Date post: | 02-Jun-2015 |
Category: |
Marketing |
Upload: | dentrealmarket-anka-tibbi-malzemeleri |
View: | 402 times |
Download: | 0 times |
Legacy2
Legacy1 Legacy2
Legacy4Legacy3
LegacyLegacy™™ SystemSystemCatalogCatalog
Table of Contents
1-5
6-13
14-15
18
16-17
22
23
24
Page #
Labeling & Fixture-MountPackaging
Cover Screws, Healing Collars,Transfers & Analogs
Overdenture & Screw-ReceivingAbutment Ancillary Products
28-29
25-27
Surgical Tray
Selection Chart forLegacy Systems
Screw-Receiving, Ball & GPS Abutments
21Gold, Engaging &
Non-Engaging Abutments
19Straight Abutment &
Ancillary Components
Selection Chart for Overdenture& Screw-Retained Restorations
20Straight & AngledContoured, Titanium & Zirconia Abutments
Instruments, Surgical Drills& Surgical Sequence
Implant Design, Surface& Dimensions
Legacy1, Legacy2, Legacy3& Legacy4 Implants
The bodies of the Legacy1, Legacy2, Legacy3 and Legacy4 implants are tapered to facilitate insertion in an undersized socket(stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “AchievingSuccess in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Legacy system implants. Mini-threads start 1mm below the crest of the bone and extend for 2.0-2.5mm before transitioning into double-lead threads tothe apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to thedouble-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region whiledouble-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend up the implantfrom the apex for self-tapping insertion.
Mini-threads with Double-lead Threads for Faster Insertion
DoubleLead
Threads
QuadrupleLead Mini-
Threads
Implant Design & Surface
0.4mm
0.8mm
3.0 Deg.ID Taper
The 1.5o taper to the OD of the Legacy1, 2, 3 & 4 implants
facilitate soft bone expansion for increased stability.
All Legacy implants havemini-threads for reduced stress near the
crest of bone and double-lead threads onthe body for 2X faster insertion
Animal Studies Bone Response to SBM Surface
SBM Surface 50X
HA Surface 50X
SBM Surface 20X
HA Surface 20X
1
SEM's of Our SurfacesMini-threads textured by blasting with SBM: Blasted with Soluble HA ParticlesHA Coating: High Crystalline 40u layer
1.5 Deg. OD Taper
1.5 Deg. OD Taper
Buttress ThreadButtress ThreadStandard “V” Thread
0.3mm
0.6mm0.8mm
0.4mm
5.0 Deg.ID Taper
1.5 Deg.OD Taper
Legacy2 and Legacy4Implants
Legacy1 threads provide thesame 1.5o taper to the inside(ID) and outside thread (OD)diameters
SBM™ and HA Coated Surface OptionsSBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We usethe same vendor for SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when thesestudies were conducted.
Legacy2, 3 & 4 provide more threadengagement by tapering the inside threaddiameter (ID) at 3o & 5 o while the outside
thread diameter (OD) tapers at 1.5o
0.25mmL Bevel
2
Legacy1 Implant Dimensions
5.7mmD Body
5.7mmD Platform
5.7mmD Platform with a 3.0mmD Internal Hex
5.7mmD Legacy15.1mmD Apex Diameter
1.5mmHex Depth
Double-lead “V” Threads
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
HA
Length+ 0.25mm
4.7mmD Body
4.5mmD Platform
4.5mmD Platform witha 2.5mmD Internal Hex
4.7mmD Legacy14.1mmD Apex Diameter
Double-lead “V” Threads
2.0mmL ZoneMini-threads
Length+ 0.25mm
1.5mmHex Depth
HA SBM Texture
SBM Texture
1-72UNFInternal Thread
Taper startsat 1mm
Taper startsat 1mm
0.25mmL Bevel
4.2mmD Legacy13.6mmD Apex Diameter
Double-lead “V” Threads
1-72UNFInternal Thread
2.0mmL ZoneMini-threads
HA
3.7mmDBody
4.2mmDBody
3.5mmDPlatform
with a2.5mmDInternal
Hex
1.5mmHex Depth
0.25mmL Bevel
3.7mmD Legacy13.1mmD Apex Diameter
Double-lead “V” Threads
2.0mmL ZoneMini-threads
Length+ 0.25mm
SBM Texture
1-72UNFInternal Thread
HA
Taper startsat 1mm
Length+ 0.25mm
SBM Texture
Taper startsat 1mm
0.25mmL Bevel0.25mmL Bevel
0.25mmL Bevel
3
Legacy2 and Legacy4 Implant Dimensions
3.7mmD Legacy2 and Legacy43.1mmD Apex Diameter
4.7mmD Legacy2 and Legacy44.1mmD Apex Diameter
Double-lead Buttress Threads
1-72UNFInternal Thread
2.0mmL ZoneMini-threads
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
Length+ 0.25mm
SBM TextureHA
4.2mmD Legacy2 and Legacy43.6mmD Apex Diameter
Double-lead Buttress Threads
1-72UNFInternal Thread
2.0mmL ZoneMini-threads
Length+ 0.25mm
SBM TextureHA
Taper startsat 4.5mm
Taper startsat 4.5mm
Length+ 0.25mm
Taper startsat 4.5mm
1-72UNFInternal Thread
HASBM
Texture
3.2mmD Legacy2 and Legacy42.3mmD Apex Diameter
Double-lead Buttress Threads
1.6 UNMInternal Thread
2.0mmL ZoneMini-threads
3.0mmD Platform with aDouble Internal Hex
2.25mmD (upper) and 2.0mmD (lower)
Length+ 0.25mm
Taper startsat 3mm
HA SBM Texture
0.25mmL Bevel
0.25mmL Bevel
5.2mmD Legacy2 and Legacy4 4.6mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
Length+ 0.25mm
SBMTexture
HA
Taper startsat 3mm
3.2mmDBody
3.0mmDPlatform
0.6mmHex Depth
1.2mmHex Depth
4.7mmD Body
5.2mmD Body
4.5mmDPlatform with
a 2.5mmDInternal Hex
1.5mmHex Depth
3.7mmDBody
4.2mmDBody
3.5mmDPlatform
with a2.5mmDInternal
Hex
1.5mmHex Depth
4
3.2mmD Legacy32.6mmD Apex Diameter
Double-lead Buttress Threads
1.6 UNMInternal Thread
2.0mmL ZoneMini-threads
3.2mmDBody
3.0mmDPlatform
0.6mmHex Depth
Legacy2 and Legacy4 Implant Dimensions continued
3.0mmD Platform with aDouble Internal Hex
2.25mmD (upper) and 2.0mmD (lower)
Length+ 0.25mm
Taper startsat 1.25mm
HA
1.2mmHex Depth
SBM Texture
0.25mmL Bevel
HA
0.25mmL Bevel
5.7mmD Legacy2 and Legacy45.1mmD Apex Diameter
Double-lead Buttress Threads
1-72UNFInternal Thread
2.0mmL ZoneMini-threads
Length+ 0.25mm
5.7mmD Body
7.0mmD Body
1.5mmHex Depth
HA
7.0mmD Legacy2 and Legacy45.1mmD Apex Diameter
Taper startsat 4.3 mmTaper starts
at 4.5mm
SBM Texture SBM
Texture
Length+ 0.25mm
5.7mmD Platformwith a 3.0mmD
Internal Hex
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
Double-lead Buttress Threads
Legacy3 Implant Dimensions
0.25mmL Bevel0.25mmL Bevel
0.25mmL Bevel0.25mmL Bevel
5
4.2mmD Legacy33.6mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
3.7mmD Legacy33.1mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
3.7mmDBody
4.2mmDBody
3.5mmDPlatform
with a2.5mmDInternal
Hex
1-72UNFInternal Thread
Length+ 0.25mm Length
+ 0.25mm
HA
1.5mmHex Depth
4.7mmD Body
5.2mmD Body
