Manufacturers of:
Cloakroom Furniture · Changing Room Furniture
Disabled Persons Aids · Cubicles and Vanity Units
Suppliers to:
Schools · Colleges and Universities · Hospitals
Sports and Leisure Centres · Swimming Pools
Golf Clubs · Football Stadia · Cricket Clubs
Prisons · Military Establishments
Fire Stations · Police Stations
2007/8
CUBICLES
CHANGING
ROOM
FURNITURE
VANITY
UNITS
Biddick School Sports College, Sunderland.
Meet the Broxap Cloakroom Team
Neil HarrisonGeneral Commercial
Manager
Tel: 0191 496 2696Mob: 07711 [email protected]
Peter KaineSales Manager
Tel: 0191 496 2692Mob: 07764 [email protected]
Brian LambSales Executive
Tel: 0191 496 2693Mob: 07841 [email protected]
Carole ElliottSales Advisor
Tel: 0191 496 [email protected]
Katy WallSales Administrator
Tel: 0191 496 [email protected]
Ben HawkingSales Researcher
Tel: 0191 496 [email protected]
Chris PalmerQuality Manager
Tel: 01782 [email protected]
Ian BakerHealth & Safety
Manager
Tel: 01782 [email protected]
Samantha Lee-SaintEnvironmental
Manager
Tel: 01782 [email protected]
Craig MoatSales Executive
Mob: 07825 [email protected]
Broxap Cloakroom Furniture are proud to introduce our new ranges of cubicles, vanity units and internal furniture to complement the
current range of cloakroom and changing room furniture. Broxap Cloakroom Furniture is committed to continual improvement across the
whole of its product range, with the new products being introduced to meet with customer demand for Broxap to become a “one stop
shop” for internal works packages.
This brochure showcases only a selection of the merchandise that Broxap Cloakroom Furniture provide. Due to bespoke room shapes and
sizes, our products will be tailor made to suit whatever requirements are needed by the end user.
Previous contracts have required manufacture of stainless steel frames, aluminium frames, various grades of timber slats, laminate slats,
curved seating and seating to cope with varying floor levels. All of these have been produced and installed to Broxap’s very high standards,
to the delight of our customers.
Our aim is to provide a fast, comprehensive and easy to read quotation at the best possible price, followed by swift manufacture and delivery
of the order (and installation if required), maintaining and improving Broxap Cloakroom Furniture’s already very high standards of service.
We look forward to working together with you in the near future.
Environment Management System, BS EN ISO 14001:2004
Broxap has long recognised its corporate responsibility to carry out its operations whilst minimizing its environment impact. Accreditation
since 1999.
Quality Management System: ISO 9001:2000
Accredited to ISO9001 since 1992.
Business Ethics
We are committed to ensuring that the manner in which we employ staff is fair and equitable. Our equal opportunities policy is designed to
ensure that no person or group of individuals will be treated less favourably because of their race, colour, ethnic origin, gender, sexual
orientation, age or disability.
It is a principle of our business approach that we display integrity and transparency in all dealings with customers, business partners and
suppliers. Staff are not permitted to give or accept gifts, money or favours.
Health and Safety at Work Act
Broxap comply with the Health and Safety at Work Act 1974 and are committed to achieving and maintaining high standards of health and
safety at each factory.
BX/CUB/AEG Aegean Melamine Edged Cubicles
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
A high quality, cost effective melamine edged cubicle system predominately used in schools, officesand factories where zero maintenance and durability is of prime importance.
The Aegean range is a high quality, costeffective system featuring 19mm, 730kg/m3high-density melamine faced chipboard forpartitions, doors and fascias. Panels are sealedand edged with either matching melamine orcontrasting 3mm PVC, complete withattractive satin anodised aluminium hardwarethroughout.
As with all Broxap’s cubicle systems theAegean range is a made-to-measure productdesigned and manufactured to fit exactlywithin the space allocated. Infinitely variableconfigurations can be used to optimiseavailable space in meeting specific customerrequirements.
