“direct from the importer’
AUST. JUNE/JULY/AUGUST/SEPTEMBER 2016 - MEGA PROMOTION
RM573030RM573260RM573160RM573162RM573172RM291310RM150849RM150888RM150916
#1
PACK INCLUDES: REMS TURBO K Universal circular metal sawing machine with automatic cooling lubricant unit for installation, metal working and industry. For job site and workshop. REMS saw blade Ø 225 mm. Progressive drive, easy to transport.
UNIV. CIRC SAW BLADE HSS for metal, 225×2×32, 120 teeth
#5 #6
RM849007RM849700
RM849006RM849703
#4
RM465463RM578592RM578594RM578596
PACK INCLUDES:INLINE PRESS TOOL: Compact, lightweight, battery powered press tool weighs only 2.2kg and connects up to 32mm copper tubing and up to 40mm in other fittings in 6 seconds. It can also be used with the REMS Mini Tongs. c/w 2 BatteriesK16/P18 MINI TONG K20 MINI TONG K25 MINI TONG
#3
2 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
RM573013RM573260RM150849RM150888RM150916RM573156RM150945
WAS $2800 $1600.00
WAS $2800 $1600.00
WAS $1850 $1650.00
WAS $2300 $2050.00
WAS $1300 $750.00 WAS $1300
$750.00
#2
PACK INCLUDES: AX-PRESS 15 LI-ION BASIC PACK: REMS Ax-Press 15 Basic-Pack. Cordless axial press for producing compression sleeve joints and for expanding tubes, diam: 1/2–11/4”. Drive unit, battery Ni-Cd, rapid charger. Sturdy steel case. EXPANDING ADAPTOR P: Taper angle 18 ) for expander heads P REHAU RE16 HEAD, REHAU RE20 HEAD, REHAU RE25 HEAD
AKKU-ROS P 40 SET: Powerful, handy electric tool for fast, easy cutting of pipe and tubing. Also for thin-walled pipe. Only 1.2 kg. For one-hand operation. Ideal for assemble, disassembly, repair. Plastic pipes, multilayer composite pipes, Ø ≤ 40 mm, Ø ≤ 1 5/8”, s ≤ 6,7 mm.
EXPANDER HEAD 16 X 2.2EXPANDER HEAD 20 X 2.8EXPANDER HEAD 25 X 3.5
PACK INCLUDES:AX PRESS 15 RHHIS C/W RH HEADS Cordless axial press for producing com-pression sleeve joints and for expanding tubes, diam: 1/2–11/4”. Drive unit, battery Ni-Cd, rapid charger. Steel case.EXPANDING ADAPTOR PEXPANDER HEAD 16 X 2.2 EXPANDER HEAD 20 X 2.8EXPANDER HEAD 25 X 3.5REHAU RH32 HEADEXPANDER HEAD 32 X 4.4
PACK INCLUDES:AX PRESS 25 KIT C/W 2 BATTERIES & RH HEADS 16/20/25/32: Cordless axial press for producing compression sleeve joints Ø 12 – 40 mm. 40 mm stroke, for pressing compression sleeve connections with a clamping distance ≤ 82 mm. For driving REMS pressing heads. Electro-hydraulic drive with powerful battery motor 14,4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, safety tip switch, swivelling pressing device. Integrated LED work light. Battery Li-Ion 14.4 V, 1.5 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50–60 Hz, 50 W. Without compression heads. Sturdy steel case.HELIX VE LI-ION CORDLESS DRILL: Cordless power drill/screwdriver. Powerful,electric tool for drilling and deburring of tubes. For battery and mains operation. Drilling in steel, stone Ø ≤ 10 mm, wood Ø ≤ 28 mm, tile, marble Ø ≤ 14 mm, drilling /loosening screws Ø ≤ 7 mm13PC BIT SET: Magnetic, with automatic bit lock, 12 bits (4 Torx, 3 cross-head PH, 3 cross-head PZ, 2 slotted) DEBURRER REG 10-54 E: Outer-inner pipe deburrer: Stainless steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 10–54 mm, Ø 1/2–2 1/8”.AKKU-ROS P 40 SET: Fast, easy cutting of pipe and tubing.
PACK INCLUDES: TURBO CU INOX Compact, portable circular pipe sawing machine for burr-reduced, right angle and rapid sawing. Ideal for stainless steel and copper tubes of pressfitting systems. For job site and workshop. Stainless steel tubes, copper tubes and other materials Ø up to 76 mm. Saw blade Ø 225 mm.
CIRCULAR SAW BLADE HSS for metal, specially for stainless steel pipes, fine-toothing, 225×2×32, 220 teeth.
3https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
RM560025RM561103RM561111
#11
#8 x5x5
x1
x1
#7 RM560027RM561007RM561001RM561002
x1
x1
WARRIOR JETTER: • Pipe sizes: 3” – 24” diameter • Pressure: 4,000 PSI• Flow: 18 GPM (68 LPM) • Dimensions: 160” L x 73” W x 74” H• Standard hoses: 500’ of 1/2” high pressure cleaning hose; 100’ of 5/8” rubber supply hose; 75’ of 1/4” trap-cleaning hose; 15’ of color-coded leader hose. • Engine: 87-HP, electronically controlled turbo diesel • Nozzles included: one penetrator and one closed stainless steel nozzle • Patented 180° pivoting hose reel & controls, variable-speed hydraulic rewind REMOTE CONTROL: The Spartan Tool remote control will allow the hydro-jetter operator to remotely control all features of the machine. WARRIOR NOZZLE KIT, 4000 PSI: Features 5 nozzles including a genuine Warthog® nozzle for cutting roots.WARTHOG NOZZLE 4-8” LINES: • Max. Pressure: 350 bar (5k psi) • Ports: 3 x 1/8 npt • Weight: 1.33 kg • Pressure: 100 - 350 bar (1.5k - 5k psi)• Rotation Speed: 200 - 500 rpm • Flow Capacity: 8 - 20 gpm (25 - 75 l/min)• Pulling Force: 9 - 27 lbs (40 - 120 nt) • Inlet Port: 1/2 npt & BSPP
ST75840000ST71704300
#13JETTER MODEL 300: Heavy-duty power for 3 to 6 inch lines up to 200 feet in length. Cuts through roots easily and disassembles quickly. Permanent Magnet 4/10 HP quiet motor with reverse-capability and watertight switch. SPECS: Pipe Sizes: 3” - 6” diameter, Weight: 138 lbs, Cable Capacity: 107’ of Magnum or 82’ of 5/8” (with anchor/leader cable). Size: 18” W x 30” H x 23” D, Motor: 120 Volt / 4.2 Amps, RPM: 300fCOMPACT LIFT: The Spartan Tool Compact Lift is the perfect accessory for the Model 2001 drain cleaning machine.
#9
WAS $920 $750.00
Spezial 2”/140-2,5 HSS-Bi Made in GermanyArt.-Nr. 561007
90°
x5
PACK INCLUDES: TIGER ANC VE SET Electric reciprocating pipe saw with power-transferring guide support for right angle sawing anywhere on site, without vice. Also for universal free-hand sawing. Only 3kg. ldeal for steel pipe, wood, pallets, metal, stainless steel, cast iron, breeze blocks, plaster boards, pumice stone, brick, cast iron, use with electronic stroke speed control.
REMS BLADES PKT 5 100/1/4SAW BLADE SPECIAL 2” HSS-BISAW BLADE SPECIAL 4” HSS-BI
PACK INCLUDES: TIGER ANC PNEUMATIC SET: Pneumatic reciprocating pipe saw for effortless, fast, right angle sawing with guide support and for free-hand sawing. Drive unit with straight machine handle, maintenance-free, water and dust resistant oscillating drive with allround needle bearing mounted crank drive (ANC), orbital action, pneumatic 1000 W, operating pressure 6 bar, safety switch with lock. Stroke speed control (accelerator switch) 0 to 1,700 rpm. Air inlet hose, air outlet hose. Universal saw blade clamp. Hexagon key. Guide support 2”. 2 pcs. REMS special saw blades 2”/140-3,2. In sturdy steel case.
