green Cap, PTFE/Red Rubber5394-09N Natural Cap, PTFE/Red Rubber5394-09R Red Cap, PTFE/Red Rubber5394-09Y Yellow Cap, PTFE/Red Rubber

5395-09 Black Cap, PTFE/Silicone5395-09B Blue Cap, PTFE/Silicone5395-09G Green Cap, PTFE/Silicone5395-09N Natural Cap, PTFE/Silicone5395-09R Red Cap, PTFE/Silicone5395-09Y Yellow Cap, PTFE/Silicone

5396-09 Black Cap, PTFE/Silicone/PTFE5396-09B Blue, Cap PTFE/Silicone/PTFE5396-09G Green Cap, PTFE/Silicone/PTFE5396-09N Natural Cap, PTFE/Silicone/PTFE5396-09R Red Cap, PTFE/Silicone/PTFE5396-09Y Yellow Cap, PTFE/Silicone/PTFE

5397-09 9 mm Black Cap TFE/SIL Slit5397-09B 9 mm Blue Cap TFE/SIL Slit5397-09G 9 mm Green Cap TFE/SIL Slit5397-09N 9 mm Natural Cap TFE/SIL Slit5397-09R 9 mm Red Cap TFE/SIL Slit5397-09Y 9 mm Yellow Cap TFE/SIL Slit

Closures


Easy-on, easy-offconvenience with atwist of the cap thatproduces anevaporation-proofseal. Larger openingprovides increased

target area for needle penetration. Available in avariety of colors for easy sample identification.Choose a septa best suited for your application.

23



InsertsInserts are availablepreassembled with apolymer bottom spring orpatented Top SpringTM.The polymer spring acts asa shock absorber thatprotects against breakageif the needle bottoms out.The conical design permitscomplete sample removal.




4025-629 0.250 mL Insert, No Spring4025BS-629 0.250 mL Insert, Bottom Spring4035-630 0.350 mL Flat Bottom Insert





Accessories for 9 mm R.A.M. Vials



Convenience Packs* for 2.0 mL R.A.M. Vials







Convenience Packs with Closures/Septa (9 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


909534-12 Clear Vial, PTFE/Red Rubber909535-12 Clear Vial, PTFE/Silicone909536-12 Clear Vial, PTFE/Silicone/PTFE

909534-12A Amber Vial, PTFE/Red Rubber909535-12A Amber Vial, PTFE/Silicone909536-12A Amber Vial, PTFE/Silicone/PTFE

909534E-12 Clear Vial, Graduation Spot, PTFE/Red Rubber909535E-12 Clear Vial, Graduation Spot, PTFE/Silicone909536E-12 Clear Vial, Graduation Spot, PTFE/Silicone/PTFE

909534E-12A Amber Vial, Graduation Spot, PTFE/Red Rubber909535E-12A Amber Vial, Graduation Spot, PTFE/Silicone909536E-12A Amber Vial, Graduation Spot, PTFE/Silicone/PTFE

Componentspackaged in aclear lid tray with100 vials and 100preassembledclosures and septa.Preassembledclosures and septaare separate from

the vials and are in individual plastic bags. Fits intobench drawer for easy access and packaging keepsproducts visible and particle free.

24

Closures


Larger openingprovides increasedtarget area for needlepenetration. Closuresare ideal forautosamplersrequiring closure to

support or hang vial in tray (such as Hitachi, Jasco,Shimadzu etc.) Available in a wide assortment ofcolors. The Top SealTM closure with a 0.010" moldedsepta allows for easy needle penetration and is inertto most solvents. The one piece design saves timeby eliminating the process of assembling liners inthe closures.

Closures are in compliance with CONEG (Council of North East Governors) Standards,all colored closures and septa are Heavy Metals Free!

Big Mouth Screw Thread VialsVials

Big Mouth Screw Thread Vials (Step) (2.0 mL volume, 10-425 mm cap size, 12 mm diameter x 32 mm height)

With a 40% larger opening,broken needles can beprevented due to theincreased target area.Choose from clear or amberType I borosilicate glass.Vial incorporates the uniqueStepVial design thatprecisely centers a limitedvolume insert in the vial

neck. Available with graduated marking spotswhich can be written on with a #2 pencil.







Limited Volume Big Mouth Screw Thread VialsShelf Pack – 100 pieces; Case Pack – 1000 pieces


Plastic Vials – Use with 10-425 mm Closures30510P-1232 0.500 mL Polypropylene Vial30710P-1232 0.750 mL Polypropylene Vial



5310-10 Black, Polypropylene Open-Hole5310-10B Blue, Polypropylene Open-Hole5310-10G Green, Polypropylene Open-Hole5310-10R Red, Polypropylene Open-Hole5310-10W White, Polypropylene Open-Hole5310-10Y Yellow, Polypropylene Open-Hole Cap

5320-10 Solid Top, Black, Polypropylene, Unlined5330-10 Top SealTM, Clear Polypropylene, molded 10 mil septa5330SB-10 Top SealTM, Clear Polypropylene, molded 10 mil starburst septa5350-10 Solid Top, Black Polypropylene Pulp/PTFE Lined

Inserts

25


Refer to the SeptaSelection Guide onpage 41 to choose10 mm septa best suitedfor your application.

Inserts are availablepreassembled with a polymerbottom spring or patented TopSpringTM. The polymer springacts as a shock absorber thatprotects against breakage if theneedle bottoms out. The conicaldesign permits complete sampleremoval. The Step Insert

precisely sits in the neck of the vial, thuseliminating the need for metal or plastic springs.








601010-10 White PTFE Disk, 0.010”603090-10 Black Viton®, 0.030”604040-10 PTFE/Red Rubber, 0.040”

604060-10 Red PTFE/Silicone/Red PTFE, 0.040”604070-10 Red PTFE/Silicone, Slit, 0.040”606050-10 Red PTFE/Silicone, 0.060”606070-10 Red PTFE/Silicone, Slit, 0.060”606081-10 Red PTFE/Silicone, Starburst, 0.060"607550-10 Red PTFE/Silicone, 0.075”

Preassembled Closure and Septa (10-425 mm) Shelf Pack – 100 pieces; Case Pack – 1000 pieces


804040-10 Black Closure, PTFE/Red Rubber, 0.040”804060-10 Black Closure, PTFE/Silicone/PTFE, 0.040”804060-10B Blue Closure, PTFE/Silicone/PTFE, 0.040”806050-10 Black Closure, Red PTFE/Silicone, 0.060”





Closures(continued)

26



4100-1232 Clear Glass Vial4100M-1232 Clear Glass Vial, White Marking Spot

4100-1232A Amber Glass Vial4100M-1232A Amber Glass Vial, White Marking Spot

4100P-1232 Polypropylene Vial


Vials

Shell Vials (12 x 32 mm)

Shell Vials (2.0 mL volume, 12 mm plug, 12 mm diameter x 32 mm height)

Available in clear or amber Type Iborosilicate glass, or polypropylenefor easy disposal. Vials featurethicker walls for safer samplehandling. Available with marking

spots which can be written on with a #2 pencil.

