CSRProduct overview
2
Straight Neck Straight Neck Straight Neck Wide Neck Wide Neck Reduced Neck Reduced Neck
DAT-N connection DAT-N connection DAT connection DAT connection DAT connection DAT connection DAT connection
h ø 3.00ST ø 3.50ST ø 3.80ST ø 3.80 ø 4.20 ø 4.20RN ø 5.00RN
6.50 - VSR-ZT-350ST-065 VSR-ZT-380ST-065 VSR-ZT-380-065 VSR-ZT-420-065 VSR-ZT-420RN-065 VSR-ZT-500RN-065
8.50 VSR-ZT-300ST-085 VSR-ZT-350ST-085 VSR-ZT-380ST-085 VSR-ZT-380-085 VSR-ZT-420-085 VSR-ZT-420RN-085 VSR-ZT-500RN-085
10.00 VSR-ZT-300ST-100 VSR-ZT-350ST-100 VSR-ZT-380ST-100 VSR-ZT-380-100 VSR-ZT-420-100 VSR-ZT-420RN-100 VSR-ZT-500RN-100
11.50 VSR-ZT-300ST-115 VSR-ZT-350ST-115 VSR-ZT-380ST-115 VSR-ZT-380-115 VSR-ZT-420-115 VSR-ZT-420RN-115 VSR-ZT-500RN-115
13.00 VSR-ZT-300ST-130 VSR-ZT-350ST-130 VSR-ZT-380ST-130 VSR-ZT-380-130 VSR-ZT-420-130 VSR-ZT-420RN-130 VSR-ZT-500RN-130
15.00 VSR-ZT-300ST-150 VSR-ZT-350ST-150 VSR-ZT-380ST-150 VSR-ZT-380-150 VSR-ZT-420-150 VSR-ZT-420RN-150 -
18.00 - VSR-ZT-350ST-180 VSR-ZT-380ST-180 VSR-ZT-380-180 VSR-ZT-420-180 VSR-ZT-420RN-180 -
CSR implants
Surgical cover screw
DAT connection
VSR-VT
Surgical cover screw
DAT-N connection
VSR-VT-N
Connection diameter:
2.70 mm
Connection diameter:
3.00 mm
DAT-N CONNECTION DAT CONNECTION
Thread: M1.6 Thread: M1.8
Hexagon: 2.00 mm Hexagon: 2.30 mm
small profile
small profile
regular profile
regular profile
3
Easy Insert drivers for implants insertion
DAT-N connection
EASYC4-EX200-CA short
EASYL4-EX200-CA long
EASY4-EX200-EX with hexagonal connector
DAT connection
EASYC4-EX230-CA short
EASYL4-EX230-CA long
EASY4-EX230-EX with hexagonal connector
hfor CSR-FF-320 andCSR-FF-360 drills
for CSR-FF-440 drill
6.50 CSR-STOP-3236-065 CSR-STOP-440-065
8.50 CSR-STOP-3236-085 CSR-STOP-440-085
10.00 CSR-STOP-3236-100 CSR-STOP-440-100
11.50 CSR-STOP-3236-115 CSR-STOP-440-115
13.00 CSR-STOP-3236-130 CSR-STOP-440-130
15.00 CSR-STOP-3236-150 -
Final drills and related stops
CSR-FF-320for ø 3.50ST , ø 3.80 implants
CSR-FF-360for ø 3.80ST , ø 4.20 ,ø 4.20RN implants
CSR-FF-440for ø 5.00RNimplants
CSR surgical kit
ZCSR-INTcomplete surgical grommetless kit, of the the instruments necessary for CSR implants
CSR-TRAY-INT radel tray for instruments for CSR implants
For further information please refer to the surgical manual MC-IMP-CSR-E.