Hygienic wall claddings, demountableducting systems, vanity units and lightingpelmets are also available to compliment andenhance the installations.
cubic
les
and
vanit
yunit
s
1
FEATURES:
• Edges finished square and veneered as face
• Satin anodised aluminium (AA10) hardwarethroughout
• Secure bolt through hinges
• Door lock emergency release mechanism
• 23 standard colours including patterns
• Anti-finger trap hinges incorporating ‘fall openor close’ mechanism
OPTIONAL EXTRAS:
• Polyester powder coated aluminium hardware
• Anti-tamper fixings
• Infant and junior specification cubicles
• Moisture resistant core
• 3mm profiled PVC edging
• Disabled access cubicles
• Complete installation service available
BX/CUB/AEG Aegean Cubicles
BX/VAN/AEG Aegean Vanity Units
2Reference number: BX/CF/04-07 Website: www.broxap.com
BX/CUB/ODY Odyssey Aluminium Edged Cubicles
A tough, cost effective high quality aluminium edged system where durability and zero maintenancein high-traffic environments such as schools, clubs and factories is a requirement.
cubic
les
and
vanit
yunit
s
The Odyssey range is a high quality, costeffective aluminium edged system featuring19mm, 730kg/m3 high-density melaminefaced chipboard for partitions, doors andfascias. The system is sealed and edged withradiused flush-finished satin adonisedaluminium channels that compliment thecubicle hardware used throughout. Thealuminium edging whilst adding the cubiclehardware used throughout. The aluminiumedging, whilst adding to the system durability,also gives a stylish and attractive appearance.
As with all our cubicle systems the Odysseyrange is a made-to-measure product designedand manufactured to fit exactly within thespace allocated. Infinitely variableconfigurations can be used to optimiseavailable space in meeting specific customerrequirements.
Hygienic wall claddings, demountableducting systems, vanity units and lightingpelmets are also available to compliment andenhance the installations.
FEATURES:
• Satin anodised aluminium (AA10) channel toall edges
• Satin anodised aluminium (AA10) hardwarethroughout
• Secure internally fixed hinges
• Door lock emergency release mechanism
• 23 standard colours including patterns
• Anti-finger trap hinges incorporating ‘fall openor close’ mechanism
OPTIONAL EXTRAS:
• Polyester powder coated aluminium hardware
• Anti-tamper fixings
• Infant and junior specification cubicles
• Moisture resistant core
• 3mm profiled PVC edging
• Disabled access cubicles
• Complete installation service available
BX/CUB/ODY Odyssey Cubicles
BX/VAN/ODYOdyssey Vanity Units
BX/CUB/OCE Oceanus Post Formed Cubicles
A stylish and contemporary high quality system, utilising high-pressure laminate faced chipboard orMDF pilasters and matching melamine faced chipboard partitions and doors. Typical installationswould include hotels, hospitals and restaurants.
The Oceanus range is a stylish andcontemporary high quality system, utilising36mm chipboard or MDF pilasters, facedwith 0.8mm high-pressure laminate withattractive postformed vertical edges. Partitionsand doors manufactured from matching19mm 730kg/m3 melamine faced chipboardpanels, complete with attractive satinanodised aluminium hardware throughout.
As with all Broxap’s cubicle systems, theOceanus range is a made-to-measure productdesigned and manufactured to fit exactlywithin the space allocated. Infinitely variableconfigurations can be used to optimiseavailable space in meeting specific customerrequirements.