*Any combination of vial and plug is available. Please call.

Convenience Packs* for 2.0 mL Big MouthScrew Thread Vials

Accessoriesfor 10 mm Screw Thread Vials

PreassembledConvenience Packs* for 2.0 mL Big MouthScrew Thread Vials

Snap RacksTM







Convenience Packs with Closures/Septa (10-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


9104040-12 Clear Vial, PTFE/Red Rubber 0.040”9104040-12A Amber Vial, PTFE/Red Rubber 0.040”

9104060-12 Clear Vial, PTFE/Silicone/PTFE 0.040”9104060-12A Amber Vial, PTFE/Silicone/PTFE 0.040”

9104060B-12 Clear Vial, Blue Cap, PTFE/Silicone/PTFE 0.040”9104060B-12A Amber Vial, Blue Cap, PTFE/Silicone/PTFE 0.040”

9106050-12 Clear Vial, PTFE/Silicone, 0.060”9106050-12A Amber Vial, PTFE/Silicone, 0.060”

Preassembled Convenience Packs with Closures/Septa (10-425 mm)Case Pack – 100 pieces


801010T-1232 Clear Vial, PTFE, 0.010”80101T-1232A Amber Vial, PTFE, 0.010”

80210-1232 Clear Step Vial, 250 mL Glass Insert80210-1232A Amber Vial, 250 mL Glass Insert

804040T-1232 Clear Vial, PTFE/Red Rubber, 0.040”80404T-1232A Amber Vial, PTFE/Red Rubber, 0.040”

804060T-1232 Clear Vial, Red PTFE/Silicone/PTFE, 0.040”80406T-1232A Amber Vial, Red PTFE/Silicone/PTFE, 0.040”

806550T-1232 Clear Vial, PTFE/Silicone, 0.065”80655T-1232A Amber Vial, PTFE/Silicone, 0.065”

Snap RacksTM areconstructed ofdurable glassreinforcedpolypropylene, with acenter well toconveniently hold

caps, seals, septa, etc. Racks snap together securelyto double your rack capacity.


Components packaged in aclear lid tray with 100 vialsand 100 preassembledclosures and septa.Preassembled closures andsepta are separate from the

vials and are in individual plastic bags. Fits intobench drawer for easy access and packaging keepsproducts visible and particle free.

Closures

27

Accessories for 12 x 32 mm Shell Vials

Convenience Packs* for 12 x 32 mm Shell Vials

Inserts


Starburst and conicaldesign of the snap plugprovides self centeringneedle penetration

guidance as well as better resealablilty of plug afteruse. Plug is designed to easily push in and removefrom the vial. Tight fit offers good sealability.

Due to the conical design of the snap plug, limitedvolume inserts used in the shell vial stay centeredand straight allowing for easy sample evacuation.

Components packaged in aclear lid tray with 100 shell vialsand 100 snap plugs. Snap Plugsare not attached to the vials andare in individual plastic bags.Fits into bench drawer for easy

access and packaging keeps products visible andparticle free.

Snap RacksTM areconstructed of durableglass reinforcedpolypropylene, with acenter well toconveniently holdplugs, inserts, etc.


The Multi-Plug Safety Sleeveis available in clear K-resin or black glass reinforcedpolypropylene. Use it as atool to make plug and shellvial assembly easier andsafer. The safety sleeve is

"Multi" useful because it is designed to work with1mL, 2mL or 4mL shell vials. One Safety Sleeve works with all three sizes.

Polyethylene Conical Snap Plugs with Starburst (12 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5405SB-12 Natural Plug5405SB-12R Red Plug5405SB-12B Blue Plug5405SB-12G Green Plug5405SB-12Y Yellow Plug

Multi-Plugs with Safety SleeveCat. No. Description

9200-81215 Multi-Plug Safety Sleeve Clear9200-81215B Multi-Plug Safety Sleeve Black

Inserts (Glass)Cat. No. Description

4025BS-629 0.250 mL Insert, Bottom Spring (100 per pack)

Inserts (Polypropylene)Cat. No. Description

4025PBS-631 0.250 mL Insert, Bottom Spring (100 per pack)



9700-12 50 Position White Rack for 12 mm Vials 9700-12B 50 Position Blue Rack for 12 mm Vials



9600-01 Universal Rack 9601-12 25 Position Insert Tray for 12 mm Vials

Convenience Packs with Plugs (12 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


9800-1232 2.0 mL Clear Glass Shell Vial, Natural Plug9800-1232A 2.0 mL Amber Glass Shell Vial, Natural Plug9800P-1232 2.0 mL Polypropylene Shell Vial, Natural Plug


28


Snap Top CapsTM designed forShimadzu autosamplers,simplify handling by eliminatingthe need for threaded closures.Cap provides a tight seal, thuseliminating the varying degrees

of torque applied when using screw thread closures.This unique design eliminates the possibility of vialscocking in the autosampler trays.

Closures

Snap Seal TM Vials (Step) - Use with 13 mm Snap Top Caps TM orAluminum Seals







Limited Volume Snap RingTM Vials - Use with 13 mm Snap Top CapsTM orAluminum Seals

30313G-1545 0.300 mL Glass Insert/Clear Plastic Outside Vial (100 per pack)32513PS-1545 2.5 mL Polypropylene Vial

Snap Top Caps™ (13 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5210-13 Clear Cap, 10 mil PTFE5240-13 Clear Cap, PTFE/Red Rubber5250-13 Clear Cap, PTFE/Silicone5260-13 Clear Cap, PTFE/Silicone/PTFE5280-13 Clear Cap, PTFE/Silicone/PTFE, Starburst5281-13 Clear Cap, PTFE/Silicone, Starburst

Snap Top Caps™ for Shimadzu Autosamplers (13 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5610-13 Clear Cap, 10 mil PTFE5640-13 Clear Cap, PTFE/Red Rubber5650-13 Clear Cap, PTFE/Silicone5660-13 Clear Cap, PTFE/Silicone/PTFE



5110-13 Silver Seal, 10 mil PTFE5140-13 Silver Seal, PTFE/Red Rubber5150-13 Silver Seal, PTFE/Silicone 5160-13 Silver Seal, PTFE/Silicone/PTFE

Vials

WISPTM Style Snap Seal™ Vials - Patented

WISPTM Style Snap Seal™Vials (4.0 mL volume, 13 mm seal, 15 mm diameter x 45 mm height) - Patented

Neck finish allows use of Snap TopCapsTM or standard aluminum seals.Snap SealTM finish eliminates theneed for crimping or decapping.Designed to work in Shimadzu and

Waters WISPTM 48 Position Autosamplers. Choosefrom clear or amber Type I borosilicate glass. Vialsincorporate the unique StepVial design thatprecisely centers a limited volume insert in the vialneck. Available with graduated marking spotswhich can be written on with a #2 pencil.