Precision drill
FS-230 Precision drill
Parallelism pin
PP-2/28
Screwdrivers
HSMXS-20-DG digital, extra-short
HSM-20-DG digital, short
HSML-20-DG digital, long
HSM-20-EX with hexagonal connector, short
HSML-20-EX with hexagonal connector, long
HSMXL-20-EX with hexagonal connector, extra-long
HSM-20-CA with right angle shank
AVV2-ABUT for straight P.A.D. abutments
Instruments included in the CSR surgical kit
Pilot and intermediate drills and related stops
CSR-FP-200 pilot drill
CSR-FI-280 intermediate drill
h
6.50 CSR-STOP-2028-065
8.50 CSR-STOP-2028-085
10.00 CSR-STOP-2028-100
11.50 CSR-STOP-2028-115
13.00 CSR-STOP-2028-130
15.00 CSR-STOP-2028-150
Adaptors and extensions
BPM-15extension for instruments with hexagonal connector
PROF-CAL3 extension for surgical drills
B-AVV-CA3screwdriver for right angle instruments with hexagonal connector for ratchet, digital
AVV-CA-DG-EX adaptor for right angle instruments
PAD-VTRAL-140-MANP.A.D. transfer screw for manual screwing
TWL-AVV-EXadaptor for torque wrench with control level TWL
X-ray templatesImpianto cilindrico con connessione conica Cylindrical implant with conical connection
A ø maxH altezza fixture
A
H
RIPRODUZIONE SCALA REALE - REAL DIMENSIONS
CSR-
L100
rev.
07/1
8
VSR-ZT-300ST-085 VSR-ZT-300ST-100 VSR-ZT-300ST-115 VSR-ZT-300ST-130 VSR-ZT-300ST-150
VSR-ZT-350ST-085
VSR-ZT-380ST-085
VSR-ZT-380-085
VSR-ZT-350ST-065
VSR-ZT-380ST-065
VSR-ZT-380-065
VSR-ZT-350ST-100
VSR-ZT-380ST-100
VSR-ZT-380-100
VSR-ZT-350ST-115
VSR-ZT-380ST-115
VSR-ZT-380-115
VSR-ZT-350ST-130
VSR-ZT-380ST-130
VSR-ZT-380-130
VSR-ZT-350ST-150
VSR-ZT-380ST-150
VSR-ZT-380-150
VSR-ZT-350ST-180
VSR-ZT-380ST-180
VSR-ZT-380-180
VSR-ZT-420-085VSR-ZT-420-065 VSR-ZT-420-100 VSR-ZT-420-115 VSR-ZT-420-130 VSR-ZT-420-150 VSR-ZT-420-180
VSR-ZT-420RN-085VSR-ZT-420RN-065 VSR-ZT-420RN-100 VSR-ZT-420RN-115 VSR-ZT-420RN-130
VSR-ZT-500RN-085VSR-ZT-500RN-065
A ø 4.10 mm
A ø 4.50 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 3.80 mm
A ø 3.50 mm
A ø 3.10 mmH 15.00 mm
H 15.00 mm
H 15.00 mm
H 15.00 mm
H 15.00 mm
H 15.00 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 3.80 mm
A ø 3.50 mmH 18.00 mm
H 18.00 mm
H 18.00 mm
H 18.00 mm
H 18.00 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 5.00 mm
A ø 3.80 mm
A ø 3.50 mm
A ø 3.10 mmH 8.50 mm
H 8.50 mm
H 8.50 mm
H 8.50 mm
H 8.50 mm
H 8.50 mm
H 8.50 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 5.00 mm
A ø 3.80 mm
A ø 3.50 mm
A ø 3.10 mmH 10.00 mm
H 10.00 mm
H 10.00 mm
H 10.00 mm
H 10.00 mm
H 10.00 mm
H 10.00 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 5.00 mm
A ø 3.80 mm
A ø 3.50 mm
A ø 3.10 mmH 11.50 mm
H 11.50 mm
H 11.50 mm
H 11.50 mm
H 11.50 mm
H 11.50 mm
H 11.50 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 5.00 mm
A ø 3.80 mm
A ø 3.50 mm
A ø 3.10 mmH 13.00 mm
H 13.00 mm
H 13.00 mm
H 13.00 mm
H 13.00 mm
H 13.00 mm
H 13.00 mm
A ø 4.10 mm
A ø 4.20 mm
A ø 4.50 mm
A ø 5.00 mm
A ø 3.80 mm
A ø 3.50 mmH 6.50 mm
H 6.50 mm
H 6.50 mm
H 6.50 mm
H 6.50 mm
H 6.50 mm
VSR-ZT-500RN-100 VSR-ZT-500RN-115 VSR-ZT-500RN-130
VSR-ZT-420RN-150 VSR-ZT-420RN-180
ø 35
0 ST
RA
IGH
Tø
300
STR
AIG
HT
ø 38
0 ST
RA
IGH
Tø
380
WID
E N
ECK
ø 42
0 R
EDU
CED
NEC
Kø
420
WID
E N
ECK
ø 50
0 R
EDU
CED
NEC
K
CSR-L100 real dimensions
CSR-L120 20% increased dimensions
CSR-L130 30% increased dimensions
