CNC CUTTING SYSTEMS

Features:•Heavy duty type, robust, strong, steel construciton

•Gantry structure and dual drive system for cutting accuracy

•Mitsubishi AC servo motors and drives with rack&pinion / linear guide on transverse, rail on longitudinal axis

•Planetary gearboxes with minimum backlash enhance system repeatibility

•Hypertherm ArcGlide THC automatic torch height control and initial height sensing with linear guides and screw

•Hypertherm Torch Breakaway Kit with magnetic torch crash protection

MAGMACUT MODULAR---MODEL--- 2500DD 3000DD 4000DD

NET CUTTING WIDTH(mm) 2700 3200 4200DISTANCE BETWEEN RAILS(mm) 3620 4120 5120OVERALL MACHINE WIDTH(mm) 4675 5175 6175

OVERALL LENGTH(mm) Cutting length + 2300OVERALL HEIGHT (mm) 2950

MAXIMUM IDLE SPEED(mm/min) 12000

NOTE: Cutting length can be increased by 2 meters of additional modules. Minimum cutting length is 6 meters in modular tables.

CNC CUTTING TABLES

Operating system Microsoft Windows XP® - embedded;

Screen 15’ LCD Touch ScreenProcessor Intel 2.5 GHz or greater

Memory 1 GB RAM

Hard drive 80.0 Gigabyte hard drive or greater

Communication RS232-422-485; Ethernet LAN; Hypernet andUSB ports available

CNC CONTROLLER

True Hole™ Technology•Hypertherm’s patent pending TrueHole cutting technology producessignificantly better hole quality thanwhat has been previously possiblebefore using plasma.•This technology was developed formild steel from gauge to 1“ (25mm),and has been optimized from a1:1 to a 2:1 diameter to thicknessratio.• Delivers “bolt-ready” quality holesautomatically and with minimaloperator intervention

*True Hole technology requires a HyPerformance Plasma HPRXD auto gassystem along with a True Hole enabled nesting software(HyperthermProNEST), CNC(Hypertherm MicroEdge), and torch height control(HyperthermCommandTHC).

OXY-FUEL CUTTING•Thanks to Torch Height Control system(Hypertherm Sensor OHC System), the distance between material and torch stays same during cutting for hiqh quality.

•Automatic Ignition

•CNC controlled low/high preheat settings

•KOIKE cutting tips and cutting torch

• Up to 250 mm thickness cutting

CNC COMPACT CUTTING TABLES

MAGMACUT COMPACTMODELS 1500X3000 2000x4000NET CUTTING WIDTH (mm) 1500 2000NET CUTTING LENGTH (mm) 3000 4000OVERALL WIDTH (mm) – except cabinet 2500 2904OVERALL LENGTH (mm) 3865 4895HEIGHT (mm) 1582 1582MAX. IDLE SPEED (mm/min.) 12000 12000

•All Hypertherm Powermax mechanized series andall HPR XD series are applicable as plasma powersource.

• If HPR XD series are selected as plasma source; •Hypertherm MicroEdge PRO CNC unit,•Hypertherm ArcGlide THC system,•Mitsubishi AC servo motors are used.

• The table supports Hypertherm True Hole technology if HPR XD automatic gas console andProNest nesting software are used.

(*) Pierce thickness values are formechanized cutting

NESTING SOFTWARES

C-CUT Nesting Software•Flexible nesting and cutting, bothmanual and automatic.•Complete geometric tools to drawparts•Imports geometry via. DXF and BMP scanned pictures•Easily cuts text in any font and size.•Automatic controls of lead types andparameters.•Preset for a wide range of plasmasand sheet metal types.

Hypertherm ProNEST

•Hypertherm True Hole™ technology is supported•Automatic cut direction, sequencing, and tool-pathing•Automatic assignment of material-based lead-in/out•User-defined material database and plate list Edit lead-in/out positionand style within the nest Material-based part, plate, and pierceseparation•Interactive and automatic plate cropping•Automatic and manual nest sequencing Animated cutting sequencesimulation Material-based process parameters Material-based cuttingtechniques