Cross-Connect and Interconnect Blocks and...

4.14.1

Copper Central Office Products

3Cross-Connect and InterconnectBlocks and Modules

Connection Modules STG 2000 4.2

Connection Block BSTG 4.12

High Density Terminal Block BRCP 4.13

Connection Modules RCP 2000 4.15

Cat. 6 Cross-Connects RCP 2000 4.19

v. 072507

Many of the products in this catalog are certified as compliant with RoHSstandards. For a complete and updated listing of specific RoHS-compliantproducts, refer to the 3M Communications Technology website atwww.3M.com/ROHS.

4.2 www.3MTelecommunications.com 800-426-8688

3M™ Connection Modules STG 2000

This module offers Cat. 5 transmission performance as a standard. As a result, it is fullycompatible with a variety of applications (xDSL, Pairgain™, etc.).

Termination is easy, and cable jumpers can be managed from the rear or from the side.

Reliability and Performance

3M’s straight IDC technology can offer outstanding performance:

• Multiple retermination with all kinds of conductor gauges in the 0,8 to 0,4 mm (20 to 26 AWG) range

• Improved wire retention (in all directions)• Gas-tight connection area – corrosion-proof• Tin-lead plating on contacts avoids corrosion• Transmission performances meet Cat. 5 (100 MHz)• 2 wires can be accommodated in the same slot• Very compact design• Specific contacts for stranded wires upon request

4.3

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

Application in Network

STG 2000 modules are suitable for public telephony (MDF, cross-connectioncabinets, building distribution) as well as for private telephony and high data rates

transmission. They are also suitable for high-density installation (4500 pair single-sidedcross connection frames, 1600 pairs on 2.6 m (8.53 ft.) vertical MDF, containerized

exchanges, etc.).HIGHLIGHTS

Cat. 5 as a standard

Very compact size 16 mm (0.059 in) pitch

0,4 to 0,8 mm (20 to 26 AWG) wires

Optional IDC’s for stranded wires

Specific module with rear cable termination

Multiple reterminations

Comprehensive range of protection circuits and accessories

SPECIFICATIONS

INSULATION DISPLACEMENT CONTACTS (IDC)

FUNCTION AND ACCESSORIES STG U STG C STG O

Type of contact

Continuity (normally closed circuit) • •

Normally opened circuit •

Parallel test • • •

Serial test • • •

T-connection (1) (1) (1)

Disconnection •

Protection magazine (2) (2) (2)

Single-pair protection plugs (3) (3)

Multi-pair parallel test • •

Fuse protection •

Transmission performance Cat. 5 Cat. 5 Cat. 5

(1) T-connection: two wires in the same slot(2) Modules with grounding contacts(3) Connection modules with grounding grid

STG U

STG C

STG O

PRODUCT ABBREVIATION INSTRUCTIONS

Example: STG C2 10 P

STG type of module C type of circuit (C, U, O)2 IDC10 10 pairs (8 for 8 pairs)P contacts for automatic grounding (for protection magazine)PU grounding grid for single pair protection plugs

3M™ CONNECTION MODULES STG 2000


3M™ PROTECTION SOLUTIONS STG 2000

Protection solutions for STG are composed of multi-pair protection magazines as well as a complete range of single-pair protection plugs.

Protection Magazine

• Front facing magazines suitable for all IDC STG connection modules and BSTG modular blocks, with the relevant protection facilities.

• Automatic grounding through the backmount frame/5 kA drain current capacity.

• Magazine with earth cord for upgrading standard connection modules or blocks with protection.

Single-Pair Protection Plugs

• This range of single-pair protection modules is designed to increase flexibility in network management. Protection can be removed separately only on faulty lines.

• Wide range of protection circuits from standard overvoltage protection, overvoltage and current protection and fast 5-pole protection.

• Disconnection access on the protection plugs allows the use of all STG disconnection and test accessories without removing protection.

Single-pair protection modules are suitable for the standard 16 mm (0.059 in.) pitch. One circuit single-pair protection module equals one color.

HIGHLIGHTSComprehensive range of protection

Fast 5-point protection

Compact design

Automatic grounding

4.5

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

BLOCKS

Connection Modules

Light gray casing on light gray base.

PRODUCT NUMBER: C252806A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 U2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19360

PRODUCT NUMBER: C252824A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 U2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12579

PRODUCT NUMBER: C252809A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19354

PRODUCT NUMBER: C252827A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19357

Disconnection Modules

White casing on light gray base.