J.G. Finneran is the originaldesigner and manufacturer of theGlass Insert/Plastic Outside Vials(Glastic). Glastic is a uniquecombination of Type I lowextractable borosilicate glassinsert and a clear thermoplastic

polymer outer vial shell. The glass is the onlycontact between the sample and the seal.

Caps may be snapped onand off by hand whicheliminates the need formetal crimping anddecapping tools, thusreducing potential hazardsdue to sharp aluminum

metal edges. Large opening top provides a greatertarget area for needle penetration.

Larger openingprovides increasedtarget area for needlepenetration.



40275F-744 0.275 mL Insert, Plastic Flange403-638X 0.300 mL Insert, Requires Metal Spring403-639 0.300 mL Insert, Requires Metal Spring403BS-638X 0.300 mL Insert, Bottom Spring403TS-639 0.300 mL Insert, Patented Top SpringTM

405-843 0.500 mL Flat Bottom Insert4000-638 Metal Spring for 0.300 mL Glass Insert4025GF-827 0.250 mL Step Insert, Glass Flange4035GF-842 0.350 mL Step Insert, Glass Flange



403P-638 0.300 mL Insert, No Spring403PBS-638 0.300 mL Insert, Bottom Spring403PTS-638 0.300 mL Insert, Patented Top SpringTM

Universal Vial Rack System - Rack & Trays Available Separately5 pieces per pack



Crimpers/Decappers for 13 mm Crimp Style VialsSold individually


9300-13 Hand Operated Crimper 9310-13 Plier Style Decapper 9320-13 Hand Operated Decapper





29

Accessories for 4.0 mL WISPTM StyleSnap Seal™ Vials

Convenience Packs*for 4.0 mL WISPTM StyleSnap Seal™ Vials


Componentspackaged in aclear lid tray. Fitsinto bench drawerfor easy accessand packagingkeeps productsvisible andparticle free.

InsertsInserts are availablepreassembled with a polymerbottom spring or patented TopSpringTM. The polymer springacts as a shock absorber thatprotects against breakage if theneedle bottoms out. Theconical design permitscomplete sample removal.The Step Insert precisely sits inthe neck of the vial, thus

eliminating the need for metal or plastic springs.

Convenience Packs with Snap Top Caps™ (13 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces




Closures are in compliance with CONEG (Council of North East Governors) Standards, all colored closures and septa are Heavy Metals Free!*Any combination of vial, cap/seal, and liner is available. Please call.

30



601010-13 White PTFE Disk, 0.010”603090-13 Black Viton®, 0.030”604060-13 Red PTFE/Silicone/Red PTFE, 0.040”606040-13 PTFE/Red Rubber, 0.060”

606050-13 Red PTFE/Silicone, 0.060”606050G-13 Gray PTFE/Silicone, 0.060”606070-13 Red PTFE/Silicone, Slit, 0.060”607550-13 Red PTFE/Silicone, 0.075”607550T-13 Tan PTFE/Silicone, 0.075”

Preassembled Closure and Septa (13-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


804060-13 Black Closure, PTFE/Silicone/PTFE, 0.040”806550-13 Black Closure, Red PTFE/Silicone, 0.065”806550TH-13 Black Top HatTM PTFE/Silicone Septa/Closure (Patented)


Refer to the SeptaSelection Guide onpage 41 to choose13 mm septa bestsuited for yourapplication.

Choose thepreassembled capswith septa best suitedfor your application.The patented TopHatTM septa andclosure was designed

to provide a positive physical lock to assure thatpreassembled components arrive intact.



Standard Screw Thread Vials (Step)34013-1545 Clear Vial34013-1545A Amber Vial




Limited Volume Screw Thread Vials30313TG-1545 0.300 mL Glass Insert/Clear Plastic Outside Vial (100 per pack)31213P-1545 1.2 mL Polypropylene Limited Volume Vial (13-425 thread)32513P-1545 2.5 mL Polypropylene Vial32913P-1545 2.9 mL Polypropylene Vial33113-1545 3.1 mL Glass High Recovery Vial (100 per pack)



5310-13 Black, Polypropylene, Open-Hole5310-13B Blue, Polypropylene, Open-Hole5310-13G Green, Polypropylene, Open-Hole5310-13R Red, Polypropylene, Open-Hole5310-13W White, Polypropylene, Open-Hole5310-13Y Yellow, Polypropylene, Open-Hole

5320-13 Solid Top, Black Polypropylene, Unlined5330-13 Top SealTM, Clear Polypropylene, molded 10 mil septa5350-13 Solid Top, Black Polypropylene, Pulp/PTFE Lined5360-13 Solid Top, Black Polypropylene, PTFE/F217 Lined

WISPTM Style Screw Thread VialsVials

WISPTM Style Screw Thread Vials (4.0 mL volume, 13-425 mm cap size, 15 mm diameter x 45 mm height)

Available in a wideassortment of colors.Designed for use withWaters, Shimadzu,Spectra-Physics, Varianand other autosamplers.The Top SealTM closure

with a 0.010" molded septa allows for easy needlepenetration and is inert to most solvents. The one piecedesign saves time by eliminating the process ofassembling liners in the closures.

Designed to work in Shimadzuand Waters WISPTM 48 PositionAutosamplers. Choose from clearor amber Type I borosilicate glass.Vials incorporate the uniqueStepVial design that preciselycenters a limited volume insert inthe vial neck. Available withgraduated marking spots which

can be written on with a #2 pencil.

J.G. Finneran is the originaldesigner and manufacturer ofthe Glass Insert/PlasticOutside Vials (Glastic). Glasticis a unique combination ofType I low extractableborosilicate glass insert and aclear thermoplastic polymerouter vial shell. The glass is

the only contact between the sample and the seal.

Closures

31

Inserts

Accessories for 4.0 mL WISPTM StyleScrew Thread Vials

Convenience Packs* for 4.0 mL WISPTM Style Screw Thread Vials

PreassembledConvenience Packs* for 4.0 mL WISPTM StyleScrew Thread Vial


Components packaged in aclear lid tray with 100 vials and100 preassembled closures andsepta. Preassembled closuresand septa are separate from the

vials and are in individual plastic bags. Fits intobench drawer for easy access and packaging keepsproducts visible and particle free.