Hygienic wall claddings, demountableducting systems, vanity units and lightingpelmets are also available to compliment andenhance the installations.
cubic
les
and
vanit
yunit
s
FEATURES:
• High-pressure laminate faced pilasters,postformed 12” radiuses
• Satin anodised aluminium (AA10) hardwarethroughout
• Secure bolt through hinges
• Door lock emergency release mechanism
• 23 standard colours including patterns
• Anti-finger trap hinges incorporating ‘fall openor close’ mechanism
OPTIONAL EXTRAS:
• Polyester powder coated aluminium hardware
• Anti-tamper fixings
• Infant and junior specification cubicles
• Moisture resistant core
• 3mm profiled PVC edging
• Disabled access cubicles
• Complete installation service available
BX/CUB/OCE Oceanus Cubicles
BX/VAN/OCE Oceanus Vanity Units
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
BX/CUB/ATL Atlantis Solid Grade Laminate Cubicles
A tough, attractive high quality wet area system, utilising 13mm compact grade laminate where wateringress and durability are a key factor. Predominantly used in leisure centre changing rooms andshower areas or vandalism prone environments.
cubic
les
and
vanit
yunit
s
The Atlantis range is a tough, high quality, wetarea system utilising 13mm compact gradelaminate partitions, doors and fascias. Alledges are machine profiled exposing theblack phenolic core, which gives an attractivefinished appearance. The system is furnishedwith satin anodised aluminium hardware.
The system benefits from exceptionalresistance to impact and moisture absorptionand all-round durability.
As with all Broxap’s cubicle systems theAtlantis range is a made-to-measure productdesigned and manufactured to fit exactlywithin the space allocated. Infinitely variableconfigurations can be used to optimiseavailable space in meeting in specificcustomer requirements.
Hygienic wall claddings, demountableducting systems, vanity units and lightingpelmets are also available to compliment andenhance the installations.
FEATURES:
• Machine profiled and radiused edges
• Satin anodised aluminium (AA10) hardwarethroughout
• Secure internally fixed hinges
• Door lock emergency release mechanism
• 23 standard colours including patterns
• Anti-finger trap hinges incorporating ‘fall openor close’ mechanism
OPTIONAL EXTRAS:
• Polyester powder coated aluminium hardware
• Anti-tamper fixings
• Infant and junior specification cubicles
• Disabled access cubicles
• Complete installation service available
BX/CUB/ATL Atlantis Cubicles
BX/VAN/ATLAtlantis Vanity Units
4Reference number: BX/CF/04-07 Website: www.broxap.com
Trespa Athlon
Seating, shoe tray and peg rail also available in 15mm or 20m thick Trespa Athlon. This is the mostsuitable for use in wet areas e.g. swimming pool changing areas.
Benefits include:
• Ideal for use in all public and leisure buildings and for furnituresubject to intensive use
• Impervious to moisture - highly impact resistant
• Highly resistant to wear and tear, ideal for use where heavy useand frequent cleaning are expected
• Excellent scratch resistance - even in heavy duty use, the panelretains its appearance for a very long time
• Does not attract dirt and the material is chemically resistant
• Graffiti can easily be removed, an organic solvent is recommended which should leave the colourunaffected
Standard Ash Timber
Seats:manufactured from 70mm x 25mm ash slats, with pencilround to all edges, sealed and polished.
Shoe Tray:manufactured from 70mm x 25mm ash slats, with pencilround to all edges, sealed and polished.
Peg rail:manufactured from 135mm x 25mm ash, with pencil roundto all edges, sealed and polished.
Materia
ls
Veneered MDF
Seating, shoe tray and peg rail also available in 25mm or18mm thick ash veneered MDF, with rounded edges, sealedand lacquered.
BX29 FF3008 Tynewell Bench
Heavy duty bench with ashtimber slats and plastic coatedsteel tubular frames.
Length: 750mmHeight: 385mmDepth: 267mm
BX29 FF3005 Parkwell Bench
Material as above.
Length: 450mmHeight: 385mmDepth: 267mm
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
6
Wall seats with separate peg rail on wall above. Double sided island units with integral peg rail,manufactured in ash timber with plastic coated steel tubular frames.
Installed at Biddick Sports College, Sunderland.changin
groom
furnit
ure
Solid grade laminate seats, peg rails and shoe trays.