PRODUCT NUMBER: C252800A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 C2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-01038

PRODUCT NUMBER: C252818A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12581

PRODUCT NUMBER: C252803A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19359

PRODUCT NUMBER: C252821A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19356

Switching Modules

Light blue casing on light gray base.

PRODUCT NUMBER: C252812A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 O2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19353

PRODUCT NUMBER: C252830A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12583

3M™ CONNECTION MODULES STG 2000 WITHOUT PROTECTION FACILITY


PROTECTORSProtection cartridge to use: SOR CH with 0,75 m (2.46 ft) grounding cord.

PRODUCT NUMBER: C233727CDESCRIPTION: STG-SOR CH8 PROT CART W/EARTH CORD, 8-PR EMPTY MIN. ORDER: 20 UPC: 051115-19375

PRODUCT NUMBER: C233728BDESCRIPTION: STG-SOR CH10 PROT CART W/EARTH CORD, 10-PR EMPTY MIN. ORDER: 20 UPC: 051115-19376

PRODUCT NUMBER: C231039ADESCRIPTION: STG-250V 3-POLE ARRESTOR W/FAIL SAFE MIN. ORDER: 500 UPC: 001895-78443


PRODUCT NUMBER: C222053ADESCRIPTION: STG-3-POLE INSERTION/EXTRACTION TOOL MIN. ORDER: 10 UPC: 001895-79556

3M™ CONNECTION MODULES STG 2000 WITHOUT PROTECTION FACILITY

4.7

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

BLOCKS

Connection Modules

Light gray casing on light gray base.

PRODUCT NUMBER: C252807A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 U2 8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-01039

PRODUCT NUMBER: C252825A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 U2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12585

PRODUCT NUMBER: C252810A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19355

PRODUCT NUMBER: C252828A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19320

Disconnection Modules

White casing on light gray base.

PRODUCT NUMBER: C252801A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 C2 8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-18032

PRODUCT NUMBER: C252819A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12587

PRODUCT NUMBER: C252804A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-18033

PRODUCT NUMBER: C252822A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-16061

Switching Modules

Light blue casing on light gray base.

PRODUCT NUMBER: C252831A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12589

3M™ CONNECTION MODULES STG 2000 WITH MULTI-PAIR PROTECTION FACILITY


PROTECTORSProtection cartridge to use: SOR CH.PRODUCT NUMBER: C233725BDESCRIPTION: STG-SOR CH8 PROT CART-8-PR EMPTY MIN. ORDER: 20 UPC: 001895-78269

PRODUCT NUMBER: C233726BDESCRIPTION: STG-SOR CH10 PROT CART-10-PR EMPTY MIN. ORDER: 20 UPC: 051115-16062

PRODUCT NUMBER: C233736BDESCRIPTION: STG-SOR CH8 PROT CART-8-PR W/250V 3-POLE GDT/FS MIN. ORDER: 400 UPC: 051115-19377






PRODUCT NUMBER: C222053ADESCRIPTION: 3-POLE ARRESTER INSERTION/EXTRACTION TOOL MIN. ORDER: 10 UPC: 001895-79556

3M™ CONNECTION MODULES STG 2000 WITH MULTI-PAIR PROTECTION FACILITY

4.9

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

BLOCKSDisconnection Module

White casing on light gray base.PRODUCT NUMBER: C252802A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97)

DESCRIPTION: STG2 C2 8 PU W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-00916

PRODUCT NUMBER: C252820A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10 PU W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12593

Switching ModulesLight blue casing on light gray base.

PRODUCT NUMBER: C252814A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 O2 8 PU W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20

PRODUCT NUMBER: C252832A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10 PU W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12595

PROTECTORSProtection plug to use: SOR PU with test and disconnection facility.