SAW GUIDE SUPPORT 4” (TIGER)SAW BLADE SPECIAL 2” HSS-BISAW BLADE SPECIAL 4” HSS-BII
WAS $475 $250.00
PACK INCLUDES:PANTHER VE ELECTRIC RECIPROCATING SAW Robust, only 12.6” long , only 2.4 kg. Used for sawing metal, boilers, tanks, bath tubs, window frames and more. Has powerful universal motor 110 V, 50–60 Hz, 500 W (0.68 HP), square lift rod prevents deflection of bearing and guarantees a long service life, Orbital action with Vario-Electronic, long life saw blades and universal saw blade clamp. Steel pipes and others up to 6”. PACK 5 BLADES - REMS150/1,8 AND PACK 5 BLADES - REMS300/4 Saw blades for free-hand sawing for different materials. Alternating tooth pitch (combi-teeth) . Flexible saw blades, also for sawing flush with wall.
RM560022RM563100RM561001RM561002
WAS $2200 $1550 ST61048900ST64020000ST61049100 WAS $14,500 $13,500.00
PACK INCLUDES: SPARTAN SPARVISION CAMERA:
The smartest technology. Unrivaled versatility. The new Sparvision 200 pipe-inspection camera with a
retina-display iPad® 4 as its screen, flexibility on and off the job site. Instant
snapshots, on-screen drawing and a full on-screen keyboard. Self-leveling
color camera, locating beacon, 200’ of high-efficiency, super-slick push rod.
Built-in transport cart.
SPARTAN LOCATOR C/W HARD CASEThe Locator allows you to locate in virtually
any pipe material as well as tracing existing lines from other services.
TRANSMITTERPlace signals on pipes for easy line tracing
and depth estimation using our locator.
#10
ST79920000-AUST79946000ST79921000ST79921200
WAS $79,500 $75,000.00
WAS $1750.00 $1500.00
#12
WAS $31,000 $28,000.00
SPARTAN SOLDIER TRAILER JETTER: • Pipe sizes: 3” – 12” diameter • Pressure: 3,000 PSI• Flow: 12 GPM (45 LPM) • Weight: 1,560 lbs. empty; 3,220 lbs. full• Standard hoses include: 250’ of 3/8” high pressure cleaning hose; 100’ of 5/8” rubber supply hose; 75’ of 1/4” trap-cleaning hose (optional 350’ of 3/8” high-pressure cleaning hose)• Size: 126” L x 57” W x 58” H• Variable-speed power hose rewind
PORTABLE HOSE REEL
ST02884900ST04221458ST03448704
RM172012RM172611RM171340RM171341RM172050RM172250RM172270RM172275
CLEARANCEDemo#2
PACK INCLUDES: COBRA SET 22 - Portable, robust electric machine with high speed rotator for fast pipe and drain cleaning up to 70m away from drive unit. 16+22: Rems Cobra 22 main drive unit available in 240v only, 6 no. Ø16mm x 2.3m cable sections in carrier, straight auger 16, bulbous auger 16, toothed blade borer 16/25, cable joint separator, 5 no. Ø22mm x 4.5m cable sections in carrier, straight auger 22, retrieving auger 22, funnel auger 22, toothed cross blade borer22/35, cable joint separator, 2 pairs of guide gloves. Steel cases for both size of tool set. 740 rpm for fast efficient operation, especially handy when chain knocking, milling and root cutting. Cable sections can be connected together as required up to 70m in total.
RIVETED GUIDE GLOVE, LH / CHAIN KNOCKER 16MM SMOOTH,CHAIN KNOCKER 16MM SPIKED / CABLE AND TOOL SET 16,DRAIN STRAIGHT AUGER 22MM / DRAIN FUNNEL AUGER 22MM,DRAIN RETRIEVING AUGER 22MM
COBRA SET 22
COBRA SET 32
PACK INCLUDES:MODEL 100 POWER UNIT / MODEL 100 DRUM 1/2”MODEL 100 ROLL-AID / CABLE 1/2 X 75 IC#6:Lightweight drain snake power for 1-1/4” - 4” lines up to 100’. Allows 90 degree adjustment in work angle. Permanent Magnet 1/12 HP gear-reduced quiet motor with watertight switch makes Spartan’s drain machines the quietest in the industry. Optional patented Dial-A-Cable power feed allows for quick cable changes and feeds cable in and out automatically. Quick interchangeable drums capability.Direct drive with cable-saving slip clutch. Independent rotating inner drum prevents cable kinking and buckling yet allows quick torque build-up.Air-operated foot switch. 25’ power cord with ground fault interrupter.
SPECS: Pipe Sizes: 1-1/4” – 4” Diam. Weight: 55 lbs. Cable Capacity: 75’ of 1/2” Size: 18” W x 17” H x 19” D Motor: 115 Volt / 1.4 Amp RPM: 290 with no load
PACK INCLUDES:MODEL 100 POWER UNIT / MODEL 100 DRUM 5/16”MODEL 100 ROLL-AID / CABLE 5/16 X 75 IC#8:Lightweight drain snake power for 1-1/4” - 4” lines up to 100’. Allows 90 degree adjustment in work angle. Permanent Magnet 1/12 HP gear-reduced quiet motor with watertight switch makes Spartan’s drain machines the quietest in the industry. Optional patented Dial-A-Cable power feed allows for quick cable changes and feeds cable in and out automatically. Quick interchangeable drums capability.Direct drive with cable-saving slip clutch. Independent rotating inner drum prevents cable kinking and buckling yet allows quick torque build-up.Air-operated foot switch. 25’ power cord with ground fault interrupter.
SPECS: Pipe Sizes: 1-1/4” – 4” Diam. Weight: 55 lbs. Cable Capacity: 100’ of 5/16” Size: 18” W x 17” H x 19” D Motor: 115 Volt / 1.4 Amp RPM: 290 with no load
CABLE AND TOOL SET 16
PACK INCLUDES:COBRA 32 SET: Electric pipe and drain cleaning machine for pipes. Ø 20–250 mm (1⁄2–10”). Drive unit with maintenance-free belt drive, capacitor motor 230 V, 50 Hz, 1050 W, right and left-hand rotation, guide hose. Personal protection switch (PRCD). 4 cable sections 32 × 4.5 m in cable carrier, straight auger 32, retrieving auger 32, funnel auger 32, toothed cross-blade borer 32/45, cable joint separator 22/32, 1 pair of guide gloves, case for tool set. RIVETED GUIDE GLOVE, LH / STRAIGHT AUGER 32MM BULBOUS AUGER 32 / FUNNEL AUGER 32MM RETRIEVING AUGER 32 / TOOTHED BLADE BORER 32/55 ROOT CUTTER 32/90
4 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
WAS $1100 $850.00
WAS $980 $890.00
#14ST02812200ST02766402ST44276700ST03448704
ST02812200ST02766403ST44276700ST03449006
#15
Demo#1
WAS $3100
$2800.00
WAS $3550
$3200.00
RM174010RM172611RM174250RM174265RM174270RM174275RM174282RM174311
DEALSAWESOME
5https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
SPARE PARTS PACKAGES TO FIT: ANCRA, REED & RIDGID Wrenches
PACKAGERD40061RD92165RD92175RD92195RD92185
PIN 18”HOOK JAW 18”HEEL JAW & PIN 18”NUT 18”COIL &FLAT SPRING 18” $53.00
PACKAGERD40063RD92167RD92177RD92197RD92187
PIN 36”HOOK JAW 36”HEEL JAW & PIN 36”NUT 36”COIL & FLAT SPRING 36” $185.00
PACKAGERD40064RD92168RD92178RD92198RD92188
PIN 48”HOOK JAW 48”HEEL JAW & PIN 48”NUT 48”COIL & FLAT SPRING 48” $220.00
HOOK JAW HEEL JAW & PINCOIL & FLAT SPRING
NUT
HINGED CUTTER
CUTTER TUBETELESCOPIC TUBE CUTTER
CUTTER WHEEL
LOW CLEARANCE ROTARY CUTTER
Buy a HINGED CUTTER {Cap: 4-6”H6S} and receive 2 FREE CUTTER WHEELS {HS6 STEEL & HS16-8}
RD03130RD03506RD03507
Buy a TUBE CUTTER {Cap: 1/8-1 5/16” TC1Q} and receive 1 FREE CUTTER WHEEL {CUTTER WHEEL: OSS S/S}
