NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Key Elevation
NorthClad Standard
Key
Elev
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
Project Sheet Title
Scale
Job Number
Sheet
DET
Key Elev
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
A
DET
B
DET
C
DET
D
DETE
DET
G1
DET
H1
DET
J1
DET
J2
DET
J3
DET
K1
DET
K2
DET
K3
DET
M1
DET
M2
DET
M3
DET
N1
DETN2
DET
P1
DET
P2
DET
Q1
DET
F
DET
A. Section - Horzontal Joint
B. Plan - Vertical Joint
C. Section - Base of Wall
D. Section - Composite Coping
E. Isometric - Composite Coping Splice
F. Section - Formed Coping
G1. Plan - Outside Corner
H1. Plan - Inside Corner
J1. Section - Window Head
J2. Section - Louver Head
J3. Section - Door Head
N2. Section - Louver Sill
P1. Section - Fascia to Soffit
P2. Section - Fascia to Soffit
Q1. Section - Soffit at Top of Wall
K1. Plan - Window at Left Jamb
K2. Plan - Louver at Left Jamb
K3. Plan - Door at Left Jamb
M1. Plan - Window at Right Jamb
M2. Plan - Louver at Right Jamb
M3. Plan - Door at Right Jamb
N1. Section - Window Sill
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Project Sheet Title
Scale
Job Number
Sheet
DET
Index
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
A Section - Horzontal Joint
DET
138" at Spline
Pan
el D
imen
sion
Pan
el D
imen
sion
12"
2"
78"
WRB not by NorthClad
"ACMP4M" Extrusion, Set inSealant, at Edge of Panel
"ACMFCM" Extrusion, Provided in6" Pieces, Located 16" O.C.,Attached with #12 Screws
Countersunk Screws at 16" O.C.
"ACMP4M" Extrusion Set inSealant at Edge of Panel
"ACMFCM" Extrusion Attached toTop "ACMP4M" Extrusion with#10 Screw
4mm Ziinc Composite Metal(ZCM) Panel
14" x 1" Weep Holes 16" O.C.
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET A
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
B Plan - Vertical Joint
DET
138" at Spline
Panel DimensionPanel Dimension
14" x 1" Weep Holes 16" O.C.
WRB not by NorthClad
"ACMP4M" Extrusion Set inSealant at Edge of Panel
"ACMFCM" Extrusion Provided in 6"Pieces, Located at 16" O.C., Attachedwith #12 Screws
"ACMFCM" ExtrusionAttached to Right Side
"ACMP4M" Extrusion with#10 Fastener
4mm Ziinc Composite Metal (ZCM)Panel"ACMP4M" Extrusion Set in Sealantat Edge of Panel
12"
2"
78"
Countersunk Screws at 16" O.C.
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET B
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
C Section - Base of Wall
DET
14" x 1" Weep Holes 16" O.C.
WRB not by NorthClad
"ACMJM" Extrusion Attached with#12 Screws, 16" O.C.
"ACMP4M" Extrusion Set in Sealantat Edge of Panel
Flashing not by NorthClad
Pan
el D
imen
sion
12"
4mm Ziinc Composite Metal (ZCM) Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET C
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
D Section - Composite Coping
DET
PerPlan
78"
2"
78"
PerPlan
Top Of Coping
4mm ZiincComposite Metal(ZCM) Panel
WRB not byNorthClad
See A/DET forTypical SystemCall Outs
85° Angle, ShopApplied, Set inContinuousSealant
95° Angle, ShopApplied,
Continuous Setin Sealant
6" LongComposite Metal
Butt Plate (SeeE/DET)
"ACMP4M"Extrusion
"ACMHCM"Extrusion
Provided in 6"Pieces, Located
at 16" O.C.,Attached with (2)
#14 Screws
F.V.
12"
5° Slope
Pan
el D
imen
sion
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET D
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
E Isometric - Composite Coping Splice
DET
PanelDimension
PanelDimension
12"
Line of "ACMP4M"Extrusion Below
Line of "ACMHCM"Extrusion Below
95° Angle, Shop Applied,Continuous Set in Sealant
85° Angle, Shop Applied,Set in Continuous Sealant
Line of "ACMP4M"Extrusion Below
Line of "ACMFCM"Extrusion Below
WRB not byNorthClad
WRB not byNorthClad
Field Applied Sealant at Butt Plate
Field Applied Sealant at Butt Plate
6" Long Composite Metal Butt Plate
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET E
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
F Section - Formed Coping
DET
12"
Butyl Tape
6"
120"120"
F.V.
F.V.