PRODUCT NUMBER: C233796ADESCRIPTION: SOR PU 1C SINGLE PAIR PROTECTION MODULE W/250V GDT (GREY) MIN. ORDER: 1000

UPC: 051115-12534

PRODUCT NUMBER: C233797ADESCRIPTION: SOR PU 2C SINGLE PAIR PROTECTION MODULE W/250V GDT (ORANGE) MIN. ORDER: 1000

UPC: 051115-19361

PRODUCT NUMBER: C233798ADESCRIPTION: SOR PU 3C SINGLE PAIR PROTECTION MODULE W/250V GDT (YELLOW) MIN. ORDER: 1000

UPC: 051115-19379

3M™ CONNECTION MODULES STG 2000 WITH SINGLE-PAIR PROTECTION FACILITY

cableside

jumperside


STG 2000 PROTECTOR VS STG 2000 MODULE SELECTOR

250V GDT 8 PAIR 10 PAIR STG MODULE COUNT COUNT TYPE

T80A250XFP 250V GDT with fail-safe

C231039A0000 FQC231039A8

empty SOR CH10 w/ earth cord

C233728B0000FQ100004552

empty SOR CH8 w/ earth cord

C233727C0000FQ100004545

SOR CH10 emptyC233726B0000FQ100004537

SOR CH10 w/250V GDTC233740B0000FQ100004578

SOR CH8 emptyC233725B0000FQC233725B1

SOR CH8 w/250V GDTC233736B0000FQ100004560

STG2 U2-xP

STG2 C2-xP

STG2 O2-xP

STG2 C2-xPU

STG2 O2-xPU

STG2 U2-x

STG2 C2-x

STG2 O2-x

STG2 U2-x

STG2 C2-x

STG2 O2-x

C233796A SOR PU1C 250V FQ100004610

C233797A SOR PU2C 250V FQ100002903

C233798A SOR PU3C 250V FQ100004628

Application 1

No Protection

Application 2

Single-Pair Protection

Application 3

Multi-Pair Protection

SOR PU single-pair protection modules

SOR CH multi-pair protection magazine

SOR CH multi-pair protection magazine with ground cord


4.11

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

STG 2000 MODULE BACK MOUNT FRAME (BMF) APPLICATION SELECTOR

8 PAIR COUNT 10 PAIR COUNT

STG MODULE TYPE STG BMF STG AND LSA+/QSA BMFS STG BMF STG AND LSA+/QSA BMFS

STG2 U2-K10C252827A0000FQ100004834

STG2 C2-K10C252821A0000FQ100004784

—

STG2 U2-10C252824A0000FQ100004800

STG2 C2-10C252818A0000FQ100004750

STG2 O2-10C252830A0000FQ100004859

STG2 U2-K8C252809A0000FQ100004735

STG2 C2-K8C252803A0000FQ100004693

—

STG2 U2-8C252806A0000FQ100004719

STG2 C2-8C252800A0000FQ100004669

STG2 O2-8C252812A0000FQ100004982

STG2 U2-x

STG2 C2-x

STG2 O2-x

—

—

—

—

STG2 C2-10PUC252820A0000FQ100004776

STG2 O2-10PUC252832A0000FQ100004875

—

—

—

—

STG2 C2-8PUC252802A0000FQ100004685

STG2 O2-8PUC252814A0000FQ100005005

STG2 U2-xPU

STG2 C2-xPU

STG2 O2-xPU

STG2 U2-K10PC252828A0000FQC252828A9

STG2 C2-K10PC252822A0000FQ100004792

—

STG2 U2-10PC252825A0000FQ100004818

STG2 C2-10PC252819A0000FQ100004768

STG2 O2-10PC252831A0000FQ100004867

STG2 U2-K8PC252810A0000FQ100004743

STG2 C2-K8PC252804A0000FQ100004701

—

STG2 U2-8PC252807A0000FQ100004727

STG2 C2-8PC252801A0000FQ100004677

—

STG2 U2-xP

STG2 C2-xP

STG2 O2-xP



3M™ CONNECTION BLOCK BSTG

The BSTG block is a modular solution block for MDF applications. These blocks are suitable for both line side and exchange side in the main distribution frame.

The 16 mm (0.63 in.) pitch between STG connection modulescontributes to the compact design of the BSTG block. For instance,1600 pairs can be installed on a 2.6 m (8.5 ft.) vertical. Equipment cable is routed inside the backmount frame.

The blocks are equipped with STG range of multipurpose connectionmodules with the following facilities: connection/disconnection, testfacility, IDC modules with insertion tool, and full range of single ormultipair protection plugs.

