Date post: | 26-Mar-2015 |
Category: |
Documents |
Upload: | alex-flanagan |
View: | 231 times |
Download: | 0 times |
Digital Stepper Drive with Analog InputDM805-AI
System Configuration
DIP Switch 8Bits Mode/Current/Microstep Setting Auto Configuration
RS232 Communication Port RJ11
Power Connectors
Analog Signals Connectors
Digital I/O Signals Connectors
Potentiometers
Indicators
0-5V Analog Input Signal
Built-in +5V Output for a Analog Control and Testing
Built-in Potentiometers for Accel, Decel and Speed Adjusting
Limit Signals Input for Safe Operation
Analog Input
+5V
0V
ControllerOutput
DM805-AIAnalog Input
+Ref-Ref
InputGND
NO Motion Controller NO PLC
Built-in Pulse Generator for a No-Controller System
Built-in Potentiometers for Accel, Decel and Speed Adjusting
Input Signals for Start/Stop, CCW/CW and High/Low Speed Control
Internal Oscillator
Fully Digital Stepper Drive
DIP Switch for Micro Step/Operation Current Setting
Multi-Stepping Function
PC-Based Software Adjusting
Pulse & Dir Input
ControllerOutput
DM805-AIPWM Input
PulseDir
PulseDir
It can work with the NEMA17/23/34 stepper motor to replace the brushless motor with gearbox due to its high torque and less motor noise at low speed.
ApplicationVelocity AdjustingThis drive is suitable for the application which needs to adjust the velocity via the potentiometer or analog 0-5V command.
High Torque and Less Noise at Low Speed
If necessary, it can be used in various kinds of machines, such as rotary heat exchange, conveyor belts, transport vehicle, laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on.
JVL PA0067
Maxon DEC
AMP 3520MO
Competitive In The Market
Performance
Cost30%
Thank You!