Pan
el D
imen
sion
1"Minimum
F.V.
"ACMHCM" ExtrusionProvided in 6" Pieces,Located at 16" O.C.,Attached with #12 Screws
WRB not by NorthClad
4mm Ziinc Composite Metal(ZCM) Panel
Coping not by NorthClad
Top Of Coping
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET F
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
G1 Plan - Outside Corner
DET
PanelDimension
PanelDimension
Pan
elD
imen
sion
Pan
elD
imen
sion
12"
12"
WRB not by NorthClad
4mm Ziinc Composite Metal(ZCM) Panel
14" x 1" Weep Holes 16" O.C.
See A/DET for Typical SystemCall Outs
Shop Fabricated Corner,Assembled with FormedReinforcement Corner at Timeof Installation, UsingStructural Sealant
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET G1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
H1 Plan - Inside Corner
DET
PanelDimension
Pan
elD
imen
sion
12"
WRB not by NorthClad
14" x 1" Weep Holes 16" O.C.
4mm Ziinc Composite Metal (ZCM) Panel
See B/DET for Typical System Call Outs
112"
12"
Pan
elD
imen
sion
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET H1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
J1 Section - Window Head
DET
12"
Flashing not by NorthClad
Primary Seal not byNorthClad
Secondary Seal not byNorthClad
4mm Ziinc Composite Metal(ZCM) Panel
WRB not by NorthClad
Flashing not by NorthClad
Window System andSealant not by NorthClad
See B/DET for TypicalSystem Call Outs
Pan
el D
imen
sion
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET J1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
J2 Section - Louver Head
DET
Pan
el D
imen
sion
Flashing not by NorthClad
Primary Seal not byNorthClad
Secondary Seal not byNorthClad
4mm Ziinc Composite Metal(ZCM) Panel
WRB not by NorthClad
Flashing not by NorthClad
Louver System and Sealantnot by NorthClad
See B/DET for TypicalSystem Call Outs
12"
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET J2
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
J3 Section - Door Head
DET
Pan
el D
imen
sion
Flashing not by NorthClad
Primary Seal not byNorthClad
Secondary Seal not byNorthClad
4mm Ziinc Composite Metal(ZCM) Panel
WRB not by NorthClad
Flashing not by NorthClad
Door System and Sealantnot by NorthClad
See B/DET for TypicalSystem Call Outs
12"
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET J3
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
K1 Plan - Window at Left Jamb
DET
12"
WRB not by NorthClad
"ACMHCM" Extrusion Providedin 6" Pieces, Located at 16"O.C., Attached with #12Screws
"ACMP4M" Extrusion Set inSealant at Edge of Panel
Flashing not by NorthClad
Primary Seal not by NorthClad
Secondary Seal not byNorthClad
Window System and Sealantnot by NorthClad
Flashing not by NorthClad
Panel Dimension
14" x 1" Weep Holes 16" O.C.
4mm Ziinc Composite Metal (ZC
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET K1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
K2 Plan - Louver at Left Jamb
DET
12"
Panel Dimension
WRB not by NorthClad
"ACMHCM" Extrusion Providedin 6" Pieces, Located at 16"O.C., Attached with #12Screws
"ACMP4M" Extrusion Set inSealant at Edge of Panel
Flashing not by NorthClad
Primary Seal not by NorthClad
Secondary Seal not byNorthClad
Louver System and Sealantnot by NorthClad
Flashing not by NorthClad
14" x 1" Weep Holes 16" O.C.
4mm Ziinc Composite Metal (ZC
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET K2
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
K3 Plan - Door at Left Jamb
DET
12"
Panel Dimension
WRB not by NorthClad
"ACMHCM" Extrusion Providedin 6" Pieces, Located at 16"O.C., Attached with #12Screws
"ACMP4M" Extrusion Set inSealant at Edge of Panel
Flashing not by NorthClad
Primary Seal not by NorthClad
Secondary Seal not byNorthClad
Door System and Sealant notby NorthClad
Flashing not by NorthClad
14" x 1" Weep Holes 16" O.C.