HIGHLIGHTSCat. 5 transmission performance

Very compact 16 mm (0.63 in.) pitch

20 to 26 AWG wire

Multiple reterminations

High density

Side or rear cable access

ADVANTAGESBSTG blocks offer all of the advantages of the latest range of STG modules:

Cat. 5 transmission performance

Very high connection density

Fast cabling

Completely protected IDC contacts

Integrated wire retention

A wide range of possible configurations of the blocks is available

Blocks with or without protection facility

Different labeling configurations

Disconnection or connection contacts available

Optional contacts for stranded wires (Please consult 3M)

BSTG Block

PRODUCT NUMBER: C223090B DESCRIPTION: BSTG U2 10 100,CAT 5 DIMENSIONS H X W X D MM (IN.): 176 X 146 X 87 (6.93 X 5.75 X 3.43) MIN. ORDER: 1 UPC: 051115-19369

PRODUCT NUMBER: C223111B DESCRIPTION: BSTG C2 10 100, CAT 5 FOR SOR CH PROTECTION DIMENSIONS H X W X D MM (IN.): 176 X 146 X 87 (6.93 X 5.75 X 3.43) MIN. ORDER: 1 UPC: 051115-17944

Each block is equipped with 1 label holder, 10 STG connection modules and 1 backmount frame.

W

H

D

4.13

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

3M™ HIGH DENSITY TERMINAL BLOCK BRCPFOR DSLAM INTERCONNECTION

The BRCP high density terminal block is the latest generation of MDFterminal blocks developed by 3M, specifically designed for xDSL

deployment in the Central Office for DSLAMs interconnection with theexisting Main Distribution Frame (MDF) as well as for DSLAM

interconnection in remote street cabinets. The innovative product designof the BRCP HD block provides superior features enabling both the

DSLAM vendor – with its installation contractors – and the xDSL serviceprovider rapid installation and superior density, matching the

requirements of current mass xDSL lines deployment.

Optimizing the space at the MDF in the Central Office

Very compact, the BRCP HD block requires much less space on thehorizontal side of the MDF frame, making it also very adapted to confined

spaces of remote applications such as shelters or technical rooms inresidential or corporate buildings. Thanks to its high density, this product

is also very adapted for remote DSL deployment in street cabinets.

Designed for xDSL deployment

The BRCP HD block is modular by design (16 pair modularity) available invarious pair counts enabling perfect match with 8 pair bundles of most

DSLAM cable configurations in the market.

Swiveling double side – front and rear – design provides a cleardemarcation of two termination areas, one at the rear for the DSLAM

vendor installation team (direct termination of DSLAM cables), the other atthe front for the xDSL service provider team to jumper its DSL subscribers.

FEATURES BENEFITS

Rear and front facing direct IDC or wire-wrap contacts on front side Direct IDC can reduce installation costs versus costly connectorized blocks(with or without stub cables)

Separated termination areas for DSLAM round trip cables (POTS Adapted to service providers using wire wrap connectionand LINE, at the rear) and subscriber jumpers (at the front) technique (no specific need for training)

Different terminal block pair counts available ranging from 144, 192 to 256 pairs Can reduce installation mistakes such as wrong contact assignment

High density of individual 16 pair modules Provides a physical/separation of craft demarcation between two different service teams

Wire guide channels Enables perfect match with 8 pair bundles of most DSLAM cable configurations in the market

Label holders (block, individual modules, individual pairs or group of pairs) Can reduce installation costs in avoiding costly and time consuming cable splits

Cable retention device Can save MDF space in comparison with common terminal blocksin the market

Easy attachment to metallic MDF frames Adapted for both MDF, co-location DF and cabinet applications

No disconnection point available but testing capabilities Provides professional and efficient wiring management


SPECIFICATIONSApplication

1 block configurationEach half of the block is dedicated to one type of signalPOTS + DATA

2 blocks configurationEach block is dedicated to one type of signalPOTS + DATAPOTS

Electrical performance Dimensions

Attenuation in the range 3 to 30 MHz: <0.1 dB Length: 144 pairs=135 mm (5.31 in.)Return loss in the range 3 to 30 MHz: <-35 dB 192 pairs=180 mm (7.09 in.)Near end cross talk to 30 MHz: <45 dB 256 pairs=240 mm (9.45 in.)

Width: 130 mm (5.12 in.)Depth: 130 mm (5.12 in.)

ORDERING INFORMATIONPRODUCT NUMBER DESCRIPTION

BRCP-HD 256 I BRCP high density terminal block 256 pairs, IDC

BRCP-HD 256 W BRCP high density terminal block 256 pairs, WW





For ordering information, please contact your local 3M representative.