Reference number: BX/CF/04-07 Website: www.broxap.com
changin
groom
furnit
ure
Wall units with ash timber slats. T19 hat and coat hooks with ash timber shelf over.
Installed at Trinity Academy, Doncaster
7
Wall seats, 300mm wide x 450mm high with separate peg rail on wall above. Double sided islandunits, 560mm wide x 450/180mm high with integral peg rail and optional shoe tray. Ash timber withplastic coated steel tubular frames.
Installed at Perse School for Girls, Cambridge.
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
8
Wall seats with separate peg rail on wall above. Double sided island units with integral peg rail, in ashtimber with plastic coated steel tubular frames.
Installed at Acklam Grange School, Middlesbroughchangin
groom
furnit
ure
Peninsular peg rail units in ash timber withplastic coated steel tubular frames and J50coat hooks.
Installed at Valley Gardens Middle School,Whitley Bay, Tyne and Wear
Single sided island units, 300mm wide x1380mm high with integral peg rail. Seats andpeg rail in dark blue Trespa.
Installed at Woodhouse Close LeisureComplex, County Durham
Reference number: BX/CF/04-07 Website: www.broxap.com
cloakroom
furnit
ure
Low level bag storage rack with peg rail above in ash timber and plastic coated steel tubular frame.
Installed at Barnack CE Primary School, Stamford, Lincolnshire
9
Low level bag storage racks against wall, 320mm wide x 420mm high, and double sided island low levelbag storage rack, 680mm wide x 400/1380mm high. In ash timber and plastic coated steel tubularframes with T19 hat and coat hooks.
Installed at Romanby Primary School, Romanby, Northallerton.
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
10
Mobile Cloakroom Unit manufactured in ash timber with plastic coated steel tubular frames and T19hat and coat hooks.
mobil
eunit
s
These mobile lunch box storage units are an ideal solution for schools who struggle with storagefacilities. They can easily be wheeled to and from the dining areas and stored with a minimum useof space.
Manufactured from ash timber and steel tubular frames.
Type A - has a metal framework. Type B - has a slatted framework.
Reference number: BX/CF/04-07 Website: www.broxap.com
BXIU/D560/T with shoe tray £197.00BXIU/D560 without shoe tray £151.00
siz
echarts
and
pric
es
T19 hat and
coat hooks
Optional shoe tray
560mm
150mm
BXIU/D750/T with shoe tray £240.00BXIU/D750 without shoe tray £174.00
T19 hat and
coat hooks
Optional shoe tray
750mm
150mm
BXP3/D560/T with shoe tray £291.00BXP3/D560 without shoe tray £252.00
Double sided island unit - 560mm wide Double sided island unit - 750mm wide Double sided peg rail unit - 560mm wide
T19 hat
and
coat
hooks
560mm
150mm
Optional shoe tray
BXW/F300/T with shoe tray £84.00BXW/F300 without shoe tray £65.00
T19 hat and
coat hooks
300mm
Optional shelf £POA
Optional
shoe tray
150mm
BXW/F400/T with shoe tray £100.00BXW/F400 without shoe tray £75.00
T19 hat and
coat hooks
400mm
Optional shelf £POA
Optional
shoe tray
150mm
BXBS/D560/T with shoe tray £144.00BXBS/D560 without shoe tray £102.00
Wall Unit - 300mm wide, floor fixed Wall Unit - 400mm wide, floor fixed Double sided seat - 560mm wide
560mm
150mm
Optional shoe tray
BXIU/D680/BR £200.00
680mm
T19 hat and
coat hooks
BXW/WF400/BR £88.00
T19 hat and
coat hooks
400mm
Optional shelf £POA
Double sided island unit with low level bagstorage rack
Wall unit with low level bag storage rack
BXIU/S400/T with shoe tray £161.00BXIU/S400 without shoe tray £130.00
T19 hat and
coat hooks
Optional
shoe tray
400mm
150mm
Single sided island unit - 400mm wide
11 Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
12
siz
echarts
and
pric
es
BXWC/300 without shoe tray £62.00
Cantilevered wall unit - 300mm wide
T19 hat and
coat hooks
300mm
BXP3/D750/T with shoe tray £352.00BXP3/D750 without shoe tray £296.00
T19 hat and
coat hooks
750mm
150mm
Optional shoe tray
BXP2/300/T with shoe tray £166.00BXP2/300 without shoe tray £146.00
T19 hat and
coat hooks
150mm
Optional shelf £POA
Optional
shoe tray
300mm
BXP2/400/T with shoe tray £189.00BXP2/400 without shoe tray £158.00
Double sided peg rail unit - 750mm wide Shelf peg rail unit - 300mm wide Shelf peg rail unit - 400mm wide
T19 hat and
coat hooks
150mm
Optional shelf £POA
Optional
shoe tray
400mm
BXWC/400 without shoe tray £68.00
T19 hat and
coat hooks
400mm
Optional shelf £POA
Cantilevered wall unit - 400mm wide • STANDARD COLOUR RANGE •
• PLEASE REMEMBER •
All prices are per metre and exclude VAT and delivery.