Legacy3 Implant Dimensions continued
4.5mmDPlatform with
a 2.5mmDInternal Hex
5.7mmD Legacy35.1mmD Apex Diameter
4.7mmD Legacy34.1mmD Apex Diameter
5.2mmD Legacy34.6mmD Apex Diameter
Double-lead Buttress Threads
1-72UNFInternal Thread
2.0mmL ZoneMini-threads
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
Length+ 0.25mm
Length+ 0.25mm
1.5mmHex Depth
SBM Texture
SBM Texture
SBMTexture
SBM Texture
SBM Texture
Double-lead Buttress Threads
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
HA
HAHA
Taper startsat 1.25mm
Length+ 0.25mm
Taper startsat 1.25mm
1-72UNFInternal Thread
HA
Taper startsat 1.25mm
Taper startsat 1.25mm
Taper startsat 1.25mm
HA
0.25mmL Bevel5.7mmD Body
7.0mmD Body 1.5mmHex Depth
7.0mmD Legacy35.1mmD Apex Diameter
Taper startsat 3 mm
SBMTexture
Length+ 0.25mm
5.7mmDPlatform with
a 3.0mmDInternal Hex
2.0mmL ZoneMini-threads
1-72UNFInternal Thread
Double-lead Buttress Threads
• Internal connection with 1.5mm long hex & internal bevel
• Tapered body allows insertion using Tapered Screw-Vent®
drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill)
• Surface options: SBM (Soluble Blast Media) textured or HA-coated
• Double-lead “V” threads for 2X faster insertion & quadruple-lead threads near top for increased thread engagement & reduced stress
• 2mm extender retained by cover screw for use as a healing collar for one stage surgery
• Two self-tapping grooves, extending halfway up implant
3.5mmD Platform
4.5mmD Platform
Cover Screw
Legacy1 Implant System Features & Benefits
Placing Implant with Carrier
Suture soft tissuearound extender
Legacy1 Packaging
Carrier/Transfer
Color coded titanium carrier
Use indents on carrier to align implant hex
Attach cover screw andextender to implant
Extender
Legacy1
3.7mmDImplant
3.5mmDPlatform
4.2mmD Implant
4.7mmD Implant
5.7mmD Implant
5.7mmDPlatform
6
SBM Code Price HA Code Price Diameter Length Platform805708 $150.00 815708 $175.00 5.7mmD 8mmL 5.7mmD805710 $150.00 815710 $175.00 5.7mmD 10mmL 5.7mmD805711 $150.00 815711 $175.00 5.7mmD 11.5mmL 5.7mmD805713 $150.00 815713 $175.00 5.7mmD 13mmL 5.7mmD805716 $150.00 815716 $175.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform804708 $150.00 814708 $175.00 4.7mmD 8mmL 4.5mmD804710 $150.00 814710 $175.00 4.7mmD 10mmL 4.5mmD804711 $150.00 814711 $175.00 4.7mmD 11.5mmL 4.5mmD804713 $150.00 814713 $175.00 4.7mmD 13mmL 4.5mmD804716 $150.00 814716 $175.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform803708 $150.00 813708 $175.00 3.7mmD 8mmL 3.5mmD803710 $150.00 813710 $175.00 3.7mmD 10mmL 3.5mmD803711 $150.00 813711 $175.00 3.7mmD 11.5mmL 3.5mmD803713 $150.00 813713 $175.00 3.7mmD 13mmL 3.5mmD803716 $150.00 813716 $175.00 3.7mmD 16mmL 3.5mmD
Legacy1: Two-Piece Implant for Two-Stage Surgery
Legacy1
803708 803710 803713 803716
804708 804710 804713 804716
805708 805710 805713 805716
803711813708 813710 813713 813716813711
805711
804711814708 814710 814713 814716814711
815708 815710 815713 815716815711
7
SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer
3.7mmD
4.7mmD
5.7mmD
SBM Code Price HA Code Price Diameter Length Platform804208 $150.00 814208 $175.00 4.2mmD 8mmL 3.5mmD804210 $150.00 814210 $175.00 4.2mmD 10mmL 3.5mmD804211 $150.00 814211 $175.00 4.2mmD 11.5mmL 3.5mmD804213 $150.00 814213 $175.00 4.2mmD 13mmL 3.5mmD804216 $150.00 814216 $175.00 4.2mmD 16mmL 3.5mmD
804208 804210 804213 804216804211814208 814210 814213 814216814211
4.2mmD
3.5mmDPlatform
Legacy2 Implant System Features & Benefits
Legacy2 Packaging
Carrier/Transfer
Extender
Legacy2
3.7mmDImplant
5.7mmDImplant
5.7mmDPlatform
8
4.2mmDImplant
4.7mmDImplant
• Internal connection with 1.5mm long hex & internal lead-in bevel• Body is straight for top 1/3rd with bottom 2/3rds tapered for
bone expansion. Surgically compatible with Tapered Screw-Vent®
drills (except the 5.7mmD Implant uses 5.4/4.8mmD Step Drill)• Surface options: SBM (Soluble Blast Media) textured or HA-coated• Double-lead buttress threads for improved insertion &
quadruple-lead threads near top for increased thread engagement & reduced stress
• 2mm extender retained by cover screw for use as a healing collarfor one stage surgery
• Color-coded carrier usable as a closed-tray transfer & temporary abutment
• Three aggressive self-tapping grooves extending 2/3rds length up the implant
3.5mmDPlatform
4.5mmDPlatform
7.0mmDImplant
5.7mmDPlatform
Cover Screw
5.2mmDImplant
4.5mmDPlatform
3.0mmDPlatform
3.2mmDImplant
SBM Code Price HA Code Price Diameter Length Platform823208 $175.00 833208 $200.00 3.2mmD 8mmL 3.0mmD823210 $175.00 833210 $200.00 3.2mmD 10mmL 3.0mmD823211 $175.00 833211 $200.00 3.2mmD 11.5mmL 3.0mmD823213 $175.00 833213 $200.00 3.2mmD 13mmL 3.0mmD823216 $175.00 833216 $200.00 3.2mmD 16mmL 3.0mmD
9
SBM Code Price HA Code Price Diameter Length Platform825706 $175.00 835706 $200.00 5.7mmD 6mmL 5.7mmD825708 $175.00 835708 $200.00 5.7mmD 8mmL 5.7mmD825710 $175.00 835710 $200.00 5.7mmD 10mmL 5.7mmD825711 $175.00 835711 $200.00 5.7mmD 11.5mmL 5.7mmD825713 $175.00 835713 $200.00 5.7mmD 13mmL 5.7mmD825716 $175.00 835716 $200.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform824206 $175.00 834206 $200.00 4.2mmD 6mmL 3.5mmD824208 $175.00 834208 $200.00 4.2mmD 8mmL 3.5mmD824210 $175.00 834210 $200.00 4.2mmD 10mmL 3.5mmD824211 $175.00 834211 $200.00 4.2mmD 11.5mmL 3.5mmD824213 $175.00 834213 $200.00 4.2mmD 13mmL 3.5mmD824216 $175.00 834216 $200.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform824706 $175.00 834706 $200.00 4.7mmD 6mmL 4.5mmD824708 $175.00 834708 $200.00 4.7mmD 8mmL 4.5mmD824710 $175.00 834710 $200.00 4.7mmD 10mmL 4.5mmD824711 $175.00 834711 $200.00 4.7mmD 11.5mmL 4.5mmD824713 $175.00 834713 $200.00 4.7mmD 13mmL 4.5mmD824716 $175.00 834716 $200.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform823706 $175.00 833706 $200.00 3.7mmD 6mmL 3.5mmD823708 $175.00 833708 $200.00 3.7mmD 8mmL 3.5mmD823710 $175.00 833710 $200.00 3.7mmD 10mmL 3.5mmD823711 $175.00 833711 $200.00 3.7mmD 11.5mmL 3.5mmD823713 $175.00 833713 $200.00 3.7mmD 13mmL 3.5mmD823716 $175.00 833716 $200.00 3.7mmD 16mmL 3.5mmD
824208 824210 824213 824216824211
Legacy2: Two-Piece Implant for Two-Stage Surgery