RD03410RD03655
Buy a TUBE CUTTER {Cap: 1/4-2 5/8” TC2Q} and receive 1 FREE CUTTER WHEEL {CUTTER WHEEL: O} $74.50
RD03420RD03660
Buy a HINGED CUTTER {Cap: 2-4” H4S} and receive 2 FREE CUTTER WHEELS {HS4 STEEL & HS14 STEEL & IRON}
RD03120RD03504RD03505
Buy a HINGED CUTTER {Cap: 8-12”H12S} and receive a FREE CUTTER WHEEL {HS8-12 STEEL} $1299.00
RD03150RD03508
Buy a LOW CLEARANCE ROTARY CUTTER (Cap: 14-16”) and receive a FREE CUTTER BLADE
RD03316RD03530
Buy a HINGED CUTTER {Cap: 1 - 2 1/2” H21/2S} and receive 1 FREE CUTTER WHEEL {H21/2S “STEEL} $410.50RD03110
RD03502Buy a HINGED CUTTER {Cap: 6-8” H8S} and receive 1 FREE CUTTER WHEEL {HS8-12 STEEL} $1305.00RD03140
RD03508
Buy a TELESCOPIC TUBE CUTTER {Cap: 1/4-1 5/8” TC166} and receive 1 FREE CUTTER WHEEL {73505 FOR TC14}
RD03465RD03690
Buy a TUBE CUTTER {Cap: 4-6 5/8” TC6Q} and receive 1 FREE CUTTER WHEEL {CUTTER WHEEL: 30-40}
RD03460RD03665
PIN
WAS $31.00
WAS $33.00
WAS $38.00
WAS $45.00
WAS $51.00 WAS $260.00
WAS $210.00
WAS $112.00
WAS $64.00
PACKAGERD33176RD92166RD92176RD92196RD92186
PIN 24”HOOK JAW 24”HEEL JAW & PIN 24”NUT 24”COIL & FLAT SPRING 24” $94.00
PACKAGE #16
#17
#18
#19
#20
RD40057RD92160RD92170RD92190RD92180 $26.00
PIN 6”HOOK JAW 6”HEEL JAW & PIN 6”NUT 6”COIL & FLAT SPRING 6”
PACKAGERD40058RD92161RD92171RD92191RD92181
PIN 8”HOOK JAW 8”HEEL JAW & PIN 8”NUT 8”COIL & FLAT SPRING 8” $28.00
PACKAGERD40059RD92162RD92172RD92192RD92182
PIN 10”HOOK JAW 10”HEEL JAW & PIN 10”NUT 10”COIL & FLAT SPRING 10” $32.00
PACKAGERD40060RD92163RD92173RD92193RD92183
PIN 12-14”HOOK JAW 12”HEEL JAW & PIN 12-14”NUT 12”COIL & FLAT SPRING 12” $38.00
PACKAGERD40060RD92164RD92173RD92194RD92184
PIN 12-14”HOOK JAW 14”HEEL JAW & PIN 12-14”NUT 14”COIL & FLAT SPRING 14” $43.00
WAS $479.00
WAS $1550.00
WAS $950
WAS $1580.00
WAS $1270.00
WAS $3170.00
$37.40WAS $52.00
WAS $93.00
• Needs only 4” of clearance around pipe• Can be used anywhere - in the ditch, underwater, overhead • Efficient handle swing of only 90° to 110°
• The low profile design of these cutters requires only 5” (127 mm) clearance. • Pipe snaps off squarely once the operator completes the cut.
#21
#22
#23
#24
$765.30
$1042.60
$2676.20
$142.60WAS $175.00
$44.50WAS $58.00
COMBO #1
COMBO #2
COMBO #3
COMBO #4
COMBO #5
COMBO #6
COMBO #7 COMBO #9
COMBO #10COMBO #8
Buy a UNIVERSAL PIPE CUTTER {UPC636A} and receive 1 FREE BLADE AND A WATER TANK HOSE SYSTEM
RD07510RD97524RD97581
Buy a SAW IT® PNEUMATIC SAW and receive a FREE 6” AND 12” CHAIN
6 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
Buy a (1/8 - 5/8” OD) MINI TUBE CUTTER and receive 1 FREE CUTTER WHEEL {32633}
Buy an INTERNAL CUTTERand receive 10 FREE BLADES {Internal Abrasive}
Buy a (3/8 - 3 1/2” OD) QUICK RELEASE CUTTER and receive 1 FREE CUTTER WHEEL {3-6PVC}
Buy a PLASTIC CUTTER (2 1/2 - 5” OD) and receive 1 FREE CUTTER WHEEL {6QP}
Buy a RIDGID 60” PIPE WRENCHand receive 1 FREE HEEL JAW & PIN {60”}
RD03470RD03661
RD04500RD04502
RD04130RD04194
RD04150RD04198
RD31045RD92179
Buy an INTERNAL SAW CUTTERand receive 1 FREE BLADE {for Saw Tooth IC1}
DEALSAWESOME
Saw It is a pneumatic powered reciprocating saw. Used with Power Hack Saw Blades (sold separately), Saw It cuts steel, stainless steel, PVC (including C900), PE and PP. As a safety feature, a trigger lock prevents accidental “on” if the trigger is bumped or pressed unintentionally. Saw It needs 6” clearance beyond the pipe to accommodate blade movement. The Saw It must have a means to hold it in place and the recommended Saw It Vise (sold separately) provides stability and safety for the cut. Optional Blade Guides provide directional guidance for the saw and
greatly reduce blade wobble. Saw It cuts up to 24” diameter pipe when used with the Saw It Vise and a 12” chain extension. Saw It cuts up to 20” (500 mm) diameter pipe when used with recommended SAWITBG30 blade guide. Saw It Vise fits 4”-12” diameter pipe. When a 6’ or 12” chain extension is added, the vise capacity increases to 18” or 24” respectively.
WAS $8700.00
$6500.00
Reed’s pneumatic-powered Universal Pipe Cutters (UPC) for PE are available to cut 8” - 48” nominal diameter (200-1300 actual O.D. mm) PE pipe. Both kits ship in a steel toolbox and include a UPC cutter, a filter-regulator-lubricator, UPCSTEEL6 and UPCPE8 blades. The UPCPE8 blade will cut large diameter PE pipe with a wall thickness up to 2 23/32” (69 mm). To cut 6” - 8” PE pipe, the UPCSTEEL4 blade must be purchased separately.
WAS $251 $188.50
WAS $54 $35.00
WAS $170 $137.90
WAS $35 $28.00
WAS $20
$11.50
RD04501RD04503
WAS $700 $525.00
RD07615RD40628 RD40629
WAS $3100.00
$2500.00* DOES NOT INCLUDE VISE
7https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
REMS Panther Riciprocating Saw REMS - Panther ANC VE. Universal electric reciprocating saw with Vario-Electronic (VE) for free-hand sawing of steel pipes and other material up to 6”. Complete with one REMS universal saw blade - 5.9”. Super small only 12.6” long; light-weight only 5.3 lbs. Powerful universal motor - 110 V, 50–60 Hz, 0.68 HP. Square lift rod prevents deflection of bearing and guarantees a long service life Aggressive orbital action with Vario-Electronic switch, long service life of saw blades and universal saw blade clamp. All saw blades – with universal or with double tang – can be clamped without changing or turning the saw blade thrust piece. Optional carrying bag. RM560025
$15.00$20.00$25.00$25.00$20.00$25.00$20.00
REMS Roller Set Grooving rollers 1 – 1 ½” (pair) RM347030
REMS Grooving Rollers 2-6” SET (2) RM347035
Roll Grooving Attachment R300Robust, compact roll grooving attachment with oil hydraulic forward feed for grooving pipes of pipe coupling systems. For installation, sprinkler lines, commercial heating, industry and mining. For job site and workshop. Steel pipes DN 25–200 (300) 1–8” (12”), up to 7 mm. Stainless steel pipes, copper, aluminium, PVC pipes.DESIGN Handy, easy to transport, only 26kg. Oil hydraulic pressure cylinder for powerful in-feed of pressure roller. Pressure build-up with hydraulic hand pump. Individually adjust- able groove-depth-stop with fine adjustment, for automatic limitation of groove depth. Built-in ring gauge for automatic groove-depth-stop.GROOVING ROLLERS The proven REMS grooving rollers with perfectly size-adjusted pressure rollers and counterpressure rollers with well gripping axial knurls guarantee a secure rotation of the pipe and precise grooving. Grooving rollers machined from hardened special steel ensure extremely long service life. 3 pairs of groove rollers (pressure roller, counter-pressure roller) for the whole working range DN 25 – 300, 1–12”, easy change. Grooving rollers Cu (pressure roller,counterpressure roller) for copper pipe 54 – 159 mm. Groove rollers INOX (pressure roller made of stainless steel, counter-pressure roller made of toughened, specially hardened steel, nickel-plated) for stainless steel pipes 2–6” and 8–12”. Grooving rollers for aluminium, PVC pipes on request.DRIVE Fast, simple assembly. 3-face drive shaft of roll grooving attachment for secure clamping and optimum power transmission. Roll grooving attachments for threading machines of other makes, adjusted to support arm distance, diameter of support arm and spindle axis of the corresponding drive machine, on request.RM347001