9404060-15 Clear Vial, PTFE/Silicone/PTFE, 0.040”9404060-15A Amber Vial, PTFE/Silicone/PTFE, 0.040”

9406550-15 Clear Vial, PTFE/Silicone, 0.065”9406550-15A Amber Vial, PTFE/Silicone, 0.065”

940655TH-15 Clear Vial, Top HatTM, PTFE/Silicone, 0.065”940655TH-15A Amber Vial, Top HatTM, PTFE/Silicone, 0.065”

Preassembled Convenience Packs with Closures/Septa (13-425 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


801010-1545 Clear Vial, 10 mil PTFE 801010-1545A Amber Vial, 10 mil PTFE

804040-1545 Clear Vial, PTFE/Red Rubber, 0.040”804040-1545A Amber Vial, PTFE/Red Rubber, 0.040”

804060-1545 Clear Vial, PTFE/Silicone/PTFE, 0.040”804060-1545A Amber Vial, PTFE/Silicone/PTFE, 0.040”


8065TH-1545 Clear Vial, Top HatTM, PTFE/Silicone, 0.065”8065TH-1545A Amber Vial, Top HatTM, PTFE/Silicone, 0.065”


Inserts are availablepreassembled with apolymer bottom spring orpatented Top SpringTM. Thepolymer spring acts as ashock absorber that protectsagainst breakage if theneedle bottoms out. Theconical design permitscomplete sample removal.The Step Insert precisely sits

in the neck of the vial, thus eliminating the need formetal or plastic springs.



40275F-744 0.275 mL Insert, Plastic Flange403-638X 0.300 mL Insert, Requires Metal Spring403-639 0.300 mL Insert, Requires Metal Spring403BS-638X 0.300 mL Insert, Bottom Spring403TS-639 0.300 mL Insert, Patented Top SpringTM

405-843 0.500 mL Flat Bottom Insert4000-638 Metal Spring for 0.300 mL Glass Insert4025GF-827 0.250 mL Step Insert, Glass Flange4035GF-842 0.350 mL Step Insert, Glass Flange



403P-638 0.300 mL Insert, No Spring403PBS-638 0.300 mL Insert, Bottom Spring403PTS-638 0.300 mL Insert, Patented Top SpringTM




Convenience Packs with Closures/Septa (13-425 mm)

32


Inserts


Due to the conical design of the snap plug, limitedvolume inserts used in the shell vial stay centeredand straight allowing for easy sample evacuation.



403BS-638X 0.300 mL Insert, Bottom Spring



403PBS-638 0.300 mL Insert, Bottom Spring






4100-1545 4.0 mL Clear Glass Vial4100M-1545 4.0 mL Clear Glass Vial, White Marking Spot

4100-1545A 4.0 mL Amber Glass Vial4100M-1545A 4.0 mL Amber Glass Vial, White Marking Spot

4100P-1545 4.0 mL Polypropylene Vial4130P-1545 3.0 mL Limited Volume Polypropylene Vial




Shell Vials (15 x 45 mm)Vials

Shell Vials (15 mm plug, 15 mm diameter x 45 mm height)Available in clear or amber Type Iborosilicate glass, or polypropylenefor easy disposal. Vials featurethicker walls for safer samplehandling. Limited volume shellvials have a precisely designed

conical bottom which permits maximum sampleevacuation. Available with marking spots whichcan be written on with a #2 pencil.

ClosuresStarburst and conicaldesign of the snap plugprovides self centeringneedle penetrationguidance as well asbetter resealablilty of

plug after use. Plug is designed to easily push inand remove from the vial. Tight fit offers goodsealability.





Starburst and conicaldesign of the snap plugprovides self centeringneedle penetrationguidance as well asbetter resealablilty of

plug after use. Plug is designed to easily push inand remove from the vial. Tight fit offers goodsealability.

33



4100-840 1.0 mL Clear Glass Vial4100-840A 1.0 mL Amber Glass Vial4100P-840 1.0 mL Polypropylene Vial4107P-840 0.7 mL Limited Volume Polypropylene Vial

Polyethylene Snap Plugs with Starburst (8 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces




Shell Vials for Waters WISPTM 96 Position Autosampler (8 x 40 mm)

Designed to work in the Waters WISPTM

96 Position Autosampler. Available inclear or amber Type I borosilicate glass,

or polypropylene for easy disposal. Vials feature thickerwalls for safer sample handling. Limited volume shellvials have a precisely designed conical bottom whichpermits maximum sample evacuation.

Vials




Polyethylene Snap Plug, Silicone Lined (8 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


540030-08 Natural Plug, Silicone Lined




Components packaged in a clearlid tray with 100 shell vials and100 snap plugs. Snap Plugs arenot attached to the vials and arein individual plastic bags. Fits

into bench drawer for easy access and packagingkeeps products visible and particle free.

Shell Vials for Waters WISPTM 96 Position Autosampler (8 mm plug, 8 mm diameter x 40 mm height)


Closures

Natural Plug, Silicone Lined





9800-1545 4.0 mL Clear Glass Shell Vial, Natural Plug9800-1545A 4.0 mL Amber Glass Shell Vial, Natural Plug9800P-1545 4.0 mL Polypropylene Shell Vial, Natural Plug9830P-1545 3.0 mL Limited Volume Polypropylene Shell Vial, Natural Plug

34


Inserts

Components packaged in aclear lid tray with 100 shell vialsand 100 snap plugs. Snap Plugsare separate from the vials andare in individual plastic bags.

Fits into bench drawer for easy access andpackaging keeps products visible and particle free.

Due to the conical design of thesnap plug, limited volumeinserts used in the shell vialstay centered and straightallowing for easy sampleevacuation.



Inserts (Glass)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


4015BS-529 0.150 mL Insert, Bottom Spring402-536 0.200 mL Insert, Requires Metal Spring402BS-536 0.200 mL Insert, Bottom Spring4025-629 0.250 mL Insert, No Spring4025BS-629 0.250 mL Insert, Bottom Spring4000-536 Metal Spring for 0.200 mL Inserts

Inserts (Polypropylene)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


4025P-631 0.250 mL Insert, No Spring4025PBS-631 0.250 mL Insert, Bottom Spring









9800-840 1.0 mL Clear Shell Vial, Natural Plug9800-840XS 1.0 mL Clear Shell Vial, Natural Starburst Plug9800-840A 1.0 mL Amber Shell Vial, Natural Plug9800P-840 1.0 mL Polypropylene Shell Vial, Natural Plug9807P-840 0.700 mL Limited Volume Polypropylene Shell Vial, Natural Plug


35



Closures

Caps can be snappedon and off by handwhich eliminates theneed for metalcrimping anddecapping tools, thusreducing potential

hazards due to sharp metal edges. Linerless capsare available. Caps can be used on vials with 8 mmcrimp finish.

