Date post: | 11-Mar-2016 |
Category: |
Documents |
Upload: | implant-direct |
View: | 262 times |
Download: | 1 times |
Legacy™ System Catalog
Page #
Table of Contents
simplyfixed SMART PACKS & Screw-Receiving Abutments
28 Gold, Plastic & Titanium Engaging & Non-Engaging Abutments
25-26simplycrown & bridge, Straight Abutments & Ancillary Components
29Scan Adapters & Overdenture Abutments
Cover Screws, Healing Collars, Transfers & Analogs
Straight & Angled Contoured, Titanium & Zirconia Abutments
16-21 Selection Charts
Overdenture & Screw-Receiving Abutment Ancillary Products
30 Selection Chart for Overdenture & Screw-Retained Restorations
Implant Design, Surface & Dimensions
Legacy1, Legacy2, Legacy3& Legacy4 Implants
Labeling & Fixture-Mount Packaging
33-35Instruments, Surgical Drills & Surgical Sequence
32
27
31
1-5
6-13
14-15
22-24
Surgical Tray36-37
The bodies of the Legacy1, Legacy2, Legacy3 and Legacy4 implants are tapered to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Legacy system implants. Mini-threads start 1mm below the crest of the bone and extend for 2.0-2.5mm before transitioning into double-lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend up the implant from the apex for self-tapping insertion.
Mini-threads with Double-lead Threads for Faster Insertion
Double Lead
Threads
Quadruple Lead Mini-
Threads
Implant Design & Surface
0.4mm
0.8mm
3.0 Deg.ID Taper
The 1.5o taper to the OD of the Legacy1, 2, 3 & 4 implants
facilitate soft bone expansion for increased stability.
All Legacy implants have mini-threads for reduced stress near the
crest of bone and double-lead threads on the body for 2X faster insertion
Animal Studies Bone Response to SBM Surface
SBM Surface 50X
HA Surface 50X
SBM Surface 20X
HA Surface 20X
1
SEM’s of Our SurfacesMini-threads textured by blasting with SBM: Blasted with Soluble HA ParticlesHA Coating: High Crystalline 40u layer
1.5 Deg. OD Taper
1.5 Deg. OD Taper
Buttress ThreadButtress ThreadStandard “V” Thread
0.3mm
0.6mm0.8mm
0.4mm
5.0 Deg.ID Taper
1.5 Deg.OD Taper
Legacy2 and Legacy4 Implants
Legacy1 threads provide the same 1.5o taper to the inside (ID) and outside thread (OD) diameters
SBM™ and HA Coated Surface OptionsSBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when these studies were conducted.
Legacy2, 3 & 4 provide more thread engagement by tapering the inside thread diameter (ID) at 3o & 5 o while the outside
thread diameter (OD) tapers at 1.5o
Brazilian Study* Shows SBM Provides Superior Bone Contact
Mean Percentage of Bone Contact%
80
70
60
50
40
30
20
10
SBM HA TPS Machined
62.7558.89
48.9141.70
LSU Study* Shows SBMProvides Superior Bone Contact%
80
70
60
50
40
30
20
10
SBM HA TPS Machined
63.8
57.6 52.7
36
0.25mmL Bevel
2
Legacy1 Implant Dimensions
5.7mmD Body
5.7mmD Platform
5.7mmD Platform with a 3.0mmD Internal Hex
5.7mmD Legacy15.1mmD Apex Diameter
1.5mm Hex Depth
Double-lead “V” Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
4.7mmD Body
4.5mmD Platform
4.5mmD Platform witha 2.5mmD Internal Hex
4.7mmD Legacy14.1mmD Apex Diameter
Double-lead “V” Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
1.5mm Hex Depth
1-72UNF Internal Thread
HA
HA SBM Texture
SBM Texture
1-72UNF Internal Thread
Taper starts at 1mm
Taper starts at 1mm
0.25mmL Bevel
4.2mmD Legacy13.6mmD Apex Diameter
Double-lead “V” Threads
1-72UNF Internal Thread
2.0mmL Zone Mini-threads
HA
3.7mmD Body
4.2mmD Body
3.5mmD Platform
with a 2.5mmD Internal
Hex
1.5mm Hex Depth
0.25mmL Bevel
3.7mmD Legacy13.1mmD Apex Diameter
Double-lead “V” Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
SBM Texture
1-72UNF Internal Thread
HA
Taper starts at 1mm
Length + 0.25mm
SBM Texture
Taper starts at 1mm
0.25mmL Bevel0.25mmL Bevel
0.25mmL Bevel
3
Legacy2 and Legacy4 Implant Dimensions
3.7mmD Legacy2 and Legacy43.1mmD Apex Diameter
4.7mmD Legacy2 and Legacy44.1mmD Apex Diameter
Double-lead Buttress Threads
1-72UNF Internal Thread
2.0mmL Zone Mini-threads
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
SBM TextureHA
4.2mmD Legacy2 and Legacy43.6mmD Apex Diameter
Double-lead Buttress Threads
1-72UNF Internal Thread
2.0mmL Zone Mini-threads
Length + 0.25mm
SBM TextureHA
Taper starts at 4.5mm
Taper starts at 4.5mm
Length + 0.25mm
Taper starts at 4.5mm
1-72UNF Internal Thread
HASBM
Texture
3.2mmD Legacy2 and Legacy42.3mmD Apex Diameter
Double-lead Buttress Threads
1.6 UNM Internal Thread
2.0mmL Zone Mini-threads
3.0mmD Platform with aDouble Internal Hex
2.25mmD (upper) and 2.0mmD (lower)
Length + 0.25mm
Taper starts at 3mm
HA SBM Texture
0.25mmL Bevel
0.25mmL Bevel
5.2mmD Legacy2 and Legacy4 4.6mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
SBM Texture
HA
1-72UNF Internal Thread
Taper starts at 3mm
3.2mmD Body
3.0mmD Platform
0.6mm Hex Depth
1.2mm Hex Depth
4.7mmD Body
5.2mmD Body
4.5mmD Platform with
a 2.5mmD Internal Hex
1.5mm Hex Depth
3.7mmD Body
4.2mmD Body
3.5mmD Platform
with a 2.5mmD Internal
Hex
1.5mm Hex Depth
4
3.2mmD Legacy32.6mmD Apex Diameter
Double-lead Buttress Threads
1.6 UNM Internal Thread
2.0mmL Zone Mini-threads
Legacy2 and Legacy4 Implant Dimensions continued
3.0mmD Platform with aDouble Internal Hex
2.25mmD (upper) and 2.0mmD (lower)
Length + 0.25mm
Taper starts at 1.25mm
HA
3.2mmD Body
3.0mmD Platform
0.6mm Hex Depth
1.2mm Hex Depth
SBM Texture
0.25mmL Bevel
0.25mmL Bevel
5.7mmD Legacy2 and Legacy45.1mmD Apex Diameter
Double-lead Buttress Threads
1-72UNF Internal Thread
2.0mmL Zone Mini-threads
Length + 0.25mm
5.7mmD Body
7.0mmD Body
1.5mm Hex Depth
HA
7.0mmD Legacy2 and Legacy45.1mmD Apex Diameter
Taper starts at 4.3 mmTaper starts
at 4.5mm
SBM Texture SBM
Texture
Length + 0.25mm
5.7mmD Platform with a 3.0mmD
Internal Hex
2.0mmL Zone Mini-threads
1-72UNF Internal Thread
HA
Double-lead Buttress Threads
Legacy3 Implant Dimensions
0.25mmL Bevel
0.25mmL Bevel
5
3.7mmD Legacy33.1mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
3.7mmD Body
4.2mmD Body
3.5mmD Platform
with a 2.5mmD Internal
Hex
Length + 0.25mm
1.5mm Hex Depth
4.7mmD Body
5.2mmD Body
Legacy3 Implant Dimensions continued
4.5mmD Platform with
a 2.5mmD Internal Hex
5.2mmD Legacy34.6mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
Length + 0.25mm
1.5mm Hex Depth
SBM Texture
SBM Texture
SBM Texture
Taper starts at 1.25mm
1-72UNF Internal Thread
HA
0.25mmL Bevel
4.2mmD Legacy33.6mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
SBM Texture
Taper starts at 1.25mm
1-72UNF Internal Thread
HA
HA
1-72UNF Internal Thread
0.25mmL Bevel
4.7mmD Legacy34.1mmD Apex Diameter
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
1-72UNF Internal Thread
HA
5.7mmD Legacy35.1mmD Apex Diameter
SBM Texture
Double-lead Buttress Threads
2.0mmL Zone Mini-threads
Length + 0.25mm
1-72UNF Internal Thread
HA
Taper starts at 1.25mm
Taper starts at 1.25mm
Taper starts at 1.25mm
0.25mmL Bevel5.7mmD Body
7.0mmD Body 1.5mm Hex Depth
7.0mmD Legacy35.1mmD Apex Diameter
Taper starts at 3 mm
SBM Texture
Length + 0.25mm
5.7mmD Platform with
a 3.0mmD Internal Hex
2.0mmL Zone Mini-threads
1-72UNF Internal Thread
HA
Double-lead Buttress Threads
• Internal connection with 1.5mm long hex & internal bevel• Tapered body allows insertion using Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill)• Surface options: SBM (Soluble Blast Media) textured or HA-coated• Double-lead “V” threads for 2X faster insertion & quadruple-lead threads near top for increased thread engagement & reduced stress• 2mm extender retained by cover screw for use as a healing collar for one stage surgery• Two self-tapping grooves, extending halfway up implant
Cover Screw
Legacy1 Implant System Features & Benefits
Placing Implant with Carrier
Suture soft tissue around extender
Legacy1 Packaging
Carrier/Transfer
Color coded titanium carrier
Use indents on carrier to align implant hex
Attach cover screw and extender to implant
Extender
Legacy1
3.5mmD Platform
3.7mmD Implant
3.5mmD Platform
4.2mmD Implant
4.5mmD Platform
4.7mmD Implant
5.7mmD Implant
5.7mmDPlatform
6
