Cracking Open the Time Capsule

8/6/2019 Cracking Open the Time Capsule

1/12

Cracking Open the Time Capsule

Like most computer users, I used to only back up my data occasionally (if ever). Maybe

once a year I'd burn a DVD with my most important files and stick it in a drawer

somewhere, but that was about all the more protection I gave myself against data loss.

It's not that I didn't care about my data; I simply didn't have the time to spend to set up

a full backup solution. When Apple's Time Capsule -- a wireless router with a built-in hard

drive -- was announced at the 2008 Macworld Expo, I knew I needed one. It would work

with Time Machine, the built-in backup software in OS X 10.5, to quietly and seamlessly

back up the hard drives in both my own and my wife's Macs.

Overall, Time Capsule is a great product -- a draft-802.11n wireless router, 3-port gigabit

Ethernet switch, and hard drive all in one compact unit. It even sports a USB 2.0 port for

connecting a printer or external hard drive to share over the network. I picked up a

500GB model as soon as they hit store shelves; I could have opted for the 1TB unit, butfelt that almost $500 for it was a bit excessive. When I got it home and set it up, it

worked perfectly, except I soon realized that the internal hard drive, which Apple calls

"server-grade," was fairly noisy and ran hot.

My Time Capsule sits on my desk; I didn't want to stuff it in a corner somewhere, as I

didn't want to reduce its wireless range (especially since there are no external antenna

ports to which I could attach high-gain antennas, as I had with my previous Linksys

wireless router). I lived with the noise, and worried about the hard drive's longevity due

to the heat it produced, for about nine months before deciding to do something about it.

First, some background on the Time Capsule's innards. It is, more or less, an AirPortExtreme base station with an internal single-channel SATA bus. The firmware for the Time

Capsule is set up to dedicate the internal drive solely for Time Machine. All of the

Cracking Open the Time Capsule | Applefritter http://www.applefritter.com/node/23907

sur 12 22.10.10 20:41


2/12

Ethernet ports are of the gigabit variety, as large backups over 100Mbit would be, well,

unbearable. The unit has air vents around its base, and has an internal fan, in an effort to

keep the hard drive cool. Unfortunately, the airflow through the case still seems to be

pretty poor, so when the hard drive has been running for a while (say, during Time

Machine's initial backup), the fan ultimately needs to run full speed and is thus quite

noisy.

Depending on the model of Time Capsule you buy, you'll end up with one of two drive

models: a 500GB Seagate ST3500630NS or 1TB Hitachi Deskstar 7K1000. Apple markets

the drives in the two Time Capsule models as "server-grade;" I've read a number of blog

posts claiming that these models don't qualify as being "server-grade." So, perhaps to

throw some logic into the argument, let's take a closer look at the 500GB Seagate drive

that Apple uses.

Figure 1.Seagate ST3500630NS SATA hard drive, as found in the 500GB Time Capsule.

There are four choices of interface that you can choose from when buying a hard drive

from Seagate (or most other brands): ATA (also called IDE); SCSI; Serial ATA (SATA);


sur 12 22.10.10 20:41


3/12

and SAS (Serial Attached SCSI). The latter two have some interoperability (SATA drives

will work with SAS controllers and SAS drive backplanes, and many low-end SAS drives

are actually SATA models with a few changes to their controller boards), and both are

quickly taking over as the interface of choice in servers. SAS drives work best in RAID

arrays, not as single drives, so it's quite rare to see them used in workstations. Thus, I

think it's fair to say that any SAS drive could be safely called "server-grade."

SATA drives exist in a kind of limbo. While they're a direct successor to ATA, their

enhanced performance and simplified interface connection has expanded their role in

computing. The vast majority of laptops and desktops being sold today use SATA hard

drives, but many low- and mid-range servers offer them as well. Specifically, Seagate

offers two categories for its 3.5" SATA drives: AS and NS (you can tell which category a

Seagate drive belongs to by looking at the end of its model number, which will end in one

of those two suffixes). Seagate also separates SATA drives into several product lines,

based on various factors (such as intended market or controller board generation; for

example, at the time of this writing Seagate had four product lines for its AS-series 3.5"

drives: 7200.9, 7200.10, 7200.11 and 7200.12). In the end, though, the category a drive

is in determines, roughly, its intended purpose.

