CREMONE, SURFACE AND FLUSH BOLTS
8800-225 Large Mushroom
Knob, Small Rose
8802-225Large Colonial
Knob, Small Rose
8802-225Large Colonial
Knob, Large Rose
8801-250Large Oval
Knob, Large Rose
8800-175Small Mushroom
Knob, Small Rose 8801-250
Large Oval Knob,Small Rose
8801-262Small Oval Knob,
Small Rose
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
2700/842700/962700/120
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
Privacy/Locking Cremone Bolt
Privacy Cremone Bolt for 7’0 DoorPrivacy Cremone Bolt for 8’0 DoorPrivacy Cremone Bolt for 10’0 Door
Standard Distressed ETERNA
2702/842702/962702/120
Dummy Privacy Cremone Bolt
Dummy Privacy Cremone Bolt for 7’0 DoorDummy Privacy Cremone Bolt for 8’0 DoorDummy Privacy Cremone Bolt for 10’0 Door
Standard Distressed ETERNA
Trim Sold Separately
Trim Sold Separately
Supplied Standard Optional Accessories
2100-USUniversal Strike
9941-045Double Sided
Special Spindle9150
Rim Cylinder2100-AS
Angle Strike2700-BS
Box Strike
Additional Non-Suited Lever Options. Suited Levers also Available
Additional Non-Suited Knob Options. Suited Knobs also Available
1,835.912,056.532,497.53
1,982.912,221.052,697.33
2,203.242,467.842,997.04
872.821,148.431,699.68
742.19
942.641,240.321,835.67
890.631,171.881,734.38
2100-AS2700-BS9150
9931-0209941-0452700-06A
Cremone Bolt Accessories
Optional Angle StrikeBox StrikeRim Cylinder
Single Sided 2.0” SpindleDouble Sided 4.5” SpindleDouble Sided 6.0” Spindle for Thick Doors 3” Max Thickness
Standard Distressed ETERNA20.5658.8058.80
22.1563.5063.50
23.7270.5670.56
Mill Finish28.0072.8072.80
8820Traditional, Small Rose
8824Wave, Small Rose
8825Rat Tail, Small Rose
8828Leaf, Small Rose
8821Small Turned Lever, Small Rose
Also Available in a Large Lever 8821C8826
Curved, Small Rose
Rev. 5/20
R2
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Features:Von Morris Cremone Bolts feature forged, solid brass case and guides with an internal mechanism of brass and stainless steel. The Locking Cremone case is very narrow, less than 1.5", for use on narrow stiles of French doors and windows. Cremone Bolt locks from the exterior with a rim cylinder and inside with a turnpiece. Cremone case contains a cassette mechanism that can be handed simply by reversing the cassette. The Cremo-ne can also be easily changed from lever operation (90° rotation) to knob operation (180°) simply by relocating the spindle. Shoot Bolts are attached to the Cremone mecha-nism with machine screws. These machine screws are covered with interchangeable Frogs. Cremone Bolt design is very clean, featuring concealed Shoot Bolt guides. Various Frogs are available to allow you to suite the Cremone Bolt. Cremone Bolts can be used with any Von Morris Knob or Lever. Any appropriate Von Morris trim can be used on the outside. Knobs, levers and trim must be ordered separately.
Guides and Frogs:End Guides have a flat spring operating on the front of the bolt to prevent rattling. The length of the Guide and placement of the spring conceals any scratches on the bolt caused by the spring. This End Guide design allows the bolts to be installed on the door and then cut to length at the job site. Two Frogs are attached to the ends of the Cremone case with #8 x 1.0" screws and hide the attachment of the Shoot Bolts. One Frog is attached to the end of each End Guide.
Locking Cremone Case Size: Length from end of Frog to end of Frog: 10.04"Width: 1.463"Height to edge of case: 0.787"Height to face of knob/lever boss: 1.024"Spindle hub to turnpiece spacing: 2.250"Spindle hub to cylinder spacing: 2.467"
Spindle Height: Standard Spindle height is 42".
Standard Lengths: 7', 8' and 10'. Other sizes by special order. Bolts can be cut to size at job site.
Hub Rotation: Knob - 180° rotation. Lever - 90° rotation.
Throw: Knob Operation – 1.00" Lever Operation – 0.75"
Spindle: Cremones are supplied with a special spindle for double sided operation
Bolts: Bottom bolt: 0.625" wide x 40.01" Top bolt: 0.625" wide x 40.03" for a 7.0' Door Top bolt: 0.625" wide x 52.92" for a 8.0' Door Top bolt: 0.625" wide x 76.92" for a 10.0' Door Strikes: Cremone Bolts are supplied with Mortise and Universal strikes. Angle strikes and Box strikes are available at an additional cost.
