15
Product Brochure Colibri II, Electric Pen Drive and Air Pen Drive Small Bone Cutting Tools
Product Brochure
Colibri II, Electric Pen Drive and Air Pen Drive
Small Bone Cutting Tools
Li-Ion
2 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 3
Colibri II
The combination of ergonomic design and suitable power for Small Bone and Sports Medicine surgeries.1
•High system modularity for more flexibility in the operating room2
•Intuitive design allowing easy handling of the system1
•Designed with particular focus on ergonomics and balance for high working comfort1
Electric Pen Drive (EPD)
The EPD platform offers high speed and precision for maxillofacialand extremity surgeries.3
•One electric-driven pen for drilling, burring, sawing, screwing and k-wires setting applications3
•Comprehensive portfolio of cutting tools designed to support surgical procedures3
•Foot pedal and hand switch options for more versatility during surgery3
Air Pen Drive (APD)
The APD platform offers high speed and precision for maxillofacialand extremity surgeries.3
•One air-driven pen for drilling, burring, sawing, screwing and k-wires setting applications3
•Comprehensive portfolio of cutting tools designed to support surgical procedures3
•Foot pedal and hand switch options for more versatility during surgery3
THE SMALL BONE CUTTING TOOLS ARE TAILORED TO THE FOLLOWING POWER TOOLS: SMALL BONE CUTTING TOOLS
A comprehensive portfolio covering a wide range of applications:
Sagittal Saw Blades
•Available with fine teeth and with coarse teeth for a suitable cutting performance4
Parallel Saw Blades
•The design enables parallel cuts in shortening osteotomies•Various cutting angles (45° or 90°) and shortening widths available
Oscillating Saw Blades
•Oscillating blades for crescentic osteotomies5
•Crescentic and 105° angled saw blades available
Large Oscillating Saw Blades
•Designed for the Tibia Plateau Leveling Osteotomy (TPLO) procedure•Compatible with TPLO systems
Reciprocating Saw Blades
• Comprehensive range of standard and application specific saw blades
Rasps and Broaches
•Straight and cross grinded rasps for rasping bone and broaches for intramedullary reaming
Burrs and Drill Bits
•Wide range of stainless steel, carbide or diamond-coated burrs
(see page 4)
(see page 8)
(see page 9)
(see page 10)
(see page 11–12)
(see page 13)
(see page 14–19)
4 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 5
For Colibri II
532.021 Oscillating Saw Attachment
Note: Sagittal Saw Blades are available sterile or non-sterile. To order non-sterile saw blades, use the article number from the tables below without “S”.
SAGITTAL SAW BLADES
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
532.041S 15.0 6.0 0.4
532.042S
15.0 10.0 0.4
532.043S
15.0 16.0 0.4
532.044S
18.0 4.0 0.4
532.045S
22.0 8.0 0.4
532.046S
22.0 12.0 0.4
532.047S
31.0 6.0 0.4
532.048S 31.0 10.0 0.4
FINETEETH
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
532.061S 27.0 6.0 0.6
532.062S 27.0 10.0 0.6
532.063S 27.0 14.0 0.6
532.064S 50.0 10.0 0.6
532.065S 50.0 14.0 0.6
532.066S 50.0 20.0 0.6
532.067S 50.0 27.0 0.6
COARSETEETH
6 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 7
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.314S
18.0 2.5 0.38
03.000.300S
18.0 4.0 0.38
03.000.301S
15.0 6.0 0.38
03.000.302S
31.0 6.0 0.38
03.000.303S
22.0 8.0 0.38
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.304S
15.0 10.0 0.38
03.000.305S
31.0 10.0 0.38
03.000.306S
22.0 12.0 0.38
03.000.307S
15.0 16.0 0.38
FINETEETH
FINETEETH
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.308S
27.0 6.0 0.6
03.000.309S
27.0 10.0 0.6
03.000.310S
27.0 14.0 0.6
03.000.315S 43.0 20.0 0.6
COARSETEETH
Sagittal Saw Blades
For EPD and APD
05.001.039 Sagittal Saw Attachment
05.001.183 Sagittal Saw Attachment, centred
05.001.182 Sagittal Saw Attachment, 90°
Note: Sagittal Saw Blades are only available sterile.