3M™ HIGH DENSITY TERMINAL BLOCK BCRP

4.15

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

3M™ CONNECTION MODULES RCP 2000

For the high requirements in the efficientcommunication network.

In a cabling systems, connection by modules generallyoffers greater flexibility at the patching level. Modules

also continue to be the only solution truly adapted to thecontrol of large-scale systems.

The RCP module family consists of both shielded andtechnical modules designed for high data rate applications.

• Technical modules enable fast installation of interfaces between dissimilar cables (for example a single cable with an RJ45 modular jack).

• Modules feature removable electronic boards for a complete solution. The boards can be replaced without removal of the connection module.

• The shielded RCP 2000 modules provide shielding from one end of the connection chain to the other for control of EMI.

• Label holders and color codes facilitate cable management.

• Very easy implementation, permitting direct y-shaped installation of jumpering wires in rear cabling version.

HIGHLIGHTSFast cabling with potential time savings

Net improvement in transmission performance above 100 MHz

Different solutions for numerous interfaces

Twisted pair on D-Sub, coax, RJ45

Line and error monitoring

World-wide IDC technique

Compact design

Cat. 5


Requires shielded cords 8 pair disconnection module.

BluePRODUCT NUMBER: P45920DH DESCRIPTION: RCP-SHIELDED CAT 5 BLUE MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19333

YellowPRODUCT NUMBER: P45840DH DESCRIPTION: RCP-SHIELDED CAT 5 YELLOW MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19328

GreenPRODUCT NUMBER: P45839DH DESCRIPTION: RCP-SHIELDED CAT 5 GREEN MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19325

RedPRODUCT NUMBER: P45809DH DESCRIPTION: RCP-SHIELDED CAT 5 RED MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 001895-79387


Shielded Rear-Cables Modules with Metal Cover

• Protects against conducted and radiated electromagnetic interferences.

• Single-wire and multi-wire cables can be connected to either theupper or lower contacts. Equipped with a bonding comb, a bondingstrip, a channeled wire guide with the lower half metallized and ametal cover on the upper half.

Metal cover

Protected

CAD contact

Grounding bar

Side label holder

Metallized channeled wire guide

Latchable cord

with addressing

and shielding option

Dual attachment

• to HPUL type rail

• to Europe E8 type rail

Upper surface marking

4.17

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s


Shielded Rear-Cables Modules

• Single-wire and multi-wire cables can be connected to either the upper or lower contacts.

• Equipped with a bonding comb, a bonding strip, a channeled wire guide with the lower part.

Requires shielded cords 8 pair disconnection module.

BluePRODUCT NUMBER: P45920DF DESCRIPTION: RCP-SHIELDED CAT 5 BLUE MODULE-REAR MIN. ORDER: 80

UPC: 051115-19332

YellowPRODUCT NUMBER: P45840DF DESCRIPTION: RCP-SHIELDED CAT 5 YELLOW MODULE-REAR MIN. ORDER: 80

UPC: 051115-19327

GreenPRODUCT NUMBER: P45839DF DESCRIPTION: RCP-SHIELDED CAT 5 GREEN MODULE-REAR MIN. ORDER: 80

UPC: 051115-19324

RedPRODUCT NUMBER: P45809DF DESCRIPTION: RCP-SHIELDED CAT 5 RED MODULE-REAR MIN. ORDER: 80

UPC: 051115-19322

SUB D

• Interface ID connector, patching with plug or cord/connector.

• Supplied with 10 contacts crimped to wires disconnect IDC, color yellow.

PRODUCT NUMBER: P45632AA DESCRIPTION: RCPT SUB D9 MALE MIN. ORDER: 1 UPC: 051115-19389

PRODUCT NUMBER: P45633AA DESCRIPTION: RCPT SUB D9 FEMALE MIN. ORDER: 1 UPC: 051115-19390







9-Pin Modular Jack Connector ISO 8877

With automatic shielding continuity on the profile, providing an interfacebetween the active equipment that has an RJ45 and the distributor frame.

