Coating Chemical_TPU

1

C o at i n g C h e m i c a l i s yo u r b e s t c h o i c e .

1 9 8 8

COATING CHEMICAL

"Creating Value" for customers is the key

motivation that CCIC operates and invests

resourses for research and innovation. CCIC

not only helps customers deal with complex

processing problems, but also create value for

customers.

CCIC's full product series: TPU, PU resin,

polyester polyol, PU adhesive for flexible

packaging (PUA), water based PU,

solvent-free polyurethane adhesive, SIPEG,

and hardener for epoxy resin, and the

professional technical teams could meet

customer needs in various industries.

Valued Client

PRODUCTSeries

COMPANY PROFILE

Coating Chemical Industry Co., Ltd. (CCIC) was

founded in Taichung in 1988, and it started the

production as PU (Polyurethane). With over 20

years of experiences in this field, it has become one

of the companies with considerable scale in the

world and successfully built good reputation under

the brand of "COATING" in global market. Currently

CCIC has two R&D and production sites in Taiwan

and China with several brance offices around the

world. CCIC has been serving global market, and it

will keep expanding the scope to satisfy customer

needs as much as possible.

1


1 9 8 8

COATING CHEMICAL

"Creating Value" for customers is the key

motivation that CCIC operates and invests

resourses for research and innovation. CCIC

not only helps customers deal with complex

processing problems, but also create value for

customers.

CCIC's full product series: TPU, PU resin,

polyester polyol, PU adhesive for flexible

packaging (PUA), water based PU,

solvent-free polyurethane adhesive, SIPEG,

and hardener for epoxy resin, and the

professional technical teams could meet

customer needs in various industries.

Valued Client

PRODUCTSeries

COMPANY PROFILE

Coating Chemical Industry Co., Ltd. (CCIC) was

founded in Taichung in 1988, and it started the

production as PU (Polyurethane). With over 20

years of experiences in this field, it has become one

of the companies with considerable scale in the

world and successfully built good reputation under

the brand of "COATING" in global market. Currently

CCIC has two R&D and production sites in Taiwan

and China with several brance offices around the

world. CCIC has been serving global market, and it

will keep expanding the scope to satisfy customer

needs as much as possible.

2

p 6

p 5

p 7

TPU For Polyester TypeApplicable for linear tube, braided hose, coiled tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

TPU Applicable for CalenderingConveyor belt, sheet and film, air cushion, protection sleeve, extrusion,profile extrusion.

TPU Applicable for injectionSealing circle, outsoles and decorations of shoes, parts of sandal, parts of bicycle, sporting equipment, caster roller, dirt-proof boot, mobile phone case, phone keypad, animal ear tags, guide post, top life, gear.

TPU Applicable for Hotmelt Adhesive

Hotmelt adhesive film,sealing tape, textile lamination,counter, toe puff

Industry Applications

TPU ForPolyether TypeApplicable for linear tube, braided hose, coiled tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

TPU Applicable for Film and SheetTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.

TPU Applicable for Solvent-Based

Footwear lamination, textile lamination

TPU Applicable for conveyor belt processing

Melt coatings on textile substrates, conveyor belts, belting, by extrusion, calendering or sintering. Extruded films and fabric coatings. Low melting point carrier for TPU color and additives master batches.

p11

p10

p14

Future prospects

p15Processing andpackaging advice

p16

p 8

TPU Applicable forBreathable FilmTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.

p 9

p12

p13content

3

p 6

p 5

p 7

TPU For Polyester TypeApplicable for linear tube, braided hose, coiled tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

TPU Applicable for CalenderingConveyor belt, sheet and film, air cushion, protection sleeve, extrusion,profile extrusion.

TPU Applicable for injectionSealing circle, outsoles and decorations of shoes, parts of sandal, parts of bicycle, sporting equipment, caster roller, dirt-proof boot, mobile phone case, phone keypad, animal ear tags, guide post, top life, gear.


Hotmelt adhesive film,sealing tape, textile lamination,counter, toe puff

Industry Applications

TPU ForPolyether TypeApplicable for linear tube, braided hose, coiled tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

TPU Applicable for Film and SheetTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.


Footwear lamination, textile lamination

TPU Applicable for conveyor belt processing


p11

p10

p14

Future prospects

p15Processing andpackaging advice

p16

p 8

TPU Applicable forBreathable FilmTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.

p 9

p12

p13content

4

5

CCIC is you r best choice!

0 1 -- Starting from producing polyol & PU. “The best products come from the best materials.”-- Strict quality control to comply with the international quality standard process and provide stable & reliable product quality.

