•27 Contender™ Series Covers with Pilot Lights or Push Buttons. Covers Only for Contender Bodies All Covers are Malleable Iront Supplied with Four Bolts and Blank Nameplate. UL Classified to interchange with Grouse-Hinds® EDS Bodies. Description Nameplate Marking Catalog Number f Cover complete with Push Buttons - Factory Sealed ^ \ For use with EDS ^M ' j^3 N M 1 Circuit Universal * •* W* 2Circuit Universal U1 OC 2 Circuit 1 Open '* v 1 Closed >3 - * Bodies (furnished al* • • •1* • • i UA • • _L • • • •la with 4 bolts and blank cover Specify Specify START STOP nameplate). EDKB-U1 EDKB-U2 EDKB-OC U2 J1U2 Cover complete with Pilot Lights - Factory Sealed 6W120V, Type 6S6 Lamp. For use on standard EDS Bodies (furnished with 4 bolts and blank cover nameplate). One pilot light (red jewel*) and one universal circuit One pilot light (red jewel*) and two universal push buttons One pilot light (red jewel*) Two pilot lights (red jewels*) tit tlAtl* Specify Specify Specify Specify EDKB-J1U1 EDKB-J1U2 EDKB-J1 EDKB-J2 * * | IPBorU B 2PB or 2J orUPB "S^pBHipW^ B 1JSS orSPB t For aluminum covers, add suffix - A. Covers Only - for use on Contender bodies Supplied with 4 cover bolts and blank cover nameplate. Push Button or Pilot Light Covers 3/4" tapped openings for pilot light. 1/2" tapped openings for push button. One opening: one push button One opening: one pilot light Two openings: two push buttons Two openings: two pilot lights Two openings: one of each Specify Specify Specify Specify Specify EDSK-1PB EDSK-1J EDSK-2PB EDSK-2J EDSK-1JPB Push Button or Selector Switch 1/2" tapped openings. Two openings: selector switch or two push buttons (side by side) Specify EDSK-2SP Push Button, Pilot Light or Selector Switch 3/4" top and 1/2" bottom-tapped openings. One top and two bottom openings: Specify EDSK-USS one pilot light, two push buttons; (side by side) one pilot light, one selector switch 1/2" top and 1/2" bottom-tapped openings. one top and two bottom openings: Specify EDSK-3PB three push buttons Blank Specify EDSK-B Specify * For other colors, add color suffix for each pilot light: Amber - J6, Blue - J11, Clear - J10, Green - J3, Opal - J8. Effective October, 1993 Copyright 1993 Printed in U.S.A. 1701 West Wellington Avenue Chicago, Illinois 60657 PAGE 27
Transcript
•27Contender™ Series Covers with PilotLights or Push Buttons. Covers Onlyfor Contender BodiesAll Covers are Malleable IrontSupplied with Four Bolts and Blank Nameplate.UL Classified to interchange with Grouse-Hinds® EDS Bodies.
DescriptionNameplateMarking
CatalogNumber f
Cover complete with Push Buttons - Factory Sealed^ \ For use with EDS
^M ' j^3
N M 1 Circuit Universal
* •* W* 2 Circuit UniversalU1 OC
2 Circuit1 Open
'* v 1 Closed>3 - *
Bodies (furnished
al*• •
•1*• •iUA• •_L• •••la
with 4 bolts and blank cover
Specify
Specify
STARTSTOP
nameplate).
EDKB-U1
EDKB-U2
EDKB-OC
U2
J1U2
Cover complete with Pilot Lights - Factory Sealed6W120V, Type 6S6 Lamp.For use on standard EDS Bodies (furnished with 4 bolts and blank cover nameplate).
One pilot light (red jewel*) and oneuniversal circuit
One pilot light (red jewel*)and two universal push buttons
One pilot light (red jewel*)
Two pilot lights (red jewels*)
tit
tlAtl*
Specify
Specify
Specify
Specify
EDKB-J1U1
EDKB-J1U2
EDKB-J1
EDKB-J2
* *
|IPBorU
B2PB or 2JorUPB
"S p̂BHipW^
B
1JSSorSPB
t For aluminum covers, add suffix - A.
Covers Only - for use on Contender bodiesSupplied with 4 cover bolts and blank cover nameplate.
Push Button or Pilot Light Covers3/4" tapped openings for pilot light.1/2" tapped openings for push button.
One opening: one push buttonOne opening: one pilot light
Two openings: two push buttonsTwo openings: two pilot lightsTwo openings: one of each
SpecifySpecify
SpecifySpecifySpecify
EDSK-1PBEDSK-1J
EDSK-2PBEDSK-2JEDSK-1JPB
Push Button or Selector Switch1/2" tapped openings.
Two openings: selector switchor two push buttons (side by side)
Specify EDSK-2SP
Push Button, Pilot Light or Selector Switch3/4" top and 1/2" bottom-tapped openings.