PRODUCT NUMBER: P45363AA DESCRIPTION: RCPT 2-RJ45-BSC CABLING CODE MIN. ORDER: 1 UPC: 474491-00029

PRODUCT NUMBER: P45362A5 DESCRIPTION: RCPT 4-RJ45 ETHERNET 100 BASE TX-CAT 5 MIN. ORDER: 1 UPC: 474491-00025

Quadruple Baluns

Permit the connection of pairs to coax RG 62 AU fo IBM Type 3278 terminals.

PRODUCT NUMBER: P45400AA DESCRIPTION: PCPT 4-COAX RG62 BALUNS – YELLOW MIN. ORDER: 1 UPC: 051115-19391

4.19

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

3M™ CAT. 6 CROSS-CONNECTS RCP 2000

3M offers a complete punch down system for voice and data cross-connect applications.

• The “next generation” of cross-connect and the latest 3M innovation in a broad line of solutions for high speed data networks.

• Uses a simple modular approach with a few basic components such as 8-pairs cross-connect modules, back-mount frames and management accessories.

• Outstanding connecting block performance. Its near-end crosstalk (NEXT) performance has in general about 5dB headroom when used in a Cat. 6 permanent link.

• Can be used as cross-connect in a standard phone system today, and will support VoIP applications.

FEATURES BENEFITS

Innovative design – embedded IDC contacts Non-protruding contacts for improved protection and a long life cycle. Can reduce crosstalk and attenuation for Cat. 6 applications. Can terminate 22-24 AWG (0,4mm-0,8mm) solid or stranded conductors with a maximum overall diameter of AWG 26 to AWG 22

Innovative design – individual pairs are isolated via a unique Improves NEXT on Cat. 6 applications with a typical headroom of 7dB. shielded crosstalk-barrier technology Provides outstanding performance in the same footprint as standard

cross-connect RCP 2000

Simple installation – by using the same installation techniques as Utilizes existing design and installation techniques of our RCP 2000. This our standard cross-connect RCP 2000 system mounts in the same footprint as our standard cross-connects

RCP 2000. It enables the use of the same back-mount frames. Provides highly repeatable results

Proven installation techniques Rear cabling cross-connect saves up to 20% of installation time. Significant transmission improvement beyond 250 MHz because rear cabling provides the pairs remain twisted right up to the IDC contacts

Standard cross-connect back-mount frame Quick and easy installation. Installation on our standard cross-connect RCP 2000metal back-mount frame such as BCCE, RIBE, CIPU, CIPE. Available in 2x18,2x28, 2x41, 2x65, 2x90, 2x124 ways with 8-pair cross-connect strips

Standard footprint – as our standard cross-connect RCP 2000 Exceeds Cat. 6 requirements in the same footprint as standardcross-connect RCP 2000

Standard labeling The new cross-connect RCP Cat. 6 uses the same labels and accessories as our standard cross-connect RCP 2000. Numbered from 1 to 8. A wide variety of label holders offers a freedom of choice for labeling. Different colors of identifiers are available

Shielded version for EMI/RFI immunity Shielded cross-connect RCP Cat. 6 have a metallic cover and a metallicwire guide to provide EMI/RFI immunity. Shielded cross-connect RCP Cat. 6 provides EMI/RFI compatibility for harsh environments such as in industrial sites

360° screen contact on an earthing bar (dividing by 4 the amplitude Very good protection of cables against radiated interference of up to 150MHzof interference conducted to the screen)

Performance exceeds Cat. 6 component requirements even This allows for patch-by-exception Cat. 6 standardswhen jumpers are used

Cat. 6 disconnection modules for termination of two 4-pair cables Ideal for use in horizontal cable distribution


SPECIFICATIONS

3M™ CAT. 6 CROSS-CONNECTS RCP 2000

Electrical performance meets Cat. 6 TIA/EIA-568-B.2-1 and ISO/IEC 11801 ed.2 standards.

Electrical characteristics: Environmental and mechanical characteristics:

Lead-through resistance: less than 20 mΩ Insertion life minimum: 750 cycles.

Insulation resistance under 500V: greater than 100 MΩ Storage temperature: -40°c to +70°c.

Dielectric strength: greater than 4000V Operating temperature: -10°c to +60°c.

NEXT: 5dB Humidity max: 93% (non condensing)

NEXT in a consolidation point: 3dB Plastics components: polycarbonate, V-0 rated according to UL94.

