+ All Categories
Home > Engineering > Design report

Design report

Date post: 09-Jan-2017
Category:
Upload: yash-patel
View: 1,485 times
Download: 9 times
Share this document with a friend
15
1 | Page GUJARAT TECHNOLOGICAL UNIVERSITY ITM UNIVERSE A Report On-use of solar enegy Under subject of DESIGN ENGINEERING B. E. II, Semester – III (MECHANICAL ENGINEERING) Submitted by: Group: ITM/MECH/3B-06 Sr. Name of Student Enrolment No. 1. Patel yash g. 140950119060 2. Patel yash j. 140950119059 3. Rahul sonera 140950119082 4. Mistry hardik 140950119086 5. Patel kalpak 140950119051 Guided by Chandkheda, Ahmedabad Affiliated
Transcript
Page 1: Design report

1 | P a g e

GUJARAT TECHNOLOGICAL UNIVERSITY

ITM UNIVERSE

A Report On-use of solar enegy

Under subject of

DESIGN ENGINEERING B. E. II, Semester – III

(MECHANICAL ENGINEERING) Submitted by:

Group: ITM/MECH/3B-06

Sr. Name of Student Enrolment No. 1. Patel yash g. 140950119060

2. Patel yash j. 140950119059 3. Rahul sonera 140950119082

4. Mistry hardik 140950119086 5. Patel kalpak 140950119051

Guided by Hetal Joshi

Assistant Professor

Minesh PatelHead of the Department

Academic Year(2015-2016)

Chandkheda, Ahmedabad

Affiliated

Page 2: Design report

2 | P a g e

Contents1. INTRODUCTION................................................................................................3

1.1. Design Engineering.........................................................................................3Thinking Procedure:.................................................................................................3

2. Story Boarding Canvas...........................................................................................42.1. Users:..........................................................................................................42.2. Activities......................................................................................................4

3. AEIOU SUMMARY:............................................................................................63.1. The environment:...........................................................................................63.2. The interaction:..............................................................................................63.3. Objects:.......................................................................................................63.4. Activities:.....................................................................................................63.5. Users:..........................................................................................................7

4. Ideation canvas....................................................................................................94.1. The general activities:......................................................................................94.2. The general situation/location / context:................................................................94.3. The general props possible solution is:.................................................................9

5. Product development canvas:.................................................................................115.1. The general people who will use our product:.......................................................115.2. Product experience........................................................................................115.3. Product features...........................................................................................115.4. Product function...........................................................................................115.5. Component.................................................................................................11

Page 3: Design report

3 | P a g e

1. INTRODUCTION

1. Patel Yash G. From: Godhra

2. Patel Yash J.From: Baroda

3. Rahul SoneraFrom: Baroda

4. Mistry HardikFrom: Baroda

5.Patel Kalpak From: Baroda

Our faculty guide Hetal JoshiGuide has explained as all about design engineering and also helped us in our project a lot.

1.1. Design Engineering Design Engineering is a general term that covers multiple engineering disciplines including electrical, mechanical, chemical engineer, aeronautical engineer, civil, Computer Engineering, Information Technology and structural/building/architectural engineers. The uniting concept is a focus on applying the 'engineering design process, in which engineers develop new products or processes with a primary emphasis on functional utility.While industrial designers may be responsible for the conceptual aesthetic and ergonomic aspects of a design, the design engineer usually works with a team of engineers and other designers to develop conceptual and detailed designs. He may work with industrial designers and marketers to develop the product concept and specifications, and may direct the design effort

Thinking Procedure:o Find our goalo Evaluation of goalo Generate proposals o Evaluation of proposals o Improvements

2. Story Boarding Canvas

Page 4: Design report

4 | P a g e

Understanding the problem of society is one of the biggest challenges for engineering student as till now they were making project on imaginary ideas. So the day 1 session was based on understanding the domains of the problem in broader sense which emphasized on interacting with the people of your domain area which included more of casual talk rather than technical session. And this is the story boarding canvas.

Here we would like to explain the aspects of this canvas by our project which use of solar engery.

As we know that, many crowd places like Garage, Industry, High ways or etc. have very big issue related with the tire because sometimes they have not much electricity

2.1. Users:Every general engineers, worker, Driver ...etc.

2.2. Activities:

The general activities are:

o Drivingo Observingo Waitingo Lubrication of parts

The image of Story Boarding Canvas is given below

Page 5: Design report

5 | P a g e

Fig. (1). Story Boarding Canvas

Page 6: Design report

6 | P a g e

3. AEIOU SUMMARY:

After finishing all 3 canvas, we started working on AEIOU summary whereo A: Activitieso E: Environmento I: Interactionso O: Objectso U: Users

This canvas is totally based on the observation. After observing some places like Garage, bus Garage , we have started working to make

it fair

3.1. The environment:o Noisy o Mechanical o Automatic o Crowd placeo Suffocating

3.2. The interaction:o Security o Servantso Managero About mechanismo Public o Manager to vehicle ownerso Security to vehicle owners

3.3. Objects:o Cameras

Page 7: Design report

7 | P a g e

o Hydraulic jacko Lightso tireo Window o vipero Cars

3.4. Activities:o Driving o Maintaining the mechanismo Cleaning of space allottedo Interactions’o Regular changing of partso Maintaining the electricity neededo Maintaining the proper speed o Observing o Lubrication of parts

3.5. Users:o Visitors of occasiono Car ownero Studentso Employeeso Doctorso Educational staffo Special occasional places

Page 8: Design report

8 | P a g e

The image of our AEIOU summary is as given below

Fig. (2). AEIOU Summary Canvas

Page 9: Design report

9 | P a g e

The image of Mind Mapping canvas is given below

Fig.(3). Mind Mapping Canvas

4. Ideation canvas

After 5 labs we have started working with people where we simply thought about the people for whom we want to solve the problem.

We started with our ideation canvas. For our product we have listed the people who can generally use our product. All

general people like engineer, businessman, officer, etc are people who will use our product.

The thought for context/location /situation and finally for possible solutions.

4.1. The general activities:o Student to education institutes

Page 10: Design report

10 | P a g e

o Electricity neededo Lubrication of partso Software systemo Charging of E cars

4.2. The general situation/location / context:o Location/Situation /Context

o Garageo Officeo Industryo Bus station o Air port

4.3. The general props possible solution is:o Charging solar battryso Appliance like fan lights can run on solar powero Large aera coverd so can get more solar engry conveted into eleticcity

The image of the ideation canvas is given below:

Page 11: Design report

11 | P a g e

Fig. (4). Ideation Canvas

Page 12: Design report

12 | P a g e

5. Product development canvas:

On our 7th we have started creating our product development canvas. In product development canvas we have mentioned about our product, its function,

features, revalidation, and product experience.

5.1. The general people who will use our product:

o vehicle student o labours of factory

5.2. Product experience o Proper usage of tireo Time consuming o Increasing comfortless

5.3. Product features o Feel suecuredo Fuel saving

5.4. Product function

o To increase use of clean energyo Saves moneyo Eco friendly

5.5. Componento Sensoro Mechanical roado Transmittero Solar penal

o Wires o Battryso The image of Product Development Canvas

Page 13: Design report

13 | P a g e

The image of product development canvas

Fig. (5). Product Development Canvas


Recommended