SBM Code Price HA Code Price Diameter Length Platform805708 $150.00 815708 $175.00 5.7mmD 8mmL 5.7mmD805710 $150.00 815710 $175.00 5.7mmD 10mmL 5.7mmD805711 $150.00 815711 $175.00 5.7mmD 11.5mmL 5.7mmD805713 $150.00 815713 $175.00 5.7mmD 13mmL 5.7mmD805716 $150.00 815716 $175.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform804708 $150.00 814708 $175.00 4.7mmD 8mmL 4.5mmD804710 $150.00 814710 $175.00 4.7mmD 10mmL 4.5mmD804711 $150.00 814711 $175.00 4.7mmD 11.5mmL 4.5mmD804713 $150.00 814713 $175.00 4.7mmD 13mmL 4.5mmD804716 $150.00 814716 $175.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform803708 $150.00 813708 $175.00 3.7mmD 8mmL 3.5mmD803710 $150.00 813710 $175.00 3.7mmD 10mmL 3.5mmD803711 $150.00 813711 $175.00 3.7mmD 11.5mmL 3.5mmD803713 $150.00 813713 $175.00 3.7mmD 13mmL 3.5mmD803716 $150.00 813716 $175.00 3.7mmD 16mmL 3.5mmD
Legacy1: Two-Piece Implant for Two-Stage Surgery
Legacy1
803708 803710 803713 803716803711813708 813710 813713 813716813711
7
SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer
3.7mmD
4.7mmD
805708 805710 805713 805716805711815708 815710 815713 815716815711
5.7mmD
SBM Code Price HA Code Price Diameter Length Platform804208 $150.00 814208 $175.00 4.2mmD 8mmL 3.5mmD804210 $150.00 814210 $175.00 4.2mmD 10mmL 3.5mmD804211 $150.00 814211 $175.00 4.2mmD 11.5mmL 3.5mmD804213 $150.00 814213 $175.00 4.2mmD 13mmL 3.5mmD804216 $150.00 814216 $175.00 4.2mmD 16mmL 3.5mmD
804208 804210 804213 804216804211814208 814210 814213 814216814211
4.2mmD
804708 804710 804713 804716804711814708 814710 814713 814716814711
3.5mmD Platform
Legacy2 Implant System Features & Benefits
Legacy2 Packaging
Carrier/ Transfer
Extender
Legacy2
3.7mmD Implant
5.7mmD Implant
5.7mmDPlatform
8
4.2mmD Implant
4.7mmD Implant
• Internal connection with 1.5mm long hex & internal lead-in bevel• Body is straight for top 1/3rd with bottom 2/3rds tapered for bone expansion. Surgically compatible with Tapered Screw-Vent® drills (except the 5.7mmD Implant uses 5.4/4.8mmD Step Drill)• Surface options: SBM (Soluble Blast Media) textured or HA-coated• Double-lead buttress threads for improved insertion & quadruple-lead threads near top for increased thread engagement & reduced stress• 2mm extender retained by cover screw for use as a healing collar for one stage surgery• Color-coded carrier usable as a closed-tray transfer & temporary abutment • Three aggressive self-tapping grooves extending 2/3rds length up the implant
3.5mmD Platform
4.5mmD Platform
7.0mmD Implant
5.7mmDPlatform
Cover Screw
5.2mmD Implant
4.5mmD Platform
3.0mmD Platform
3.2mmD Implant
All-in-1 PackagingIncludes implant, cover screw, healing collar & fixture-mount that functions as transfer and temporary abutment– $175 SBM, $200 HA
NEW simplyLegacy includes mount-free implant, cover screw & 3mm healing collar – $195 SBM, $175 if SMART PACK purchased at same time
Two Packaging Options
SBM Code Price HA Code Price Diameter Length Platform823208 $175.00 833208 $200.00 3.2mmD 8mmL 3.0mmD823210 $175.00 833210 $200.00 3.2mmD 10mmL 3.0mmD823211 $175.00 833211 $200.00 3.2mmD 11.5mmL 3.0mmD823213 $175.00 833213 $200.00 3.2mmD 13mmL 3.0mmD823216 $175.00 833216 $200.00 3.2mmD 16mmL 3.0mmD
9
SBM Code Price HA Code Price Diameter Length Platform825706 $175.00 835706 $200.00 5.7mmD 6mmL 5.7mmD825708 $175.00 835708 $200.00 5.7mmD 8mmL 5.7mmD825710 $175.00 835710 $200.00 5.7mmD 10mmL 5.7mmD825711 $175.00 835711 $200.00 5.7mmD 11.5mmL 5.7mmD825713 $175.00 835713 $200.00 5.7mmD 13mmL 5.7mmD825716 $175.00 835716 $200.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform824206 $175.00 834206 $200.00 4.2mmD 6mmL 3.5mmD824208 $175.00 834208 $200.00 4.2mmD 8mmL 3.5mmD824210 $175.00 834210 $200.00 4.2mmD 10mmL 3.5mmD824211 $175.00 834211 $200.00 4.2mmD 11.5mmL 3.5mmD824213 $175.00 834213 $200.00 4.2mmD 13mmL 3.5mmD824216 $175.00 834216 $200.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform824706 $175.00 834706 $200.00 4.7mmD 6mmL 4.5mmD824708 $175.00 834708 $200.00 4.7mmD 8mmL 4.5mmD824710 $175.00 834710 $200.00 4.7mmD 10mmL 4.5mmD824711 $175.00 834711 $200.00 4.7mmD 11.5mmL 4.5mmD824713 $175.00 834713 $200.00 4.7mmD 13mmL 4.5mmD824716 $175.00 834716 $200.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform823706 $175.00 833706 $200.00 3.7mmD 6mmL 3.5mmD823708 $175.00 833708 $200.00 3.7mmD 8mmL 3.5mmD823710 $175.00 833710 $200.00 3.7mmD 10mmL 3.5mmD823711 $175.00 833711 $200.00 3.7mmD 11.5mmL 3.5mmD823713 $175.00 833713 $200.00 3.7mmD 13mmL 3.5mmD823716 $175.00 833716 $200.00 3.7mmD 16mmL 3.5mmD
825708 825710 825713 825716825711
Legacy2: Two-Piece Implant for Two-Stage Surgery
Legacy2SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
824708 824710 824713 824716824711834708
824706834706 834710 834713 834716834711
835708825706835706 835710 835713 835716835711
SBM Code Price HA Code Price Diameter Length Platform827006 $175.00 837006 $200.00 7.0mmD 6mmL 5.7mmD827008 $175.00 837008 $200.00 7.0mmD 8mmL 5.7mmD827010 $175.00 837010 $200.00 7.0mmD 10mmL 5.7mmD827011 $175.00 837011 $200.00 7.0mmD 11.5mmL 5.7mmD827013 $175.00 837013 $200.00 7.0mmD 13mmL 5.7mmD
827008837008
827010837010
827013837013
827011837011
3.7mmD
824208 824210 824213 824216824211834208
824206834206 834210 834213 834216834211
4.2mmD
4.7mmD
5.7mmD
7.0mmD
SBM Code Price HA Code Price Diameter Length Platform825206 $175.00 835206 $200.00 5.2mmD 6mmL 4.5mmD825208 $175.00 835208 $200.00 5.2mmD 8mmL 4.5mmD825210 $175.00 835210 $200.00 5.2mmD 10mmL 4.5mmD825211 $175.00 835211 $200.00 5.2mmD 11.5mmL 4.5mmD825213 $175.00 835213 $200.00 5.2mmD 13mmL 4.5mmD825216 $175.00 835216 $200.00 5.2mmD 16mmL 4.5mmD
825208 825210 825213 825216825211835208 835210 835213 835216835211
5.2mmD
823208 823210 823213 823216823211
3.2mmD
833208 833210 833213 833216833211
823708833708
823706833706
823710833710
823713833713
823716833716
823711833711
825206835206
827006837006
Cover Screw
Legacy3 Packaging
Carrier/ Transfer
Extender
• Internal connection with 1.5mm long hex & internal lead-in bevel• Tapered body allows insertion using Tapered Screw-Vent® drills for 3.7mmD, 4.2mmD & 4.7mmD implants only • Surface options: SBM (Soluble Blast Media) textured or HA-coated• Double-lead buttress threads for improved insertion & initial stability, quadruple-lead threads near top for increased thread engagement & reduced stress• 2mm extender retained by cover screw for use as a healing collar or for one or two-stage surgery• Color-coded carrier usable as a closed-tray transfer and/or final full-contour abutment• Two self-tapping grooves, extending halfway up implant
Legacy3
3.0mmD Platform
3.2mmD Implant
4.7mmDImplant
4.5mmDPlatform
3.7mmD Implant
4.2mmD Implant
3.5mmD Platform
3.5mmD Platform
5.7mmDImplant
5.7mmDPlatform
5.2mmD Implant
4.5mmD Platform
Legacy3 Implant System Features & Benefits
10
7.0mmDImplant
5.7mmDPlatform
All-in-1 PackagingIncludes implant, cover screw, healing collar & fixture-mount that functions as transfer and final preparable abutment– $200 SBM, $225 HA
NEW simplyLegacy includes mount-free implant, cover screw & 3mm healing collar – $195 SBM, $175 if SMART PACK purchased at same time
Two Packaging Options
SBM Code Price HA Code Price Diameter Length Platform855706 $200.00 865706 $225.00 5.7mmD 6mmL 5.7mmD855708 $200.00 865708 $225.00 5.7mmD 8mmL 5.7mmD855710 $200.00 865710 $225.00 5.7mmD 10mmL 5.7mmD855711 $200.00 865711 $225.00 5.7mmD 11.5mmL 5.7mmD855713 $200.00 865713 $225.00 5.7mmD 13mmL 5.7mmD855716 $200.00 865716 $225.00 5.7mmD 16mmL 5.7mmD
855708 865708
855706 865706
855710 865710
855713 865713
855716 865716
855711 865711