Quantity discounts available.
Optional extras available at an additional cost:back rest, high level shelf, heating pipe covers.
Other sizes are available on request, please enquire.
Site surveys can be arranged at an additional cost. Ifyou are unsure of your requirements or you need todiscuss your installation, one of our industry experts
can visit.
Junior HeightInfant Height Senior Height
Shelf height
1800mm
Peg rail height
1680mm
Seat height
450mm
Shelf height
1495mm
Shelf height
1245mm
Peg rail height
1375mm
Peg rail height
1125mm
Seat height
380mmSeat height
300mm
BEIGE
RAL 1015
BLUE
RAL 5010
YELLOW
RAL 1021
DARK GREY
RAL 7016
BROWN
RAL 8019
BLACK
RAL 9005
RED
RAL 3020
WHITE
RAL 9016
LIGHT GREY
RAL 7001
DARK GREEN
RAL 6005
Reference number: BX/CF/04-07 Website: www.broxap.com
fir
estatio
ns
Changing room furniture and units for firemen’s kit complete with stainless steel tubular boot rack.
Installed at Bradford Fire Station.
13
Changing room furniture and units for firemen’s kit in ash timber with plastic coated steel tubularframes.
Installed at Fire Service Training Headquarters, West Yorkshire Fire Service
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
14
Military style shelving unit including hanger units and mesh storage shelving.
Installed at Ministry of Defence.M
ilit
ary
Style
Shelvin
g&
pris
on
grade
seatin
g
Heavy duty prison grade steel seating.
Installed at HMP Wymott, Leyland, Preston.
Reference number: BX/CF/04-07 Website: www.broxap.com
lockers
3 tier lockers in steel with sloping tops.
Installed at Valley Gardens Middle School,Whitley Bay, Tyne and Wear.
Single tier and 3 tier lockers in steel.
Installed at John Spence Community School,Tyne and Wear.
2 tier lockers in steel with sloping tops.
Installed at Whitley Bay High School, WhitleyBay, Tyne and Wear.
Single tier and 4 tier lockers in steel.
Installed at Acklam Grange School,Middlesbrough.
15 Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
16
locker
optio
ns,fin
ishes
and
specif
icatio
n
Standard Door Colour Range Standard Carcass Colour Range
BLUERAL 5019
REDRAL 3020
YELLOWRAL 1003
GREENRAL 6018
CREAMRAL 1013
SMOKE WHITERAL 9002
SMOKE WHITERAL 9002
SILVER GREYRAL 9006
COFFEERAL 8025
Lock options
Standard key lock (with numbered lockand key fob). £9.15 each
Coin/token - return/retain lock.£49.45 each
Standard key lock, alternate style showing inside of lock (with numberedlock and key fob). £POA
Locker options
Sloping top lockers which prevents accumulation of rubbish and unwanted waste and is available on allstandard lockers at an additional cost. £8.32 per single unit
Close-up of locker door with air vent systemallowing each compartment to ‘breathe’.
