Page 1
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
RAMP UP (slope 1:10)
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
SEPTIC TANK 60 user
AutoCAD SHX Text
SOAK PIT
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
2500x1500mm wide hatch covered with checkered tiles
AutoCAD SHX Text
water tank below
AutoCAD SHX Text
W=1200 T= 300 R= 32equal parts
AutoCAD SHX Text
15%%C DROP(TYP)
AutoCAD SHX Text
32%%C DROP(TYP)
AutoCAD SHX Text
BORE HOLE
AutoCAD SHX Text
TO UNDERGROUD FILLING TANK IN BASEMNT
AutoCAD SHX Text
50 FROM DOMESTIC WATER TANKTO OHT TANK FILLING
AutoCAD SHX Text
50%%C DWS
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF GROUND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6050A
AutoCAD SHX Text
10477A-CV-819-6050AP0.dwg
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF GROUND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6050A
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 2
SOFA
2 - SEATER
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
1ST FLOOR PLAN
AutoCAD SHX Text
HUB ROOM 2050x1600
AutoCAD SHX Text
ELECTRICAL ROOM 2745X3165
AutoCAD SHX Text
MEETING ROOM 2600x2650
AutoCAD SHX Text
CONFERENCE ROOM 3600x2550
AutoCAD SHX Text
BMS ROOM 3200x2250
AutoCAD SHX Text
PA ROOM 2670X3500
AutoCAD SHX Text
DIRECTOR ROOM 3500X4650
AutoCAD SHX Text
RECORD ROOM 3200x1715
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
RECEPTION 5075X4580
AutoCAD SHX Text
WORKSTATIONS 4770 X 6420
AutoCAD SHX Text
MANAGER ROOM 3500X3000
AutoCAD SHX Text
LOBBY 3430X1950
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
FFL +5.10
AutoCAD SHX Text
FULL HT CABIN PARTITION (TYP)
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
GREEN WALL
AutoCAD SHX Text
T= 300 R= 150 W=1800
AutoCAD SHX Text
PL SHAFT 600X1500
AutoCAD SHX Text
TOILET 2590X1500
AutoCAD SHX Text
150MM LEDGE WALL
AutoCAD SHX Text
100MM WIDE UNDER COUNTER LEDGE WALL
AutoCAD SHX Text
40mm WASTE PIPE
AutoCAD SHX Text
110 SOIL PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
75 WASTE PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
DRAINAGE LAYOUT OF TYPICAL TOILET BLOCK
AutoCAD SHX Text
OF FIRST AND THIRD FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6051
AutoCAD SHX Text
10477A-CV-819-6051P0.dwg
AutoCAD SHX Text
DRAINAGE LAYOUT OF TYPICAL TOILET BLOCK
AutoCAD SHX Text
OF FIRST AND THIRD FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6051
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 3
SOFA
2 - SEATER
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
1ST FLOOR PLAN
AutoCAD SHX Text
HUB ROOM 2050x1600
AutoCAD SHX Text
ELECTRICAL ROOM 2745X3165
AutoCAD SHX Text
MEETING ROOM 2600x2650
AutoCAD SHX Text
CONFERENCE ROOM 3600x2550
AutoCAD SHX Text
BMS ROOM 3200x2250
AutoCAD SHX Text
PA ROOM 2670X3500
AutoCAD SHX Text
DIRECTOR ROOM 3500X4650
AutoCAD SHX Text
RECORD ROOM 3200x1715
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
RECEPTION 5075X4580
AutoCAD SHX Text
WORKSTATIONS 4770 X 6420
AutoCAD SHX Text
MANAGER ROOM 3500X3000
AutoCAD SHX Text
LOBBY 3430X1950
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
FFL +5.10
AutoCAD SHX Text
FULL HT CABIN PARTITION (TYP)
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
GREEN WALL
AutoCAD SHX Text
T= 300 R= 150 W=1800
AutoCAD SHX Text
PL SHAFT 600X1500
AutoCAD SHX Text
TOILET 2590X1500
AutoCAD SHX Text
150MM LEDGE WALL
AutoCAD SHX Text
100MM WIDE UNDER COUNTER LEDGE WALL
AutoCAD SHX Text
15%%C DROP(TYP)
AutoCAD SHX Text
32%%C DROP(TYP)
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF TYPICAL TOILET BLOCK
AutoCAD SHX Text
OF FIRST AND THIRD FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6051A
AutoCAD SHX Text
10477A-CV-819-6051AP0.dwg
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF TYPICAL TOILET BLOCK
AutoCAD SHX Text
OF FIRST AND THIRD FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6051A