SBM Code Price HA Code Price Diameter Length Platform854206 $200.00 864206 $225.00 4.2mmD 6mmL 3.5mmD854208 $200.00 864208 $225.00 4.2mmD 8mmL 3.5mmD854210 $200.00 864210 $225.00 4.2mmD 10mmL 3.5mmD854211 $200.00 864211 $225.00 4.2mmD 11.5mmL 3.5mmD854213 $200.00 864213 $225.00 4.2mmD 13mmL 3.5mmD854216 $200.00 864216 $225.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform855206 $200.00 865206 $225.00 5.2mmD 6mmL 4.5mmD855208 $200.00 865208 $225.00 5.2mmD 8mmL 4.5mmD855210 $200.00 865210 $225.00 5.2mmD 10mmL 4.5mmD855211 $200.00 865211 $225.00 5.2mmD 11.5mmL 4.5mmD855213 $200.00 865213 $225.00 5.2mmD 13mmL 4.5mmD855216 $200.00 865216 $225.00 5.2mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform854706 $200.00 864706 $225.00 4.7mmD 6mmL 4.5mmD854708 $200.00 864708 $225.00 4.7mmD 8mmL 4.5mmD854710 $200.00 864710 $225.00 4.7mmD 10mmL 4.5mmD854711 $200.00 864711 $225.00 4.7mmD 11.5mmL 4.5mmD854713 $200.00 864713 $225.00 4.7mmD 13mmL 4.5mmD854716 $200.00 864716 $225.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform853706 $200.00 863706 $225.00 3.7mmD 6mmL 3.5mmD853708 $200.00 863708 $225.00 3.7mmD 8mmL 3.5mmD853710 $200.00 863710 $225.00 3.7mmD 10mmL 3.5mmD853711 $200.00 863711 $225.00 3.7mmD 11.5mmL 3.5mmD853713 $200.00 863713 $225.00 3.7mmD 13mmL 3.5mmD853716 $200.00 863716 $225.00 3.7mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform853208 $200.00 863208 $225.00 3.2mmD 8mmL 3.0mmD853210 $200.00 863210 $225.00 3.2mmD 10mmL 3.0mmD853211 $200.00 863211 $225.00 3.2mmD 11.5mmL 3.0mmD853213 $200.00 863213 $225.00 3.2mmD 13mmL 3.0mmD853216 $200.00 863216 $225.00 3.2mmD 16mmL 3.0mmD
Legacy3: Two-Piece Implant for Two-Stage Surgery
Legacy3
855208 865208
855206 865206
855210 865210
855213 865213
855216 865216
855211 865211
854708 864708
854706 864706
854710 864710
854713 864713
854716 864716
854711 864711
853706 863706
853708 863708
853710 863710
853713 863713
853716 863716
853711 863711
853208 863208
853210 863210
853213 863213
853216 863216
853211 863211
SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
SBM Code Price HA Code Price Diameter Length Platform857006 $200.00 867006 $225.00 7.0mmD 6mmL 5.7mmD857008 $200.00 867008 $225.00 7.0mmD 8mmL 5.7mmD857010 $200.00 867010 $225.00 7.0mmD 10mmL 5.7mmD857011 $200.00 867011 $225.00 7.0mmD 11.5mmL 5.7mmD857013 $200.00 867013 $225.00 7.0mmD 13mmL 5.7mmD
857008 867008
857006 867006
857010 867010
857013 867013
857011 867011
11
3.7mmD
854208 864208
854206 864206
854210 864210
854213 864213
854216 864216
854211 864211
4.2mmD
4.7mmD
5.7mmD
7.0mmD
5.2mmD
3.2mmD
3.5mmD Platform
Legacy4 Implant System Features & Benefits
Legacy4 Packaging
Carrier/Transfer
3.5mmDPlatform873713
13mmLength
Extender
Legacy4
3.7mmD Implant
5.7mmD Implant
5.7mmDPlatform
12
4.2mmD Implant
4.7mmD Implant
3.5mmD Platform
4.5mmD Platform
7.0mmD Implant
5.7mmDPlatform
Cover Screw
5.2mmD Implant
4.5mmD Platform
3.0mmD Platform
3.2mmD Implant
• Revolutionary new, two-piece fixture-mount. Top includes torque-safety feature and detaches in impression for metal- to-metal transfer accuracy• Fixture-mount may be shortened at the line to function as a final preparable abutment• 2mm extender retained by cover screw for use as a healing collar for one-stage surgery features a concave transgingival profile which matches the fixture-mount• Internal connection with 1.5mm long hex & internal lead-in bevel• Body is straight for top 1/3rd with bottom 2/3rds tapered for bone expansion. Surgically-compatible with Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill)• Double-lead buttress threads for improved insertion and quadruple-lead threads near top for increased thread engagement & reduced stress• Surface options: SBM (Soluble Blast Media) textured or HA-coated• Three aggressive self-tapping grooves extend 2/3rds length up the implant
SBM Code Price HA Code Price Diameter Length Platform873208 $225.00 883208 $250.00 3.2mmD 8mmL 3.0mmD873210 $225.00 883210 $250.00 3.2mmD 10mmL 3.0mmD873211 $225.00 883211 $250.00 3.2mmD 11.5mmL 3.0mmD873213 $225.00 883213 $250.00 3.2mmD 13mmL 3.0mmD873216 $225.00 883216 $250.00 3.2mmD 16mmL 3.0mmD
13
SBM Code Price HA Code Price Diameter Length Platform875706 $225.00 885706 $250.00 5.7mmD 6mmL 5.7mmD875708 $225.00 885708 $250.00 5.7mmD 8mmL 5.7mmD875710 $225.00 885710 $250.00 5.7mmD 10mmL 5.7mmD875711 $225.00 885711 $250.00 5.7mmD 11.5mmL 5.7mmD875713 $225.00 885713 $250.00 5.7mmD 13mmL 5.7mmD875716 $225.00 885716 $250.00 5.7mmD 16mmL 5.7mmD
SBM Code Price HA Code Price Diameter Length Platform874206 $225.00 884206 $250.00 4.2mmD 6mmL 3.5mmD874208 $225.00 884208 $250.00 4.2mmD 8mmL 3.5mmD874210 $225.00 884210 $250.00 4.2mmD 10mmL 3.5mmD874211 $225.00 884211 $250.00 4.2mmD 11.5mmL 3.5mmD874213 $225.00 884213 $250.00 4.2mmD 13mmL 3.5mmD874216 $225.00 884216 $250.00 4.2mmD 16mmL 3.5mmD
SBM Code Price HA Code Price Diameter Length Platform874706 $225.00 884706 $250.00 4.7mmD 6mmL 4.5mmD874708 $225.00 884708 $250.00 4.7mmD 8mmL 4.5mmD874710 $225.00 884710 $250.00 4.7mmD 10mmL 4.5mmD874711 $225.00 884711 $250.00 4.7mmD 11.5mmL 4.5mmD874713 $225.00 884713 $250.00 4.7mmD 13mmL 4.5mmD874716 $225.00 884716 $250.00 4.7mmD 16mmL 4.5mmD
SBM Code Price HA Code Price Diameter Length Platform873706 $225.00 883706 $250.00 3.7mmD 6mmL 3.5mmD873708 $225.00 883708 $250.00 3.7mmD 8mmL 3.5mmD873710 $225.00 883710 $250.00 3.7mmD 10mmL 3.5mmD873711 $225.00 883711 $250.00 3.7mmD 11.5mmL 3.5mmD873713 $225.00 883713 $250.00 3.7mmD 13mmL 3.5mmD873716 $225.00 883716 $250.00 3.7mmD 16mmL 3.5mmD
874208 874210 874213 874216874211
875708 875710 875713 875716875711
Legacy4: Two-Piece Implant for Two-Stage Surgery
Legacy4SBM and HA Surface Implants Includes Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6mmL implant
874708 874710 874713 874716874711
884208874206884206 884210 884213 884216884211
884708874706884706 884710 884713 884716884711
885708875706885706 885710 885713 885716885711
SBM Code Price HA Code Price Diameter Length Platform877006 $225.00 887006 $250.00 7.0mmD 6mmL 5.7mmD877008 $225.00 887008 $250.00 7.0mmD 8mmL 5.7mmD877010 $225.00 887010 $250.00 7.0mmD 10mmL 5.7mmD877011 $225.00 887011 $250.00 7.0mmD 11.5mmL 5.7mmD877013 $225.00 887013 $250.00 7.0mmD 13mmL 5.7mmD
877008887008
877010887010
877013887013
877011887011
3.7mmD
4.2mmD
4.7mmD
5.7mmD
7.0mmD
SBM Code Price HA Code Price Diameter Length Platform875206 $225.00 885206 $250.00 5.2mmD 6mmL 4.5mmD875208 $225.00 885208 $250.00 5.2mmD 8mmL 4.5mmD875210 $225.00 885210 $250.00 5.2mmD 10mmL 4.5mmD875211 $225.00 885211 $250.00 5.2mmD 11.5mmL 4.5mmD875213 $225.00 885213 $250.00 5.2mmD 13mmL 4.5mmD875216 $225.00 885216 $250.00 5.2mmD 16mmL 4.5mmD
875208 875210 875213 875216875211885208 885210 885213 885216885211
5.2mmD
873208 873210 873213 873216873211
3.2mmD
883208 883210 883213 883216883211
873708883708
873706883706
873710883710
873713883713
873716883716
873711883711
875206885206
877006887006
14
Legacy Labeling: Definitions & Descriptions
8037
13Legacy™
1 Im
plant
XXXX
X
(XX)XX
XXXX
XXXX
XXXX
(XX)XX
XXXX
(XX)XX
XXX
803713Legacy™1 Implant
SBM®
Use by dateXXXX-XX-XX
Do not re-useConsult instructions for use
Do not open if damaged
Size: 3.7mmD x 13mmL, Qty: 1
3.5mmD Platform
Made in USA
8037
13Legacy™
1 Im
plant
XXXX
X
Legacy Implant Vial and Cap Label
1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Item quantity 6) Product dimensions 7) Use by date (XXXX-XX) 8) Tamper proof symbol 9) Refer to Instructions For Use (IFU) 10) Do not re-use symbol 11) Sterilized using gamma irradiation symbol 12) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 13) Country of origin 14) Unique Device Identification (UDI) barcode and text 15) Lot number (XXXXXX) 16) Implant prosthetic platform diameter (written and color-coded) 17) Implant body diameter color reference on surgical tray 18) Non-sterile symbol
3
1
6
7
9
80 = Legacy1 SBM37 = 3.7mmD body diameter13 = 13mmL body length
8035
-47Legacy™
Abu
tment
XXXX
X
(XX)XX
XXXX
XXXX
XXXX
(XX)XX
XXXX
(XX)XX
XXX
8035-47
Legacy™ Plastic EngagingTemporary AbutmentIncludes: Fixation Screw [1000-06]
Do not re-use
Consult instructions for use
Do not open if damaged
Size: Platform: 3.5mm Qty: 1
Made in USA
8035
-47Legacy™
Abu
tment
XXXX
X
Legacy Prosthetic Vial and Cap Label
8035-47
80 = Legacy prosthetics 35 = 3.5mmD platform diameter -47= prosthetic specific code
2
13
16
8
5
12
17
15
14
10
11
3
1
818
10
2
4
16
4
5
6
9
12 13
1615
14
15
The implant is mounted on a color-coded Carrier/Transfer. A cover screw and extender are included in each vial.
