V 04-19 CYTOLOGY SOLUTIONS ADVANCED CENTRIFUGES DOMEL, d.o.o., Otoki 21, 4228 Železniki BU Laboratory Systems, Na Plavžu 79, 4228 Železniki Phone: +386 4 5117 525 E-mail: [email protected]WEB: http://labs.domel.com DOMEL LABS MAIN FEATURES > Adjusted for use in cytology, urology, microbiology, virology, oncology > Wide range of consumables for different applications > Centrifugation of up to 12 samples > Robust design > Microprocessor controlled functions of cover, time and speed > Adjustable acceleration and braking system > Special START - STOP features > FAST SPIN function > Possibility of programming CYTO CENTRIFUGE CENTRIC 250 Code 472.000 CENTRIC 350 Code 473.000 No. of places in rotor 8 12 Max. speed (RPM) 2.500 2.500 Brushless motor YES YES Noise level (dBA) 48 49 ACCESSORIES FOR CytoCENTRIC CENTRIFUGES ROTOCLIPS STAINLESS STEEL JC 390 ID 312491 ROTOFUNELL CHAMBERS JC 406 ID 312488 FILTER CARDS JC 407 ID 309097 SLIDES JC 311 ID 303369 ECOfunnel ® Reusable JC 313 ID 334724 ECOseal JC 315 ID 334729 ECOslides JC 314 ID 334733 4 pcs in a pack 4 pcs in a pack 200 pcs in a pack 100 pcs in a pack 4 pcs in a pack 100 pcs in a pack 100 pcs in a pack For sample volumes of up to 0.5ml Sedimentation field with a diameter of 6mm For preparing large-volume samples of up to 6ml Sedimentation field of 22x15mm for a higher cell yield Only for rotor with 12 places We reserve the right to alter specification details etc. without prior notice or liability! V:11-19
MAIN FEATURES > Adjusted for use in cytology, urology, microbiology, virology, oncology > Wide range of consumables for different applications > Centrifugation of up to 12 samples > Robust design > Microprocessor controlled functions of cover, time and speed > Adjustable acceleration and braking system > Special START - STOP features > FAST SPIN function > Possibility of programming
CYTO CENTRIFUGE
CENTRIC 250
Code 472.000
CENTRIC 350
Code 473.000
No. of places in rotor
8 12
Max. speed (RPM)
2.500 2.500
Brushless motor YES YES
Noise level (dBA)
48 49
ACCESSORIES FOR CytoCENTRIC CENTRIFUGES
ROTOCLIPS STAINLESS STEEL
JC 390
ID 312491
ROTOFUNELL CHAMBERS
JC 406
ID 312488
FILTER CARDS JC 407
ID 309097
SLIDES JC 311
ID 303369
ECOfunnel® Reusable
JC 313
ID 334724
ECOseal JC 315
ID 334729
ECOslides JC 314
ID 334733
4 pcs in a pack 4 pcs in a pack 200 pcs in a pack 100 pcs in a pack 4 pcs in a pack 100 pcs in a pack 100 pcs in a pack
For sample volumes of up to 0.5ml Sedimentation field with a diameter of 6mm
For preparing large-volume samples of up to 6ml Sedimentation field of 22x15mm for a higher cell yield
Only for rotor with 12 places
We reserve the right to alter specification details etc. without prior notice or liability! V:11-19
> Solid metal housing > Lid Locking System – SAFE TO USE > Variable Speed with Closed Loop Regulation > Electronic Timer with HOLD function > Microprocessor Controlled Functions of Cover, Time and Speed > Automatic Rotor Recognition and Speed Limitation System > Adjustable Acceleration and Braking System
Centrifuge CENTRIC 150 is a compact, digital bench-top centrifuge with many additional benefits including an active lid cooling system and silent operation, all at a most-effective price. Centrifuges functions are controlled by microprocessor which supervises all its safety protection features such as the displayed imbalance cut-out and lid locking system. It also provides system diagnosis features, automatic rotor recognition and speed limitation, braking and acceleration, intensity, momentary run. Even regula-tion from the control computer is possible. Thanks to wide speed range the CENTRIC 150 can be used not only for simple applications like standard urine and blood separation but also for high speed centrifugation of small samples in tubes ranging from 0.25 to 2.0 ml. With an additional rotor even 15 ml tubes can be used. The CENTRIC 150 is the ideal and affordable choice of centrifuge for daily routine operations in the laboratory. It provides more now to cope with increased demands in the future, all these without the need for additional expense at the later date.