Material control and stable product quality

0 2 --Raw materials for adhesive, fabric surface processing, yarn bonding on fastening tapes, adhesion, fabric to film lamination, adhesive for flexible packaging, dry and wet process synthetic leather, adhesives for book binding and woodworking, etc.

Sufficient capacity to produce PU Resin applied to various industries

0 3 -- Easy to process and operate, environmental protection, no VOC discharge, excellent properties, and to meet diversed needs from customers.

Excellent and reliable products characteristics

0 4 --CCIC has many excellent master's and doctor's degree in professional fields. From PU resin to PUA (PU adhesives for flexible packaging), PUR, solvent-free adhesive, as well as research and development for water-based PU polyurethane.

Emphasize on R&D and continue to innovate

0 5 -- There are many service teams with years of professional training locatd in local markets to provide customers with immediate service to solve problems.

Professional service teams for the local

6

Application CharacteristicsGeneral extrusion type tube, linear tube, braided hose, coiled tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

Gene ra l g rade , good phys i ca l properties, easy to process, cost effective production. The nature is superior; leaves the material stably easy to process; the caliber size is stable; pipe shaft smooth and glossy.

Specifications

Property Hardness (Shore A/D)

100% modulus(Kgf/cm2)

300% modulus (Kgf/cm2)

UltimateElongation(%)

Tensile strength

(Kgf/cm2)

Test Method

ASTM D-2240

ASTM D-412 ASTM D-412 ASTM D-412 ASTM D-412

EX-80A 80±2A 50 85 800 300

EX-85A 85±2A 60 90 600 300

EX-90A 90±2A 70 110 550 320

EX-95A 95±2A 110 170 450 340

EX-98A 98±2A 140 200 400 380

EB-98A 98±2A 150 260 550 450

EX-62D 62±2D 180 230 400 360

+ The Specific Gravity of this series product is between 1.19±0.02

+ Suggested drying temperature and time:Hopper inlet air temperature should be 90°–110°C X 2~4 hours.It adjusts according to the dried effect of desiccant dehumidifying hopper dryer. + The package specification of this series product are 25kg paper bags. + We can provide unique products according to each customer's requirement beyond the above categories.

+ The data is for reference because it changes according to different designs made by customers.

TPU For Polyester Type

7

TPU For Polyether Type

Application CharacteristicsGeneral extrusion type tube, l inear tube, f ire hose, coi led tube, reinforced hose, cover on steel wire, wire & cable, profile extrusion.

Good flexibility at low temperature, h y d r o l y s i s r e s i s t a n c e , f u n g u s resistance, good physical properties, easy to process.

Specifications





Tensile strength

(Kgf/cm2)

Test Method

ASTM D-2240


ER-80A 80±2A 60 90 550 280

ER-85A 85±2A 50 80 500 320

ER-90A 90±2A 80 120 450 320

ER-95A 95±2A 110 150 400 330

ER-98A 98±2A 130 190 400 350

ER-62D 62±2D 180 270 400 370

ER-80AS 80±2A 60 100 500 300

ER-88AS 88±2A 75 130 400 320

+ The Specific Gravity of this series product is between 1.12±0.02 + Suggested drying temperature and time:Hopper inlet air temperature should be 90°–110°C X 2~4 hours.It adjusts according to the dried effect of desiccant dehumidifying hopper dryer. + The package specification of this series product are 25kg paper bags. + We can provide unique products according to each customer's requirement beyond the above categories.


C

8



TPU Applicable for Film and Sheet

Application CharacteristicsTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.

The fluidity is good, well controlled viscosity, excellent transparence, good workability for high-cycle plastic soldering, anti-ultraviolet ray, etc.

SpecificationsProperty Hardness

(Shore A/D) 100%

modulus(Kgf/cm2)


Ultimate Elongation(%)

Tensile strength

(Kgf/cm2) TX-80A 80±2A 50 85 800 300

TB-85AG 85±2A 55 100 600 420

TB-82AD 82±2A 50 70 800 150

TB-85AD 85±2A 60 85 750 180

TB-90AD 90±2A 80 110 650 220

TB-95AD 95±2A 130 210 450 260

EB-85AC 85±2A 75 170 850 330

EB-90AC 90±2A 100 220 650 370

TB-85AU 85±2A 60 80 750 180

TB-90AU 90±2A 80 110 650 230

TB-95AU 95±2A 90 180 550 350

TB-75AM 80±2A 35 55 850 130

TB-82AULN 80±2A 35 55 800 140

TB-85AUN 85±2A 50 70 700 190

TB-85ACU 85±2A 50 100 550 250

TB-85AHU 85±2A 50 100 600 290

TB-90AUHN 90±2A 70 100 550 400

TB-90AUHN 90±2 70 100 550 400

9

TPU Applicable for Breathable Film

Application CharacteristicsTPU film material is applied to shoes products, clothes, medical supplies, industrial goods and baby products.

