BioMedica Diagnostics Inc.Affordable Diagnostic Solutions

BMD -M 1S i n g l e C h a n n e l P o r t a b l e C o a g u l o m e t e r

• Single Channel Optical Detection System• Reduce Volumes up to One Quarter• Onboard Computer with an Interactive Program• Automatic INR Calculation• User-Selectable Program Options• Adaptable to Most Standard and Non-Standard Clotting Assays• PC Connectivity• Optional External Printer• CSA, UL, TÜV-GS, CE-Mark Approved

94 Wentworth Road, P.O. Box 1030

Windsor NS, B0N 2T0, CanadaTel: 902 798-5105 ● Toll-free in Canada: 1 877 798-6862 ● Fax: 902 798-1025

e-mail: sales@biomedicadiagnostics.comwww.biomedicadiagnostics.com

94 Wentworth Road, P.O. Box 103094 Wentworth Road, P.O. Box 103094 Wentworth Road, P.O. Box 103094 Wentworth Road, P.O. Box 103094 Wentworth Road, P.O. Box 103094 Wentworth Road, P.O. Box 1030

BioMedica Diagnostics Inc.

BMD -M 1S i n g l e C h a n n e l P o r t a b l e C o a g u l o m e t e r

The BMD-M1 is ideal for small and medium size laboratories, blood banks, intensive care units and emergency services. Its optical detection system uses only one-quarter of the volume of sample and reagents generally required by other analyzers.

The coefficients of variation obtained are lower than 2 to 5%, depending on the test and reagents used. A new double micro-cuvette allows for effective and rapid processing of a larger number of samples. Automatic amplification has been especially designed for new sensitive thromboplastin reagents and equalizes high differences of turbidity from reagents and samples. All specific test parameters are preset in its memory and its interactive program can be adjusted according to the preferences of the operator.

The measurement can be started either manually when the reagent is added or with a connected autopipette and electronic start. The results are displayed in the measured dimension and can be converted into other desired units with the press of a button. A connected printer will automatically print out the results in all dimensions with optic channel, patient number and test name. Computer connectivity allows measuring curve data to be transmitted to use in spreadsheet or report programs. Software updates can be easily applied to the instrument from a personal computer.

Specifi cationsVolume Usage Measure all clotting based Coagulation tests with a quarter of the usual volumes.

e.g. PT: 25 µl sample + 50 µl reagent

Tests PT, APTT, TT, FIB, Fa-I (Factor Intrinsic), Fa-E (Factor Extrinsic)

Selectable Dimensions s, INR for PT, “U” (units) g/L for Fibrinogen, % for Factors

Standard Package 1 Pc Coatron M11 Pc Power Supply25 Pcs Single cuvette5 Pcs Reagent tubes2 Pcs Reagent adaptors (pre-mounted)1 Pc Operation Manual1 Pc Warranty card

Incubation Block 1 Detection position, 6 Incubation wellsTemperature: 37.0 °C ± 0.2 °C

Optic Block 1 Channel Optics

Device SMD Board, Microcontroller, 16-bit Analog-Digital Converter, Memory: 128 Kb

Ambient Temperature From 18 °C to 23 °C

Display 2 lines x 16 Characters LCD

Keyboard Foil keyboard, 3 x 3 matrix with Test, Functions and Numerical keys

Printer(Optional)

External, serial thermal printer with print-out of the results in all selected dimensions and print-out of system parameters

Dimensions 13 x 24.5 x 6 cm (5 x 9.5 x 2.5 in) (w/d/h)

Weight 0.51 kg (1.1 lbs) (w/o Power supply)

Power Supply Input: 100-240 V AC, 50/60 HzPower: 12 W

Certifi cations Approved by the Canadian Standards Association (CSA), the US Underwriters Laboratories (UL), and the European Union (CE-Mark and TÙV-GS)

Design and specifi cations subject to change without notice.