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 4
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
ELECTRICAL ROOM 2475x3150
AutoCAD SHX Text
UPS /ELEC. ROOM 9920 x 6650
AutoCAD SHX Text
CANTEEN 7975x4080
AutoCAD SHX Text
LOBBY 4725x2900
AutoCAD SHX Text
LOBBY 2140x1900
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FFL +9.60
AutoCAD SHX Text
LOBBY 3430X1950
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
GREEN WALL
AutoCAD SHX Text
HUB ROOM 2050x1600
AutoCAD SHX Text
CONFERENCE ROOM 5000x2900
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
PL SHAFT 600X1500
AutoCAD SHX Text
TOILET 2590X1500
AutoCAD SHX Text
WATER DISPENSER
AutoCAD SHX Text
150MM LEDGE WALL
AutoCAD SHX Text
100MM WIDE UNDER COUNTER LEDGE WALL
AutoCAD SHX Text
T= 300 R= 150 W=1800
AutoCAD SHX Text
40mm WASTE PIPE
AutoCAD SHX Text
110 SOIL PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
75 WASTE PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
75 WASTE PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
UV + RO 3.5 Ltrs
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
DRAINAGE LAYOUT OF SECOND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6052
AutoCAD SHX Text
10477A-CV-819-6052P0.dwg
AutoCAD SHX Text
DRAINAGE LAYOUT OF SECOND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6052
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 5
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
ELECTRICAL ROOM 2475x3150
AutoCAD SHX Text
2nd FLOOR PLAN
AutoCAD SHX Text
UPS /ELEC. ROOM 9920 x 6650
AutoCAD SHX Text
CANTEEN 7975x4080
AutoCAD SHX Text
LOBBY 4725x2900
AutoCAD SHX Text
LOBBY 2140x1900
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FFL +9.60
AutoCAD SHX Text
LOBBY 3430X1950
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
GREEN WALL
AutoCAD SHX Text
HUB ROOM 2050x1600
AutoCAD SHX Text
CONFERENCE ROOM 5000x2900
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
PL SHAFT 600X1500
AutoCAD SHX Text
TOILET 2590X1500
AutoCAD SHX Text
WATER DISPENSER
AutoCAD SHX Text
150MM LEDGE WALL
AutoCAD SHX Text
100MM WIDE UNDER COUNTER LEDGE WALL
AutoCAD SHX Text
T= 300 R= 150 W=1800
AutoCAD SHX Text
15%%C DROP(TYP)
AutoCAD SHX Text
32%%C DROP(TYP)
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF SECOND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6052A
AutoCAD SHX Text
10477A-CV-819-6052AP0.dwg
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF SECOND FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6052A
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 6
900
DN
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
ELECTRICAL ROOM 2930x3150
AutoCAD SHX Text
CONFERENCE ROOM 8575x2600
AutoCAD SHX Text
COMMAND CONTROL CENTER 10540x12050
AutoCAD SHX Text
LOBBY 2160x2000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FFL +18.60
AutoCAD SHX Text
FFL +19.5
AutoCAD SHX Text
FFL +20.10
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
FFL +19.8
AutoCAD SHX Text
FFL +19.5
AutoCAD SHX Text
FFL +19.2
AutoCAD SHX Text
FFL +18.9
AutoCAD SHX Text
FFL +18.6
AutoCAD SHX Text
FFL +18.3
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
FFL +20.10
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
SPACE FOR FIRE EXTINGUISHER CYLINDERS
AutoCAD SHX Text
110 SOIL PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
75 WASTE PIPESLOPE 1:60(TYP)
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
DRAINAGE LAYOUT OF FOURTH FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6053
AutoCAD SHX Text
10477A-CV-819-6053P0.dwg
AutoCAD SHX Text
DRAINAGE LAYOUT OF FOURTH FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6053
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
Page 7
CONSULTING ENGINEERS LIMITED
MUMBAI
'P' (PRELIMINARY) ISSUES ARE NOT TO BE USED FOR
CONSTRUCTION / FABRICATION BUT ARE ISSUED FOR
LIMITED PURPOSES ONLY AS INDICATED IN THE SMALL
BLOCK ABOVE THIS BLOCK.
