7/31/2019 CSI 9420 Wireless_para Clientes

1/13

CSI 9420 WirelessMachinery HealthTransmitterWireless HART Connectivity

7/31/2019 CSI 9420 Wireless_para Clientes

2/13

Company Confidential

CSI 9420 Wireless Machinery HealthTransmitterWhile sensor should be

mounted on the machinebeing monitored, thetransmitter should be mounted

off the machine.

Transmitter contains:signal processing,battery, radiocommunication

Overall Velocity,PeakVue and

Temperature scalarvalues

Transmitter can connectto one accelerometer,one accelerometer withembedded temperature,or two accelerometers

7/31/2019 CSI 9420 Wireless_para Clientes

3/13

Company Confidential

300 feet / 100 meters) ) )

Outputs (scalar values)

1. Overall Vibration Units: Velocity (in/sec or mm/sec)

Range: 2 Hz 1000 Hz (per ISO 10816 standard).Comment: Identifies problems like imbalance and looseness

2. PeakVueVibration Units: Gs PeakRange: 1,000 Hz 20,000 HzComment: Quantify early bearing & gearbox defects

3. Temperature Range: -30 to +250 F / -34 to +120 CComment: When sensor with embedded temperature used

CSI 9420 Wireless ApplicationPlace on any equipment

Mount transmitteraway from machine

Measurement processing Radio communication Power Module

1420Smart Wireless Gateway

CSI 9420Wireless Vibration Transmitter

Application Works on any equipment Not application specific

Typical: 10 ft / 3 m

7/31/2019 CSI 9420 Wireless_para Clientes

4/13

Company Confidential

Vibration Measurements MoreThan a Single Overall Value

Overall Vibration measured in Velocityunits (in/sec)

2Hz-1000Hz per ISO 10816 standard.Guidelines and tables in velocity units exist toguide plant engineers and maintenance staffson alert limits

PeakViewTM Overallmeasured in gs pk

PeakView is a numerical method to detectpeak vibration typically due to rolling elementbearing failures

1kHz to 20kHz

7/31/2019 CSI 9420 Wireless_para Clientes

5/13

Company Confidential

PeakVue Provides Superior BearingDefect Detection

PeakVue provides theearliest indication of abearing defect

Increase in PeakVue valueis proportional to bearing

defect severity In the late stage bearing

failure a decrease inPeakVue with acorresponding increaseOverall vibration indicateslate stage bearing failure.

7/31/2019 CSI 9420 Wireless_para Clientes

6/13

7/31/2019 CSI 9420 Wireless_para Clientes

7/13

Company Confidential

EDDL Enabled Trend of Sensor 1Velocity Value in AMS Device Manager

7/31/2019 CSI 9420 Wireless_para Clientes

8/13

Company Confidential

EDDL Enabled Gauges Show AllProcess Variables in a Single View

7/31/2019 CSI 9420 Wireless_para Clientes

9/13

Company Confidential

Fan Monitoring Application

Sensor mountedon the bearing.

Bearing defectdetected withPeakVue

7/31/2019 CSI 9420 Wireless_para Clientes

10/13

Company Confidential

Closer View of Early Stage BearingFault Identified with PeakVueTM

Bearing defect showsevidence of early-stage

Impacting.

7/31/2019 CSI 9420 Wireless_para Clientes

11/13

Company Confidential

Get Started With a CSI 9420 SmartPack

1420Gateway

CSI 9420Machinery Health

Transmitters

5 CSI 9420Transmitters

1 1420 Gateway

INSTALL service

SmartStart service AMS Device

Manager 5 Tag

HART Modem

SmartStart

INSTALL

7/31/2019 CSI 9420 Wireless_para Clientes

12/13

Company Confidential

CSI 9420 Advantages

Delivers overall velocity AND PeakVue per sensor

Overall measurement good down to 2Hz

Two channel inputs

Update rate configurable for 1 minute updates

Delivers data through same network as process valuestemperature, pressure, flow, level

Can communicate data to multiple hosts simultaneously

Wireless HART standard exists and will be part of ISA100

standard.

7/31/2019 CSI 9420 Wireless_para Clientes

13/13

Company Confidential