Standard

Off Centre (OC)

ptsize

ptsize

Min. Centre

Multicrease (MC)

ptsize

ptsize

3.0 mm

PRIME Creasing Matrix

Amake

systems

today. market the

on creasing stable and accurate most the of one Prime SKOR materials synthetic high-end and cotton cellulose, fibre of mixture

creasing

•of

• • • • •

Cost-effective.

runs. production long ensures Prime SKOR

plate. cutting die the on residue no leaves adhesive Strong

width. nelchan and depth channel in tolerance high Extreme

paper. backing the of removal easy and Quick

markings. board prevents and sheet, every flow free a assures channel the of angle degree 40 The

channel. the with rule

the of alignment perfect a allows locator advanced The•

wb

or X2

a

= +

d a=

TYPES OF MATRIX

HOW TO CALCULATE MATRIX DEPHT AND WIDTH

Locator

Matrix

Chamfered edge

Thin film baseSelf adhesive

Finger lift release paper

Matrici per cordonare - Creasing Matrix

PrimeAvailable sizes inseveral

Offcentre

PRIMEAVAILABLE SIZES

-------------0.65 x 1.3 mm0.65 x 1.4 mm0.65 x 1.5 mm0.65 x 1.6 mm0.65 x 1.7 mm0.65 x 1.9 mm0.65 x 2.1 mm0.65 x 2.3 mm0.65 x 2.5 mm0.65 x 2.7 mm0.65 x 3.0 mm0.65 x 3.2 mm0.65 x 3.5 mm0.65 x 4.0 mm0.65 x 4.5 mm0.65 x 5.0 mm0.65 x 6.0 mm0.65 x 7.0 mm0.65 x 8.0 mm-------------0.7 x 1.3 mm0.7 x 1.4 mm0.7 x 1.5 mm0.7 x 1.6 mm0.7 x 1.7 mm0.7 x 1.9 mm0.7 x 2.1 mm0.7 x 2.3 mm0.7 x 2.5 mm0.7 x 2.7 mm0.7 x 3.0 mm0.7 x 3.2 mm0.7 x 3.5 mm0.7 x 4.0 mm0.7 x 4.5 mm0.7 x 5.0 mm0.7 x 6.0 mm0.7 x 8.0 mm------------0.8 x 1.5 mm0.8 x 1.6 mm0.8 x 1.7 mm0.8 x 1.9 mm0.8 x 2.1 mm0.8 x 2.3 mm0.8 x 2.5 mm

0.8 x 3.0 mm0.8 x 3.2 mm0.8 x 3.5 mm0.8 x 4.0 mm0.8 x 4.5 mm0.8 x 5.0 mm0.8 x 6.0 mm0.8 x 8.0 mm

1.0 x 5.0 mm1.0 x 6.0 mm1.0 x 8.0 mm------------1.2 x 3.0 mm1.2 x 3.2 mm1.2 x 3.5 mm1.2 x 4.0 mm1.2 x 4.5 mm1.2 x 5.0 mm1.2 x 6.0 mm1.2 x 7.0 mm1.2 x 8.0 mm------------1.4 x 3.0 mm1.4 x 3.2 mm1.4 x 3.5 mm1.4 x 4.0 mm1.4 x 4.5 mm1.4 x 5.0 mm1.4 x 6.0 mm1.4 x 7.0 mm1.4 x 8.0 mm------------1.6 x 3.0 mm1.6 x 3.2 mm1.6 x 3.5 mm1.6 x 4.0 mm1.6 x 4.5 mm1.6 x 5.0 mm1.6 x 6.0 mm1.6 x 7.0 mm1.6 x 8.0 mm

------------0.3 x 0.6 mm

0.3 x 1.0 mm0.3 x 1.1 mm0.3 x 1.2 mm0.3 x 1.3 mm0.3 x 1.4 mm0.3 x 1.5 mm0.3 x 1.6 mm0.3 x 1.7 mm0.3 x 1.9 mm------------0.4 x 0.6 mm0.4 x 0.8 mm

0.4 x 1.1 mm0.4 x 1.2 mm0.4 x 1.3 mm0.4 x 1.4 mm0.4 x 1.5 mm0.4 x 1.6 mm0.4 x 1.7 mm0.4 x 1.9 mm-------------0.45 x 0.8 mm0.45 x 1.0 mm0.45 x 1.1 mm0.45 x 1.2 mm0.45 x 1.3 mm0.45 x 1.4 mm0.45 x 1.5 mm0.45 x 1.6 mm0.45 x 1.7 mm0.45 x 1.9 mm------------0.5 x 0.8 mm0.5 x 1.0 mm0.5 x 1.1 mm0.5 x 1.2 mm

Board Thickness>150 micronBoard100-150 gr.

White

0.3 x 0.8 mm

Board Thickness150-250 micronBoard150-200 gr.

White

Board Thickness200-400 micronBoard200-275 gr.

White

0.5 x 1.3 mm

------------0.5 x 0.8 mm0.5 x 1.0 mm0.5 x 1.1 mm0.5 x 1.2 mm

0.5 x 1.4 mm0.5 x 1.5 mm0.5 x 1.6 mm0.5 x 1.7 mm0.5 x 1.9 mm0.5 x 2.1 mm0.5 x 2.3 mm--------------0.55 x 0.8 mm0.55 x 1.0 mm0.55 x 1.2 mm0.55 x 1.3 mm0.55 x 1.4 mm0.55 x 1.5 mm0.55 x 1.6 mm0.55 x 1.7 mm0.55 x 1.9 mm0.55 x 2.1 mm0.55 x 2.3 mm--------------0.6 x 1.0 mm0.6 x 1.1 mm0.6 x 1.2 mm0.6 x 1.3 mm0.6 x 1.4 mm0.6 x 1.5 mm0.6 x 1.6 mm

0.6 x 1.9 mm0.6 x 2.1 mm0.6 x 2.3 mm0.6 x 2.5 mm0.6 x 2.7 mm0.6 x 3.0 mm0.6 x 3.2 mm0.6 x 3.5 mm0.6 x 4.0 mm0.6 x 5.0 mm0.6 x 6.0 mm0.6 x 7.0 mm0.6 x 8.0 mm

Board Thickness450-650 micronBoard335-400 gr.

White

------------1.0 x 2.3 mm1.0 x 2.5 mm1.0 x 2.7 mm1.0 x 3.0 mm1.0 x 3.2 mm1.0 x 3.5 mm1.0 x 4.5 mm

Board Thicknessfor microflute

White

0.8 x 2.7 mm

Board Thicknessfor corrugated and pressed board thick

White

1.0 x 4.0 mm

0.3

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.8

1.0

1.2

1.4

1.6

0.5

0.4 x 1.0 mm

0.6 x 1.7 mm

SKOR www.dycartec.nl F 26 353 52 35 0031 • 25 353 52 35 0031 T • info@dycartec.nl •

Dycartec by distributed is