DENOVO  LAB  LIMITED  ONLINE  DEMO  GUIDE  

Purpose  

The purpose of this document is to provide a basic understanding on how to configure the online demo to start routing traffic. This document does not serve as a complete user manual but rather as simple steps and guidelines for configuring the online demo switch to perform live switching, routing, and billing.

The User Manual of the system will be provided one MNDA and MSA has been signed.  

Purpose  

DEMO SWITCH

YOUR SWITCH IP: 2.3.4.5

Demo  Steps  

1.  Create  Ingress  Carrier  

2.  Create  Ingress  Trunk  

3.  Create  Egress  Carrier  

4.  Create  Egress  Trunk  

5.  Create  Sta7c  Route  

6.  Create  Rou7ng  Plan  

7.  Send  Traffic  

8.  Check  CDR  

Technical  Interoperability  

Web  UI   hGp://demo.denovolab.com  

User  Name   admin  

Password     gDJQfSyw209!!  

IP   173.205.112.248  

Preparation  

1. Register a new account 2. Create a new trunk in checkmyroutes.com

Login  Page  

Create  New  Carrier  

Click Create New

Create  New  Ingress  Carrier  

Click Submit When Done.

Add  Ingress  Trunk  

Click “Add Ingress Trunk”

Add  Ingress  Trunk  

Enter “CheckMyRoute.com” IP

Create  a  New  Ingress  (Sell)  Rate  

Add  Egress  Carrier  

Add  Egress  Trunk  

Click “Add EgressTrunk”

Add  Ingress  Trunk  

Enter “Your OWN Switch” IP

Create  a  New  Egress  (Buy)  Rate  

Create  a  Static  Route  

Create  a  New  Routing  Plan  

Create  a  New  Static  Route  

• Name your Static Route as “MY ROUTE” • Place your switch’s IP in this static route. • Use empty prefix means all DNIS will go to this trunk

Create  a  New  Routing  Plan  

• <prefix> is empty means all traffic will go to this Routing Rule. • For this rule, specific the Route Type as Static and select “MYROUTE” under “Static Routing”

Create  a  Routing  Plan  

Send  Test  Call  

Check  Active  Calls  

Check  Call  Result  

Check  Call  Detail  Records