Drop implant assembly out of vial onto a sterile surface
Remove implant assembly with insertion tool & drill or ratchet
Each cap label is color coded by platform diameter of implant
All the implants come in a sterile vial
Each vial label is color-coded with two tear-off labels
Prepare surgical site with double cutting step drill
Insert implant into osteotomy Index fixture-mount flat to labial
Remove the holder containing the cover screw & extender
Align the flat of the fixture mount to the labial
Unscrew the cover screw & extender
Remove fixture-mount
Attach the cover screw to implant
Suture soft tissue over cover screw
Attach the cover screw & extender to implant
Suture soft tissue around cover screw & extender
Legacy Fixture-Mount Packaging
Legacy Selection Chart
8035-31 8035-32
8035-31C8035-32C
8035-51 8035-52
3.5mmD Platform3.0mmD Platform
8530-01 8530-138530-15
8530-21 8530-22 8530-23
3037-26
8537-02
85378035-21 8035-22 8035-23
8035-408035-41
8035-44
8530-618530-62-15S8530-63-15S
8035-72
8530-31 8530-32
8530-31C8530-32C
8530-51 8530-52
8530-51-15C 8530-52-15C
8530-51-08C 8530-52-08C
8530-4118530-40 8530-46 8530-47
*8730-478530-49
8035-91-L
8530-05 8530-08 8530-06 8035-01 8035-138035-15
Fixture-Mount
8530-91-L 8530-92-L
16 *concave profile1Non-engaging
Cover Screws, Healing Collars, Implant Transfers, Analogs
& Scan Adapters
Straight Abutments, Comfort Caps, Transfers & Analogs
Temporary & Customizable Abutments
Ball, LOCATOR® & Screw-Receiving Overdenture
Abutments
Straight & Angled Contoured & HLA Abutments
8530-63-30S8530-64-30S
8530-62 8530-64
8530-93-L 8530-94-L
8035-62-15S8035-63-15S 8035-64-15S
8035-63-30S8035-64-30S 8035-65-30S
8035-90-L8530-95-L
8530-30CB 8035-30CB
8530-09P
4.5mmD Platform 5.7mmD Platform
Fixture-Mount
3047-26
3047-02
30478045-21 8045-22 8045-23
3057-26
3057-02
3057
3065-028057-21 8057-22 8057-23
3065-26
3065
8057-318057-32
8057-518057-52
HLA5-6HLA5-7
8045-31 8045-32
8045-31C8045-32C
8045-51 8045-52
8045-51-08C 8045-52-08C
8045-51-15C 8045-52-15C
HLA4-5 HLA4-6
8035-51-08C 8035-52-08C
8035-51-15C 8035-52-15C
HLA3-4 HLA3-5
8035-46 8035-47*8735-47
8035-49 8045-408045-411
8045-44 8045-46 8045-47*8745-47
8045-49 8057-40 8057-44 8057-46 8057-49
8035-62 8035-64
8035-74
8035-94-L 8035-95-L
8045-61 8045-62 8045-64
8045-72 8045-74
8045-91-L 8045-93-L8045-92-L
8045-62-15S8045-63-15S8045-64-15S
8045-94-L 8045-95-L
8057-61 8057-62 8057-64
8057-72 8057-74
8057-91-L 8057-93-L8057-92-L 8057-94-L 8057-95-L
8035-05 8035-08 8035-06 8045-01 8045-138045-15
8045-05 8045-08 8045-06 8057-01 8057-138057-15
8057-05 8057-08 8057-06
Fixture-Mount
8035-61
8035-92-L 8035-93-L
8057-47*8757-47
8045-63-30S8045-64-30S8045-65-30S
Fixture-Mount
17
8045-90-L
8035-09P 8045-09P 8057-09P
8045-30CB
†non-engaging*8035-01S, 8045-01S, 8057-01S for 6mmL implants only
8730-21 8730-22 8730-23
8730-08 8730- 08NE
85378730-05
8530-01
8730-12 8730-13 8730-15
3.0mmD Platform
Transfers & Abutment Analogs
Healing Collars
Cover Screw, Implant Analog & Scan Adapter
Overdenture Abutments
Straight Abutments
18
Selection Chart: Concave Prosthetics
Fixture-Mount
8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L
8730-17
8530-06
8730(for Legacy4
Fixture Mount)
8537-02 3037-26
8530-09P
8735-21N 8735-22N 8735-23N
8735-12N 8735-13N 8735-15N
19
3.5mmD Platform
8035-90-L8035-91-L 8035-92-L8035-93-L8035-94-L8035-95-L
8735-08N8735-08NNE†
8735-05N 8735-088735-08NE†
8735-05 8747S8537
Fixture-Mount
8735-17N
8735-21 8735-22 8735-23
8735-12 8735-13 8735-15
8035-06
8537-023037-26
8747-023047-26
8735(for Legacy4
Fixture Mount)
8035-01 8035-01S*
8035-09P
†non-engaging*6530-01S and 6534-01S for 6mmL implants only
4.5mmD Platform
Transfers & Abutment Analogs
Healing Collars
Cover Screw, Implant Analog & Scan Adapter
Overdenture Abutments
Straight Abutments
20
Selection Chart: Concave Prosthetics
8745-21N 8745-22N 8745-23N
8745-12N 8745-13N 8745-15N
8045-90-L8045-91-L 8045-92-L 8045-93-L8045-94-L8045-95-L
8745-08N8745-08NNE†
8745-05N 8745-088745-08NE†
8745-05 8757S3047
Fixture-Mount
8745-17N
8745-21 8745-22 8745-23
8745-12 8745-13 8745-15
8045-068045-01 8045-01S*
3047-023047-26
8757-023057-26
8745(for Legacy4
Fixture Mount)
8045-09P
8757-21N 8757-22N 8757-23N
8757-12N 8757-13N 8757-15N
21
5.7mmD Platform
8057-91-L 8057-92-L 8057-93-L8057-94-L8057-95-L
8757-08N8757-08NNE†
8757-05N 8757-088757-08NE†
8757-05 8765S3057
Fixture-Mount
8757-17N
8757-21 8757-22 8757-23
8757-12 8757-13 8757-15
8057-06
3057-023057-26
8765-023065-26
8757(for Legacy4
Fixture Mount)
8057-01 8057-01S*
8057-09P
22
Code Description Price (includes two pieces)
1000-20S For 3.0mmD hexagon platform $39.001000-20 For 3.0mmD hexagon platform $39.001000-41 For 3.0mmD hexagon platform $39.001000-26 For 3.0mmD hexagon platform $39.00
1000-26XL For 3.0mmD hexagon platform $39.001000-01S For 3.5, 4.5 & 5.7mmD hexagon platforms $39.001000-01 For 3.5, 4.5 & 5.7mmD hexagon platforms $39.001000-06 For 3.5, 4.5 & 5.7mmD hexagon platforms $39.001000-10 For 3.5, 4.5 & 5.7mmD hexagon platforms $39.00
1000-10XL For 3.5, 4.5 & 5.7mmD hexagon platforms $39.00
Cover Screws, Healing Collars, Transfers & Analogs
Code Platform Replacement Screw Price 8530-05 3.0mmD 1000-41 $35.00 8035-05 3.5mmD 1000-06 $35.00 8045-05 4.5mmD 1000-06 $35.00 8057-05 5.7mmD 1000-06 $35.00
Code Platform Price8530-06 3.0mmD $25.008035-06 3.5mmD $25.008045-06 4.5mmD $25.008057-06 5.7mmD $25.00
Implant Analogs
Code Code [*for 6mmL Only] Platform Price 8530-01 - 3.0mmD $20.00 8035-01 8035-01S 3.5mmD $20.00 8045-01 8045-01S 4.5mmD $20.00 8057-01 8057-01S 5.7mmD $20.00
Code Platform Replacement Screw Price 8530-08 3.0mmD 1000-26 $35.00 8035-08 3.5mmD 1000-10 $35.00 8045-08 4.5mmD 1000-10 $35.00 8057-08 5.7mmD 1000-10 $35.00
Open-Tray Implant Transfers Price includes Fixation Screw with 1.25mmD Hex
1000-10 8035-08 8045-08 8057-088530-081000-26
Closed-Tray Implant Transfers Price includes Fixation Screw with 1.25mmD Hex
1000-061000-41 8035-05 8045-05 8057-058530-05
Replacement Fixation Screws
Requires 1.25mmD Hex Tool Surgical Cover Screws
8035-01 *8035-01S
8530-01 8057-01 *8057-01S
8045-01 *8045-01S
Requires 1.25mmD Hex Tool
1000-061000-01 1000-101000-26
Open-Tray Transfer &
Waxing Screw
1000-20
3.0mmD Hex Platform
1000-41
Closed-Tray Transfer & Temporary Abutment
Abutments
8057-068045-068530-06 8035-06
1000-01S1000-20S
Short Angled Screw-Receiving
Abutments
Short Angled Screw-Receiving
Abutments
Abutments
Closed-Tray Transfer & Temporary Abutment
Open-Tray Transfer &
Waxing Screw
1000-26XL
Waxing Screw
1000-10XL
Waxing Screw
23
Healing Collars
Code Platform Width Length Price 8730-12 3.0mmD 3.8mmD 2mmL $39.00 8730-13 3.0mmD 3.8mmD 3mmL $39.00 8730-15 3.0mmD 3.8mmD 5mmL $39.00 8730-17 3.0mmD 3.8mmD 7mmL $39.00 8735-12 3.5mmD 4.8mmD 2mmL $39.00 8735-13 3.5mmD 4.8mmD 3mmL $39.00 8735-15 3.5mmD 4.8mmD 5mmL $39.00 8745-12 4.5mmD 5.8mmD 2mmL $39.00 8745-13 4.5mmD 5.8mmD 3mmL $39.00 8745-15 4.5mmD 5.8mmD 5mmL $39.00 8757-12 5.7mmD 6.6mmD 2mmL $39.00 8757-13 5.7mmD 6.6mmD 3mmL $39.00 8757-15 5.7mmD 6.6mmD 5mmL $39.00
8730-12 8735-12 8745-12 8757-12
8730-13 8735-13 8745-13 8757-13
Requires 1.25mmD Hex Tool Healing Collars-Concave Profile