TECHNICAL SPECIFICATIONS
Model CENTRIC 150
Code for 230V 115V
455.000 1455.000
Power supply 230V / 50-60Hz 115V / 50-60Hz
Power requirement 400W
Fuses 2x5A T - 230V 2x10A T - 115V
Max. rotation speed 500 to 13.000 rpm
Rotating speed adjustment In steps of 100 rpm
Time 0,1 - 60 min, (in steps of 0,1min ), HOLD function
Acceleration 0 - 9 levels
Deceleration 0 - 9 levels
Permitted ambient temperature + 2°C to + 40°C
Permitted max. relative air humidity 85%
Dimensions (H x W x D) 275 x 330 x 240 mm
Weight 14,5kg
DOMEL LABS
We reserve the right to alter specification details etc. without prior notice or liability! V:11-19
V 0
4-1
9 DOMEL, d.o.o., Otoki 21, 4228 Železniki
BU Laboratory Systems, Na Plavžu 79, 4228 Železniki Phone: +386 4 5117 525 E-mail: [email protected] WEB: http://labs.domel.com
DOMEL LABS
CENTRIC 150 ACCESSORIES
UNIVERSAL ANGLE ROTORS Various angle rotors can accept up to 12 tubes arranged in one concentric row. Tubes are placed in angle of 55°. Have in mind that the outer row has greater RCF.
Angle rotor RA 8/15 - Tube capacity: 5 - 15 ml - Max. tube dimensions: 16 x 120 ɸ x mm - Max. speed: 5000 rpm - Max. centrifugal force: 2800 xG Ordering Code: 455.250
HIGH SPEED ROTORS Angle rotor can accept up to 24 tubes arranged in one or two concentric rows. Tubes are placed in angle of 45°. Have in mind that the outer row has greater RCF.
Angle rotor RA 12/12 - Tube capacity: 5 -15 ml - Max. tube dimensions: 16 x 120 ɸ x mm - Max. speed: 5000 rpm - Max. centrifugal force: 2800 xG Ordering Code: 455.260
Angle rotor RA 24M - Tube capacity: 0,25 / 1,5 ml - Max. tube dimensions: 6 x 30 / 11 x 40 ɸ x mm - Max. speed: 13000 rpm - Max. centrifugal force: 12280 / 15120 xG Ordering Code: 456.140
SPECIAL APPLICATIONS ROTORS Hematokrit rotor can accept up to 24 glass tubes.
HEMATOKRIT ROTOR with reading device - Tube capacity: glas tube - Max. tube dimensions: 1,6 x 75 ɸ x mm - Max. speed: 13000 rpm - Max. centrifugal force: 17380 xG Ordering Code: 455.290
We reserve the right to alter specification details etc. without prior notice or liability! V:11-19
TECHNICAL DATA CENTRIC 250 / 250 IVD
Max. rotation speed 200 to 16.200 rpm, in steps of 10 rpm
Max. centrifugal force 25.200 x g
Time 0 - 99 min, HOLD function
Programs 100
Acceleration & Deceleration 0 - 9 (10) levels
Noise level (at max. speed) < 62 dB(A)
Fast spin with preselected speed YES
Dimensions (W x D x H) 250 x 300 x 415 mm
Weight 18 kg
CENTRIC 250 / CENTRIC 250 IVD is universal laboratory centrifuge, designed for use in medical, industrial and scientific laboratories for separating substances with different relative densities by centrifugal force. The maximum rotational speed of 16.200 RPM gives the centrifugal force of 25.200 x g. A wide usage of programming options and an electronic operation control allow a trouble-free use of the centrifuge. With a special drive, quiet maintenance-free operation without any carbon dust pollution is guaranteed. Device is equipped with user-friendly options, which make the operation and standard settings easier for you. Built-in error-detecting functions keep the user from entering incorrect values and check the complete operation. The centrifuge has the possibility to save programs. In the program store you can save up to 100 different data sets. The centrifuge always keeps the last run program in its memory for an unlimited amount of time allowing the program to be restarted at any time - even if the centrifuge was turned off during operation. All important operation parameters can be seen at a glance. The settings are executed with knobs and keys on the control panel. The interior of the centrifuge is also easy to clean. We are able to offer you a device that combines functional variety with practical applications.