RM347001 R300 Roll Grooving Attachment
RM347030REMS Roller Set of Grooving
Rollers 1-1 1/2 (pair)
*SUITS
Ridgid
Thr
eading
Machin
e
https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
RM347035REMS Grooving Rollers (2)
RM560025 REMS Panther Riciprocating Saw
100-1,8 HSS-Bi fl ex Art.-Nr. 561101 Made in Germany
150-1,8 HSS-Bi fl ex Art.-Nr. 561103 Made in Germany
150-1,4 HSS-Bi fl ex Art.-Nr. 561104 Made in Germany
90-1,4 HSS-Bi Art.-Nr. 561107Made in Germany
150-2,5��HSS-Bi�flex� Art.-Nr. 561110 Made in Germany
300-4,2 WS Art.-Nr. 561111 Made in Germany
150- 4,2 WS Art.-Nr. 561115 Made in Germany
REMS Saw Blades
SPECIAL
WAS $3968.00 $1800.00
WAS $652.60 $320.00
WAS $652.60 $320.00
WAS 333.70 $120.00
PACK 5 SAW BLADES REMS100/1,8PACK 5 SAW BLADES REMS150/1,8PACK 5 SAW BLADES REMS150/1,4PACK 5 SAW BLADES REMS00/1,4PACK 5 SAW BLADES REMS150/2,5PACK 5 SAW BLADES REMS300/4PACK 5 SAW BLADES REMS150/5
RM561101RM561103RM561104RM561107RM561110RM561111RM561115
WAS $28.80WAS $29.80WAS $33.70WAS $28.60WAS $32.30WAS $33.70WAS $28.10
GROOVES UP TO 12” PIPE
ANCRA Drain CleaningRM171201RM171340RM171341RM172050
RM172051
RM172151
RM172250RM174250 RM172270RM172275RM172280RM172291RM172293RM172610RM174050RM174201RM174265RM174270RM174275RM174282RM174291RM174293RM174295RM174296
WAS $125.00
WAS $100.00
WAS $125.00
WAS $620.00
WAS $710.00
WAS $5.50
WAS $54.30
WAS $76.70
WAS $59.10
WAS $65.20
WAS $62.30
WAS $109.90
WAS $118
WAS $33.50
WAS $850.00
WAS $683.00
WAS $79.40
WAS $77.60
WAS $77.60
WAS $101.90
WAS $123.70
WAS $138.00
WAS $182.80
WAS $197.50
WAS $143.00 WAS $167.90WAS $213.20WAS $243.60
WAS $68.80 WAS $68.80
WAS $150.00
RM174305RM174306RM174310RM174311 RM172611RM172612 RM174200
SPIRAL CABLE 16MMCHAIN KNOCKER 16MM SMOOTHCHAIN KNOCKER 16MM SPIKED CABLE AND TOOL SET 16
CABLE AND TOOL SET 22
CABLE JOINT SEPARATOR 22/32
DRAIN STRAIGHT AUGER 22MMDRAIN STRAIGHT AUGER 32MMDRAIN FUNNEL AUGER 22MMDRAIN RETRIEVING AUGER 22MMDRAIN TOOTHED BLADE BORERTOOTH CROSS BLADE BORER 22/45DRAIN TOOTHED CROSS-BLADEGUIDE GLOVES (PR)CABLE AND TOOL SET 3232MM CABLEBULBOUS AUGER 32FUNNEL AUGER 32MMRETRIEVING AUGER 32TOOTHED BLADE BORER 32/55TOOTH. CROSS BLADE BORER 32/45TOOTH. CROSS BLADE BORER 32/65TOOTH. CROSS BLADE BORER 32/90TOOTH. CROSS BLADE BORER 32/115
TOOTHED FORKED CUTTER 32/65TOOTHED FORKED CUTTER 32/90ROOT CUTTER 32/65ROOT CUTTER 32/90 RIVETED GUIDE GLOVE, LEFTRIVETED GUIDE GLOVE, RIGHT DRAIN CLEANING CABLE 32 X 4.5M
$75.00$80.00$95.00
$500.00
$600.00
$5.00
$30.00$45.00 $38.00$40.00$40.00$70.00$75.00$20.00
$750.00$600.00$45.00$45.00$45.00$55.00$68.00$75.00
$100.00$110.00
$85.00$95.00
$120.00$135.00
$43.00 $43.00$50.00
RM171201 REMS SPIRAL CABLE 16MM
RM172012 REMS COBRA 22/32
RM171340 CHAIN KNOCKER 16MM SMOOTH
RM171341 CHAIN KNOCKER 16MM SPIKED
8 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
COBRA 22 Electric Pipe and Drain Cleaning MachineSET 16 + 22 - The pack contains: 5 cable sections 16 × 2.3 m in cable carrier, straight auger 16, bulbous auger 16, toothed blade borer 16/25, cable joint separator, 5 cable sections 22 × 4.5 m in cable carrier, straight auger 22, retrieving auger 22, funnel auger 22, toothed cross-blade borer 22/35, cable joint separator 22/32, 2 pairs of guide gloves, steel case for each tool set.RM172012
CABLE AND TOOL SET 16 Included: 5 cable sections 16 × 2.3 m in cable carrier, straight auger 16, bulbous auger 16, toothed blade borer 16/25, cable joint separator, 1 pair of guide gloves, steel case for tool set
CABLE AND TOOL SET 22 Included: 5 cable sections 22 × 4.5 m in cable carrier, straight auger 22, retrieving auger 22, funnel auger 22, toothed cross-blade borer 22/35, cable joint separator, 1 pair of guide gloves, steel case for tool set
RM12610 GUIDE GLOVES
DRAIN STRAIGHT AUGER
BULBOUS AUGER 32
Cable joint separator for releasing the safety lock
RM172051 CABLE AND TOOL SET 22
RM172050 CABLE AND TOOL SET 16
DRAIN FUNNEL AUGER 22MM
DRAIN RETRIEVING AUGER 22MM
TOOTH FORKED CUTTER
DRAIN TOOTHED BLADE BORER
TOOTH CROSS BLADE BORER
ROOT CUTTERRIVETED GUIDE GLOVEDRAIN CLEANING
CABLE - 32 X 4.5M
SPECIAL
CLEANING
WAS $2125.50 $1800.00
At these prices, strictly only until STOCKS LAST
9https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
REMS Tornado Portable Threading MachineProven high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metalworking, industry. Pipe threads 1/16–2”, 16–63 mm. Bolt threads 6–60 mm, 1/4–2”. Pipe threads with REMS 4” automatic die head 21/2–4”. Also capable of threading plastic covered pipes. Automatic lubrication and cooling.
RM340201REMS Tornado Portable
Threading Machine
REMS NippleCHUCK & NippleFIX
MANUAL PIPE NIPPLE CHUCK 1 1/4” MANUAL PIPE NIPPLE CHUCK 1 1/2” MANUAL PIPE NIPPLE CHUCK 2"NIPPELFIX 1/2"NIPPELFIX 3/4"NIPPELFIX 1"NIPPELFIX 1 1/"NIPPELFIX 1 1/2"NIPPELFIX 2"
AUTO PIPE NIPPLE CHUCK - 2 1/2”AUTO PIPE NIPPLE CHUCK - 3”AUTO PIPE NIPPLE CHUCK - 4”
PIPE NIPPLECHUCK
$122.00$145.00$180.00$99.00
$127.00$154.00$200.00$205.00$228.00
$263.00$280.00$324.00
RM110400RM110500RM110600RM111000RM111100RM111200RM111300RM111400RM111500
RM111700RM111800RM111900
REMS Nippelfix. Automatic pipe nipple chuck for internal clamping of short pipe pieces. For threading machines with opening die head: Pipe turning machines, machines with rotating die head, threading devices. Ideal tool for using up short pipe pieces. Automatic quick-chuck and centering of pipe piece. No tools.
REMS NippleChuck. To be used universally for threading machines and for hand die stocks of all types and makes. For opening and non-opening die heads. Ideal accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2 and REMS eva and other makes. Ideal tool for using up short pipe pieces. Chucking and centering of pipe pieces by expanding of specially hardened spring steel segments. Internal clamping, so no thread required for clamping.
