CreativePGM Display Catalog

407-855-0202

RE

TR

AC

TO

R D

ISP

LAYS

2

Free Carrying Case!

Pole sections held together by an elastic cord for easy set-up & storage

Double Poles for the Economy 48" provides additional support

ECONOMY TABLE TOP RETRACTOR

When floor space is limited, the Economy Table Top Retractor will keep your message front and center. Designed to accommodate a 24" or 36" high banner and portable enough to take almost anywhere.

ECONOMY RETRACTOR

The perfect displays for occasional trade shows, meetings or presentations. These banner displays are portable and lightweight, designed to set up quickly wherever you go. The Economy Retractors are available in five convenient sizes.

your message

to display

Description Color Options Viewable Size(W x H)

Economy 24" Black 24" x 78.5"

Economy 31.5" Black/Silver 31.5" x 78.5"

Economy 33.5" Black/Silver 33.5" x 78.5"

Economy 36" Black/Silver 36" x 78.5"

Economy 48" Silver/Black 47.5" x 78.5"

Economy Table Top Silver/Black 24" x 24" or 24" x 36"

Economy Retractor Accessories

Economy Light Kit 12v/50 Watts

Hard Carrying Case 41.25" W x 8.5" H x 7" D

RETRACTORSRetractors are an excellent choice when you need a display that is portable and easy to carry or ship. With a retractor, your banner is protected during shipment and transportation. Each of our retractors are available with a custom digitally printed banner that rolls tightly into the base and readily pulls out for quick display.

FREE! Soft Carrying Case with all Retractors

ECONOMY RETRACTOR LIGHTImprove visibility of the Economy Retractor Displays with the addition of the Economy Light. Kit includes an extra halogen bulb

ECONOMY RETRACTOR HARD CASEThe specially designed case is made of molded plastic and includes a flip latch to securely close.

See how quick & easy it is to set up a Retractor Display!

Visit www.creativedisplaysite.com for product instructional videos.

Lightweight & Portable

Pull Graphic Up

Attache Pole

Hook at the Top Ready to Display

With an additional pole segment it can display a 24" or 36" high graphic

Adjus

table

24" h

or 3

6" h

24" Economy 31.5" Economy 33.5" Economy 36" Economy

Color Options

Silver

Black

48" Economy

3

RE

TR

AC

TO

R D

ISP

LAYS

Free Carrying Case!

Free Carrying Case!

Free Carrying Case!

Description Color Viewable Size (W x H)

Deluxe Telescoping Retractor - Single Silver 33.5" x 61.5"-78.75"

Deluxe Telescoping Retractor - Double Silver 33.5" x 61.5"-78.75"

Deluxe Telescoping Retractor - Single Wide Silver 46.5" x 61.5"-78.75"

Deluxe Telescoping Retractor - Double Wide Silver 46.5 x 61.5"-78.75"

DELUXE TELESCOPING RETRACTOR - SINGLE OR DOUBLE SIDED OPTIONS

Built for the frequent user and with a sleek design. This retractor is our only display that is available in both single sided or double sided models. Perfect for trade shows and presentations, the display remains solid with a winged base foot to ensure maximum stability. The adjustable twist lock pole allows for variation in banner height up to 78.75" high.

Quick and easy set up with twist lock telescoping pole

Available in single or double sided models

STANDARD TELESCOPING RETRACTOR

Provides flexibility with its telescoping pole, allowing adjustability in your custom banners 62.5" up to 79" in height. Perfect for multiple uses and allows for multiple banner changes if needed.

thumb-lock clamp

Additional banners can be printed and easily installed for multiple uses

PROLITE PLASTIC BASE RETRACTOR

The plastic base offers strength and durability all while staying inexpensive and lightweight. The sleek footless base design is both stylish yet extremely strong. The metallic black look will bring attention to your message.

Durable plastic base in stylish metallic black


Standard Telescoping Retractor

Black/Silver 31.5" x 62.5"-79"


ProLite Plastic Base Retractor Black 33.25" x 82.5"

Pole sections twist to secure pole height

Telescoping pole with thumb-lock clamp ensures a quick set to pole height

Double Deluxe Telescoping Retractor

Single Deluxe Telescoping Retractor

Adjus

table

61.5"

- 78

.75" h

Adjus

table

62.5"

- 79

" h

Retractor Display Instruction & Set Up videos found at

www.creativedisplaysite.com

Color Options

Silver

Black

Pole sections held together by an elastic cord for easy

set-up & storage

Super strong plastic base that is both durable & economical!

Black Base

Silver

RE

TR

AC

TO

R D

ISP

LAYS

4

Increase message space by adding a 34" w x 4"h Base Graphic

Description Viewable Size (W x H)

Supreme Telescoping Retractor 33.5" x 36"-86"

Description Viewable Size(W x H)

Superb Telescoping Retractor 33.5" x 32"-78"


Excellent Telescoping Retractor 33.5" x 30"-78.5"


ViewPoint Telescoping Retractor 33.25" x 33.5"-78.75"

SUPREME TELESCOPING RETRACTOR

The heavy duty base and twist lock telescoping pole ensures this retractor will be used again and again. Also the easy to use spring tension button allows you to set your banner tension to avoid sagging. Banners can be easily changed to even further extend the life of this great display.


Two winged support feet ensure superior stability

SUPERB TELESCOPING RETRACTOR

A perfect mix of form and function with a sleek base and durable high-quality design. The fully telescoping pole allows for adjustability in your banner height. The retractor is small enough to be used as a tabletop display also. When banner changes are required, a new banner can easily be snapped into place.


The removable roller cartridge allows for multiple pre-wound banners and safe storage

EXCELLENT TELESCOPING RETRACTOR

This upscale retractor provides functionality and style all in one. The flexibility of the telescoping twist lock pole provides height adjustability up

by adding a custom graphic in the front of the retractor base. Also features the ability to change graphics easily for multiple uses.


Add a custom graphic to the base for additional branding space

VIEWPOINT TELESCOPING RETRACTOR

The low profile base offers a unique, contemporary design. Banner tension is easily adjusted with the turn of a knob and the tension release button allows for long term storage without risk of banner curling. The extensive height range of this display makes it ideal for a table top or floor display.

Multi-section telescoping pole allows for a variety of banner heights

Can also be used as a table top display

4 - Section Telescoping Pole allows for easy set-up & variable

height adjustments


height adjustments

Adjus

table

36" -

86"

h


height adjustments


height adjustments

Color Options

Silver

Black

Adjus

table

32" -

78"

h

Adjus

table

30" -

78.5

" hAd

justab

le 33

.25"

- 78

.75" h

Free Carrying Case!

Free Carrying Case!

Free Carrying Case!Free

Carrying Case!

Easily adjust banner tension with the turn of a knob

Base

Base Base

5

RE

TR

AC

TO

R D

ISP

LAYS

Free Carrying Case!

Free Carrying Case!

DISPLAY LIGHTS

Don't rely on the room's light when you can create the exact light effects on your graphics with your own Light Kit.

Description Power

Clip-On Display Light 12 Volt/50 Watts

LED Display Light 12 Volt /7 Watts-LED

Supreme Light Kit 12 Volt/50 Watts


Jumbo Tall Retractor 47" x 116.5"


Change Agent Telescoping Retractor 36" x 69"-80"

JUMBO TALL RETRACTOR

With a viewable graphic area 47" wide by 116.5" tall, this display works perfect at product launches, trade shows or conventions. Despite its the large size, the Jumbo Tall Retractor is as easy to transport as a standard-sized retractor.

presence at over 10 feet high

A single person can simply attach pole and pull banner up out of the base to display

CHANGE AGENT TELESCOPING RETRACTOR

Recommended if you require a display for more frequent message changes. Quick and easy banner changes are made with the use of Velcro™. The banner attaches quickly to the bottom leader and offers an inexpensive means for using multiple banners with one display.

Twist-Lock telescoping pole for easy height adjustments

Velcro™ base allows for multiple banners to be used in a single display

CLIP-ON DISPLAY LIGHT

The vertical clip attaches to any display with a vertical support bar. The flexible cord allows you to control the lighting angle. UL listed.

LED DISPLAY LIGHTS

lights for displays. Includes individual power supply. Thumbscrew bracket easily attaches to almost any banner display pole.

SUPREME LIGHT KIT

Made specifically for

and comes with two 50-watt bulbs and protective case. UL listed.

Free Carrying Case!

Pole sections twist to secure

pole height

Adjus

table

69" -

80"

h

Silver Base

Banner attaches with Velcro™ for quick banner change out


Battery Operated Endless Ad 30.88" x 146.25"

BATTERY OPERATED ENDLESS AD

Put your message in motion with our highly mobile and quiet Battery Operated Endless Ad. The virtually silent motor keeps the display in motion for up to 72 hours on a single charge.