AS-series drives are, for the most part, considered for desktop use. They have the lowest

MTBF (mean time before failure) and the lowest cost. NS-series drives are the next step

up, offering longer MTBF and are better-suited for running 24x7, but at the cost of noise

and heat output. Seagate rates the ST3500630AS drive as having an MTBF of 700,000

hours; the ST3500630NS -- the same drive that came in my Time Capsule -- is rated for

1.2 million hours.

So, at least for the drive in the 500GB Time Capsule, it seems pretty accurate to call it

"server-grade" since it's effectively the best SATA drive Seagate makes (at least for now),

and in my own experience is very popular for use in data centers.

But there's an even better question to ask: Does Time Capsule even need a "server-

grade" drive to begin with? Those Seagate NS drives are rated for 1.2 million hours MTBF,

which, if operated continuously, would mean a drive would fail, on average, every 137

years or so. Even if run continuously, a Seagate AS-series drive would run, on average,

for 80 years before failing. I'm not sure about you, but my Time Capsule will likely have

long since been removed from duty by the time either 80 or 137 years rolls around. (The

reason higher MTBF is important in servers is that most of them have more than one

drive. RAID arrays are designed to be redundant in that a drive can fail without affecting

the integrity of the data on the rest of the drives, but in many cases, two simultaneous

drive failures is enough to lose everything. Higher MTBF, simply enough, makes it less

statistically probable for multiple drives to fail within a limited period of time from each

other.)

So, MTBF doesn't really matter from a statistical standpoint when it comes to Time

Capsule. It also doesn't really matter from a practical standpoint either, in that Time

Capsule itself is designed to be a backup of data that exists elsewhere. Just by owning a

Time Capsule and using Time Machine, the hard drive in either your computer or Time

Capsule can fail and your data will be safe.

One factor that does affect hard drive longevity is heat. Apple actually negated the

benefits of using a "server-grade" hard drive in the Time Capsule by implementing poor

case ventilation. "Server-grade" drives are intended to be installed in servers that have


sur 12 22.10.10 20:41


4/12

well-designed internal ventilation, and many of those servers are installed in climate-

controlled data centers. Desktop-class drives run cooler and are designed for use in

systems with less ventilation.

While not a concern when it comes to longevity, noise is also a design consideration that

Apple had with the Time Capsule but ultimately contradicted with its choice of hard drive.

Its internal fan is variable-speed and temperature-controlled, so it will only turn on whenthe hard drive gets to a certain temperature, and even then will only spin as fast as

necessary to keep the temperature below a certain threshold. A drive that runs hotter to

begin with will make the fan run more often and faster, and thus be more noisy. Also,

"server-grade" drives are also often designed without regard to their noise output as,

again, most will see duty inside a data center, where noise level doesn't really matter.

There's also one more, somewhat minor concern with using a "server-grade" drive in

Time Capsule: Power draw. Time Capsule was designed, thankfully, with an internal AC

power supply, meaning that a "wall-wart" AC-to-DC transformer isn't necessary. However,

the power supply inside Time Capsule is pretty small; I certainly wouldn't want to try to

power a 15,000-rpm SAS drive off of it. "Server-grade" drives will tend to draw morepower than desktop-class drives, which would cause Time Capsule's power supply to work

harder and run hotter, which would cause the fan to run more often...you get the idea.

So, since we've thoroughly dissected why "server-grade" drives in Time Capsule actually

can be counterproductive, let's look at the qualities we'd want in a drive ideal for Time

Capsule:

1. Large capacity. One of the best features of Time Machine is that it not only grabs a

"snapshot" of everything on your hard drive, but it will also back up changed files every

hour. That means, if your computer's hard drive dies, you can restore your data back to a

point in time no later than an hour ago. Also, you're able to restore individual files backto any point in time, so if you're working on a file, save a change, and suddenly realize

you just overwrote other parts of the file you wanted to keep, you can restore just that

file from the last time it was backed up -- again, no later than an hour ago. But having a

large-capacity drive in Time Capsule is useful for storing not just the "snapshot" of your

whole computer, but also all of those incrementally-changed files that get backed up

every hour. Add to that the fact that one of Time Capsule's main selling points is that you

can back up multiple Macs to it, and suddenly it becomes even more important to have a

large drive. 500GB is the bare minimum size I'd want in Time Capsule; 1TB is much

better.