MAIN FEATURES > USER adjustable START - STOP Features > Robust Design, QUIET RUNNING > Brushless Drive System, MAINTENANCE FREE > SAFE TO USE, Speed Limitation System, Automatic Rotor Recognition System > Microprocessor Controlled Functions Lid Locking, Cover opening, Time, and Speed > Adjustable Acceleration and Braking System > Fast Spin > Up to 100 Programs
V 0
4-1
9 DOMEL, d.o.o., Otoki 21, 4228 Železniki
BU Laboratory Systems, Na Plavžu 79, 4228 Železniki Phone: +386 4 5117 525 E-mail: [email protected] WEB: http://labs.domel.com
DOMEL LABS
CENTRIC 250 / 250 IVD ACCESSORIES
Six Place Swing-Out rotor with buckets - 6 x 12 ml - Max. tube dimensions: ɸ17 x 105 mm - Max. speed: 4400 rpm - Max. centrifugal force: 2160 x g Ordering Code: 472.350
SWING OUT ROTORS:
Angle rotor with AEROSOL-TIGHT lid - 24 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 16200 rpm - Max. centrifugal force: 25200 x g Ordering Code: 473.400
ANGLE ROTORS:
Angle rotor with lid - 24 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 16200 rpm - Max. centrifugal force: 25200 x g Ordering Code: 456.600
Angle rotor - 6 x 50 ml conical - Max. tube dimensions: ɸ29 x 120 mm - Max. speed: 6000 rpm - Max. centrifugal force: 3620 x g Ordering Code: 472.330 + shields 472.806
We reserve the right to alter specification details etc. without prior notice or liability! V:11-19
Angle rotor - 8 x 15 ml, optional adapters for 5 ml, 7ml and 10ml tubes - Max. tube dimensions: ɸ17 x 120 mm - Max. speed: 6000 rpm - Max. centrifugal force: 4020 x g Ordering Code: 472.920 + shields 455.256
Angle rotor - 12 x 12 ml, 6 x 15 ml, optional adapters for 5 ml, 7ml and 10ml tubes - Max. tube dimensions: ɸ17 x 120 mm - Max. speed: 6000 rpm - Max. centrifugal force: 4020 x g Ordering Code: 472.320 + shields 455.266
Angle rotor with AEROSOL-TIGHT lid - 16 x 5,0 ml - Max. tube dimensions: ɸ17 x 54 mm - Max. speed: 14000 rpm - Max. centrifugal force: 21450 x g Ordering Code: 472.890
Angle rotor with lid - 30 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 14000 rpm - Max. centrifugal force: 21450 x g Ordering Code: 456.620
SPECIAL APPLICATIONS ROTORS:
Angle PCR rotor - 6 x 8 PCR strip - Max. tube dimensions: ɸ9 x 22 mm - Max. speed: 14000 rpm - Max. centrifugal force: 19500 x g Ordering Code: 457.380
Hematocrit rotor - 24 x glass hematocrit capilares - Max. capilares dimensions: ɸ1,6 x 75 mm - Max. speed: 14000 rpm - Max. centrifugal force: 20160 x g Ordering Code: 456.630
Cytology rotor - 8 x Cyto funnels - Max. funnel volume: 6 ml - Max. speed: 2500 rpm - Max. centrifugal force: 630 x g Ordering Code: 472.370
TECHNICAL DATA CENTRIC 350, 350 IVD
Max. rotation speed 200 to 15.000 rpm, in steps of 10 rpm
MAIN ADVANTAGES: > Robust Design, QUIET RUNNING > Brushless Drive System, MAINTENANCE FREE > Automatic Rotor Recognition System, SAFE TO USE > Speed Limitation System, SAFE TO USE > Microprocessor Controlled Functions of Cover, Time and Speed > Adjustable Accelaration and Braking System > Special START - STOP Features > Fast Spin Features > Up to 100 Programs
Centrifuge CENTRIC 350 / CENTRIC 350 IVD is universal laboratory centrifuge, designed for use in medical, industrial and scientific laboratories for separating substances with different relative densities by centrifugal force.