CONSTRUCTION / FABRICATION WORK IS PERMITTED ON 'R'
(RELEASED) ISSUES ONLY.
INFORMATION CONTAINED WITHIN 'HOLD' IS NOT RELEASED
FOR CONSTUCTION / FABRICATION. FIELD MUST GET
DESIGN OFFICE TO CLEAR 'HOLDS' IN TIME BEFORE
PROCEEDING WITH ANY CONSTRUCTION / FABRICATION
WORK RELATED TO 'HOLDS'.
Proprietary rights of the information contained herein belong to TCE. This
information is intended to be used for the mentioned purpose/project only.
In case of misuse of information and any claim arising thereof, cost and
consequence will be on the party misusing the information.
AutoCAD SHX Text
SERVICES 14340x4080
AutoCAD SHX Text
FFL +0.45
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
FOOTPATH
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FRL %%P0.0
AutoCAD SHX Text
SPACE FOR
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
1000 PROJECTION AT 1ST FLOOR
AutoCAD SHX Text
FFL +0.15
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
FFL +0.60
AutoCAD SHX Text
DATA CENTER 9920x6650
AutoCAD SHX Text
ELECTRICAL ROOM 2475x3150
AutoCAD SHX Text
LOBBY 4800x2900
AutoCAD SHX Text
AHU ROOM 2855x4080
AutoCAD SHX Text
NETWORK ROOM 4890x7210
AutoCAD SHX Text
LOBBY 2160x1900
AutoCAD SHX Text
LIFT (8 PAX)
AutoCAD SHX Text
FFL +14.10
AutoCAD SHX Text
LOBBY 3430X1950
AutoCAD SHX Text
1000 WIDE PASSAGE
AutoCAD SHX Text
HUB ROOM 2050x1600
AutoCAD SHX Text
STAIRCASE 4190X7000
AutoCAD SHX Text
150MM LEDGE WALL
AutoCAD SHX Text
100MM WIDE UNDER COUNTER LEDGE WALL
AutoCAD SHX Text
GREEN WALL
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
ALUMINUM LOUVERS
AutoCAD SHX Text
T= 300 R= 150 W=1800
AutoCAD SHX Text
15%%C DROP(TYP)
AutoCAD SHX Text
32%%C DROP(TYP)
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
DC & DISC
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
INITIALS
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DO NOT SCALE
AutoCAD SHX Text
FOR TENDER PURPOSE ONLY
AutoCAD SHX Text
13-05-2020
AutoCAD SHX Text
GUWAHATI SMART CITY DEVELOPMENT AGENCY LTD.
AutoCAD SHX Text
SMART CITY MISSION GUWAHATI
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF FOURTH FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6053A
AutoCAD SHX Text
10477A-CV-819-6053AP0.dwg
AutoCAD SHX Text
WATER SUPPLY LAYOUT OF FOURTH FLOOR
AutoCAD SHX Text
TCE.10477A-CV-819-6053A
AutoCAD SHX Text
%%uKEY PLAN%%U
AutoCAD SHX Text
(SCALE - NTS)
AutoCAD SHX Text
%%UNOTES:-
AutoCAD SHX Text
1. ALL THE DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.
AutoCAD SHX Text
2. ALL THE DRAWINGS SHALL BE READ IN CONJUNCTION WITH RELEVANT DRAWINGS AND SPECIFICATIONS.
AutoCAD SHX Text
3. ALL MATERIALS USED SHALL BE AS SPECIFIED IN SPECIFICATIONS AND INDICATED IN THE DRAWINGS.
AutoCAD SHX Text
4. WHEN PIPE IS PASSING THROUGH WALL AND FLOOR, FOR NON INSULATED PIPES, THE PIPE SLEEVE SHALL BE
AutoCAD SHX Text
PROVIDED ONE SIZE HIGHER THAN THE OUTER PIPE DIAMETER. THE GAP BETWEEN PIPE & SLEEVE SHALL BE
AutoCAD SHX Text
MINIMUM 10 MM & MAXIMUM 25 MM. THE ANNULAR SPACE BETWEEN PIPE & SLEEVE SHALL BE FILLED WITH
AutoCAD SHX Text
GLASS WOOL & SILICON SEALANT AT LEAST 20 MM DEEP. AS PER MANUFACTURER'S RECOMMENDATION IF PIPE
AutoCAD SHX Text
THROUGH FIRE RATED WALL, THEN SEALANT SHALL BE APPROVED FIRE SEALANT.
