7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 2/10
Step 1Cut into the plastic sheath 1 inch from
the end of the cut cable. The crimpingtool has a razor blade that will do the trickwith practice.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 3/10
Step 2
Unwind and pair the similar colors.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 4/10
Step 3inch the wires between !our "ngers
and straighten them out as shown. Thecolor order is important to do this correctl!.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 5/10
Step #Use wire cutter to make a straight cut
across the wires 1/2 inch from the cutsleeve to the end of the wires.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 6/10
Step $
ush the wires into the connector. %ach wire"ts into a slot in the &'#$ connector. (ote theposition of the blue plastic shielding. )lso
note how the wires go all the wa! to the end.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 7/10
Step * Take view from the top. +ake sure the
wires are all the wa! in. There should beno short wires.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 8/10
Step ,
Crimping the Cable - carefull! place theconnector into the %thernet Crimper andcinch down on the handles tightl!.
7/17/2019 Crossover
http://slidepdf.com/reader/full/crossover-568e7df34adb6 9/10
Step /or a cross0over cable 0 the other end will
have a dierent color order