2. Cool-running. For reasons explained above, an ideal drive would need to run with a

minimum of heat generation.

3. Energy-efficient. This is one of the buzzwords bantered about all the time these days,

and it can get a bit annoying. Yes, it would be nice for a hard drive to use less power so

as to help the environment. But an energy-efficient drive also makes Time Capsule's

power supply work a little less hard.

4. Quiet. Unless the drive runs hot, Time Capsule will not start its internal fan, meaning

any noise you hear from it is being generated by the drive itself. If your Time Capsule sits

within earshot (like mine), a loud hard drive can be distracting, especially when it spins

up and down.

5. Performance doesn't matter. Generally with computing, you want to get the best bang


sur 12 22.10.10 20:41


5/12

for your buck. The faster, the better. But in the case of Time Capsule's hard drive, speed

doesn't matter at all, as any drive you put in it will never reach its maximum throughput.

This is because all of the data in and out of Time Capsule goes through gigabit Ethernet,

which has a theoretical maxmimum of 125MB per second. In reality, though, that figure is

much lower. In a real-life test, I got a maximum of 12.58MB per second in a transfer of

700MB of data from my iMac to Time Capsule via gigabit Ethernet. Even the slowest SATA

drive on the market won't impede backup performance, so there's no reason to sacrificethe above four qualities for speed that you won't even use.

So now that I've made you read all that, I can tell you that ultimately I chose to replace

the drive in my Time Capsule with a 1TB Western Digital WD10EADS. It's the second

generation of their "GreenPower" series of drives, and is far superior to its predecessor,

the WD10EACS, in many ways (while only costing about $10 more). It also meets all of

the above qualities for an ideal Time Capsule drive. 1TB of storage is plenty for my

needs, and at a cost of $110, the upgrade cost is pretty reasonable (considering Apple

charges an additional $200 for a 1TB Time Capsule over the 500GB model, and by

upgrading yourself you get to keep the drive you pull out of your Time Capsule too).


sur 12 22.10.10 20:41


6/12

Figure 2. Western Digital WD10EADS 1TB "GreenPower" SATA hard drive.

Swapping the drive is pretty simple, but a little tricky without guidance. Here's how to do

it.

First, if you plan on selling or giving away the old drive from your Time Capsule, or

otherwise don't want the data it contains to be accessed by anyone, skip to step 15 below

to see how to format it. Then come back here.

1. Set something down on your work surface to protect Time Capsule's casing from

scratches -- a towel or even an antistatic bag should suffice.

2. Disconnect all of the cables from your Time Capsule and lay it upside-down, with the

ports facing you.

3. The screws that we need to remove are hidden underneath the rubber base of the

Time Capsule. The base is held on with a simple layer of strong, but removable, adhesive.

Getting the adhesive warm helps soften its grip, so use a hair dryer or heat gun to gently

warm the rubber base. Don't get it too hot, just get it reasonably warm. I got my heatgun at Home Depot for $30 in the paint section. No matter what, do not use a chemical

adhesive remover (like Goo Gone), as the metal plate underneath is perforated and it'll

end up dripping inside.


sur 12 22.10.10 20:41


7/12

Figure 3.Use a hair dryer or heat gun to warm the rubber base and soften the adhesive

securing it.

4. Pry up a corner of the rubber base and start to slowly peel it away from the metal

plate underneath. Don't pull too hard or too fast, or let the adhesive get too cool, or else

the rubber base can tear (trust me on this). If necessary, reheat the area where the base

and bottom plate are still stuck together as you peel the base off.

5. If you applied enough heat when peeling the base off, most of the adhesive will have

stayed on the base itself and can be reused -- it's pretty sticky stuff. Set the base aside

for reinstallation later.

Figure 4.Time Capsule with rubber base removed.

6. Use a #0 Philips screwdriver to remove the screws circled here. This is the only size

screwdriver, and only other tool, you will need for this project. (My #0 screwdriver is a

Craftsman model 41649.)


sur 12 22.10.10 20:41


8/12

Figure 5.The screws to remove so the Time Capsule can be opened.

7. Carefully pick the metal base plate up and hinge it to your right. Be careful -- the fan

is still attached to the bottom plate, and the cable connecting it to the Time Capsule is

short. You'll end up with your Time Capsule splayed open like this:


sur 12 22.10.10 20:41


9/12

Figure 6.Time Capsule with base removed.