The maximum rotational speed of 15.000 RPM gives the centrifugal force of 21.630 x g. A wide usage of programming options and an electronic operation control allow a trouble-free use of the centrifuge.
With a special drive, quiet maintenance-free operation without any carbon dust pollution is guaranteed.
Device is equipped with user-friendly options which make the operation and standard settings easier for you. Built-in error detecting functions keep the user from entering incorrect values and check the complete operation.
The centrifuge has the possibility to save programs. In the program store you can save up to 100 different data sets. The centrifuge always keeps the last run program in its memory for an unlimited amount of time allowing the program to be restarted at any time - even if the centrifuge was turned off during operation. All important operation parameters can be seen at a glance. The settings are executed with knobs and keys on the control panel. The interior of the centrifuge is also easy to clean. We are able to offer you a device that combines functional variety with practical applications.
ORDERING INFORMATION
CENTRIC 350, without rotor
230V / 50 - 60 Hz 473.000
CENTRIC 350 without rotor
115V / 50 - 60 Hz 1473.000
CENTRIC 350 IVD, without rotor
230V / 50 - 60 Hz 473.000 IVD
CENTRIC 350 IVD, without rotor
115V / 50 - 60 Hz 1473.000 IVD
V 0
4-1
9 DOMEL, d.o.o., Otoki 21, 4228 Železniki
BU Laboratory Systems, Na Plavžu 79, 4228 Železniki Phone: +386 4 5117 525 E-mail: [email protected] WEB: http://labs.domel.com
DOMEL LABS
CENTRIC 350 / 350 IVD ACCESSORIES
Four Place Swing-Out rotor with buckets - 4 x 100 ml - Max. tube dimensions: ɸ44 x 100 mm - Max. speed: 4400 rpm - Max. centrifugal force: 3260 xG Ordering Code: 457.200 +
buckets 462.200 / XL buckets 473.301
SWING OUT ROTORS:
Two place Swing-Out rotor for MT plates with plate carriers - 6 x MTP - Max. plate dimensions: 86 x 128 mm - Max. speed: 3000 rpm - Max. centrifugal force: 1320 xG Ordering Code: 457.340 + carriers 464.310
Six Place Swing-Out rotor with buckets - 4 x 200 ml - Max. tube dimensions: ɸ57 x 105 mm - Max. speed: 4400 rpm - Max. centrifugal force: 3260 xG Ordering Code: 473.380 + buckets 473.380
Angle rotor with AEROSOL-TIGHT lid - 24 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 15000 rpm - Max. centrifugal force: 21630 xG Ordering Code: 473.400
ANGLE ROTORS:
Angle rotor with lid - 24 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 15000 rpm - Max. centrifugal force: 21630 xG Ordering Code: 456.600
Angle rotor with AEROSOL-TIGHT lid - 16 x 5,0 ml - Max. tube dimensions: ɸ17 x 54 mm - Max. speed: 13000 rpm - Max. centrifugal force: 18510 xG Ordering Code: 472.890
Angle rotor with lid - 30 x 1,5/2,0 ml, optional adapters for PCR tubes - Max. tube dimensions: ɸ11 x 40 mm - Max. speed: 13000 rpm - Max. centrifugal force: 18510 xG Ordering Code: 456.620
Angle rotor - 30 x 15 ml, optional adapters for 5 ml, 7ml and 10ml tubes - Max. tube dimensions: ɸ17 x 120 mm - Max. speed: 4400 rpm - Max. centrifugal force: 3130 xG