825708 825710 825713 825716825711
Legacy2SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
824708 824710 824713 824716824711
834208824206834206 834210 834213 834216834211
834708824706834706 834710 834713 834716834711
835708825706835706 835710 835713 835716835711
SBM Code Price HA Code Price Diameter Length Platform827006 $175.00 837006 $200.00 7.0mmD 6mmL 5.7mmD827008 $175.00 837008 $200.00 7.0mmD 8mmL 5.7mmD827010 $175.00 837010 $200.00 7.0mmD 10mmL 5.7mmD827011 $175.00 837011 $200.00 7.0mmD 11.5mmL 5.7mmD827013 $175.00 837013 $200.00 7.0mmD 13mmL 5.7mmD
827008 827010 827013827011837008 837010 837013837011
3.7mmD
4.2mmD
4.7mmD
5.7mmD
7.0mmD
SBM Code Price HA Code Price Diameter Length Platform825206 $175.00 835206 $200.00 5.2mmD 6mmL 4.5mmD825208 $175.00 835208 $200.00 5.2mmD 8mmL 4.5mmD825210 $175.00 835210 $200.00 5.2mmD 10mmL 4.5mmD825211 $175.00 835211 $200.00 5.2mmD 11.5mmL 4.5mmD825213 $175.00 835213 $200.00 5.2mmD 13mmL 4.5mmD825216 $175.00 835216 $200.00 5.2mmD 16mmL 4.5mmD
825208 825210 825213 825216825211835208 835210 835213 835216835211
5.2mmD
823208 823210 823213 823216823211
3.2mmD
833208 833210 833213 833216833211
823708 823710 823713 823716823711833708
823706833706 833710 833713 833716833711
825206835206
827006837006
Cover Screw
Legacy3 Packaging
Carrier/Transfer
Extender
• Internal connection with 1.5mm long hex & internal lead-in bevel
• Tapered body allows insertion using Tapered Screw-Vent®
drills for 3.7mmD, 4.2mmD & 4.7mmD implants only• Surface options: SBM (Soluble Blast Media) textured or
HA-coated• Double-lead buttress threads for improved insertion &
initial stability, quadruple-lead threads near top for increased thread engagement & reduced stress
• 2mm extender retained by cover screw for use as a healing collar or for one or two-stage surgery
• Color-coded carrier usable as a closed-tray transfer and/or final full-contour abutment
• Two self-tapping grooves, extending halfway up implant
Legacy3
3.0mmDPlatform
3.2mmDImplant
4.7mmDImplant
4.5mmDPlatform
3.7mmDImplant
4.2mmDImplant
3.5mmDPlatform
3.5mmDPlatform
5.7mmDImplant
5.7mmDPlatform
5.2mmDImplant
4.5mmD Platform
Legacy3 Implant System Features & Benefits
10
7.0mmDImplant
5.7mmDPlatform
SBM Code Price HA Code Price Diameter Length Platform855706 $200.00 865706 $225.00 5.7mmD 6mmL 5.7mmD855708 $200.00 865708 $225.00 5.7mmD 8mmL 5.7mmD855710 $200.00 865710 $225.00 5.7mmD 10mmL 5.7mmD855711 $200.00 865711 $225.00 5.7mmD 11.5mmL 5.7mmD855713 $200.00 865713 $225.00 5.7mmD 13mmL 5.7mmD855716 $200.00 865716 $225.00 5.7mmD 16mmL 5.7mmD
855708865708
855706865706
855710865710
855713865713
855716865716
855711865711
SBM Code Price HA Code Price Diameter Length Platform854206 $200.00 864206 $225.00 4.2mmD 6mmL 3.5mmD854208 $200.00 864208 $225.00 4.2mmD 8mmL 3.5mmD854210 $200.00 864210 $225.00 4.2mmD 10mmL 3.5mmD854211 $200.00 864211 $225.00 4.2mmD 11.5mmL 3.5mmD854213 $200.00 864213 $225.00 4.2mmD 13mmL 3.5mmD854216 $200.00 864216 $225.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform855206 $200.00 865206 $225.00 5.2mmD 6mmL 4.5mmD855208 $200.00 865208 $225.00 5.2mmD 8mmL 4.5mmD855210 $200.00 865210 $225.00 5.2mmD 10mmL 4.5mmD855211 $200.00 865211 $225.00 5.2mmD 11.5mmL 4.5mmD855213 $200.00 865213 $225.00 5.2mmD 13mmL 4.5mmD855216 $200.00 865216 $225.00 5.2mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform854706 $200.00 864706 $225.00 4.7mmD 6mmL 4.5mmD854708 $200.00 864708 $225.00 4.7mmD 8mmL 4.5mmD854710 $200.00 864710 $225.00 4.7mmD 10mmL 4.5mmD854711 $200.00 864711 $225.00 4.7mmD 11.5mmL 4.5mmD854713 $200.00 864713 $225.00 4.7mmD 13mmL 4.5mmD854716 $200.00 864716 $225.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform853706 $200.00 863706 $225.00 3.7mmD 6mmL 3.5mmD853708 $200.00 863708 $225.00 3.7mmD 8mmL 3.5mmD853710 $200.00 863710 $225.00 3.7mmD 10mmL 3.5mmD853711 $200.00 863711 $225.00 3.7mmD 11.5mmL 3.5mmD853713 $200.00 863713 $225.00 3.7mmD 13mmL 3.5mmD853716 $200.00 863716 $225.00 3.7mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform853208 $200.00 863208 $225.00 3.2mmD 8mmL 3.0mmD853210 $200.00 863210 $225.00 3.2mmD 10mmL 3.0mmD853211 $200.00 863211 $225.00 3.2mmD 11.5mmL 3.0mmD853213 $200.00 863213 $225.00 3.2mmD 13mmL 3.0mmD853216 $200.00 863216 $225.00 3.2mmD 16mmL 3.0mmD
Legacy3: Two-Piece Implant for Two-Stage Surgery
Legacy3
855208865208
855206865206
855210865210
855213865213
855216865216
855211865211
854708864708
854706864706
854710864710
854713864713
854716864716
854711864711
854208864208
854206864206
854210864210
854213864213
854216864216
854211864211
853706863706
853708863708
853710863710
853713863713
853716863716
853711863711
853208863208
853210863210
853213863213
853216863216
853211863211
SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
SBM Code Price HA Code Price Diameter Length Platform857006 $200.00 867006 $225.00 7.0mmD 6mmL 5.7mmD857008 $200.00 867008 $225.00 7.0mmD 8mmL 5.7mmD857010 $200.00 867010 $225.00 7.0mmD 10mmL 5.7mmD857011 $200.00 867011 $225.00 7.0mmD 11.5mmL 5.7mmD857013 $200.00 867013 $225.00 7.0mmD 13mmL 5.7mmD
857008867008
857006867006
857010867010
857013867013
857011867011
11
3.7mmD
4.2mmD
4.7mmD
5.7mmD
7.0mmD
5.2mmD
3.2mmD
3.5mmDPlatform
Legacy4 Implant System Features & Benefits
Legacy4 Packaging
Carrier/Transfer
3.5mmDPlatform873713
13mmLength
Extender
Legacy4
3.7mmDImplant
5.7mmDImplant
5.7mmDPlatform
12
4.2mmDImplant
4.7mmDImplant
3.5mmDPlatform
4.5mmDPlatform
7.0mmDImplant
5.7mmDPlatform
Cover Screw
5.2mmDImplant
4.5mmDPlatform
3.0mmDPlatform
3.2mmDImplant
• Revolutionary new, two-piece fixture-mount. Top includes torque-safety feature and detaches in impression for metal-to-metal transfer accuracy
• Fixture-mount may be shortened at the line to function as a final preparable abutment
• 2mm extender retained by cover screw for use as a healing collar for one-stage surgery features a concave transgingival profile which matches the fixture-mount
• Internal connection with 1.5mm long hex & internal lead-in bevel• Body is straight for top 1/3rd with bottom 2/3rds tapered for
bone expansion. Surgically-compatible with Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill)