Timber finish locker doors Locker stand Locker seat and stand
Ash Beech Birch
Cherry
Lockers are often used in areas where floorsneed frequent cleaning. Locker Standsprovide maximum floor access. The Stand ismanufactured to suit a particular installationusing 25mm square tube. Available to suitany number of lockers, all complete withadjustable levelling feet.
Two hardwood slats and metal frameworkform a bench and seat in front of the lockerallowing full height access. The Seat andStand is manufactured to suit any particularinstallation. Available to suit any number oflockers, all complete with adjustablelevelling feet.
Maple Oak
Timber locker door are an alternative to thestandard metal finish.
Adjustable feet foruneven surfaces
Reference number: BX/CF/04-07 Website: www.broxap.com
dis
abled
persons
aid
s
Folding shower seat shown with Trespa Athlonslats.
Installed at Alderman Leach Primary School,Darlington.
Folding grab rail.
Installed at Queen Elizabeth Hospital,Gateshead, Tyne and Wear
Grab rails for wheelchair accessible WC.
Installed at Sage Music Centre, Gateshead, Tyne and Wear.
17 Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
18
dis
abled
persons
aid
s
A
B
STANDARD DIMENSIONS:A = 300mm, 450mm, 600mm. B = 85mm, 200mm.OTHERWISE MADE TO SUITCUSTOMER REQUIREMENTS.
BXGR1/300 grab rail 300mm £POABXGR1/450 grab rail 450mm £POABXGR1/600 grab rail 600mm £POAPlease note: Price is per single rail as abovesizes.
A B
xo
STANDARD DIMENSIONS:
A = 450mm
B = 450mm
X = 135o
OTHERWISE MADE TO SUIT
CUSTOMER REQUIREMENTS.
BXGR2/135 grab rail. £POAPlease note:Price is per single rail as above sizes.
B
x o
A
STANDARD DIMENSIONS:
A = 450mm
B = 450mm
X = 90o
OTHERWISE MADE TO SUIT
CUSTOMER REQUIREMENTS.
BXGR2/90 grab rail. £POAPlease note: Price is per single rail as abovesizes.
B
A
STANDARD DIMENSIONS:
A = 750mm
B = 750mm
OTHERWISE MADE TO SUIT
CUSTOMER REQUIREMENTS.
BXGR3 grab rail. £POAPlease note: Price is per single rail as abovesizes.
A
B
D
C
DIMENSIONS TO SUIT
CUSTOMER
REQUIREMENTS.
BXGR6 grab rail. £POA
A
THIS RAIL HAS AN
ADJUSTABLE HEIGHT FIXING
FLANGE AT CEILING END.
DIMENSIONS TO SUIT CUSTOMER
REQUIREMENTS. TUBE DIAMETER 42mm.
HORIZONTAL SUPPORT IS AN OPTIONAL EXTRA.
BXGR7/FC floor to ceiling grab rail. £POAPlease note: Price is per single rail.
A
B
C
DIMENSIONS TO SUIT CUSTOMER REQUIREMENTS.THIS RAIL CAN BE MADE TO SUIT A LEFT HAND (LEFT HAND SHOWN)OR A RIGHT HAND CORNER.
BXGR8 grab rail. £POAPlease note: Price is per single rail.
A
B
AVAILABLE WITH MECHANICAL HINGE
OR HYDRAULIC SAFETY HINGE SYSTEM.
A = 750mm
B = 750mm
ALSO AVAILABLE WITH BASE
SUPPORT FOR FLOOR MOUNTING.
THIS IS USEFUL WHERE A SATISFACTORY
WALL FIXING IS NOT POSSIBLE.
BXGR9 grab rail. £POAPlease note: Price is per single rail as abovesizes.