Includes 12V DC Rechargeable Battery Power Pack

Battery Pack

Base

6

BA

NN

ER

DIS

PL

AYS

Style Display Use Adjustable Height

Viewable Size(W x H)

Everyday Banners or rigid signs 12" to 90" 18"-36" x 12"-90"

Heavy Duty Made with heavier materials for added strength and weight 48" to 90" 18"-36" x 48"-90"

Table Top Smaller for counter and table use 24" to 45" 18"-24" x 24"-45"

Everyday w/Foldable Foot For easy transport 12" to 90" 18"-36" x 12"-90"

Accessories Dimensions

Everyday Carrying Case 48" x 7" x 3"

EVERYDAY BANNER DISPLAYS

The name says it all when you require versatility, look no further than the Everyday Banner Displays. The Everyday, Heavy Duty and Table Top Displays accommodate both banners and rigid substrate signs and can be used as one or two-sided displays. Perfect for applications that require a semi-permanent display placement. The Everyday version is also available with a foldable base for the added benefit of portability. Extremely sturdy when the legs are expanded and compact when folded for easy transport.

Accommodates both banners and rigid substrate signs

Highly adjustable graphic size, fits banners 18" w up to 36"w

EVERYDAY CARRYING CASE

Convenient pockets are sewn on the inside to securely hold all the display parts. Made from luggage-quality polyester with heavy duty shoulder straps for easy transporting from place to place.

Everyday Carrying Case - Closed

Everyday Carrying Case - Open

Everyday - SilverHeavy Duty

Table Top

Everyday with Foldable Foot

Thumbscrew allows for easy telescoping of pole for adjusting height

Pole pockets & dowels in banners allow for easy banner install

CURVED CANTILEVER DISPLAY

This stable yet attractive design allows you to display

banners by the two grommeted holes on the curved metal hooks. Excellent for retail applications when customers need to see your message from both sides.

up in minutes

Height fully adjustable by simply twisting the thumbscrew

Finish banner with #2 grommets and simply slip over hooks

EVERYDAY SNAP RAIL DISPLAY

Now the Everyday Banner Display is easier than ever to use! With the snap rail design a banner can be installed with no additional

banner into the rails and attach to the

to create a single or double sided display.

and available in 24" and 30" wide.

quick setup and banner changes

Description Graphic Size(W x H)

Snap Rail Display - 24" 24" x 12"-72"

Snap Rail Display - 30" 30" x 12"-72"

Description Graphic Size(W x H)

Curved Cantilever Display 24" x 46"-84"

Snap Rails make for quick & easy banner changes

Single sided use

Double sided use

Everyday Display Instructions & Set Up videos found at


7

BA

NN

ER

DIS

PL

AYS

X-CEPTIONAL BANNER DISPLAY

An extremely versatile "X" display that allows you to showcase banners of different sizes on one cost-effective display.

Telescoping arms accommodate banners from 20" to 35" wide and 45" to 72" high.

Allows for multiple banner sizes

EURO-X BANNER DISPLAY

The most sturdy and stylish of our "X" displays. It assembles in minutes and is available in three sizes.

Thick Aluminum Leg provides added stability

Available in three sizes

SUPER-SIZED BANNER DISPLAY

Provide up to 10 feet of space with this versatile display. Each side has the ability to hold different size banners for a truly unique two-sided display.

Lightweight fiberglass reinforced plastic and metal weighs just 6 lbs.


Super-Sized Banner Display 48" x 35" - 118"

Adjus

table

35" -

118"

h


Tripod 1 24" x 48"

Tripod 2 24" x 60"

Tripod 3 24" x 70"

Tripod 4 32" x 72"

TRIPOD BANNER DISPLAY

With its professionally finished appearance and quick setup, this lightweight display makes a great addition to any trade show exhibit. Accommodates many graphic sizes with four size options.

Lightweight fiberglass and plastic construction - weighs just 5 lbs.

Portable - sets up in seconds


X-Ceptional 20"-35" x 45"-72"


Euro-X 1 31.5" x 70"

Euro-X 2 23.5" x 70"

Euro-X 3 31.5" x 79"

TRI-X BANNER DISPLAY

A very affordable and sturdy "X" display with a small footprint that performs best in corners and low traffic areas.

Extremely lightweight

Available in four sizes

POPULAR "X" DISPLAYSLooking for a display that is cost effective and assembles in minutes? Then consider one of our great "X" displays. They are perfect for trade shows, lobbies and retail stores. Also the display’s four arm hooks allow you to quickly exchange your grommeted banners when required.

"X" Banner Display Instruction & Set Up videos found at



Tri-X 1 31.5" x 70"

Tri-X 2 23.5" x 70"

Tri-X 3 23.5" x 60"

Tri-X 4 31.5" x 79"

24" x 48" 24" x 60" 24" x 70" 32" x 72"

Free Carrying Case!

Free Carrying Case!

Free Carrying Case!

Free Carrying

Case!

Free Carrying Case!

8

BA

NN

ER

DIS

PL

AYS


A Mini X Banner Display 11" x 17"

B Mini Pro Retractor Display 11.75" x 16.75"

C Deluxe Mini Retractor 8.25" x 16"

D Mini Bamboo X Display 9.75" x 16"

E Mini Bamboo Retractor 8.25" x 12"

C. DELUXE MINI RETRACTOR

Attach Banner with Banner Tape

A. MINI X BANNER DISPLAY

Zipper Case Included

Attach Banner with Grommets

B. MINI PRO RETRACTOR DISPLAY

Elegant Design

Attach Banner with Banner Rail and Tape

D. MINI BAMBOO X DISPLAY

Attach Banner Grommets

E. MINI BAMBOO RETRACTOR

Attach Banner with Banner Tape

MINI BANNER DISPLAYS

ELEGANT "L" BANNER DISPLAY

A simple design to be both practical and attractive. The twist lock telescoping pole presents banners up to 87" high. Assembles quickly by simply snapping the banner into the rails.

perfect for tight spaces.

Quick and easy to setup

Twist lock telescoping pole

87" high

Sturdy Heavy Duty Base

Description Viewable SIze(W x H)

Elegant "L" Banner Display 35.5" x 40" - 87"

Free Carrying Case!

Free Carrying Case!

ADJUSTABLE BANNER DISPLAY

The 360˚ Adjustable Banner Display offers a unique new display solution. The banner attaches like a typical "X" display but the center hub allows the banner to rotate 360 degrees or tilt up or down. Placed on a telescoping pole, the height is adjustable from 42" up to 72". When table space is limited the 360˚ Adjustable Banner Display is ideal to place behind the table as a great backdrop for your message.

Rotates 360˚

Adjustable Height


360˚ Adjustable Banner Display 36" x 78", 36" x 62", 40" x 75", 48" x 72"

Can rotate 360˚

Display Vertically... or Horizontally

HORIZONTAL TABLE TOP RETRACTOR

the case to reveal your rolled up graphic inside. The hard case become the support system for your graphic and the sturdy feet fold down to keep the unit perfectly balanced. Weighs less than 6 lbs and totes with a side handle.


Horizontal Retractor 38" x 33.25"

Retracts into its own Carrying Case

Fast & easy setup professional looking table top display

A B C D E

9

BA

NN

ER

DIS

PL

AYS

Free Carrying Case!

Free Carrying Case!

BAMBOO WOOD DISPLAYS

100% Renewable, Bamboo is sure to maximize your display's visual impact while contributing to a much greener planet. Bamboo Displays are long-lasting, attractive and extremely strong.

Bamboo Display Instruction & Set Up videos found at


BAMBOO L DISPLAY

Attract attention with this uniquely designed display constructed of almost 100% renewable bamboo. The display is lightweight as well as quick and easy to set up. It offers a clean floor-to-ceiling presentation of your message.

No tools required for set up

High stability base prevents tipping


Bamboo L Display 31.5" x 71"


Bamboo X Banner Display 24" x 63"

BAMBOO X BANNER DISPLAY

Made of renewable bamboo, this display provides the quickest and easiest banner set-up. While lightweight, the broad footprint created when the banner is attached ensures display stability.

Quick and easy set up

Renewable bamboo wood construction with high-impact plastic support hub

Banner attaches with #3 grommets

Includes soft bag

BAMBOO RETRACTOR BANNER DISPLAY

choice for your display needs. Providing the same high performance attributes as other retractor displays, you will be amazed at the ease of use combined with the high-end wood finish.

with a high-end wood finish

to your message

banner up out of the base to display


Bamboo Retractor 33.25" x 76.75"

10

BA

NN

ER

DIS

PL

AYS

Free Carrying Case!

Free Carrying Cases!

Free Carrying Cases! Free

Carrying Cases!

FOUR SEASON TREK RETRACTOR

An outdoor advertising solution that is durable and easy to set-up. This heavy duty display includes detachable feet that when locked into the base provides a strong and stable footprint. Use the provided ground stakes to anchor the display securely into the ground.

Brushed Aluminum base

Twist-Lock telescoping pole for easy height adjustments

Ground stakes provided to secure into the ground

Base


Four Season Trek Retractor 33.25" x 77.25"


Four Season Ballast Double Retractor31.5" x 62.75"31.5" x 70.75"31.5" x 78.75"


Four Season Retractor 31.5" x 61"-77.75"

FOUR SEASON BALLAST DOUBLE RETRACTOR

not in use. The graphic is housed within the base and pulls out when you are ready to

the banner and attach it to the support bar. What’s more, this one unit accommodates your choice of one or two banners. Height adjusts to three different levels with the touch of a button.

