Date post: | 03-Jun-2018 |
Category: |
Documents |
Upload: | kriston-edward |
View: | 227 times |
Download: | 0 times |
of 29
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
1/29
ISO13485:2003 VS
ISO 9001:2000Ritesh Chintakuntla
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
2/29
Why not adopt ISO 9001:2000 ?
!
The Medical Device Industry did not agree with allthe changes to ISO 9001:2000
! Harmonizing with the QSR (GMP) requirements
! ISO 9001:2000 places an emphasis on ContinualImprovement and Customer Satisfaction! Harmonizing EN 4600X Standards with ISO 13485
!
Not user friendly
! Lacked Process orientation
!
Could not tailor ISO to scope of registration(service)
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
3/29
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
4/29
ISO 13485 Series Standards - QMS
! ISO 9000: Quality management system fundamentals and
vocabulary
! Except as noted in section 3 of 13485
! ISO 13485: Quality Management System Requirements
! combines ISO 13485 and 13488
! limitations will be indicated on certificate
! ISO/TS 14969: Quality Management Systems-Medical
Devices-Guidance on the Application of ISO 13485
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
5/29
What has Changed?
ISO13485 now has a totally new structure,
! 20 elements is too linear,
! Adopted process approach
! Emphasis is now on regulatory requirements for a quality management
system rather than a quality assurance system.
! Increased attention to production of a conforming product and delivery of
a conforming service is included in and is part of the quality management
system.
! There is now only one management system requirement standard, i.e.
ISO
13485, where previously there were two requirement standards: ISO
13485 and ISO 13488.
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
6/29
2003 Changes Continued
! Went from 20 elements to 8! Elements 4-8 contain all the requirements
! Emphasis on Consistency through Documentation
! Does Allow for permissible exclusions
! Exclusions need justification!
! Organization replaces supplier to refer to the company
implementing the standard
! Supplier replaces subcontractor when referring to
companies that your company purchases goods andservices from
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
7/29
2003 Changes - Continued
! Top Management must be involved in establishing andcommunicating the purpose and direction of theorganization
! The management system begins and ends with objectives
established by Top management!
Top management responsibility for profit or loss*
! Top Management needs to create an atmosphere inwhich people are not afraid to become involved, anddesire to help the company meet its goals andobjectives
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
8/29
Why Cant the FDA change Part 820 to
harmonize it with 9000:2000
! The FDA and medical device regulators take issue with following ISO9001:2000 philosophies:
! Customer Satisfaction- goes above and beyond the safety and efficacyof medical devices. Evaluating customer satisfaction beyond safety isnot FDAs purpose
! Continuous Improvement- done simply for the sake of operating moreefficiently is outside the scope of medical device regulatory agencies.
! Documentation- documentation is needed to know what a companyintends to do and what they actually did- ISO 9001:2000 requires lessdocumentation than does 13485:2003
! Process Approach- FDA does not feel its necessary for companies tochange the structure of their documentation.
! FDA is assuming the purpose of the change in ISO is a change indocumentation and that companies do not already use the processapproach.
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
9/29
FDA/QSR harmonization with the ISO Standards
! The FDA is planning on some level of harmonization with
ISO 13485 in late 2002 early 2003.
! Provided that ISO 13485 will remain more true to the medical
device/regulatory viewpoint
! Many other countries rely on ISO standards in regulatingmedical devices.
! Promotes International Consistency.
! FDA and device regulatory agencies from other countries
can more readily rely on one another's inspections andexchange inspection reports if the quality system
requirements are similar.
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
10/29
Why Would Medical Device Manufacturers want to maintain ISO
9001:2000 Certification as well as 13485:2003
! Customers (Doctors, Hospitals, OEMs) perceive a level of
security in knowing they are buying from a manufacturer that
has an ISO 9001 certified system.
! Helps companies obtain product certification CE mark,
! Companies do not have to be ISO certified to get CE Mark
! Depending on the product or service companies could opt for
ISO 17025
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
11/29
Permissible Exclusions - Allowable
! (7.5.3) Identification and traceability - only partially
applicable where there is no specific traceability requirementfor the organizations product
! (7.5.2) Customer property - Nothing is provided from thecustomer to the supplier in the realization of its products or
processes
! (7.6) The organizations needs no measuring and test equipmentto provide evidence of conformity
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
12/29
Differences
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
13/29
Guidance standards
ISO 14969:200X will be the guidance document for
implementation to 13485:2003
!Section 3 of ISO 13485 has additional Terms and
Definitions not included in ISO 9000:2000
ISO 9000:2000 and ISO 9004:2000 used as consistent
pair
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
14/29
Differences: Section 4.1
! 13485: "Maintain the Effectiveness of these
processes"
! Records that you are meeting requirements and statedobjectives
! 9001:2000: Continual Improvement of these
Processes
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
15/29
Differences: Section 4.2.3
! Organization must define the period for retention of
obsolete documents
! Duration must be for the life of the device
!
or as specified by relevant regulatory requirements(GMP/GLP)
! 9001:2000 Does not specify retention times
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
16/29
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
17/29
Differences: Section 5
! Section 5.1 of 13485:2003 does not require "Continually
Improving its effectiveness"
! ISO 9001:2000 does.
! Section 5.2 of 13485:2003 focus is on meeting the customers
needs! 9001:2000 is focused on meeting and exceeding the customers needs.
