7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 1/10

Crossover Cable

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 2/10

Step 1Cut into the plastic sheath 1 inch from

the end of the cut cable. The crimpingtool has a razor blade that will do the trickwith practice.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 3/10

Step 2

Unwind and pair the similar colors.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 4/10

Step 3inch the wires between !our "ngers

and straighten them out as shown. Thecolor order is important to do this correctl!.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 5/10

Step #Use wire cutter to make a straight cut

across the wires 1/2 inch from the cutsleeve to the end of the wires.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 6/10

Step $

ush the wires into the connector. %ach wire"ts into a slot in the &'#$ connector. (ote theposition of the blue plastic shielding. )lso

note how the wires go all the wa! to the end.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 7/10

Step * Take view from the top. +ake sure the

wires are all the wa! in. There should beno short wires.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 8/10

Step ,

Crimping the Cable - carefull! place theconnector into the %thernet Crimper andcinch down on the handles tightl!.

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 9/10

Step /or a cross0over cable 0 the other end will

have a dierent color order

7/17/2019 Crossover

http://slidepdf.com/reader/full/crossover-568e7df34adb6 10/10

Step +ake sure to test the cables before

installing them.