Torque wrench with control lever recommended for surgical use
TWL
Countersink drills
FGS-200/300 for ø 3.00ST implants
CSR-FC-380 for ø 3.80 implants
CSR-FC-420 for ø 4.20 implants
4
Optional instruments(not included in the CSR surgical kit)
Drills for distal sectors
ø ø
2.00 FPT5-200-LXS 3.30 FFT5-330-LXS
2.80 FFT5-280-LXS 3.40 FFT5-340-LXS
2.90 FFT5-290-LXS 3.60 FFT5-360-LXS
3.00 FFT5-300-LXS 4.25 FFT5-425-LXS
3.20 FFT5-320-LXS 4.45 FFT5-445-LXS
Osteotomes
flat tip
E-OS-020-PP tip ø 0.20
E-OS-090-PP tip ø 0.90
concave tip
E-OS-160-PC tip ø 1.60
E-OS-200-PC tip ø 2.00
E-OS-240-PC tip ø 2.40
Drivers to remove implants
DAT-N connection
BC-EX200 short
BL-EX200 long
DAT connection
BC-EX230 short
BL-EX230 long
Optional screwdrivers
HSMXS-20-CA with right angle shank, extra short
AVV-CAP-TIT-1instrument for the maintaining of the titanium cap for ball attachments
BASCC-EXwith hexagonal connector, for ball attachments
08007 for Locator R-Tx, digital
08008right angle screwdriver for Locator R-Tx abutments
Spare O-ring
ORING180-088
P.A.D. carrier
PAD-CAR
Parallelism pins
PPTL-2-28
PPTS-2-28
Depth gauge
PROF3
Ratchet recommended for prosthetic use
CRI5-KIT
For further information please refer to the surgical manual MC-IMP-CSR-E.
5
Closed-tray transfers
DAT-N connection DAT connection
VSR-TRAS-N VSR-TRASPEEK cap not included
VSR-CAP-N U-CAPM-380PEEK cap, for impression taking
For further information please refer to the prosthetic manual MP-IMP-CSR-E.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VTRA-160-08 included. | DAT: screw VSR-VTRA-180-08 included.
DAT-N: screw VSR-VTRA-160-15 included. | DAT: screw VSR-VTRA-180-15 included. DAT-N: screw VSR-VTRA-160-08 included. | DAT: screw VSR-VTRA-180-08 included.
Healing abutments
transgingival height DAT-N connection DAT connection
1.00 VSR-TMG-N-1-S VSR-TMG-1-S
small profile
2.00 VSR-TMG-N-2-S VSR-TMG-2-S
3.00 VSR-TMG-N-3-S VSR-TMG-3-S
4.00 VSR-TMG-N-4-S VSR-TMG-4-S
5.00 VSR-TMG-N-5-S VSR-TMG-5-S
1.00 - -
regular profile
2.00 VSR-TMG-N-2 VSR-TMG-2
3.00 VSR-TMG-N-3 VSR-TMG-3
4.00 VSR-TMG-N-4 VSR-TMG-4
5.00 VSR-TMG-N-5 VSR-TMG-5
Analogs
DAT-N connection DAT connection
VSR-ANA-N VSR-ANA
Soft tissue conditioning
Impression and model phasePick-up transfers
DAT-N connection DAT connection
VSR-TRA-N-S VSR-TRA-S small profile
VSR-TRA-N VSR-TRA regular profile
Tissue conditioner
DAT-N connection DAT connection
VSR-RCT-N VSR-RCT
Temporary posts
DAT-N connection DAT connection
VSR-MPSC-N VSR-MPSCSimple in PEEK with a Gr. 5 titanium baseengaging
VSR-MP-N VSR-MPSimple in Gr. 5 titanium engaging
VSR-MP-N-ROT VSR-MP-ROTSimple in Gr. 5 titanium non engaging
Extraction system for postsExtraction system for posts - DAT-N connection
VSR-EXTR-N Complete extraction system (guide and screw)
VSR-EXTR-N-Gextraction screw guide
VSR-EXTR-N-V extraction screw
Extraction system for posts - DAT connection
VSR-EXTRComplete extraction system (guide and screw)
VSR-EXTR-Gextraction screw guide
VSR-EXTR-V extraction screw
Guide stop key
CM2
Digital knob for extractor
AVV3-MAN-DG
6
Pre-made posts angled at 15° - engaging
DAT-N connection DAT connection
VSR-MAPF15-N VSR-MAPF15 small profile
VSR-MA15-N VSR-MA15 regular profile
Pre-made posts angled at 25° - engaging
DAT-N connection DAT connection
VSR-MA25-N VSR-MA25 small profile
VSR-MAPF25-N VSR-MAPF25 regular profile
