Davidson’s
Capability Statement
Electrical
About usDavidson’s Electrical is a locally owned company which was established in 1967. In 1999 we relocated to the Parkhurst Industrial Estate at 5 Featherstone Street, North Rockhampton and recently underwent expansion to our premises to facilitate the growing needs of our customers.
We have been servicing the Mining, Agricultural, Process and Supply industry for over 40 years, with owners Mark, Jim and Darren having a combined industry experience and knowledge in excess of 80 years.
Along with our standard line of work with electric motors, generators, welder, pumps, power tools etc. our workshop is NATA Certified which allows us to service and repair motors for hazardous atmospheres (Exd, Exe, Exn). We are equipped to handle shutdowns and emergency breakdowns with a 24 hour service to reduce costly ‘down time’ and loss of production.
Our ServicesRepairs and Testing
Rewind, repair and overhaul > Electric Motors
> Submersible pumps
> Water pumps – from domestic and pool pumps through to industrial and agricultural
> Hazardous area motors (Exd, Exe, Exn)
> Generators.
> Welders
Insulation resistance testing up to 10KV
DC Hipot testing
Supply voltage up to 1000v for test running
Motor modifications
Motor protection
Mechanical repairs > Housings
> Shafts
> Motor frames
Motor redesign > Increased performance
> Speed change
> Voltage and frequency change
Sand blasting
Two and single pack paint
Sales of Motors, Generators, Submersible Pumps and Power ToolsBrands including but not limited to:
> Weg
> CMG
> Teco
> Toshiba
> SEW Eurodrive
> Genelite
> Mecc Alte
> Stamford
> Flygt
> ABS
> KSB Ajax
> Makita
> Hitachi
EquipmentAt Davidson’s Electrical we are equipped with: > Lifting capacity up to 4T
> Digitally controlled burn out oven, which eliminates the risk of core damage
> Varnishing and baking facilities
> Automatic coil winding machine with sleeve release, used to wind motor coils. This machine makes handling and insertion of coils in the stator easier reducing the risk of damage to the conductor insulation
> Paint spray booth
> Motor coil stripping facilities
> Pressure cleaning and wash bay facility with oil separator (environmentally friendly)
> Bearing extraction equipment and induction bearing heater
> Controlled and calibrated digital and mechanical measuring equipment
> Controlled and calibrated multimeters and meggers up to 1000v
> Insulation resistance testing up to 10kv
> Automatic digital motor tester
ProductsNew motor sales > Three Phase – Brands including but not
limited to: Weg, CMG, Toshiba, Teco, ABB
> Single Phase – Brands including but not limited to: Weg, CMG, Fasco, Teco
> Hazardous Area Motors – Brands including but not limited to: Weg, CMG, Toshiba
> Servo Motors
> Vacuum Motors
> Fan Motors
Switch Gear > DOL starters
> Soft starters
> Variable Speed Drives
> Star/Delta Starters
> Contactors and Overloads
> Push Buttons and Signaling
Pumps > Xylem Water Solutions Australia Limited
> Grindex
> Grundfos
> Davey
> Eaquip
> KSB Ajax
Parts > Capacitors
> Bearings
> Brushes
> Range of terminal blocks, terminal boxes and motor parts
> Cooling fans
> Slide rails
> Mechanical seals
Generators > Weg
> Stamford
> Mecc Alte
> Leroy Somer
> Markon
> Modra
Power Tools > Sales and service of all major brands
Certifications & MembershipsAccreditationDavidson’s Electrical has for many years been servicing the mining industry and is NATA certified as an accredited Type C Inspection Body for Exd – Flameproof Motors, Exe – Increased Safety Motors and Exn – Non-sparking Motors.
Accreditation Number 14828.
Recognized Service Facility Certificate No: ANZEx SF 12.5828
Quality AssuranceDavidson’s Electrical is accredited to AS/NZS ISO9001:2008.
Certification Number FS 605238.
Memberships > Members of EASA (Electrical
Apparatus Service Association) since 1993.
> Weg Authorised Service Centre.
> Chamber of Commerce and Industry Queensland.
Certificate of RegistrationQUALITY MANAGEMENT SYSTEM - ISO 9001:2008
This is to certify that: SPP Electrical Pty Ltd5 Featherstone StreetNORTH ROCKHAMPTON QLD 4701
Holds Certificate Number: FS 605238
and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for theaccompanying scope.
Repair, service and overhaul of electric motors and electric power tools and associated partsand equipment. Sales and supply of electric motors, power tools and parts. In-serviceinspection including overhaul and repair of standard and modified electrical.
For and on behalf of BSI:Nicholas Koukoulas, Managing Director, BSI Group ANZ
Originally registered: 16/04/2002 Latest Issue: 17/04/2014 Expiry Date: 30/04/2017
Page: 1 of 1
This certificate was issued electronically and remains the property of BSI Group ANZ Pty Limited, ACN 078 659 211 and is bound by the conditions of contract.This certificate can be verified at www.bsi-global.com/clientdirectory. Printed copies can be validated at www.bsi-global.com/ClientDirectory, or www.jas-anz.org/register or telephone + 61 2 9925 2700. Further clarifications regarding the scope of this certificate and the applicability of ISO 9001:2008 requirementsmay be obtained by consulting the organization. This certificate is valid only if provided original copies are in complete set.
Information and Contact: BSI Group ANZ Pty Limited, ACN 078 659 211: Suite 2, Level 7, 15 Talavera Road, Macquarie Park, NSW 2113A Member of the BSI Group of Companies.
Key Customers Anglo Coal
BMA Coal Operations
CC Pty Ltd
Ensham Resources
Jellinbah Mining
Rio Tinto Coal Australia
Sojitz Minerva Mining Pty Ltd
Wesfarmers Curragh
Xstrata Coal
Nepean Conveyors Pty Ltd
Austrak
Boral
LDC Ginning (Queensland)
Fitzroy River Water
Holcim Australia
Queensland Cotton Corp Ltd
Sibelco Australia
Rockhampton Regional Council
Stanwell Power Station
Teys Australia Rockhampton
Weir Minerals
Key SuppliersWeg Australia
Regal Beloit
Teco Australia
Toshiba
Xylem Water Solutions Australia Ltd
Mecc Alte
ABB
SEW-Eurodrive
Makita Australia
Hitachi Power Tools Australia
Metabo
Cummins South Pacific
Friedrich Schwingtechnik
Contact Us
Office5 Featherstone Street North Rockhampton Qld 4701
Phone 07 4936 1733 Fax 07 4936 1744
Mark Schneider 0438 604 756 [email protected]
Jim Paxton 0409 361 456 [email protected]
Darren Pill 0409 261 581 [email protected]
www.davidsonselectrical.com.au