Easy to move rolling base

Wheeled Base

FOUR SEASON X DISPLAY

Designed to withstand outdoor conditions including wind and rain. The telescoping pole is adjustable and the base is a lightweight tank with an easy-to-fill and easy-to-empty water opening.

Banner attaches with grommets

Adjusts from 50" up to 70" high


Four Season X Display 33.5" x 50"-70"

FOUR SEASON RETRACTOR

set up makes it ideal for day-to-day use when signage needs to be put away frequently. Base fills with sand or water to keep the display in place. Adjustable height from 61" up to 77.75".

Wheeled base makes relocation a breeze

11

BA

NN

ER

DIS

PL

AYS

Square

Description Available Frame Dimensions

Square Banner Frame 4', 6', 8', 10', 12', 15', 20'

Triangle Banner Frame 4', 6', 8', 10', 12', 15', 20'

Round Banner Frame 6.58', 8.22', 9.87', 11.51', 14.8', 16.45'

Round

Triangle

HANGING BANNER FRAMES

Quickly and easily hang a message with the

banner vinyl, they are flexible in size and

Triangle designs.

Lightweight and durable

The frame accommodates banners of any height

Made of galvanized steel rods with metal connectors

EUROFIT FABRIC HANGING BANNERS

hanging square, triangle or round configuration for trade shows or events. The lightweight frame is easy to put together using push button poles. The stretch fabric graphic simply zips over the frame for

Triangle designs

Lightweight & easy to setup with push button poles

Collapses for easy storage and transport

Includes harness assembly, ready to hang

Description Frame Size Viewable Size (W x H)

6' Round 6' diameter x 3' h 218.6" x 36"

8' Round 8' diameter x 3.5' h 301.57" x 42"

10' Round 10' diameter x 4' h 377" x 48"

12' Round 12' diameter x 4' h 452.36" x 48"

8' Square 8' w x 3.5' h 384" x 42"

8' Triangle 8' w x 3.5' h 288" x 42"

Case is designed to hold all components & graphic

Offer a solution that will really make an impact at trade shows and events

Description Specifications

Heavy Duty Hanging Banner Rotation Motor

Speed- 2 rpm, Weight capacity 200 lbs.

HEAVY DUTY HANGING BANNER ROTATION MOTOR

with our smooth banner rotation motor.

Provides two revolutions per minute

Attaches to the ceiling and bottom ring of frame

8' Square

10' Round- 4 Sizes Available

8' Triangle

The zipper offers strength to create a taut banner

12

TR

AD

ES

HO

W D

ISP

LAYS

Free Carrying Case!

SLEEK EXHIBITOR DISPLAY

slimmer design for lightweight banners. It is an economic display while still offering all the stability and durability of the other displays. The display telescopes in height from 56" to 98" and adjusts in widths from 55" to 100". A versatile display for trade show back walls, events, and presentations.

Black

Colors Available:

Silver

Description Overall Size (W x H)

Graphic Size (W x H)

Sleek Exhibitor 55" up to 100" x 56" up to 98"

52" up to 97" x 52" up to 94"

3 Displays

2 DisplaysKit consists of a top and bottom pole connector

Design Multiple Configurations for a Variety of Uses

2 Displays 3 Displays 3 Displays 3 Displays 4 Displays 4 Displays

SHED SOME LIGHT ON YOUR DISPLAY!

EXHIBITOR EXPANDING DISPLAY SYSTEMS

Create a truly flexible and influential marketing presence with the Exhibitor Expanding Displays. By simply twisting the poles, the display frame changes dimensions to accommodate banners of various sizes. Use as a single unit or group together to create banner displays, advertising towers, room dividers, backdrops and even complete trade show booths. The Exhibitor Narrow telescopes in height from 39" to 101" and in width from 31" to 51". While the Exhibitor telescopes in height from 40" to 100" and to an amazing width of 57" to 122".

Telescopes with easy to use twist poles

Easy set-up

Durable & strong

Description Overall Size (W x H)

Graphic Dimensions (W x H)

Exhibitor Narrow 31" up to 51" x 39" up to 101" 27" up to 47" x 34" up to 96"

Exhibitor 57" up to 122" x 40" up to 100" 52" up to 117" x 37" up to 97"

Description Power

Universal Display Light 12v/50 Watts

LED Trade Show Lights - Single 12v/7 Wats - LED

LED Trade Show Lights - Double 12v/7 Wats - LED

SLEEK EXHIBITOR ATTACHMENT KIT

needed to easily connect multiple displays to create an expanded presence. Perfect for backdrops, trade show booths and presentations. Available in Black.

ExhibitorExhibitor Narrow

Telescopes from 56" - 98" in height and from 55" - 100" in width

Universal Display Light LED Trade Show Light

Single

Double

Teles

cope

s in h

eight

from

39" t

o 101

"

Adjusts from 31" to 51" wide

Foot Depth 17.5"

Exhibitor Narrow

Teles

cope

s in h

eight

from

40" t

o 100

"

Adjusts from 57" to 122" wide

Foot Depth 17.5"

Exhibitor

TR

AD

ES

HO

W D

ISP

LAYS

13

Free Carrying Case!


Jumbo Wide Retractor 94.75" x 79"


5' Wide Maxim Retractor 60" x 81.5"




Triple L Curved Display 94.5" x 78.75"

JUMBO WIDE RETRACTOR

Creates an instant backdrop by simply pulling out your banner and hooking it to the two support bars. The Jumbo Wide Retractor is perfect for your branding messages behind speeches or presentations or as the foundation for your trade show booth.

provides an extra large space for your message

help of two people pull banner up out of the base to display

TRIPLE L CURVED DISPLAY

The easiest set-up of a large backdrop display. The three displays connect together with magnets at the top and bottom creating a perfect back wall display. Easy to assemble and extremely lightweight, it is the perfect solution for portable, large format messages.

Three full color custom banners provides extra space for your message

Made of lightweight aluminum

MAXIM RETRACTORS

Project your message on a grand scale with a contemporary look. The sleek base provides a complete floor-to-ceiling look keeping all eyes on the message. Available in three "mega" widths, your large format graphics have never been easier to display.

Contemporary Base Design The 8' Wide Maxim Retractor has third pole for stability

Free Carrying Case!

Magnets snap out from top and bottom rail to connect

banners with hook and loop to create a curved display

Silver Base

14

TR

AD

ES

HO

W D

ISP

LAYS

Free Carrying Case!

SPLASH FABRIC DISPLAYS

and bring attention to your booth. They come complete with a full color graphic printed on a wrinkle resistant fabric that attaches to the frame with hook and loop. When expanded, the fabric is taut, wrinkle free and completely covers the frame. Trade show tear down is quick and easy because the whole display folds easily into a compact carrying case.

LIGHTWEIGHT AND PORTABLE FABRIC DISPLAYS!

Description Display Size(H x W x D)

6' Curve Table Top 66" x 60" x 18"

8' Curve Table Top 94" x 60" x 22"

8' Curve Floor 94" x 89" x 22"

10' Curve Floor 110" x 89" x 28"

6' Straight Table Top 60" x 60.25" x 23"

8' Straight Floor 89" x 89" x 11.5"

10' Straight Floor 125" x 89" x 11.5"

10' Straight

10' Curved

Graphic Installation with Velcro™ makes setup a breeze

Collapses into a compact unit

Easy to use connectors ensure proper setup

8' Curved Table Top6' Straight Table Top8' Curved8' Straight

GEOMETRIX FABRIC DISPLAYS

Offer the excitement of three dimensions with the ease of use that comes with a pop-up display. With interchangeable custom banners, it can create

installed dye-sublimated, poly-stretch fabric graphic panels.

Weighs 50% less than most standard pop-up displays

Made of lightweight aluminum

Easy change, machine washable fabric banners

Description Product Size (w x h x d)

12-quad w/10 banners 119.38" x 90.5" x 11"

9-quad w/9 banners 90.5" x 90.5" x 11"

3-quad w/3 banners 31.5" x 90.5" x 11"

9-quad w/9 banners 90.5" x 90.5" x 11"

12-quad w/10 banners

9-quad w/9 banners3-quad w/3 banners9-quad w/9 banners

Ships with fabric banners attached- sets up in seconds!

Fabric banners attach to both front and back hubs to add dimension

Reinforced corners fit over hub buttons for quick changes

Free Carrying Case!

TR

AD

ES

HO

W D

ISP

LAYS

15

TR

AD

ES

HO

W A

CC

ES

SO

RIE

S

PROMOTION COUNTER

Made from strong corrugated plastic, this counter is both durable and lightweight. The wrap-around wall is perfect for printed

oval top and bottom are made of molded plastic and the unit includes a convenient middle shelf. This economical unit breaks down to fit easily in a corrugated carrying case.