AUTOMATIC CHUCK 2 automatic chucks with self-centering clamping jaws for easy and fast clamping and release of the material. Self-tightening, hence maximum clamping force. No slipping of pipes. AUTOMATIC LUBRICATION AND COOLING Robust, proven oil pump with high pumping volume. Optimized oil distribution directly onto the threading point through the die head ensures clean threads and long service life of dies, gear and motor.UNIVERSAL AUTOMATIC DIE HEAD Only one universal automatic die head for all threads, including long threads; automatic opening with automatic thread-length-stop for tapered threads. Fast and easy adjustment of thread size. Easy-to-read thread-size scale. Simple and fast change of dies through lock-in positioning in die holder.DIES The proven, indestructible REMS quality dies with precise cutting geometry ensure an excellent start-cutting performance, easy threading and clean threads. Dies in a high-quality special-grade steel, fully tempered and hardened, for extremely long die life.PIPE CUTTER Self centering. Robust body made of forged steel. Ergonomic, wide handle for powerful infeed of spindle. Specially hardened cutter wheel in tough-hard REMS die-steel ensures long service life.INNER PIPE DEBURRER Robust, easy-to-handle deburring device with adjustable deburring positioning. Specially hardened and designed deburring blade ensures easy deburring and extremely long service life. Two cutting edges for optimum chip flow, specially for small diameters.THREAD-CUTTING OIL REMS Sanitol and REMS Spezial. Specially developed for threading. High cooling and lubricating effect. Essential for clean threads and longer service life of dies, tools and machines. REMS 4”automatic die head for pipe threads 2½ – 4”.
WAS $5,200.00 $3600.00
unbelievableprices
WAS $293.20WAS $349.00WAS $428.60WAS $226.75WAS $268.60WAS $327.50WAS $416.80WAS $472.20WAS $525.25
WAS $627.80WAS $669.80WAS $759.10
PIPE NIPPLEFIX
ANCRA Straight Pipe Wrenches
ANCRA Aluminium Pipe Wrenches
ANCRA Spud Wrenches
ANCRA Bolt Cutter
ANCRA Threaded Rod Cutter
ANCRA TriStand 6” Chain Vise
ANCRA Offset Pipe Wrenches
Straight Pipe Wrench
Aluminium Wrench
Hex Smooth Jaw
Bolt Cutter
Spud Wrench
APTPWO08APTPWO10APTPWO12APTPWO14APTPWO18APTPWOA14APTPWOA18
OFFSET H/DUTY 8”/200MMOFFSET H/DUTY 10”/250MMOFFSET H/DUTY 12”/300MMOFFSET H/DUTY 14”/350MMOFFSET H/DUTY 18”/450MMOFFSET ALUMINIUM 14”OFFSET ALUMINUM 18”
$6.95$8.85
$11.60$14.20$20.50$21.00$30.00
APTPWH06APTPWH08APTPWH10APTPWH12APTPWH14APTPWH18APTPWH24APTPWH36APTPWH48APTPWH60
APTPWA10APTPWA12APTPWA14APTPWA18APTPWA24APTPWA36APTPWA48
APTSPUD
APTBC12APTBC14APTBC18APTBC24APTBC30APTBC36APTBC42
HEAVY DUTY 6”/150MMHEAVY DUTY 8”/200MMHEAVY DUTY 10”/250MMHEAVT DUTY 12”/300MMHEAVY DUTY 14”/350MMHEAVY DUTY 18”/450MMHEAVY DUTY 24”/600MMHEAVY DUTY 36”/900MMHEAVY DUTY 48”/1200MMHEAVY DUTY 60”/1500MM
ALUMINIUM 10”/250MMALUMINIUM 12”/300MMALUMINIUM 14”/350MMALUMINIUM 18”/450MMALUMINIUM 24”/600MMALUMINIUM 36”/900MMALUMINIUM 48”/1200MM
SPUD 12”
BOLT CUTTER 12”/300MMBOLT CUTTER 14”/350MMBOLT CUTTER 18”/450MMBOLT CUTTER 24”/600MMBOLT CUTTER 30”/750MMBOLT CUTTER 36”/900MMBOLT CUTTER 42”/1050MM
$4.90$5.90$7.20
$10.00$12.90$17.90$27.70$62.20$98.00
$225.50
$11.65$15.35$17.40$27.35$41.30$82.00
$161.60
$14.80
$10.40$12.85$16.60$22.70$31.80$39.50$61.50
Ancra Heavy Duty Straight Pipe wrenches, also known as “Stillson wrenches”. Designed to handle the toughest of demands. Available in sizes 6”- 60”. Self tightening properties and hardened, serrated jaws that securely grip soft iron pipe and pipe fittings. Exceeds Federal Specification no. GGG-651 Type 11 Class A.
Ancra Aluminium Straight Pipe wrenches, 40% less weight than Heavy Duty Straight wrenches. Designed to handle the toughest of demands. Available in sizes 10”- 48”. Self tightening properties and hardened, serrated jaws that securely grip soft iron pipe and pipe fittings. Exceeds Federal Specification no. GGG-651 Type 1 Class B.10
Ancra Heavy Duty Slanting pipe wrenches handle the toughest demands. Available in sizes 8”- 18” (up to 3”nominal pipe capacity). Self tightening properties and hardened, serrated jaws that securely grip soft iron pipe and pipe fittings. The Aluminium Offset wrench is a far lighter option.
Use for your polished chrome parts. No slipping or harsh scratching. Perfect looking installations every time. Use it to assemble your threaded parts and for precision work.
ANCRA Hex Smooth Jaw Wrenches
APTHW095APTHW125
APTTRC10APTTRCSB1
APTVCT06
HEX SMOOTH JAW 9-1/2”HEX SMOOTH JAW 12-1/2”
THREADED ROD CUTTER 10MMTHREADED ROD CUTTER M10 DIE
TRISTAND 6” CHAIN VISE
$9.85$19.70
$141.40$44.70
$173.00
For use on large nuts or hex fittings especially if the parts are too large for traditional plumbers adjustable spanners. Access to large fittings in tight areas. The handle offers excellent leverage on hard to shift fittings.
This tool has an alloy steel blade with a massive cutting ability of <HRC40. The Bolt Cutter CrV has an adjustable jaw edge, simply by altering the bolt drop forger adapter. Easy to use, strong as steel, easy on the pocket.Conform to GGG-C-740d Type II Class 3 & 4 STANDARD.
