8
Digital Filter vs FFT Techniques for Damping Measurements Svend Gade and Henrik Herlufsen, Brüel & Kjær, Nærum, Denmark Several methods for measuring damping are summarized in this article with respect to their advantages and disadvantages. The use of Digital Filters (DF) and the Fast Fourier Transform (FFT) are compared. In general, FFT analysis is best suited for heavily damped structures, while it is advantageous to use DF analysis when dealing with lightly damped structures.
![Aalborg Universitet Stability analysis and active damping for ......an LCL-filter or LLCL-filter, active damping [7-11] or passive damping [12-15] measures may be adopted. Passive](https://static.documents.pub/doc/80x56/60de630f7e12ee0ef01d287b/aalborg-universitet-stability-analysis-and-active-damping-for-an-lcl-filter.jpg)
![Resonance Damping and Parameter Design Method for LCL-LC ... · The filter can be of different types [6]. Compared with the first order L filter, the third-order LCL filter can meet](https://static.documents.pub/doc/80x56/5e76b9e50c589625166846e9/resonance-damping-and-parameter-design-method-for-lcl-lc-the-filter-can-be-of.jpg)
![3 math overview - NYU Computer ScienceLecture 3 Overview Projects ... 3 1 2 [ ] [ ] 1 0 high-pass filter 0 1.0 2.3 Slide credit: Bill Freeman Convolution versus FFT • 1-d FFT: O(NlogN)](https://static.documents.pub/doc/80x56/60305ecd1220d3755c231ed0/3-math-overview-nyu-computer-science-lecture-3-overview-projects-3-1-2-.jpg)