Description Overall Size (W x H x D)


Promotion Counter 38.5" x 31.75" x 20" 64.5" x 37.5"

Description Overall Size (W x H x D)

Graphic Size(W x H)

Case-To-Podium Display 33.7" x 33.6" x 20" 100" x 33.625"

Middle Shelf

CASE-TO-PODIUM DISPLAY

A unique case to counter design that is ideal for trade shows and events where extra counter and storage space is required. The case is made of durable

for easy transport. When ready to use simply unpack the customizable rigid plastic graphic and the case turns into the counter. This gives you extra table space while allowing storage of brochures and pamphlets underneath.

Storage Space Under Counter Top Durable wheels make it easy to take anywhere

CASE TO COUNTER KIT

The Case to Counter Kit converts your oval carrying case into a finished podium for your booth. Add carpeted panels available in matching colors or custom imprint your message to securely wrap around the case.

Fast & easy set up in less than 10 minutes!

THE SHOW ‘N RISE DISPLAY

Developed for the exhibitor who requires the simplicity of a pop-up and

panels are available in four colors and ready to attach your graphics.

All display frames are made of high grade aluminum and hinged magnet rails for complete magnet-to-magnet coverage

Lifetime Warranty on display frames


6' Tabletop Show ‘N Rise 72" x 62"

8' Floor Show ‘N Rise 97" x 92"

10' Floor Show ‘N Rise 120" x 92"

Colors Available:

Black PMS Black 6

Gray PMS 429

Blue PMS 280

Imperial Blue PMS 281Blank Carpeted Wrap Graphic Case-to-Counter UltraFit Case-to-Counter

Hardware Only - Aluminum design with magnet rails

Fabric Full Panel Kit - Textured, Velcro™ receptive polyester fabric

Center Panel Mural Kit - Full color laminated panels, fabric end caps & case wrap

Full Panel Mural Kit - Full color laminated panels & case wrap

DISPLAY OPTIONS

16

TR

AD

ES

HO

W D

ISP

LAYS

Free Carrying

Case!

Free Carrying Case!

SHOW ‘N WRITE

receptive fabric side and flip the dry erase side to illustrate important points. Comes in a 6' tabletop display or if space is limited, the 4' Presenter. Includes a soft carrying case.

SHOW ‘N FOLD

loop receptive fabric on both sides so that your graphics evenly fix to both sides of the display. Includes a soft carrying case.

FAST TRAK

features a lightweight plastic frame and double-sided hook

to do is unfold your display, fasten the header and attach your graphics. The detachable header can be used on any of the three panels and the seamless design gives a truly professional appearance.

Description Size (W x H)

Panel Size (W x H)

Header Size (W x H)

Fast Trak 1 Tabletop Display

72" x 48" 24" x 36" 24" x 12"

(3 panels) (1 panels)

Fast Trak 2 Tabletop Display

54" x 37" 18" x 29" 18" x 8"

(3 panels) (1 panels)

Description Size (W x H)

Panel Size (W x H)

Header Size (W x H)

4' Presenter Tabletop Display

54" x 33" 18" x 25" 18" x 8"

(3 panels) (1 panel)

6' Show ‘N Write Tabletop Display

72" x 48" 24" x 36" 24" x 12"

(3 panels) (1 panel)

6' Show ‘N Fold Tabletop Display

72" x 48" 24" x 36" 24" x 12"

(3 panels) (1 panel)Information is easily changed on the write-on wipe-off background 6' Tabletop Show ‘N Write

White Marker board front

Hook & Loop Receptive Fabric

Hook & Loop Receptive Fabric

4' Presenter Tabletop Display

6' Show ‘N Fold Tabletop

Colors Available:

Black PMS Black 6

Gray PMS 422

Blue PMS 2728

Colors Available:

Black PMS Black 6

Blue PMS 287

TR

AD

ES

HO

W D

ISP

LAYS

17

Free Carrying Case!

Free Carrying Case!

Description Height

Chrome 48"

Aluminum 47"

BAG HOLDERS

Have your tote bags at the ready with these attractive Bag Holders. The Aluminum Bag Holder collapses down into a convenient carrying case.

Chrome Aluminum- Collapses into Carrying Case

SHOWGOER ROUND TABLES

Tables make setting up an event or trade show effortless. The steel frame and molded plastic top offers a durable design yet folds up easily for storage or transport.

Description Dimensions

Café Height Round Table 31.5" dia, 29.5" tall

Bar Height Round Table 31.5" dia, 42.5" tall

Description 6' Size(W x H)

8' Size(W x H)

Over The Top Header 74" x 18" 97.5" x 18"

Over The Top Back Wall 74" x 43.25" 97.5" x 43.25"

Over The Top Tall Back Wall 74" x 67.75" 97.5" x 67.75"

Description Overall Size(W x H)

Single BannerSize (W x H)

4' Display 54" x 29" 17.75" x 27.25"

6' Display 70" x 37" 22.75" x 34.75"

SHOWGOER LITERATURE CART

Perfect for carrying loose items to and from your trade show booth. The folded unit is just 3" thick, but expands to a generous 16" x 16" rolling box.

OVER THE TOP TABLE TOP DISPLAY

Create multiple looks with our largest, most stylish table top display. The adjustable frame expands from 6' to 8' in height and clamps onto any table top.

Adjustable frame with push buttons

Easily clamps onto table tops with thumb screw - no tools required

Two-sided fabric graphics slides over frame to display

LATTICE BAMBOO TABLE TOP DISPLAY

Our most lightweight and economical table top display made of environmentally friendly bamboo. The three individual banner displays, when placed together, create a compete table top backdrop. The banner angles are adjustable ensuring perfect viewing every time.

4' display creates a 54" w x 29" h backdrop

6' displays creates a 70" w x 37" h backdrop

ExpandedSize

CollapsedSize

NA 15.5" x 14" x 3"

eeryinge!

Easy to use thumb screws to clamp on to table edge

Adjusts 74" or 97.5" wide

Adjus

ts 71

" or 9

5.25

" high

6' Table 8' Table

Frame adjusts to fit any 6' or 8' table. Add a Table Throw to complete the look, see pgs. 18-19

Over the Top Header shown on 8' UltraFit Table Throw - see pg. 19

Over the Top Tall Back Wall shown on 8' Standard Table Throw - see pg. 18

Over the Top Back Wall shown on 8' UltraFit Table Throw - see pg. 18

Coordinate your look by adding a colorful table

throw from page 18

TA

BL

E T

HR

OW

S

18

1 or 2 Color Thermal Imprint

Full-Color Thermal Imprint

Style 6' Table Size (W x H x D)

8' Table Size(W x H x D)

Thermal Imprint Size (W x H)

Standard 72" x 29" x 30" 96" x 29" x 30" 50" x 17"

Economy 72" x 29" x 30" 96" x 29" x 30" 50" x 17"

Fitted 72" x 29" x 30" 96" x 29" x 30" 50" x 17"

TABLE THROWS

Stylish and elegant, Table Throws professionally present your company or event's image. Made of premium, quality polyester twill, these table throws are easy to care for, washable and easy to store and ship. Throws are made to fit 6 ft or 8 ft tables and drape to fit the standard 30" high table.

CHOOSE A THROW COLOR SELECT AN IMPRINTING METHOD PREPARE YOUR ARTWORK

STANDARD THROW With 1 Color Imprint

STANDARD SATIN With 2 Color Imprint

FITTED THROW With Full-Color Imprint

ECONOMY THROW With Full-Color Imprint

STAIN & WRINKLE RESISTANT

WASHABLE

FLAME RETARDANT

EASY TO STORE AND SHIP

Table Throw Instruction & Set Up videos found at www.creativedisplaysite.com

Table Throw Fabric Colors

†White Navy Blue - PMS 2767

Ivory - PMS Cool Gray 1 Hunter Green - PMS 625

Yellow - PMS 1235 Gray - PMS 422

Red - PMS 201 †Black

Burgundy - PMS 504 Charcoal Gray - PMS 425

Purple - PMS Violet Beige - PMS 728

Kelly Green - PMS 625 Orange - PMS 1505

Blueberry - PMS 647 Lime Green - PMS 375

†Royal Blue - PMS 661 Magenta - PMS Process Magenta

†Available in Satin

*PMS numbers are for reference only and may vary slightly from actual material color

1 or 2 Color Thermal imprints

Full-Color Thermal

Dye Sublimation

VECTOR VS RASTER

Thin lines or highly detailed

More than 2 PMS colors

Photographic image

COMPLEX ART Depending on the art file, it is not always possible to print complex art using our Thermal & Screen Imprinting Processes. See examples below.

