Digital Celeris Integrated SystemLab A

With Lon Valve Controller

T

GEX

Hood

Supply

Hood

H

Lab BWith Lon Valve Controller

T

Hood

Hood

Supply

H

GEX

Office AWith Smart VAV Tracking Pair

H

Exhaust

Supply

T

Office BWith Smart VAV Tracking Pair

H

Exhaust

Supply

T

Room level network (78K)

Lon Router Lon Router

BACnet/Ethernet

Building level network (1.2M)

Lon Router

Internet

BMSWorkstation

Firewall

Hub

Temperature:77 F

Humidity:55%

Air Changes/Hr:16.2

Status:Occupied

Alarms:Normal

Phoenix ControlsCorporation

Temperature:77 F

Humidity:55%

Air Changes/Hr:16.2

Status:Occupied

Alarms:Normal

Phoenix ControlsCorporation

Patient Room Isolation Room

ProgrammableControllers

Local Display& Command

Unit

Manifolded Variable Volume VAV or Constant Volume

Advantages• Redundant Exhaust fans• Negative pressurized duct• high discharge velocity• avoids re-entrainment• diluted exhaust stream• improved safety• reduced maintenance• future flexibility• diversity benefits !

Fumehoods

Exhaust Fans

Mixing Plenum

AirflowControlValves

Bypass air

IsotopeHood

New Products that work with Celeris

Active Pressure Monitors

Local Display Unit

Sensors for Temperature & Humidity (wall, duct etc)

ProgrammableControllers

PCM – What is it

A programmable I/O module with built-in trending and scheduling capabilities, that sits on the Celeris network– It allows us to add additional I/O points– It is a fully programmable controller– It is a local data logger for critical

spaces– Support local scheduling function

Programmable Control Module

6, 8 or 12 universal inputs 7, 8 or 12 analog or digital outputs BASIC-like programming interface

– 10 PID controllers– 15 timers– IF/THEN, AND/OR conditional logic – Arithmetic operators– 18 network inputs/18 network outputs– 100 internal points

Built-in data logger – up to 12,000 events Local scheduling functions

How does the PCM fit in?

Local Display Unit

Read/Write any point on the Celeris system

24Vac/Vdc operation Flush or Surface

mount options 3 levels of password

protection– None– Read Only– Full Access

Temperature:77 F

Humidity:55%

Air Changes/Hr:16.2

Status:Occupied

Alarms:Normal

Phoenix ControlsCorporation

Local Display Unit Up to 250 variables 5 variables per screen

– Typically, temp, humidity, airflows & calculated air change rates can be displayed

Integrates at the “room-level”

Phoenix ControlsCorporation

OtherRooms

orRouter/

BMS

LDU Displays:Space TemperatureTemperature Set PointSpace HumidityHumidity Set PointOffsetOffset Set PointOffset PolaritySuply FlowExhaust FlowConstant Volume Flow from CRVs

TH

Benefits of using Phoenix Safest System with Proven reliability

– Maximum fume hood containment– Optimal room pressurization– Quiet operation

Addresses budgetary needs – Usage Based Controls to assure diversity– Reduced capital and operating costs

Simplified ductwork configuration– Avoid additional straight duct runs & higher costs– Eliminate need for silencers– Optimum design of service chase

Confidence in our products !!

Benefits of using Phoenix Reduced startup time

– pre calibrated equipment– simple BMS interfaces (analog or digital)

Eliminates balancing headaches– Accel valves self balance minimizing startup time

Low Maintenance– improves customer satisfaction and reduces call backs

Factory training available for customers Local sales, application and service support

Get the project done right Get the project done right the first time !!!the first time !!!