RL: 3.5dB Contact material : tinned (minimum 5µm) coated bronze

ORDERING INFORMATION

CAT. 6 CROSS-CONNECTS RCP 2000

PRODUCT NUMBER DESCRIPTION MIN. ORDER UPC 474491-

RCP - Cabling Modules for solid wires (rear cabling)

P46920DF Disconnection module, Cat. 6, 8P, blue, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01370

P46840DF Disconnection module, Cat. 6, 8P, yellow, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01364

P46839DF Disconnection module, Cat. 6, 8P, green, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01356

P46809DF Disconnection module, Cat. 6, 8P, red, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01352

P46734DF Disconnection module, Cat. 6, 8P, ivory, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01342

RCP - Cabling Modules for solid wires (side cabling)

P46920CE Disconnection module, Cat. 6, 8P, blue, with 2 wire guide channels (side cabling) 80 01366

P46840CE Disconnection module, Cat. 6, 8P, yellow, with 2 wire guide channels (side cabling) 80 01360

P46839QE Disconnection module, Cat. 6, 8P, green, with 2 wire guide channels (side cabling) 80 01358

P46809CE Disconnection module, Cat. 6, 8P, red, with 2 wire guide channel (side cabling) 80 01344

P46734CE Disconnection module, Cat. 6, 8P, ivory, with 2 wire guide channels (side cabling) 80 01338

RCP - Cabling Modules for multi-stranded wires (rear cabling)

P46920DA Disconnection module, Cat. 6, 8P, blue, with 1 wire guide channel (rear cabling) 80 01368

P46840DA Disconnection module, Cat. 6, 8P, yellow, with 1 wire guide channel (rear cabling) 80 01362

P46839DA Disconnection module, Cat. 6, 8P, green, with 1 wire guide channel (rear cabling) 80 01354

P46809DA Disconnection module, Cat. 6, 8P, red, with 1 wire guide channel (rear cabling) 80 01350

P46734DA Disconnection module, Cat. 6, 8 P, ivory, with 1 wire guide channel (rear cabling) 80 01340

4.21

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s

3M™ TEST ACCESSORIES STG/BSTG 2000

PRODUCT NUMBER/PACKAGING INFO

C222909AMIN. ORDER: 10 UPC: 051115-12539

C242628AMIN. ORDER: 50 UPC: 051115-12540

C222048BMIN. ORDER: 5 UPC: 051115-12541

C222014BMIN. ORDER: 5 UPC: 051115-12542

C222059AMIN. ORDER: 20 UPC: 051115-12544

C222024BMIN. ORDER: 5 UPC: 051115-19364

C222025BMIN. ORDER: 5 UPC: 051115-19365

C242612AMIN. ORDER: 50 UPC: 051115-19380

DESCRIPTION

Disconnection PlugsSTG-SOR FC disconnection plug-LOT/100-red.

Serial Display Plug, 1 per Network LineRCP-serial display plug/1 network line.

PCB Type Test CordSTG-2-wire parallel test cord-3 m (9.843 ft.) with banana plugs.

PCB Type Test CordSTG-4-wire serial test cord-3 m (9.843 ft.) with banana plugs.

Multiple Parallel Test PlugSTG-SOR TM10-parallel test plug-10-PR.

PCB Type Patch CordSTG-4-wire patch cord-3 m (9.843 ft.).

PCB Type Patch CordSTG-2-wire patch cord-3 m (9.843 ft.).

PCB Type Patch CordSTG-2-wire cord single-sided PCB-2 m (6.562 ft.).




C242611AMIN. ORDER: 5 UPC: 051115-19397

MPA025DBMIN. ORDER: 20 UPC: 051115-12549

MPA025EBMIN. ORDER: 20 UPC: 051115-12550

MPA0781AMIN. ORDER: 10 UPC: 051115-12551

C222903AMIN. ORDER: 10 UPC: 051115-18051

C222918AMIN. ORDER: 10 UPC: 051115-19400

C220673BMIN. ORDER: 20 UPC: 051115-18050

C220674BMIN. ORDER: 20 UPC: 051115-16064

DESCRIPTION

PCB Type Patch CordSTG-2-wire cord single-sided PCB-1 m (3.281 ft.).

Test Cord with PlugsSTG-4-wire serial cord with terminals 1.5 m (4.921 ft.).

Test Cord with PlugsSTG-4-wire cord with terminals 1.5 m (4.921 ft.).

Parallel Test Plug for RJ 11 ConnectorSTG-parallel test plug for RJ 11 connector.