Straight pre-made posts for direct screwing - non engaging
DAT-N connection DAT connection
VSR-MDAD-N VSR-MDADpre-made posts
VSR-ANAMD-N VSR-ANAMDanalogs for straight pre-made posts
Straight pre-made posts for direct screwing - engaging
transgingival height DAT-N connection DAT connection
1.00 VSR-MDPF-N VSR-MDPFsmall profile
2.00 VSR-MD-N-2 VSR-MD-2
regular profile
3.00 VSR-MD-N-3 VSR-MD-3
4.00 VSR-MD-N-4 VSR-MD-4
Posts
Straight pre-made posts
Castable posts with a metal base
Angled pre-made posts
Preparable posts
PEEK cap for impression taking directly on posts
DAT-N connection DAT connection
VSR-CAP-N U-CAPM-380 PEEK cap
Preparable posts - engaging
DAT-N connection DAT connection
VSR-MF-N-S VSR-MF-S small profile
VSR-MF-N VSR-MF regular profile
Preparable posts - engaging
DAT-N connection DAT connection
VSR-MFP-N VSR-MFP regular profile
Castable posts with a metal base - engaging
DAT-N connection DAT connection
- VSR-UC-Ssmall profilebase in gold alloy “1”
- VSR-UCRCO-Ssmall profilebase in cobalt chrome
VSR-UC-N -regular profilebase in gold alloy “1”
VSR-UCRCO-N VSR-UCRCOregular profilebase in cobalt chrome
Castable posts with a metal base - non engaging
DAT-N connection DAT connection
VSR-UC-N-ROT VSR-UC-ROTregular profilebase in gold alloy “1”
VSR-UCRCO-N-ROT VSR-UCRCO-ROTregular profilebase in cobalt chrome
Spare castable sleeves for castable posts with a metal base
DAT-N connection DAT connection
- A-CCUCR-330 small profile
VSR-CCUC-N A-CCUCR-380 regular profile
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
For further information please refer to the prosthetic manual MP-IMP-CSR-E.
7
P.A.D. abutments (Disparallel Screwed Prosthesis)
PLAIN abutments
Abutments
Straight P.A.D. abutments
transgingival height DAT-N connection DAT connection
1.00 VSR-PAD-AD-N-10 VSR-PAD-AD-10
2.00 VSR-PAD-AD-N-20 VSR-PAD-AD-20
3.00 VSR-PAD-AD-N-30 VSR-PAD-AD-30
4.00 VSR-PAD-AD-N-40 VSR-PAD-AD-40
PLAIN abutments
transgingival height
DAT-N connection DAT connection
2.00 VSR-PLAIN-N-ABU-2 VSR-PLAIN-ABU-2
3.00 VSR-PLAIN-N-ABU-3 VSR-PLAIN-ABU-3
4.00 VSR-PLAIN-N-ABU-4 VSR-PLAIN-ABU-4
Components for PLAIN abutments
DAT-N connection DAT connection
A-PLAIN-CG330 A-PLAIN-CG380 healing caps
A-PLAIN-CC330 A-PLAIN-CC380 castable sleeves
A-PLAIN-CT330 A-PLAIN-CT380 titanium sleeves
A-PLAIN-TRA-330 A-PLAIN-TRA-380 Pick-up transfers
A-PLAIN-ANA-330 A-PLAIN-ANA-380 analogs
Angled P.A.D. abutments
transgingival height DAT-N connection DAT connection
3.00 VSR-PAD-AA-N-173 VSR-PAD-AA-173angledat 17°
3.00 VSR-PAD-AA-N-303 VSR-PAD-AA-303angledat 30°
P.A.D. components for overstructures
Protection caps
unique platform
PAD-CG in Gr. 5 titanium
PAD-CGP in PEEK
Impression and model phase
unique platform
PAD-CAP POM caps, non engaging
PAD-CAP-EX POM caps, engaging
PAD-TRApick-up transfers in Gr. 5 titanium, non engaging
PAD-TRA-EX pick-up transfers in Gr. 5 titanium, engaging
PAD-ANA analog for P.A.D. abutment in Gr. 5 titanium
Castable abutments with a metal base
unique platform
PAD-UC in PMMA with base in gold alloy “1”, non engaging
PAD-UCRCO in PMMA with base in cobalt chrome, engaging
P.A.D. prostheses for D.P.F. technique
unique platform
PAD-CT-LV spare titanium sleeve
PAD-CC-LV castable centring device
PAD-TR-LV anti-escape plug
PAD-ORING-LV protection O-ring
