Class 1 Short-Throw Interactive DisplayModule & Starter Kit(PSE-0407stic1-601 & MV-2407stic1-601)PRODUCT BRIEF
MicroVision’s Class 1 Short-Throw Interactive Display Engine provides an integrated solution for high brightness projected display and interactivity in a single module. This fully integrated solution delivers a unique interactivity experience with a large on-demand display with our best-in-class combination of brightness, resolution, size and power consumption. End products embedding this Class 1 Laser Module do not require Laser Warning labels or product level recertification. MicroVision’s technology enables the next level of user interaction for IoT and AI Platforms. With our technology, customers can develop more natural user experiences by adding sight, touch and gesture to existing voice interactions, unlocking opportunities for increased monetization.
Display and 3D sensing based interactivity in a single integrated module
High definition, always-in-focus images
Vivid, saturated laser colors. Intense contrast ratio creating borderless display
Coincident sensing and display field of views, no calibration needed
Multi-mode operation:
- Display: Table top and wall modes
- Interactivity with Virtual touchscreen
Enables compact product form factors with large, on-demand interactive display
Low Power
Class 1 laser module with virtual protective housing and localized automatic power reduction. No laser warning labels needed for end product
PSE-0407stic1-601 & MV-2407stic1-601 Product Brief l DB0140012 January 2020 Revision A.2 l PicoP® is a registered trademark of MicroVision, Inc.
© 2019 MicroVision, Inc. All rights reserved. l Specifications subject to change without notice; Sold subject to MicroVision Terms of Sale. l MicroVision.com
TABLE 1: SAMPLE IMAGE SIZES3
PSE Distance from
Projection Surface3
9.4 inches
10.4 inches
11.4 inches
Width
13.3
14.9
16.4
Diagonal
15.3
17.1
18.8
Throw Ratio
0.7
0.7
0.7
Enhanced Brightness
Luminance (nits)
~400
~320
~260
SPECIFICATIONS1
DISPLAY PERFORMANCE
Fig. 1 Class 1 Short-Throw Interactive Display Module Fig. 2 Dimensions
Fig 3. 15.3-inch diagonal display from 9.4-inch height
INTERACTIVITY PERFORMANCE
Display Technology
Input Resolution
Output Resolution
Brightness
Enhanced Brightness
Color Depth
Aspect Ratio
Throw Ratio
Depth of Focus
Display Refresh Rate
Sequential Contrast
Brightness Uniformity
Color Gamut (vs. sRGB)
Start-up Time
Interactivity Sensing Technology
Sensing Field of View
Virtual Touch Operating Range
Multi-touch
Laser Beam Scanning Technology
1280x720
1280x640
65 lumens
80 lumens (typical video content)
24-bit true color, 16.7M colors
16:9
~0.7 (See Table 1)
0.2m - Infinity
70Hz
>80,000:1
>70%
>220%
<4 sec from power off
<0.1 sec from standby
Scanning LiDAR
Coincident with projection display
6” - 12” Display height
10 points
1 Note: Specifications subject to change without notice 2 Additive to Display Power when Sensing function enabled 3 Distance from projection surface to top of PSE
SCANNING ENGINE (see fig. 1)
Optical Module Size
Electronics Size
Video Input Interface
Control Interface
Interactivity Interface
35x34x62mm (See Fig. 2)
~50x50 mm (See Fig. 2)
MIPI-DSI Version 1.2
UART (w/ MicroVision SDK)
USB2 HID (Android, Linux, Windows)
POWER
Single Supply Input Voltage
Display Power @ 27% Video Image
Display Power @ Full White Image
Interactivity Sensing Power2
12.0V
~7.5 W
~11.5 W
<1.5W
LIGHT SOURCE
Laser Diodes
Laser Safety Classification
Red: ~638nm
Green: ~520nm
Blue: ~450nm
IR: ~830nm
Class 1 Laser Product IEC60825-1 Ed. 3
MODEL NUMBERS
Scanning Engine
Starter Kit
PSE-0407stic1-601
MV-2407stic1-601
STARTER KIT (see fig. 3)
Video Input Interface
Control Interface
Interactivity Interface
HDMI Version 1.3
USB2 (w/ MicroVision SDK)
USB2 HID (Android, Linux, Windows)
Starter KitThe Starter Kit stand is sized to position the display engine at the default height of 9.4 incher to produce 15.3-inch diagonal interactive display as shown in Fig. 3 below.
15.3in
7.5in13.3in
9.4in
50mm
34mm
PicoP® Scanning Engine (PSE)
50mm
35mm