CBICooling - Temperature regulation
2
Non-spill flat-face pollution preventing technology …
Non-spill to ensureoperator safety - no discharge and no work place
contamination,
- protection for tools andproduction.
Pollution-preventing flat faces to guarantee the integrity of fluids and gasses - no pollution enters your circuits.
Excellent mechanicalstrength The robust construction with longplug guiding in the socket in theconnected position provides theCBI with great strength to withstandhigh mechanical stresses(vibrations, oscillations, etc).
• cold water, glycol water,hot water, steam,
• mineral or syntheticheat transfer oil,
• lubricating oil,
• gas circuits: argon,nitrogen, helium, etc.
A wider range The CBI is now available in 5 nominal bores: 1/8", 1/4", 3/8", 1/2" and 5/8".
3
…. ensures permanency of sealing
Push; and its connected Automatic locking CBIs give youever easier handling.
A concept that is especiallysuitable for:- blind connection,- repeated connection.
Compact design Especially suitable for difficultaccess situations.
Efficiency Maximum flow in the smallestsize.
Possibility of pluginstalled recessed into pocket
3D-files available on request.
Ease of connection • Front sealing by a seal fitted into the back adapter on all cylindrical male plugs.
• Sealing by sealing-kit KESring available on all cylindrical male sockets.
4
Technical data
SealingSeals: • Nitrile (NBR)• Fluorocarbon (FPM)• Ethylene-Propylene (EPDM) *• Perfluoroelastomer (FFKM) in the fluid path
Other seal materials available on request.
CBI 03 CBI 06 CBI 09 CBI 12 CBI 16
Max. working pressure (psi) 725 725 725 725 725
Bore diameter (inches) 1/8" 1/4" 3/8" 1/2" 5/8"
Shut-off double
ConstructionLargely stainless steel with high mechanical resistance.
Construction 100% stainless steel available on certainmodels: see part-number tables.
Socket dust cap: aluminium and Chloropren (CR)Plug dust cap: Chloropren (CR)
Type of flow Type of seal Working temperatures (°F)
Cold or hot water, hydraulic and mineral oils Nitrile (NBR) + 5 to + 212 °F
Mineral heat transfer oil Fluorocarbon (FPM) + 14 to + 302 °F
Synthetic heat transfer oil Fluorocarbon (FPM) + 14 to + 392 °FPerfluoroelastomer (FFKM) 0 to + 482 °F
Glycol water Ethylene-Propylene (EPDM) * - 4 to + 302 °F
Hot water and steam Ethylene-Propylene (EPDM) * - 4 to + 392 °F
Working temperatures
Without dust cap
Working temperatures for dust caps in Chloropren (CR): - 4 to + 212 °F
For other temperatures, consult us.
* Important ! Never use Ethylene-Propylene seals with fluids of mineralorigin (oil, fat etc…).
5
Speed of flow less than or equal to 16.5 ft/s: - all seals
Speed of flow between 16.5 and 33 ft/s: - Nitrile and Fluorocarbon seals- temperatures ≤ 140 °F
Hydraulic flow rate / pressure drop charts
CBI 03 CBI 06 CBI 09 CBI 12 CBI 16
16.5 0.53 2.2 5 9 16
33 1.10 4.5 10 18 32
Speed(ft/s)
Flow(gal/mn)
Flow (gal/min)
Pre
ssur
e d
rop
(psi
)
Flow (gal/min)
Pre
ssur
e d
rop
(psi
)
CBI 09 to CBI 16
CBI 03 and CBI 06
Test conditions: - Fluid: water- Direction of flow: plug socket
6
Flow (SCFM)
Pre
ssur
e d
rop
(psi
)
Test conditions: - Inlet pressure: 87 psi - Direction of flow:
plug socket
Pneumatic flow rate / pressure drop charts
Plugs installed recessed in pocket
Enhanced shoulder locking ringtype CBI 06 and CBI 09 sockets
Add the code VP to the CBI 06 or 09socket part-numbers pages 7 and 8.Ex.: CBI 06.1101/IA/VP
All plugs can be fully flush-fitted.
When recessed mounting CBI 06 and 09 plugs, to improve grip when disconnecting, it is essential to use the enhanced shoulder locking ring type CBI 06 and 09 sockets.