PAD-LVcomplete pack of the prosthetic componentsfor the “D.P.F.” technique
BARC castable bar, l 5 cm, ø 2.20 mm
P.A.D. components for prosthesis relining and luting technique
unique platform
PAD-CP PEEK sleeve for relining, non engaging
PAD-CP-EX PEEK sleeve for relining, engaging
PAD-CTGr. 5 titanium sleeve for relining and luting, non engaging
PAD-CT-EXGr. 5 titanium sleeve for relining and luting, engaging
PAD-CCEM PMMA castable sleeve for Gr. 5 titanium sleeves
PAD-CC PMMA castable sleeve, non engaging
PAD-CC-EX PMMA castable sleeve, engaging
Screw PAD-VP-140 included.
Pick-up transfer: screw PAD-VTRAL-140 included.
PEEK, Gr. 5 titanium and PMMA sleeves: screw PAD-VP-140 included.
Screw PAD-VP-140 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
Titaniums sleeve screw PAD-VP-140 included.
Castable and titanium sleeves: screw A-PLAIN-VP200 included.
Pick-up transfer: screw A-PLAIN-VTRA200 included.
For further information please refer to the prosthetic manual MP-IMP-CSR-E.
8
Customized abutments and screw retained crowns (full or with luting support)
Full bridges or bridges with luting supportDIRECT/TORONTO Full bridges or bridgeswith luting support
Milled bars tightened on implants
CAD-CAM prosthetic solutions
Scanbodies
T-Connect supports for single prosthesis
transgingivalheight
cone height
DAT-N connection DAT connection
2.00 4.00 VSR-BASTZR-N-S-4 VSR-BASTZR-S-4
2.00 6.00 VSR-BASTZR-N-S-6 VSR-BASTZR-S-6
3.00 4.00 - VSR-BASTZR-S-4-T3
3.00 6.00 - VSR-BASTZR-S-6-T3
4.00 4.00 - VSR-BASTZR-S-4-T4
4.00 6.00 - VSR-BASTZR-S-6-T4
Supports for luting technique
Sleeves for wax-up modeling on T-Connect supports
cone height
unique platform
4.00 A-CCBAS-330-4
6.00 A-CCBAS-330-6
Titanium sleeves for P.A.D. abutments
PAD-BASTZR
Chairside T-Connect supports
transgingivalheight
cone height
DAT-N connection DAT connection
2.00 5.00 VSR-TCS-N-S-C VSR-TCS-L-C
3.00 5.00 VSR-TCS-N-S-C-T3 VSR-TCS-L-C-T3
4.00 5.00 VSR-TCS-N-S-C-T4 VSR-TCS-L-C-T4
Scanbodies - to transfer implant connection position
DAT-N connection DAT connection
VSR-CAMETRA-N VSR-CAMETRAlaboratory scanbodies in Ergal*
VSR-INT-CAMTRA-N VSR-INT-CAMTRA
scanbodies in PEEK with Gr. 5 titanium base, for intraoral use**
Scanbodies for laboratory and intaoral use in titanium*
DAT-N connection DAT connection
VSR-INT-CAMTRA-N-L VSR-INT-CAMTRA-Lto transfer implant connection position
Scanbodies - to transfer P.A.D. abutment connection
unique platform
PAD-CAMETRA500 laboratory scanbodies in Ergal
PAD-INT-CAMTRAscanbodies in PEEK with Gr. 5 titanium base, for intraoral use
T-Connect supports for multiple prosthesis
transgingival height
cone height
DAT-N connection DAT connection
2.00 4.00 VSR-BASTZR-N-M-4 VSR-BASTZR-M-4
2.00 6.00 VSR-BASTZR-N-M-6 VSR-BASTZR-M-6
3.00 4.00 VSR-BASTZR-N-M-4-T3 VSR-BASTZR-M-4-T3
3.00 6.00 VSR-BASTZR-N-M-6-T3 VSR-BASTZR-M-6-T3
4.00 4.00 VSR-BASTZR-N-M-4-T4 VSR-BASTZR-M-4-T4
4.00 6.00 VSR-BASTZR-N-M-6-T4 VSR-BASTZR-M-6-T4
* DAT-N: screw VSR-VTRA-160-10 included. | DAT: screw VSR-VTRA-180-10 included.** DAT-N screw VSR-VM-N-160-LAB included. | DAT: screw VSR-VM-180-LAB included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.*Soon available on the martket.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
For further information please refer to the prosthetic manual MP-IMP-CSR-E.