Specialty Autosampler Vials and AccessoriesCase Pack – 1000 pieces


6 x 32 mm Crimp Top Vial (8 mm seal) (200 per pack)30308-632 0.300 mL Clear Round Bottom Glass Vial

7 x 30 and 7 x 40 mm Crimp Top Vial (8 mm seal) (200 per pack)30808-740 0.800 mL Clear Flat Bottom Vial30808-740A 0.800 mL Amber Flat Bottom Vial30608-730A 0.600 mL Amber Tapered Bottom Vial30708-740A 0.700 mL Amber Tapered Bottom Vial

8 x 30 mm Crimp Top Vial (8 mm seal) (100 per pack)30808-830 0.800 mL Clear Flat Bottom Vial30808-830A 0.800 mL Amber Flat Bottom Vial

8 x 40 mm Crimp Top Vial (8 mm seal) (100 per pack)30808-840 1.0 mL Clear Flat Bottom Vial32511-1240 2.5 mL Clear Flat Bottom Vial Crimp Top Vial (11 mm Seal)

Snap Top CapsTM (8 mm)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5200-08 Clear Cap, molded Septa5210-08 Clear Cap, 10 mil PTFE5240-08 Clear Cap, PTFE/Red Rubber 5250-08 Clear Cap, PTFE/Silicone5260-08 Clear Cap, PTFE/Silicone/PTFE



5110-08 Silver Seal, 10 mil PTFE5140-08 Silver Seal, PTFE/Red Rubber5150-08 Silver Seal, PTFE/Silicone 5160-08 Silver Seal, PTFE/Silicone/PTFE 5190-08 Silver Seal, Viton®







Specialty Autosampler Vials and Accessories

Vials


36

Closures

Headspace Vials and AccessoriesShelf Pack – 100 pieces; Case Pack – 1000 pieces


Standard 20 mm Aluminum Seal Headspace Vials with Flat Bottoms –use in Hewlett-Packard, Carlo Erba and Shimadzu (Can be sealed with20 mm Poly CrimpTM Seal or Aluminum Seals)

36020-2238 6.0 mL Clear Vial (22 x 38 mm)310020-2346 10.0 mL Clear Vial (23 x 46 mm)320020-2375 20.0 mL Clear Vial (23 x 75 mm)327020-3060 27.0 mL Clear Vial (30 x 60 mm)

European 20 mm Aluminum Seal Headspace Vials with RoundedBottoms – use in Perkin-Elmer, Tekmar, L.E.A.P. Technologies and Varian

310020A-2346 10.0 mL Clear Vial (23 x 46 mm)320020A-2375 20.0 mL Clear Vial (23 x 75 mm)

Headspace Vials and Accessories

Accessories (continued) Crimpers/Decappers for 8 mm Crimp Vials

Sold Individually


9300-08 Hand Operated Crimper 9310-08 Plier Style Decapper 9320-08 Hand Operated Decapper

Vials



5110-20 Silver Seal, 10 mil PTFE5140-20 Silver Seal, PTFE/Gray Rubber5146AL-20 Silver Seal, Aluminum Faced/Silicone, 0.125"5150-20 Silver Seal, PTFE/Silicone

Aluminum Seals – Pressure Release (20 mm)

5141PR-20 Silver Seal, PTFE/Gray Rubber Molded5142PR-20 Silver Seal, PTFE/Gray Rubber5143PR-20 Silver Seal, PTFE/Silicone

Tin Plate Seals – Magnetic (20 mm)Shelf Pack – 100 pieces


5144TP-20 Silver Seal, PTFE/Gray Rubber5145TP-20 Silver Seal, PTFE/Silicone 5146TPAL-20 Silver Seal, Aluminum Faced/Silicone, 0.060"


Cat. No. Description9300-20 Hand Operated Crimper 9310-20 Plier Style Decapper 9320-20 Hand Operated Decapper


37

Injection Port Septa

Bleed and Temperature Optimized (BTO) Septa

Packaged in glass jars – 50 pieces per jar

Cat. No. Description606550BTO-11 11 mm BTO Speta

Advanced Green SeptaPackaged in glass jars – 50 pieces per jar

Cat. No. Description606550GR-11 11 mm Advanced Green Septa

Long Life Yellow SeptaPackaged in glass jars – 25 pieces per jar

Cat. No. Description606550Y-11 11 mm Long Life Yellow Septa

Low Bleed Gray SeptaPackaged in glass jars – 24 pieces per jar

Cat. No. Description606550LB-11G 11 mm Low Bleed Gray Septa

Low Bleed Red SeptaPackaged in glass jars – 24 pieces per jar

Cat. No. Description606550LB-11R 11 mm Low Bleed Red Septa

Bleed and Temperature optimized (BTO)Septa. This Septa is used for GC and GC/MSapplications. Suitable for injection porttemperatures up to 400 degrees C. Packaged in glass jars to prevent contamination.

Advanced Green Septa. This is a generalpurpose septum that combines longer injectionlife, low bleed and low injection port adhesion.Packaged in glass jars to prevent contamination.

Long Life Yellow Septa. This septa is ideal for longor overnight runs. When used with an alignedsyringe needle, the septa can last 2 to 4 timeslonger than many other septa.

Low Bleed Gray Septa. This general purpose septafeatures low bleed with good resealing capabilityand temperature endurance.

Low Bleed Red Septa. This general purpose septafeatures low bleed with good resealing capabilityand temperature endurance.

Closures

Translucent and amber vials are available and havea cone-shaped bottom for better sample recovery.Vials can be autoclaved at 121°C in the uprightposition with cap loosened. The vials areapproximately 10 mm in diameter by 45 mm high.

Disposable Vials and O-Ring Caps

Polypropylene Disposable Vials Shelf Pack – 100 pieces; Case Pack – 1000 pieces


30511D-1045A 0.5 mL Amber Disposable Vial32011D-1045 2.0 mL Translucent Disposable Vials

Ethylene-Propylene O-Ring (11 mm caps)Shelf Pack – 100 pieces; Case Pack – 1000 pieces


5380-11 Natural Cap5380-11A Amber Cap5380-11B Blue Cap5380-11BL Black Cap5380-11G Green Cap5380-11O Orange Cap5380-11R Red Cap5380-11V Violet Cap5380-11W White Cap

Vials

Color-coded caps have a sealing ethylene-propyleneO-ring which ensures a positive, leak-proof closure,preserving the integrity of your samples.