8730-15 8735-15 8745-15 8757-15
8730-17
Code Platform Width Length Price 8735-12N 3.5mmD 3.8mmD 2mmL $39.00 8735-13N 3.5mmD 3.8mmD 3mmL $39.00 8735-15N 3.5mmD 3.8mmD 5mmL $39.00 8735-17N 3.5mmD 3.8mmD 7mmL $39.00 8745-12N 4.5mmD 4.8mmD 2mmL $39.00 8745-13N 4.5mmD 4.8mmD 3mmL $39.00 8745-15N 4.5mmD 4.8mmD 5mmL $39.00 8745-17N 4.5mmD 4.8mmD 7mmL $39.00 8757-12N 5.7mmD 5.8mmD 2mmL $39.00 8757-13N 5.7mmD 5.8mmD 3mmL $39.00 8757-15N 5.7mmD 5.8mmD 5mmL $39.00 8757-17N 5.7mmD 5.8mmD 7mmL $39.00
Requires 1.25mmD Hex Tool Narrow Healing Collars-Concave Profile
8735-12N 8745-12N 8757-12N
8735-13N 8745-13N 8757-13N
8735-15N 8745-15N 8757-15N
8735-17N 8745-17N 8757-17N
Code Platform Width Length Price 8530-13 3.0mmD 3.8mmD 3mmL $39.00 8530-15 3.0mmD 3.8mmD 5mmL $39.00 8035-13 3.5mmD 4.8mmD 3mmL $39.00 8035-15 3.5mmD 4.8mmD 5mmL $39.00 8045-13 4.5mmD 5.8mmD 3mmL $39.00 8045-15 4.5mmD 5.8mmD 5mmL $39.00 8057-13 5.7mmD 6.6mmD 3mmL $39.00 8057-15 5.7mmD 6.6mmD 5mmL $39.00
8530-13 8035-13 8045-13 8057-13
8530-15 8035-15 8045-15 8057-15
Requires 1.25mmD Hex Tool Healing Collars
Narrow Closed-Tray Implant Transfers- Concave Profile
Price includes Fixation Screw with 1.25mmD Hex
Transfers: Concave Prosthetics
Code Platform Replacement Screw Price 8730-05 3.0mmD 1000-41 $35.00 8735-05 3.5mmD 1000-06 $35.00 8745-05 4.5mmD 1000-06 $35.00 8757-05 5.7mmD 1000-06 $35.00
Closed-Tray Implant Transfers-Concave Profile
1000-06 8735-05 8745-05 8757-058730-05
Code Platform Replacement Screw Price8730-08 3.0mmD 1000-26 $35.008735-08 3.5mmD 1000-10 $35.008745-08 4.5mmD 1000-10 $35.008757-08 5.7mmD 1000-10 $35.00
Open-Tray Implant Transfers-Concave Profile Price includes Fixation Screw with 1.25mmD Hex
1000-10 8735-08 8745-08 8757-088730-08
Code Platform Replacement Screw Price8735-08N 3.5mmD 1000-10 $35.008745-08N 4.5mmD 1000-10 $35.008757-08N 5.7mmD 1000-10 $35.00
Narrow Open-Tray Implant Transfers-Concave Profile
Price includes Fixation Screw with 1.25mmD Hex
1000-10 8735-08N 8745-08N 8757-08N
Code Platform Replacement Screw Price8730-08NE 3.0mmD 1000-26 $35.008735-08NE 3.5mmD 1000-10 $35.008745-08NE 4.5mmD 1000-10 $35.008757-08NE 5.7mmD 1000-10 $35.00
Non-Engaging Open-Tray Implant Transfers-Concave Profile
Price includes Fixation Screw with 1.25mmD Hex
1000-10 8735-08NE 8745-08NE 8757-08NE
Code Platform Replacement Screw Price8735-08NNE 3.5mmD 1000-10 $35.008745-08NNE 4.5mmD 1000-10 $35.008757-08NNE 5.7mmD 1000-10 $35.00
Narrow Non-Engaging Open-Tray Implant Transfers-Concave Profile
Price includes Fixation Screw with 1.25mmD Hex
1000-10 8735-08NNE 8745-08NNE 8757-08NNE
Code Platform Replacement Screw Price 8735-05N 3.5mmD 1000-06 $35.00 8745-05N 4.5mmD 1000-06 $35.00 8757-05N 5.7mmD 1000-06 $35.00
1000-06 8735-05N 8745-05N 8757-05N
1000-26
Price includes Fixation Screw with 1.25mmD Hex
1000-41
24
8730-08NE1000-26
simplycrown & bridge SMART PACKS-Concave Profile
Code Platform Abutment Height Collar Heights Use Analog Price 8730-21 3.0mmD 5.5mm 1.0mm 8537 $125.00 8730-22 3.0mmD 5.5mm 2.0mm 8537 $125.00 8730-23 3.0mmD 5.5mm 3.0mm 8537 $125.00 8735-21 3.5mmD 4.0mm 1.0mm 8747S $125.00 8735-21N 3.5mmD 5.5mm 1.0mm 8537 $125.00 8735-22 3.5mmD 4.0mm 2.0mm 8747S $125.00 8735-22N 3.5mmD 5.5mm 2.0mm 8537 $125.00 8735-23 3.5mmD 4.0mm 3.0mm 8747S $125.00 8735-23N 3.5mmD 5.5mm 3.0mm 8537 $125.00 8745-21 4.5mmD 4.0mm 1.0mm 8757S $125.00 8745-21N 4.5mmD 5.5mm 1.0mm 3047 $125.00 8745-22 4.5mmD 4.0mm 2.0mm 8757S $125.00 8745-22N 4.5mmD 5.5mm 2.0mm 3047 $125.00 8745-23 4.5mmD 4.0mm 3.0mm 8757S $125.00 8745-23N 4.5mmD 5.5mm 3.0mm 3047 $125.00 8757-21 5.7mmD 4.0mm 1.0mm 8765S $125.00 8757-21N 5.7mmD 5.5mm 1.0mm 3057 $125.00 8757-22 5.7mmD 4.0mm 2.0mm 8765S $125.00 8757-22N 5.7mmD 5.5mm 2.0mm 3057 $125.00 8757-23 5.7mmD 4.0mm 3.0mm 8765S $125.00 8757-23N 5.7mmD 5.5mm 3.0mm 3057 $125.00
25
Straight Abutments, Snap-on Transfers & Lab Analogs: Concave Prosthetics
8730-23 8735-22 8745-22 8757-22
8730-22 8735-21N 8745-21N 8757-21N
8730-21 8735-21 8745-21 8757-21
8735-23N 8745-23N 8757-23N
8735-23 8745-23 8757-23
8735-22N 8745-22N 8757-22N
Code Abutment Width Price (includes two pieces)8747-02 4.7mmD $30.008757-02 5.7mmD $30.008765-02 6.5mmD $30.00
Straight Abutment Transfers-Short
8757-02 8765-028747-02
Straight Abutment Analogs-Short
8747S 8757S 8765S
Code Abutment Width Price8747S 4.7mmD $35.008757S 5.7mmD $35.008765S 6.5mmD $35.00
simplycrown & bridge SMART PACK INCLUDES:Straight Abutment with concave profileTransferAnalogCastable CopingComfort CapFixation Screw with 1.25mmL Hex
For use with 4mm height Straight Abutments
For use with 4mm height Straight Abutments
Code Platform Abutment Width Price8730 3.0mmD 3.7mmD $30.008735 3.5mmD 4.7mmD $30.008745 4.5mmD 5.7mmD $30.008757 5.7mmD 6.5mmD $30.00
Straight Abutment Analogs
Straight Abutments
Code Platform Collar Heights Use Analog Price 8530-21 3.0mmD 1.0mm 8537 $100.00 8530-22 3.0mmD 2.0mm 8537 $100.00 8530-23 3.0mmD 3.0mm 8537 $100.00 8035-21 3.5mmD 1.0mm 3047 $100.00 8035-22 3.5mmD 2.0mm 3047 $100.00 8035-23 3.5mmD 3.0mm 3047 $100.00 8045-21 4.5mmD 1.0mm 3057 $100.00 8045-22 4.5mmD 2.0mm 3057 $100.00 8045-23 4.5mmD 3.0mm 3057 $100.00 8057-21 5.7mmD 1.0mm 3065 $100.00 8057-22 5.7mmD 2.0mm 3065 $100.00 8057-23 5.7mmD 3.0mm 3065 $100.00
Straight Abutments, Snap-on Transfers & Lab Analogs
Code Abutment Width Price (includes two pieces)3037-26 3.7mmD $30.003047-26 4.7mmD $30.003057-26 5.7mmD $30.003065-26 6.5mmD $30.00
Code Abutment Width Price (includes two pieces)8537-02 3.7mmD $30.003047-02 4.7mmD $30.003057-02 5.7mmD $30.003065-02 6.5mmD $30.00
Straight Abutment Comfort Caps
3047-26 3057-26 3065-263037-26
Straight Abutment Transfers
3047-02 3057-02 3065-028537-02
Code Abutment Width Price (includes two pieces)3037-28 3.7mmD $30.003047-28 4.7mmD $30.003057-28 5.7mmD $30.003065-28 6.5mmD $30.00
Straight Abutment Castable Coping
3047-28 3057-28 3065-283037-28
3047 3057 30658537
Includes Castable Coping
Includes Transfer, Comfort Cap & Fixation Screw with 1.25mmD Hex
8530-23 8035-23 8045-23 8057-23
8530-22 8035-22 8045-22 8057-22
8530-21 8035-21 8045-21 8057-21
Code Abutment Width Price8537 3.7mmD $35.003047 4.7mmD $35.003057 5.7mmD $35.003065 6.5mmD $35.00
Straight Abutment Analogs - Legacy4
8735 8745 87578730
26
Code Platform Angulation Collar Heights Replacement Screw Price8045-31C 4.5mmD 0° 1mm 1000-01 $120.008045-32C 4.5mmD 0° 2mm 1000-01 $120.00
8045-51-08C 4.5mmD 8° 1mm 1000-01 $140.008045-52-08C 4.5mmD 8° 2mm 1000-01 $140.008045-51-15C 4.5mmD 15° 1mm 1000-01 $140.008045-52-15C 4.5mmD 15° 2mm 1000-01 $140.00
8045-30CB 4.5mmD - .5mm 1000-01 $60.00
Code Platform Angulation Collar Heights Replacement Screw Price8530-31C 3.0mmD 0° 1mm 1000-20 $120.008530-32C 3.0mmD 0° 2mm 1000-20 $120.00
8530-51-08C 3.0mmD 8° 1mm 1000-20 $140.008530-52-08C 3.0mmD 8° 2mm 1000-20 $140.008530-51-15C 3.0mmD 15° 1mm 1000-20 $140.008530-52-15C 3.0mmD 15° 2mm 1000-20 $140.00
8530-30CB 3.0mmD - .5mm 1000-20 $60.00
Code Platform Angulation Collar Heights Replacement Screw Price8035-31C 3.5mmD 0° 1mm 1000-01 $120.008035-32C 3.5mmD 0° 2mm 1000-01 $120.00
