Combine soft lighting and water resilient properties of BBM series luminaries, to expand your lighting designs.
800W/1000W
O LED
√Cree XLamp XT-E LED, 140lm/w, CRI >Ra80. Junction temperature <70°C
√MeanWell LED Drivers, wide AC90V~305V (400V), PF>0.98, low THD<9%
√Ultra-thin modular heat dissipation guarantees long lifetime up to 62,000+ hours
√ Light transmittance up to 98%. Asymmetric and symmetrical beam angles of 30°/ 60°/ 90°/ 60*135°/ 85*135°
√ New design on appearance. Simple installation, easy disassembly. Wide range of application
√ High strength 6063-T5 aluminum alloy. Outdoor powder spraying and Uv protection materials coated
√ Secondary optics design, anti-glar. Low UGR<20. √ Switch/DMX512/DALI/0-10V and Zigbee dimming models are available √ CE RoHS CB SAA C-Tick ETL and IK10 approved, 5 years warranty √ Suitable for sports field, stadiums, port, warehouse, industrial area, etc
30x30° 60x60° 60x135° 85x135°
PHOTOMETRICS
EASY ACCESS DRIVER HOUSING
TEMPERED
GLASS
RGBW INFINITE COLOR RANGE
ADJUSTABLE
±270°
EXPECTED LIFE
OVER 100,000 HRS
AVAILABLE FROM 800W
UP TO 1000WFIVE OPTICS NATATORIUM RATED
CONSTRUCTION
Corrosive resistant powder coated finish
Stainless steel hardware
Chlorine resistant treated gasket
PATENTED THERMAL MANAGEMENT
The proprietary patented thermal management
design, ensures low LED junction temperature
while maintaining its extremely light weight.
It has become the go-to series of engineers and
specifiers for exterior and interior use
716 8
1433 7
2150 5
2867 3
2
1
367 5
735 1
1102 6
1470 1
2
1
258 1
516 1
774 2
1032 3
1
2
199 7
399 5
599 2
799 0
1
2
LUMINAIRE RATED IP 65LIGHT ENGINE RATED IP66
REVIT & IES FILESAVAILABLE
www.bbmledproducts.com
Advanced LED Technology and proprietary optics that distribute the light to the target area in a prescribed manner. This creates sites with incredible uniformity and visual comfort while requiring fewer lumens
30x30° 60x60° 90x90° 60x135° 85x135°
Symmetrical Asymmetrical
Photometric Distribution
15x15° 30x30° 40x40°
85x135°
Various Mountings
Installation Instructions
1. Take out the lamp from packing box.2. Fix the light on mounting frame and keep stable placement. For safety, make sure the power cables are connected by bb 2electricians. The power cord is 1.0MM triple shield wire, the brown is live wire, blue is neutral wire, and yellow/green is earth wire.
Maintenance / Repairing Instructions:
1. Make sure the power has been turned off before maintenance or repairing.2. Clean the glass cover regularly to maintain high transmission of light. 3. Clean up the dust from the glass cover and heat-sink regularly to keep sound heat dispersion. 4. Be careful not to use water or corrosive solution for cleaning, preferably with a dry cloth.5. When install or replace power supply, directly open the back cover with a screwdriver, then remove the power supply. 6.On DC power output, the red cable corresponds to the positive power polarity, and black corresponds to the negative. [[[Pay attention do not reverse the positive and the negative in any circumstance.
60x135°60x60°
DIMMING
DMX512 Decoder
Wifi Controller Motion sensor
BBM HL-800
DIMENSIONS
RGBW:Wired Controller
RGB\W:Wireless Controllers
RGBW
TILT MOUNTING BRACKET
STANDARD YOKE MOUNTING WITH ADJUSTABLE PIVOT LIMITS
347-480V(OPTIONAL)
OPTIONAL EQUIPMENTS
SPECIFICATIONS:
Input Voltage: AC90-305V, 50-60Hz
LED Brand: Cree XLamp XT-E
Lighting Efficiency: 140lm/w
Color Rendering Index: >Ra80
Color Temperature: 2200K-6500K
Power Factor: >0.95
LED Junction Temperature: ≤69℃(@Ta=30℃)
Working Temperature: -40℃~45℃
Expected life: over 100,000Hrs
Rating: Ip65
Power Cable: 1.0mm2 triple shield wire
MISC SPECS
Dimmable: 0- 10V (optional)Occupancy sensor: (optional)Natatorium Rated (optional)
MATERIALS
LED CHIP: Cree XLamp XT-E
Housings: Die cast aluminumHeat sink: Double folded aluminum finsLens: Tempered glassDriver: UL approved MeanwellGasket: Neoprene
PACKAGING INFO
N.W.: 35.0G.W.: 39.0KgCarton Dimension: 809x752x245mmQty/Ctn: 1 Unit
DIMMING
DMX512 Decoder
Wifi Controller Motion sensor
BBM HL-1000
DIMENSIONS
RGBW:Wired Controller
RGB\W:Wireless Controllers
RGBW
TILT MOUNTING BRACKET
STANDARD YOKE MOUNTING WITH ADJUSTABLE PIVOT LIMITS
347-480V(OPTIONAL)
OPTIONAL EQUIPMENTS
SPECIFICATIONS:
Input Voltage: AC90-305V, 50-60Hz
LED Brand: Cree XLamp XT-E
Lighting Efficiency: 140lm/w
Color Rendering Index: >Ra80
Color Temperature: 2200K-6500K
Power Factor: >0.95
LED Junction Temperature: ≤69℃(@Ta=30℃)
Working Temperature: -40℃~45℃
Expected life: over 100,000Hrs
Rating: Ip65
Power Cable: 1.0mm2 triple shield wire
MISC SPECS
Dimmable: 0- 10V (optional)Occupancy sensor: (optional)Natatorium Rated (optional)
MATERIALS
LED CHIP: Cree XLamp XT-E
Housings: Die cast aluminumHeat sink: Double folded aluminum finsLens: Tempered glassDriver: UL approved MeanwellGasket: Neoprene
PACKAGING INFO
N.W.: 36.0G.W.: 40.0KgCarton Dimension: 849x752x245mmQty/Ctn: 1 Unit
PROJECTSSuitable for sports field, stadiums, port, warehouse, industrial area, etc