Full-Color Dye Sublimation Imprinting

TA

BL

E T

HR

OW

S

1919

FULL BLEED DYE SUB Style: 8' Standard Table Throw

FRONT PANEL DYE SUB Style: 6' Fitted Table Throw

Description Dimensions(W x H x D)

Imprint Area(W x H)

Convertible Table Throw 1 or 2 Color Thermal 96" x 29" x 30" 50" x 17"

Convertible Table Throw Full-Color Thermal 96" x 29" x 30" 50" x 17"

Convertible Table Throw Full-Color Dye Sublimation 96" x 29" x 30" 154" x 88"

CONVERTIBLE TABLE THROWS

With its adjustable side panels, this two-in-one throw fits both 6 ft and 8 ft tables. The Convertible Table Throw won't leave any display short no matter which table ends up in your booth. The adjustable side panels fold and wrap around 6 ft tables for a crisp look and when unfolded it provides a neatly draped appearance for an 8 ft table. All imprinting methods available to give you the ultimate variety in customization.

FULL-COLOR DYE SUBLIMATION TABLE THROWS

Print an unlimited color palette or designs with photography or gradients right on the fabric table throw with the Full-Color Dye Sublimation process. Printed on white polyester twill your images are sure to pop! Choose to print over the full throw or for a more cost-effective solution print only the front panel.


Front Panel Imprint Area

(W x H)

Full Bleed Imprint Area

(W x H)

6' Table Throw 72" x 29" x 30" 50" x 17" 130" x 88"

8' Table Throw 96" x 29" x 30" 50" x 17" 154" x 88"

ULTRAFIT TABLE THROWS

The dramatic fitted look of the UltraFit Table Throws are sure to bring attention at your trade show or event. Fitting snuggly over most standard tables, the polyester stretch fabric creates a unique and wrinkle-free look. The full length vertical back zipper allows for easy access to store supplies under your table.

Description DimensionsFront Panel

Imprint Area(W x H)

Full Bleed Imprint Area

(W x H)

6' Table Throw 72" x 29" x 30" 50" x 17" 130" x 88"

8' Table Throw 96" x 29" x 30" 50" x 17" 154" x 88"

Imprinted Full Throw shown on a 6 ft Table

Zipper allows throw to be loose enough for installation and fully

taut when complete

Reinforced sleeves slip under table legs to secure Poly-Stretch Throw

Fold and wrap the adjustable side panels around a 6 ft table or leave unfolded to fit on an 8 ft table

1 Color Convertible Throw shown on a 6 ft Table

Back

TA

BL

E T

HR

OW

S

20

DECOBRITE™ NYLON TABLE COVERS

Decobrite™ Nylon offers a sleek matte finish that is perfect for trade shows and presentations. One of the 12 bright colors are sure to match your other presentation graphics and complete your booth presence.

Upscale Look

Matte Finish

12 Gorgeous Colors

Great for food demonstrations & events

STANDARD TABLE RUNNERS

Accent your table cover or throw for that extra finishing touch. Made from polyester twill or satin in your choice colors, these table runners are available in two widths. Plus, they are washable, lightweight, flame retardant, stain and wrinkle resistant, and easy to store and ship. Runners are customizable with 1 or 2 Color Thermal, Full-Color Thermal or Full-Color Dye Sublimation. Imprinting details on pages 18 & 19.

Description Style 6' Size (W x H x D)

8' Size (W x H x D)

Decobrite™ Nylon Table Covers 4-Sided 6' or 8' 72" x 29" x 30" 96" x 29" x 30"

TABLE THROW CARRYING CASE

Tote your table throws, covers or runners in a convenient carrying case. Both varieties are made from vinyl-backed polyester so are incredibly durable and weather resistant. With the Tubular style, you roll the coverings over a shipping tube and slip it in the bag. The Rectangular style requires simple folding.


Rectangular Case 13" x 17"

Tubular Case 5" x 38"

57" 2 Color Runner over 8' Table Throw

28" Full-Color Dye Sub Runner over 6' Table Throw

Description 28" x 80" Runner Imprint Area (W x H)

57" x 80" Runner Imprint Area (W x H)

1 or 2 Color Thermal 24" x 17" 42" x 17"

Full-Color Thermal 24" x 17" 42" x 17"

Full-Color Dye Sublimation 28" x 80" 57" x 80"

Decobrite™ Nylon Colors

White Light Blue

Gray Hunter Green

Black Burgundy

Purple Red

Dark Blue Yellow

Royal Blue Kelly Green

*Actual colors may vary slightly from examples shown. Call for samples.

Over the Top Backwall shown on 8' UltraFit Table Throw

Over the Top Header shown on 8' UltraFit Table Throw

Over the Top Tall Backwall shown on 8' Standard Table Throw

OVER THE TOP TABLE TOP DISPLAY

Create multiple looks with our largest, most stylish table top display. The adjustable frame expands from 6' to 8' in height and clamps onto any table top.

Description 6' Size(W x H)

8' Size(W x H)

Over The Top Header 74" x 18" 97.5" x 18"

Over The Top Back Wall 74" x 43.25 97.5" x 43.25"

Over The Top Tall Back Wall 74" x 67.75" 97.5" x 67.75"

INTE

RIO

R D

ISP

LAYS

21

BAMBOO LITERATURE HOLDER

Stylishly display your literature with this four-tiered, eco-friendly floor display rack. Simply remove the rack from its case, unfold to a height of 48" or 53" and load your literature. Perfect for the office, retail spaces, trade shows and conventions.

Holds 8.5" x 11" literature

No tools required for set up

Folds and stores into compact metal carrying case

Description Dimensions (W x H x D)

Bamboo Literature Holder 11.5" x 48 or 53" x 18"

THE CLEAR VIEW LITERATURE DISPLAY

Literature is 100% visible in the Clear View. This 10" x 10.5" x 16" box-like device actually pulls up and locks in place to become a four-tiered literature holder. So compact, it fits into a zip topped carrying case that totes like a backpack. The attractive chrome base is incredibly sturdy, while the durable clear acrylic literature holders allow you to show off your printed materials.

Holds 8.5" x 11" literature

Displays literature on both sides!

Works great for literature of varying sizes and thicknesses

Five ½" deep pockets


Clear View Literature Display 9" x 56.5" x 10"Literature Displays & Easel Set Up Videos at

www.creativedisplaysite.com ADJUSTABLE FLOOR AND TABLETOP EASELS

The most popular easels used today! Display your signs, boards and posters on these easels that are suitable for tabletops or floor displays. They are versatile, durable, lightweight, portable and easily assembled. The telescoping legs are stabilized by a locking center brace and supported by non-skid rubber leg caps. All easel dimensions are adjustable.

LIGHT DUTY EASEL

Description Product Dimensions

Graphic Size

Light Duty Easel 20" W x 66" H Up to 32" H

BAMBOO EASEL


Graphic Size

Bamboo Easel 43" W x 73" H Up to 43" H

STANDARD EASEL


Graphic Size

Standard Easel 20" W x 66" H Up to 32" H

JUMBO EASEL


Graphic Size

Jumbo Easel 25" W x 72" H Up to 40" H

INTE

RIO

R D

ISP

LAYS

22

LED LIGHT BOX

Create an illuminated experience with LED technology! These sleek and popular displays provide a bright, even glow that uses 80% less power than fluorescent bulbs. The snap frame design allows for quick and easy graphic changes. Perfect for trade shows, offices and retail spaces.

Description Viewable Size Frame Size

Light Box 1 23.5" x 17.5" 25.6" x 19.6"

Light Box 2 27.5" x 21.5" 29.6" x 23.6"

Light Box 3 35.5" x 23.5" 37.6" x 25.6"

Description Viewable Size Frame Size

Crystal Edge Light Box 1 8" x 14" 13.75" x 19.75"

Crystal Edge Light Box 2 19" x 25" 24.75" x 30.75"

All four frame edges flip up for quick front-loaded graphic changes. Edges flip back

down to hold your graphic tightly!

Front Load Frame Flip up edges to easily change graphics

Front Load Frame

POSTER FRAMES

So simple to use, you don’t even have to take the frame off the wall. The Front Load Frame edges flip up for quick graphic changes. Simply slide the graphics into the Top Load Fame via the concealed top-loading slot. Both Frames come complete with a corrugated plastic backer and clear plastic graphic overlay.

Description Graphic Size Frame Size

Front Load Frame 1* 11" x 17" 12.75" x 18.75"

Front Load Frame 2 17" x 22" 18.5" x 24"

Front Load Frame 3 22" x 28" 23" x 29.5"

Front Load Frame 4 24" x 36" 25.5" x 37.5"

Top Load Frame 1 8.5" x 11" 10" x 12.25"

Top Load Frame 2* 17" x 22" 18.5" x 23.25"

Top Load Frame 3 22" x 28" 23.25" x 29.25"

Top Load Frame 4* 24" x 36" 25.25" x 37.25"

* Available in Black only

Black

Colors Available:

Silver

Top Load Frame Slide Graphic into top-loading slot

Top Load Frame

CRYSTAL EDGE LIGHT BOX

This radiant frame is sure to draw attention day or night. The acrylic frame is LED illuminated and its beveled edge allows light to extend out to the edge creating a "halo effect". The frame can easily be displayed using the stand-off mounts or wall mounting chain. Ready to display horizontally or vertically.

