www.trifleet.nl - [email protected]15.000 ltr - IMDG-IMO 1 - FRAME TANK CONTAINER Type: : IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT-IM101, TIR Customs, and registration RID/ADR, AR600, IMDG-IMO Type 1, CSC, TC, UIC General specifications: Nominal Capacity (Tolerance +- 0.75%) : 15000Liters 3963Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 3250Kg 7165Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000Kg 79366Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth: 2438 mm Tank Design Temperature : 120ºc (248ºF) Length: 20' 0 " Width: 8' 0" Heigth: 8' Tank Design Code : ASME VIII DIV.1 Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Top discharge : 3" Provision only Walkways : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap. Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated Effective area 8m², WP = 4 bar tested to 10 bar Insulation : Nominal thickness 45mm Thermometer : Contact type analog from -20ºc to 200ºc Tanklite / compressed mineral wool on barrel Cladding : Natural finish marine grade aluminium Heating connections : 3/4" BSP with caps Calibration : Calibration chart fitted in spillbox Condensate drain fitted at lowest point Frame: Frame type : Frame Handrail Provision : Provision made for the fitment of collapsible handrails.
Type: : IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT-IM101, TIR Customs, and registration RID/ADR, AR600, IMDG-IMO Type 1, CSC, TC, UIC
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 15000 Liters 3963 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 3250 Kg 7165 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth: 2438 mm Tank Design Temperature : 120ºc (248ºF) Length: 20' 0 " Width: 8' 0" Heigth: 8' Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Top discharge : 3" Provision only Walkways : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 8m², WP = 4 bar tested to 10 bar
Insulation : Nominal thickness 45mm Thermometer : Contact type analog from -20ºc to 200ºc
Type: : IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT-IM101, TIR Customs, and registration RID/ADR, AR600, IMDG-IMO Type 1, CSC, TC, UIC
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 17500 Liters 4623 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 3%) : 3380 Kg 7452 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth: 2438 mm Tank Design Temperature : 120ºc (248ºF) Length: 20' 0 " Width: 8' 0" Heigth: 8' 0" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Top discharge : 3" Provision only Walkways : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 8m², WP = 4 bar tested to 10 bar
Insulation : Nominal thickness 45mm Thermometer : Contact type analog from -20ºc to 200ºc
Type: : IMDG T11 for transport of PRODUCT CLASSES 3, 5.1, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT-IM101, TIR Customs, and registration RID/ADR, AR600, IMDG-IMO T11, CSC, TC, UIC
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 21000 Liters 5548 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 3%) : 3370 Kg 7430 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth: 2591 mm Tank Design Temperature : 120ºc (248ºF) Length: 20' 0 " Width: 8' 0" Heigth: 8' 6" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Top discharge : 3" Provision only Walkways : 1 Longitudinal, 3 transverse, 475mm wide, Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 8m², WP = 4 bar tested to 10 bar
Insulation : Nominal thickness 50mm Thermometer : Contact type analog from -20ºc to 200ºc
Type: : T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, CFR 49 - US DOT, IMDG and registration ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention
General specifications:
Nominal Capacity (Tolerance +- 0.75%) : 24000 Liters 6340 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 3450 Kg 7605 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth 2591 mm Tank Design Temperature : -40ºc +130ºc (-40ºF - 266ºF) Length: 20' 0 " Width: 8' 0" Heigth 8' 6" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Walkways : 1 Longitudinal, 2 transverse, 475mm wide, Top discharge : Providion only Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 7.5m², WP = 4 bar tested to 6 bar
Insulation : Nominal thickness 45mm Thermometer : Wika contact type analog from -20ºc to 160ºc
Type: : T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT, UKDETR, IMDG and registration ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 25000 Liters 6604 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 3500 Kg 7716 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth 2591 mm Tank Design Temperature : -40ºc +130ºc (-40ºF - 266ºF) Length: 20' 0 " Width: 8' 0" Heigth 8' 6" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Walkways : 1 Longitudinal, 2 transverse, 475mm wide, Top discharge : 3" Provision only Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 7.5m², WP = 4 bar tested to 6 bar
Insulation : Nominal thickness 45mm Thermometer : Contact type analog from -20ºc to 160ºc