38

96-Well Multi-Tier™ Microtiter Plate System (Patented)

Systems Include: Base Plate, Vials, Prescored PTFE/SIL/PTFE Liner, Cover and Spacers for 1.0 mL, 1.5 mL and 2.0 mL Plates.Sold Individually.


9905LC-812T 0.5 mL MTP System (Topas) with Glass Conical Vials




96-Well Multi-Tier™ Microtiter Plate System - Patented

An improvement on existing 96-Well systems, the Multi-Tier Plate is a modular, reusable system featuring a baseplate capable of securing 0.5, 1.0, 1.5, or 2.0 mL conicalglass, flat bottom and polypropylene vials. The vented design of the base plate assures uniformheating and cooling when immersed in a water bath. The cover locks the liner in place and prevents vial pullout.The prescored PTFE/Silicone/PTFE liner permits easyneedle penetration, while the Molded PTFE/Silicone linerlocks into each of the 96 vials and reseals after multipleinjections thus reducing the chance of solvent evaporationand cross contamination.

Accessories for 96-Well Multi-Tier™ Microtiter Plate System


9900C-812T Cover for Plate (Topas) 5 per Case9900-812T Spacer (Topas) 1 per Case9996-812T Base Plate (Topas) 1 per Case

Sealing Systems for 96-Well Multi-Tier™ Microtiter Plate System


996070-812 Prescored PTFE/Silicone/PTFE Flat Liner996050-812 Molded PTFE/Silicone Liner – 96 Plugs996075-812 Prescored Molded PTFE/Silicone Liner – 96 Plugs



9400-02 2.0 mL Amber Pre-Scored Ampule9400-05 5.0 mL Amber Pre-Scored Ampule9400-10 10.0 mL Amber Pre-Scored Ampule

9401-01 1.0 mL Clear Pre-Scored Ampule9401-02 2.0 mL Clear Pre-Scored Ampule9401-05 5.0 mL Clear Pre-Scored Ampule9401-20 20.0 mL Clear Pre-Scored Ampule

9415-14 Cracker for 1 to 4 mL Ampules9415-510 Cracker for 5 to 10 mL Ampules9415-1120 Cracker for 11 to 20 mL Ampules

Ampules

Stems can be pull-sealed or tip-sealed. Pre-scoredto eliminate the need for filing. Ampule crackerslips over the top at the pre-scored position. Snapit, and discard both the ampule top and the safetycollar to prevent contamination.

Sold individually


91700-00 Black Capsule Holder 91700-01 Black Metallic Capsule Holder



710110-434 Black Bulb, 4 x 34 mm Straight Point Pipette710110G-434 Gray Bulb, 4 x 34 mm Straight Point Pipette

720110-446 Black Bulb, 4 x 46 mm Straight Point Pipette720110G-446 Gray Bulb, 4 x 46 mm Straight Point Pipette

Capsule HoldersTM - Patented

For use in dissolution vessels.Three prongs hold the capsule inplace, permitting the completionof dissolution tests withoutcapsule flotation.

Increased spacing allows the user to pipet samplesor attach caps without removing the vials from therack! Frames are made of polypropylene and inserttrays are made of transparent PETG. Select theinsert for your vial, pop it into the frame, and use!

Dropper Assemblies



9700-08 96 Position White Rack for 8 mm Vials9700-08B 96 Position Blue Rack for 8 mm Vials9700-12 50 Position White Rack for 12 mm Vials9700-12B 50 Position Blue Rack for 12 mm Vials



9600-01 Universal Rack9601-05 25 Position Insert Tray for 5 mm Vials*9601-07 25 Position Insert Tray for 7 mm Vials*9601-08 25 Position Insert Tray for 8 mm Vials9601-12 25 Position Insert Tray for 12 mm Vials*9601-15 25 Position Insert Tray for 15 mm Vials

* Fits Flat Bottom, Round Bottom, and Tapered Vials

Vial Racks


39


40

Screw Thread Finishes

GPI refers to the "Glass Packaging Institute".

The GPI is responsible for establishing and issuingstandards for the types and finishes produced by Americanglass manufacturers.

For example, an 8-425 neck finish is approximately 8 mmin diameter across the outside of the threads.

The 425 represents the finish (style of thread).

Typical GPI finishes found in the chromatography field are asfollows:

8-425 Closure - Varian, Shimadzu

10-425 Closure - Waters Alliance 2690

13-425 Closure - Waters 48 Position WISPTM, Shimadzu

Note: 9 mm thread finish does not appear in the GPI finishes. It is nota standard finish. The 9 mm closure and vial are used with Hewlett-Packard equipment.

Vial Finish Specifications

Standard Screw Thread FinishDefinitions

"T" = Outer diameter of the thread"E" = Inside diameter of the thread"ID" = Inside diameter"S" = Start of thread"H" = Distance from top of finish to shoulder

for closure clearance

Standard Crimp Seal FinishDefinitions

"T" = Outer diameter of seal"E" = Crimp tool and robotic arm clearance"ID" = Inside diameter"A" = Crimp seal thickness"H" = Distance from top to shoulder

for crimp and robotic arm clearance

Technical Information

Glass Technical Information

Terminology

Borosilicate - A glass that is high in silicate and having atleast 5% boron oxide.

Linear Coefficient of Expansion - Fractional change inlength of glass per degree change in temperature.

Strain Point - Maximum temperature to which glassshould be heated during use.

Types of Glass

USP Type - Pharmaceutical glass containers can beclassified as USP Type I, II, III, or NP.

Type I - Borosilicate glass represents the least reactive glass.Type I glass has the least pH shift. (Lowest leachingcharacteristics)

Coefficient of Expansion = 33 or 51 for Clear and 51for Amber

Type II - is de-alkalized soda lime glass with higher levelsof sodium hydroxide and calcium oxide.

Type III - soda lime glass - cannot be autoclaved.Coefficient of Expansion = 88

Type NP - general purpose soda-lime glass used wherechemical durability and heat shock are not factors.