8035-51-08C 3.5mmD 8° 1mm 1000-01 $140.008035-52-08C 3.5mmD 8° 2mm 1000-01 $140.008035-51-15C 3.5mmD 15° 1mm 1000-01 $140.008035-52-15C 3.5mmD 15° 2mm 1000-01 $140.00
8035-30CB 3.5mmD - .5mm 1000-01 $60.00
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-31 3.0mmD 1mm 1000-20 $100.008530-32 3.0mmD 2mm 1000-20 $100.008035-31 3.5mmD 1mm 1000-01 $100.008035-32 3.5mmD 2mm 1000-01 $100.008045-31 4.5mmD 1mm 1000-01 $100.008045-32 4.5mmD 2mm 1000-01 $100.008057-31 5.7mmD 1mm 1000-01 $100.008057-32 5.7mmD 2mm 1000-01 $100.00
Straight Titanium Contoured Abutments
Straight & Angled Contoured, Titanium & Zirconia Abutments
8035-31 8045-31 8057-318530-31
8035-32 8045-32 8057-328530-32
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-51 3.0mmD .75mm 1000-20 $120.008530-52 3.0mmD 2mm 1000-20 $120.008035-51 3.5mmD .75mm 1000-01 $120.008035-52 3.5mmD 2mm 1000-01 $120.008045-51 4.5mmD .75mm 1000-01 $120.008045-52 4.5mmD 2mm 1000-01 $120.008057-51 5.7mmD .75mm 1000-01 $120.008057-52 5.7mmD 2mm 1000-01 $120.00
Angled Titanium Contoured Abutments
8035-51 8045-51 8057-518530-51
8035-52 8045-52 8057-528530-52
Price includes Fixation Screw with 1.25mmD Hex0°, 8° & 15° Zirconia Contoured Abutments
8530-52-08C 8530-52-15C8530-32C
8035-51-15C8035-31C
8045-51-08C 8045-51-15C8045-31C
8045-52-08C 8045-52-15C
8530-30CB
8035-30CB
8045-30CB
8530-31C 8530-51-08C 8530-51-15C
8035-32C 8035-52-08C 8035-52-15C
8045-32C
8035-51-08C
27
Code Platform Collar Heights Replacement Screw PriceHLA3-4 3.5mmD - 1000-01 $85.00HLA3-5 3.5mmD - 1000-01 $85.00HLA4-5 4.5mmD - 1000-01 $85.00HLA4-6 4.5mmD - 1000-01 $85.00HLA5-6 5.7mmD - 1000-01 $85.00HLA5-7 5.7mmD - 1000-01 $85.00
Straight Full-Contoured (HLA) Abutments Price includes Fixation Screw with 1.25mmD Hex
HLA3-5 HLA4-6
HLA3-4 HLA4-5
HLA5-7
HLA5-6
Engaging & Non-Engaging, Gold, Plastic & Titanium Abutments
Code Platform Collar Heights Replacement Screw Price8530-40 3.0mmD 1.0mm 1000-20 $135.008035-40 3.5mmD 1.0mm 1000-01 $135.008045-40 4.5mmD 1.0mm 1000-01 $135.008057-40 5.7mmD 1.0mm 1000-01 $135.00
Price includes Fixation Screw with 1.25mmD HexGold Engaging Cast-to Abutments
8530-40 8035-40 8045-40 8057-40
Code Platform Collar Heights Replacement Screw Price8530-47 3.0mmD 1.0mm 1000-41 $40.008035-47 3.5mmD 1.0mm 1000-06 $40.008045-47 4.5mmD 1.0mm 1000-06 $40.008057-47 5.7mmD 1.0mm 1000-06 $40.00
Price includes Fixation Screw with 1.25mmD HexPlastic Engaging Temporary Abutments
8530-47 8035-47 8045-47 8057-47
Code Platform Collar Heights Replacement Screw Price8035-44 3.5mmD - 1000-01 $40.008045-44 4.5mmD - 1000-01 $40.008057-44 5.7mmD - 1000-01 $40.00
Price includes Fixation Screw with 1.25mmD HexPlastic Engaging Castable Abutments
8035-44 8045-44 8057-44
Code Platform Collar Heights Replacement Screw Price8530-41 3.0mmD 1.0mm 1000-20 $135.008035-41 3.5mmD 1.0mm 1000-01 $135.008045-41 4.5mmD 1.0mm 1000-01 $135.00
Price includes Fixation Screw with 1.25mmD HexGold Non-Engaging Cast-to Abutments
8530-41 8035-41 8045-41
Code Platform Collar Heights Replacement Screw Price8730-47 3.0mmD 2.0mm 1000-41 $40.008735-47 3.5mmD 2.0mm 1000-06 $40.008745-47 4.5mmD 2.0mm 1000-06 $40.008757-47 5.7mmD 2.0mm 1000-06 $40.00
Plastic Engaging Temporary Abutments - Concave Profile
8730-47 8735-47 8745-47 8757-47
Price includes Fixation Screw with 1.25mmD Hex
Code Platform Collar Heights Replacement Screw Price8530-49 3.0mmD 1.0mm 1000-20 $40.008035-49 3.5mmD 1.0mm 1000-01 $40.008045-49 4.5mmD 1.0mm 1000-01 $40.008057-49 5.7mmD 1.0mm 1000-01 $40.00
Price includes Fixation Screw with 1.25mmD HexTitanium Non-Engaging Temporary Abutments
8530-49 8035-49 8045-49 8057-49
Code Platform Collar Heights Replacement Screw Price8530-46 3.0mmD - 1000-20 $35.008035-46 3.5mmD - 1000-01 $35.008045-46 4.5mmD - 1000-01 $35.008057-46 5.7mmD - 1000-01 $35.00
Price includes Fixation Screw with 1.25mmD HexPlastic Non-Engaging Castable Abutments
8035-46 8045-46 8057-468530-46
28
29
Scan Adapters & Overdenture Abutments
Includes Transfer & Comfort Cap - requires 1.25mmD Hex Tool
Ball Abutments
Platform 2mmL 4mmL Price3.5mmD 8035-72 8035-74 $90.004.5mmD 8045-72 8045-74 $90.005.7mmD 8057-72 8057-74 $90.00
8035-72 8035-74
8045-72 8045-74
8057-72 8057-74
Platform 0mmL 1mmL 2mmL 3mmL 4mmL 5mmL Price3.0mmD - 8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L $120.003.5mmD 8035-90-L 8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L $120.004.5mmD 8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L $120.005.7mmD - 8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L $120.00
LOCATOR® Abutments Requires LOCATOR Driver or Core Tool
8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L
8035-90-L 8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L
8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L
8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L
Code Platform Collar Heights Replacement Screw Price8530-09P 3.0mmD - 1000-20 $25.008035-09P 3.5mmD - 1000-01 $25.008045-09P 4.5mmD - 1000-01 $25.008057-09P 5.7mmD - 1000-01 $25.00
Includes Fixation Screw {For use with Implant Direct design library}
Scan Adapters
8530-09P 8035-09P 8045-09P 8057-09P
Retention Description 4 Pack ($31) 20 Pack ($140)- Processing Spacer 1000-100-L4 1000-100-L20
Retention Description 4 Pack ($23) 20 Pack ($104)1.5 lbs Xtra Light Ret Male Blue 1000-92B-L4 1000-92B-L203.0lbs Xtra Light Ret Male Pink 1000-92P-L4 1000-92P-L205.0lbs Male Clear 1000-92C-L4 1000-92C-L200 lbs Ext Range Male Gray 1000-92Z-L4 1000-92Z-L201.0 lb Ext Range Male Red 1000-92R-L4 1000-92R-L202.0lbs Ext Range Male Orange 1000-92E-L4 1000-92E-L204.0lbs Ext Range Male Green 1000-92G-L4 1000-92G-L20
- Black Processing Male 1000-93-L4 1000-93-L20
Retention Description 4 Pack ($56) 10 Pack ($126)- Repl Dent Cap Male Assembly 1000-91-L4 1000-91-L10
Retention Description 1 Pack ($35) 2 Pack ($64) 10 Pack ($284)Assorted Male Processing Pkg 1000-98SI-L1 1000-98SI-L2 1000-98SI-L10Assorted Ext Range Male Processing Pkg 1000-98S-L2 1000-98S-L10
LOCATOR® Abutment Components
1000-92B-L4 1000-92B-L20
1000-92P-L4 1000-92P-L20
1000-98S-L2 1000-98S-L10
1000-92Z-L4 1000-92Z-L20
1000-98SI-L11000-98SI-L2
1000-98SI-L10
1000-92E-L4 1000-92E-L20
1000-92G-L4 1000-92G-L20
1000-92C-L4 1000-92C-L20
1000-92R-L4 1000-92R-L20
1000-91-L4 1000-91-L10
1000-93-L4 1000-93-L20
1000-100-L4 1000-100-L20
30
3.0mmD Platform
3.5mmD Platform
4.5mmD Platform
5.7mmD Platform
Selection Chart: Overdenture & Screw-Retained Restorations
BallAbutment
Components
BallAbutments
OverdentureAbutments
Overdenture Screw-Retained Copings
OverdentureAbutment
Components
OD Abutment Comfort Cap
Transfer &Analogs
*1000-68*4000-13
Open-Tray Transfer Closed-Tray Transfer
Screw-Receiving Overdenture Abutment Transfer, Analog & Comfort Cap
LOCATOR® Abutment
Components
LOCATOR® Abutments
Gold Titanium Plastic Gold/Plastic Titanium
1000-61 1000-62 1000-63
1000-64 1000-65 1000-66 1000-67 1000-69
Abutments are compatible with Zimmer, BioHorizons (internal) and MIS Implants with 3.5mm, 4.5mmD and 5.7mmD prosthetic platforms
8530-61 8530-62 8530-64
8057-61 8057-62 8057-64
8035-61 8035-62 8035-64
Screw-Receiving Overdenture Abutments (*Includes Transfer & Comfort Cap)