10 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
Ancra TriStand 6” Chain Vise
WAS $13.90WAS $17.70WAS $23.20WAS $28.40WAS $41.00WAS $39.00WAS $56.00
WAS $9.80WAS $11.80WAS $14.40WAS $20.00WAS $25.80WAS $35.80WAS $55.40
WAS $124.40WAS $196.00WAS $451.00
WAS $23.30WAS $30.70WAS $34.80WAS $54.70WAS $82.60
WAS $164.00WAS $323.20
WAS $29.60
WAS $19.70WAS $39.40
WAS $20.80WAS $25.70WAS $33.20WAS $45.40WAS $63.60WAS $79.00
WAS $123.00
WAS $283.00WAS $89.40
WAS $346.00
Offset Pipe Wrench
50% OFF
Threaded Rod Cutter
ALL WRENCHES, CUTTERS & VISE
11https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
REED Massive Sell OutRD01522RD01532RD02040RD02070RD02080RD02092RD02093RD02095RD02102RD02112RD02113RD02121RD02130RD02150RD02190RD02202RD02204RD02210RD02220RD02230RD02232RD02242 RD02255RD02313RD02385RD02386RD02420RD02430RD02440RD02450RD02460RD02470RD02491RD02493RD02510RD02520RD02530RD02672 RD06331RD06337 RD11601RD11611 RD08049RD08051RD08059RD08060RD08061RD08062RD08063 RD04385
VISE UTILITY 24-1/2C (JAW: 4 1/2”)VISE UTILITY 25-1/2C (JAW: 5 1/2”)CHAIN WRENCH WA14” H/DUTYCHAIN WRENCH WA36” H/DUTYCHAIN WRENCH WA48” H/DUTY2 1/2-12” CHAIN WRENCHPIPE WRENCH 10” ALUMPIPE WRENCH 14” ALUMPIPE WRENCH 48” ALUM HDSPUD WRENCH (CAP: 2 5/8”)INTERNAL WRENCH 3/4-1”REFINERY WRENCH 10” RF10PIPE WRENCH 10” STRAIGHT RW10PIPE WRENCH 14” STRAIGHT RW14PIPE WRENCH 48” STRAIGHT RW48OFFSET ALUMINIUM WRENCH 14” 90ºPIPE WRENCH 18” OFFSETPIPE WRENCH 8” END RWO8PIPE WRENCH 10” END RW010PIPE WRENCH 14” END RW014PIPE WRENCH 12” END RW012PIPE WRENCH 24” END RW024 STRAP WRENCH SW18A48 (Cap: 1-12”) TRISTAND 1/8-2 1/2” YOKEQUICK WRENCH 1/8-3/4”QUICK WRENCH 1/8- 1 1/4”YOKE VISE 1/8-2”YOKEVISE 1/8-2 1/2”YOKE VISE 1/8-3 1/2”YOKE VISE 1/8-4 1/2”YOKE VISE 1/4-6”YOKE VISE 1-8”VISE WELDING PWV461R (Cap: 1/2-8”)VISE WELDING PWV463R (Cap: 1/2-8”)CHAIN VISE CV2 (Cap: 1/8-2 1/2”)CHAIN VISE CV4 (Cap: 1/8-4”)CHAIN VISE CV5 (CAP: 1/8-5”)SQUARE DRIVE RATCHET WRENCH 1”REED CHAIN TONG 3/4-4” R231REED CHAIN TONG 2-12” BASIN BW125 (Cap: 3/8- 1 1/4”)BASIN SOLID HEX (Cap: 1 1/4”) SOIL PIPE CUTTER SC49-6 (1 1/2-6”)SOIL PIPE CUTTER SC49-10 (1 1/2-10”)SOIL PIPE CUTTER - SC59-6 (1 1/2-6”)SOIL PIPE CUTTER - SC59-8 (1 1/2-8”)SOIL PIPE CUTTER -SC59-10 (1 1/2-10”)SOIL PIPE CUTTER- SC59-12 (1 1/2-12”)SOIL PIPE CUTTER-SC59-15 (1 1/2-15”)PVC/PE SHELL CUTTERS
$82.70$118.50$79.50
$291.20$505.90
$1,149.30$51.90$53.70
$471.40$57.10$63.20$77.70$22.50$30.50
$311.60$53.80$73.70$17.00$23.90$30.75$28.75$70.40
$140.00$516.80$80.09
$107.85$117.90$223.20$306.10$392.90$527.40
$1,469.40$262.80$158.70$149.60$259.90$387.90$148.80 $400.50
$1,030.20 $39.80$28.10
$619.30$793.40$397.50$429.10$478.30$523.90$587.40$82.40
COMBO DEALBUY 1 STRAP WRENCH SW18A
and receive a FREE REPLACEMENT STRAP
RD02249
CHAIN TONG/WRENCH
INTERNAL WRENCH
ONE-HAND (QUICK) WRENCH
SPUD WRENCH
REFINERY/OPERATOR WRENCH
OFFSET WRENCH
PIPE WRENCH
STRAP WRENCH
CHAIN wrenches provide safe, reliable and powerful torque and are useful for all types of pipe fitting, from waterworks to plumbing.
SPUD wrenches allow jaws to fit into tight places. They will not mar chrome, brass or other fittings. The smooth jaws are gentle on finished and visible surfaces.
INTERNAL wrenches remove short pieces from fittings and mains. Expands to twist out nipples & broken pipe.
PIPE wrenches have a solid steel pin in the heel jaw which strengthens the wrench.
REFINERY / OPERATOR wrench is two tools in one. It serves as a pipe wrench and a valve wheel wrench.
STRAP wrenches have gripping power without scratching or deforming plastic or polished metal pipe.
ONE-HAND wrenches have a special hand grip which provides ergonomic advantages of higher torque and less hand fatigue.
OFFSET wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. This wrench provides easy entry into tight spots. Ideal for overhead applications.
SQUARE DRIVE RATCHET wrench for ratcheting line-up clamps for welding steel pipe and for other process piping needs. Certain valves require square drive ratchet wrenches, and the ratchet and reverse option speeds up jobs.
YOKE VISE 1/8-2”
VISE UTILITY 24-1/2C
VISE WELDING PWV461R
SQUARE DRIVE RATCHET WRENCH
SOIL PIPE CUTTER
SC49
CHAIN VISE CV2
RD04385 PVC/PE SHELL
CUTTERS
WAS $139 $102.00
WAS $98.00WAS $140.00
WAS $93.00WAS $340.00WAS $590.00
WAS $1,340.00WAS $61.00WAS $63.00
WAS $550.00WAS $67.00WAS $74.00WAS $91.00WAS $26.50WAS $37.00
WAS $364.00WAS $63.00WAS $86.00WAS $20.00WAS $28.00WAS $36.00WAS $34.00WAS $82.50
WAS $160.00 WAS $610.00
WAS $95.00WAS $130.00WAS $140.00WAS $260.00WAS $360.00WAS $460.00WAS $620.00WAS $1,715.00WAS $307.00WAS $185.00WAS $175.00WAS $303.00WAS $455.00WAS $175.00WAS $470.00
WAS $1,200.00WAS $46.50WAS $33.00
WAS $750.00WAS $930.00WAS $700.00WAS $500.00WAS $560.00WAS $615.00WAS $690.00
WAS $96.00
Three-sided jaws are standard on Reed chain vises, giving the user extra value.
Yoke Pipe Vises permit the strongest jaw-to-jaw gripping of pipe for high-torque applications like threading. Made of ductile or malleable iron and have hardened, high carbon steel jaws for toughness and long life.
63
R450GBOriginally designed for firefighter use in forest fires and now a great choice for weight-critical situations.
TOOLTOOL
VISES 5MORE ABOUT TRIPODS…
R450+: patented, double-sided, steel bowtie jaws (450J) for up to 6” metal pipe; chain vises are best for holding both standard and irregular shapes
R470+: patented, double-sided, steel bowtie jaws for up to 6” metal pipe; 60% larger top tray than R450+ and 45 degree crank handle
R450P & R470P: for plastic pipe up to 6”; one patented, neoprene jaw (450PJ) set for plastic/soft metal; one side of double-sided bowtie jaw for metal pipe
R450C: patented stainless steel jaws, with rubber on one side; anodized (not painted) aluminum base for corrosion protection; clear slip tube over chain; food grade lubricant; good for clean room use
R450GB: aluminum legs for weight-critical field uses; up to 4” pipe capacity, no ceiling jack screw also lowers weight for easier portability
R450EXPORT: unassembled R450+ designed for low cost international shipment
R40+: two-sided lower jaws for up to 2 1/2” metal pipe; best Tripod for high torque applications like hand or power drive threading
R40EXPORT: unassembled R40+ designed for low cost international shipment
FEATURES patented internal safety stop to protect against
operator injuries.
Convenient adjusting screw and a hardened steel locking ring are two features that make these pipe jacks last for many years of use. Patented internal safety stop on the pipe jacks creates a 1” safety zone and prevents injuries to hands and fingers. JFV Folding Pipe Jack offers same great features plus legs fold for compact storage and easier portability. Roller head jack JH2R has extra wide bearing for great strength and tool life. Roller head jacks are preferred when circumstances call for the pipe to be turned for fabrication such as welding or roll grooving. Lower cost, v-head JHV is suitable for most ordinary pipe support needs. Adjusting screw gives proper working height. Outer surfaces are powder painted or zinc phosphate plated to resist corrosion. Ball transfer head JTA attaches to Ridgid® and Sumner® models while all Reed heads and bases interchange with Sumner® and Greenlee®.
JH2R
1” Safety Zone
Lock Washer for Fast Height Adjustment
Adjusting Screw
PIPE JACKS
JTA
JHV
Patented Internal Safety Stop
JTA 06351 Ball Transfer Head (pair) 1000 455 3/8 - 12 10 - 300 4.6 2.1V-HEAD 96371 V-Head 2000 or 2500 1/8 - 36 3 - 914 6.4 2.9
Depends on Pipe JackROLLER HEAD 96372 Roller Head 2000 or 2500 1/4 - 24 32 - 610 9.9 4.5
Depends on Pipe Jack
Pipe Capacity
kgDescriptionCatalog
No.ItemCode in mm
Weight
lbskg
Weight Capacity
lbs
ALTERNATE HEADSThe 1,000 lb (454 kg) capacity ball transfer attachment (JTA) with replaceable ball casters bolts to either side of v-head models. Note that use of the JTA head decreases the overall weight capacity of the jack. V-HEAD and ROLLER HEAD options are interchangeable on any of the three pipe jacks Reed offers.
