Serial Connection RS232
Grid
Turbine
40 * 30 watt
Add new input and output in the fpga
0/1 Valves
New tempeture and pressure sensors and actuators
All new inputs and output add in FPGA FIFO.
Reading in cRIO and Calculate output.
Sending back output signal to FPGA.
Temp before and after turbine.
Temp before and after generators.
New Inputs
New Outputs
Signals for two on/off valves.
For display we can use our crio com port or any pc com port.
V. Pump on/off or analog signal from user or any case dependent
28 Bubles
28 Bubles
28 Bubles28 Bubles33Bubles
28 Bubles
35 watt 34 Lamps
15 or 16 switchs
35*36=1260 watt
30*40=1200watt
Design Patern Company logo
36 lamps
40 lamps
40 watt 28Lamps
11 switchs
lamp per switch 2 and 3
Design Patern star
42 watt 28Lamps
14 switchs
2 or 3 lamps per switch
42 *28=1176 watt
42*29=1218 watt
Design Patern Circular
42 watt 29Lamps
14 switchs
lamps per switch 2 and 3
Design Patern Rectangulaer
Green Turbine• 3 phase Ac frequency 1000 Hz.• High speed 30,000 rpm.• 1.2 kW power output.
G
3 phase Ac 1000Hz
Rectifier
Dc 180VDc/Ac 230 V Ac
50Hz
230 V Ac 50 Hz out for our lamp Circuit.
Circuit for Lampe
Using current divider rule calculate branch current. Maximum branch current needs to select relays. Maximum current 5.21 Amp, when Turbine will produce 1.2 Kw.