Premilled
Premilled in titanium
DAT-N connection DAT connection
VSR-CAMT-N-12-SW VSR-CAMT-12-SW
Screw PAD-VP-140 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included. DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included.
Screw PAD-VP-140 included.
9For further information please refer to the prosthetic manual MP-IMP-CSR-E.
Retainers and spacer rings for R-Tx Locator abutments
unique platform
30001grey, without retention, disparallelism up to 30° each side, pack of 4 pcs
30002blue, low retention, disparallelism up to 30° each side, pack of 4 pcs
30003pink, medium retention, disparallelism up to 30° each side, pack of 4 pcs
30004white, high retention, disparallelism up to 30° each side, pack of 4 pcs
30005light blue, extra retention, disparallelism up to 30° each side, pack of 4 pcs
30012black, for the impression taking, disparallelism up to 30° each side, pack of 4 pcs
08514spacer rings for the prosthetis relining phase, pack of 20 pcs
30013
kit containing 2 caps, 2 spacer rings, 2 black retainers for the impression taking and 2 inserts for each of of the four retention retention levels
Locator Core Tool
30021
Solutions for overdenture
Components on bars
Caps for ball attachments
unique platform
CAP-TFL-1 polyamide cap
CONT-CAP-TFL-1 steel container for polyamide cap
CAP-TIT-1 Gr. 5 titanium cap complete with cap in two parts, titanium retention spring and plastic mounting ring
AN-CAP-TIT-1 spare plastic ring
MOL1-CAP-TIT-1 spare retention spring for titanium caps, average hardness
MOL2-CAP-TIT-1 spare retention spring for titanium caps, soft, for progressive adaptation of prostheses
CAP-1 gold alloy “2” cap, complete with 3 plastic positioning rings and a tin spacer for the laboratory
Overdenture on bars
BARC-CAV-TIT castable bar, l 5.00 cm, h 3.00 mm, thickness 2.20 mm, ovoid-shaped profile with spacer
CAV-TIT divisible bar attachment in titanium for oval bars, h 3.00 mm, thickness 2.20 mm
BARC castable bar, l 5.00 cm, ø 2.20 mm
CAV-375 bar attachment in gold alloy “3” for round bars ø 2.20 mm
R-Tx Locator abutments and accessories
R-Tx Locator abutments - ø 3.35
transgingival height
DAT-N connection DAT connection
1.00 31101-01 31100-01
2.00 31101-02 31100-02
3.00 31101-03 31100-03
4.00 31101-04 31100-04
5.00 31101-05 31100-05
6.00 31101-06 31100-06
Accessories for R-Tx Locator abutments
unique platform
30014aluminium analogs for abutments ø 3.35,pack of 4 pcs
30015aluminium analogs for abutments ø 4.00,pack of 4 pcs
30016aluminium analogs for abutments ø 5.00,pack of 4 pcs
30017 transfers with low retention, pack of 4 pcs
30018 spacer rings for relining phase, pack of 4 pcs
Ball attachments and accessories
Ball attachments
transgingival height
DAT-N connection DAT connection
1.00 VSR-AS-N-1 VSR-AS-1
2.00 VSR-AS-N-2 VSR-AS-2
3.00 VSR-AS-N-3 VSR-AS-3
4.00 - VSR-AS-4
Analog for ball attachments
unique platform
ANAS
10
Laboratory screws for posts, angled P.A.D. abutments, T-Connect and scanbodies
VSR-VM-N-160-LABDAT-N
VSR-VM-N-160-LAB-10 pack of 10 pcs
VSR-VM-180-LABDAT
VSR-VM-180-LAB-10 pack of 10 pcs
Recommended torque for tightening prosthetic components
8-10 Ncm surgical cover screws, healing abutments
20-25 Ncm prosthetic screws
25-30 Ncm direct screwing on implants prosthetic components
8-10 Ncm transfer screws
8-10 Ncm laboratory screws
Clinical and laboratory prosthetic screws
Screws for P.A.D. abutments