Water vapor permeabi l i ty type, excel lent water resistance, nice touch. Good physical properties and elasticity. The fluidity is good, well controlled viscosity, good workability etc.

Specifications





Tensile strength

(Kgf/cm2)

Test Method ASTM D-2240


EB-87AT 87±2A 70 110 550 400

EB-92AT 92±2A 80 120 550 410

BE-5038E 85±2A 50 90 600 300

BE-5059E 90±2A 55 100 550 320

BE-5077E 87±2A 50 100 600 300


+ Suggested drying temperature and time：Hopper inlet air temperature should be 90°–110°C X 2~4 hours.It adjusts according to the dried effect of desiccant dehumidifying hopper dryer.

+ The package specification of this series product are 25kg paper bags.

+ We can provide unique products according to each customer's requirement beyond the above categories.


10

Application CharacteristicsConveyor belt, sheet and film, air cushion, protection sleeve, extrusion,profile extrusion.

Good physical, good melt, good transparency,good flexibility, excellent abrasion resistance, good workability.

Specifications





Tensile strength

(Kgf/cm2)



EX-70AM 70±2A 40 100 500 250

CT-368 55±2A 20 55 700 90

EX-75AM 75±2A 50 120 500 260

ER-80AM 80±2A 60 150 450 300

EB-85AC 85±2A 75 170 850 330

EB-85AO 85±2A 80 175 750 360

EB-90AC 90±2A 100 220 650 370

EB-90AO 90±2A 95 230 700 400

EB-92AO 92±2A 105 200 600 400


+ Suggested drying temperature and time:Hopper inlet air temperature should be 90°–110°C X 2~4 hours.It adjusts according to the dried effect of desiccant dehumidifying hopper dryer. + The package specification of this series product are 25kg paper bags. + We can provide unique products according to each customer's requirement beyond the above categories.


TPU Applicable for Calendering

11



TPU Applicable for injection

Application CharacteristicsSeal ing c i rc le, outsoles and decorations of shoes, parts of sandal, parts of bicycle, sporting equipment, caster roller, dirt-proof boot, mobile phone case, phone keypad, animal ear tags, guide post, top life, gear.

Good physical propert ies, good t ransparency, good mel t , good process and workability, light color.


(Shore A/D) 100%

modulus(Kgf/cm2)



Tensile strength

(Kgf/cm2) Test Method ASTM

D-2240ASTM D-412 ASTM D-412 ASTM D-412 ASTM D-412

NX-60A 65±2A 20 35 900 280

NX-70A 70±2A 25 45 800 300

NX-80A 80±2A 60 140 800 360

NX-85A 85±2A 80 160 700 390

NX-90A 90±2A 100 200 650 410

NX-95A 95±2A 130 220 600 430

NX-95AC 95±2A 100 210 500 400

NX-98A 98±2A 160 250 500 450

NX-98AC 98±2A 140 230 450 420

NX-72D 70±2D 250 300 350 380

NB-98A 98±2A 110 180 400 350

NB-60D 60±2D 150 250 450 350

NB-65DU 65±2D 210 350 400 350

12




Application CharacteristicsHotmelt adhesive film,sealing tape, textile lamination,counter, toe puff

Good melt, well controlled viscosity, low melting point and good workability. Excellent bonding strength for fabrics, TPU, PVC and leather.

Specifications


TFB (℃ )

MI (2.16kg/150℃ ) (g/10mins)

Tack free time(min)


JIS K7311 ASTM D1238

CH-096 80±2A 115~125 30~45 3~5

CH-097 70±2A 98~105 20~30 8~10

CH-700 70±2A 85~95 50~80 6~8

CH-800 80±2A 108~116 10~25 6~8

CH-802 80±2A 108~116 30~50 3~5

CH-806 78±2A 110~120 60~90 3~5

CH-836 83±2A 120~130 9~16 3~5

CH-902 89±2A 108~116 50~80 3~5

CH-952 95±2A 85~100 5~15 (2.16kg/160℃ )

5~7

CH-603L 95±2A 50~60 15~30 3~5

CH-606 95±2A 65~75 1.5~4.5 3~5

CH-606L 95±2A 52~60 40~60 2~4

13


TPU Applicable for conveyor belt

Application

Application

Characteristics

Characteristics

footwear lamination, textile lamination


General type for solvent-based TPU adhesives, high crystallization rate, high green strength and good heat resistance after bonding. Excellent bonding strength for fabrics, TPU, PVC ,leather and Nylon.