4mm Ziinc Composite Metal (ZC
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET K3
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
M1 Plan - Window at Right Jamb
DET
12"
WRB not byNorthClad
"ACMHCM" ExtrusionProvided in 6"
Pieces, Located at16" O.C., Attached
with #12 Screws
"ACMP4M" ExtrusionSet in Sealant at
Edge of Panel
Flashing not byNorthClad
Primary Seal not byNorthClad
Secondary Seal notby NorthClad
Window System andSealant not by
NorthClad
Flashing not byNorthClad
Panel Dimension
14" x 1" Weep
Holes 16" O.C.4mm CompositeMetal Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET M1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
M2 Plan - Louver at Right Jamb
DET
12"
Panel Dimension
WRB not byNorthClad
"ACMHCM" ExtrusionProvided in 6"
Pieces, Located at16" O.C., Attached
with #12 Screws
"ACMP4M" ExtrusionSet in Sealant at
Edge of Panel
Flashing not byNorthClad
Primary Seal not byNorthClad
Secondary Seal notby NorthClad
Louver System andSealant not by
NorthClad
Flashing not byNorthClad
14" x 1" Weep
Holes 16" O.C.4mm CompositeMetal Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET M2
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
M3 Plan - Door at Right Jamb
DET
12"
Panel Dimension
WRB not byNorthClad
"ACMHCM" ExtrusionProvided in 6"
Pieces, Located at16" O.C., Attached
with #12 Screws
"ACMP4M" ExtrusionSet in Sealant at
Edge of Panel
Flashing not byNorthClad
Primary Seal not byNorthClad
Secondary Seal notby NorthClad
Door System andSealant not by
NorthClad
Flashing not byNorthClad
14" x 1" Weep
Holes 16" O.C.4mm CompositeMetal Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET M3
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
N1 Section - Window Sill
DET
Window System not by NorthClad
Flashing not by NorthClad
Primary Seal, not by NorthClad
Secondary Seal, not by NorthClad
Flashing not by NorthClad
"ACMHCM" Extrusion Provided in6" Pieces, Attached to Top"ACMP4M" Extrusion with #10Fastener Located at 16" O.C.,Attached with #12 Screws
4MM Composite Panel
WRB not by NorthClad
Pan
el D
imen
sion
12"
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET N1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
N2 Section - Louver Sill
DET
Louver System not by NorthClad
Flashing not by NorthClad
Primary Seal, not by NorthClad
Secondary Seal, not by NorthClad
Flashing not by NorthClad
"ACMHCM" Extrusion Provided in6" Pieces, Attached to Top"ACMP4M" Extrusion with #10Fastener Located at 16" O.C.,Attached with #12 Screws
4MM Composite Panel
WRB not by NorthClad
Pan
el D
imen
sion
12"
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET N2
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
P1 Section - Fascia to Soffit
DET
PanelDimension
PanelDimension
Pan
elD
imen
sion
Pan
elD
imen
sion
12"
12"
WRB not by NorthClad
14" x 1" Weep Holes 16" O.C.
See A/DET for Typical SystemCall Outs
Shop Fabricated Corner,Assembled with FormedReinforcement Corner at Timeof Installation using StructuralSealant
4mm Ziinc Composite Metal(ZCM) Wall Panel
4mm Ziinc Composite Metal(ZCM) Soffit Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET P1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
P2 Section - Fascia to Soffit
DET
PanelDimension
PanelDimension
Pan
elD
imen
sion
Pan
elD
imen
sion
12"
12"
WRB not by NorthClad
4mm Ziinc Composite Metal(ZCM) Wall Panel
14" x 1" Weep Holes 16" O.C.
See A/DET for Typical SystemCall Outs
Shop Fabricated Corner,Assembled with FormedReinforcement Corner at Timeof Installation using StructuralSealant
4mm Ziinc Composite Metal(ZCM) Soffit Panel
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET P2
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved
Q1 Section - Soffit at Top of Wall
DET
PanelDimension
Pan
elD
imen
sion
12"
WRB not by NorthClad
14" x 1" Weep Holes 16" O.C.
4mm Ziinc Composite Metal (ZCM) Soffit Pa
See B/DET For Typical System Call Outs
112"
12"
Pan
elD
imen
sion
4mm Ziinc Composite Metal (ZCM) Wall Pa
NorthClad ZCMPanel Standard
Details
M E04/07/2014Design
Last Saved By: eversm on 6/16/2015 C:\Users\eversm\Desktop\ZCM\Details.dwg
3" = 1'-0"
Project Sheet Title
Scale
Job Number
Sheet
DET
DET Q1
1
2
3
4
5
6
7
8
9
10
DESCRIPTIONNO. DATE INIT.
APPROVED
11831 BEVERLY PARK RD. BUILDING C, EVERETT, WA 98204 * PHONE: 425.740.3702 * FAX: 425.740.3701 *
www.northclad.com
This document is property of NorthClad and should not be used, duplicated or modifiedwithout the express written consent. Copyright © 2010
NorthClad All Rights Reserved