Graphics can be easily changed- no tools required

LED power lasts over 50,000 hours

Includes UL listed AC adaptor plug

Light extends out illuminating the entire frame

Loosen bolts to slide out graphic Acrylic frame with beveled edges

INTE

RIO

R D

ISP

LAYS

23

RIGID SUBSTRATE FLOOR HOLDER

For an upscale look for any rigid graphic, the Rigid Substrate Floor Display is a portable and lightweight option. Aluminum design with a bottom knob to tighten the halves together to firmly hold rigid graphics up to 1-1/4" thick. Displays include soft padded carrying case and are available in two sizes. Multiple displays can be used in a series for larger graphic sizes.

Description Display Size (W x H)

Rigid Substrate Floor Holder - 6" Pair 6" W

Rigid Substrate Floor Holder - 20" Single 20" W


Free Standing Sign Holder - 24" W 9" x 24"

Free Standing Sign Holder - 36" W 9" x 36"

Rigid Substrate Floor Holder- 6" Pair

Rigid Substrate Floor Holder - 20" Single



Pedestal Snap Frame 11" x 34"-50" 11" x 8.5"

Pedestal Sign Display 22.25" x 66" 22" x 28"

Flat Base Sign Display 22.25" x 59" 22" x 28"



Rectangular Tubing Sign Display - Single 23.25" x 59" 22" x 28"

Rectangular Tubing Sign Display - Triple 25" x 90" 22" x 28"

PEDESTAL SNAP FRAME

With the Pedestal Snap Frame, you don’t even need a wall to post signage. This innovative product is actually a snap frame mounted on a stand. It securely holds a 11" x 8.5" sign either vertically or horizontally and even telescopes in height. Perfect for lobbies and restaurants. Height adjustable from 34" to 50".

PEDESTAL SIGN DISPLAY

This 22" x 28" chrome sign holder is an excellent investment, as it will last for years. The stylish round base provides sturdy support for a rigid substrate with graphics on both sides.

FLAT BASE SIGN DISPLAY

The Flat Base Sign Display allows you to display a highly visible single or double sided 28" x 22" sign while taking up only a small amount of floor space.

RECTANGULAR TUBING SIGN DISPLAYS

Use the same amount of floor space to display one or three 28" x 22" signs. All units are made of sturdy rectangular tubing to give solid structural support to your messages. Because graphics are visible from both sides, these displays are perfect to grab attention in an entryway, lobby or store. Both displays also available in a black or chrome finish.

Single Triple

Interior Display Instruction & Set Up videos found at www.creativedisplaysite.com

FREE STANDING SIGN HOLDER

Made of 100% black powder-coated steel, this durable sign holder holds any rigid substrate sign up to 1" thick. Designed for easy set up and high traffic areas.

Pedestal Snap Frame

Pedestal Sign Display

Flat Base Sign Display

Black

Colors Available:

Chrome

Free Standing Sign Holder - 24" W

Free Standing Sign Holder - 36" W

EX

TE

RIO

R D

ISP

LAYS

24

SNAP A-FRAME

The Snap A-Frame is the perfect solution when you require an attractive temporary display. Perfect for conventions and walkways, the Snap A-Frame features the fastest and easiest way available to change graphics on the fly and easily folds up for storage.

SNAP A-FRAME

These light-duty A-Frames weigh half as much as the popular Signicade, and are perfect for when you have to move your sign frequently. The Simpo Sign II offers easier graphic installation by simply sliding into frame grooves.



Snap A-Frame 25" x 45" 23.62" x 33.34"



Fold-Up A-Frame 24" x 44.5" 24" x 33"

FOLD-AWAY COMPACT A-FRAME

The Fold-Away Compact A-Frame is lightweight and compact. It collapses down to a compact size for easy storage and transport. Simply add two corrugated signs and you have a durable, temporary sign that can be used both indoors and outdoors.

Simpo Sign I

Simpo Sign II simply slide sign into display


Viewable Size (W x H)

Simpo Sign I 23" x 33.5" 22" x 28"

Simpo Sign II 34" x 36" 22" x 26.75"

SIGNICADE SIGN KIT

Customize your Signicade as often as you wish without having to print new graphics. Letters and numbers slide in and out of plastic grid.Kit Includes:

314 - black 4" letters, symbols and red numbers

22 - red 8" numbers and % symbol

2 - red 9" double-sided headers – Sale and SpecialSignicade Sign Kit

WhiteBlack

Colors

SIGNICADE DELUXE A-FRAME

The durable and portable Signicade Deluxe is perfect for outdoor uses. Change signs in seconds without the hassle of tape or screws. Legs allow for sand or water to be added to create ballast. Displays two signs and easy to set-up with locking hinges for additional stability.



Signicade Deluxe 27" x 46.375" 24" x 36"

Rigid Sign slides easily into slots for a secure fit

SIGNICADE A-FRAME

The Signicade is one of our best selling exterior sign displays. This durable signage features snap-off plugs that make it easy to fill with sand or water for ballast. The unit holds 24" x 36" signs on each side that are easy to change. Also includes a molded-in handle and hinges that lock for increased stability. Well nuts available for easy sign installation.



Signicade 26" x 45" 24" x 36"

WhiteOrange Yellow

Colors

EX

TE

RIO

R D

ISP

LAYS

25

OUTDOOR HORIZONTAL A-FRAME

Stand out from the crowd at outdoor events with the Horizontal A-Frame. This temporary outdoor banner display sets up quick without the need of tools. The A-Frame supports two banners and includes the bungee cords needed to securely fasten your banners. To prevent any movement while in use, ground stakes are also included. All parts are packaged in a convenient nylon carrying case and available in two sizes.

Description Display Size (W x H x D)


Small 51" x 38" x 24.75" 46" x 33" With #2 Grommets

Large 101" x 38" x 24.75" 94" x 33" With #2 Grommets

SUPERSTRONG

The strongest A-Frame available, the Superstrong is made of ½" black powder coated angle iron. It even includes a carrying handle for easy transport.



Superstrong I 24.5" x 19.5" 24" x 18"

Superstrong II 24.5 x 42" 24" x 36"



Easy Slide Angle Iron Frame 24" x 41" 24" x 18"

Large

Small

EASY SLIDE ANGLE IRON FRAME

This best selling exterior sign frame is made from heavy-duty one foot flat steel iron and really stands up to the elements. Changing signage is a snap, simply slide in a rigid substrate up to 6 mm thick and it stays put. No hardware required and no pieces to lose.

Displaying signage is as simple as sliding it into the frame

Free Carrying Case!

T-STAKE

The T-Stake allows you to attach practically any size rigid substrate to the top bar using two screws. A great all-around solution to keep on hand for a variety of installs.



T-Stake 17.5" x 42" Max: 24" x 18"

OUTDOOR RIGID SIGN BASE

Made of durable plastic, the Outdoor Rigid Sign Base provides a unique yet simple way to display rigid signs outdoors. Fill the base with water to provide a stable display. Accepts rigid media such as corrugated plastic from 4 mil to 10 mil thick.


Outdoor Rigid Sign Base 24" x 36"

Exterior Display Instructions & Set Up videos found atwww.creativedisplaysite.com

EX

TE

RIO

R D

ISP

LAYS

26

Spring mounted base flexes in the breeze

SPRING FLEX BANNER FRAME

The Spring Flex Banner Frame's perfect design allows your graphics to flex in the wind on a spring mounted frame without any additional ballast. Simply tie down the edges of your banner to the frame to attach. Banners with grommeted holes are recommended to prevent damage.

Light weight and easy to move



Spring Flex Banner Frame 32" x 51" x 48" D 24" x 44" (ea.) - 2 banners or 24" x 90" - 1 banner

OUTDOOR ANCHORED BANNER FRAME

Designed to give more permanent advertising options while offering the versatility to change banners when needed. The strong aluminum frame can be bolted down into concrete for use on drive-thru islands and sidewalks. The crossbars adjust from 13½" to 23½" wide in 1" increments, while offering three heights - 72", 73" & 74". Banners change out quickly with the snap lock horizontal bars providing the opportunity to change banner messages with the seasons or for special promotions.



Outdoor Anchored Banner Frame Max-26" x 76" 13.5" to 23.5" w (1" increments) x 72", 73", 74" h


Four Season Dual Trak Display 23.6" x 76.8"


Four Season Glider 24"-40" x 60"-78"

FOUR SEASON DUAL TRAK DISPLAY

Attracting attention with over 7 feet of graphics, outdoor messages are sure to be noticed. The spring mounted base offers flexibility in light winds and the wide footprint offers maximum stability.

Includes complete hardware and tools for assembly

Steel frame design with steel flex springs

Includes nylon carrying case

FOUR SEASON GLIDER BANNER DISPLAY

Raise the bar on outdoor banner displays, named for its ability to glide easily in strong breezes, the mechanism allows your message to take center stage without wind pressure bowing the banner. Fill the sturdy base with sand or water for ballast. The Glider is highly adjustable from 24" to 40" in width and from 60" to 78" in height.

Attach grommeted banner with tie downs

EX

TE

RIO

R D

ISP

LAYS

27

The Ballast Base can be filled with water or sand

CURB FLEX SNAP FRAME

Set up an outdoor sign and forget about it. The Curb Flex Snap Frame features both flexible springs and heavy duty base, insuring your sign will not tip over even in the windiest weather. The snap open frame makes graphic changes equally worry-free.