Coefficient of Expansion = 92

GLASS PROPERTIES

Color Clear AmberLinear Coefficient of Expansion 33 51Strain Point (Degrees Celsius) 515 535USP Class Type Type 1 Type 1Light Protection No Yes

41

SEPTA SELECTION GUIDE

Materials Compatability Incompatability Resealability

Silicone Alcohols, acetone, ether, DMF, ACN, THF, chloroform, pyridine, VERY GOODDMSO benzene, toluene, hexane, heptane

PTFE/Silicone PTFE resistance until punctured VERY GOODPTFE/Silicone/PTFE then septa or liner will have VERY GOOD

silicone compatability

Rubber ACN, Acetone, DMF, alcohols Chlorinated solvents, aromatics, EXCELLENT(Natural Butyl) Diethylamine, DMSO, Phenol hydrocarbons, carbon disulfide

Natural PTFE/ PTFE resistance until punctured VERY GOODNatural Rubber then septa or liner will haveButyl PTFE/Butyl rubber compatability VERY GOOD

Viton® Chlorinated solvents, benzene, DMF, DMSO, ACN, THF, pyridine VERY GOODtoluene, alcohols, hexane, heptane dioxane, methanol, acetone

PLASTIC PROPERTIES

Type of Plastic LDPE HDPE PP PMP PSMaximum use temperature, C/F 80°C/176°F 120°C/248°F 135°C/275°F 175°C/347°F 90°C/194°FTransparency Translucent Translucent Translucent Clear ClearSterilization

Autoclaving No No Yes Yes NoDisinfectants Yes Yes Yes Yes NoDry Heat No No No Yes NoRadiation Yes Yes No* No Yes

Specific Gravity 0.92 0.95 0.90 0.83 1.05Flexibility** Good Rigid Rigid Rigid Rigid

Note: Chart is general guideline only.PP* = Some radiation resistant polypropylene resins available.**Flexibility = Depends on thickness.

GLASS EXTRACTABLE DATA

Ions Type I Clear(33) Type I Amber(51)Na 0.3-0.5 0.4-1.4K ND* ND-0.02Ca ND ND-0.1Mg ND NDAl ND ND-0.5Fe ND NDBa ND ND-0.2Zn NDMn ND NDSi ND ND-5

Results in �g/mL* Non detectable



42

CATALOG # PAGE #

30108-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 30108G-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 30108G-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 30108P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1930108T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 30109P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130109T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 30111-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 30111F-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 30111G-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 30111G-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 30111K-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 30111P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 30111S-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 30111T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 30308-632 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30313G-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 30313TG-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3030509P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 30510P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 30511D-1045A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 30511P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 30511T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 30608-730A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30708-740A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30710P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 30711P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 30711T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 30808-740 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30808-740A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30808-830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30808-830A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 30808-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3531108-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 31213P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 31509-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 31511-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 31511SS-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31711-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 31811-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 10 31811-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811E-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 31811M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 32008-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008E-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32008M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 32009-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 32009E-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009E-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32009M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 32010-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2432010E-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

CATALOG # PAGE #

32010E-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010E-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32010M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 32011D-1045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 32011-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 16 32011-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 32011E-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011E-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 32011L-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011L-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LE-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LE-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LE-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LE-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LE-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LE-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LE-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LE-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LE-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LE-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011LM-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3211LM-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 32011S-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 13 32011S-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SE-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SE-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SE-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SE-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SE-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SE-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SE-12AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SE-12AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SE-12AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SE-12AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 32011SM-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3211SM-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1332511-1240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 32513P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 32513PS-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 32913P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 33113-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 33813-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2833813-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2833813E-15R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813E-15AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813M-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 33813M-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 34013-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15AG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013E-15AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3034013E-15AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013M-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 34013M-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 36020-2238 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36310020-2346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 310020A-2346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 320020-2375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 320020A-2375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 327020-3060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4000-530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 204000-536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344000-638 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31

CATALOG # PAGE #

4005BS-425 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 4005BS-625 . . . . . . . . . . . . . . . . . . . . 7, 12,15, 23, 25 401-530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401-531 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401BS-530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401F-529 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401P-530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401PBS-530 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 401PTS-530 . . . . . . . . . . . . . . . . . . . . 7, 12, 15, 23, 25 401TS-529 . . . . . . . . . . . . . . . . . . . . . 7, 12, 15, 23, 254015BS-529 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 402-536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 402BS-536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4025-531 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 20 4025-629 . . . . . . . . . . . . . . . . . . . 7, 12, 15, 23, 25, 34 4025BS-629 . . . . . . . . . . . . . . 7, 12, 15, 23, 25, 27, 34 4025GF-631 . . . . . . . . . . . . . . . . . . . . . . 7, 12, 15, 25 4025GF-827 . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 4025P-631 . . . . . . . . . . . . . . . . . . 7, 12, 15, 23, 25, 34 4025PBS-631 . . . . . . . . . . . . . 7, 12, 15, 23, 25, 27, 34 4025PF-631 . . . . . . . . . . . . . . . . . . . . . . . 7, 12, 15, 25 40275F-744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 403-638X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 403-639 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 403BS-638X . . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 32 403P-638 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31403PBS-638 . . . . . . . . . . . . . . . . . . . . . . . . 29, 31, 32 403PTS-638 . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31403TS-639 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 4035-630 . . . . . . . . . . . . . . . . . . . . . . 7, 12, 15, 23, 25 4035GF-842 . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 405-843 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 31 4100-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4100-840A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4100P-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4107P-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4100-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4100-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4100M-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264100M-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4100P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4100-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4100-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4100M-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324100M-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4100P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4130P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5110-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5110-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5110-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5110-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5120-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5140-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5140-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5140-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5140-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5140-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5140-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5140-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5140-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5141PR-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5142PR-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5143PR-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5144TP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5145TP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365146-AL-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365146-TPAL-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5150-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5150-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5150-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5150-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5150-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5150-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5150-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5150-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5160-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5160-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5160-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5160-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5160-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5160-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5160-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5170-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5190-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355190-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 11, 15, 16 5200-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5200-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 14 5200SB-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5200SB-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5200SB-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CATALOG # PAGE #

5200SB-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5200SB-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5210-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5210-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5210-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5210-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5210-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5210-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5210-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5240-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5240-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5240-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5240-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5240-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5240-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5240-11PP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5240-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5250-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5250-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5250-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5250-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5250-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5250-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5250-11PP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5250-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5260-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5260-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5260-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5260-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5260-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5260-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5260-11PP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 5260-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285270-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5275-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145280-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5280-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5281-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5281-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5282-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5283-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5290-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5310-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-08B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-08G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-08R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-08W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-08Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310L-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5310-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-09B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-09G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-09N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-09R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-09Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5310-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-10B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-10G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-10R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-10W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-10Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5310-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5310-13B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5310-13G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5310-13R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5310-13W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5310-13Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5320-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195320-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5320-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5320-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5330-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195330-08W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195330-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5330-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5330-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5330SB-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5350-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5350-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5350-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5360-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195360-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5360-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5380-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11BL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Numerical Index