8. Before you can pull the old hard drive out, you need to remove the thermal sensor

Time Capsule uses for the fan. It's held to the drive with a plastic bracket, stuck down

with a piece of self-adhesive foam. Carefully peel the foam off of the drive, and the

bracket will come with it. The adhesive on the foam is also strong enough to be reused on

the new drive. Here is what the foam and sensor, removed from the drive and flippedupside-down, looks like:

Figure 7.The thermal sensor that controls Time Capsule's fan operation, with #0

screwdriver for scale.

9. Pick up the edge of the drive closest to the front edge of the Time Capsule (that is, the

edge facing away from you) and tilt the drive towards you. The power and data cables for

the drive are short, so you don't want to damage them. Both cables' plugs are just

friction-fit onto their respective connectors on the drive.

10. With your screwdriver, remove the four standoffs from the bottom of the old drive.

When Time Capsule is sitting right-side up, these standoffs fit into rubber grommets in

the metal bottom plate, which helps isolation-mount the drive to mitigate vibration (and

thus, noise). Install these standoffs onto your new drive.

11. Connect the new drive the same way you disconnected the old one, and lay it into the

drive cavity.

12. Depending on which replacement drive you're installing, you may have to reinstall the

temperature sensor in a different area on the drive than where it came off of the old one.

I'd recommend reinstalling it closer to the middle of the drive (where the spindle motor

is) than the outside edge, so the fan will kick in sooner rather than later as the drive

heats up. Remember to keep the flat side of the thermal sensor against the surface of the


sur 12 22.10.10 20:41


10/12

drive casing.

Figure 8.Time Capsule with new WD hard drive installed.

13. Flip the metal bottom plate back into place, and reinstall the screws. All of the screws

for the bottom are the same size, so you don't have to worry about getting them back

into the same holes they came out of.

14. If the adhesive on the rubber base is still sufficiently tacky, simply line up an edge of

the base and press it back into place. If the adhesive is trashed, either some thin

double-sided tape or rubber cement (applied to the rubber base, not the metal platedirectly) should be enough to keep it stuck on.

15. You're all done with the hardware portion of the upgrade. Now, all you have to do is

plug the cables back into your Time Capsule, and after it boots, launch AirPort Utility from

the Utilities folder on your Mac. Select your Time Capsule from the left pane, then click

the Manual Setup button.

16. Click on the Disks tab at the top, and you'll notice that there's nothing listed under

"Time Capsule Disk" in the disk list, though the "Capacity:" field to the right should list

the size of the hard drive you installed. You need to format the drive before it can be

used, so simply click on the Erase button.


0 sur 12 22.10.10 20:41


11/12

Figure 9.AirPort Utility's drive configuration page.

17. Now, give the drive a name in the next dialog and choose Quick Erase. If you'reformatting the old drive before removing it, the Zero Out Data option is more secure, in

that it will prevent casual snoopers from getting any of the backed-up data you may

already have on the drive. This option will take significantly longer than Quick Erase --

several hours or more, depending on if you have a 500GB or 1TB Time Capsule.

Figure 10.Formatting options for Time Capsule drive.

18. When it's done formatting, you're all set!

After installing the WD10EADS in my own Time Capsule, the fan never turned on duringthe initial backup of my iMac, about 250GB of data. The top of the casing feels much less

warm with the drive running than it did when the original Seagate drive was installed, but


1 sur 12 22.10.10 20:41


12/12

the biggest improvement is in the noise output. I used to be able to hear the Seagate

spin up, seek, and spin down very clearly, even from 4 or 5 feet away; with the

GreenPower drive, I have to be within about a 1-foot radius of the Time Capsule and be

paying attention in order to hear it at all. I also haven't noticed any change in backup

speed from the old drive to the new.

Overall, I still think Time Capsule is a good product; while $300 is a good chunk ofchange to drop on a draft-N wireless router with built-in 500GB hard drive, the fact it ties

in with Time Machine so nicely, and works with multiple Macs, makes it worth it. Drop

another $100 on a cool-running, quiet terabyte drive, and you'll not only save $100 over

Apple's 1TB Time Capsule, but get a superior end result -- and a spare 500GB hard drive

to boot.


Date post:	07-Apr-2018
Category:	Documents
Upload:	max01fr
View:	218 times
Download:	0 times

Cracking Open the Time Capsule

Documents