Curb Flex Snap Frame 30.25" x 48.5" x 51" 28" x 44"

FOUR SEASON FLEX SIGNS

Quick graphic changes, coupled with the strong spring mechanism provides a display option like no other. The snap frame feature makes changing graphics as easily as opening and closing the edges. A sturdy footprint ensures the display will not tip. For added durability or if your signage needs to be moved frequently, the easily portable ballast base option is available.

S

s ap ics

ity



Four Season Flex Sign 24" x 46" x 29" 23.4375" x 33.125"

Four Season Flex Sign w/Ballast Base 31" x 48" x 20" 23.625" x 33.4375"

Description Pole Heights Viewable Size

In-Ground Banner Frame 5' or 8' For use w/banners 4' - 20' W x 4'-5' H

IN-GROUND BANNER FRAME

The In-Ground Banner Frame is easy to assemble and store. All the pieces of its lightweight frame simply snap together for quick assembly. A stronger solution than the In-Ground Banner Post, this silver aluminum frame features an additional pipe across its top. Perfect for use as real estate signs, political banners, events and construction sites.

IN-GROUND BANNER POST

This kit is a quick and easy solution for installing in-ground banners. It’s great for informational signs, real estate signs, recreational trail markings, parking lot signs and construction sites. The fiberglass-like posts are 75% lighter and five times stronger than steel. Plus, they are maintenance free and will never rust or need painting.

Description Pole Height Viewable Size

In-Ground Banner Post 6' For use with banners up to 4' High

Wheels on the Ballast Base make it easy to change your signs location

Snaps open for quick graphic changes

Snap open frame makes graphic changes easy

Exterior Display Instructions & Set Up videos found atwww.creativedisplaysite.com

EX

TE

RIO

R D

ISP

LAYS

28

VERSATILE BRACKET SYSTEM

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms. The fiberglass arms will flex in strong winds—transferring some of the wind load off the banner.

Product Features:Cast aluminum base will not rust

Unique base design will fit square, round or multi-sided poles

A 1° cant has been engineered into the base, top and bottom to keep the banner tight

Fiberglass arms for strength and reduction of wind load on the banner

Stainless steel bands for easy installation

PREMIUM SPRING ARM BRACKET SYSTEM

Patent #6,378,820

Spend more time enjoying the banner lined street and less time installing the banners. Our Spring Arm Bracket System makes installing and changing banners so much easier. Simply flex the rod, slip off the banner and slip on a new one. What’s more, once the banners are mounted, they last longer. The patented stainless steel spring arm design bends up to 60 degrees to deflect the strongest winds. This flexibility helps maintain the integrity of the poles because it keeps the wind load off.

Description Viewable Size

Premium Spring Arm Bracket System - Single Option Up to 30" W

Premium Spring Arm Bracket System - Double Option Up to 30" W

For installations that do not require a Spring Arm Bracket, the Premium Bracket without Spring Arm offers the same stainless steel sleeve to lengthen the life of the rod. For the

longest lasting installations, our Premium Bracket system is the best choice.

WALL MOUNT BRACKET

A Vertical Wall Mount Bracket makes it easy to install banners on walls and other flat surfaces. Bracket is 3" W x 5" H.


Wall Mount Bracket Up to 36" W

CUSTOM BOULEVARD BANNERS & IMPRINTING

Let us help you customize the look of your Boulevard Banners. We'll convert your graphics into dramatic full-color, double-sided digitally printed 18 oz. opaque banners. Standard 3" pole pockets are added on the top and bottom so you can easily attach them to the bracket system. Banners can also be imprinted on Poly-Cotton Banner Material.

Dressing up Main Street is easy to do with our Banner Bracket System.


Versatile Bracket System - Single Option 18", 24", 30" or 36"

Versatile Bracket System - Double Option 18", 24", 30" or 36"

All brackets are single or double banner brackets

Fiberglass Arms

40" Stainless Steel Bands

Pin & Ring

End Caps

Cast Aluminum Bracket

Tie Wraps

Standard Premium Bracket Fiberglass Arm

40" Stainless Steel Bands

Clip Pins, Self-Tapping Screws and Washers

Spring Arm Premium Bracket

FL

AG

S &

EV

EN

TS

2929

PRINTED SPORT SHAPES

The printed corrugated plastic Sport Shapes include a baseball, football, golf ball and soccer ball. Use them to direct traffic to the appropriate playing field or welcome parents or alumni to the game.


Golf Ball 17.5" Round

Golf Ball 23" Round

Golf Cart 23" x 17"

Football 23" x 13.75"

Baseball 17.5" Round

Soccer Ball 17.5" Round

Small Tee 5" x 17"

Large Tee 8" x 17"

Golf tees available in red, yellow, and

white

Components shown for 9-hole kit

9-HOLE AND 18-HOLE GOLF COURSE KITS

Make your next golf tournament, charity event or company outing memorable with these golf course kits. The kits include large corrugated plastic golf balls and tees, step stakes and clips for either 9 or 18 hole events. Golf Balls can easily be imprinted with your logo, names or messages.

Golf tees are available in white, red, or yellow.


9-Hole and 18-Hole Golf Course Kit 17.5" Balls w/Tees

9-Hole and 18-Hole Golf Course Kit 23" Balls w/Tees


Pennant Strings 12" x 18" panels, 105" long

lend

POLYETHYLENE PENNANT STRINGS

TWIST ‘N GRIP

Provide a temporary sign option eliminating the use of adhesives or hanging accessories for long periods of time. The unbelievably strong suction cup attaches to almost any smooth, non-porous surface with just a twist.

Rigid sign attaches by the use of a simple hand screw

Heavy-duty suction cup has a twist/lock mechanism that securely holds your sign

Description Size

Twist 'N Grip 4.5" Dia.

STEP STAKES

Step Stakes are the best way to quickly and easily install your corrugated shapes. Choose between the standard step stakes and the heavy duty U-Top design both styles are ¼" thick.

U-Top

Description Package Size

Standard 4-Gauge 10 or 50

U-Top 9-Gauge 25 or 50

Standard

Standard

YELLOW/WHITE

MULTI

BLUE/WHITE

GREEN/WHITE

RED/WHITE

RED/YELLOW

RED/WHITE/BLUE

FL

AG

S &

EV

EN

TS

30

SAIL SIGNS

Create a dramatic display at your next event or location with Sail Signs. These distinctive shapes flutter in the breeze and have the ability to rotate in their base attracting more attention with their movement. They are ideal for presenting messages both indoors and outdoors. The custom printed banners present high quality vivid images sure to draw attention.

Super-flex fiberglass poles prevent breaking

Banners come with reinforced pole pockets to withstand strong breezes

Available in three sizes and three shapes

Description Overall Size

8' Tear Drop 30" x 99"

11' Tear Drop 38" 138"

14' Tear Drop 52" x 185"

8' Razor 28" x 108"

11' Razor 31" x 153"

14' Razor 35" x 185"

8' Rectangle 30" x 87.5"

11' Rectangle 30" X 119"

14' Rectangle 30" X 173.5"

SAIL SIGN BASES

The wide variety of bases allows you to display your Sail Sign Displays on all types of surfaces, both indoors and outdoors.

Description Application Description Application

Spike Base Outdoor Square Water Ballast Indoor

Cross Base Indoor Vehicle Base Outdoor

Round Water Ballast Indoor Heavy Duty Cross Base Indoor/Outdoor

Front-Correct, Back-Reverse Imprinting

Front-Correct Back-Reverse

Razor Sail Sign w/Cross Base

Tear Drop Sail Sign w/Cross Base & Water Ballast

Spike BaseHeavy Duty Cross Base Vehicle Base

Round Water Ballast Holds 22 lbs

Square Water Ballast Holds 35 lbs

Cross Base Folded

Cross Base

Choose from Spike Base or Cross Base w/Round Water Ballast

Cross Base w/Round Water Ballast is ideal for indoor use or temporary outdoor use

Simply push the Spike Base into the ground to easily mount your Sail Signs outdoors

Outdoor Display Instructions & Set Up videos found atwww.creativedisplaysite.com

Free Carrying Case

FL

AG

S &

EV

EN

TS

3131

5 ft

10 ft

15 ft

20 ft

14'

11'

8'

14'

11'

8'

14'

11'

8'

17'17'

20'

RazorSail Signs

Giant Flex ‘N FlyTear DropSail Signs

RectangularSail Signs

Four Season Banner Displays

Double Retractor“X” Glider Retractor Trek Retractor

pg 10 pg 10 pg 10 pg 10 pg 30 pg 30 pg 30 pg 31 pg 31pg 26

Description Overall Size

Preprinted for 8 ft Razor 33.5" x 92"

Description Flag Size(W x H)

Overall Height (W x H)

8' Flag Kit 26" x 96" 72" up to 180"

10' Flag Kit 26" x 120" 96" up to 240''

PRE-PRINTED FLYING BANNERS

Be certain to grab everyone's attention with full-color, preprinted banners for the 8' Razor Banner Display. Available in three bright and eye-catching designs that you can use either indoors or outdoors.