AutoCAD SHX Text
5. FLOORING IN THE WET AREA SHALL HAVE ADEQUATE SLOPE TOWARD THE FLOOR / NAHANI TRAPS.
AutoCAD SHX Text
6. SANITARY WARES, FITTINGS & ACCESSORIES MODELS SHALL BE USED AS PER ENGINEER'S APPROVAL.
AutoCAD SHX Text
7. LOCATIONS & LEVELS OF SANITARY APPLIANCES & FITTINGS ARE BASED ON STANDARD PRACTICE.
AutoCAD SHX Text
8. NECESSARY MODIFICATIONS, IF REQUIRED, TO SUITE THE INTERIOR DESIGN / TILE MODULES SHALL BE CARRIED
AutoCAD SHX Text
OUT AT SITE AFTER OBTAINING THE CONFIRMATION FROM SITE INCHARGE.
AutoCAD SHX Text
9. NECESSARY CUTOUTS / SLEEVES/ INSERTS ETC AS REQUIRED SHALL BE PROVIDED AT THE TIME OF
AutoCAD SHX Text
& CHECKED FOR THEIR CORRECT POSITION BEFORE & AFTER CONCRETING. ALL SUCH CUTOUTS / SLEEVES/
AutoCAD SHX Text
INSERTS ETC.SHALL BE APPROVED BY THE STRUCTURAL ENGINEER IN ADVANCE.
AutoCAD SHX Text
10.FLOOR LAYOUT, DIMENSIONS & LEVELS ARE BASED ON ARCHITECTURAL DRAWINGS FURNISHED AT THE TIME OF
AutoCAD SHX Text
PREPARATION OF THE RESPECTIVE DRAWINGS. REFER LATEST ARCHITECTURAL LAYOUT BEFORE CARRYING OUT
AutoCAD SHX Text
THE WORK. DISCREPANCY, IF ANY,TO BE GOT CLARIFIED FROM THE SITE INCHARGE & NECESSARY MODIFICATIONS
AutoCAD SHX Text
TO BE CARRIED OUT AT SITE.
AutoCAD SHX Text
11.IN NO CASE DAMAGE TO STRUCTURAL ELEMENT IS PERMITTED FOR CONCEALED PIPING/CONDUTING. PROVIDE
AutoCAD SHX Text
LEDGE WALLS AND CONCEALED ALL PIPES/CONDUITS WHEREVER REQUIRED.
AutoCAD SHX Text
12.FOR CUTOUT DETAILS REFER STRUCTURAL DRAWINGS.
AutoCAD SHX Text
13.THESE ARE TENDER PURPOSE DRAWINGS. EXACT ROUTING OF PIPES AND LOCATION CAN BE FINALISED DURING
AutoCAD SHX Text
DETAILED ENGINEERING.
AutoCAD SHX Text
FLOOR TRAP/ DEEP SEAL 'P TRAP
AutoCAD SHX Text
FLOOR CLEAN OUT
AutoCAD SHX Text
LEGENDS :-
AutoCAD SHX Text
Ø75mm VENT PIPE75mm VENT PIPEVENT PIPE
AutoCAD SHX Text
DWS FROM UGT TO OHT PIPE
AutoCAD SHX Text
DOMESTIC WATER SUPPLY PIPE
AutoCAD SHX Text
Ø110mm SOIL PIPE Ø110mm SOIL PIPE 110mm SOIL PIPE SOIL PIPE SOIL PIPE
AutoCAD SHX Text
Ø110mmWASTE PIPE Ø110mmWASTE PIPE 110mmWASTE PIPE WASTE PIPE
AutoCAD SHX Text
Ø110mm RAIN WATER PIPE Ø110mm RAIN WATER PIPE RAIN WATER PIPE
AutoCAD SHX Text
BALL VALVE
user
Typewriter
GUWAHATI SMART CITY LIMITED