Locking Privacy Cremone Bolt
2700 Locking Privacy Cremone Boltwith 8821 Turned Lever
Knobs/Levers/Turnpiece Sold Separately
Rev. 5/20
R3
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
2701/842701/962701/120
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Von Morris Customer Service for Up to Date Pricing.
Standard/Passage Cremone Bolt
Standard Cremone Bolt for 7’0 DoorStandard Cremone Bolt for 8’0 DoorStandard Cremone Bolt for 10’0 Door
Standard Distressed ETERNATrim Sold Separately
Supplied Standard Optional Accessories
2100-USUniversal Strike
9931-020Single Spindle
2100-ASAngle Strike
2700-BSBox Strike
2100-AS2700-BS9150
9931-0209941-0452700-06A
Cremone Bolt Accessories
Optional Angle StrikeBox StrikeRim Cylinder
Single Sided 2.0” SpindleDouble Sided 4.5” SpindleDouble Sided 6.0” Spindle for Thick Doors 3” Max Thickness
Standard Distressed ETERNA
698.25918.75
1,359.75
754.11992.25
1,468.53
837.901,102.501,631.70
20.5658.8058.80
22.1563.5063.50
23.7270.5670.56
Mill Finish28.0072.8072.80
8800-225 Large Mushroom
Knob, Small Rose
8802-225Large Colonial
Knob, Small Rose
8802-225Large Colonial
Knob, Large Rose
8801-250Large Oval
Knob, Large Rose
8800-175Small Mushroom
Knob, Small Rose 8801-250
Large Oval Knob,Small Rose
8801-262Small Oval Knob,
Small Rose
Additional Non-Suited Lever Options. Suited Levers also Available
Additional Non-Suited Knob Options. Suited Knobs also Available
8820Traditional, Small Rose
8824Wave, Small Rose
8825Rat Tail, Small Rose
8828Leaf, Small Rose
8821Small Turned Lever, Small Rose
Also Available in a Large Lever 8821C8826
Curved, Small Rose
Rev. 5/20
R4
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Features:Von Morris Cremone Bolts feature forged, solid brass case and guides with an internal mechanism of brass and stainless steel. The Locking Cremone case is very narrow, less than 1.5", for use on narrow stiles of French doors and windows. Cremone case contains a cassette mechanism that can be handed simply by reversing the cassette. The Cremo-ne can also be easily changed from lever operation (90° rotation) to knob operation (180°) simply by relocating the spindle. Shoot Bolts are attached to the Cremone mecha-nism with machine screws. These machine screws are covered with interchangeable Frogs. Cremone Bolt design is very clean, featuring concealed Shoot Bolt guides. Various Frogs are available to allow you to suite the Cremone Bolt. Cremone Bolts can be used with any Von Morris Knob or Lever. Any appropriate Von Morris trim can be used on the outside. Knobs, levers and trim must be ordered separately.
Guides and Frogs:End Guides have a flat spring operating on the front of the bolt to prevent rattling. The length of the Guide and placement of the spring conceals any scratches on the bolt caused by the spring. This End Guide design allows the bolts to be installed on the door and then cut to length at the job site. Two Frogs are attached to the ends of the Cremone case with #8 x 1.0" screws and hide the attachment of the Shoot Bolts. One Frog is attached to the end of each End Guide.
Standard Cremone Case Size: Length from end of Frog to end of Frog: 7.965”"Width: 1.463"Height to edge of case: 0.787"Height to face of knob/lever boss: 1.024"
Spindle Height: Standard Spindle height is 42".
Standard Lengths: 7', 8' and 10'. Other sizes by special order.Bolts can be cut to size at job site.
Hub Rotation: Knob - 180° rotation. Lever - 90° rotation.
Throw: Knob Operation – 1.00" Lever Operation – 0.75"
Spindle: Cremones are supplied with a 2” special Spindle for single sided operation
Bolts: Bottom bolt: 0.625" wide x 40.01"Top bolt: 0.625" wide x 40.03" for a 7.0' DoorTop bolt: 0.625" wide x 52.92" for a 8.0' DoorTop bolt: 0.625" wide x 76.92" for a 10.0' Door
Strikes: Cremone Bolts are supplied with Mortise and Universal strikes. Angle strikes and Box strikes are available at an additional cost.