FLEX ‘N FLY FLAG DISPLAY

Add a flash of color to your business, events and festivals with the Flex 'N Fly Flag. A solid color nylon flag fits securely to the non-conductive fiberglass pole. The cast metal ground stake ensures the pole is mounted firmly in the ground. Available in two kit variations to display a colorful flag from 8 feet all the way up to an amazing 20 feet high.

OUTDOOR BANNER DISPLAY - SIZE CHART

GIANT OUTDOOR BANNER DISPLAY

The Giant Outdoor Banner Display guarantees that no one will pass you by without notice. The telescoping display holds a 41" x 10 foot banner with ease. The rings along the shaft and horizontal banner bar hold the banner open at all times so no one will miss your message. The unit even rotates with the wind so there is no chance of it blowing over. The heavy duty plastic base separates into four pieces so the entire unit is easy to move from place to place.

Built-in ballast, just fill with sand or water

Adjustable height: 10' to 17'


Giant Outdoor Banner Display 41" x 120"

Kits Include:

Flexi-Pole

Ground Stake

Solid Color Nylon Flag Cast metal ground stake for permanently mounting flag pole

Stock Flag Colors Available:

FM Yellow

Black

Spanish Yellow

O.G. Red

Canada Red

O.G. Blue

Royal Blue

Irish Green

Grommeted banner easily attaches to pole with rings

Base divides into 4 pieces for easy transport

Free Carrying Cases!

FL

AG

S &

EV

EN

TS

32

SHOWSTOPPER DELUXE EVENT TENT

A durable, commercial grade steel frame makes this tent ideal for use outdoors. It sets up in minutes with its easy two-person assembly creating an instantly covered space.

Strong steel design with high-strength ABS plastic joints

1.25" thick legs with molded foot

Pebble powder-coated finish

SHOWSTOPPER PREMIUM EVENT TENT

The aluminum design provides a sturdy yet lightweight, portable event space. This is the perfect solution for more frequent users at craft fairs and farmers markets.

Lightweight yet durable rust-free aluminum frame

2" thick hexagon legs with molded foot

Sleek aluminum finish

CANOPY IMPRINTING OPTIONS

Let the crowd know who and where you are! Personalize one, two or all sides of your canopy with custom imprinting. We can imprint the peak, overhang or both with your logo or other branding message. Customize with 1, 2 color or Full-Color Thermal or Full Color Dye Sublimation Imprinting.

Thermal Imprint Full Wall

Description Imprint Area(W x H)

Peaked Top - Thermal Imprint 46" x 17"

Overhang - Thermal Imprint 60" x 8

Peak & Overhang - Thermal Imprint See above

Full Wall - Thermal Imprint 50" x 17"

Full Wall - Dye Sublimation Full Area

Canopy Top - Dye Sublimation Full Area

Full-Color Dye Sublimation Top

Thermal Imprint Peak & Overhang

Description Product Size (W X H X D)

Clearance Height Weight

Premium 120" x 125" up to 137" x 120" 72" up to 84" 46 lbs.

Description Product Size (W X H X D)

Clearance Height Weight

Deluxe 118" x 125" up to 138" x 118" 73" up to 85.5" 59 lbs.

White

Available Top Colors:

Black

Red - PMS 1795

Yellow - PMS 102

Blue - PMS 2728

All Showstopper Event Tents Feature:

ABS glass filled nylon joints and plastic coated metal adjustment buttons

Crank-up canopy top with hook and loop attachments

Push button levers for adjusting pole height

Fire-retardant, weather resistant canopies

Dust cover for storage

Warranty: Deluxe Tent- 2 years Premium Tent- 3 years

SHOWSTOPPER EVENT TENTS

ShowStopper Event Tents provide an instant, no-fuss space and can be used indoors or outdoors. A great solution to offer your customers for craft shows, promotional events or outdoor sports and tailgating.

Nylon Molded Truss joints for improved durability

Manual crank for raising peak to maximum height

Push button metal lever for easy height adjusting

Full Wall shown with Full-Color Dye Sub Canopy Peak and Overhangs shown with Thermal Imprints

FL

AG

S &

EV

EN

TS

3333

Description Dimensions (W x H) Weight

Full Wall Enclosure 120" x 96" (x4) 12 lbs.

Half Wall 120" x 36" 3 lbs.

Full Wall 120” x 96" 6 lbs.

Description Dimensions (W x H)

Deluxe Frame Sail Sign Mount Use with 8' & 11" Sail Signs

Premium Frame Sail Sign Mount Use with 8' & 11" Sail Signs

CANOPY FULL WALL ENCLOSURE

Provide complete coverage for your canopy space to protect from the sun and wind. The walls are made from white, PVC-backed polyester and zip together at the corners to attach. This kit includes three full size sidewalls and a middle zipper sidewall provides access to the space when needed. Great for use at fairs and festivals by vendors to secure their area when not available.

CANOPY WALLS

Canopy accessories add value to your ShowStopper Event Tent investment by customizing them for different events. Made from weather-resistant white vinyl Full and Half Walls attach to the canopy legs with hook and loop straps securely sewn into the wall sides. These walls make great dividers and shield people and products from the sun.

EVENT TENT ACCESSORIES

Description WeightProduct

Information (W x H x D)

Tent Stake Kit 1 lbs. 4 Stakes/Rope/Case

Steel Ballast Weight 12 lbs. 7.25" x 1.25" x 8"

Plastic Water Weight 22 lbs. w/water 7" x 14" x 7"

Half Wall Bar - Deluxe 2 lbs. 56" to 118"W

Half Wall Bar - Premium 2 lbs. 36" to 120"W

Soft Nylon Case w/ Wheels 8 lbs. 10.5" x 63" x 10"

Hard Plastic Case w/Wheels 12 lbs. 15" x 75" x 20"

Half Wall on bottom

Full Wall

Full Wall Enclosure

Description Product Size (W x H)

Graphic Size(W x H)

Four Season Event Cooler 33.25" x 21.5" 68.375" x 27"

FOUR SEASON EVENT COOLER

For corporate events or parties the offer cool beverages while providing extra area for branding or advertising. For use indoors or outdoors it will keep 30 lbs. of ice cool for up to 48 hours. No tools required for assembly and the rotating wheels make it easy to move anywhere.

Simple drainage valve allows for easy access to empty cooler when finished

SAIL SIGN MOUNT FOR TENT FRAME

Fly a flag high and bring added attention to your event or promotion. Secure the mount to your Tent frame leg to hold a Sail Sign flag high above your tent top. Recommended for use with the 8' and 11' Sail Signs shown on page 30.

Hard Case Soft Case

Steel Ballast Weight Plastic Water WeightTent Stake Kit

Thermal Imprints shown on Canopy Peaks and Overhangs with 8' Tear Drop Sail Sign

Half Wall Stabilizing Bar- Clamps to tent frame to hang half walls

CU

STO

M I

MP

RIN

TIN

G

34

DIGITALLY PRINTED BANNERS

For complex graphics or photographic images to display on a banner, digital printing is the ideal choice. Utilizing the latest technologies to ensure crisp, vivid images printed every time.

DIGITALLY PRINTED FLAGS

Produce clean, sharp printing of even the most intricate designs on a custom-made flag. A graphic image or photo on a flag makes an impact!

Digitally Printed Flag

DYE SUBLIMATION BANNERS

When you want a high quality banner on a fabric material, the Dye Sublimation imprinting produces a beautiful look. Printed on polyester based materials, this is best used for full color graphics.

DIGITALLY PRINTED RIGID SIGNS

For those times when you need a rigid sign for a party, garage sale or other temporary event, a corrugated plastic sign is the most economical. Full color imprinting available on a variety of substrates based on the application and the environment.

Dye Sublimation Banners

Digitally Printed Banners

CU

STO

M I

MP

RIN

TIN

G

35

PRODUCT INSTRUCTION & SET-UP VIDEOS

We have recently launched a series of Product Videos created to ensure proper installation and set-up of some of our most popular products.

is to use many of our most popular products

SCREEN PRINTED BANNERS & FLAGS

Screen Printing is ideal for flags and banners with simplistic designs and when larger quantities are required.

APPLI UE FLAGS

Hand cut letters and shapes are expertly sewn onto Applique Flags to create a rich, raised appearance. Each flag is an original handcrafted creation that is ideal for small quantity needs.

resistant nylon

outdoors

Applique Flag

Screen Printed Banners

Screen Printed Flags

OVER 1 VIDEOS CURRENTLY AVAILABLE!

Watch for the video icon throughout this catalog to see what videos are currently

available!

Shown here is the installation of an

Shown here is the complete set-up of the Economy

Retractor Display

Table Throws Interior Displays

#CDC12

Date post:	11-Mar-2016
Category:	Documents
Upload:	paul-barden
View:	217 times
Download:	1 times

CreativePGM Display Catalog

Documents