8045-61 8045-62 8045-64
8035-72 8035-74
8045-72 8045-74
8057-72 8057-74
**1000-84**1000-87 1000-85 1000-81 1000-82 1000-88 1000-83 1000-86
8035-90-L8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L
8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L
8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L
8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L
LOCATOR® Attachments
Ball Attachments
Ball Abutments (**Includes Transfer & Comfort Cap)
1000-95-L4 1000-95-L20
1000-98S-L2 1000-98S-L10
1000-96-L4500-26
1000-98SI-L1 1000-98SI-L2
1000-98SI-L10
1000-91-L4 1000-91-L10
1000-92C-L4 1000-92C-L20
1000-92E-L4 1000-92E-L20
1000-93-L4 1000-93-L20
1000-92R-L4 1000-92R-L20
1000-92G-L4 1000-92G-L20
1000-92B-L4 1000-92B-L20
1000-92P-L4 1000-92P-L20
1000-92Z-L4 1000-92Z-L20
LOCATOR® Abutments
8530-62-15S 8530-63-15S
8530-63-30S 8530-64-30S
8035-62-15S 8035-63-15S 8035-64-15S
8035-63-30S 8035-64-30S 8035-65-30S
8045-62-15S 8045-63-15S 8045-64-15S
8045-63-30S 8045-64-30S 8045-65-30S
1000-94-L4 1000-94-L20
1000-100-L4 1000-100-L20
31
simplyfixed SMART PACKS & Screw-Receiving Abutments
Platform 1mmL 2mmL 4mmL Price3.0mmD - 8530-62 8530-64 $100.003.5mmD 8035-61 8035-62 8035-64 $100.004.5mmD 8045-61 8045-62 8045-64 $100.005.7mmD 8057-61 8057-62 8057-64 $100.00
Includes Transfer & Comfort Cap - requires 1.25mmD Hex Tool
Screw-Receiving Overdenture Abutments
8035-61 8035-62 8035-64
8045-61 8045-62 8045-64
8057-61 8057-62 8057-64
8530-62 8530-64
Code Description Price1000-70S Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool] $35.00
Replacement Tops for Angled Abutments Includes Transfer & Comfort Cap
1000-70S
Platform Collar Height 15º Angled 30º Angled Price3.0mmD 2.5mm 8530-62-15S - $120.003.0mmD 3.5mm 8530-63-15S 8530-63-30S $120.003.0mmD 4.5mm - 8530-64-30S $120.003.5mmD 2mm 8035-62-15S - $120.003.5mmD 3mm 8035-63-15S 8035-63-30S $120.003.5mmD 4mm 8035-64-15S 8035-64-30S $120.003.5mmD 5mm - 8035-65-30S $120.004.5mmD 2mm 8045-62-15S - $120.004.5mmD 3mm 8045-63-15S 8045-63-30S $120.004.5mmD 4mm 8045-64-15S 8045-64-30S $120.004.5mmD 5mm - 8045-65-30S $120.00
Screw-Receiving Angled Overdenture Abutments Short Includes Transfer & Comfort Cap requires 1.25mmD
8530-62-15S8530-63-15S
8035-62-15S8035-63-15S8035-64-15S
8045-62-15S8045-63-15S8045-64-15S
8530-63-30S8530-64-30S
8035-63-30S8035-64-30S8035-65-30S
8045-63-30S8045-64-30S8045-65-30S
Code Collar Heights Platform Angle Price8530-62K 2mm 3.0mmD 0° $2008530-64K 4mm 3.0mmD 0° $200
8530-62-15SK 2.5mm 3.0mmD 15° $2208530-63-15SK 3.5mm 3.0mmD 15° $2208530-63-30SK 3.5mm 3.0mmD 30° $220
8035-61K 1mm 3.5mmD 0° $2008035-62K 2mm 3.5mmD 0° $200
8035-62-15SK 2mm 3.5mmD 15° $2208035-64-15SK 4mm 3.5mmD 15° $2208035-63-30SK 3mm 3.5mmD 30° $2208035-64-30SK 4mm 3.5mmD 30° $220
8045-61K 1mm 4.5mmD 0° $2008045-62K 2mm 4.5mmD 0° $200
8045-62-15SK 2mm 4.5mmD 15° $2208045-64-15SK 4mm 4.5mmD 15° $2208045-63-30SK 3mm 4.5mmD 30° $2208045-64-30SK 4mm 4.5mmD 30° $220
8057-61K 1mm 5.7mmD 0° $2008057-62K 2mm 5.7mmD 0° $200
Includes Screw-Receiving Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw
simplyfixed SMART PACKS
Choose the convenience of a SMART PACK or select individual components à la carte
32
Code Description Price1000-81 Ball Abutment Housing - 2ea $30.001000-82 Nylon Liner - 2ea $15.001000-83 Nylon Liner Transfer - 2ea $15.001000-84 Ball Abutment Transfer - 2ea $30.001000-85 Ball Abutment Analog $20.001000-86 Ball Abutment Tools $65.001000-87 Ball Abutment Comfort Cap - 2ea $30.001000-88 Ball Abutment Housing & Nylon Liner $22.00
Ball Abutment Components
1000-82
1000-84
1000-86 1000-881000-87
1000-83
1000-85
1000-81
Screw-Receiving Overdenture Abut. Comfort Cap, Transfers & Analog
Code Prosthetic Platform Description Price1000-61 5.0mmD Aluminum Analog $30.001000-62 5.0mmD Open-Tray Transfer plus Fixation Screw $35.001000-63 5.0mmD Closed-Tray Transfer plus Fixation Screw $35.001000-68 5.0mmD Plastic Abutment Transfer - 2ea $35.004000-13 5.0mmD Plastic Comfort Cap - 2ea $30.001000-14 - Replacement Open-Tray Fixation Screw - 2ea $39.001000-15 - Replacement Closed-Tray Fixation Screw - 2ea $39.00
Screws require 1.25mmD Hex Tool
1000-681000-61 1000-62 1000-63 4000-13
Ancillary Components for Overdenture & Screw-Retained Restorations
LOCATOR® Abutment Transfer, Analogs and Alignment Tools
Code Description Price 1000-94-L4 Impression Coping 4 Pack $69.00 1000-94-L20 Impression Coping 20 Pack $306.00 1000-95-L4 Abutment Analog 4mmD 4 Pack $69.00 1000-95-L20 Abutment Analog 4mmD 20 Pack $306.00 1000-97-L4 Abutment Parallel Post 4 Pack $18 .00 4500-26 Comfort Cap - 2ea $10.00 1000-99-L Angle Measure Guide $23.00
1000-97-L4 1000-95-L4 1000-95-L20
1000-94-L4 1000-94-L20
4500-26
1000-99-L
Overdenture Screw-Retained Abutment Components Includes Fixation Screw [1000-05]with 1.25mmD Hex
Code Prosthetic Platform Description Price1000-05 - Coping Replacement Fixation Screw - 2ea $39.001000-64 5.0mmD Gold Coping $80.001000-65 5.0mmD Titanium Coping $40.001000-66 5.0mmD Plastic Coping $35.001000-67 5.0mmD Gold & Plastic Coping $80.001000-69 5.0mmD Titanium Temporary Coping $35.00
1000-661000-65 1000-671000-05 1000-64 1000-69
Straight Hex Tools1
Code Description PriceHT1.25L 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) $40.00HT1.25 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) $40.00
HT1.25S 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) $40.00HT2.0 2.0mmD Hex Tool Long $40.00
HT2.0S 2.0mmD Hex Tool Short $40.00HT2.5 2.5mmD Hex Tool Long (with retentive O-ring) $40.00
HT2.5S 2.5mmD Hex Tool Short (with retentive O-ring) $40.00HT3.0 3.0mmD Hex Tool Long $40.00
HT3.0S 3.0mmD Hex Tool Short $40.00
Square connection for use with Ratchet or Torque Wrench
Code Description PriceST Empty Surgical Kit for Legacy System Implants $250.00
BST Basic Surgical Kit for Legacy System Implants $1265.00CST Complete Surgical Kit for Legacy System Implants $2565.00
Surgical Trays
Surgical & Prosthetic Instruments
ST CSTBST
33
Tapered Hex Tools
Code Description PriceTHT1.25 1.25mmD Tapered Hex Tool Long $40.00
THT1.25S 1.25mmD Tapered Hex Tool Short $40.00THT1.25STHT1.25
Hex Drills
Code Description PriceHD1.25 1.25mmD Hex Drill $40.00HD2.0 2.0mmD Hex Drill $40.00HD2.5 2.5mmD Hex Drill (with retentive O-ring) $40.00HD3.0 3.0mmD Hex Drill $40.00 HD1.25 HD3.0HD2.0 HD2.5
Latch head connection for use with Surgical Motor
Code Description PriceR Ratchet $125.00
TW30 30Ncm Torque Wrench $125.00TW35 35Ncm Torque Wrench $125.00
SSH2.5 2.5mmD Stainless Steel Handle (with retentive O-ring) $100.00FMD Fixture Mount Drill $80.00PAR Paralleling Tool 2.8/2.3 $15.00
LDRILL Locator Drill $30.00DE Drill Extender $40.00
TWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) $395.00ABH Analog Holder $85.00LDD LOCATOR Driver 29mm Handpiece $48.00
LDDS LOCATOR Driver 23mm Handpiece $48.00LDT LOCATOR Square Driver 21mm Wrench $48.00
LDTS LOCATOR Square Driver 15mm Wrench $48.001000-96-L LOCATOR Core Tool $82.00
1000-96-LEA LOCATOR Core Tool (End) Assembly (not shown) $39.001000-96-LCTD Denture Cap Removal Trephine Drill (not shown) $23.00
Ancillary Instruments
R TW30