Standard Cremone Bolt
2701 Standard Cremone Boltwith 8828 Leaf Lever
Knobs/Levers/Turnpiece Sold SeparatelyRev. 5/20
R5
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Supplied Standard Optional Accessories
2100-USUniversal Strike
2100-ASAngle Strike
2100-MSMortise Strike
2108211221182124
Solid Brass Traditional Knob and Guide Surface Bolt
8.0” Traditional Knob and Guide Surface Bolt12.0” Traditional Knob and Guide Surface Bolt18.0” Traditional Knob and Guide Surface Bolt24.0” Traditional Knob and Guide Surface Bolt
Standard Distressed ETERNA
2100-AS2100-US2100-MS
Surface Bolt Accessories
Optional Angle StrikeUniversal Strike for use with 21xx 22xx and 27xxMortise Strike for use with 21xx and 27xx
Standard Distressed ETERNA20.5615.4215.42
22.1516.6116.61
23.7317.8017.80
77.2888.60
105.57130.07
83.2395.42
113.68140.08
89.18102.24121.81150.09
2108/OS2112/OS2118/OS2124/OS
8.0” Traditional Knob and Guide Surface Bolt12.0” Traditional Knob and Guide Surface Bolt18.0” Traditional Knob and Guide Surface Bolt24.0” Traditional Knob and Guide Surface Bolt
Standard Distressed ETERNAOffset Solid Brass Traditional Knob and Guide Surface Bolt
88.87101.89121.40149.58
95.72109.75130.73161.10
102.57117.58140.08172.01
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
Rev. 5/20
R6
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Offset Solid Brass Traditional Knob and Guide Surface Bolt
2108/OS 8" 2 1 0.85 lbs2112/OS 12" 3 1 1.15 lbs2118/OS 18" 3 1 1.50 lbs2124/OS 24" 3 1 1.80 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
• Solid Brass Bolt with Forged Brass Knob and Guide. Bolt is held firmly against the back of the guide by coil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.625".• Diameter of Knob: 1.375".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
Solid Brass Traditional Knob and Guide Surface Bolt
2108 8" 2 1 0.85 lbs2112 12" 3 1 1.15 lbs2118 18" 3 1 1.50 lbs2124 24" 3 1 1.80 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
• Solid Brass Bolt with Forged Brass Knob and Guide. Bolt is held firmly against the back of the guide by coil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.625".• Diameter of Knob: 1.250".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
2108
2118
Rev. 5/20
R7
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH
Supplied Standard Optional Accessories
2100-USUniversal Strike
2100-ASAngle Strike
2100-MSMortise Strike
2100-AS2100-US2100-MS
Surface Bolt Accessories
Optional Angle StrikeUniversal Strike for use with 21xx 22xx and 27xxMortise Strike for use with 21xx and 27xx
Standard Distressed ETERNA20.5615.4215.42
22.1516.6116.61
23.7317.8017.80
2108CK/OS2112CK/OS2118CK/OS2124CK/OS
8.0” Offset Colonial Knob with Trad Guide Surface Bolt12.0” Offset Colonial Knob with Trad Guide Surface Bolt18.0” Offset Colonial Knob with Trad Guide Surface Bolt24.0” Offset Colonial Knob with Trad Guide Surface Bolt
Offset Colonial Knob with Traditional Guide Surface Bolt
106.24114.90134.41162.60
114.40123.74144.76175.72
122.57132.57155.09187.61
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
2108CK2112CK2118CK2124CK
Solid Brass Colonial Knob with Traditional Guide Surface Bolt
8.0” Colonial Knob with Traditional Guide Surface Bolt12.0” Colonial Knob with Traditional Guide Surface Bolt18.0” Colonial Knob with Traditional Guide Surface Bolt24.0” Colonial Knob with Traditional Guide Surface Bolt
Standard Distressed ETERNA92.3799.91
116.88141.39
99.48107.59125.87152.26
106.59115.29134.86163.14
Standard Distressed ETERNA
Rev. 5/20
R8
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Offset Solid Brass Colonial Knob with Traditional Guide Surface Bolt
2108CK/OS 8" 2 1 0.85 lbs2112CK/OS 12" 3 1 1.15 lbs2118CK/OS 18" 3 1 1.50 lbs2124CK/OS 24" 3 1 1.80 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
• Solid Brass Bolt with Forged Brass Knob and Guide. Bolt is held firmly against the back of the guide bycoil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.625".• Diameter of Knob: 1.375".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
Solid Brass Colonial Knob wtih Traditional Guide Surface Bolt
2108CK 8" 2 1 0.85 lbs2112CK 12" 3 1 1.15 lbs2118CK 18" 3 1 1.50 lbs2124CK 24" 3 1 1.80 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
• Solid Brass Bolt with Forged Brass Knob and Guide. Bolt is held firmly against the back of the guide bycoil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.625".• Diameter of Knob: 1.375".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
2108CK
2112CK
Rev. 5/20
R9
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Supplied Standard Optional Accessories