BXFS10/450 folding shower seat450mm wide. £POA
BXFS10/600 folding shower seat600mm wide. £POA
50
75
0
70
0
50
50
360
100
75
0
150
45
0
350
500
750
Typical grab rail layouts.
Standard Colour Range
BEIGE
RAL 1015
BLUE
RAL 5010
YELLOW
RAL 1021
DARK GREY
RAL 7016
BROWN
RAL 8019
BLACK
RAL 9005
RED
RAL 3020
WHITE
RAL 9016
LIGHT GREY
RAL 7001
DARK GREEN
RAL 6005
Other sizes are available on request, please enquire. All prices are per unit as shown in diagram, excluding VAT and delivery, quantity discounts available.Site surveys can be arranged at an additional cost. If you are unsure of your requirements or you need to discuss your installation, one of our industry experts can visit.
Reference number: BX/CF/04-07 Website: www.broxap.com
boot
&shoe
cleanin
g
equip
ment
BXBS/OXF Oxford Boot & Shoe Cleaner
Welded steel boot and shoe cleaner with hand support frame.
This is the most popular model for spiked and studded shoes and boots. It comes fitted with a centre brush and two side brush units.
BXBS/OXF-6 and BXBS/OXF-8 models have three support legs and are fitted with two centre brushes.
Legs are set at 450mm into the ground.
Replacement brushes are available.
19
CODE WIDTH PRICE REPLACEMENTBRUSHES
BXBS/OXF-3 915mm (3ft) £139.00 £44.00
BXBS/OXF-4 1220mm (4ft) £149.00 £44.00
BXBS/OXF-6 1830mm (6ft) £168.00 £67.00
BXBS/OXF-8 2440mm (8ft) £193.00 £67.00
BXBS/CAM Cambridge Boot & Shoe Cleaner
Welded steel boot and shoe cleaner with hand support frame.
Fitted with centre brush assembly, one side brush unit and one steel mud scraper unit.
BXBS/CAM-6 and BXBS/CAM-8 models have three support legs and are fitted with two centre brushes.
Legs are set at 450mm into the ground.
Replacement brushes are available.
CODE WIDTH PRICE REPLACEMENTBRUSHES
BXBS/CAM-3 915mm (3ft) £126.00 £42.00
BXBS/CAM-4 1220mm (4ft) £137.00 £42.00
BXBS/CAM-6 1830mm (6ft) £154.00 £60.00
BXBS/CAM-8 2440mm (8ft) £189.00 £60.00
Sales Hotline: 0191 496 2699 Fax: 0191 483 5552 Email: [email protected]
20
boot
&shoe
cleanin
g
equip
ment
BXBS/SUS Sussex Boot & Shoe Cleaner
Robust, heavy duty tubular steel boot and shoe cleaner with hand support bar.
Supplied fitted with a centre brush, two inner side brushes, one outer brush unit and one steel mud scraper unit.
The Sussex cleaner is ideal for bolting onto a concrete base.
Rawlbolts can be supplied @ £2.05 each + VAT (4 required).
Replacement brushes are available at £50.00.
Dimensions:• Width: 690mm • Depth: 170mm • Height: 1000mm
BXBS/WIN Winchester Boot & Shoe Cleaner
Welded steel, vandal resistant boot and shoe cleaner.
Supplied with centre brush, two steel scraper side units and hand support frame.
Ideal for bolting onto a concrete base.
Rawlbolts can be supplied @ £2.05 each + VAT (4 required).
Replacement brushes are available.
CODE WIDTH PRICE REPLACEMENTBRUSHES
BXBS/WIN-3 915mm (3ft) £126.00 £35.00
BXBS/WIN-4 1220mm (4ft) £137.00 £35.00
BXBS/WIN-6 1830mm (6ft) £158.00 £57.00
BXBS/WIN-8 2440mm (8ft) £184.00 £57.00
CODE WIDTH PRICE REPLACEMENTBRUSHES
BXBS/SUS 690mm £168.00 £50.00
Reference number: BX/CF/04-07 Website: www.broxap.com