70 mm
8 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 9
PARALLEL SAW BLADES
Article No. Shortening Cut
532.081S 2.0 90˚
532.082S 2.5 90˚
532.083S 3.0 90˚
532.084S 4.0 90˚
532.085S 5.0 90˚
532.091S 2.0 45˚
532.092S 2.5 45˚
532.093S 3.0 45˚
532.094S 4.0 45˚
532.095S 5.0 45˚
For Colibri II
532.021 Oscillating Saw Attachment
Note: Parallel Saw Blades are only available sterile and for single use.
FINETEETH
OSCILLATING SAW BLADES
For Colibri II, EPD, APD
532.023 Oscillating Saw Attachment II for Colibri II
05.001.038 Oscillating Saw Attachment, for EPD and APD
05.001.121 Guide for Kirschner Wire, for Oscillating Saw, for EPD and APD
Note: Oscillating Saw Blades are only available sterile.
Crescentic Saw Blades
Usable length [mm]
Blade width (mm)
Cut thick ness (mm)
Diameter (mm)
03.000.311S 26.5 13.3 0.6 18.0
03.000.312S 25.0 16.3 0.6 22.0
03.000.313S
30.0 17.9 0.6 18.0
03.000.316S 30.0 21.9 0.6 22.0
105° Angled Blades intra-oral
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
Usable shank length (mm)
03.000.340S
7.0 11.5 0.38 70
03.000.341S
12.0 11.5 0.38 70
03.000.342S
12.0 9.5 0.38 70
03.000.343S 12.0 4.5 0.38 70
11 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 11
LARGE OSCILLATING SAW BLADES
For Colibri II
532.026 Large Oscillating Saw Attachment
532.027 Spare Key, for No. 532.026 and 511.802
Note: Large Oscillating Saw Blades are only available non-sterile.
Article No.
Radius
Usable length (mm)
Cut thickness (mm)
03.000.390 12.0 45.0 0.6
03.000.391 15.0 45.0 0.6
03.000.392 18.0 45.0 0.6
03.000.393 21.0 45.0 0.6
03.000.394 24.0 45.0 0.6
03.000.395 27.0 50.0 0.6
03.000.396 30.0 50.0 0.6
RECIPROCATING SAW BLADES
For EPD and APD
05.001.040 Reciprocating Saw Attachment
Note: Reciprocating Saw Blades are only available sterile.
Reciprocating Saw Blades
Usable length [mm]
Blade height (mm)
Cut thickness (mm)
03.000.320S 13.0 6.4/2.9 0.6
03.000.321S 20.0 6.4/2.9 0.6
03.000.322S 7.0 4.0 0.6
03.000.323S 14.0 6.4 0.6
03.000.324S 13.5 4.0 0.6
03.000.325S 25.0 5.5 0.6
03.000.326S 27.0 6.4 0.6
03.000.327S 27.0 6.4/2.9 0.6
03.000.328S 33.5 6.4 0.6
03.000.329S 34.5 5.0/2.5 0.6
03.000.330S 33.5 6.4 0.6
03.000.331S 33.5 6.4 0.6
03.000.332S 33.5 6.4 0.6
12 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 13
Elongated Reciprocating Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.334S 20.0 6.4/2.9 0.6 LeFort IOsteotomy,Rhinoplasty
03.000.335S 27.0 6.4/2.9 0.6 LeFort IOsteotomy,Rhinoplasty
Thin Reciprocating Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.336S 13.0 3.2 0.4 Intra-dental
03.000.337S 20.0 3.2 0.4 Intra-dental
I.B.O. Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.338S
9.2 7.4 0.5 Left-BSSO
03.000.339S 9.2 7.4 0.5 Right-BSSO
RASPS AND BROACHES
For EPD and APD
05.001.040 Reciprocating Saw Attachment
Note: Rasps and Broaches are only available sterile.