JHV* 06350 V-Head High Jack 28 - 49 711-1245 2000 909 1/8 - 36 3 - 914 22.8 10.4 JH2R* 06352 Roller Head High Jack 28 - 49 711-1245 2000 909 1 1/4 - 24 32 - 610 25.0 11.4 JFV 06370 Folding V-Head Pipe Jack 28 - 49 711-1245 2500 1135 1/8 - 24 3 - 610 25.0 11.4NEW*6 or more pieces in any combination must ship by truck freight.
Pipe Capacity
kgDescriptionCatalog
No.ItemCode in mmin
Height Adj. Weight
mm lbskg
Weight Capacity
lbs JFV
450PJ Bowtie Jaws
Neoprene Jaw Regular Jaw
Carrying Handle
Rounded Feet for Handling Safety
450JBowtie Jaws
JFV folded for transport
TRISTAND 1/8-2 1/2 YOKE
CUTTING CORNERS
REMS Cutters & Accessories
REMS Diamond Core Drilling Crowns
$90.00$120.00$135.00$140.00$155.00$185.00$190.00$220.00$225.00$250.00$355.00$370.00
RM181015RM181030RM181040RM181045RM181050RM181057RM181060RM181065RM181070RM181080RM181085RM181090
High quality universal diamond core drilling crowns. Inductively soldered. Universally usable for dry and wet drilling, hand held or with drill stand. Ideal for universal applications in steel-reinforced concrete, masonry and many types of material. For installation, metalwork, industry. Single connecting thread UNC 1¼ female. Drilling depth 420 mm. Specially developed, high quality diamond segments with high diamond percent-age and special bonding, for excellent drilling performance and very long life. Diamond segments with conical cut (”roof shape”) for fast, easy and quiet drilling. Inductively soldered on fully automatic soldering machines for constant high quality of the soldered connection.
RM113380 RAS CU-INOX 6-42MM
RM113370 RAS CU 8-42MM
RM574000 ECO PRESS DRIVE UNIT
RM570290 *STEEL CASE FOR 2
LARGE AKKU TONGS
12
RM291280 REMS ROS P63
SPECIALS
RM113370
RAS Cutter CU 8-42mmQuality pipe cutter with quick adjustment. Solid, handy, U-shaped design. Sturdy spindle, long spindle guidance and hardened back pressure rollers provide exact alignment to the pipe, easy in-feed, easy cutting and precise, right angle cut. Ratchet for quick adjustment in both directions. Only 1 cutter wheel for the complete working capacity Ø 3 – 120 mm.
WAS $416.80 $135.00
RM113380
RAS Cutter CU/Inox 6-42mmQuality pipe cutter with quick adjustment. Solid, handy, U-shaped design. Sturdy spindle, long spindle guidance and hardened back pressure rollers provide exact alignment to the pipe, easy in-feed, easy cutting and precise, right angle cut. Ratchet for quick adjustment in both directions. Only 1 cutter wheel for the complete working capacity Ø 3 – 120 mm.
WAS $234.50 $165.00
RM291280
REMS ROS P63 - Pipe ShearsHandy quality tools for clean, fast pipe cuts. For t hin-walled pipes also. Sturdy aluminium design. For single-hand operation. Plastic pipes, multi-layer composite tubes Ø ≤ 63 mm Ø ≤ 2”.
WAS $238.80 $165.00
REMS Steel Storage Box for 2 Pairs of Crimping Pliers*Steel Case ONLY, 42+54 stable sheet steel case. Very robust.
WAS $131.95 $60.00
RM570290
WAS $252.00 $155.00
REMS Eco Press Drive UnitUniversal, manual radial press for poducing pipe pressing joints for all common pressfitting systems. Pressing joints with plastic and multi-layer composite tubes Ø 10–26 mm / 3/8-1”. Complete range of REMS pressing tongs for all common pressfitting systems. RM574000
WAS $212.60WAS $292.10WAS $333.60WAS $343.40WAS $376.10WAS $459.80WAS $452.50WAS $528.60WAS $541.10WAS $600.20WAS $874.40WAS $909.40
D/CROWN UDKB 42X420UNC 1 1/4D/CROWN UDKB 72X420UNC 1 1/4D/CROWN UDKB 92X420UNC 1 1/4D/CROWN UDKB 102X420UNC 1 1/4D/CROWN UDKB 112X420UNC 1 1/4D/CROWN UDKB 122X420UNC 1 1/4D/CROWN UDKB 132X420UNC 1 1/4D/CROWN UDKB 152X420UNC 1 1/4D/CROWN UDKB 162X420UNC 1 1/4D/CROWN UDKB 200X420UNC 1 1/4D/CROWN UDKB 225X420UNC 1 1/4D/CROWN UDKB 250X420UNC 1 1/4
RD04398PLASTIC PIPE BEVELLER BT2
RD04354HEAVY DUTY
CARBIDE TIPPED
RD03496 TUBE CUTTER
RD04177 CUTTER RATCHET SHEARS 63MM RS
RD02742BENDER TUBE QUAD 3/16-3/8”
RD02746BENDER TUBE
3/8” TB06
RD02749BENDER TUBE 3/4” TB12
RD02960FIBREGLASS PROBE ROD FSPR4
RD02745BENDER TUBE
1/4” TB04
RD02748FLARING TOOL 3/16-5/8
RD02749BENDER TUBE 3/4” TB12
RD03317LOW CLEARANCE ROTARY CUTTER
RD03338PIPE CUTTER 1/2-2” 4 WHEEL
RD03416CUTTER TUBE 1/4-1 5/8” TC1.6Q
RD03485PVC/PE SHELL CUTTERS
RD03483CUTTER TUBE 1/8-1” T10
RD03480CUTTER TUBE 1/8-1 1/8” TC11
RD03475CUTTER TUBE 1/4-1 3/8 TC14
RD03430CUTTER TUBE 3/8-3 1/2” TC3Q
RD03495MINI TUBE CUTTER MC3
RD03487CUTTER TUBE 5/8-2 1/8” T20
RD04176 RS1 RATCHET
SHEARS
REED Cutters
REED Shears and Bits
REED Bender Tubes and Tools
REED Deburrers and Bevellers
REED Various Products
$2,676.20$299.90 $55.25 $88.20 $24.90$23.70$24.00$27.90$54.20$19.45$60.30
$18.50$92.50
$107.50$386.50$146.60$113.00
$61.30$187.00
$82.40
$385.40$84.00$25.80 $92.50
$68.90$51.80$37.20
$200.00$150.00
$8.00$8.00
$133.20 $150.00$333.90 $399.30$655.30
$1,028.60
LOW/C ROTARY CUTTER 16-18”PIPE CUTTER 1/2-2” 4 C/W GUIDES CUTTER TUBE 1/4-1 5/8” TC1.6Q CUTTER TUBE 3/8-3 1/2” TC3Q CUTTER TUBE 1/4-1 3/8” TC14CUTTER TUBE 1/8-1 1/8” TC11CUTTER TUBE 1/8-1” T10CUTTER TUBE 3/16-1 1/4” T15CUTTER TUBE 5/8-2 1/8” T20MINI TUBE MC3 (Cap: 1/8-1 1/8”)TUBE CUTTER (Cap: 3/4 2 1/8”)
RS1 RATCHET SHEARS (Cap: 42mm)CUTTER RATCHET SHEARS 63MM RSSHUT-OFF TOOL (Cap3/4-1”) SHUT-OFF TOOL (Cap: 1/2-2” CTS)H/DUTY CARBIDE - TIPPED (Cap: 1 7/16”)H/DUTY CARBIDE - TIPPED (Cap: 1 7/8”)STANDARD CARBIDE - TIPPED (Cap: 1 7/8”)D SERIES DRILL BIT (1” AWWA)PVC/PE SHELL CUTTERS (3/4” NPT & AWWA)
PLASTIC PIPE BEVELLER BT2DEBURRING FOR PLASTIC DEB4DEBURRING FOR PLASTIC DEB2 PIPE DESCALER BELT 3-12”
BENDER TUBE QUAD 3/16-3/8”BENDER TUBE 5/16” TB05BENDER TUBE 1/4” TB04BENDER TUBE 3/8” TB06FLARING TOOL 3/16-5/8”BENDER TUBE 3/4” TB12FLARE TOOL 45DEG 1/8-3/4” R45FIBREGLASS PROBE ROD FSPR4
RD03317RD03338 RD03416 RD03430 RD03475RD03480RD03483RD03485RD03487RD03495RD03496
RD04176RD04177RD04300RD04304RD04354RD04356RD04372RD04382RD04385
RD04398RD04430RD04436 RD08008