Good physical, good melt, excellent abrasion resistance, good workability, low gel content, well low-temperature flexibility

Specifications


(Shore A/D) 100%

modulus(Kgf/cm2)

300% modulus

(Kgf/cm2)

Ultimate Elongation(%) Tensile strength (Kgf/cm2)

EB-85AC 85±2A 75 170 850 330

EB-85AO 85±2A 80 175 750 360

EB-90AC 90±2A 100 220 650 370

EB-90AO 90±2A 95 230 700 400

EB-92AO 92±2A 105 200 600 400

CP-125 83±2A 55 110 900 320

CP-126 92±2A 105 200 600 400

CP-127 90±2A 95 230 700 400

Item No. Max Toluene in solvents

Activation temperature

(℃ )

Crystallization rate

Tack Time PVC vs. PVC

Initial bonding strength

(PVC vs. PVC After 10 mins)

Heat resistance ( 70℃ , PVC vs. PVC )

Yellowing resistance Viscosity range 15% solid content in MEK (cps/25℃ )

CS-686L 25-30 55-65 very fast 5-10 8-13 ≦ 25 General 800-1200

CS-686 20-25 55-65 very fast 5-10 9-15 ≦ 20 General 1600-2200

CS-686H 15-20 55-65 very fast 5-10 10-16 ≦ 20 General 2600-3200

CS-608NL 25-30 55-65 very fast 5-10 5-8 ≦ 25 Non-Yellowing 800-1200

CS-608N 20-25 55-65 very fast 5-10 6-10 ≦ 20 Non-Yellowing 1600-2200

CS-608NH 15-20 55-65 very fast 5-10 8-12 ≦ 20 Non-Yellowing 2600-3200

14

+ Suggested drying temperature and time：These series of product can be directly processed, the particle into the oven not heating and drying

+ The package specification of this series product are 25kg paper bags. + We can provide unique products according to each customer's requirement beyond the above categories.


+ The Specific Gravity of this series product is between 1.19±0.02 + Suggested drying temperature and time：Hopper inlet air temperature should be 90°–110°C X 2~4 hours.It adjusts according to the dried effect of desiccant dehumidifying hopper dryer. + The package specification of this series product are 25kg paper bags. + We can provide unique products according to each customer's requirement beyond the above categories.



100% modulus

(Kgf/cm2)

300% modulus

(Kgf/cm2)

Ultimate Elongation(%) Tensile strength (Kgf/cm2)

EB-85AC 85±2A 75 170 850 330

EB-85AO 85±2A 80 175 750 360

EB-90AC 90±2A 100 220 650 370

EB-90AO 90±2A 95 230 700 400

EB-92AO 92±2A 105 200 600 400

CP-125 83±2A 55 110 900 320

CP-126 92±2A 105 200 600 400

CP-127 90±2A 95 230 700 400

Item No. Max Toluene in solvents

Activation temperature

(℃ )

Crystallization rate

Tack Time PVC vs. PVC

Initial bonding strength

(PVC vs. PVC After 10 mins)

Heat resistance ( 70℃ , PVC vs. PVC )

Yellowing resistance Viscosity range 15% solid content in MEK (cps/25℃ )

CS-686L 25-30 55-65 very fast 5-10 8-13 ≦ 25 General 800-1200

CS-686 20-25 55-65 very fast 5-10 9-15 ≦ 20 General 1600-2200

CS-686H 15-20 55-65 very fast 5-10 10-16 ≦ 20 General 2600-3200

CS-608NL 25-30 55-65 very fast 5-10 5-8 ≦ 25 Non-Yellowing 800-1200

CS-608N 20-25 55-65 very fast 5-10 6-10 ≦ 20 Non-Yellowing 1600-2200

CS-608NH 15-20 55-65 very fast 5-10 8-12 ≦ 20 Non-Yellowing 2600-3200

Insist Exceed Break through

Win-Win

The face of dynamic enviroment, CCIC sets up " being the leader of eco-resin products" as vision and "environmental safety and protection" as mission, insist on employee safety and product quality, we implement work safety discipline and strict control on production process. We exceed the current situation, actively involved in various products innovative efforts to develop environment friendly green products. We breakthrough all obstacles and "create value" for customers. The most important thing is getting "win-win" situation with our customers and protecting the environment.

www.coating.com.tw

The CCIC production various types of TPU, PU resin products are widely used in a variety of raw materials industry, and the livelihood sector. Everywhere you touched by your side,it's totally integrated into our lives.

