Digital Celeris Integrated SystemLab A
With Lon Valve Controller
T
GEX
Hood
Supply
Hood
H
Lab BWith Lon Valve Controller
T
Hood
Hood
Supply
H
GEX
Office AWith Smart VAV Tracking Pair
H
Exhaust
Supply
T
Office BWith Smart VAV Tracking Pair
H
Exhaust
Supply
T
Room level network (78K)
Lon Router Lon Router
BACnet/Ethernet
Building level network (1.2M)
Lon Router
Internet
BMSWorkstation
Firewall
Hub
Temperature:77 F
Humidity:55%
Air Changes/Hr:16.2
Status:Occupied
Alarms:Normal
Phoenix ControlsCorporation
Temperature:77 F
Humidity:55%
Air Changes/Hr:16.2
Status:Occupied
Alarms:Normal
Phoenix ControlsCorporation
Patient Room Isolation Room
ProgrammableControllers
Local Display& Command
Unit
Manifolded Variable Volume VAV or Constant Volume
Advantages• Redundant Exhaust fans• Negative pressurized duct• high discharge velocity• avoids re-entrainment• diluted exhaust stream• improved safety• reduced maintenance• future flexibility• diversity benefits !
Fumehoods
Exhaust Fans
Mixing Plenum
AirflowControlValves
Bypass air
IsotopeHood
New Products that work with Celeris
Active Pressure Monitors
Local Display Unit
Sensors for Temperature & Humidity (wall, duct etc)
ProgrammableControllers
PCM – What is it
A programmable I/O module with built-in trending and scheduling capabilities, that sits on the Celeris network– It allows us to add additional I/O points– It is a fully programmable controller– It is a local data logger for critical
spaces– Support local scheduling function
Programmable Control Module
6, 8 or 12 universal inputs 7, 8 or 12 analog or digital outputs BASIC-like programming interface
– 10 PID controllers– 15 timers– IF/THEN, AND/OR conditional logic – Arithmetic operators– 18 network inputs/18 network outputs– 100 internal points
Built-in data logger – up to 12,000 events Local scheduling functions
Local Display Unit
Read/Write any point on the Celeris system
24Vac/Vdc operation Flush or Surface
mount options 3 levels of password
protection– None– Read Only– Full Access
Temperature:77 F
Humidity:55%
Air Changes/Hr:16.2
Status:Occupied
Alarms:Normal
Phoenix ControlsCorporation
Local Display Unit Up to 250 variables 5 variables per screen
– Typically, temp, humidity, airflows & calculated air change rates can be displayed
Integrates at the “room-level”
Phoenix ControlsCorporation
OtherRooms
orRouter/
BMS
LDU Displays:Space TemperatureTemperature Set PointSpace HumidityHumidity Set PointOffsetOffset Set PointOffset PolaritySuply FlowExhaust FlowConstant Volume Flow from CRVs
TH
Benefits of using Phoenix Safest System with Proven reliability
– Maximum fume hood containment– Optimal room pressurization– Quiet operation
Addresses budgetary needs – Usage Based Controls to assure diversity– Reduced capital and operating costs
Simplified ductwork configuration– Avoid additional straight duct runs & higher costs– Eliminate need for silencers– Optimum design of service chase
Confidence in our products !!
Benefits of using Phoenix Reduced startup time
– pre calibrated equipment– simple BMS interfaces (analog or digital)
Eliminates balancing headaches– Accel valves self balance minimizing startup time
Low Maintenance– improves customer satisfaction and reduces call backs
Factory training available for customers Local sales, application and service support
Get the project done right Get the project done right the first time !!!the first time !!!