CATALOG # PAGE #

5380-11V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5380-11W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5394-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5394-09B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5394-09G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5394-09N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5394-09R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5394-09Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5395-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5395-09B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5395-09G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225395-09N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5395-09R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5395-09Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5396-09Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5397-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5397-09B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225397-09G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5397-09N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225397-09R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5397-09Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 540030-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5400SB-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5400SB-08B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5400SB-08G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5400SB-08R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335400SB-08Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335405SB-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5405SB-08B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5405SB-08G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5405SB-08R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5405SB-08Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5405SB-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275405SB-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5405SB-12G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5405SB-12R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5405SB-12Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5405SB-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5405SB-15B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5405SB-15G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5405SB-15R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5405SB-15Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5500-11 . . . . . . . . . . . . . . . . . . . . . . . . 6, 9, 11, 15, 17 5500-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500SB-11 . . . . . . . . . . . . . . . . . . . . . .6, 9, 11, 15, 17 5500SB-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500SB-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500SB-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5500SB-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5510-11 . . . . . . . . . . . . . . . . . . . . . . . . 6, 9, 11, 15, 17 5510-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5510-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5510-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5510-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5540-11 . . . . . . . . . . . . . . . . . . . . . . . . 6, 9, 11, 15, 17 5540-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5540-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5540-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5540-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5550-11 . . . . . . . . . . . . . . . . . . . . . . . . 6, 9, 11, 15, 17 5550-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5550-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5550-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5550-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11 5560-11 . . . . . . . . . . . . . . . . . . . . . . . 6, 10, 11, 15, 17 5560-11B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11 5560-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11 5560-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11 5560-11Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11 5570-11 . . . . . . . . . . . . . . . . . . . . . . . 6, 10, 11, 15, 17 5581-11 . . . . . . . . . . . . . . . . . . . . . . . 6, 10, 11, 15, 17 5610-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 15 5610-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5640-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 15 5640-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5650-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 15 5650-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5660-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 155660-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 601010-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19601010-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

CATALOG # PAGE #

601010-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 601010-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 601080-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 603090-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 603090-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 603090-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 603570-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 604040-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 604040-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 604040-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 604050-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 604060-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 604060-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 604060-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 604060-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 604070-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 604075-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 604550-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 606040-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 606050-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 606050-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 606050G-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 606070-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 606070-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 606070-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30606081-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 606550-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 606550B-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19606550BTO-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37606550GR-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 606550T-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19606550Y-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37606550LB-11G . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37606550LB-11R . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 607550-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 607550-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 607550-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 607550T-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 610050-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 710110-434 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 710110G-434 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 720110-446 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39720110G-446 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39801010-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 801010-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 801010T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80101T-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26801010-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 801010-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 801080-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 80210-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80210-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 804040-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25804040-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804040-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804040-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 804040-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 804040T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80404T-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 804060-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 804060-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 804060-10B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 804060-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804060-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804060-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 804060-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 804060-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 804060T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80406T-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 804550-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804550-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 804550L-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 806050-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 806050-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 806050-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 806550-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 806550-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 806550-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 806550-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 806550T-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80655T-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 806550TH-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 806550TH-08Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 806550TH-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 8065TH-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8065TH-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8065TH-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 8065TH-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 91700-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CATALOG # PAGE #

91700-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 918511-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918514-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918515-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918516-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918511-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 918514-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 918515-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 918516-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 918521-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918524-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918525-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918526-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918521-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918524-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918525-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918526-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918521P-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918524P-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918525P-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918526P-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918521P-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918524P-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918525P-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918526P-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918551-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918554-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918555-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918556-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918551-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918554-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918555-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 918556-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89200-81215 . . . . . . . . . . . . . . . . . . . . . . . . . 27, 32, 33 9200-81215B . . . . . . . . . . . . . . . . . . . . . . . . 27, 32, 33 920511-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920514-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920515-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920516-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920511-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920514-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920515-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920516-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920551-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920554-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920555-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920556-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920551-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920554-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920555-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920556-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 920511L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920514L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920515L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920516L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920511L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920514L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920515L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920516L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920551L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920554L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920555L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920556L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920551L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920554L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920555L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 920556L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 9084060-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9084060-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 90865L-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 90865L-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 98655TH-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 98655TH-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 909534-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909535-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909536-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909534-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909535-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909536-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909534E-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909535E-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909536E-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909534E-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909535E-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 909536E-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 9104040-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9104040-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9104060-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9104060-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

CATALOG # PAGE #

9104060B-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9104060B-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9106050-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 9106050-12A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 938511-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938514-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938515-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938516-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938511-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938514-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938515-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938516-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938521-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938524-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938525-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938526-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938521-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938524-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938525-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 938526-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 9404060-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 9404060-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 9406550-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 9406550-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 940655TH-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 940655TH-15A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 9300-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9300-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12, 16, 17 9300-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 9300-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9310-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9310-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12, 16, 17 9310-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 9310-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9320-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9320-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12,16, 17 9320-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299320-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9400-02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389400-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9400-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9401-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9401-02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9401-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9401-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9415-1120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9415-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9415-510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 9600-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399601-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9601-07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9601-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9601-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9601-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9700-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 39 9700-08B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 39 9700-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9700-12B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9800-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 9800-840A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349800-840XS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 9800P-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 9807P-840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 9800-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 9800-1232A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 9800P-1232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 9800-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 9800-1545A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 9800P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 9830P-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339905LC-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389910LC-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389915LC-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389920LC-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389900C-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389900-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389996-812T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38996070-812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38996050-812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38996075-812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

43

• Graduated Vial™, R.A.M. Vial™, Scallop Pack™, Snap Rack™, Snap Ring™ Vial, Snap Top Cap™, Top Seal™ Closure and Multi-Tier™ are trademarks of J. G. Finneran Associates

• Capsule Holders™, Poly Crimp™ Seal, Snap Seal™ Vial, Top Hat™, Top Spring™ and 96-Well Multi-Tier™ MTP System are patented by J. G. Finneran Associates

• Ekonical™ is a trademark of Kimble Glass Inc.

• TPX™ is a trademark of Imperial Chemical Indus., Ltd.

• Viton® is a registered trademark of E.I. DuPont

• Waters WISP™ is a trademark of Waters Corporation

Numerical Index (continued)


USA3600 Reilly CourtVineland, New Jersey 08360-1506 USAToll Free: (800) 552-3696Tel: (856) 696-3605Fax: (856) 696-9002E-mail: [email protected]

EuropeUnit D14, Barwell Business ParkLeatherhead Road, Chessington SurreyKT9 2NY United KingdomTel: 44-(0) 208-397-9512Fax: 44-(0) 208-397-5705E-mail: [email protected]

ISO9002

CERTIFIED

Chromatography Vials and Accessories

Design, Engineering and Manufacturing

www.jgfinneran.com

Date post:	11-Jun-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Chromatography Vials and Accessories · 2016. 7. 8. · 4100P-1232 401-531 4025BS-629 4025PBS-631...

Documents