! Section 5.3 of 13485:2003 emphasizes maintaining the system
! 9001:2000 talks about continual improvement
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
18/29
Differences: Section 6
! Section 6.2.2 of 13485:2003 Requires a procedure
for training where as ISO 9001:2000 does not.
! Section 6.4 Work Environment of 13485:2003 is
more detailed (i.e. health records, cleanliness ofclothing and personnel, environmental
monitoring) than the same section in 9001:2000
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
19/29
Differences: Section 7
! Section 7.3 Design and Development of 13485:2003references ISO 14971 (Risk Analysis) 9001:2000 does not.
! Section 7.5.1 of 13485:2003 has added sub-clause G, whichtalks about packaging and labeling.
!
Section 7.5.1.1 Cleanliness of Product and contaminationcontrol (Cleaning of product) is added for 13485:2003
! Section 7.5.1.2 Installation (Installing the Device) is added for13485:2003
! Section 7.5.1.3 Servicing (After the Device is installed) is
added for 13485:2003
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
20/29
Differences: Section 7 - contd
! Section 7.5.2 Validation of processes for production and service
provision- additional requirements for 13485:
! The organization shall establish and maintain documented procedures for
the validation of the application of computer software (and changes to
such software and/or its application) for production and service
operations and measuring and monitoring operations (see 8.2) that affectthe ability of the product to conform to specified requirements. Such
software applications shall be validated prior to initial use. The results of
validation shall be recorded (see 4.2.4).
Particular requirement for sterile medical devices:
!
The organization shall subject the medical device to a validatedsterilization process and record all the process parameters of the
sterilization process (see 4.2.4).
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
21/29
Differences: Section 7 - contd!
Section 7.5.3 Identification and Traceability- additional requirements for13485:
! Particular requirements for active implantable medical devices and
implantable medical devices:
! a) When defining the extent of traceability, the organization shall include
all components and materials used, and records of the environmentalconditions when these could cause the medical device not to satisfy its
specified requirements.
! b) The organization shall require that its agents or distributors maintain
records of the distribution of medical devices with regard to traceability
and that such records are available for inspection.
! c) The organization shall ensure that the name and address of the
shipping package consignee is recorded (see 4.2.4).
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
22/29
Differences: Section 7 - contd
Section 7.5.5 Preservation of product-
additional requirements for 13485:
! The organization shall establish and maintain documented
procedures for the control of product with a limited shelf-lifeor requiring special storage conditions. Such special storage
conditions shall be controlled and recorded. (FIFO)
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
23/29
Differences: Section 8
! Section 8.1 Measurement, analysis and
Improvement- additional Requirements for 13485:
! If statistical techniques are used, organization shall establish andmaintain documented proceduresto implement and control their
application.
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
24/29
Differences: Section 8 - contd
!Section 8.2.1 Customer Feedback-
Additional Requirements for 13485:! The organization shall establish and maintain a documented feedback
system to provide early warning of quality problems and for input into the
corrective and preventive action system [see 7.2.3c)].
! If regulations require the organization to gain experience from the post-
production phase, the review of this experience shall form part of the
feedback system (see 8.5.1).
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
25/29
Differences: Section 8 - contd
Section 8.2.4 Monitoring and measurement of Product- additional requirements for
13485:
!Particular requirement for active implantable devices and implantable devices:
!The organization shall record (see 4.2.4) the identity of personnel performing anyinspection or testing.
Section 8.3 Control of nonconforming product- additional requirements for 13485:
!If product needs to be reworked (one or more times), the organization shall document
the rework in a work instruction that has undergone the same authorization andapproval procedure as the original work instruction. Prior to authorization and
approval, a determination of any adverse effect of the rework upon product shall be
made and documented.
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
26/29
Requirements for Documents 92K
!
ISO 9001:2000 requires a minimum of 6 procedures.
! Quality Manual
! 4.2.3 Control of Documents
! 4.2.4 Control of Records! 8.2.2 Internal Audit
! 8.5.2 Corrective Action
! 8.5.3 Preventive Action
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
27/29
Requirements for documents 13485
ISO 13485:2003 requires a minimum of 19 procedures!
! Quality Manual
! 4.2.3 Control of Documents
! 4.2.4 Control of Records
! 6.2.2 Competence, awareness and training
!
7.3 Design and Development
! 7.4.1 Purchasing Process
! 7.5.1.2 Installation activities (if applicable)!
7.5.1.3 Servicing activities (when required)
! 7.5.3.1 Identification
! 7.5.3.2 Traceability
! 7.5.5 Preservation of Product
! 7.6 Control of Measuring and Monitoring Devices
! 8.1 Statistical Techniques (if used)
! 8.2.2 Internal Audits
! 8.3 Control of nonconforming product
! 8.4 Analysis of Data
! 8.5 Improvement
!
8.5.2 Corrective Action
! 8.5.3 Preventive Action
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
28/29
ISO 13485:2003 Certification = Certification to ISO
9001:2000???
! ISO 13485 is a stand alone standard
! It is basedon ISO 9001:2000.
! Primary objective of ISO13485 is to facilitate harmonized medicaldevice regulatory requirements.
!
Includes some particular requirements for medical devices andexcludes some of the ISO 9001:2000 requirements
!
These exclusions prevent users from claiming conformity withISO9001:2000!
8/11/2019 Comparison ISO 9000_2000 vs ISO 13485_2003
29/29
Thanks for reading!!!Feedback Welcome.