DimensionsCBI 06: Ø = 0.94" - L = 1.18"CBI 09: Ø = 1.42" - L = 1.69"
Machining drawings for recessed installationavailable on request
7
Part-numbers - Sockets
Designation Part-numbers
1. Sockets female thread
Dimensions (inches)
L1 L2 L3 L4 H/flats
G 1/8
NPT 1/8
CBI 03 1.91 0.51
1.83 0.51
CBI 03.1100/IA (1)
CBI 03.1200/IA (1)
2. Sockets female thread
G 1/4
NPT 1/4
CBI 06 2.40 0.79
2.40 0.67
CBI 06.1101/IA (1)
CBI 06.1201/IA (1)
G 1/4
NPT 1/4
CBI 06.1101/IA/RE
CBI 06.1201/IA/RE
4. Sockets male thread
G 1/460° cone
G 3/860° cone
M 16 x 1,524° conefor tube
Ø 10 mm
2.42 0.43 0.79
2.40 0.47 0.83
2.32 0.43 0.79
CBI 06.1151/IA
CBI 06.1152/IA
CBI 06.1416/IA
G 1/4
G 3/860° cone
M 16 x 1,524° cone for tube
Ø 10 mm
2.22 0.43 1.73 1.89 0.87
2.22 0.43 0.96 1.89 0.87
2.22 0.43 0.94 1.89 0.87
CBI 06.1151/IA/RE
CBI 06.1152/IA/RE
CBI 06.1416/IA/RE
Model
2.22 0.98 1.89 0.87
2.22 0.96 1.89 0.87
6. Sockets for rubber hose
7. Sockets for self-lockinghose
Ø 3/8" 2.22 0.93 2.20 1.89 0.75 CBI 06.1810/IA/CN/RE
3.09 1.10 0.793/8" I.D. CBI 06.1810/IA
Ø 3/8" 2.93 0.93 0.79 CBI 06.1810/IA/CN
Thread or Ø
3. Sockets 90° female thread
5. Sockets 90° male thread
8. Sockets 90° for self-locking hose
(1) These part-numbers are also available in 100% stainless steel construction: see page 11
8
CBI 09
Part-numbers - Sockets
Designation Part-numbersDimensions (inches)
L1 L2 L3 L4 H/flatsModel
2.97 0.94
2.97 0.94
CBI 09.1102/IA (1)
CBI 09.1202/IA (1)
3.23 0.47 0.94
3.31 0.55 0.94
CBI 09.1152/IA (1)
CBI 09.1153/IA
G 3/8
NPT 3/8
G 3/860° cone
G 1/260° cone
2.24 0.43 0.96 1.89 0.83 CBI 09.1152/IA/REG 3/860° cone
4.53 1.10 0.87 CBI 09.1813/IA/CNØ 1/2"
3.82 1.10 1.77 3.46 0.83 CBI 09.1813/IA/CN/REØ 1/2"
CBI 12 4.06 1.06
4.06 1.06
CBI 12.1103/IA (1)
CBI 12.1203/IA (1)
G 1/2
NPT 1/2
14. Sockets female thread
CBI 16 5.10 1.42
5.06 1.42
CBI 16.1104/IA
CBI 16.1204/IA
G 3/4
NPT 3/4
15. Sockets female thread
10. Sockets male thread
Thread or Ø
(1) These part-numbers are also available in 100% stainless steel construction: see page 11
9. Sockets female thread
11. Sockets 90°male thread
12. Sockets for self-locking hose
13. Sockets 90° for self-lockinghose
9
Part-numbers - Plugs
ThreadDesignation Part-numbers
1. Plugs female thread
Dimensions (inches)
L1 L2 L3 L4 H/flats
G 1/8
NPT 1/8
CBI 03 1.71 0.51
1.63 0.51
CBI 03.7100/IA (1)
CBI 03.7200/IA (1)
G 1/8 1.56 0.31 0.51 CBI 03.7150/IA (1)
Model
3. Plugs BSP male thread with 60° cone and integrated sealing
G 1/4
G 3/8
CBI 06 2.13 0.39 0.67
2.11 0.43 0.83
CBI 06.7151/IA (1)
CBI 06.7152/IA
4. Extended plugs, BSP male thread with 60° cone and integrated sealing
G 1/4
G 1/4
G 1/4
2.91 0.39 2.52 0.67
3.62 0.39 3.23 0.67
4.80 0.39 4.41 0.67
CBI 06.7151/IA/64
CBI 06.7151/IA/80
CBI 06.7151/IA/110
NPT 1/4
NPT 3/8
R 1/4
CBI 06.7251/IA
CBI 06.7252/IA
CBI 06.7161/IA
2.11 0.43 0.67
2.09 0.43 0.75
2.11 0.43 0.67
CBI 09 G 3/8 2.80 0.91 CBI 09.7102/IA (1)
7. Plugs BSP male thread with 60° coneand integrated sealing
G 3/8 2.64 0.43 0.91 CBI 09.7152/IA (1)
2.72 0.43 0.91
2.64 0.43 0.91
NPT 3/8
R 3/8
CBI 09.7252/IA
CBI 09.7162/IA
5. Plugs conical male thread
6. Plugs female thread
8. Plugs conical male thread
(1) These part-numbers are also available in 100% stainless steel construction: see page 11