PARFMD DELDRILL ABH
TWM
HT2.5
HT2.5S
HT3.0
HT3.0S
HT2.0
HT2.0S
HT1.25
HT1.25S
HT1.25L
TW35 SSH2.5
1000-96-L
LDT LDTS
LDD LDDS
1Refer to the simplyIntegrated brochure for the drivers (not shown here) required for placement of simplyLegacy implants
34
3.2mmD Implants
Code Description PriceSD2.3 2.3/2.0mmD Step Drill with 6-16 markings $60.00
SD2.3S 2.3/2.0mmD Step Drill with 6-10 markings $60.00SD2.8 2.8/2.3mmD Step Drill with 6-16 markings $60.00
SD2.8S 2.8/2.3mmD Step Drill with 6-10 markings $60.00CBD3.2 Cortical Bone Drill for 3.0 and 3.2mmD Implants $60.00
SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2
Surgical Drills
Code Description PriceSD3.4 3.4/2.8mmD Step Drill with 6-16 markings $60.00
SD3.4S 3.4/2.8mmD Step Drill with 6-10 markings $60.00CBD3.7 Cortical Bone Drill for 3.7mmD Implants $60.00
3.7mmD Implants SD3.4 SD3.4S CBD3.7
Code Description PriceSD4.4 4.4/3.8mmD Step Drill with 6-16 markings $60.00
SD4.4S 4.4/3.8mmD Step Drill with 6-10 markings $60.00CBD4.7 Cortical Bone Drill for 4.7mmD Implants $60.00
4.7mmD Implants SD4.4 SD4.4S
Code Description PriceSD3.8 3.8/3.4mmD Step Drill with 6-16 markings $60.00
SD3.8S 3.8/3.4mmD Step Drill with 6-10 markings $60.00CBD4.2 Cortical Bone Drill for 4.2mmD Implants $60.00
4.2mmD Implants SD3.8 SD3.8S
Code Description PriceD5.1 5.1mmD Straight Drill with 6-16 markings $60.00
D5.1S 5.1mmD Straight Drill with 6-10 markings $60.00SD5.4 5.4/4.8mmD Step Drill with 6-16 markings $60.00
SD5.4S 5.4/4.8mmD Step Drill with 6-10 markings $60.00CBD5.7 Cortical Bone Drill for 5.7mmD Implants $60.00CBD7.0 Cortical Bone Drill for 7.0mmD Implants $60.00
5.7 and 7.0mmD Implants D5.1 D5.1S SD5.4 SD5.4S
Code Description PriceSD4.8 4.8/4.4mmD Step Drill with 6-16 markings $60.00
SD4.8S 4.8/4.4mmD Step Drill with 6-10 markings $60.00CBD5.2 Cortical Bone Drill for 5.2mmD Implants $60.00
5.2mmD Implants SD4.8 SD4.8S
CBD4.2
CBD4.7
CBD5.2
CBD5.7 CBD7.0
35
Drill Sequence
3.2mmD Straight / Tapered Implant
3.7mmD Straight / Tapered Implant
4.2mmD Straight / Tapered Implant
4.7mmD Straight / Tapered Implant
5.2mmD Straight / Tapered Implant
3.5/3.7
3.5/4.2
4.5/4.7
4.5/5.2
3.0/3.2
5.7mmD & 7.0mmD Straight / Tapered Implant
SD4.4 4.4/3.8mmD
SD3.8 3.8/3.4mmD
CBD5.7 SD3.4 3.4/2.8mmD
Optional
SD4.8 4.8/4.4mmD
Optional
SD2.8 2.8/2.3mmD
Optional
SD2.3 2.3/2.0mmD
SD5.4 5.4/4.8mmD
Dense Bone Final
D5.1 5.1mmD
Soft Bone Final Optional Bone Contour
for 5.7mmD
CBD3.7 SD2.3 2.3/2.0mmD
SD3.4 3.4/2.8mmD
Dense Bone Final
SD2.8 2.8/2.3mmD
Soft Bone Final Optional Bone Contour
CBD3.2 SD2.3 2.3/2.0mmD
SD2.8 2.8/2.3mmD
Dense Bone FinalSoft Bone Final Optional Bone Contour
CBD4.2 SD2.8 2.8/2.3mmD
Optional
SD2.3 2.3/2.0mmD
SD3.8 3.8/3.4mmD
Dense Bone Final
SD3.4 3.4/2.8mmD
Soft Bone Final Optional Bone Contour
CBD4.7 SD3.4 3.4/2.8mmD
SD2.8 2.8/2.3mmD
Optional
SD2.3 2.3/2.0mmD
SD4.4 4.4/3.8mmD
Dense Bone Final
SD3.8 3.8/3.4mmD
Soft Bone Final Optional Bone Contour
CBD5.2 SD3.4 3.4/2.8mmD
SD3.8 3.8/3.4mmD
Optional
SD2.8 2.8/2.3mmD
Optional
SD2.3 2.3/2.0mmD
SD4.8 4.8/4.4mmD
Dense Bone Final
SD4.4 4.4/3.8mmD
Soft Bone Final Optional Bone Contour
5.7/7.0
CBD7.0
Optional Bone Contour
for 7.0mmD5.7/5.7
THT1.25S HT1.25S HT2.0S HT2.5S HT3.0S
THT1.25
PAR (4)
LDRILL DE
R
SSH2.5
HT1.25 HT2.0 HT2.5 HT3.0
HD2.0 HD1.25 FMD HD3.0HD2.5
SD2.8 SD2.8S
D5.1 D5.1S
SD2.3 SD2.3S
SD5.4 SD5.4S
SD4.8 SD4.8S CBD5.2SD4.4 SD4.4S CBD4.7SD3.8 SD3.8S CBD4.2SD3.4 SD3.4S CBD3.7CBD3.2
CBD5.7
lower level of surgical tray
36
Complete Surgical Tray Contents
37
Surgical Tray
Inside Empty Tray
Lid
Surgical Tray Contents Complete Kit Basic Kit Code Description Price $2,565.00 $1,265.00
ST Empty Surgical Tray $250.00 X XSD2.3 2.3/2.0mmD Step Drill-Long $60.00 X X
SD2.3S 2.3/2.0mmD Step Drill-Short $60.00 XSD2.8 2.8/2.3mmD Step Drill-Long $60.00 X X
SD2.8S 2.8/2.3mmD Step Drill-Short $60.00 XCBD3.2 3.2mmD Cortical Drill $60.00 XSD3.4 3.4/2.8mmD Step Drill-Long $60.00 X X
SD3.4S 3.4/2.8mmD Step Drill-Short $60.00 XCBD3.7 3.7mmD Cortical Drill $60.00 XSD3.8 3.8/3.4mmD Step Drill-Long $60.00 X X
SD3.8S 3.8/3.4mmD Step Drill-Short $60.00 XCBD4.2 4.2mmD Cortical Drill $60.00 XSD4.4 4.4/3.8mmD Step Drill-Long $60.00 X X
SD4.4S 4.4/3.8mmD Step Drill-Short $60.00 XCBD4.7 4.7mmD Cortical Drill $60.00 XSD4.8 4.8/4.4mmD Step Drill-Long $60.00 X X
SD4.8S 4.8/4.4mmD Step Drill-Short $60.00 XCBD5.2 5.2mmD Cortical Drill $60.00 X
D5.1 5.1mmD Straight Drill-Long $60.00 X XD5.1S 5.1mmD Straight Drill-Short $60.00 XSD5.4 5.4/4.8mmD Step Drill-Long $60.00 X X
SD5.4S 5.4/4.8mmD Step Drill-Short $60.00 XCBD5.7 5.7mmD Cortical Drill $60.00 X
Hex ToolsTHT1.25 1.25mmD Tapered Hex Tool-Long $40.00 X X
THT1.25S 1.25mmD Tapered Hex Tool-Short $40.00 XHT1.25 1.25mmD Straight Hex Tool-Long $40.00 X X
HT1.25S 1.25mmD Straight Hex Tool-Short $40.00 XHT2.0 2.0mmD Straight Hex Tool-Long $40.00 X X
HT2.0S 2.0mmD Straight Hex Tool-Short $40.00 XHT2.5 2.5mmD Straight Hex Tool-Long $40.00 X X
HT2.5S 2.5mmD Straight Hex Tool-Short $40.00 XHT3.0 3.0mmD Straight Hex Tool-Long $40.00 X X
HT3.0S 3.0mmD Straight Hex Tool-Short $40.00 XHD1.25 1.25mmD Hex Drill $40.00 X XHD2.0 2.0mmD Hex Drill $40.00 XHD2.5 2.5mmD Hex Drill $40.00 X XHD3.0 3.0mmD Hex Drill $40.00 X
Ancillary InstrumentationFMD Fixture Mount Drill $80.00 X
LDRILL Locator Drill $30.00 X XDE Drill Extender $40.00 X XR Ratchet $125.00 X X
PAR (x4) Paralleling Tool 2.8/2.3 $60.00 X XSSH2.5 2.5mmD Stainless Steel Handle $100.00 X
10K-05-16-0041 Rev. 09 Printed in the U.S.A. Copyright © 2016 Implant Direct Sybron International. All Rights Reserved*10-05-16-0041*
A Legacy of Innovation
www.implantdirect.com | 888-649-6425
Legacy™4 ImplantAll-in-1 Packaging includes implant, fixture-mount, abutment, transfer, cover screw & healing collar — $225 SBM, $250 HA surface
Legacy 4 – the culmination of 30 years of evolution Introducing a revolutionary 2-piece fixture-mount/abutment that provides the accuracy of an open-tray transfer with the simplicity of a closed-tray transfer.
Square top detaches with the impression, providing a snap attachment for abutment/analog.
Square top detaches with impression for
IQity Impression Technique™
Torque- safety feature prevents damage
to implant interface
Concave transgingival profilematched with healing collar to shape
soft tissue for improved esthetics
Two-Piece fixture-mount (patent pending) with
preparable abutment
Progressively deeperbuttress threads
Quadruple-lead micro-threads
Three long cutting grooves
The abutment portion of the fixture-mount snaps onto the transferred top for the accuracy of a metal-to-metal connection
Straight Contoured
Laboratory Abutment
15° Angled Contoured
Straight Snap-On
Gold/Plastic
Zirconia/Ti Abutment
Plastic Temporary Abutment
Ball Attachment
LOCATOR® Abutment AngledStraight
Multiple-Unit w/Cap & Transfer
All trademarks are property of their respective companies. All prices shown in USD. Pricing and product availability subject to change without notice. Not all products shown are available in all countries.
simplycrown & bridge SMART PACK
simplyfixed SMART PACK
AngledStraightZirconia/Ti
Angled
Prosthetic options to meet your diverse case needs