Rasps
Usable length [mm]
Rasp height (mm)
Cut thickness (mm)
Design, special appli-cation
03.000.360S 11.0 5.0 – Cross- grinding,for Rhinoplasty
03.000.361S 14.0 7.0 – Cross- grinding,for Rhinoplasty
03.000.362S 11.0 5.0 – Straight- grinding, for Rhinoplasty
03.000.363S 14.0 7.0 – Straight- grinding, for Rhinoplasty
Broaches
Usable length [mm]
Broach height (mm)
Cut thickness (mm)
Design, special appli-cation
03.000.364S 19.0 4.5 4.5 Interpha langealjoint replace-ment, proximal
03.000.365S 16.0 6.0 6.0 Interpha langealjoint replacement, distal
Reciprocating Saw Blades
2
14 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 15
BURRS AND DRILL BITS
For Colibri II, EPD, APD
05.001.187 Burr Attachment, for Colibri II
Burr Attachments, for EPD and APD
05.001.045 Size S, length 43 mm 05.001.046 Size M, length 68 mm 05.001.047 Size L, length 93 mm
Burr Attachments, angled, for EPD and APD
05.001.048 Size S, length 66 mm 05.001.049 Size M, length 91 mm 05.001.050 Size L, length 116 mm 05.001.063 Size XL, length 186 mm 05.001.055 Size XXL, length 333 mm
05.001.074 Handle for Change of Instruments, for EPD/APD Attachments
Note: Burrs are only available sterile.
Round burrs 03.000.XXXS
Diameter (mm) Size S Size M Size L Marking
1.0 000 001 002 A
1.5 003 004 005 B
2.0 230 231 232 B
2.5 006 007 008 C
3.0 009 010 011 C
4.0 012 013 014 D
5.0 015 016 017 D
6.5 018 019 020 E
8.0 021 022 023 E
Round burrs diamond-coated 03.000.XXXS
Diameter (mm) Size S Size M Size L Marking
1.0 030 031 032 A
1.5 033 034 035 B
2.0 036 037 038 B
2.5 039 040 041 C
3.0 042 043 044 C
3.5 045 046 047 D
4.0 048 049 050 D
5.0 051 052 053 D
6.0 054 055 056 D
Important:• The Burr Attachment for Colibri II (05.001.187)
can only be used with burrs of size M and L. Burrs of size S cannot be used with these systems.
• When using the Burr Attachments for EPD and APD, the size of the attachment must correspond to the size of the burr (e.g. attachment size S with burr size S) or to one size bigger (e.g. attachment size S with burr size M).
• The Burr Attachments, angled, for EPD and APD size XL (05.001.063) and XXL (05.001.055), must be used with burrs of size L.
• The marking on the burr (letters A to E) indicates the recommended speed for the respective burr. These markings can be used when working with the EPD using the speed adjustment feature of the console. For further information, refer to the chapter Speed Regulation in the IFU of the EPD.
Points of measurement (length)
Marking Console Speed Regulation Setting EPD Pen 60k
A 100%
B 100%
C 75%
D 50%
E 25%
2
2
2
16 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 17
Acorn burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
5.0 6.7 233 234 235 D
6.0 8.0 060 061 – D
9.0 11.4 – 067 – E
Egg-shaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 8.0 070 071 072 D
5.5 10.0 073 074 075 D
Pear-shaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 6.9 236 237 238 D
5.0 8.3 076 077 078 D
6.0 9.7 – 080 – D
Barrel-shaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 9.0 – 240 241 D
5.0 10.0 – 083 084 D
Fissure burrs, tapered Carbide 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.0–1.6 4.5 085 086 087 A
1.6–2.3 5.2 088 089 090 B
2.1–2.6 6.8 091 092 – B
Fissure burrs, cylindrical Carbide 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.6 4.3 094 095 – B
3.0 16.0 – 098 – C
Drum burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.7 7.9 – – 247 D
6.0 7.9 – – 105 D
Circular burrs diamond-coated 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
25.0 0.7 109 110 111 E
Lindemann reamers 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.8–2.3 20.2 112 113 114 D
Swanson burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
2.0 6.3 115 116 – B
3.0 9.7 118 119 – C
4.0 12.7 – 122 – D
Pin-shaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.1–1.4 6.0 – 128 – A
1.5–2.1 12.0 – 131 – B
Burrs and Drill Bits
6.5 mm
Point of measurement (length)
18 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 19
BURRS FOR CRANIOTOME ATTACHMENT
For EPD and APD
05.001.059 Craniotome Attachment 05.001.051 Dura Guard Size S, length 19.6 mm 05.001.052 Dura Guard Size M, length 23.6 mm 05.001.053 Dura Guard Size L, length 32.6 mm
Note: Burrs are only available sterile.
