1
COURSE DESCRIPTION: Learn the digital work flow of fabricating Clear Aligners in your office for drastically less than you are paying now. This is a turnkey approach to reduce the learning curve of in-office aligner fabrication for rapid integration. COURSE OUTLINE: Specifics you will learn: 1. How to create (digital) STL files from scanning models or intraoral scans 2. How to purchase the proper laptop and how to set it up 3. How to import STL files to your laptop 4. How to use the orthodontic software to create an aligner treatment plan 5. How to export STL files to a company that creates the orthodontic STL files for the treatment plan for aligner therapy 6. How to approve or modify the “clincheck” created 7. How to import STL files for the approved treatment plan 8. How to set up a FORM 2 printer 9. How to import and print the STL files on the FORM 2 10. How to process the printed models for the aligners 11. How to set up the pressure thermoforming equipment for creating the aligners 12. How to fabricate the aligners on the printed models 13. How to finish the aligners for delivery to the patient 14. How to create files and spreadsheets to keep track of the STL scans, treatment plans, STL’s of the ortho models, printed models, fabricated aligners, and delivering the aligners to the patient 15. How to promote aligners in your office 16. How to set your fees for various cases Earned a B.S. in Microbiology at The Ohio State University 1976 and his DDS in 1980 from The Ohio State University. Dr. Barry has also achieved fellowship status with the Academy of General Dentistry as well as in The International Congress of Oral Implantology. Richard Barry D.D.S., F.A.G.D., I.C.O.I. LIFETIME DENTAL EDUCATORS 1960 Bethel Road, Suite 240 • Columbus, Ohio 43220 www.lifetimedentaleducators.com Tel: 614-451-2234 • Fax: 614-451-1511 LIFETIME DENTAL EDUCATORS FABRICATION OF CLEAR ORTHODONTIC ALIGNERS IN OFFICE