2. Plugs BSP male threadwith 60° cone and integrated sealing
ThreadDesignation Part-numbersDimensions (inches)
L1 L2 L3 L4 H/flatsModel
10
Part-numbers - Plugs
CBI 16
10. Plugs BSP male thread with 60° cone and integrated sealing
3.35 0.55 1.18 CBI 12.7153/IA (1)G 1/2
11. Plugs conical male thread 3.50 0.59 1.18 CBI 12.7163/IA (1)R 1/2
12. Plugs female thread
13. Plugs BSP male thread with 60° cone and integrated sealing
3.96 0.59 1.50 CBI 16.7154/IAG 3/4
G 3/4
NPT 3/4
4.13 1.50
4.02 1.50
CBI 16.7104/IA
CBI 16.7204/IA
CBI 12 9. Plugs female thread 3.54 1.18
3.54 1.18
CBI 12.7103/IA (1)
CBI 12.7203/IA (1)
G 1/2
NPT 1/2
(1) These part-numbers are also available in 100% stainless steel construction: see page 11
11
KES sealing-kit Possible on all the BSP male threadedsockets.
Part-numbers of the KES sealing-kits: G 1/4 KES 01.9101G 3/8 KES 01.9102G 1/2 KES 01.9103
Available with 3 different types of seals:No code: Nitrile sealJV: Fluorocarbon sealJE: Ethylene-Propylene seal
Sealing Fluorcarbon (FPM), Ethylene-Propylene(EPDM) and Perfluoroelastomer (FFKM)seals are available on all models. Add the corresponding code to the socketand plug part-numbers:JV: Fluorocarbon sealsJE: Ethylene-Propylene sealsJKV: Perfluoroelastomer seals
in the fluid pathEx.: CBI 09.1102/IA/JV
Protective dust capsAvailable for all the models.
100% stainless steel constructionAvailable on certain models: see part-numberstables.Add the code BF to the concerned part-numbersof the sockets and the plugs.Ex.: CBI 03.1100/IA/BF
Interchangeability with the SPI rangeCBI 06 and CBI 09 sockets and plugs are fullycompatible with the Stäubli SPI range:- SPI plugs with CBI sockets- SPI socket with CBI plugs
Overall dimensions in coupled position L = (L1 socket + L1 plug ) – X
Plug dust cap part-numbers:CBI xx.8550
Socket dust cap part-numbers:CBI xx.8500
Model X (in.)CBI 03 0.73CBI 06 0.97CBI 09 1.30
Model X (in.)CBI 12 1.81CBI 16 2.24
We reserve the right to modify product specification without prior notice.
Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries.© Stäubli, 24/02/2010
International sales coordinationStäubli Faverges - BP 70 - F - 74210 FavergesTel.: +33 (0) 4 50 65 67 97 - Fax: +33 (0) 4 50 65 60 69e mail: [email protected]
BrazilTel.: +55 (0) 11 5182 [email protected]
North America(USA, Canada, Mexico)Tel.: +1 864/[email protected]
D 4
10
.01
us
A
ChinaTel.: +86 571 [email protected]
Hong KongTel.: +852-2366 [email protected]
JapanTel.: +81 6 6889 [email protected]
SingaporeTel.: +65 / 6266 [email protected]
TaiwanTel.: +886-2-2568 [email protected]
TurkeyTel.: +90 212/472 13 [email protected]
PortugalTel.: +351 22 978 39 56/[email protected]
RussiaTel.: + 7 812 [email protected]
SpainTel.: +34 937 205 [email protected]
SwitzerlandTel.: +41 (0) 43/244 22 [email protected]
United KingdomTel.: +44 (0) 1952 671 [email protected]
BelgiumTel.: +32 (0) 56 36 40 [email protected]
Czech Republic, Slovakia, HungaryTel.: +420 466 616 [email protected]
FranceTel.: +33 (0)1 69 93 25 [email protected]
Germany, AustriaTel.: +49 (0) 921/[email protected]
ItalyTel.: +39 (0) 362/[email protected]
PolandTel.: +48 42 636 85 [email protected]
www.staubli.com
Stäubli unitsConnectors distributors