Label-HoldersSTG-side label holder with blank tape-LOT/100.

Label-HoldersSTG-lateral label holder with marked stickers-LOT/100.

Label-HolderSTG-8-PR label holder. To be clipped onto backmountframe.

Label-HolderSTG-10-PR label holder. To be clipped onto backmountframe.

4.23

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks

and M

odule

s



C222950AMIN. ORDER: 1 UPC: 051115-18249

C222951AMIN. ORDER: 1 UPC: 051115-19368

M004725AMIN. ORDER: 20 UPC: 051115-12560

C222920AMIN. ORDER: 10 UPC: 051115-18037

C222921AMIN. ORDER: 10 UPC: 051115-18038

C222922AMIN. ORDER: 10 UPC: 051115-18039

C222923AMIN. ORDER: 10 UPC: 051115-18040

C222924AMIN. ORDER: 10 UPC: 051115-18041

DESCRIPTION

Swivelling Label-Holders (not compatible with patch cords and wire-wrap modules)STG-8-PR hinged label holder-LOT/10.

Swivelling Label-Holders (not compatible with patch cords and wire-wrap modules)STG-10-PR hinged label holder-LOT/10.

CKD Test PlugSTG-serial test plug kit 4 contacts.

Marking Accessory, BlackSTG-black marking cap-LOT/100.

Marking Accessory, GraySTG-gray marking cap-LOT/100.

Marking Accessory, RedSTG-red marking cap-LOT/100.

Marking Accessory, YellowSTG-yellow marking cap-LOT/100.

Marking Accessory, BlueSTG-blue marking cap-LOT/100.




C222925AMIN. ORDER: 10 UPC: 051115-18042

C222917AMIN. ORDER: 10 UPC: 051115-19367

C234030AMIN. ORDER: 10 UPC: 051115-17945

DESCRIPTION

Marking Accessory, GreenSTG-green marking cap-LOT/100.

Marking AccessorySTG-side numbered marking cap-LOT/100.

Multipurpose Insertion ToolSTG-SOR OC insertion tool-3MIDC. Inserts and cuts the wire in a single operation. For use with 0,4-0,8 mm (20-26 AWG) diameters. Extractor tool included.

3M™ ACCESSORIES RCP 2000


P44223AAMIN. ORDER: 10 UPC: 051115-18048

P44506AAMIN. ORDER: 1 UPC: 001895-79451

DESCRIPTION

1-Way Label Holder - 8 PairRCP-8-pair 1-way label holder-LOT/100. Attached directly to the mounting profile. Color light gray.

For RCP only.

Rotating Label Holder - 8 PairRCP-8-pair hinged label holder-LOT/10. Attached to themodules it prevents the attachment of patching wires. Color light gray.

For RCP only.

4.25

Co

pp

er C

entra

l Offi

ce P

rod

ucts

— C

ross-C

onnect a

nd In

terc

onnect B

locks a

nd M

odule

s

3M Solutions Tool

The solutions tool is designed to show you the breadth of the 3M product line and

allow you to drill into specific categories to identify solutions.

To use this free Internet support tool, visit: http://www.3M.com/Telecom.

3M, Armorcast, Crimplok, Dynatel, Fibrlok, ID3000, MS2, Scotchcast, ScotchCode, Scotchfil, Scotch-Grip, Scotchkote, Scotchlite, Scotchlok, Scotchrap, SLiC, Tartan, VF-45 and Volition aretrademarks of 3M Company. Scotch is a registered trademark of 3M Company.

All other trademarks used herein are the properties of their respective owners.

Many of the products in this catalog are certified as compliant with RoHS standards. For a complete andupdated listing of specific RoHS-compliant products, refer to the 3M Communications Technologywebsite at www.3M.com/ROHS.

Important NoticeBefore using this product, you must evaluate it and determine if it is suitable for your intended application.You assume all risks and liability associated with such use.

Warranty; Limited Remedy; Limited Liability.3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NOOTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product isdefective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, toreplace or repair the 3M product or refund the purchase price of the 3M product. Except whereprohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss ordamage arising from this 3M product, regardless of the legal theory asserted.


Date post:	08-Mar-2018
Category:	Documents
Upload:	lydien
View:	218 times
Download:	1 times

Cross-Connect and Interconnect Blocks and...

Documents