One top and two bottom openings: Specify EDSK-USSone pilot light, two push buttons; (side by side)one pilot light, one selector switch
1/2" top and 1/2" bottom-tapped openings.one top and two bottom openings: Specify EDSK-3PBthree push buttons
Blank Specify EDSK-BSpecify
* For other colors, add color suffix for each pilot light: Amber - J6, Blue - J11, Clear - J10, Green - J3, Opal - J8.
Effective October, 1993Copyright 1993 Printed in U.S.A.
1701 West Wellington AvenueChicago, Illinois 60657
PAGE 27
18Contender™ Series Factory SealedControl Stations and Pilot Lights:Explosion-Proof, Dust-Ignition-ProofUNILETS® for Use with Threaded Metal Conduit.Furnished with Internal Ground Screw.
Applications• Push buttons and selector switchesare used in conjunction with contactorsor magnetic starters for remote con-trol of motors. They provide circuit con-trol and/or selection.• Pilot lights provide visual assurancethat an electrical function is being per-formed at a remote or local location.• Contender Series factory sealed con-trol stations confine arcing of devicewithin the enclosure, preventing igni-tion of ignitable atmospheres duringcontrol operation of motors and otherequipment.• Used in classified areas where flam-mable vapors, gases or highly com-bustible dusts are present.• For installation in chemical and petro-chemical plants, refineries, and otherprocess industries or where corrosiveelements are present.
Features• Covers UL Listed when used onContender bodies.• Covers UL Classified to interchangewith Crouse-Hinds® EDS bodies.• Finish is epoxy powder coat for en-hanced corrosion resistance.• Large back box for ample wiringroom.• Ground screw installed in bodiesfor ground continuity.• Corrosion-resistant stainless steelhex-head captive screws hold coversto body.• Factory sealed enclosure eliminatesneed for adding sealing fittings andcompound at each conduit entrance.• Heavy-duty, 10 ampere 600V rated.• Factory sealed pilot lights suppliedwith jewel/guard assembly and 120V,6W 6S6 lamp.• Dozens of possible combinations ofpush buttons, pilot lights and selectorswitches.• Accurately tapped, tapered hubsfor tight, rigid joints and ground con-tinuity.• Smooth, rounded integral bushingin each hub protects conductor insu-lation.• Stainless steel push button shaftoperates within stainless steel bush-ing assuring long, maintenance-freeoperation.
• Push button and selector switch con-tacts are silver cadmium oxide whichare "sealed" in lower phenolic chamberisolated from corrosive elements.Assures positive contact and long, trou-ble-free operation.• Enclosed stainless steel helper springprevents accidental operation of pushbutton in severe vibration installations.
• All front-operated push buttons aresupplied with lockout type guards asstandard. Hole in guard will acceptlocks with up to 1/4" hasp. Permits lock-ing of push button to prevent unau-thorized operation.• Clearly marked terminals with brassscrews and spade terminals assurequick, easy wiring.
Effective October, 1993Copyright 1993 Printed in U.S.A.
PAGE 18
1701 West Wellington AvenueChicago, Illinois 60657
'26Class I, Div. 1 and 2,Groups C,D;Class II, Div. 1 and 2,Groups E,F,G;Class III
Contender™ Series Pilot LightAccessories and Parts
Description Catalog Number
Pilot Light, Factory SealedFurnished with 6S6 110V lamp, jewel and guard. Has 10" long, Type SFF-2(150°C) pigtail leads. Body has 3/4" straight thread (NPSM).
With Red JewelWith Green JewelWith Amber JewelWith Blue JewelWith Clear JewelWith Opal Jewel
SPL-RE-BSPL-GR-BSPL-AM-BSPL-BL-BSPL-CL-BSPL-OP-B
Chamber OnlySame as above, except less jewel, guard and lamp
SPL-SC-B
Pilot Light, Factory Sealed - LEDFurnished with candelabra base LED, jewel and guard. Has 10" long, Type SFF-2(150°C) pigtail leads. Body has 3/4" straight thread (NPSM).
With Red LED, Clear JewelWith Green LED, Clear JewelWith Amber LED, Clear
SPLN-RE-BSPLN-GR-BSPLN-AM-B
Pilot Light Jewel/Guard AssemblyUse catalog number as suffix when jewel color other than red is desired. If thejewel/guard assembly only is desired, order by catalog number. Jewels and guardare not available as separate items.
TransformerAdd suffix as listed below.Transformer clamps directly to pilot light barrel.Only one pilot light/ transformer assembly per one gang Contender body.
Primary Voltage
220277440550
Lamp Voltage
120120120120
Cat. No. orSuffix
-TR-2-TR-3-TR-4-TR-5
Effective October, 1993Copyright 1993 Printed in U.S.A.
PAGE 26Appleton
• • ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657