• Double-lead buttress threads for improved insertion and quadruple-lead threads near top for increased thread engagement & reduced stress
• Surface options: SBM (Soluble Blast Media) textured or HA-coated• Three aggressive self-tapping grooves extend 2/3rds length up
the implant
SBM Code Price HA Code Price Diameter Length Platform873208 $225.00 883208 $250.00 3.2mmD 8mmL 3.0mmD873210 $225.00 883210 $250.00 3.2mmD 10mmL 3.0mmD873211 $225.00 883211 $250.00 3.2mmD 11.5mmL 3.0mmD873213 $225.00 883213 $250.00 3.2mmD 13mmL 3.0mmD873216 $225.00 883216 $250.00 3.2mmD 16mmL 3.0mmD
13
SBM Code Price HA Code Price Diameter Length Platform875706 $225.00 885706 $250.00 5.7mmD 6mmL 5.7mmD875708 $225.00 885708 $250.00 5.7mmD 8mmL 5.7mmD875710 $225.00 885710 $250.00 5.7mmD 10mmL 5.7mmD875711 $225.00 885711 $250.00 5.7mmD 11.5mmL 5.7mmD875713 $225.00 885713 $250.00 5.7mmD 13mmL 5.7mmD875716 $225.00 885716 $250.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform874206 $225.00 884206 $250.00 4.2mmD 6mmL 3.5mmD874208 $225.00 884208 $250.00 4.2mmD 8mmL 3.5mmD874210 $225.00 884210 $250.00 4.2mmD 10mmL 3.5mmD874211 $225.00 884211 $250.00 4.2mmD 11.5mmL 3.5mmD874213 $225.00 884213 $250.00 4.2mmD 13mmL 3.5mmD874216 $225.00 884216 $250.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform874706 $225.00 884706 $250.00 4.7mmD 6mmL 4.5mmD874708 $225.00 884708 $250.00 4.7mmD 8mmL 4.5mmD874710 $225.00 884710 $250.00 4.7mmD 10mmL 4.5mmD874711 $225.00 884711 $250.00 4.7mmD 11.5mmL 4.5mmD874713 $225.00 884713 $250.00 4.7mmD 13mmL 4.5mmD874716 $225.00 884716 $250.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform873706 $225.00 883706 $250.00 3.7mmD 6mmL 3.5mmD873708 $225.00 883708 $250.00 3.7mmD 8mmL 3.5mmD873710 $225.00 883710 $250.00 3.7mmD 10mmL 3.5mmD873711 $225.00 883711 $250.00 3.7mmD 11.5mmL 3.5mmD873713 $225.00 883713 $250.00 3.7mmD 13mmL 3.5mmD873716 $225.00 883716 $250.00 3.7mmD 16mmL 3.5mmD
874208 874210 874213 874216874211
Legacy4: Two-Piece Implant for Two-Stage Surgery
875708 875710 875713 875716875711
Legacy4SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
874708 874710 874713 874716874711
884208874206884206 884210 884213 884216884211
884708874706884706 884710 884713 884716884711
885708875706885706 885710 885713 885716885711
SBM Code Price HA Code Price Diameter Length Platform877006 $225.00 887006 $250.00 7.0mmD 6mmL 5.7mmD877008 $225.00 887008 $250.00 7.0mmD 8mmL 5.7mmD877010 $225.00 887010 $250.00 7.0mmD 10mmL 5.7mmD877011 $225.00 887011 $250.00 7.0mmD 11.5mmL 5.7mmD877013 $225.00 887013 $250.00 7.0mmD 13mmL 5.7mmD
877008 877010 877013877011887008 887010 887013887011
3.7mmD
4.2mmD
4.7mmD
5.7mmD
7.0mmD
SBM Code Price HA Code Price Diameter Length Platform875206 $225.00 885206 $250.00 5.2mmD 6mmL 4.5mmD875208 $225.00 885208 $250.00 5.2mmD 8mmL 4.5mmD875210 $225.00 885210 $250.00 5.2mmD 10mmL 4.5mmD875211 $225.00 885211 $250.00 5.2mmD 11.5mmL 4.5mmD875213 $225.00 885213 $250.00 5.2mmD 13mmL 4.5mmD875216 $225.00 885216 $250.00 5.2mmD 16mmL 4.5mmD
875208 875210 875213 875216875211885208 885210 885213 885216885211
5.2mmD
873208 873210 873213 873216873211
3.2mmD
883208 883210 883213 883216883211
873708 873710 873713 873716873711883708
873706883706 883710 883713 883716883711
875206885206
877006887006
14
Legacy Labeling: Definitions & Descriptions
3.
7 3.
5
803713803713
# 803
713
xxxxxxxxxxxx
SBM™
3
.7 3.5
# 803
713
xxxxxxxxxxxx
3.7mm Diam 13mm
3.5mm Diam
Lega
cy™1
Lega
cy™1
Legacy™3 Implant1
mm mmBo
dyPla
tform
mm mmBo
dyPla
tform
Legacy Implant Vial and Cap Label
1) Our products carry the CE mark and fulfill the requirementsof the Medical Device Directive 93/42/EEC
2) Manufacturer Symbol3) Product code or reference number4) Product description5) Use before expiration date (XXXX-XX)6) Gamma sterilization symbol7) Single-use only symbol8) Caution: US law restricts the sale of these devices
by or on the order of a dentist or physician9) Tamper proof symbol
10) Refer to Instructions For Use (IFU)11) Lot number (XXXXXXXXXX)12) Implant body diameter color reference on surgical tray13) Implant prosthetic platform diameter (written and color-coded)14) Non-sterile symbol
3
1
4
5
6
7 11
12
13
8 10
80 = Legacy1 SBM37 = 3.7mmD body diameter13 = 13mmL body length
3.5
8035-478035-47
Platform: 3.5mm Diam Pla
stic Tem
porar
y Ab
ut. #
8035
-47
xxxxxxxxxxxx
xxxxxxxxxxxx
mmPla
tform
Plastic Tem
porar
y Ab
ut.# 8
035-47
3.5 m
m Pla
tform
Plastic Engaging Temporary AbutmentIncludes: Fixation Screw [1000-01]
Legacy Prosthetic Vial and Cap Label
8035-47
3
1
4
7
8
14 11
13
13
109
80 = Legacy prosthetics35 = 3.5mmD platform diameter-47= prosthetic specific code
9
2
2
15
The implant is mounted on a color-coded Carrier/Transfer. A cover screw and extender are included in each vial.
Each cap label is color coded byplatform diameter of implant
All the implants come in a sterile vial
Each vial label is color-coded with two tear-off labels
Drop implant assembly out of vial onto a sterile surface
Remove implant assembly withinsertion tool & drill or ratchet
Remove the holder containingthe cover screw & extender
Align the flat of the fixture mount to the labial
Unscrew the cover screw & extender
Prepare surgical site withdouble cutting step drill
Insert implant into osteotomy Index fixture-mount flat to labial
Remove fixture-mount
Attach the cover screw to implant
Suture soft tissue over coverscrew
Attach the cover screw & extender to implant
Suture soft tissue aroundcover screw & extender
Legacy Fixture-Mount Packaging
8035-318035-32
8035-31C8035-32C
8035-518035-52
3.5mmD Platform3.0mmD Platform
8530-01 8530-13 8530-15
85378530-21 8530-22 8530-23
3037-26
8537-028035-21 8035-22 8035-23
8035-40 8035-41 8035-44
8035-64-15 8035-64-30
8035-94-15 8035-94-30
8530-62 8530-648530-61
8035-72
8530-318530-32
8530-518530-52
8530-31C8530-32C
8530-51-15C8530-52-15C
8530-51-08C8530-52-08C
8530-41 8530-468530-40 8530-47 8530-49*8730-47
8035-91
8530-05 8530-08 8530-06 8035-01 8035-13 8035-15
Fixture-Mount
8530-91 8530-93 8530-948530-92
Cover Screws, Healing Collars,Implant Transfers & Analogs
Straight Abutments, Comfort Caps, Transfers & Analogs
Engaging & Non-EngagingAbutments
Ball, GPS™ & Screw-Receiving