Type: : T11/24/SH 8 for transport of PRODUCT CLASSES 3, 4, 5.1, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT, UKDETR, IMDG and registration ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 25000 Liters 6604 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 3500 Kg 7716 Lbs Test pressure : 6 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.41 bar Dimensions to ISO : Length: 6058 mm Width: 2438 mm Heigth 2591 mm Tank Design Temperature : -40ºc +130ºc (-40ºF - 266ºF) Length: 20' 0 " Width: 8' 0" Heigth 8' 6" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 2" Blind off connection Safety Relief Valve : 1 pcs 2½" pressure (4.4 bar) relief valve Spill boxes : 2 Stainless steel boxes, with lockable Air Inlet : 1½" Ball valve with 1½" BSP connection, spillbox covers Walkways : 1 Longitudinal, 2 transverse, 475mm wide, Top discharge : 3" Provision only Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 7.5m², WP = 4 bar tested to 6 bar
Insulation : Nominal thickness 45mm Thermometer : Contact type analog from -20ºc to 160ºc
27.000 ltr - IMDG-IMO 1 - SWAP BODY TANK CONTAINER
Type: : IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, US DOT-IM101, IMDG -IMO Type 1 and registration ASME VIII Div 1, RID / ADR, AAR 600 TC, CSC, UIC, Customs Convention
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 27000 Liters 7133 Gallons MAWP : 4 bar Tare Mass (Tolerance +- 1.5%) : 4400 Kg 9700 Lbs Test pressure : 6 bar Maximum Gross Mass: : 34000 Kg 74956 Lbs External Pressure : 0.4 bar Dimensions to ISO : Length: 6058 mm Width: 2550 mm Heigth 2743 mm Tank Design Temperature : 100ºc (212ºF) Length: 20' 0 " Width: 8' 4" Heigth 9' 0" Tank Design Code : ASME VIII DIV.1
30.000 ltr - IMDG-IMO 1 - SWAP BODY TANK CONTAINER
Type: : IMDG-IMO Type 1 for transport of PRODUCT CLASSES 3, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, IMDG -IMO 1 and registration ASME VIII Div 1, RID / ADR, CSC, UIC, TIR Customs Convention
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 30000 Liters 7925 Gallons MAWP : 3 bar Tare Mass (Tolerance +- 1.5%) : 4160 Kg 9171 Lbs Test pressure : 4.5 bar Maximum Gross Mass: : 34000 Kg 74956 Lbs External Pressure : 0.4 bar Dimensions to ISO : Length: 7150 mm Width: 2550 mm Heigth 2670 mm Tank Design Temperature : -20 to 120ºc (68 to 248ºF) Length: 23' 5 " Width: 8' 4" Heigth 8' 9" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500 mm Stainless steel Spare connection : - Cleaning port : 3 pcs 300 mm Stainless steel Spill boxes : 4 Stainless steel boxes, with lockable Safety Relief Valve : 1 pcs 3" pressure (4.4 bar) relief valve spillbox covers Air Inlet : 1½" Ball valve with 1½" BSP connection, Walkways : 1 Longitudinal, 3 transverse, 400 mm wide, Top discharge : 3" Provision only Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel Terminating into a 3" BSP outlet with cap.
4 Fixed baffles fitted Weld-in flange to be steam heated
Steam Heating : 8 Longitudinal stainless steel elements
Effective area 10.5m², WP = 3.0 bar tested to 4.5 bar Thermometer : Contact type analog from -20ºc to 200ºc
Insulation : Nominal thickness 50 mm
Tanklite / compressed mineral wool on barrel Heating connections : 3/4" BSP with caps
Cladding : White GRP over barel and ends Condensate drain fitted at lowest point
Calibration : Calibration chart fitted in spillbox Frame: Frame type : Swap body Handrail Provision : Provision made for the fitment of collapsible handrails.
Type: : IMDG T4 for transport of PRODUCT CLASSES 3, 5.1, 6.1, 8 and 9 Approvals, certification : ISO 1496/3, IMDG T4 and registration ASME VIII Div 1, RID / ADR, UK-DETR CSC, UIC, TIR Customs Convention
General specifications: Nominal Capacity (Tolerance +- 0.75%) : 35000 Liters 9246 Gallons MAWP : 2.67 bar Tare Mass (Tolerance +- 1.5%) : 4100 Kg 9038 Lbs Test pressure : 4 bar Maximum Gross Mass: : 36000 Kg 79366 Lbs External Pressure : 0.21 bar Dimensions to ISO : Length: 7820 mm Width: 2550 mm Heigth 2670 mm Tank Design Temperature : -40 to 130ºC (-40 to 266ºF) Length: 25' 8 " Width: 8' 4" Heigth 8' 9" Tank Design Code : ASME VIII DIV.1
Top specifications: Manlid : 500mm Stainless steel Spare connection : 1 1/2" Blind off connection Cleaning port : 4 pcs 300mm Stainless steel Spill boxes : 5 Stainless steel boxes, with lockable Safety Relief Valve : 2 pcs 2½" pressure (3.33/-0.21 bar) relief valve spillbox covers Air Inlet : 2" Ball valve with 2" BSP connection, Walkways : 1 Longitudinal, 5 transverse, 475mm wide, Top discharge : 3" Provision only Marine grade aluminium
Tank vessel and frame specifications: Rear specifications: Tank vessel: Bottom Discharge : 3" 30º Perolo foot and butterfly valve
Tank Barrel Material : 316L Stainless steel, 4 fixed baffles fitted Terminating into a 3" BSP outlet with cap.
Steam Heating : 8 Longitudinal stainless steel elements Weld-in flange to be steam heated
Effective area 10m², WP = 3.0 bar tested to 4.5 bar
Insulation : Nominal thickness 50 mm Thermometer : Contact type analog from -20ºc to 200ºc
Compressed mineral wool on barrel
Cladding : White finish marine grade aluminium Heating connections : 3/4" BSP with caps
GRP domes on ends Condensate drain fitted at lowest point
Calibration : Calibration chart fitted in spillbox Frame: Frame type : Swap body Handrail Provision : Collapsible handrail is fitted
35.000 ltr — IMDG IMO 1 — SWAP BODY TANK CONTAINER
35.000 ltr — IMDG—IMO 1 — SWAP BODY TANK CONTAINER