RD40336RD04505RD04724RD05815RD05855RD06110RD06118RD06158 RD06370RD06465 RD08200RD08500RD08508
RD04430 RD04436 RD08008PIPE DESCALER BELT 3-12”
RD06370V HEAD FOLDING PIPE STAND
RD04724 PPS24 PLASTIC PIPE SAW
RD04505INTERNAL SAW BLADE
RD08508ROLL GROOVER COMBO
RD08500ROLL GROOVER 1 1/4-6” RG6S
RD08200COPPER SHUT
OFF TOOL 3/4”-1”
RD05815 DIES
RD06465 STUD PUNCH
RD06110THREADING OIL
RD06158 OIL TRIGGER
ASSY KIT OLKIT1
13
WAS $38.00WAS $82.50WAS $66.50WAS $71.50WAS $84.50
WAS $296.50WAS $150.00
WAS $55.00
WAS $3120.00WAS $350.00
WAS $64.50WAS $103.00
WAS $29.00WAS $28.00WAS $28.00WAS $32.50WAS $63.50WAS $23.00WAS $70.50
WAS $27.10WAS $108.00WAS $125.50WAS $451.00WAS $171.00WAS $132.00
WAS $72.00WAS $218.00
WAS $96.00
WAS $450.00WAS $98.00WAS $30.00
WAS $108.00
WAS $80.50WAS $60.50WAS $44.00
WAS $300.00WAS $200.00
WAS $10.00WAS $9.00
WAS $155.00WAS $205.00WAS $400.00WAS $470.00WAS $765.00WAS $1,200.00
10” EXTENSION CHAIN WITH 8 PITCHESCUTTER LONG INTERNAL SAW BLADE PPS24 PLASTIC PIPE SAWDIES 1/2-3/4” NPT HSS UNIDIES 1/2-3/4” BSPT ALLOY UNIOIL THREADING CLEAR QUARTOIL THREADING DARK QUARTOIL TRIGGER ASSY KIT OLKIT1 V HEAD FOLDING PIPE STANDSTUD PUNCH 1 11/32/ 34.1MM COPPER SHUT OFF TOOL 3/4-1”ROLL GROOVER 1 1/4-6” RG6SROLL GROOVER COMBO
RD02742RD02743RD02745RD02746RD02748RD02749RD02758RD02960
$32.60$70.80$56.80$61.10$72.20
$254.10$128.60
$45.30
REMS Cropping Tongs
RM571890 Cropping Tong M8
RM571866 Cropping Tong
Insert M10
14 https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
ART: RM150020EX-PRESS CU SET 3/8 - 1”
Sets come with drive unit, respective expander heads in a steel case
REMS Ex-Press CU Set Hand Tube Expander. For making sockets yourself. 6-face mandrel for even and concentric expanding. Expander heads with calibration neck, fit other makes as well. REMS Ex-Press Cu Set. Hand tube expander Ø 8–42 mm, Ø 3⁄8–11⁄8”. Expander drive. Selected expander heads of 3⁄8-1⁄2-5⁄8-3⁄4-7⁄8-1” for pipes in mm or inch. In sturdy steel case.EXPANDER HEADSQuick-change. Extra long expander heads result in extra long sockets. Special neck at expander head specially for calibration of deformed pipe ends.
RM150020
REMS Hurrican H Set Economic manual tool for efficiently making T-branches for pipe installations without fittings.Hard and soft copper tubes Ø 10–22 mm, Ø 3/8–7/8”, s ≤ 1.5 mm. Set 3⁄8-1⁄2-5⁄8-3⁄4-7⁄8”.SYSTEM ADVANTAGEOnly one type of extractor tools for REMS Hurrican H, REMS Hurrican and REMS Twist/Hurrican.
RM151005
REMS Sinus Set Universal, robust hand tool for cold bending of pipes and tubes up to 180°. Can be used anywhere. REMS Sinus Set. Set 10-12-14-16-18-22. Hand tube bender Ø 10 – 32 mm, Ø 3/8 – 7/8”, up to 180°. Bender drive, insert bolt. Bending formers and back formers. REMS bending spray. In sturdy steel case.UNIVERSAL USEFor sanitary, heating, air conditioning, refrigerating and hy-draulic applications. Specially suited for tubes of pressfitting systems, for hard and half-hard copper tubes and for thin-walled copper heating tubes according to EN 1057.
RM154004
ART: RM151005HURRICAN H SET (3⁄8-1⁄2-5⁄8-3⁄4-7⁄8”)
SUPER STRONG WRENCHES
$35.00$45.00$55.00$75.00
$100.00
RM116000 RM116005RM116010RM116015RM116020
$180.00$180.00$180.00$135.00
RM571845RM571890RM571895RM571866
CROPPING TONGS 3/8 UNC M6 CROPPING TONG M8 CROPPING TONG M10 CROPPING TONG INSERT
WRENCH 1/2” CATCH S WRENCH 1” CATCH SWRENCH 1 1/2” CATCH S WRENCH 2” CATCH S WRENCH 3” CATCH S
The REMS range of wrenches are rugged quality tools for tough use and long service life. All-steel, drop forged. Swedish model according to DIN 5234 – Form C. Pipes Ø ≤ 3”. Nuts, bolts, flat material.
WRENCH 3” CATCH S
WRENCH 1/2” CATCH S
WRENCH 1” CATCH S
WRENCH 1 1/2” CATCH S
WRENCH 2” CATCH S
High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel M 6–M 12. UNC 3/8 - UNC 1/2”.
BEND CUT
SPECIALSART: RM154004 SINUS SET 10-12-14-16-18-22
Accessories
for the
Mini-Press
WAS $710.00 $347.00
WAS $977.80 $450.00
WAS $1,575.50 $750.00
WAS $78.50WAS $80.40WAS $98.80
WAS $146.00WAS $312.00
WAS $295.40WAS $295.40WAS $295.40WAS $153.00
15https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
RM50041-7-6MTR SHK RATCHET BUCKLE TIEDOWN 35MM - C/W S HOOKS
95003 RETRACTABLE
TIEDOWNRATCHET BUCKLE
TIEDOWN 35MM - C/W S HOOKS
ANCRA Heavy Duty CARGO NETS for Utes
Part No: ANC-NET-M Size: 1.8m x 2.2m
Part No: ANC-NET-L Size: 2.2m x 2.5m
*Ideal for keeping your load SAFE and SECURE
• All 4 sides have reinforced eyelets• Tie off ropes on each corner• Heavy Duty reinforced polyethylene netting• 30mm x 30mm mesh size
ANCRA Cargo Items
RATCHET BUCKLE TIEDOWN 35MM C/W S HOOKS
RETRACTABLE TIEDOWN RATCHET BUCKLE TIEDOWN 35MM - C/W S HOOKS
MOTORCYCLE WHEEL CHOCK
50041-7-6MTR SHK
95003
49603-10
49603-10 MOTORCYCLE WHEEL CHOCK
35mm x 6mtr ratchet buckle loadbinder c/w S hooks each end. 750kg LASHING CAPACITY
RETRACTABLE TIEDOWN25mm x 1.8m Retractable Ratchet Restraint TWIN Pack c/w PVC Coated Hooks
TRACKSTAR MOTORCYCLE WHEELCHOCKQuick connect to aircraft style L-Track. Fits tyre widths from 3.5” to 5.5”. Comes complete with mounting kit. Weight: 3.18kg.
WAS $66.50
WAS $61.50
$58.00$52.00
WAS $21.00 $18.00
WAS $28.00 $18.00
WAS $89.00 $65.00
Subj
ect t
o al
tera
tions
and
erro
rs. ©
Cop
yrig
ht 2
016
by A
NC
RA A
UST
RALI
A PT
Y LT
DPr
omot
ion
until
30T
H S
EPTE
MBE
R 20
16. O
ptio
nal e
xtra
s. C
all f
or p
ricin
g on
180
0 4
2627
2.
1800 4 26272www.ancraaustralia.com
CONTACT US FOR YOUR NEAREST DEALER AUSTRALIA-WIDE
https://www.facebook.com/ancraaustralia https://twitter.com/AncraAustralia * ALL STOCK GST INCLUSIVE
DrillingDeburring
Screw Driving
Private message us
your Email address ON FACEBOOK
to go into the running to win a REMS
drill PLUS bit set.
WIN!Competition closes :
30th September, 2016
WORTH $370.00
12 Month Warranty
Lifetime Warranty
https://www.facebook.com/ancraaustralia