Overdenture Abutments
Straight & AngledContoured & HLA Abutments
Legacy Selection Chart
16 *concave profile
4.5mmD Platform 5.7mmD Platform
Fixture-Mount
3047
3047-26
3047-02
30578045-21 8045-22 8045-23
3057-26
3057-02 3065-02
30658057-21 8057-22 8057-23
3065-26
8057-318057-32
8057-518057-52
HLA5-6HLA5-7
8045-318045-32
8045-31C8045-32C
8045-518045-52
8045-51-08C8045-52-08C
8045-51-15C8045-52-15C
HLA4-5HLA4-6
8035-51-08C8035-52-08C
8035-51-15C8035-52-15C
HLA3-4HLA3-5
8035-46 8035-47*8735-47
8035-49 8045-40 8045-41 8045-44 8045-46 8045-47*8745-47
8045-49 8057-40 8057-44 8057-46 8057-47 8057-49
8035-62 8035-64
8035-74
8035-94 8035-95
8045-61 8045-62 8045-64
8045-72 8045-74
8045-91 8045-93 8045-948045-92
8045-64-15 8045-64-30
8045-95
8057-61 8057-62 8057-64
8057-72 8057-74
8057-91 8057-93 8057-948057-92 8057-95
8035-05 8035-08 8035-06 8045-01 8045-13 8045-15 8045-05 8045-08 8045-06 8057-01 8057-13 8057-15 8057-05 8057-08 8057-06
Fixture-MountFixture-Mount
8035-61
8045-94-15 8045-94-308035-92 8035-93
17
*8757-47
18
Code Description Price (includes two pieces)1000-20 For use with 3.0mmD hexagon platform $30.001000-41 For use with 3.0mmD hexagon platform $30.001000-26 For use with 3.0mmD hexagon platform $30.001000-01 For use with 3.5, 4.5 & 5.7mmD hexagon platforms $30.001000-06 For use with 3.5, 4.5 & 5.7mmD hexagon platforms $30.001000-10 For use with 3.5, 4.5 & 5.7mmD hexagon platforms $30.00
Code Platform Width Length Price8530-13 3.0mmD 3.8mmD 3mmL $35.008530-15 3.0mmD 3.8mmD 5mmL $35.008035-13 3.5mmD 4.8mmD 3mmL $35.008035-15 3.5mmD 4.8mmD 5mmL $35.008045-13 4.5mmD 5.8mmD 3mmL $35.008045-15 4.5mmD 5.8mmD 5mmL $35.008057-13 5.7mmD 6.6mmD 3mmL $35.008057-15 5.7mmD 6.6mmD 5mmL $35.00
Healing Collars
Closed-Tray Implant Transfers
Open-Tray Implant Transfers
Cover Screws, Healing Collars, Transfers & Analogs
Code Platform Replacement Screw Price8530-05 3.0mmD 1000-41 $35.008035-05 3.5mmD 1000-06 $35.008045-05 4.5mmD 1000-06 $35.008057-05 5.7mmD 1000-06 $35.00
Implant Analogs
Code Platform Price8530-06 3.0mmD $20.008035-06 3.5mmD $20.008045-06 4.5mmD $20.008057-06 5.7mmD $20.00 8057-068045-068530-06 8035-06
Surgical Cover Screws
Code Code [*for 6mmL Only] Platform Price8530-01 - 3.0mmD $20.008035-01 8035-01S 3.5mmD $20.008045-01 8045-01S 4.5mmD $20.008057-01 8057-01S 5.7mmD $20.00
8530-13 8035-13 8045-13 8057-13
Price includes Fixation Screw with 1.25mmD Hex
Requires 1.25mmD Hex Tool
1000-061000-41 8035-05 8045-05 8057-05
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Replacement Screw Price8530-08 3.0mmD 1000-26 $35.008035-08 3.5mmD 1000-10 $35.008045-08 4.5mmD 1000-10 $35.008057-08 5.7mmD 1000-10 $35.00
1000-10 8035-08 8045-08 8057-088530-081000-26
8530-05
Replacement Fixation Screws
1000-26
Open-Tray Transfer& Waxing Screw
1000-203.0mmD Hex Platform
1000-061000-01 1000-101000-41
Closed-TrayTransfer &TemporaryAbutment
8530-15 8035-15 8045-15 8057-15
8035-01*8035-01S
8530-01 8057-01*8057-01S
8045-01*8045-01S
Abutments
Requires 1.25mmD Hex Tool
Requires 1.25mmD Hex Tool
Code Platform Abutment Width Price8730 3.0mmD 3.7mmD $30.008735 3.5mmD 4.7mmD $30.008745 4.5mmD 5.7mmD $30.008757 5.7mmD 6.5mmD $30.00
Straight Abutment Analogs
Straight Abutment Castable Coping
Straight Abutment Comfort Caps
Straight Abutment Transfers
Straight Abutments
Code Platform Collar Heights Use Analog Price8530-21 3.0mmD 1.0mm 8537 $100.008530-22 3.0mmD 2.0mm 8537 $100.008530-23 3.0mmD 3.0mm 8537 $100.008035-21 3.5mmD 1.0mm 3047 $100.008035-22 3.5mmD 2.0mm 3047 $100.008035-23 3.5mmD 3.0mm 3047 $100.008045-21 4.5mmD 1.0mm 3057 $100.008045-22 4.5mmD 2.0mm 3057 $100.008045-23 4.5mmD 3.0mm 3057 $100.008057-21 5.7mmD 1.0mm 3065 $100.008057-22 5.7mmD 2.0mm 3065 $100.008057-23 5.7mmD 3.0mm 3065 $100.00
19
Straight Abutments, Snap-on Transfers & Lab Analogs
Includes Transfer, Comfort Cap & Fixation Screw with 1.25mmD Hex
Code Abutment Width Price (includes two pieces)3037-26 3.7mmD $30.003047-26 4.7mmD $30.003057-26 5.7mmD $30.003065-26 6.5mmD $30.00
Code Abutment Width Price (includes two pieces)8537-02 3.7mmD $30.003047-02 4.7mmD $30.003057-02 5.7mmD $30.003065-02 6.5mmD $30.00
3047-26 3057-26 3065-263037-26
3047-02 3057-02 3065-028537-02
3047 3057 30658537
Code Abutment Width Price (includes two pieces)3037-28 3.7mmD $30.003047-28 4.7mmD $30.003057-28 5.7mmD $30.003065-28 6.5mmD $30.00
3047-28 3057-28 3065-283037-28
Includes Castable Coping
8530-23 8035-23 8045-23 8057-23
8530-22 8035-22 8045-22 8057-22
8530-21 8035-21 8045-21 8057-21
Code Abutment Width Price8537 3.7mmD $35.003047 4.7mmD $35.003057 5.7mmD $35.003065 6.5mmD $35.00
Straight Abutment Analogs - Concave Profile
8735 8745 87578730
Code Platform Angulation Collar Heights Replacement Screw Price8045-31C 4.5mmD 0° 1mm 1000-01 $120.008045-32C 4.5mmD 0° 2mm 1000-01 $120.00
8045-51-08C 4.5mmD 8° 1mm 1000-01 $120.008045-52-08C 4.5mmD 8° 2mm 1000-01 $120.008045-51-15C 4.5mmD 15° 1mm 1000-01 $120.008045-52-15C 4.5mmD 15° 2mm 1000-01 $120.00
8045-30CB 4.5mmD - .5mm 1000-01 $60.00
Code Platform Angulation Collar Heights Replacement Screw Price8530-31C 3.0mmD 0° 1mm 1000-20 $120.008530-32C 3.0mmD 0° 2mm 1000-20 $120.00
8530-51-08C 3.0mmD 8° 1mm 1000-20 $120.008530-52-08C 3.0mmD 8° 2mm 1000-20 $120.008530-51-15C 3.0mmD 15° 1mm 1000-20 $120.008530-52-15C 3.0mmD 15° 2mm 1000-20 $120.00
8530-30CB 3.0mmD - .5mm 1000-20 $60.00
Code Platform Angulation Collar Heights Replacement Screw Price8035-31C 3.5mmD 0° 1mm 1000-01 $120.008035-32C 3.5mmD 0° 2mm 1000-01 $120.00
8035-51-08C 3.5mmD 8° 1mm 1000-01 $120.008035-52-08C 3.5mmD 8° 2mm 1000-01 $120.008035-51-15C 3.5mmD 15° 1mm 1000-01 $120.008035-52-15C 3.5mmD 15° 2mm 1000-01 $120.00
8035-30CB 3.5mmD - .5mm 1000-01 $60.00
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-31 3.0mmD 1mm 1000-20 $100.008530-32 3.0mmD 2mm 1000-20 $100.008035-31 3.5mmD 1mm 1000-01 $100.008035-32 3.5mmD 2mm 1000-01 $100.008045-31 4.5mmD 1mm 1000-01 $100.008045-32 4.5mmD 2mm 1000-01 $100.008057-31 5.7mmD 1mm 1000-01 $100.008057-32 5.7mmD 2mm 1000-01 $100.00
Straight Titanium Contoured Abutments
20
Straight & Angled Contoured, Titanium & Zirconia Abutments
8035-31 8045-31 8057-318530-31
8035-32 8045-32 8057-328530-32
