+ All Categories
Home > Business > Comprehensive Power TeraTorq Drive and Control modules

Comprehensive Power TeraTorq Drive and Control modules

Date post: 18-Nov-2014
Category:
Upload: jeffsable
View: 1,214 times
Download: 0 times
Share this document with a friend
Description:
The most advanced modular drive system available. Providing power and control for applications including Drilling, Marine Propulsion, Military, and Microgrid systems.
12
POWER IT UP. The Most Advanced Modular Drive System
Transcript
Page 1: Comprehensive Power TeraTorq Drive and Control modules

POWER IT UP.

The Most Advanced Modular Drive System

Page 2: Comprehensive Power TeraTorq Drive and Control modules

The Most Advanced Modular Drive System

The image on the right features multiple racks of TIM-270s, or TIMs (TIMs are TeraTorq® Inverter Modules).

Page 2 1/8/2013 Comprehensive Power Proprietary

Page 3: Comprehensive Power TeraTorq Drive and Control modules

TIMs

200 kW / 250 Hp power conversion and control “building blocks”, typically deployed in arrays

TIM-270 modules are fully interchangeable with each other, reducing the number of spare parts you need to stock. Any TIM can be perform:

AC/DC Rectification

DC/AC Inversion

DC/DC Power Balancing

TIMs are used to: Drive motors

Transfer power from a generator or other source

Transfer power to/from a switchboard or a battery bank

Page 3 1/8/2013 Comprehensive Power Proprietary

Page 4: Comprehensive Power TeraTorq Drive and Control modules

TIMs

Designed for durability and for continuous, fail-safe operation, even in the unlikely event of a component failure

The failure of a TIM-270 in a multiple TIM-270 system only decreases the system power proportionately

Such a failure will still yield continued system operation and avoid emergency equipment shutdown

TIM-270 modules can safely and easily be swapped or replaced by anyone; no factory certification or special training is required. Replacing a TIM-270 is a simple “plug and play” operation.

Page 4 1/8/2013 Comprehensive Power Proprietary

Page 5: Comprehensive Power TeraTorq Drive and Control modules

TFMs (TeraTorq® Frame Modules)

Frames hold up to 4 TIMs

All module connections are blind mate quick disconnect for safe and foolproof operation and maintenance

Page 5 1/8/2013 Comprehensive Power Proprietary

Page 6: Comprehensive Power TeraTorq Drive and Control modules

TCM (TeraTorq® Control Module)

Controls the operation of TIMs, which are connected to motors, generators, etc

Provides information to/from a system controller via the Modbus Application Protocol (MBAP) over an Ethernet TCP/IP connection

Page 6 1/8/2013 Comprehensive Power Proprietary

Page 7: Comprehensive Power TeraTorq Drive and Control modules

Example Drive Lineup for Hybrid Drill Rig

Page 7 1/8/2013 Comprehensive Power Proprietary

Page 8: Comprehensive Power TeraTorq Drive and Control modules

Example Drive Lineup for Diesel Electric Tug Boat

Page 8 1/8/2013

EcoMarine Propulsion Systems Corp. Proprietary

Page 9: Comprehensive Power TeraTorq Drive and Control modules

FAQs

Can I use TIM drive lineups with motors or generators that are not manufactured by Comprehensive Power?

Yes you can (although we would like you to consider all of our equipment, including our motors and generators, you are not required to do so).

Can a TIM really be replaced by non-factory personnel?

Yes. Push the red button and pull the handle.

Can I use my own housing for my TIMs, TFMs, and TCMs?

Yes. We do sell our TD800 rack system which houses up to 3 TFMs, and up to 12 TIMs, but we will assist your design efforts and support the deployment of the equipment within your own rack system.

Page 9 1/8/2013 Comprehensive Power Proprietary

Page 10: Comprehensive Power TeraTorq Drive and Control modules

FAQs (con’d)

If a TIM fails, does my system need to be restarted?

No. In the unlikely event of a TIM failure, the remaining TIMs will continue to operate, and the drive lineup will have proportional power available.

Does a TIM need to be programmed or require a hardware modification to perform an AC/DC conversion or another function?

No. Any TIM can perform any function, and any TIM can be placed in any TFM slot. The TIM’s function is controlled by a TCM which is part of the drive lineup.

Can this drive and control system function as a Microgrid?

Yes. TIM systems support power being supplied from one or multiple sources, including transformers, generators and battery banks. Power can be distributed to multiple loads, including hotel loads, MCCs, motors and battery banks.

Page 10 1/8/2013 Comprehensive Power Proprietary

Page 11: Comprehensive Power TeraTorq Drive and Control modules

Page 11 1/8/2013 Comprehensive Power Proprietary

About Comprehensive Power

Comprehensive Power is a leading designer and manufacturer of high-performance permanent magnet motors, generators, controls and drives.

We provide solutions to the drilling, military, marine propulsion and renewable energy industries.

Founded in 1998, located in 40,000 square feet across 3 facilities in Marlborough, MA

We Invent and Produce Unique Solutions

Page 12: Comprehensive Power TeraTorq Drive and Control modules

Page 12 1/8/2013 Comprehensive Power Proprietary

Contact Me To Discuss Your System Requirements

Jeff Sable, Director Sales and Marketing (508) 460-0010 x706 [email protected]


Recommended