2100-USUniversal Strike
2100-ASAngle Strike
2100-MSMortise Strike
2100-AS2100-US2100-MS
Surface Bolt Accessories
Optional Angle StrikeUniversal Strike for use with 21xx 22xx and 27xxMortise Strike for use with 21xx and 27xx
Standard Distressed ETERNA20.5615.4215.42
22.1516.6116.61
23.7317.8017.80
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
2108C/OS2112C/OS2118C/OS2124C/OS
8.0” Offset Colonial Knob and Guide Surface Bolt12.0” Offset Colonial Knob and Guide Surface Bolt18.0” Offset Colonial Knob and Guide Surface Bolt24.0” Offset Colonial Knob and Guide Surface Bolt
Standard Distressed ETERNAOffset Solid Brass Colonial Knob and Guide Surface Bolt
132.24162.60182.10210.28
142.42175.10196.12226.46
152.59187.61210.12242.64
2108C2112C2118C2124C
Solid Brass Colonial Knob and Guide Surface Bolt
8.0” Colonial Knob and Guide Surface Bolt12.0” Colonial Knob and Guide Surface Bolt18.0” Colonial Knob and Guide Surface Bolt24.0” Colonial Knob and Guide Surface Bolt
Standard Distressed ETERNA114.99141.39158.34182.85
123.83152.26170.53196.92
132.69163.14182.71210.99
Rev. 5/20
R10
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTSSolid Brass Colonial Knob and Guide Surface Bolts
2108C
2112C
• Solid Brass Bolt with Forged Brass Knbob and Guide. Bolt is held firmly against the back of the guide by coil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.850".• Diameter of Knob: 1.375".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
2108C 8" 2 1 1.15 lbs2112C 12" 3 1 1.50 lbs2118C 18" 3 1 1.90 lbs2124C 24" 3 1 2.15 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
Offset Solid Brass Colonial Knob and Guide Surface Bolts
2108C/OS 8" 2 1 0.85 lbs2112C/OS 12" 3 1 1.15 lbs2118C/OS 18" 3 1 1.50 lbs2124C/OS 24" 3 1 1.80 lbs
Part Number
Length of Bolt
Number of Guides
Weight per Box
Packing per Box
• Solid Brass Bolt with Forged Brass Knob and Guide. Bolt is held firmly against the back of the guide by coil springs and detent balls to prevent scratching and rattling.• Size: Width of Bolt: 0.625" - Width of Guide: 1.625".• Diameter of Knob: 1.250".• One per box with Universal and Mortise Strikes and Screws. Angle Strike available for additional price.• Custom sizes and offsets available on special order. Call for prices.
Rev. 5/20
R11
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
2202
Solid Brass Extension Flush Bolt
Extension Flush BoltStandard Distressed ETERNA
2202-GD2202-MS
2218222422362248
Flush Bolt Accessories
Guide Plate for 2002Mortise Strike for 2202 and 2203
18” Extension Rod for use wtih 220224” Extension Rod for use wtih 220236” Extension Rod for use wtih 220248” Extension Rod for use wtih 2202
Standard Distressed ETERNA
CREMONE, SURFACE AND FLUSH BOLTS
2203
High Security Residential Flush Bolt
High Security Residential Extension Flush BoltStandard Distressed ETERNA
Extension Rods
15.4217.14
16.6118.46
17.8019.78
58.24 63.84 72.80
58.24 63.84 72.80
All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.
Mill Finish16.80 NET16.80 NET16.80 NET22.40 NET
Rev. 5/20
R12
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH Solid Brass Extension Flush Bolt
High Security Residential Flush Bolt
2202Extension Flush Bolt
2203High Security
Residential Flush Bolt
• Forged Extension Bolts have a 0.75" throw. Lever engages Bolt at approxi-mately 45 degrees for greater leverage and easier operation. Lever snaps home in both closed and open positions.
• BHMA Designation: L04081• Government type: 1049
Dimensions: Length: 6.75" Width: 1.00" Bolt: 0.50" Throw: 0.75"• Packed two per box in individual poly bags with fasteners and 12" rods standard.• 1.76 lbs. per box.• Other length Rods available from stock: 18/24/36/48 inch. See price list for additional cost.
• High Security Residential Flush Bolt feature Solid Forged Brass construction. Lever engages Bolt at approximately 45 degrees for greater leverage and easier operation. Lever snaps home in both closed and open positions. The Lever design offers the security of an Extension Flush Bolt with the smaller size and ease of installation of a Residential Fush Bolt.
Dimensions: Length: 6.00" Width: 0.75" Bolt: 0.50" Throw: 0.75"
• Packed 4 per box in individual poly bags with fasteners.• 2.48 lbs. per box.
Rev. 5/20
R13
VON MORRIS is a brand of ERIC MORRIS & COMPANYPhone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com
CREMONE, SURFACE AND FLUSH BOLTS
Rev. 5/20
R1 Bolts 2020R2 Bolts 2020R3 Bolts 2020R4 Bolts 2020R5 Bolts 2020R6 Bolts 2020R7 Bolts 2020R8 Bolts 2020R9 Bolts 2020R10 Bolts 2020R11 Bolts 2020R12 Bolts 2020R13 Bolts 2020R14 Bolts 2020