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-51 3.0mmD .75mm 1000-20 $100.008530-52 3.0mmD 2mm 1000-20 $100.008035-51 3.5mmD .75mm 1000-01 $100.008035-52 3.5mmD 2mm 1000-01 $100.008045-51 4.5mmD .75mm 1000-01 $100.008045-52 4.5mmD 2mm 1000-01 $100.008057-51 5.7mmD .75mm 1000-01 $100.008057-52 5.7mmD 2mm 1000-01 $100.00
Angled Titanium Contoured Abutments
8035-51 8045-51 8057-518530-51
8035-52 8045-52 8057-528530-52
Price includes Fixation Screw with 1.25mmD Hex0°, 8° & 15° Zirconia Contoured Abutments
8530-52-08C 8530-52-15C8530-32C
8035-51-15C8035-31C
8045-51-08C 8045-51-15C8045-31C
8045-52-08C 8045-52-15C
8530-30CB
8035-30CB
8045-30CB
8530-31C 8530-51-08C 8530-51-15C
8035-32C 8035-52-08C 8035-52-15C
8045-32C
8035-51-08C
Code Platform Collar Heights Replacement Screw PriceHLA3-4 3.5mmD - 1000-01 $85.00HLA3-5 3.5mmD - 1000-01 $85.00HLA4-5 4.5mmD - 1000-01 $85.00HLA4-6 4.5mmD - 1000-01 $85.00HLA5-6 5.7mmD - 1000-01 $85.00HLA5-7 5.7mmD - 1000-01 $85.00
Price includes Fixation Screw with 1.25mmD Hex Straight Full-Contoured (HLA) Abutments
HLA3-5 HLA4-6
HLA3-4 HLA4-5
HLA5-7
HLA5-6
Engaging & Non-Engaging, Gold, Plastic & Titanium Abutments
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-40 3.0mmD 1.0mm 1000-20 $120.008035-40 3.5mmD 1.0mm 1000-01 $120.008045-40 4.5mmD 1.0mm 1000-01 $120.008057-40 5.7mmD 1.0mm 1000-01 $120.00
Gold Engaging Cast-to Abutments
8530-40 8035-40 8045-40 8057-40
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-46 3.0mmD - 1000-20 $35.008035-46 3.5mmD - 1000-01 $35.008045-46 4.5mmD - 1000-01 $35.008057-46 5.7mmD - 1000-01 $35.00
Plastic Non-Engaging Castable Abutments
8035-46 8045-46 8057-46
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-49 3.0mmD 1.0mm 1000-20 $40.008035-49 3.5mmD 1.0mm 1000-01 $40.008045-49 4.5mmD 1.0mm 1000-01 $40.008057-49 5.7mmD 1.0mm 1000-01 $40.00
Titanium Non-Engaging Temporary Abutments
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-47 3.0mmD 1.0mm 1000-41 $40.008035-47 3.5mmD 1.0mm 1000-06 $40.008045-47 4.5mmD 1.0mm 1000-06 $40.008057-47 5.7mmD 1.0mm 1000-06 $40.00
Plastic Engaging Temporary Abutments
8530-47 8035-47 8045-47 8057-47
Code Platform Collar Heights Replacement Screw Price8730-47 3.0mmD 2.0mm 1000-41 $40.008735-47 3.5mmD 2.0mm 1000-06 $40.008745-47 4.5mmD 2.0mm 1000-06 $40.008757-47 5.7mmD 2.0mm 1000-06 $40.00
Plastic Engaging Temporary Abutments - Concave Profile
8730-47 8735-47 8745-47 8757-47
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8035-44 3.5mmD - 1000-01 $40.008045-44 4.5mmD - 1000-01 $40.008057-44 5.7mmD - 1000-01 $40.00
Plastic Engaging Castable Abutments
8035-44 8045-44 8057-44
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-41 3.0mmD 1.0mm 1000-20 $120.008035-41 3.5mmD 1.0mm 1000-01 $120.008045-41 4.5mmD 1.0mm 1000-01 $120.00
Gold Non-Engaging Cast-to Abutments
8530-41 8035-41 8045-41
21
Price includes Fixation Screwwith 1.25mmD Hex
8530-49 8035-49 8045-49 8057-49
8530-46
22
3.0mmDPlatform
3.5mmDPlatform
4.5mmDPlatform
5.7mmDPlatform
Selection Chart: Overdenture & Screw-Retained Restorations
BallAbutment
Components
BallAbutments
OverdentureAbutments
Overdenture Screw-Retained Copings
OverdentureAbutment
Components
OD AbutmentComfort Cap
Transfer &Analogs
*1000-68*4000-13
Open-Tray Transfer Closed-Tray Transfer
Screw-Receiving Overdenture Abutment Transfer, Analog & Comfort Cap
GPSAbutment
Components
GPSAbutments
Gold Titanium Plastic Gold/Plastic Titanium
1000-61 1000-62 1000-63
1000-64 1000-65 1000-66 1000-67 1000-69
Abutments are compatible with Zimmer, BioHorizons (internal) and MIS Implants with 3.5mm, 4.5mmD and 5.7mmD prosthetic platforms
8530-618530-628530-64
8057-618057-628057-64
8035-618035-628035-64
Screw-Receiving Overdenture Abutments (*Includes Transfer & Comfort Cap)
8045-618045-628045-64
8045-64-158045-64-30
8035-64-158035-64-30
8035-728035-74
8045-728045-74
8057-728057-74
**1000-84**1000-87 1000-85 1000-81 1000-82 1000-88 1000-83 1000-86
8035-918035-928035-938035-948035-95
8530-918530-928530-938530-94
8045-918045-928045-938045-948045-95
8057-918057-928057-938057-948057-95
GPS Attachments
Ball Attachments
Ball Abutments (**Includes Transfer & Comfort Cap)
***1000-94 1000-95 1000-98S 1000-96***4500-26
***1000-91W
1000-98SI
1000-91
1000-92C 1000-92E
1000-93
1000-92R1000-92G
1000-92B1000-92P 1000-92W
8035-94-158035-94-30
8045-94-158045-9 4-30
GPS Abutments (***Includes Transfer, Abutment Housing Kit & Comfort Cap)
Platform Collar Heights Price2mmL 4mmL
3.5mmD 8035-72 8035-74 $90.004.5mmD 8045-72 8045-74 $90.005.7mmD 8057-72 8057-74 $90.00
Code Platform Description Price8035-64-15 3.5mmD 15º Angled Abutment $120.008045-64-15 4.5mmD 15º Angled Abutment $120.008035-64-30 3.5mmD 30º Angled Abutment $120.008045-64-30 4.5mmD 30º Angled Abutment $120.00
Screw-Receiving Angled Overdenture Abutments Includes Transfer & Comfort Cap - requires1.25mmD & 2.5mmD Hex Tool
23
8045-64-30
Screw-Receiving, Ball & GPS Abutments
Includes Transfer & Comfort Cap -requires 1.25mmD Hex Tool
8057-728057-74
8035-728035-74
8045-728045-74
Ball Abutments
Platform Collar Heights Price1mmL 2mmL 4mmL
3.0mmD - 8530-62 8530-64 $100.003.5mmD 8035-61 8035-62 8035-64 $100.004.5mmD 8045-61 8045-62 8045-64 $100.005.7mmD 8057-61 8057-62 8057-64 $100.00
Includes Transfer & Comfort Cap -requires 1.25mmD Hex Tool
Screw-Receiving Overdenture Abutments
8035-61 8035-62 8035-64
8045-618045-628045-64
8057-618057-628057-64
8530-628530-64
8035-64-308035-64-15 8045-64-15
Code Platform Description Price8035-94-15 3.5mmD 15º Angled Abutment $120.008045-94-15 4.5mmD 15º Angled Abutment $120.008035-94-30 3.5mmD 30º Angled Abutment $120.008045-94-30 4.5mmD 30º Angled Abutment $120.00
Angled GPS Abutments Includes Transfer, Comfort Cap, Metal Housing, WhiteMale Liner & Spacer - requires 1.25mmD Hex Tool
8045-94-308035-94-308035-94-15 8045-94-15
GPS Abutments
Platform Collar Heights Price1mmL 2mmL 3mmL 4mmL 5mmL
3.0mmD 8530-91 8530-92 8530-93 8530-94 - $100.003.5mmD 8035-91 8035-92 8035-93 8035-94 8035-95 $100.004.5mmD 8045-91 8045-92 8045-93 8045-94 8045-95 $100.005.7mmD 8057-91 8057-92 8057-93 8057-94 8057-95 $100.00
Includes Transfer, Comfort Cap, Metal Housing, White MaleLiner & Spacer - requires 1.25mmD Hex Tool