Cranial burrs 03.000.XXXS
Diameter (mm)
Usable Head Length (mm)
Dura Guard Size S
Dura Guard Size M
Dura Guard Size L Marking
1.2–1.8 11.0 124 – – A
1.3–2.2 16.0 – 125 – B
1.7–3.0 25.0 – – 126 B
Neuro burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.7 2.3 – 134 – B
2.2 3.7 – 137 138 C
2.9 3.8 – 140 141 C
Drill bits 03.000.XXXS
Diameter (mm)
Length of cutting flutes (mm)
Size S
Size M
Size L Marking
1.0 12.0 – 143 – A
1.1 12.0 – 145 – A
1.3 12.0 – 147 – A
1.5 12.0 148 149 – B
2.0 12.0 150 151 – B
2.5 12.0 152 – C
Wire pass drills03.000.XXXS
Diameter (mm)
Length of cutting flutes (mm)
Size S
Size M
Size L Marking
1.1 5.0 154 155 – A
1.5 7.0 156 157 – B
2.0 7.0 – 159 – B
Burrs and Drill Bits
21 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 21
Round burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
3.0 3.0 170 171 Mini-Quick
5.0 5.0 – 172 Mini-Quick
Egg-shaped burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
7.0 11.0 173 174 Mini-Quick
8.0 4.8 – 176 Mini-Quick
Pear-shaped burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
5.0 8.3 184 185 Mini-Quick
6.0 9.7 – 188 Mini-Quick
Conical burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
5.0 8.3 178 179 Mini-Quick
6.0 9.7 181 182 Mini-Quick
BURRS WITH MINI QUICK AND J-LATCH COUPLING
For EPD and APD Note: Burrs are only available sterile.
BURRS FOR PERFORATOR
For EPD and APD
05.001.054 Perforator 05.001.096 Protection Sleeve for Trepan Burr Ø 7.0 mm 05.001.097 Protection Sleeve for Trepan Burr Ø 12.0 mm
Note: Trepan Burrs are available sterile or non-sterile. To order non-sterile articles, use the article number from the tables below without “S”.
Trepan burrs 03.000.XXX 03.000.XXXS
Diameter (mm)
Protection Sleeve05.001.096
Protection Sleeve05.001.097
7.0 350 –
12.0 – 351
22 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 23
Fissure burrs, tapered 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
1.0–2.1 11.3 189 190 Mini Quick
1.6–3.2 12.0 191 192 Mini Quick
Circular burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm) Coupling Type
15.0 1.0 196 Mini Quick
Lindenmann burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length(53 mm) Coupling Type
2.0–2.3 35.0 197 Mini Quick
2.0–2.3 35.0 227 j-latch
Burrs with Mini Quick and J-Latch Coupling
SHANNON AND WEDGE BURRS, WITH ROUND SHAFTS, 2.35 MM
For EPD and APD
05.001.128 Drill/Burr Attachment, Straight, for Round Shafts 2.35 mm
Note: Burrs are only available sterile.
Shannon burrs* 03.228.XXXS
Description
Diameter (mm)
Usable Length (mm)
Overall Length ( mm)
03.228.013S Shannon Burr, Short, Helical Flute
2.0 8.0 65
03.228.014S Shannon Burr, Medium, Straight
2.0 11.8 65
03.228.015S Shannon Burr, Medium, Helical Flute
2.2 12 65
03.228.016S Shannon Burr, Long, Straight
2.2 20 75
03.228.017S Shannon Burr, Long, Straight
3.1 20 70
Wedge burrs* 03.228.XXXS
Description
Diameter (mm)
Usable Length (mm)
Overall Length ( mm)
03.228.011S Wedge Burr 2.9 13.2 65
03.228.012S Wedge Burr 4.3 13 65
* The legal manufacturer of the Shannon and Wedge Burrs with round shaft, 2.35 mm is Gebr. Brasseler GmbH & Co. KG Germany. The burrs are distributed by Synthes GmbH.
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.37103.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
24 DePuy Synthes Small Bone Cutting Tools Product Brochure Small Bone Cutting Tools Product Brochure DePuy Synthes 25
DRILL BITS WITH STOP INTEGRATED IRRIGATION
For EPD and APD
Drill Attachment, 90°
05.001.035 short 05.001.036 long
Note: Drill Bits with Stop are only available sterile.
