8
Simply clever CRAYLER BM * )
Simply clever
CRAYLER BM
*)
Building materials
Technical capacity in development and consistent orientation to the requirements of operating practice are the fundamentals for the
CRAYLER BM. Numerous economic and application-related advantages speak for this new-generation transportable forklift.
The solution for a wide range of loading and unloading applications
For medium and long haul transportation
Recycling
Transporting potting compost
Refrigerators
Special duty
Optimal weight distribution allows greaterstability and safe operation of the CRAYLER BM
The truck and trailer can be backed up toloading docks and loading ramps
The under frame stowage box gives you more deckspace thus allowing more room for long payload
Ready for operation in 30 seconds
5 sec 15 sec
2430
1100-1600
1950
810
Hmin.=1925mm
No conversion work is necessary on the carrier vehicle
The transport in the under framestowage box gives the CRAYLER BMa longer service life
Optimal dead weight / payload ratioOperation by radio remote control
Technical Data CRAYLER BM
Dimensions (l/w/h) 2430/1950/1925 mm 96’’/ 77’’/ 76’’Max. lifting capacity Up to 2100 kg / 4630 lbs.Motor Diesel, 25.3 kW / 34.4 HPMax. lifting height 2850 mm / 112”Dead weight From 1485 kg / 3273 lbs
25 sec 30sec
The CRAYLER BM can be mobilized anywhere and at any time
On a semitrailer
Swap-body truck
On a trailer
Volume transport
Rigid truck
Bar configuration on truck tractor
4-axle rigid truck
On a light trailer
Tailor-made solutions through various capacity and equipment options
www.palfinger.com
The forklifts illustrated are in some cases fitted with extra equipment or for specific countries and do not always represent the standard version.Country-specific regulations must be observed in respect of installation. Dimensions may vary. Subject to technical changes, errors and translationmistakes. *) max. 1200 operating hours respectively and in accordance with the terms and conditions of PALFINGER‘s warranty and guarantee forPALFINGER CRAYLER.
KP-
CR
BM
M3+
EE
10/0
8, K
10/
08, D
10/
08
Revolutionary andfunctional design