8530-918530-928530-938530-94
8035-918035-928035-938035-948035-95
8045-918045-928045-938045-948045-95
8057-918057-928057-938057-948057-95
Code Description Price1000-60 Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool] $35.001000-70 Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool] $35.001000-90 Replacement GPS Top for Angled Base [Requires 1.25mmD Hex Tool] $35.00
Replacement Tops for Angled Abutments Includes Transfer & Comfort Cap
1000-901000-701000-60
GPS Abutment Transfer, Analogs and Alignment Tools
Code Description Price1000-94 Impression Coping - 2ea $30.001000-95 Abutment Analog 4mmD - 2ea $40.001000-97 Abutment Parallel Post - 4ea $16 .004500-26 Comfort Cap - 2ea $10.001000-99 Plastic Abutment Angle Measure Guide $5.00
Code Prosthetic Platform Description Price1000-61 5.0mmD Aluminum Analog $30.001000-62 5.0mmD Open-Tray Transfer plus Fixation Screw $35.001000-63 5.0mmD Closed-Tray Transfer plus Fixation Screw $35.001000-68 5.0mmD Plastic Abutment Transfer - 2ea $35.004000-13 5.0mmD Plastic Comfort Cap - 2ea $30.001000-14 - Replacement Open-Tray Fixation Screw - 2ea $30.001000-15 - Replacement Closed-Tray Fixation Screw - 2ea $30.00
24
Code Description Price1000-81 Ball Abutment Housing - 2ea $30.001000-82 Nylon Liner - 2ea $15.001000-83 Nylon Liner Transfer - 2ea $15.001000-84 Ball Abutment Transfer - 2ea $30.001000-85 Ball Abutment Analog $20.001000-86 Ball Abutment Tools $65.001000-87 Ball Abutment Comfort Cap - 2ea $30.001000-88 Ball Abutment Housing & Nylon Liner $22.00
Ball Abutment Components
1000-82
1000-84
1000-861000-85 1000-87 1000-88
1000-831000-81
Code Prosthetic Platform Description Price1000-05 - Coping Replacement Fixation Screw - 2ea $30.001000-64 5.0mmD Gold Coping $80.001000-65 5.0mmD Titanium Coping $40.001000-66 5.0mmD Plastic Coping $35.001000-67 5.0mmD Gold & Plastic Coping $80.001000-69 5.0mmD Titanium Temporary Coping $35.00
Overdenture Screw-Retained Abutment Components
1000-661000-65 1000-671000-05 1000-64 1000-69
Screws require 1.25mmD Hex Tool
Screw-Receiving Overdenture Abut. Comfort Cap, Transfers & Analog
1000-681000-61 1000-62 1000-63 4000-13
1000-99
1000-97
1000-951000-94
Code Description Price1000-96 Core Tool - Male Removal & Seating Tool $75.00
GPS Instrumentation
1000-96
Ancillary Components for Overdenture & Screw-Retained Restorations
Includes Fixation Screw [1000-05]with 1.25mmD Hex
4500-26
Code Retention Force Description Price1000-92W 5.0lbs Internal Replacement Male White - 4ea $22.001000-92P 3.0lbs Internal Replacement Male Pink - 4ea $22.001000-92B 1.5lbs Internal Replacement Male Blue - 4ea $22.001000-92C 4.5lbs External Replacement Male Clear - 4ea $16.001000-92G 3.0lbs External Replacement Male Green - 4ea $16.001000-92E 2.0lbs External Replacement Male Orange - 4ea $16.001000-92R 1.0lb External Replacement Male Red - 4ea $16.001000-91 - GPS Housing Kit - 1ea $10.001000-91W - GPS Housing Kit w/ White Internal Male - 1ea $15.001000-93 - Black Processing Male - 4ea $16.001000-98SI Assorted Internal Processing Cap/Male Kit - 1ea $26.001000-98S Assorted External Processing Cap/Male Kit - 1ea $20.00
GPS Abutment Components
1000-92B
1000-92E1000-92P
1000-98S
1000-911000-91W
1000-92G1000-92W
1000-98SI
1000-92C
1000-92R
1000-93
Straight Hex Tools
Code Description PriceHT1.25L 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) $40.00HT1.25 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) $40.00
HT1.25S 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) $40.00HT2.0 2.0mmD Hex Tool Long $40.00
HT2.0S 2.0mmD Hex Tool Short $40.00HT2.5 2.5mmD Hex Tool Long (with retentive O-ring) $40.00
HT2.5S 2.5mmD Hex Tool Short (with retentive O-ring) $40.00HT3.0 3.0mmD Hex Tool Long $40.00
HT3.0S 3.0mmD Hex Tool Short $40.00
Square connection for use with Ratchet or Torque Wrench
Surgical Trays
Code Description PriceST Empty Surgical Kit for Legacy System Implants $250.00
BST Basic Surgical Kit for Legacy System Implants $1265.00CST Complete Surgical Kit for Legacy System Implants $2565.00
Surgical & Prosthetic Instruments
ST CSTBST
25
Tapered Hex Tools
Code Description PriceTHT1.25 1.25mmD Tapered Hex Tool Long $40.00
THT1.25S 1.25mmD Tapered Hex Tool Short $40.00THT1.25STHT1.25
Hex Drills
Code Description PriceHD1.25 1.25mmD Hex Drill $40.00HD2.0 2.0mmD Hex Drill $40.00HD2.5 2.5mmD Hex Drill (with retentive O-ring) $40.00HD3.0 3.0mmD Hex Drill $40.00 HD1.25 HD3.0HD2.0 HD2.5
Latch head connection for use with Surgical Motor
Ancillary Instruments
Code Description PriceR Ratchet $125.00
TW30 30Ncm Torque Wrench $125.00TW35 35Ncm Torque Wrench $125.00
SSH2.5 2.5mmD Stainless Steel Handle (with retentive O-ring) $100.00FMD Fixture Mount Drill $80.00PAR Paralleling Tool 2.8/2.3 $15.00
LDRILL Locator Drill $30.00DE Drill Extender $40.00
TWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) $395.00ABH Analog Holder $85.00
R TW30
PARFMD DELDRILL
ABH
TWM
HT3.0HT2.5HT2.0HT1.25
HT2.5S HT3.0SHT2.0SHT1.25S
HT1.25L
TW35 SSH2.5
26
3.2mmD Implants
Code Description PriceSD2.3 2.3/2.0mmD Step Drill with 6-16 markings $60.00
SD2.3S 2.3/2.0mmD Step Drill with 6-10 markings $60.00SD2.8 2.8/2.3mmD Step Drill with 6-16 markings $60.00
SD2.8S 2.8/2.3mmD Step Drill with 6-10 markings $60.00CBD3.2 Cortical Bone Drill for 3.0 and 3.2mmD Implants $60.00
SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2
Surgical Drills
3.7mmD Implants
Code Description PriceSD3.4 3.4/2.8mmD Step Drill with 6-16 markings $60.00
SD3.4S 3.4/2.8mmD Step Drill with 6-10 markings $60.00CBD3.7 Cortical Bone Drill for 3.7mmD Implants $60.00
SD3.4 SD3.4S CBD3.7
4.7mmD Implants
Code Description PriceSD4.4 4.4/3.8mmD Step Drill with 6-16 markings $60.00
SD4.4S 4.4/3.8mmD Step Drill with 6-10 markings $60.00CBD4.7 Cortical Bone Drill for 4.7mmD Implants $60.00
SD4.4 SD4.4S
4.2mmD Implants
Code Description PriceSD3.8 3.8/3.4mmD Step Drill with 6-16 markings $60.00
SD3.8S 3.8/3.4mmD Step Drill with 6-10 markings $60.00CBD4.2 Cortical Bone Drill for 4.2mmD Implants $60.00
SD3.8 SD3.8S
5.7 and 7.0mmD Implants
Code Description PriceD5.1 5.1mmD Straight Drill with 6-16 markings $60.00