For EPD
05.001.006 Standard Console with Irrigation 05.001.178.01S Irrigation Tube Set, sterile, single pack 05.001.179.05S Clips for Irrigation Tube Set, sterile, pack of 5 units
Drill Bits with StopDiameter (mm)
Usable Length (mm) Coupling Type
03.000.384S 1.0 18.0 Mini Quick
03.000.376S 1.1 18.0 Mini Quick
03.000.377S 1.5 6.0 Mini Quick
03.000.379S 1.5 18.0 Mini Quick
03.000.383S 2.0 18.0 Mini Quick
Irrigation Nozzles Burr Attachments: Description
05.001.066 Irrigation Nozzle, for Burr Attachments, size S, Nos. 05.001.045 and 05.001.048
05.001.067 Irrigation Nozzle, for Burr Attachments, size M, for Nos. 05.001.046 and 05.001.049
05.001.068 Irrigation Nozzle, for Burr Attachments, size L, for Nos. 05.001.047 and 05.001.050
05.001.065 Irrigation Nozzle, for Burr Attachment, size XL, No. 05.001.063
05.001.122 Irrigation Nozzle, for Burr Attachment, size XXL, No. 05.001.055
Irrigation Nozzles Saw Attachments: Description
05.001.070 Irrigation Nozzle, for Sagittal Saw Attachment, No. 05.001.039
05.001.185 Irrigation Nozzle for EPD and APD, for No. 05.001.183
05.001.184 Irrigation Nozzle, for Sagittal Saw Attachment, 90°, No. 05.001.182
05.001.071 Irrigation Nozzle, for Reciprocating Saw Attachment, No. 05.001.040
Irrigation Nozzles Perforator Attachments Description
05.001.076 Irrigation Nozzle, for Perforator, No. 05.001.054
05.001.180 Irrigation Nozzle, for Perforator with Hudson Coupling, No. 05.001.177
Irrigation Nozzle Drill Drill Attachments Description
05.001.111 Irrigation Nozzle, for EPD and APD, for Drill Attachments Nos. 05.001.030, 05.001.031, 05.001.032 and 05.001.110
Not all products are currently available in all markets.Please contact your DePuy Synthes sales representative for more information. Prior to ordering cutting tools please check the exact dimension. This brochure is for guidance only and subject to change. This publication is not intended for distribution in the USA. For full user instructions, warnings and precautions please consult the IFU of any additional devices used. All Synthes implant instructions for use as well as other instructions for use are available as PDF files at www.e-ifu.com. For cutting tools with Legal Manufacturer Gebr. Brasseler GmbH &Co. KG see package Insert(s). ©
DeP
uy S
ynth
es P
ower
Too
ls, a
div
isio
n of
Syn
thes
Gm
bH. 2
020.
A
ll rig
hts
rese
rved
.11
1182
-200
220
05/
2020
Distributed in OUS by:Synthes GmbHEimattstrasse 34436 OberdorfSwitzerlandTel: +41 61 965 61 11
Shannon and Wedge Burrs with round shaft, 2.35 mm:The legal manufacturer is Gebr. Brasseler GmbH & Co. KG Germany. The burrs are distributed by Synthes GmbH.
Gebr. Brasseler GmbH &Co. KGTrophagener Weg 2532657 Lemgo - Germany
Synthes GmbHEimattstrasse 34436 OberdorfSwitzerlandTel: +41 61 965 61 11www.jnjmedicaldevices.com
References:
1. DePuy Synthes Power Tools. Clinical Evaluation Report 2019 Ref. 0000282023, Market Research Study 2012 Ref. 0000265032 and 0000264813
2. DePuy Synthes Power Tools. Clinical Evaluation Report 2019 Ref. 0000282023
3. DePuy Synthes Power Tools. Clinical Evaluation Reports 2019 Ref. 0000211619 and 0000251062
4. DePuy Synthes Power Tools. Clinical Evaluation Report 2019 Ref.0000229795
5. DePuy Synthes Power Tools. Clinical Evaluation Report 2019 Ref. 0000229795 and Design Drawing SM_119162