PAD-VTRA-140 for P.A.D. transfers
PAD-VTRAL-140 for P.A.D. transfers, long
PAD-VTRAL-140-MAN for P.A.D. transfers, manual screwing
PAD-VP-140 for P.A.D. abutments
PAD-VP-140-10 pack of 10 pcs
Screws for closed-tray transfers
VSR-VTRA-160-08 DAT-Nh 8.00
VSR-VTRA-180-08 DAT
VSR-VTRA-160-10 DAT-Nh 10.00
VSR-VTRA-180-10 DAT
Screws for soft tissue conditioners
VSR-VTRA-160-08 DAT-N
VSR-VTRA-180-08 DATScrews for laboratory scanbodies
VSR-VTRA-160-10 DAT-N
VSR-VTRA-180-10 DAT
Screws for Pick-up transfers
VSR-VTRA-160-15 DAT-Nh 15.00
VSR-VTRA-180-15 DAT
VSR-VTRA-160-20 DAT-Nh 20.00
VSR-VTRA-180-20 DAT
VSR-VTRA-160-MAN DAT-Nfor manual screwing
VSR-VTRA-180-MAN DAT
Screws for PLAIN abutments
A-PLAIN-VP200 for PLAIN sleeves
A-PLAIN-VP200-10 pack of 10 pcs
A-PLAIN-VTRA200 for PLAIN abutments Pick-up transfers
Screws for CAD-CAM customized prosthesis
PAD-VCAM140for zirconium oxide ECHO overstructureson P.A.D. abutments
CAMPRON205-10spare long ring washers for the head ofthe fixation screw
For further information please refer to the prosthetic manual MP-IMP-CSR-E.
WarningFixation screws are always included in the packaging of each prosthetic component,unless otherwise indicated.Please use laboratory screws for laboratory phases and keep the screw included with theprosthetic component for the final fastening in the patient’s mouth.
Screws for posts, angled P.A.D. abutments, T-Connect and scanbodies
VSR-VM-N-160DAT-N
VSR-VM-N-160-10 pack of 10 pcs
VSR-VM-180DAT
VSR-VM-180-10 pack of 10 pcs
The implants, standard prosthetic components and surgical instruments contained in this catalogue are Medical devices and are manufactured by Sweden & Martina S.p.A., except for Locator abutments, which are medical devices manufactured and patented by Zest Anchors, Inc.,2875 Loker Avenue EastCarlsbad, CA 92010, USA.They conform to the ISO 9001 and ISO 13485 standards and are certified with the CE Mark in compliance with the European Medical Devices Directive 93/42/EEC and Regulation (EU) Medical Devices n. 2017/745.The Sweden & Martina plant manufactures Medical Devices in compliance with the CGMPs in force in the USA and in other countries worldwide.
Some products may not be regulatory/released for sale in all markets.All trademarks herein are the property of Sweden & Martina S.p.A. unless otherwise indicated.This material is intended for laboratories and clinicians and is not intended for patient distribution.This material is not to be redistributed, duplicated, or disclosed without the express written consent of Sweden & Martina S.p.A.For additional product information, including indications, contraindications, warnings, precautions, and potential adverse effects, see Sweden & Martina S.p.A. website.
The contents are updated at the time of publication. Check with the company for any subsequent updates.
rev. 01-20
Sweden & Martina LtdUnit 45 Basepoint Business Centre Metcalf Way, Crawley,West Sussex, RH11 7XX, UK Toll free 0800 [email protected]
Sweden & Martina S.p.A.Via Veneto, 1035020 Due Carrare (PD), ItalyTel. +39.049.9124300Fax [email protected]
www.sweden-martina.com
Sweden & Martina Mediterranea S.L. - Españ[email protected] & Martina Lda - [email protected]
Sweden & Martina Inc. Distributor for U.S.637 S. 48th St., Suite 21 Tempe, AZ 85281, USToll free 1-844-8MARTINA (1-844-862-7846)[email protected]
www.sweden-martinainc.com