D5.1S 5.1mmD Straight Drill with 6-10 markings $60.00SD5.4 5.4/4.8mmD Step Drill with 6-16 markings $60.00
SD5.4S 5.4/4.8mmD Step Drill with 6-10 markings $60.00CBD5.7 Cortical Bone Drill for 5.7mmD Implants $60.00CBD7.0 Cortical Bone Drill for 7.0mmD Implants $60.00
D5.1 D5.1S SD5.4 SD5.4S
5.2mmD Implants
Code Description PriceSD4.8 4.8/4.4mmD Step Drill with 6-16 markings $60.00
SD4.8S 4.8/4.4mmD Step Drill with 6-10 markings $60.00CBD5.2 Cortical Bone Drill for 5.2mmD Implants $60.00
SD4.8 SD4.8S
CBD4.2
CBD4.7
CBD5.2
CBD5.7 CBD7.0
27
Drill Sequence
3.2mmD Straight / Tapered Implant
3.7mmD Straight / Tapered Implant
4.2mmD Straight / Tapered Implant
4.7mmD Straight / Tapered Implant
5.2mmD Straight / Tapered Implant
3.5/3.7
3.5/4.2
4.5/4.7
4.5/5.2
3.0/3.2
5.7mmD & 7.0mmD Straight / Tapered Implant
SD4.44.4/3.8mmD
SD4.84.8/4.4mmD
SD3.83.8/3.4mmD
SD5.45.4/4.8mmD
CBD5.7D5.1 5.1mmD
SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional OptionalOptional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
for 5.7mmD
SD3.43.4/2.8mmD
CBD3.7SD2.82.8/2.3mmD
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD2.82.8/2.3mmD
CBD3.2SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD3.83.8/3.4mmD
CBD4.2SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD4.44.4/3.8mmD
CBD4.7SD3.83.8/3.4mmD
SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD3.83.8/3.4mmD
SD4.84.8/4.4mmD
CBD5.2SD4.44.4/3.8mmD
SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
OptionalOptional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
5.7/7.0
CBD7.0
OptionalBone Contour
for 7.0mmD5.7/5.7
THT1.25S HT1.25S HT2.0S HT2.5S HT3.0S
THT1.25
PAR (4)
LDRILL DE
R
SSH2.5
HT1.25 HT2.0 HT2.5 HT3.0
HD2.0HD1.25FMD HD3.0HD2.5
SD3.4 SD3.4SSD2.8 SD2.8S SD3.8 SD3.8S SD4.4 SD4.4S SD4.8 SD4.8S
D5.1 D5.1S
SD2.3 SD2.3S
SD5.4 SD5.4S
CBD5.2CBD4.7CBD4.2CBD3.7CBD3.2
CBD5.7
Place for the InterActive System Tools
Coming Soon
lower level of surgical tray
28
Complete Surgical Tray Contents
29
Surgical Tray
Inside EmptyTray
Lid
Surgical Tray Contents Complete Kit Basic Kit Conversion KitCode Description Price $2,565.00 $1,265.00 $930.00
ST Empty Surgical Tray $250.00 X X XSD2.3 2.3/2.0mmD Step Drill-Long $60.00 X X
SD2.3S 2.3/2.0mmD Step Drill-Short $60.00 XSD2.8 2.8/2.3mmD Step Drill-Long $60.00 X X
SD2.8S 2.8/2.3mmD Step Drill-Short $60.00 XCBD3.2 3.2mmD Cortical Drill $60.00 X XSD3.4 3.4/2.8mmD Step Drill-Long $60.00 X X
SD3.4S 3.4/2.8mmD Step Drill-Short $60.00 XCBD3.7 3.7mmD Cortical Drill $60.00 X XSD3.8 3.8/3.4mmD Step Drill-Long $60.00 X X X
SD3.8S 3.8/3.4mmD Step Drill-Short $60.00 X XCBD4.2 4.2mmD Cortical Drill $60.00 X XSD4.4 4.4/3.8mmD Step Drill-Long $60.00 X X
SD4.4S 4.4/3.8mmD Step Drill-Short $60.00 XCBD4.7 4.7mmD Cortical Drill $60.00 X XSD4.8 4.8/4.4mmD Step Drill-Long $60.00 X X X
SD4.8S 4.8/4.4mmD Step Drill-Short $60.00 X XCBD5.2 5.2mmD Cortical Drill $60.00 X X
D5.1 5.1mmD Straight Drill-Long $60.00 X XD5.1S 5.1mmD Straight Drill-Short $60.00 XSD5.4 5.4/4.8mmD Step Drill-Long $60.00 X X
SD5.4S 5.4/4.8mmD Step Drill-Short $60.00 XCBD5.7 5.7mmD Cortical Drill $60.00 X X
Hex ToolsTHT1.25 1.25mmD Tapered Hex Tool-Long $40.00 X X
THT1.25S 1.25mmD Tapered Hex Tool-Short $40.00 XHT1.25 1.25mmD Straight Hex Tool-Long $40.00 X X
HT1.25S 1.25mmD Straight Hex Tool-Short $40.00 XHT2.0 2.0mmD Straight Hex Tool-Long $40.00 X X
HT2.0S 2.0mmD Straight Hex Tool-Short $40.00 XHT2.5 2.5mmD Straight Hex Tool-Long $40.00 X X
HT2.5S 2.5mmD Straight Hex Tool-Short $40.00 XHT3.0 3.0mmD Straight Hex Tool-Long $40.00 X X
HT3.0S 3.0mmD Straight Hex Tool-Short $40.00 XHD1.25 1.25mmD Hex Drill $40.00 X XHD2.0 2.0mmD Hex Drill $40.00 X XHD2.5 2.5mmD Hex Drill $40.00 X XHD3.0 3.0mmD Hex Drill $40.00 X X
Ancillary InstrumentationFMD Fixture Mount Drill $80.00 X
LDRILL Locator Drill $30.00 X XDE Drill Extender $40.00 X XR Ratchet $125.00 X X
PAR (x4) Paralleling Tool 2.8/2.3 $60.00 X XSSH2.5 2.5mmD Stainless Steel Handle $100.00 X
A Legacy of Innovation
www.implantdirect.com | 888-649-6425
Square top detaches with impression formetal to metal
transfer accuracy
Torque- safetyfeature prevents damage
to implant interface
Legacy4 implant combines the popular Legacy2 implant body with a revolutionary two-piece fixture-mount for precision transfers and prosthetic simplicity.
Legacy™4 Implant
Progressively deeperbuttress threads
Quadruple-leadmicro-threads
Concavetransgingival
profile
Two-Piece fixture-mount (patent pending) with
preparable abutment
1982 Core-Vent® Implant & Abutment System Pat. #4,431,416, #4,645,453, #4,488,875, #4,758,161
1986 Screw-Vent® – First Internal ConnectionPat. #4,960,381
1987 Micro-Vent® – First Small Diameter ImplantPat. #5,061,181
Screw-Vent and Advent are now implant trademarks and products sold by Zimmer Dental Implant Company1900 Aston Avenue, Carlsbad, CA 92008.
1994 Friction-Fit Internal Connection Pat. #5,334,024
Friction-Fit External Connection Pat. #5,433,606
1990 Sterile Fixture-Mount Packaging Pat. #5,062,800
1999 Advent® One-Piece Implant for Edentulous Jaws Pat. #5,989,028
1995 Tapered Implant with Surgical Protocol for Stability Pat. #5,427,527
2006 Application-Specific Spectra-System® of ImplantsMicro-threads Pat. #7,677,891, Healing Collar Packaging Pat. #7,396,231, One-Piece Multi-unit Implant and Abutment Pat. #7,699,613, #8,118,596Multi-Functional Fixture-Mount Pat. #7,785,107
2007 RePlant® System with Tri-lobe Compatibility Pat #7,108,510
2008 SwishPlant™ with Octagon/Square Connection Patent Pending
2009 GoDirect® One-Piece Implant for Overdenture Attachment Patent Pending
Three long cutting grooves
Over 30 Years of Implant InnovationGerald A. Niznick, DMD, MSDPresident & CEOImplant Direct Int’l
2010 GPS™ Abutment with Internal Resilient Overdenture AttachmentPatent Pending
1996 Selective Surface & Dual Transition Surface TreatmentsPat. #5,571,017, #5,885,079
NEW
All-in-1 Packaging includes implant, fixture-mount, abutment, transfer, cover screw & healing collar — $225
2012 Legacy4 Implant with Two-Piece Fixture-Mount Packaging Patent Pending
7.5K-06-13-0041 Printed in the U.S.A. Copyright © 2013 Implant Direct Sybron International. All Rights Reserved*7.5-06-13-0041*