If you need TPU resin products, please contact our staff to obtain the product catalog, or contact the company website

15

Insist Exceed Break through

Win-Win

The face of dynamic enviroment, CCIC sets up " being the leader of eco-resin products" as vision and "environmental safety and protection" as mission, insist on employee safety and product quality, we implement work safety discipline and strict control on production process. We exceed the current situation, actively involved in various products innovative efforts to develop environment friendly green products. We breakthrough all obstacles and "create value" for customers. The most important thing is getting "win-win" situation with our customers and protecting the environment.

www.coating.com.tw

The CCIC production various types of TPU, PU resin products are widely used in a variety of raw materials industry, and the livelihood sector. Everywhere you touched by your side,it's totally integrated into our lives.

If you need TPU resin products, please contact our staff to obtain the product catalog, or contact the company website

16

1. Packaging specifications: 25kg paper package

2. Store advice：It should be stored in sealed containers under cool and dry conditions

until used. Unused resin from opened containers or reground material that is not to be

used immediately should be stored in sealed containers.

Notice

Advice

0 1 Prior to processing, TPU must be completely dried in a desiccant dehumidifying hopper

dryer. Hopper inlet air temperature should be 90–110℃. To achieve the recommended

moisture content of less than 0.2%, the hopper capacity should be sufficient to provide a

minimum residence time of 2 hours. Over heating will cause TPU stick together, and long

time heating will cause TPU color change.

0 2 Thermoplastic polyurethane resins are hygroscopic and will absorb ambient moisture.

The presence of moisture can adversely affect processing characteristics and the quality

. Therefore, the resins should be stored in sealed containers and under cool and dry

conditions until used. Unused resin from opened containers or reground material that is

not to be used immediately should be stored in sealed containers.

0 3 The thickness of injection test sheet for hardness is 6mm, and the thickness of injection

test sheet for tensile force is 3mm. The above values are the averages after tempered

for 20 hours at 100℃for many times.

0 4 For thermoplastic polyurethane resin up to 10% regrind may be used with virgin material

, depending upon the end-use requirements of the molded part and provided that the

material is kept free of contamination and is properly dried. All regrind used must be

clean, uncontaminated, and thoroughly blended with virgin resin prior to drying and

processing. Degraded, discolored, or contaminated materials should not be used for

regrind, and this type of materials should be discarded in a proper way.

0 5 Operating condition data of the technical information obtained by the experimental

composite test our technical department, the actual data will vary due to manufacturers

of composite processing, raw materials, conditions and contents status, be sure to first

test is recommended prior to processing, verify that the productwhether the quality of

customer requirements, formal large-scale use.


w w w . c o at i n g . c o m . t w

17

1. Packaging specifications: 25kg paper package

2. Store advice：It should be stored in sealed containers under cool and dry conditions

until used. Unused resin from opened containers or reground material that is not to be

used immediately should be stored in sealed containers.

Notice

Advice

0 1 Prior to processing, TPU must be completely dried in a desiccant dehumidifying hopper

dryer. Hopper inlet air temperature should be 90–110℃. To achieve the recommended

moisture content of less than 0.2%, the hopper capacity should be sufficient to provide a

minimum residence time of 2 hours. Over heating will cause TPU stick together, and long

time heating will cause TPU color change.

0 2 Thermoplastic polyurethane resins are hygroscopic and will absorb ambient moisture.

The presence of moisture can adversely affect processing characteristics and the quality

. Therefore, the resins should be stored in sealed containers and under cool and dry

conditions until used. Unused resin from opened containers or reground material that is

not to be used immediately should be stored in sealed containers.

0 3 The thickness of injection test sheet for hardness is 6mm, and the thickness of injection

test sheet for tensile force is 3mm. The above values are the averages after tempered

for 20 hours at 100℃for many times.

0 4 For thermoplastic polyurethane resin up to 10% regrind may be used with virgin material

, depending upon the end-use requirements of the molded part and provided that the

material is kept free of contamination and is properly dried. All regrind used must be

clean, uncontaminated, and thoroughly blended with virgin resin prior to drying and

processing. Degraded, discolored, or contaminated materials should not be used for

regrind, and this type of materials should be discarded in a proper way.

0 5 Operating condition data of the technical information obtained by the experimental

composite test our technical department, the actual data will vary due to manufacturers

of composite processing, raw materials, conditions and contents status, be sure to first

test is recommended prior to processing, verify that the productwhether the quality of

customer requirements, formal large-scale use.


w w w . c o at i n g . c o m . t w

18

Date post:	09-Apr-2016
Category:	Documents
Upload:	rabbit-hsu
View:	225 times
Download:	3 times

Coating Chemical_TPU

Documents